V4L/DVB (7514): media/dvb/frontends replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 1aa2539f..49f5587 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -43,7 +43,7 @@
if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
printk ("%s: i2c write error (addr %02x, err == %i)\n",
- __FUNCTION__, state->config->demod_address, err);
+ __func__, state->config->demod_address, err);
return -EREMOTEIO;
}
@@ -65,7 +65,7 @@
{
printk("%s: writereg error "
"(reg %03x, data %03x, ret == %i)\n",
- __FUNCTION__, reg & 0xffff, data & 0xffff, ret);
+ __func__, reg & 0xffff, data & 0xffff, ret);
return ret;
}
}
@@ -82,7 +82,7 @@
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
- printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
+ printk("%s: readreg error (ret == %i)\n", __func__, ret);
return -1;
}
@@ -91,7 +91,7 @@
static void sp887x_microcontroller_stop (struct sp887x_state* state)
{
- dprintk("%s\n", __FUNCTION__);
+ dprintk("%s\n", __func__);
sp887x_writereg(state, 0xf08, 0x000);
sp887x_writereg(state, 0xf09, 0x000);
@@ -101,7 +101,7 @@
static void sp887x_microcontroller_start (struct sp887x_state* state)
{
- dprintk("%s\n", __FUNCTION__);
+ dprintk("%s\n", __func__);
sp887x_writereg(state, 0xf08, 0x000);
sp887x_writereg(state, 0xf09, 0x000);
@@ -112,7 +112,7 @@
static void sp887x_setup_agc (struct sp887x_state* state)
{
/* setup AGC parameters */
- dprintk("%s\n", __FUNCTION__);
+ dprintk("%s\n", __func__);
sp887x_writereg(state, 0x33c, 0x054);
sp887x_writereg(state, 0x33b, 0x04c);
sp887x_writereg(state, 0x328, 0x000);
@@ -142,7 +142,7 @@
int fw_size = fw->size;
unsigned char *mem = fw->data;
- dprintk("%s\n", __FUNCTION__);
+ dprintk("%s\n", __func__);
/* ignore the first 10 bytes, then we expect 0x4000 bytes of firmware */
if (fw_size < FW_SIZE+10)
@@ -155,7 +155,7 @@
sp887x_microcontroller_stop (state);
- printk ("%s: firmware upload... ", __FUNCTION__);
+ printk ("%s: firmware upload... ", __func__);
/* setup write pointer to -1 (end of memory) */
/* bit 0x8000 in address is set to enable 13bit mode */
@@ -181,7 +181,7 @@
if ((err = i2c_writebytes (state, buf, c+2)) < 0) {
printk ("failed.\n");
- printk ("%s: i2c error (err == %i)\n", __FUNCTION__, err);
+ printk ("%s: i2c error (err == %i)\n", __func__, err);
return err;
}
}