| /* |
| * drivers/usb/usb.c |
| * |
| * (C) Copyright Linus Torvalds 1999 |
| * (C) Copyright Johannes Erdfelt 1999-2001 |
| * (C) Copyright Andreas Gal 1999 |
| * (C) Copyright Gregory P. Smith 1999 |
| * (C) Copyright Deti Fliegl 1999 (new USB architecture) |
| * (C) Copyright Randy Dunlap 2000 |
| * (C) Copyright David Brownell 2000-2004 |
| * (C) Copyright Yggdrasil Computing, Inc. 2000 |
| * (usb_device_id matching changes by Adam J. Richter) |
| * (C) Copyright Greg Kroah-Hartman 2002-2003 |
| * |
| * NOTE! This is not actually a driver at all, rather this is |
| * just a collection of helper routines that implement the |
| * generic USB things that the real drivers can use.. |
| * |
| * Think of this as a "USB library" rather than anything else. |
| * It should be considered a slave, with no callbacks. Callbacks |
| * are evil. |
| */ |
| |
| #include <linux/config.h> |
| |
| #ifdef CONFIG_USB_DEBUG |
| #define DEBUG |
| #else |
| #undef DEBUG |
| #endif |
| |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> /* for in_interrupt() */ |
| #include <linux/kmod.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/errno.h> |
| #include <linux/smp_lock.h> |
| #include <linux/rwsem.h> |
| #include <linux/usb.h> |
| |
| #include <asm/io.h> |
| #include <asm/scatterlist.h> |
| #include <linux/mm.h> |
| #include <linux/dma-mapping.h> |
| |
| #include "hcd.h" |
| #include "usb.h" |
| |
| extern int usb_hub_init(void); |
| extern void usb_hub_cleanup(void); |
| extern int usb_major_init(void); |
| extern void usb_major_cleanup(void); |
| extern int usb_host_init(void); |
| extern void usb_host_cleanup(void); |
| |
| |
| const char *usbcore_name = "usbcore"; |
| |
| static int nousb; /* Disable USB when built into kernel image */ |
| /* Not honored on modular build */ |
| |
| static DECLARE_RWSEM(usb_all_devices_rwsem); |
| |
| |
| static int generic_probe (struct device *dev) |
| { |
| return 0; |
| } |
| static int generic_remove (struct device *dev) |
| { |
| return 0; |
| } |
| |
| static struct device_driver usb_generic_driver = { |
| .owner = THIS_MODULE, |
| .name = "usb", |
| .bus = &usb_bus_type, |
| .probe = generic_probe, |
| .remove = generic_remove, |
| }; |
| |
| static int usb_generic_driver_data; |
| |
| /* called from driver core with usb_bus_type.subsys writelock */ |
| static int usb_probe_interface(struct device *dev) |
| { |
| struct usb_interface * intf = to_usb_interface(dev); |
| struct usb_driver * driver = to_usb_driver(dev->driver); |
| const struct usb_device_id *id; |
| int error = -ENODEV; |
| |
| dev_dbg(dev, "%s\n", __FUNCTION__); |
| |
| if (!driver->probe) |
| return error; |
| /* FIXME we'd much prefer to just resume it ... */ |
| if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED) |
| return -EHOSTUNREACH; |
| |
| id = usb_match_id (intf, driver->id_table); |
| if (id) { |
| dev_dbg (dev, "%s - got id\n", __FUNCTION__); |
| intf->condition = USB_INTERFACE_BINDING; |
| error = driver->probe (intf, id); |
| intf->condition = error ? USB_INTERFACE_UNBOUND : |
| USB_INTERFACE_BOUND; |
| } |
| |
| return error; |
| } |
| |
| /* called from driver core with usb_bus_type.subsys writelock */ |
| static int usb_unbind_interface(struct device *dev) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_driver *driver = to_usb_driver(intf->dev.driver); |
| |
| intf->condition = USB_INTERFACE_UNBINDING; |
| |
| /* release all urbs for this interface */ |
| usb_disable_interface(interface_to_usbdev(intf), intf); |
| |
| if (driver && driver->disconnect) |
| driver->disconnect(intf); |
| |
| /* reset other interface state */ |
| usb_set_interface(interface_to_usbdev(intf), |
| intf->altsetting[0].desc.bInterfaceNumber, |
| 0); |
| usb_set_intfdata(intf, NULL); |
| intf->condition = USB_INTERFACE_UNBOUND; |
| |
| return 0; |
| } |
| |
| /** |
| * usb_register - register a USB driver |
| * @new_driver: USB operations for the driver |
| * |
| * Registers a USB driver with the USB core. The list of unattached |
| * interfaces will be rescanned whenever a new driver is added, allowing |
| * the new driver to attach to any recognized devices. |
| * Returns a negative error code on failure and 0 on success. |
| * |
| * NOTE: if you want your driver to use the USB major number, you must call |
| * usb_register_dev() to enable that functionality. This function no longer |
| * takes care of that. |
| */ |
