| /* |
| * Acer WMI Laptop Extras |
| * |
| * Copyright (C) 2007-2009 Carlos Corbacho <carlos@strangeworlds.co.uk> |
| * |
| * Based on acer_acpi: |
| * Copyright (C) 2005-2007 E.M. Smith |
| * Copyright (C) 2007-2008 Carlos Corbacho <cathectic@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/dmi.h> |
| #include <linux/fb.h> |
| #include <linux/backlight.h> |
| #include <linux/leds.h> |
| #include <linux/platform_device.h> |
| #include <linux/acpi.h> |
| #include <linux/i8042.h> |
| #include <linux/rfkill.h> |
| #include <linux/workqueue.h> |
| #include <linux/debugfs.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/input/sparse-keymap.h> |
| #include <linux/dmi.h> |
| |
| #include <acpi/acpi_drivers.h> |
| |
| MODULE_AUTHOR("Carlos Corbacho"); |
| MODULE_DESCRIPTION("Acer Laptop WMI Extras Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| #define ACER_LOGPREFIX "acer-wmi: " |
| #define ACER_ERR KERN_ERR ACER_LOGPREFIX |
| #define ACER_NOTICE KERN_NOTICE ACER_LOGPREFIX |
| #define ACER_INFO KERN_INFO ACER_LOGPREFIX |
| #define ACER_WARNING KERN_WARNING ACER_LOGPREFIX |
| |
| /* |
| * Magic Number |
| * Meaning is unknown - this number is required for writing to ACPI for AMW0 |
| * (it's also used in acerhk when directly accessing the BIOS) |
| */ |
| #define ACER_AMW0_WRITE 0x9610 |
| |
| /* |
| * Bit masks for the AMW0 interface |
| */ |
| #define ACER_AMW0_WIRELESS_MASK 0x35 |
| #define ACER_AMW0_BLUETOOTH_MASK 0x34 |
| #define ACER_AMW0_MAILLED_MASK 0x31 |
| |
| /* |
| * Method IDs for WMID interface |
| */ |
| #define ACER_WMID_GET_WIRELESS_METHODID 1 |
| #define ACER_WMID_GET_BLUETOOTH_METHODID 2 |
| #define ACER_WMID_GET_BRIGHTNESS_METHODID 3 |
| #define ACER_WMID_SET_WIRELESS_METHODID 4 |
| #define ACER_WMID_SET_BLUETOOTH_METHODID 5 |
| #define ACER_WMID_SET_BRIGHTNESS_METHODID 6 |
| #define ACER_WMID_GET_THREEG_METHODID 10 |
| #define ACER_WMID_SET_THREEG_METHODID 11 |
| |
| /* |
| * Acer ACPI method GUIDs |
| */ |
| #define AMW0_GUID1 "67C3371D-95A3-4C37-BB61-DD47B491DAAB" |
| #define AMW0_GUID2 "431F16ED-0C2B-444C-B267-27DEB140CF9C" |
| #define WMID_GUID1 "6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3" |
| #define WMID_GUID2 "95764E09-FB56-4e83-B31A-37761F60994A" |
| #define WMID_GUID3 "61EF69EA-865C-4BC3-A502-A0DEBA0CB531" |
| |
| /* |
| * Acer ACPI event GUIDs |
| */ |
| #define ACERWMID_EVENT_GUID "676AA15E-6A47-4D9F-A2CC-1E6D18D14026" |
| |
| MODULE_ALIAS("wmi:67C3371D-95A3-4C37-BB61-DD47B491DAAB"); |
| MODULE_ALIAS("wmi:6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"); |
| MODULE_ALIAS("wmi:676AA15E-6A47-4D9F-A2CC-1E6D18D14026"); |
| |
| enum acer_wmi_event_ids { |
| WMID_HOTKEY_EVENT = 0x1, |
| }; |
| |
| static const struct key_entry acer_wmi_keymap[] = { |
| {KE_KEY, 0x01, {KEY_WLAN} }, /* WiFi */ |
| {KE_KEY, 0x12, {KEY_BLUETOOTH} }, /* BT */ |
| {KE_KEY, 0x21, {KEY_PROG1} }, /* Backup */ |
| {KE_KEY, 0x22, {KEY_PROG2} }, /* Arcade */ |
| {KE_KEY, 0x23, {KEY_PROG3} }, /* P_Key */ |
| {KE_KEY, 0x24, {KEY_PROG4} }, /* Social networking_Key */ |
| {KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */ |
| {KE_KEY, 0x82, {KEY_F22} }, /* Touch Pad On/Off */ |
| {KE_END, 0} |
| }; |
| |
| static struct input_dev *acer_wmi_input_dev; |
| |
| struct event_return_value { |
| u8 function; |
| u8 key_num; |
| u16 device_state; |
| u32 reserved; |
| } __attribute__((packed)); |
| |
| /* |
| * GUID3 Get Device Status device flags |
| */ |
| #define ACER_WMID3_GDS_WIRELESS (1<<0) /* WiFi */ |
| #define ACER_WMID3_GDS_THREEG (1<<6) /* 3G */ |
| #define ACER_WMID3_GDS_BLUETOOTH (1<<11) /* BT */ |
| |
| struct lm_input_params { |
| u8 function_num; /* Function Number */ |
| u16 commun_devices; /* Communication type devices default status */ |
| u16 devices; /* Other type devices default status */ |
| u8 lm_status; /* Launch Manager Status */ |
| u16 reserved; |
| } __attribute__((packed)); |
| |
| struct lm_return_value { |
| u8 error_code; /* Error Code */ |
| u8 ec_return_value; /* EC Return Value */ |
| u16 reserved; |
| } __attribute__((packed)); |
| |
| struct wmid3_gds_input_param { /* Get Device Status input parameter */ |
| u8 function_num; /* Function Number */ |
| u8 hotkey_number; /* Hotkey Number */ |
| u16 devices; /* Get Device */ |
| } __attribute__((packed)); |
| |
| struct wmid3_gds_return_value { /* Get Device Status return value*/ |
| u8 error_code; /* Error Code */ |
| u8 ec_return_value; /* EC Return Value */ |
| u16 devices; /* Current Device Status */ |
| u32 reserved; |
| } __attribute__((packed)); |
| |
| struct hotkey_function_type_aa { |
| u8 type; |
| u8 length; |
| u16 handle; |
| u16 commun_func_bitmap; |
| } __attribute__((packed)); |
| |
| /* |
| * Interface capability flags |
| */ |
| #define ACER_CAP_MAILLED (1<<0) |
| #define ACER_CAP_WIRELESS (1<<1) |
| #define ACER_CAP_BLUETOOTH (1<<2) |
| #define ACER_CAP_BRIGHTNESS (1<<3) |
| #define ACER_CAP_THREEG (1<<4) |
| #define ACER_CAP_ANY (0xFFFFFFFF) |
| |
| /* |
| * Interface type flags |
| */ |
| enum interface_flags { |
| ACER_AMW0, |
| ACER_AMW0_V2, |
| ACER_WMID, |
| }; |
| |
| #define ACER_DEFAULT_WIRELESS 0 |
| #define ACER_DEFAULT_BLUETOOTH 0 |
| #define ACER_DEFAULT_MAILLED 0 |
| #define ACER_DEFAULT_THREEG 0 |
| |
| static int max_brightness = 0xF; |
| |
| static int mailled = -1; |
| static int brightness = -1; |
| static int threeg = -1; |
| static int force_series; |
