| /* |
| * Copyright (C) ST-Ericsson SA 2010 |
| * |
| * License Terms: GNU General Public License, version 2 |
| * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/of.h> |
| #include <linux/mfd/stmpe.h> |
| #include <linux/seq_file.h> |
| |
| /* |
| * These registers are modified under the irq bus lock and cached to avoid |
| * unnecessary writes in bus_sync_unlock. |
| */ |
| enum { REG_RE, REG_FE, REG_IE }; |
| |
| #define CACHE_NR_REGS 3 |
| /* No variant has more than 24 GPIOs */ |
| #define CACHE_NR_BANKS (24 / 8) |
| |
| struct stmpe_gpio { |
| struct gpio_chip chip; |
| struct stmpe *stmpe; |
| struct device *dev; |
| struct mutex irq_lock; |
| u32 norequest_mask; |
| /* Caches of interrupt control registers for bus_lock */ |
| u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; |
| u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; |
| }; |
| |
| static inline struct stmpe_gpio *to_stmpe_gpio(struct gpio_chip *chip) |
| { |
| return container_of(chip, struct stmpe_gpio, chip); |
| } |
| |
| static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB] - (offset / 8); |
| u8 mask = 1 << (offset % 8); |
| int ret; |
| |
| ret = stmpe_reg_read(stmpe, reg); |
| if (ret < 0) |
| return ret; |
| |
| return !!(ret & mask); |
| } |
| |
| static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| { |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; |
| u8 reg = stmpe->regs[which] - (offset / 8); |
| u8 mask = 1 << (offset % 8); |
| |
| /* |
| * Some variants have single register for gpio set/clear functionality. |
| * For them we need to write 0 to clear and 1 to set. |
| */ |
| if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB]) |
| stmpe_set_bits(stmpe, reg, mask, val ? mask : 0); |
| else |
| stmpe_reg_write(stmpe, reg, mask); |
| } |
| |
| static int stmpe_gpio_direction_output(struct gpio_chip *chip, |
| unsigned offset, int val) |
| { |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); |
| u8 mask = 1 << (offset % 8); |
| |
| stmpe_gpio_set(chip, offset, val); |
| |
| return stmpe_set_bits(stmpe, reg, mask, mask); |
| } |
| |
| static int stmpe_gpio_direction_input(struct gpio_chip *chip, |
| unsigned offset) |
| { |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); |
| u8 mask = 1 << (offset % 8); |
| |
| return stmpe_set_bits(stmpe, reg, mask, 0); |
| } |
| |
| static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset) |
| { |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| |
| if (stmpe_gpio->norequest_mask & (1 << offset)) |
| return -EINVAL; |
| |
| return stmpe_set_altfunc(stmpe, 1 << offset, STMPE_BLOCK_GPIO); |
| } |
| |
| static struct gpio_chip template_chip = { |
| .label = "stmpe", |
| .owner = THIS_MODULE, |
| .direction_input = stmpe_gpio_direction_input, |
| .get = stmpe_gpio_get, |
| .direction_output = stmpe_gpio_direction_output, |
| .set = stmpe_gpio_set, |
| .request = stmpe_gpio_request, |
| .can_sleep = true, |
| }; |
| |
| static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(gc); |
| int offset = d->hwirq; |
| int regoffset = offset / 8; |
| int mask = 1 << (offset % 8); |
| |
| if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH) |
| return -EINVAL; |
| |
| /* STMPE801 doesn't have RE and FE registers */ |
| if (stmpe_gpio->stmpe->partnum == STMPE801) |
| return 0; |
| |
| if (type & IRQ_TYPE_EDGE_RISING) |
| stmpe_gpio->regs[REG_RE][regoffset] |= mask; |
| else |
| stmpe_gpio->regs[REG_RE][regoffset] &= ~mask; |
| |
| if (type & IRQ_TYPE_EDGE_FALLING) |
| stmpe_gpio->regs[REG_FE][regoffset] |= mask; |
| else |
| stmpe_gpio->regs[REG_FE][regoffset] &= ~mask; |
| |
| return 0; |
| } |
| |
| static void stmpe_gpio_irq_lock(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(gc); |
| |
| mutex_lock(&stmpe_gpio->irq_lock); |
| } |
| |
| static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(gc); |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); |