| int usb_register(struct usb_driver *new_driver) |
| { |
| int retval = 0; |
| |
| if (nousb) |
| return -ENODEV; |
| |
| new_driver->driver.name = (char *)new_driver->name; |
| new_driver->driver.bus = &usb_bus_type; |
| new_driver->driver.probe = usb_probe_interface; |
| new_driver->driver.remove = usb_unbind_interface; |
| new_driver->driver.owner = new_driver->owner; |
| |
| usb_lock_all_devices(); |
| retval = driver_register(&new_driver->driver); |
| usb_unlock_all_devices(); |
| |
| if (!retval) { |
| pr_info("%s: registered new driver %s\n", |
| usbcore_name, new_driver->name); |
| usbfs_update_special(); |
| } else { |
| printk(KERN_ERR "%s: error %d registering driver %s\n", |
| usbcore_name, retval, new_driver->name); |
| } |
| |
| return retval; |
| } |
| |
| /** |
| * usb_deregister - unregister a USB driver |
| * @driver: USB operations of the driver to unregister |
| * Context: must be able to sleep |
| * |
| * Unlinks the specified driver from the internal USB driver list. |
| * |
| * NOTE: If you called usb_register_dev(), you still need to call |
| * usb_deregister_dev() to clean up your driver's allocated minor numbers, |
| * this * call will no longer do it for you. |
| */ |
| void usb_deregister(struct usb_driver *driver) |
| { |
| pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); |
| |
| usb_lock_all_devices(); |
| driver_unregister (&driver->driver); |
| usb_unlock_all_devices(); |
| |
| usbfs_update_special(); |
| } |
| |
| /** |
| * usb_ifnum_to_if - get the interface object with a given interface number |
| * @dev: the device whose current configuration is considered |
| * @ifnum: the desired interface |
| * |
| * This walks the device descriptor for the currently active configuration |
| * and returns a pointer to the interface with that particular interface |
| * number, or null. |
| * |
| * Note that configuration descriptors are not required to assign interface |
| * numbers sequentially, so that it would be incorrect to assume that |
| * the first interface in that descriptor corresponds to interface zero. |
| * This routine helps device drivers avoid such mistakes. |
| * However, you should make sure that you do the right thing with any |
| * alternate settings available for this interfaces. |
| * |
| * Don't call this function unless you are bound to one of the interfaces |
| * on this device or you have locked the device! |
| */ |
| struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, unsigned ifnum) |
| { |
| struct usb_host_config *config = dev->actconfig; |
| int i; |
| |
| if (!config) |
| return NULL; |
| for (i = 0; i < config->desc.bNumInterfaces; i++) |
| if (config->interface[i]->altsetting[0] |
| .desc.bInterfaceNumber == ifnum) |
| return config->interface[i]; |
| |
| return NULL; |
| } |
| |
| /** |
| * usb_altnum_to_altsetting - get the altsetting structure with a given |
| * alternate setting number. |
| * @intf: the interface containing the altsetting in question |
| * @altnum: the desired alternate setting number |
| * |
| * This searches the altsetting array of the specified interface for |
| * an entry with the correct bAlternateSetting value and returns a pointer |
| * to that entry, or null. |
| * |
| * Note that altsettings need not be stored sequentially by number, so |
| * it would be incorrect to assume that the first altsetting entry in |
| * the array corresponds to altsetting zero. This routine helps device |
| * drivers avoid such mistakes. |
| * |
| * Don't call this function unless you are bound to the intf interface |
| * or you have locked the device! |
| */ |
| struct usb_host_interface *usb_altnum_to_altsetting(struct usb_interface *intf, |
| unsigned int altnum) |
| { |
| int i; |
| |
| for (i = 0; i < intf->num_altsetting; i++) { |
| if (intf->altsetting[i].desc.bAlternateSetting == altnum) |
| return &intf->altsetting[i]; |
| } |
| return NULL; |
| } |
| |
| /** |
| * usb_driver_claim_interface - bind a driver to an interface |
| * @driver: the driver to be bound |
| * @iface: the interface to which it will be bound; must be in the |
| * usb device's active configuration |
| * @priv: driver data associated with that interface |
| * |
| * This is used by usb device drivers that need to claim more than one |
| * interface on a device when probing (audio and acm are current examples). |
| * No device driver should directly modify internal usb_interface or |