| static bool ec_raw_mode; |
| static bool has_type_aa; |
| |
| module_param(mailled, int, 0444); |
| module_param(brightness, int, 0444); |
| module_param(threeg, int, 0444); |
| module_param(force_series, int, 0444); |
| module_param(ec_raw_mode, bool, 0444); |
| MODULE_PARM_DESC(mailled, "Set initial state of Mail LED"); |
| MODULE_PARM_DESC(brightness, "Set initial LCD backlight brightness"); |
| MODULE_PARM_DESC(threeg, "Set initial state of 3G hardware"); |
| MODULE_PARM_DESC(force_series, "Force a different laptop series"); |
| MODULE_PARM_DESC(ec_raw_mode, "Enable EC raw mode"); |
| |
| struct acer_data { |
| int mailled; |
| int threeg; |
| int brightness; |
| }; |
| |
| struct acer_debug { |
| struct dentry *root; |
| struct dentry *devices; |
| u32 wmid_devices; |
| }; |
| |
| static struct rfkill *wireless_rfkill; |
| static struct rfkill *bluetooth_rfkill; |
| static struct rfkill *threeg_rfkill; |
| |
| /* Each low-level interface must define at least some of the following */ |
| struct wmi_interface { |
| /* The WMI device type */ |
| u32 type; |
| |
| /* The capabilities this interface provides */ |
| u32 capability; |
| |
| /* Private data for the current interface */ |
| struct acer_data data; |
| |
| /* debugfs entries associated with this interface */ |
| struct acer_debug debug; |
| }; |
| |
| /* The static interface pointer, points to the currently detected interface */ |
| static struct wmi_interface *interface; |
| |
| /* |
| * Embedded Controller quirks |
| * Some laptops require us to directly access the EC to either enable or query |
| * features that are not available through WMI. |
| */ |
| |
| struct quirk_entry { |
| u8 wireless; |
| u8 mailled; |
| s8 brightness; |
| u8 bluetooth; |
| }; |
| |
| static struct quirk_entry *quirks; |
| |
| static void set_quirks(void) |
| { |
| if (!interface) |
| return; |
| |
| if (quirks->mailled) |
| interface->capability |= ACER_CAP_MAILLED; |
| |
| if (quirks->brightness) |
| interface->capability |= ACER_CAP_BRIGHTNESS; |
| } |
| |
| static int dmi_matched(const struct dmi_system_id *dmi) |
| { |
| quirks = dmi->driver_data; |
| return 1; |
| } |
| |
| static struct quirk_entry quirk_unknown = { |
| }; |
| |
| static struct quirk_entry quirk_acer_aspire_1520 = { |
| .brightness = -1, |
| }; |
| |
| static struct quirk_entry quirk_acer_travelmate_2490 = { |
| .mailled = 1, |
| }; |
| |
| /* This AMW0 laptop has no bluetooth */ |
| static struct quirk_entry quirk_medion_md_98300 = { |
| .wireless = 1, |
| }; |
| |
| static struct quirk_entry quirk_fujitsu_amilo_li_1718 = { |
| .wireless = 2, |
| }; |
| |
| /* The Aspire One has a dummy ACPI-WMI interface - disable it */ |
| static struct dmi_system_id __devinitdata acer_blacklist[] = { |
| { |
| .ident = "Acer Aspire One (SSD)", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), |
| }, |
| }, |
| { |
| .ident = "Acer Aspire One (HDD)", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"), |
| }, |
| }, |
| {} |
| }; |
| |
| static struct dmi_system_id acer_quirks[] = { |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 1360", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"), |
| }, |
| .driver_data = &quirk_acer_aspire_1520, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 1520", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1520"), |
| }, |
| .driver_data = &quirk_acer_aspire_1520, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 3100", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 3610", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3610"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 5100", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 5610", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 5630", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 5650", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 5680", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer Aspire 9110", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer TravelMate 2490", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Acer TravelMate 4200", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4200"), |
| }, |
| .driver_data = &quirk_acer_travelmate_2490, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Fujitsu Siemens Amilo Li 1718", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Li 1718"), |
| }, |
| .driver_data = &quirk_fujitsu_amilo_li_1718, |
| }, |
| { |
| .callback = dmi_matched, |
| .ident = "Medion MD 98300", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "WAM2030"), |
| }, |
| .driver_data = &quirk_medion_md_98300, |
| }, |
| {} |
| }; |
| |
| /* Find which quirks are needed for a particular vendor/ model pair */ |
| static void find_quirks(void) |
| { |
| if (!force_series) { |
| dmi_check_system(acer_quirks); |
| } else if (force_series == 2490) { |
| quirks = &quirk_acer_travelmate_2490; |
| } |
| |
| if (quirks == NULL) |
| quirks = &quirk_unknown; |
| |
| set_quirks(); |
| } |
| |
| /* |
| * General interface convenience methods |
| */ |
| |
| static bool has_cap(u32 cap) |
| { |
| if ((interface->capability & cap) != 0) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| * AMW0 (V1) interface |
| */ |
| struct wmab_args { |
| u32 eax; |
| u32 ebx; |
| u32 ecx; |
| u32 edx; |
| }; |
| |
| struct wmab_ret { |
| u32 eax; |
| u32 ebx; |
| u32 ecx; |
| u32 edx; |
| u32 eex; |
| }; |
| |
| static acpi_status wmab_execute(struct wmab_args *regbuf, |