| static const u8 regmap[] = { |
| [REG_RE] = STMPE_IDX_GPRER_LSB, |
| [REG_FE] = STMPE_IDX_GPFER_LSB, |
| [REG_IE] = STMPE_IDX_IEGPIOR_LSB, |
| }; |
| int i, j; |
| |
| for (i = 0; i < CACHE_NR_REGS; i++) { |
| /* STMPE801 doesn't have RE and FE registers */ |
| if ((stmpe->partnum == STMPE801) && |
| (i != REG_IE)) |
| continue; |
| |
| for (j = 0; j < num_banks; j++) { |
| u8 old = stmpe_gpio->oldregs[i][j]; |
| u8 new = stmpe_gpio->regs[i][j]; |
| |
| if (new == old) |
| continue; |
| |
| stmpe_gpio->oldregs[i][j] = new; |
| stmpe_reg_write(stmpe, stmpe->regs[regmap[i]] - j, new); |
| } |
| } |
| |
| mutex_unlock(&stmpe_gpio->irq_lock); |
| } |
| |
| static void stmpe_gpio_irq_mask(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(gc); |
| int offset = d->hwirq; |
| int regoffset = offset / 8; |
| int mask = 1 << (offset % 8); |
| |
| stmpe_gpio->regs[REG_IE][regoffset] &= ~mask; |
| } |
| |
| static void stmpe_gpio_irq_unmask(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(gc); |
| int offset = d->hwirq; |
| int regoffset = offset / 8; |
| int mask = 1 << (offset % 8); |
| |
| stmpe_gpio->regs[REG_IE][regoffset] |= mask; |
| } |
| |
| static void stmpe_dbg_show_one(struct seq_file *s, |
| struct gpio_chip *gc, |
| unsigned offset, unsigned gpio) |
| { |
| struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(gc); |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| const char *label = gpiochip_is_requested(gc, offset); |
| int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); |
| bool val = !!stmpe_gpio_get(gc, offset); |
| u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); |
| u8 mask = 1 << (offset % 8); |
| int ret; |
| u8 dir; |
| |
| ret = stmpe_reg_read(stmpe, dir_reg); |
| if (ret < 0) |
| return; |
| dir = !!(ret & mask); |
| |
| if (dir) { |
| seq_printf(s, " gpio-%-3d (%-20.20s) out %s", |
| gpio, label ?: "(none)", |
| val ? "hi" : "lo"); |
| } else { |
| u8 edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_MSB] + num_banks - 1 - (offset / 8); |
| u8 rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB] - (offset / 8); |
| u8 fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB] - (offset / 8); |
| u8 irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB] - (offset / 8); |
| bool edge_det; |
| bool rise; |
| bool fall; |
| bool irqen; |
| |
| ret = stmpe_reg_read(stmpe, edge_det_reg); |
| if (ret < 0) |
| return; |
| edge_det = !!(ret & mask); |
| ret = stmpe_reg_read(stmpe, rise_reg); |
| if (ret < 0) |
| return; |
| rise = !!(ret & mask); |
| ret = stmpe_reg_read(stmpe, fall_reg); |
| if (ret < 0) |
| return; |
| fall = !!(ret & mask); |
| ret = stmpe_reg_read(stmpe, irqen_reg); |
| if (ret < 0) |
| return; |
| irqen = !!(ret & mask); |
| |
| seq_printf(s, " gpio-%-3d (%-20.20s) in %s %s %s%s%s", |
| gpio, label ?: "(none)", |
| val ? "hi" : "lo", |
| edge_det ? "edge-asserted" : "edge-inactive", |
| irqen ? "IRQ-enabled" : "", |
| rise ? " rising-edge-detection" : "", |
| fall ? " falling-edge-detection" : ""); |
| } |
| } |
| |
| static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc) |
| { |
| unsigned i; |
| unsigned gpio = gc->base; |
| |
| for (i = 0; i < gc->ngpio; i++, gpio++) { |
| stmpe_dbg_show_one(s, gc, i, gpio); |
| seq_printf(s, "\n"); |
| } |
| } |
| |
| static struct irq_chip stmpe_gpio_irq_chip = { |
| .name = "stmpe-gpio", |
| .irq_bus_lock = stmpe_gpio_irq_lock, |
| .irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock, |
| .irq_mask = stmpe_gpio_irq_mask, |
| .irq_unmask = stmpe_gpio_irq_unmask, |
| .irq_set_type = stmpe_gpio_irq_set_type, |
| }; |
| |
| static irqreturn_t stmpe_gpio_irq(int irq, void *dev) |
| { |
| struct stmpe_gpio *stmpe_gpio = dev; |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| u8 statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; |
| int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); |