| * usb_device structure members. |
| * |
| * Few drivers should need to use this routine, since the most natural |
| * way to bind to an interface is to return the private data from |
| * the driver's probe() method. |
| * |
| * Callers must own the device lock and the driver model's usb_bus_type.subsys |
| * writelock. So driver probe() entries don't need extra locking, |
| * but other call contexts may need to explicitly claim those locks. |
| */ |
| int usb_driver_claim_interface(struct usb_driver *driver, |
| struct usb_interface *iface, void* priv) |
| { |
| struct device *dev = &iface->dev; |
| |
| if (dev->driver) |
| return -EBUSY; |
| |
| dev->driver = &driver->driver; |
| usb_set_intfdata(iface, priv); |
| iface->condition = USB_INTERFACE_BOUND; |
| |
| /* if interface was already added, bind now; else let |
| * the future device_add() bind it, bypassing probe() |
| */ |
| if (!list_empty (&dev->bus_list)) |
| device_bind_driver(dev); |
| |
| return 0; |
| } |
| |
| /** |
| * usb_driver_release_interface - unbind a driver from an interface |
| * @driver: the driver to be unbound |
| * @iface: the interface from which it will be unbound |
| * |
| * This can be used by drivers to release an interface without waiting |
| * for their disconnect() methods to be called. In typical cases this |
| * also causes the driver disconnect() method to be called. |
| * |
| * This call is synchronous, and may not be used in an interrupt context. |
| * Callers must own the device lock and the driver model's usb_bus_type.subsys |
| * writelock. So driver disconnect() entries don't need extra locking, |
| * but other call contexts may need to explicitly claim those locks. |
| */ |
| void usb_driver_release_interface(struct usb_driver *driver, |
| struct usb_interface *iface) |
| { |
| struct device *dev = &iface->dev; |
| |
| /* this should never happen, don't release something that's not ours */ |
| if (!dev->driver || dev->driver != &driver->driver) |
| return; |
| |
| /* don't disconnect from disconnect(), or before dev_add() */ |
| if (!list_empty (&dev->driver_list) && !list_empty (&dev->bus_list)) |
| device_release_driver(dev); |
| |
| dev->driver = NULL; |
| usb_set_intfdata(iface, NULL); |
| iface->condition = USB_INTERFACE_UNBOUND; |
| } |
| |
| /** |
| * usb_match_id - find first usb_device_id matching device or interface |
| * @interface: the interface of interest |
| * @id: array of usb_device_id structures, terminated by zero entry |
| * |
| * usb_match_id searches an array of usb_device_id's and returns |
| * the first one matching the device or interface, or null. |
| * This is used when binding (or rebinding) a driver to an interface. |
| * Most USB device drivers will use this indirectly, through the usb core, |
| * but some layered driver frameworks use it directly. |
| * These device tables are exported with MODULE_DEVICE_TABLE, through |
| * modutils and "modules.usbmap", to support the driver loading |
| * functionality of USB hotplugging. |
| * |
| * What Matches: |
| * |
| * The "match_flags" element in a usb_device_id controls which |
| * members are used. If the corresponding bit is set, the |
| * value in the device_id must match its corresponding member |
| * in the device or interface descriptor, or else the device_id |
| * does not match. |
| * |
| * "driver_info" is normally used only by device drivers, |
| * but you can create a wildcard "matches anything" usb_device_id |
| * as a driver's "modules.usbmap" entry if you provide an id with |
| * only a nonzero "driver_info" field. If you do this, the USB device |
| * driver's probe() routine should use additional intelligence to |
| * decide whether to bind to the specified interface. |
| * |
| * What Makes Good usb_device_id Tables: |
| * |
| * The match algorithm is very simple, so that intelligence in |
| * driver selection must come from smart driver id records. |
| * Unless you have good reasons to use another selection policy, |
| * provide match elements only in related groups, and order match |
| * specifiers from specific to general. Use the macros provided |
| * for that purpose if you can. |
| * |
| * The most specific match specifiers use device descriptor |
| * data. These are commonly used with product-specific matches; |
| * the USB_DEVICE macro lets you provide vendor and product IDs, |
| * and you can also match against ranges of product revisions. |