| struct acpi_buffer *result) |
| { |
| struct acpi_buffer input; |
| acpi_status status; |
| input.length = sizeof(struct wmab_args); |
| input.pointer = (u8 *)regbuf; |
| |
| status = wmi_evaluate_method(AMW0_GUID1, 1, 1, &input, result); |
| |
| return status; |
| } |
| |
| static acpi_status AMW0_get_u32(u32 *value, u32 cap, |
| struct wmi_interface *iface) |
| { |
| int err; |
| u8 result; |
| |
| switch (cap) { |
| case ACER_CAP_MAILLED: |
| switch (quirks->mailled) { |
| default: |
| err = ec_read(0xA, &result); |
| if (err) |
| return AE_ERROR; |
| *value = (result >> 7) & 0x1; |
| return AE_OK; |
| } |
| break; |
| case ACER_CAP_WIRELESS: |
| switch (quirks->wireless) { |
| case 1: |
| err = ec_read(0x7B, &result); |
| if (err) |
| return AE_ERROR; |
| *value = result & 0x1; |
| return AE_OK; |
| case 2: |
| err = ec_read(0x71, &result); |
| if (err) |
| return AE_ERROR; |
| *value = result & 0x1; |
| return AE_OK; |
| default: |
| err = ec_read(0xA, &result); |
| if (err) |
| return AE_ERROR; |
| *value = (result >> 2) & 0x1; |
| return AE_OK; |
| } |
| break; |
| case ACER_CAP_BLUETOOTH: |
| switch (quirks->bluetooth) { |
| default: |
| err = ec_read(0xA, &result); |
| if (err) |
| return AE_ERROR; |
| *value = (result >> 4) & 0x1; |
| return AE_OK; |
| } |
| break; |
| case ACER_CAP_BRIGHTNESS: |
| switch (quirks->brightness) { |
| default: |
| err = ec_read(0x83, &result); |
| if (err) |
| return AE_ERROR; |
| *value = result; |
| return AE_OK; |
| } |
| break; |
| default: |
| return AE_ERROR; |
| } |
| return AE_OK; |
| } |
| |
| static acpi_status AMW0_set_u32(u32 value, u32 cap, struct wmi_interface *iface) |
| { |
| struct wmab_args args; |
| |
| args.eax = ACER_AMW0_WRITE; |
| args.ebx = value ? (1<<8) : 0; |
| args.ecx = args.edx = 0; |
| |
| switch (cap) { |
| case ACER_CAP_MAILLED: |
| if (value > 1) |
| return AE_BAD_PARAMETER; |
| args.ebx |= ACER_AMW0_MAILLED_MASK; |
| break; |
| case ACER_CAP_WIRELESS: |
| if (value > 1) |
| return AE_BAD_PARAMETER; |
| args.ebx |= ACER_AMW0_WIRELESS_MASK; |
| break; |
| case ACER_CAP_BLUETOOTH: |
| if (value > 1) |
| return AE_BAD_PARAMETER; |
| args.ebx |= ACER_AMW0_BLUETOOTH_MASK; |
| break; |
| case ACER_CAP_BRIGHTNESS: |
| if (value > max_brightness) |
| return AE_BAD_PARAMETER; |
| switch (quirks->brightness) { |
| default: |
| return ec_write(0x83, value); |
| break; |
| } |
| default: |
| return AE_ERROR; |
| } |
| |
| /* Actually do the set */ |
| return wmab_execute(&args, NULL); |
| } |
| |
| static acpi_status AMW0_find_mailled(void) |
| { |
| struct wmab_args args; |
| struct wmab_ret ret; |
| acpi_status status = AE_OK; |
| struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *obj; |
| |
| args.eax = 0x86; |
| args.ebx = args.ecx = args.edx = 0; |
| |
| status = wmab_execute(&args, &out); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| obj = (union acpi_object *) out.pointer; |
| if (obj && obj->type == ACPI_TYPE_BUFFER && |
| obj->buffer.length == sizeof(struct wmab_ret)) { |
| ret = *((struct wmab_ret *) obj->buffer.pointer); |
| } else { |
| kfree(out.pointer); |
| return AE_ERROR; |
| } |
| |
| if (ret.eex & 0x1) |
| interface->capability |= ACER_CAP_MAILLED; |
| |
| kfree(out.pointer); |
| |
| return AE_OK; |
| } |
| |
| static acpi_status AMW0_set_capabilities(void) |
| { |
| struct wmab_args args; |
| struct wmab_ret ret; |
| acpi_status status; |
| struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *obj; |
| |
| /* |
| * On laptops with this strange GUID (non Acer), normal probing doesn't |
| * work. |
| */ |
| if (wmi_has_guid(AMW0_GUID2)) { |
| interface->capability |= ACER_CAP_WIRELESS; |
| return AE_OK; |
| } |
| |
| args.eax = ACER_AMW0_WRITE; |
| args.ecx = args.edx = 0; |
| |
| args.ebx = 0xa2 << 8; |
| args.ebx |= ACER_AMW0_WIRELESS_MASK; |
| |
| status = wmab_execute(&args, &out); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| obj = out.pointer; |
| if (obj && obj->type == ACPI_TYPE_BUFFER && |
| obj->buffer.length == sizeof(struct wmab_ret)) { |
| ret = *((struct wmab_ret *) obj->buffer.pointer); |
| } else { |
| status = AE_ERROR; |
| goto out; |
| } |
| |
| if (ret.eax & 0x1) |
| interface->capability |= ACER_CAP_WIRELESS; |
| |
| args.ebx = 2 << 8; |
| args.ebx |= ACER_AMW0_BLUETOOTH_MASK; |
| |
| /* |
| * It's ok to use existing buffer for next wmab_execute call. |
| * But we need to kfree(out.pointer) if next wmab_execute fail. |
| */ |
| status = wmab_execute(&args, &out); |
| if (ACPI_FAILURE(status)) |
| goto out; |
| |
| obj = (union acpi_object *) out.pointer; |
| if (obj && obj->type == ACPI_TYPE_BUFFER |
| && obj->buffer.length == sizeof(struct wmab_ret)) { |
| ret = *((struct wmab_ret *) obj->buffer.pointer); |
| } else { |
| status = AE_ERROR; |
| goto out; |
| } |
| |
| if (ret.eax & 0x1) |
| interface->capability |= ACER_CAP_BLUETOOTH; |
| |
| /* |
| * This appears to be safe to enable, since all Wistron based laptops |
| * appear to use the same EC register for brightness, even if they |
| * differ for wireless, etc |
| */ |
| if (quirks->brightness >= 0) |
| interface->capability |= ACER_CAP_BRIGHTNESS; |
| |
| status = AE_OK; |
| out: |
| kfree(out.pointer); |
| return status; |
| } |
| |
| static struct wmi_interface AMW0_interface = { |
| .type = ACER_AMW0, |
| }; |
| |
| static struct wmi_interface AMW0_V2_interface = { |
| .type = ACER_AMW0_V2, |
| }; |
| |
| /* |
