spi/omap2_mcspi: Verify TX reg is empty after TX only xfer with DMA
In case of TX only with DMA, the driver assumes that the data
has been transferred once DMA callback in invoked. However,
SPI's shift register may still contain data. Thus, the driver
is supposed to verify that the register is empty and the end of
the SPI transfer has been reached.
Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 27a3fa1..2a651e6 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -296,6 +296,19 @@
return 0;
}
+static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(1000);
+ while (!(__raw_readl(reg) & bit)) {
+ if (time_after(jiffies, timeout))
+ return -1;
+ cpu_relax();
+ }
+ return 0;
+}
+
static unsigned
omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
{
@@ -309,11 +322,14 @@
u32 l;
u8 * rx;
const u8 * tx;
+ void __iomem *chstat_reg;
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
l = mcspi_cached_chconf0(spi);
+ chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
+
count = xfer->len;
c = count;
word_len = cs->word_len;
@@ -382,6 +398,16 @@
if (tx != NULL) {
wait_for_completion(&mcspi_dma->dma_tx_completion);
dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE);
+
+ /* for TX_ONLY mode, be sure all words have shifted out */
+ if (rx == NULL) {
+ if (mcspi_wait_for_reg_bit(chstat_reg,
+ OMAP2_MCSPI_CHSTAT_TXS) < 0)
+ dev_err(&spi->dev, "TXS timed out\n");
+ else if (mcspi_wait_for_reg_bit(chstat_reg,
+ OMAP2_MCSPI_CHSTAT_EOT) < 0)
+ dev_err(&spi->dev, "EOT timed out\n");
+ }
}
if (rx != NULL) {
@@ -435,19 +461,6 @@
return count;
}
-static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
-{
- unsigned long timeout;
-
- timeout = jiffies + msecs_to_jiffies(1000);
- while (!(__raw_readl(reg) & bit)) {
- if (time_after(jiffies, timeout))
- return -1;
- cpu_relax();
- }
- return 0;
-}
-
static unsigned
omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
{