| /* |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2010 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * Contact Information: |
| * Intel Corporation |
| * 2200 Mission College Blvd. |
| * Santa Clara, CA 97052 |
| * |
| * This provides access methods for PCI registers that mis-behave on |
| * the CE4100. Each register can be assigned a private init, read and |
| * write routine. The exception to this is the bridge device. The |
| * bridge device is the only device on bus zero (0) that requires any |
| * fixup so it is a special case ATM |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| |
| #include <asm/ce4100.h> |
| #include <asm/pci_x86.h> |
| |
| struct sim_reg { |
| u32 value; |
| u32 mask; |
| }; |
| |
| struct sim_dev_reg { |
| int dev_func; |
| int reg; |
| void (*init)(struct sim_dev_reg *reg); |
| void (*read)(struct sim_dev_reg *reg, u32 *value); |
| void (*write)(struct sim_dev_reg *reg, u32 value); |
| struct sim_reg sim_reg; |
| }; |
| |
| struct sim_reg_op { |
| void (*init)(struct sim_dev_reg *reg); |
| void (*read)(struct sim_dev_reg *reg, u32 value); |
| void (*write)(struct sim_dev_reg *reg, u32 value); |
| }; |
| |
| #define MB (1024 * 1024) |
| #define KB (1024) |
| #define SIZE_TO_MASK(size) (~(size - 1)) |
| |
| #define DEFINE_REG(device, func, offset, size, init_op, read_op, write_op)\ |
| { PCI_DEVFN(device, func), offset, init_op, read_op, write_op,\ |
| {0, SIZE_TO_MASK(size)} }, |
| |
| static void reg_init(struct sim_dev_reg *reg) |
| { |
| pci_direct_conf1.read(0, 1, reg->dev_func, reg->reg, 4, |
| ®->sim_reg.value); |
| } |
| |
| static void reg_read(struct sim_dev_reg *reg, u32 *value) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&pci_config_lock, flags); |
| *value = reg->sim_reg.value; |
| raw_spin_unlock_irqrestore(&pci_config_lock, flags); |
| } |
| |
| static void reg_write(struct sim_dev_reg *reg, u32 value) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&pci_config_lock, flags); |
| reg->sim_reg.value = (value & reg->sim_reg.mask) | |
| (reg->sim_reg.value & ~reg->sim_reg.mask); |
| raw_spin_unlock_irqrestore(&pci_config_lock, flags); |
| } |
| |
| static void sata_reg_init(struct sim_dev_reg *reg) |
| { |
| pci_direct_conf1.read(0, 1, PCI_DEVFN(14, 0), 0x10, 4, |
| ®->sim_reg.value); |
| reg->sim_reg.value += 0x400; |
| } |
| |
| static void ehci_reg_read(struct sim_dev_reg *reg, u32 *value) |
| { |
| reg_read(reg, value); |
| if (*value != reg->sim_reg.mask) |
| *value |= 0x100; |
| } |
| |
| void sata_revid_init(struct sim_dev_reg *reg) |
| { |
| reg->sim_reg.value = 0x01060100; |
| reg->sim_reg.mask = 0; |
| } |
| |
| static void sata_revid_read(struct sim_dev_reg *reg, u32 *value) |
| { |
| reg_read(reg, value); |
| } |
| |
| static struct sim_dev_reg bus1_fixups[] = { |
| DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write) |
| DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(2, 1, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(3, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(4, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(4, 1, 0x10, (128*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(6, 0, 0x10, (512*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(6, 1, 0x10, (512*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(6, 2, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(8, 0, 0x10, (1*MB), reg_init, reg_read, reg_write) |
| DEFINE_REG(8, 1, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(8, 2, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(9, 0, 0x10 , (1*MB), reg_init, reg_read, reg_write) |
| DEFINE_REG(9, 0, 0x14, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(10, 0, 0x10, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(10, 0, 0x14, (256*MB), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 0, 0x10, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 0, 0x14, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 1, 0x10, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 2, 0x10, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 2, 0x14, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 2, 0x18, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 3, 0x10, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 3, 0x14, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 4, 0x10, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write) |
| DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write) |
| DEFINE_REG(13, 0, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write) |