| * New interface (The WMID interface) |
| */ |
| static acpi_status |
| WMI_execute_u32(u32 method_id, u32 in, u32 *out) |
| { |
| struct acpi_buffer input = { (acpi_size) sizeof(u32), (void *)(&in) }; |
| struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *obj; |
| u32 tmp; |
| acpi_status status; |
| |
| status = wmi_evaluate_method(WMID_GUID1, 1, method_id, &input, &result); |
| |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| obj = (union acpi_object *) result.pointer; |
| if (obj && obj->type == ACPI_TYPE_BUFFER && |
| obj->buffer.length == sizeof(u32)) { |
| tmp = *((u32 *) obj->buffer.pointer); |
| } else { |
| tmp = 0; |
| } |
| |
| if (out) |
| *out = tmp; |
| |
| kfree(result.pointer); |
| |
| return status; |
| } |
| |
| static acpi_status WMID_get_u32(u32 *value, u32 cap, |
| struct wmi_interface *iface) |
| { |
| acpi_status status; |
| u8 tmp; |
| u32 result, method_id = 0; |
| |
| switch (cap) { |
| case ACER_CAP_WIRELESS: |
| method_id = ACER_WMID_GET_WIRELESS_METHODID; |
| break; |
| case ACER_CAP_BLUETOOTH: |
| method_id = ACER_WMID_GET_BLUETOOTH_METHODID; |
| break; |
| case ACER_CAP_BRIGHTNESS: |
| method_id = ACER_WMID_GET_BRIGHTNESS_METHODID; |
| break; |
| case ACER_CAP_THREEG: |
| method_id = ACER_WMID_GET_THREEG_METHODID; |
| break; |
| case ACER_CAP_MAILLED: |
| if (quirks->mailled == 1) { |
| ec_read(0x9f, &tmp); |
| *value = tmp & 0x1; |
| return 0; |
| } |
| default: |
| return AE_ERROR; |
| } |
| status = WMI_execute_u32(method_id, 0, &result); |
| |
| if (ACPI_SUCCESS(status)) |
| *value = (u8)result; |
| |
| return status; |
| } |
| |
| static acpi_status WMID_set_u32(u32 value, u32 cap, struct wmi_interface *iface) |
| { |
| u32 method_id = 0; |
| char param; |
| |
| switch (cap) { |
| case ACER_CAP_BRIGHTNESS: |
| if (value > max_brightness) |
| return AE_BAD_PARAMETER; |
| method_id = ACER_WMID_SET_BRIGHTNESS_METHODID; |
| break; |
| case ACER_CAP_WIRELESS: |
| if (value > 1) |
| return AE_BAD_PARAMETER; |
| method_id = ACER_WMID_SET_WIRELESS_METHODID; |
| break; |
| case ACER_CAP_BLUETOOTH: |
| if (value > 1) |
| return AE_BAD_PARAMETER; |
| method_id = ACER_WMID_SET_BLUETOOTH_METHODID; |
| break; |
| case ACER_CAP_THREEG: |
| if (value > 1) |
| return AE_BAD_PARAMETER; |
| method_id = ACER_WMID_SET_THREEG_METHODID; |
| break; |
| case ACER_CAP_MAILLED: |
| if (value > 1) |
| return AE_BAD_PARAMETER; |
| if (quirks->mailled == 1) { |
| param = value ? 0x92 : 0x93; |
| i8042_lock_chip(); |
| i8042_command(¶m, 0x1059); |
| i8042_unlock_chip(); |
| return 0; |
| } |
| break; |
| default: |
| return AE_ERROR; |
| } |
| return WMI_execute_u32(method_id, (u32)value, NULL); |
| } |
| |
| static void type_aa_dmi_decode(const struct dmi_header *header, void *dummy) |
| { |
| struct hotkey_function_type_aa *type_aa; |
| |
| /* We are looking for OEM-specific Type AAh */ |
| if (header->type != 0xAA) |
| return; |
| |
| has_type_aa = true; |
| type_aa = (struct hotkey_function_type_aa *) header; |
| |
| printk(ACER_INFO "Function bitmap for Communication Button: 0x%x\n", |
| type_aa->commun_func_bitmap); |
| |
| if (type_aa->commun_func_bitmap & ACER_WMID3_GDS_WIRELESS) |
| interface->capability |= ACER_CAP_WIRELESS; |
| if (type_aa->commun_func_bitmap & ACER_WMID3_GDS_THREEG) |
| interface->capability |= ACER_CAP_THREEG; |
| if (type_aa->commun_func_bitmap & ACER_WMID3_GDS_BLUETOOTH) |
| interface->capability |= ACER_CAP_BLUETOOTH; |
| } |
| |
| static acpi_status WMID_set_capabilities(void) |
| { |
| struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL}; |
| union acpi_object *obj; |
| acpi_status status; |
| u32 devices; |
| |
| status = wmi_query_block(WMID_GUID2, 1, &out); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| obj = (union acpi_object *) out.pointer; |
| if (obj && obj->type == ACPI_TYPE_BUFFER && |
| obj->buffer.length == sizeof(u32)) { |
| devices = *((u32 *) obj->buffer.pointer); |
| } else { |
| kfree(out.pointer); |
| return AE_ERROR; |
| } |
| |
| dmi_walk(type_aa_dmi_decode, NULL); |
| if (!has_type_aa) { |
| interface->capability |= ACER_CAP_WIRELESS; |
| interface->capability |= ACER_CAP_THREEG; |
| if (devices & 0x10) |
| interface->capability |= ACER_CAP_BLUETOOTH; |
| } |
| |
| /* WMID always provides brightness methods */ |
| interface->capability |= ACER_CAP_BRIGHTNESS; |
| |
| if (!(devices & 0x20)) |
| max_brightness = 0x9; |
| |
| kfree(out.pointer); |
| return status; |
| } |
| |
| static struct wmi_interface wmid_interface = { |
| .type = ACER_WMID, |
| }; |
| |
| /* |
| * Generic Device (interface-independent) |
| */ |
| |
| static acpi_status get_u32(u32 *value, u32 cap) |
| { |
| acpi_status status = AE_ERROR; |
| |
| switch (interface->type) { |
| case ACER_AMW0: |
| status = AMW0_get_u32(value, cap, interface); |
| break; |
| case ACER_AMW0_V2: |
| if (cap == ACER_CAP_MAILLED) { |
| status = AMW0_get_u32(value, cap, interface); |
| break; |
| } |
| case ACER_WMID: |
| status = WMID_get_u32(value, cap, interface); |
| break; |
| } |
| |
| return status; |
| } |
| |
| static acpi_status set_u32(u32 value, u32 cap) |
| { |
| acpi_status status; |
| |
| if (interface->capability & cap) { |
| switch (interface->type) { |
| case ACER_AMW0: |
| return AMW0_set_u32(value, cap, interface); |
| case ACER_AMW0_V2: |
| if (cap == ACER_CAP_MAILLED) |
| return AMW0_set_u32(value, cap, interface); |
| |
| /* |