| * These are widely used for devices with application or vendor |
| * specific bDeviceClass values. |
| * |
| * Matches based on device class/subclass/protocol specifications |
| * are slightly more general; use the USB_DEVICE_INFO macro, or |
| * its siblings. These are used with single-function devices |
| * where bDeviceClass doesn't specify that each interface has |
| * its own class. |
| * |
| * Matches based on interface class/subclass/protocol are the |
| * most general; they let drivers bind to any interface on a |
| * multiple-function device. Use the USB_INTERFACE_INFO |
| * macro, or its siblings, to match class-per-interface style |
| * devices (as recorded in bDeviceClass). |
| * |
| * Within those groups, remember that not all combinations are |
| * meaningful. For example, don't give a product version range |
| * without vendor and product IDs; or specify a protocol without |
| * its associated class and subclass. |
| */ |
| const struct usb_device_id * |
| usb_match_id(struct usb_interface *interface, const struct usb_device_id *id) |
| { |
| struct usb_host_interface *intf; |
| struct usb_device *dev; |
| |
| /* proc_connectinfo in devio.c may call us with id == NULL. */ |
| if (id == NULL) |
| return NULL; |
| |
| intf = interface->cur_altsetting; |
| dev = interface_to_usbdev(interface); |
| |
| /* It is important to check that id->driver_info is nonzero, |
| since an entry that is all zeroes except for a nonzero |
| id->driver_info is the way to create an entry that |
| indicates that the driver want to examine every |
| device and interface. */ |
| for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || |
| id->driver_info; id++) { |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && |
| id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) |
| continue; |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && |
| id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) |
| continue; |
| |
| /* No need to test id->bcdDevice_lo != 0, since 0 is never |
| greater than any unsigned number. */ |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && |
| (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) |
| continue; |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && |
| (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) |
| continue; |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && |
| (id->bDeviceClass != dev->descriptor.bDeviceClass)) |
| continue; |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && |
| (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) |
| continue; |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && |
| (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) |
| continue; |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && |
| (id->bInterfaceClass != intf->desc.bInterfaceClass)) |
| continue; |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && |
| (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) |
| continue; |
| |
| if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && |
| (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) |
| continue; |
| |
| return id; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * usb_find_interface - find usb_interface pointer for driver and device |
| * @drv: the driver whose current configuration is considered |
| * @minor: the minor number of the desired device |
| * |
| * This walks the driver device list and returns a pointer to the interface |
| * with the matching minor. Note, this only works for devices that share the |
| * USB major number. |
| */ |
| struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor) |
| { |
| struct list_head *entry; |
| struct device *dev; |
| struct usb_interface *intf; |
| |
| list_for_each(entry, &drv->driver.devices) { |
| dev = container_of(entry, struct device, driver_list); |
| |
| /* can't look at usb devices, only interfaces */ |
| if (dev->driver == &usb_generic_driver) |
| continue; |
| |
| intf = to_usb_interface(dev); |
| if (intf->minor == -1) |
| continue; |
| if (intf->minor == minor) |
| return intf; |
| } |
| |
| /* no device found that matches */ |
| return NULL; |
| } |
| |
| static int usb_device_match (struct device *dev, struct device_driver *drv) |
| { |
| struct usb_interface *intf; |
| struct usb_driver *usb_drv; |
| const struct usb_device_id *id; |
| |
| /* check for generic driver, which we don't match any device with */ |