| DEFINE_REG(13, 1, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write) |
| DEFINE_REG(14, 0, 0x8, 0, sata_revid_init, sata_revid_read, 0) |
| DEFINE_REG(14, 0, 0x10, 0, reg_init, reg_read, reg_write) |
| DEFINE_REG(14, 0, 0x14, 0, reg_init, reg_read, reg_write) |
| DEFINE_REG(14, 0, 0x18, 0, reg_init, reg_read, reg_write) |
| DEFINE_REG(14, 0, 0x1C, 0, reg_init, reg_read, reg_write) |
| DEFINE_REG(14, 0, 0x20, 0, reg_init, reg_read, reg_write) |
| DEFINE_REG(14, 0, 0x24, (0x200), sata_reg_init, reg_read, reg_write) |
| DEFINE_REG(15, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(15, 0, 0x14, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write) |
| DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write) |
| DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) |
| DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write) |
| }; |
| |
| static void __init init_sim_regs(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { |
| if (bus1_fixups[i].init) |
| bus1_fixups[i].init(&bus1_fixups[i]); |
| } |
| } |
| |
| static inline void extract_bytes(u32 *value, int reg, int len) |
| { |
| uint32_t mask; |
| |
| *value >>= ((reg & 3) * 8); |
| mask = 0xFFFFFFFF >> ((4 - len) * 8); |
| *value &= mask; |
| } |
| |
| int bridge_read(unsigned int devfn, int reg, int len, u32 *value) |
| { |
| u32 av_bridge_base, av_bridge_limit; |
| int retval = 0; |
| |
| switch (reg) { |
| /* Make BARs appear to not request any memory. */ |
| case PCI_BASE_ADDRESS_0: |
| case PCI_BASE_ADDRESS_0 + 1: |
| case PCI_BASE_ADDRESS_0 + 2: |
| case PCI_BASE_ADDRESS_0 + 3: |
| *value = 0; |
| break; |
| |
| /* Since subordinate bus number register is hardwired |
| * to zero and read only, so do the simulation. |
| */ |
| case PCI_PRIMARY_BUS: |
| if (len == 4) |
| *value = 0x00010100; |
| break; |
| |
| case PCI_SUBORDINATE_BUS: |
| *value = 1; |
| break; |
| |
| case PCI_MEMORY_BASE: |
| case PCI_MEMORY_LIMIT: |
| /* Get the A/V bridge base address. */ |
| pci_direct_conf1.read(0, 0, devfn, |
| PCI_BASE_ADDRESS_0, 4, &av_bridge_base); |
| |
| av_bridge_limit = av_bridge_base + (512*MB - 1); |
| av_bridge_limit >>= 16; |
| av_bridge_limit &= 0xFFF0; |
| |
| av_bridge_base >>= 16; |
| av_bridge_base &= 0xFFF0; |
| |
| if (reg == PCI_MEMORY_LIMIT) |
| *value = av_bridge_limit; |
| else if (len == 2) |
| *value = av_bridge_base; |
| else |
| *value = (av_bridge_limit << 16) | av_bridge_base; |
| break; |
| /* Make prefetchable memory limit smaller than prefetchable |
| * memory base, so not claim prefetchable memory space. |
| */ |
| case PCI_PREF_MEMORY_BASE: |
| *value = 0xFFF0; |
| break; |
| case PCI_PREF_MEMORY_LIMIT: |
| *value = 0x0; |
| break; |
| /* Make IO limit smaller than IO base, so not claim IO space. */ |
| case PCI_IO_BASE: |
| *value = 0xF0; |
| break; |
| case PCI_IO_LIMIT: |
| *value = 0; |
| break; |
| default: |
| retval = 1; |
| } |
| return retval; |
| } |
| |
| static int ce4100_conf_read(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 *value) |
| { |
| int i, retval = 1; |
| |
| if (bus == 1) { |
| for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { |
| if (bus1_fixups[i].dev_func == devfn && |
| bus1_fixups[i].reg == (reg & ~3) && |
| bus1_fixups[i].read) { |
| bus1_fixups[i].read(&(bus1_fixups[i]), |
| value); |
| extract_bytes(value, reg, len); |
| return 0; |
| } |
| } |
| } |
| |
| if (bus == 0 && (PCI_DEVFN(1, 0) == devfn) && |
| !bridge_read(devfn, reg, len, value)) |
| return 0; |
| |
| return pci_direct_conf1.read(seg, bus, devfn, reg, len, value); |
| } |
| |
| static int ce4100_conf_write(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 value) |
| { |
| int i; |
| |
| if (bus == 1) { |
| for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { |
| if (bus1_fixups[i].dev_func == devfn && |
| bus1_fixups[i].reg == (reg & ~3) && |
| bus1_fixups[i].write) { |
| bus1_fixups[i].write(&(bus1_fixups[i]), |
| value); |
| return 0; |
| } |
| } |
| } |
| |
| /* Discard writes to A/V bridge BAR. */ |
| if (bus == 0 && PCI_DEVFN(1, 0) == devfn && |
| ((reg & ~3) == PCI_BASE_ADDRESS_0)) |
| return 0; |
| |
| return pci_direct_conf1.write(seg, bus, devfn, reg, len, value); |
| } |
| |
| struct pci_raw_ops ce4100_pci_conf = { |
| .read = ce4100_conf_read, |
| .write = ce4100_conf_write, |
| }; |
| |
| int __init ce4100_pci_init(void) |
| { |
| init_sim_regs(); |
| raw_pci_ops = &ce4100_pci_conf; |
| /* Indicate caller that it should invoke pci_legacy_init() */ |
| return 1; |
| } |