| * On some models, some WMID methods don't toggle |
| * properly. For those cases, we want to run the AMW0 |
| * method afterwards to be certain we've really toggled |
| * the device state. |
| */ |
| if (cap == ACER_CAP_WIRELESS || |
| cap == ACER_CAP_BLUETOOTH) { |
| status = WMID_set_u32(value, cap, interface); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| return AMW0_set_u32(value, cap, interface); |
| } |
| case ACER_WMID: |
| return WMID_set_u32(value, cap, interface); |
| default: |
| return AE_BAD_PARAMETER; |
| } |
| } |
| return AE_BAD_PARAMETER; |
| } |
| |
| static void __init acer_commandline_init(void) |
| { |
| /* |
| * These will all fail silently if the value given is invalid, or the |
| * capability isn't available on the given interface |
| */ |
| set_u32(mailled, ACER_CAP_MAILLED); |
| if (!has_type_aa) |
| set_u32(threeg, ACER_CAP_THREEG); |
| set_u32(brightness, ACER_CAP_BRIGHTNESS); |
| } |
| |
| /* |
| * LED device (Mail LED only, no other LEDs known yet) |
| */ |
| static void mail_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| set_u32(value, ACER_CAP_MAILLED); |
| } |
| |
| static struct led_classdev mail_led = { |
| .name = "acer-wmi::mail", |
| .brightness_set = mail_led_set, |
| }; |
| |
| static int __devinit acer_led_init(struct device *dev) |
| { |
| return led_classdev_register(dev, &mail_led); |
| } |
| |
| static void acer_led_exit(void) |
| { |
| led_classdev_unregister(&mail_led); |
| } |
| |
| /* |
| * Backlight device |
| */ |
| static struct backlight_device *acer_backlight_device; |
| |
| static int read_brightness(struct backlight_device *bd) |
| { |
| u32 value; |
| get_u32(&value, ACER_CAP_BRIGHTNESS); |
| return value; |
| } |
| |
| static int update_bl_status(struct backlight_device *bd) |
| { |
| int intensity = bd->props.brightness; |
| |
| if (bd->props.power != FB_BLANK_UNBLANK) |
| intensity = 0; |
| if (bd->props.fb_blank != FB_BLANK_UNBLANK) |
| intensity = 0; |
| |
| set_u32(intensity, ACER_CAP_BRIGHTNESS); |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops acer_bl_ops = { |
| .get_brightness = read_brightness, |
| .update_status = update_bl_status, |
| }; |
| |
| static int __devinit acer_backlight_init(struct device *dev) |
| { |
| struct backlight_properties props; |
| struct backlight_device *bd; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.max_brightness = max_brightness; |
| bd = backlight_device_register("acer-wmi", dev, NULL, &acer_bl_ops, |
| &props); |
| if (IS_ERR(bd)) { |
| printk(ACER_ERR "Could not register Acer backlight device\n"); |
| acer_backlight_device = NULL; |
| return PTR_ERR(bd); |
| } |
| |
| acer_backlight_device = bd; |
| |
| bd->props.power = FB_BLANK_UNBLANK; |
| bd->props.brightness = read_brightness(bd); |
| backlight_update_status(bd); |
| return 0; |
| } |
| |
| static void acer_backlight_exit(void) |
| { |
| backlight_device_unregister(acer_backlight_device); |
| } |
| |
| static acpi_status wmid3_get_device_status(u32 *value, u16 device) |
| { |
| struct wmid3_gds_return_value return_value; |
| acpi_status status; |
| union acpi_object *obj; |
| struct wmid3_gds_input_param params = { |
| .function_num = 0x1, |
| .hotkey_number = 0x01, |
| .devices = device, |
| }; |
| struct acpi_buffer input = { |
| sizeof(struct wmid3_gds_input_param), |
| ¶ms |
| }; |
| struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; |
| |
| status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| obj = output.pointer; |
| |
| if (!obj) |
| return AE_ERROR; |
| else if (obj->type != ACPI_TYPE_BUFFER) { |
| kfree(obj); |
| return AE_ERROR; |
| } |
| if (obj->buffer.length != 8) { |
| printk(ACER_WARNING "Unknown buffer length %d\n", |
| obj->buffer.length); |
| kfree(obj); |
| return AE_ERROR; |
| } |
| |
| return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer); |
| kfree(obj); |
| |
| if (return_value.error_code || return_value.ec_return_value) |
| printk(ACER_WARNING "Get Device Status failed: " |
| "0x%x - 0x%x\n", return_value.error_code, |
| return_value.ec_return_value); |
| else |
| *value = !!(return_value.devices & device); |
| |
| return status; |
| } |
| |
| static acpi_status get_device_status(u32 *value, u32 cap) |
| { |
| if (wmi_has_guid(WMID_GUID3)) { |
| u16 device; |
| |
| switch (cap) { |
| case ACER_CAP_WIRELESS: |
| device = ACER_WMID3_GDS_WIRELESS; |
| break; |
| case ACER_CAP_BLUETOOTH: |
| device = ACER_WMID3_GDS_BLUETOOTH; |
| break; |
| case ACER_CAP_THREEG: |
| device = ACER_WMID3_GDS_THREEG; |
| break; |
| default: |
| return AE_ERROR; |
| } |
| return wmid3_get_device_status(value, device); |
| |
| } else { |
| return get_u32(value, cap); |
| } |
| } |
| |
| /* |
| * Rfkill devices |
| */ |
| static void acer_rfkill_update(struct work_struct *ignored); |
| static DECLARE_DELAYED_WORK(acer_rfkill_work, acer_rfkill_update); |
| static void acer_rfkill_update(struct work_struct *ignored) |
| { |
| u32 state; |
| acpi_status status; |
| |
| status = get_u32(&state, ACER_CAP_WIRELESS); |
| if (ACPI_SUCCESS(status)) |
| rfkill_set_sw_state(wireless_rfkill, !state); |
| |
| if (has_cap(ACER_CAP_BLUETOOTH)) { |
| status = get_u32(&state, ACER_CAP_BLUETOOTH); |
| if (ACPI_SUCCESS(status)) |
| rfkill_set_sw_state(bluetooth_rfkill, !state); |
| } |
| |
| if (has_cap(ACER_CAP_THREEG) && wmi_has_guid(WMID_GUID3)) { |
| status = wmid3_get_device_status(&state, |
| ACER_WMID3_GDS_THREEG); |
| if (ACPI_SUCCESS(status)) |