| u8 status[num_banks]; |
| int ret; |
| int i; |
| |
| ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); |
| if (ret < 0) |
| return IRQ_NONE; |
| |
| for (i = 0; i < num_banks; i++) { |
| int bank = num_banks - i - 1; |
| unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; |
| unsigned int stat = status[i]; |
| |
| stat &= enabled; |
| if (!stat) |
| continue; |
| |
| while (stat) { |
| int bit = __ffs(stat); |
| int line = bank * 8 + bit; |
| int child_irq = irq_find_mapping(stmpe_gpio->chip.irqdomain, |
| line); |
| |
| handle_nested_irq(child_irq); |
| stat &= ~(1 << bit); |
| } |
| |
| stmpe_reg_write(stmpe, statmsbreg + i, status[i]); |
| |
| /* Edge detect register is not present on 801 */ |
| if (stmpe->partnum != STMPE801) |
| stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] |
| + i, status[i]); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int stmpe_gpio_probe(struct platform_device *pdev) |
| { |
| struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); |
| struct device_node *np = pdev->dev.of_node; |
| struct stmpe_gpio *stmpe_gpio; |
| int ret; |
| int irq = 0; |
| |
| irq = platform_get_irq(pdev, 0); |
| |
| stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL); |
| if (!stmpe_gpio) |
| return -ENOMEM; |
| |
| mutex_init(&stmpe_gpio->irq_lock); |
| |
| stmpe_gpio->dev = &pdev->dev; |
| stmpe_gpio->stmpe = stmpe; |
| stmpe_gpio->chip = template_chip; |
| stmpe_gpio->chip.ngpio = stmpe->num_gpios; |
| stmpe_gpio->chip.dev = &pdev->dev; |
| stmpe_gpio->chip.of_node = np; |
| stmpe_gpio->chip.base = -1; |
| |
| if (IS_ENABLED(CONFIG_DEBUG_FS)) |
| stmpe_gpio->chip.dbg_show = stmpe_dbg_show; |
| |
| of_property_read_u32(np, "st,norequest-mask", |
| &stmpe_gpio->norequest_mask); |
| |
| if (irq < 0) |
| dev_info(&pdev->dev, |
| "device configured in no-irq mode: " |
| "irqs are not available\n"); |
| |
| ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); |
| if (ret) |
| goto out_free; |
| |
| ret = gpiochip_add(&stmpe_gpio->chip); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); |
| goto out_disable; |
| } |
| |
| if (irq > 0) { |
| ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, |
| stmpe_gpio_irq, IRQF_ONESHOT, |
| "stmpe-gpio", stmpe_gpio); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to get irq: %d\n", ret); |
| goto out_disable; |
| } |
| ret = gpiochip_irqchip_add(&stmpe_gpio->chip, |
| &stmpe_gpio_irq_chip, |
| 0, |
| handle_simple_irq, |
| IRQ_TYPE_NONE); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "could not connect irqchip to gpiochip\n"); |
| goto out_disable; |
| } |
| |
| gpiochip_set_chained_irqchip(&stmpe_gpio->chip, |
| &stmpe_gpio_irq_chip, |
| irq, |
| NULL); |
| } |
| |
| platform_set_drvdata(pdev, stmpe_gpio); |
| |
| return 0; |
| |
| out_disable: |
| stmpe_disable(stmpe, STMPE_BLOCK_GPIO); |
| gpiochip_remove(&stmpe_gpio->chip); |
| out_free: |
| kfree(stmpe_gpio); |
| return ret; |
| } |
| |
| static int stmpe_gpio_remove(struct platform_device *pdev) |
| { |
| struct stmpe_gpio *stmpe_gpio = platform_get_drvdata(pdev); |
| struct stmpe *stmpe = stmpe_gpio->stmpe; |
| |
| gpiochip_remove(&stmpe_gpio->chip); |
| stmpe_disable(stmpe, STMPE_BLOCK_GPIO); |
| kfree(stmpe_gpio); |
| |
| return 0; |
| } |
| |
| static struct platform_driver stmpe_gpio_driver = { |
| .driver.name = "stmpe-gpio", |
| .driver.owner = THIS_MODULE, |
| .probe = stmpe_gpio_probe, |
| .remove = stmpe_gpio_remove, |
| }; |
| |
| static int __init stmpe_gpio_init(void) |
| { |
| return platform_driver_register(&stmpe_gpio_driver); |
| } |
| subsys_initcall(stmpe_gpio_init); |
| |
| static void __exit stmpe_gpio_exit(void) |
| { |
| platform_driver_unregister(&stmpe_gpio_driver); |
| } |
| module_exit(stmpe_gpio_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("STMPExxxx GPIO driver"); |
| MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); |