NetXen: Added ethtool support for user level tools.
NetXen: Added ethtool support for user level firmware management utilities.
Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index c381d77..cc0efe2 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -32,6 +32,7 @@
*/
#include <linux/types.h>
+#include <linux/delay.h>
#include <asm/uaccess.h>
#include <linux/pci.h>
#include <asm/io.h>
@@ -94,17 +95,7 @@
static int netxen_nic_get_eeprom_len(struct net_device *dev)
{
- struct netxen_port *port = netdev_priv(dev);
- struct netxen_adapter *adapter = port->adapter;
- int n;
-
- if ((netxen_rom_fast_read(adapter, 0, &n) == 0)
- && (n & NETXEN_ROM_ROUNDUP)) {
- n &= ~NETXEN_ROM_ROUNDUP;
- if (n < NETXEN_MAX_EEPROM_LEN)
- return n;
- }
- return 0;
+ return FLASH_TOTAL_SIZE;
}
static void
@@ -440,18 +431,92 @@
struct netxen_port *port = netdev_priv(dev);
struct netxen_adapter *adapter = port->adapter;
int offset;
+ int ret;
if (eeprom->len == 0)
return -EINVAL;
eeprom->magic = (port->pdev)->vendor | ((port->pdev)->device << 16);
- for (offset = 0; offset < eeprom->len; offset++)
- if (netxen_rom_fast_read
- (adapter, (8 * offset) + 8, (int *)eeprom->data) == -1)
- return -EIO;
+ offset = eeprom->offset;
+
+ ret = netxen_rom_fast_read_words(adapter, offset, bytes,
+ eeprom->len);
+ if (ret < 0)
+ return ret;
+
return 0;
}
+static int
+netxen_nic_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 * bytes)
+{
+ struct netxen_port *port = netdev_priv(dev);
+ struct netxen_adapter *adapter = port->adapter;
+ int offset = eeprom->offset;
+ static int flash_start;
+ static int ready_to_flash;
+ int ret;
+
+ if (flash_start == 0) {
+ ret = netxen_flash_unlock(adapter);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: Flash unlock failed.\n",
+ netxen_nic_driver_name);
+ return ret;
+ }
+ printk(KERN_INFO "%s: flash unlocked. \n",
+ netxen_nic_driver_name);
+ ret = netxen_flash_erase_secondary(adapter);
+ if (ret != FLASH_SUCCESS) {
+ printk(KERN_ERR "%s: Flash erase failed.\n",
+ netxen_nic_driver_name);
+ return ret;
+ }
+ printk(KERN_INFO "%s: secondary flash erased successfully.\n",
+ netxen_nic_driver_name);
+ flash_start = 1;
+ return 0;
+ }
+
+ if (offset == BOOTLD_START) {
+ ret = netxen_flash_erase_primary(adapter);
+ if (ret != FLASH_SUCCESS) {
+ printk(KERN_ERR "%s: Flash erase failed.\n",
+ netxen_nic_driver_name);
+ return ret;
+ }
+
+ ret = netxen_rom_se(adapter, USER_START);
+ if (ret != FLASH_SUCCESS)
+ return ret;
+ ret = netxen_rom_se(adapter, FIXED_START);
+ if (ret != FLASH_SUCCESS)
+ return ret;
+
+ printk(KERN_INFO "%s: primary flash erased successfully\n",
+ netxen_nic_driver_name);
+
+ ret = netxen_backup_crbinit(adapter);
+ if (ret != FLASH_SUCCESS) {
+ printk(KERN_ERR "%s: CRBinit backup failed.\n",
+ netxen_nic_driver_name);
+ return ret;
+ }
+ printk(KERN_INFO "%s: CRBinit backup done.\n",
+ netxen_nic_driver_name);
+ ready_to_flash = 1;
+ }
+
+ if (!ready_to_flash) {
+ printk(KERN_ERR "%s: Invalid write sequence, returning...\n",
+ netxen_nic_driver_name);
+ return -EINVAL;
+ }
+
+ return netxen_rom_fast_write_words(adapter, offset, bytes, eeprom->len);
+}
+
static void
netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
{
@@ -721,6 +786,7 @@
.get_link = netxen_nic_get_link,
.get_eeprom_len = netxen_nic_get_eeprom_len,
.get_eeprom = netxen_nic_get_eeprom,
+ .set_eeprom = netxen_nic_set_eeprom,
.get_ringparam = netxen_nic_get_ringparam,
.get_pauseparam = netxen_nic_get_pauseparam,
.set_pauseparam = netxen_nic_set_pauseparam,