| rfkill_set_sw_state(threeg_rfkill, !state); |
| } |
| |
| schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ)); |
| } |
| |
| static int acer_rfkill_set(void *data, bool blocked) |
| { |
| acpi_status status; |
| u32 cap = (unsigned long)data; |
| status = set_u32(!blocked, cap); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| return 0; |
| } |
| |
| static const struct rfkill_ops acer_rfkill_ops = { |
| .set_block = acer_rfkill_set, |
| }; |
| |
| static struct rfkill *acer_rfkill_register(struct device *dev, |
| enum rfkill_type type, |
| char *name, u32 cap) |
| { |
| int err; |
| struct rfkill *rfkill_dev; |
| u32 state; |
| acpi_status status; |
| |
| rfkill_dev = rfkill_alloc(name, dev, type, |
| &acer_rfkill_ops, |
| (void *)(unsigned long)cap); |
| if (!rfkill_dev) |
| return ERR_PTR(-ENOMEM); |
| |
| status = get_device_status(&state, cap); |
| if (ACPI_SUCCESS(status)) |
| rfkill_init_sw_state(rfkill_dev, !state); |
| |
| err = rfkill_register(rfkill_dev); |
| if (err) { |
| rfkill_destroy(rfkill_dev); |
| return ERR_PTR(err); |
| } |
| return rfkill_dev; |
| } |
| |
| static int acer_rfkill_init(struct device *dev) |
| { |
| wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN, |
| "acer-wireless", ACER_CAP_WIRELESS); |
| if (IS_ERR(wireless_rfkill)) |
| return PTR_ERR(wireless_rfkill); |
| |
| if (has_cap(ACER_CAP_BLUETOOTH)) { |
| bluetooth_rfkill = acer_rfkill_register(dev, |
| RFKILL_TYPE_BLUETOOTH, "acer-bluetooth", |
| ACER_CAP_BLUETOOTH); |
| if (IS_ERR(bluetooth_rfkill)) { |
| rfkill_unregister(wireless_rfkill); |
| rfkill_destroy(wireless_rfkill); |
| return PTR_ERR(bluetooth_rfkill); |
| } |
| } |
| |
| if (has_cap(ACER_CAP_THREEG)) { |
| threeg_rfkill = acer_rfkill_register(dev, |
| RFKILL_TYPE_WWAN, "acer-threeg", |
| ACER_CAP_THREEG); |
| if (IS_ERR(threeg_rfkill)) { |
| rfkill_unregister(wireless_rfkill); |
| rfkill_destroy(wireless_rfkill); |
| rfkill_unregister(bluetooth_rfkill); |
| rfkill_destroy(bluetooth_rfkill); |
| return PTR_ERR(threeg_rfkill); |
| } |
| } |
| |
| schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ)); |
| |
| return 0; |
| } |
| |
| static void acer_rfkill_exit(void) |
| { |
| cancel_delayed_work_sync(&acer_rfkill_work); |
| |
| rfkill_unregister(wireless_rfkill); |
| rfkill_destroy(wireless_rfkill); |
| |
| if (has_cap(ACER_CAP_BLUETOOTH)) { |
| rfkill_unregister(bluetooth_rfkill); |
| rfkill_destroy(bluetooth_rfkill); |
| } |
| |
| if (has_cap(ACER_CAP_THREEG)) { |
| rfkill_unregister(threeg_rfkill); |
| rfkill_destroy(threeg_rfkill); |
| } |
| return; |
| } |
| |
| /* |
| * sysfs interface |
| */ |
| static ssize_t show_bool_threeg(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| u32 result; \ |
| acpi_status status; |
| if (wmi_has_guid(WMID_GUID3)) |
| status = wmid3_get_device_status(&result, |
| ACER_WMID3_GDS_THREEG); |
| else |
| status = get_u32(&result, ACER_CAP_THREEG); |
| if (ACPI_SUCCESS(status)) |
| return sprintf(buf, "%u\n", result); |
| return sprintf(buf, "Read error\n"); |
| } |
| |
| static ssize_t set_bool_threeg(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| u32 tmp = simple_strtoul(buf, NULL, 10); |
| acpi_status status = set_u32(tmp, ACER_CAP_THREEG); |
| if (ACPI_FAILURE(status)) |
| return -EINVAL; |
| return count; |
| } |
| static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg, |
| set_bool_threeg); |
| |
| static ssize_t show_interface(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| switch (interface->type) { |
| case ACER_AMW0: |
| return sprintf(buf, "AMW0\n"); |
| case ACER_AMW0_V2: |
| return sprintf(buf, "AMW0 v2\n"); |
| case ACER_WMID: |
| return sprintf(buf, "WMID\n"); |
| default: |
| return sprintf(buf, "Error!\n"); |
| } |
| } |
| |
| static DEVICE_ATTR(interface, S_IRUGO, show_interface, NULL); |
| |
| static void acer_wmi_notify(u32 value, void *context) |
| { |
| struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *obj; |
| struct event_return_value return_value; |
| acpi_status status; |
| |
| status = wmi_get_event_data(value, &response); |
| if (status != AE_OK) { |
| printk(ACER_WARNING "bad event status 0x%x\n", status); |
| return; |
| } |
| |
| obj = (union acpi_object *)response.pointer; |
| |
| if (!obj) |
| return; |
| if (obj->type != ACPI_TYPE_BUFFER) { |
| printk(ACER_WARNING "Unknown response received %d\n", |
| obj->type); |
| kfree(obj); |
| return; |
| } |
| if (obj->buffer.length != 8) { |
| printk(ACER_WARNING "Unknown buffer length %d\n", |
| obj->buffer.length); |
| kfree(obj); |
| return; |
| } |
| |
| return_value = *((struct event_return_value *)obj->buffer.pointer); |
| kfree(obj); |
| |
| switch (return_value.function) { |
| case WMID_HOTKEY_EVENT: |
| if (!sparse_keymap_report_event(acer_wmi_input_dev, |
| return_value.key_num, 1, true)) |
| printk(ACER_WARNING "Unknown key number - 0x%x\n", |
| return_value.key_num); |
| break; |
| default: |
| printk(ACER_WARNING "Unknown function number - %d - %d\n", |
| return_value.function, return_value.key_num); |
| break; |
| } |
| } |
| |
| static acpi_status |
| wmid3_set_lm_mode(struct lm_input_params *params, |
| struct lm_return_value *return_value) |
| { |
| acpi_status status; |
| union acpi_object *obj; |
| |
| struct acpi_buffer input = { sizeof(struct lm_input_params), params }; |
| struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; |
| |
| status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &input, &output); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| obj = output.pointer; |
| |
| if (!obj) |
| return AE_ERROR; |
| else if (obj->type != ACPI_TYPE_BUFFER) { |
| kfree(obj); |
| return AE_ERROR; |
| } |
| if (obj->buffer.length != 4) { |
| printk(ACER_WARNING "Unknown buffer length %d\n", |
| obj->buffer.length); |
| kfree(obj); |
| return AE_ERROR; |
| } |
| |
| *return_value = *((struct lm_return_value *)obj->buffer.pointer); |
| kfree(obj); |
| |
| return status; |
| } |
| |
| static int acer_wmi_enable_ec_raw(void) |
| { |
| struct lm_return_value return_value; |
| acpi_status status; |
| struct lm_input_params params = { |
| .function_num = 0x1, |
| .commun_devices = 0xFFFF, |
| .devices = 0xFFFF, |
| .lm_status = 0x00, /* Launch Manager Deactive */ |
| }; |
| |
| status = wmid3_set_lm_mode(¶ms, &return_value); |
| |
| if (return_value.error_code || return_value.ec_return_value) |
| printk(ACER_WARNING "Enabling EC raw mode failed: " |
| "0x%x - 0x%x\n", return_value.error_code, |
| return_value.ec_return_value); |
| else |
| printk(ACER_INFO "Enabled EC raw mode"); |
| |
| return status; |
| } |
| |
| static int acer_wmi_enable_lm(void) |
| { |
| struct lm_return_value return_value; |
| acpi_status status; |
| struct lm_input_params params = { |
| .function_num = 0x1, |
| .commun_devices = 0xFFFF, |
| .devices = 0xFFFF, |
| .lm_status = 0x01, /* Launch Manager Active */ |
| }; |
| |
| status = wmid3_set_lm_mode(¶ms, &return_value); |
| |
| if (return_value.error_code || return_value.ec_return_value) |
| printk(ACER_WARNING "Enabling Launch Manager failed: " |
| "0x%x - 0x%x\n", return_value.error_code, |
| return_value.ec_return_value); |
| |
| return status; |
| } |
| |
| static int __init acer_wmi_input_setup(void) |
| { |
| acpi_status status; |
| int err; |
| |
| acer_wmi_input_dev = input_allocate_device(); |
| if (!acer_wmi_input_dev) |
| return -ENOMEM; |
| |
| acer_wmi_input_dev->name = "Acer WMI hotkeys"; |
| acer_wmi_input_dev->phys = "wmi/input0"; |
| acer_wmi_input_dev->id.bustype = BUS_HOST; |
| |
| err = sparse_keymap_setup(acer_wmi_input_dev, acer_wmi_keymap, NULL); |
| if (err) |
| goto err_free_dev; |
| |
| status = wmi_install_notify_handler(ACERWMID_EVENT_GUID, |
| acer_wmi_notify, NULL); |
| if (ACPI_FAILURE(status)) { |
| err = -EIO; |
| goto err_free_keymap; |
| } |
| |
| err = input_register_device(acer_wmi_input_dev); |
| if (err) |
| goto err_uninstall_notifier; |
| |
| return 0; |
| |
| err_uninstall_notifier: |
| wmi_remove_notify_handler(ACERWMID_EVENT_GUID); |
| err_free_keymap: |
| sparse_keymap_free(acer_wmi_input_dev); |
| err_free_dev: |
| input_free_device(acer_wmi_input_dev); |
| return err; |
| } |
| |
| static void acer_wmi_input_destroy(void) |
| { |
| wmi_remove_notify_handler(ACERWMID_EVENT_GUID); |
| sparse_keymap_free(acer_wmi_input_dev); |
| input_unregister_device(acer_wmi_input_dev); |
| } |
| |
| /* |
| * debugfs functions |
| */ |
| static u32 get_wmid_devices(void) |
| { |
| struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL}; |
| union acpi_object *obj; |
| acpi_status status; |
| u32 devices = 0; |
| |
| status = wmi_query_block(WMID_GUID2, 1, &out); |
| if (ACPI_FAILURE(status)) |
| return 0; |
| |
| obj = (union acpi_object *) out.pointer; |
| if (obj && obj->type == ACPI_TYPE_BUFFER && |
| obj->buffer.length == sizeof(u32)) { |
| devices = *((u32 *) obj->buffer.pointer); |
| } |
| |
| kfree(out.pointer); |
| return devices; |
| } |
| |
| /* |
| * Platform device |
| */ |
| static int __devinit acer_platform_probe(struct platform_device *device) |
| { |
| int err; |
| |
| if (has_cap(ACER_CAP_MAILLED)) { |
| err = acer_led_init(&device->dev); |
| if (err) |
| goto error_mailled; |
| } |
| |
| if (has_cap(ACER_CAP_BRIGHTNESS)) { |
| err = acer_backlight_init(&device->dev); |
| if (err) |
| goto error_brightness; |
| } |
| |
| err = acer_rfkill_init(&device->dev); |
| if (err) |
| goto error_rfkill; |
| |
| return err; |
| |
| error_rfkill: |
| if (has_cap(ACER_CAP_BRIGHTNESS)) |
| acer_backlight_exit(); |
| error_brightness: |
| if (has_cap(ACER_CAP_MAILLED)) |
| acer_led_exit(); |
| error_mailled: |
| return err; |
| } |
| |
| static int acer_platform_remove(struct platform_device *device) |
| { |
| if (has_cap(ACER_CAP_MAILLED)) |
| acer_led_exit(); |
| if (has_cap(ACER_CAP_BRIGHTNESS)) |
| acer_backlight_exit(); |
| |
| acer_rfkill_exit(); |
| return 0; |
| } |
| |
| static int acer_platform_suspend(struct platform_device *dev, |
| pm_message_t state) |
| { |
| u32 value; |
| struct acer_data *data = &interface->data; |
| |
| if (!data) |
| return -ENOMEM; |
| |
| if (has_cap(ACER_CAP_MAILLED)) { |
| get_u32(&value, ACER_CAP_MAILLED); |
| data->mailled = value; |
| } |
| |
| if (has_cap(ACER_CAP_BRIGHTNESS)) { |
| get_u32(&value, ACER_CAP_BRIGHTNESS); |
| data->brightness = value; |
| } |
| |
| return 0; |
| } |
| |
| static int acer_platform_resume(struct platform_device *device) |
| { |
| struct acer_data *data = &interface->data; |
| |
| if (!data) |
| return -ENOMEM; |
| |
| if (has_cap(ACER_CAP_MAILLED)) |
| set_u32(data->mailled, ACER_CAP_MAILLED); |
| |
| if (has_cap(ACER_CAP_BRIGHTNESS)) |
| set_u32(data->brightness, ACER_CAP_BRIGHTNESS); |
| |
| return 0; |
| } |
| |
| static struct platform_driver acer_platform_driver = { |
| .driver = { |
| .name = "acer-wmi", |
| .owner = THIS_MODULE, |
| }, |
| .probe = acer_platform_probe, |
| .remove = acer_platform_remove, |
| .suspend = acer_platform_suspend, |
| .resume = acer_platform_resume, |
| }; |
| |
| static struct platform_device *acer_platform_device; |
| |
| static int remove_sysfs(struct platform_device *device) |
| { |
| if (has_cap(ACER_CAP_THREEG)) |
| device_remove_file(&device->dev, &dev_attr_threeg); |
| |
| device_remove_file(&device->dev, &dev_attr_interface); |
| |
| return 0; |
| } |
| |
| static int create_sysfs(void) |
| { |
| int retval = -ENOMEM; |
| |
| if (has_cap(ACER_CAP_THREEG)) { |
| retval = device_create_file(&acer_platform_device->dev, |
| &dev_attr_threeg); |
| if (retval) |
| goto error_sysfs; |
| } |
| |
| retval = device_create_file(&acer_platform_device->dev, |
| &dev_attr_interface); |
| if (retval) |
| goto error_sysfs; |
| |
| return 0; |
| |
| error_sysfs: |
| remove_sysfs(acer_platform_device); |
| return retval; |
| } |
| |
| static void remove_debugfs(void) |
| { |
| debugfs_remove(interface->debug.devices); |
| debugfs_remove(interface->debug.root); |
| } |
| |
| static int create_debugfs(void) |
| { |
| interface->debug.root = debugfs_create_dir("acer-wmi", NULL); |
| if (!interface->debug.root) { |
| printk(ACER_ERR "Failed to create debugfs directory"); |
| return -ENOMEM; |
| } |
| |
| interface->debug.devices = debugfs_create_u32("devices", S_IRUGO, |
| interface->debug.root, |
| &interface->debug.wmid_devices); |
| if (!interface->debug.devices) |
| goto error_debugfs; |
| |
| return 0; |
| |
| error_debugfs: |
| remove_debugfs(); |
| return -ENOMEM; |
| } |
| |
| static int __init acer_wmi_init(void) |
| { |
| int err; |
| |
| printk(ACER_INFO "Acer Laptop ACPI-WMI Extras\n"); |
| |
| if (dmi_check_system(acer_blacklist)) { |
| printk(ACER_INFO "Blacklisted hardware detected - " |
| "not loading\n"); |
| return -ENODEV; |
| } |
| |
| find_quirks(); |
| |
| /* |
| * Detect which ACPI-WMI interface we're using. |
| */ |
| if (wmi_has_guid(AMW0_GUID1) && wmi_has_guid(WMID_GUID1)) |
| interface = &AMW0_V2_interface; |
| |
| if (!wmi_has_guid(AMW0_GUID1) && wmi_has_guid(WMID_GUID1)) |
| interface = &wmid_interface; |
| |
| if (wmi_has_guid(WMID_GUID2) && interface) { |
| if (ACPI_FAILURE(WMID_set_capabilities())) { |
| printk(ACER_ERR "Unable to detect available WMID " |
| "devices\n"); |
| return -ENODEV; |
| } |
| } else if (!wmi_has_guid(WMID_GUID2) && interface) { |
| printk(ACER_ERR "No WMID device detection method found\n"); |
| return -ENODEV; |
| } |
| |
| if (wmi_has_guid(AMW0_GUID1) && !wmi_has_guid(WMID_GUID1)) { |
| interface = &AMW0_interface; |
| |
| if (ACPI_FAILURE(AMW0_set_capabilities())) { |
| printk(ACER_ERR "Unable to detect available AMW0 " |
| "devices\n"); |
| return -ENODEV; |
| } |
| } |
| |
| if (wmi_has_guid(AMW0_GUID1)) |
| AMW0_find_mailled(); |
| |
| if (!interface) { |
| printk(ACER_INFO "No or unsupported WMI interface, unable to " |
| "load\n"); |
| return -ENODEV; |
| } |
| |
| set_quirks(); |
| |
| if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { |
| interface->capability &= ~ACER_CAP_BRIGHTNESS; |
| printk(ACER_INFO "Brightness must be controlled by " |
| "generic video driver\n"); |
| } |
| |
| if (wmi_has_guid(WMID_GUID3)) { |
| if (ec_raw_mode) { |
| if (ACPI_FAILURE(acer_wmi_enable_ec_raw())) { |
| printk(ACER_ERR "Cannot enable EC raw mode\n"); |
| return -ENODEV; |
| } |
| } else if (ACPI_FAILURE(acer_wmi_enable_lm())) { |
| printk(ACER_ERR "Cannot enable Launch Manager mode\n"); |
| return -ENODEV; |
| } |
| } else if (ec_raw_mode) { |
| printk(ACER_INFO "No WMID EC raw mode enable method\n"); |
| } |
| |
| if (wmi_has_guid(ACERWMID_EVENT_GUID)) { |
| err = acer_wmi_input_setup(); |
| if (err) |
| return err; |
| } |
| |
| err = platform_driver_register(&acer_platform_driver); |
| if (err) { |
| printk(ACER_ERR "Unable to register platform driver.\n"); |
| goto error_platform_register; |
| } |
| |
| acer_platform_device = platform_device_alloc("acer-wmi", -1); |
| if (!acer_platform_device) { |
| err = -ENOMEM; |
| goto error_device_alloc; |
| } |
| |
| err = platform_device_add(acer_platform_device); |
| if (err) |
| goto error_device_add; |
| |
| err = create_sysfs(); |
| if (err) |
| goto error_create_sys; |
| |
| if (wmi_has_guid(WMID_GUID2)) { |
| interface->debug.wmid_devices = get_wmid_devices(); |
| err = create_debugfs(); |
| if (err) |
| goto error_create_debugfs; |
| } |
| |
| /* Override any initial settings with values from the commandline */ |
| acer_commandline_init(); |
| |
| return 0; |
| |
| error_create_debugfs: |
| remove_sysfs(acer_platform_device); |
| error_create_sys: |
| platform_device_del(acer_platform_device); |
| error_device_add: |
| platform_device_put(acer_platform_device); |
| error_device_alloc: |
| platform_driver_unregister(&acer_platform_driver); |
| error_platform_register: |
| if (wmi_has_guid(ACERWMID_EVENT_GUID)) |
| acer_wmi_input_destroy(); |
| |
| return err; |
| } |
| |
| static void __exit acer_wmi_exit(void) |
| { |
| if (wmi_has_guid(ACERWMID_EVENT_GUID)) |
| acer_wmi_input_destroy(); |
| |
| remove_sysfs(acer_platform_device); |
| remove_debugfs(); |
| platform_device_unregister(acer_platform_device); |
| platform_driver_unregister(&acer_platform_driver); |
| |
| printk(ACER_INFO "Acer Laptop WMI Extras unloaded\n"); |
| return; |
| } |
| |
| module_init(acer_wmi_init); |
| module_exit(acer_wmi_exit); |