| if (drv == &usb_generic_driver) |
| return 0; |
| |
| intf = to_usb_interface(dev); |
| usb_drv = to_usb_driver(drv); |
| |
| id = usb_match_id (intf, usb_drv->id_table); |
| if (id) |
| return 1; |
| |
| return 0; |
| } |
| |
| |
| #ifdef CONFIG_HOTPLUG |
| |
| /* |
| * USB hotplugging invokes what /proc/sys/kernel/hotplug says |
| * (normally /sbin/hotplug) when USB devices get added or removed. |
| * |
| * This invokes a user mode policy agent, typically helping to load driver |
| * or other modules, configure the device, and more. Drivers can provide |
| * a MODULE_DEVICE_TABLE to help with module loading subtasks. |
| * |
| * We're called either from khubd (the typical case) or from root hub |
| * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle |
| * delays in event delivery. Use sysfs (and DEVPATH) to make sure the |
| * device (and this configuration!) are still present. |
| */ |
| static int usb_hotplug (struct device *dev, char **envp, int num_envp, |
| char *buffer, int buffer_size) |
| { |
| struct usb_interface *intf; |
| struct usb_device *usb_dev; |
| int i = 0; |
| int length = 0; |
| |
| if (!dev) |
| return -ENODEV; |
| |
| /* driver is often null here; dev_dbg() would oops */ |
| pr_debug ("usb %s: hotplug\n", dev->bus_id); |
| |
| /* Must check driver_data here, as on remove driver is always NULL */ |
| if ((dev->driver == &usb_generic_driver) || |
| (dev->driver_data == &usb_generic_driver_data)) |
| return 0; |
| |
| intf = to_usb_interface(dev); |
| usb_dev = interface_to_usbdev (intf); |
| |
| if (usb_dev->devnum < 0) { |
| pr_debug ("usb %s: already deleted?\n", dev->bus_id); |
| return -ENODEV; |
| } |
| if (!usb_dev->bus) { |
| pr_debug ("usb %s: bus removed?\n", dev->bus_id); |
| return -ENODEV; |
| } |
| |
| #ifdef CONFIG_USB_DEVICEFS |
| /* If this is available, userspace programs can directly read |
| * all the device descriptors we don't tell them about. Or |
| * even act as usermode drivers. |
| * |
| * FIXME reduce hardwired intelligence here |
| */ |
| if (add_hotplug_env_var(envp, num_envp, &i, |
| buffer, buffer_size, &length, |
| "DEVICE=/proc/bus/usb/%03d/%03d", |
| usb_dev->bus->busnum, usb_dev->devnum)) |
| return -ENOMEM; |
| #endif |
| |
| /* per-device configurations are common */ |
| if (add_hotplug_env_var(envp, num_envp, &i, |
| buffer, buffer_size, &length, |
| "PRODUCT=%x/%x/%x", |
| le16_to_cpu(usb_dev->descriptor.idVendor), |
| le16_to_cpu(usb_dev->descriptor.idProduct), |
| le16_to_cpu(usb_dev->descriptor.bcdDevice))) |
| return -ENOMEM; |
| |
| /* class-based driver binding models */ |
| if (add_hotplug_env_var(envp, num_envp, &i, |
| buffer, buffer_size, &length, |
| "TYPE=%d/%d/%d", |
| usb_dev->descriptor.bDeviceClass, |
| usb_dev->descriptor.bDeviceSubClass, |
| usb_dev->descriptor.bDeviceProtocol)) |
| return -ENOMEM; |
| |
| if (usb_dev->descriptor.bDeviceClass == 0) { |
| struct usb_host_interface *alt = intf->cur_altsetting; |
| |
| /* 2.4 only exposed interface zero. in 2.5, hotplug |
| * agents are called for all interfaces, and can use |
| * $DEVPATH/bInterfaceNumber if necessary. |
| */ |
| if (add_hotplug_env_var(envp, num_envp, &i, |
| buffer, buffer_size, &length, |
| "INTERFACE=%d/%d/%d", |
| alt->desc.bInterfaceClass, |
| alt->desc.bInterfaceSubClass, |
| alt->desc.bInterfaceProtocol)) |
| return -ENOMEM; |
| |
| if (add_hotplug_env_var(envp, num_envp, &i, |
| buffer, buffer_size, &length, |
| "MODALIAS=usb:v%04Xp%04Xdl%04Xdh%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", |
| le16_to_cpu(usb_dev->descriptor.idVendor), |
| le16_to_cpu(usb_dev->descriptor.idProduct), |
| le16_to_cpu(usb_dev->descriptor.bcdDevice), |
| le16_to_cpu(usb_dev->descriptor.bcdDevice), |
| usb_dev->descriptor.bDeviceClass, |
| usb_dev->descriptor.bDeviceSubClass, |
| usb_dev->descriptor.bDeviceProtocol, |
| alt->desc.bInterfaceClass, |
| alt->desc.bInterfaceSubClass, |
| alt->desc.bInterfaceProtocol)) |
| return -ENOMEM; |
| } else { |
| if (add_hotplug_env_var(envp, num_envp, &i, |
| buffer, buffer_size, &length, |
| "MODALIAS=usb:v%04Xp%04Xdl%04Xdh%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*", |
| le16_to_cpu(usb_dev->descriptor.idVendor), |
| le16_to_cpu(usb_dev->descriptor.idProduct), |
| le16_to_cpu(usb_dev->descriptor.bcdDevice), |
| le16_to_cpu(usb_dev->descriptor.bcdDevice), |
| usb_dev->descriptor.bDeviceClass, |
| usb_dev->descriptor.bDeviceSubClass, |
| usb_dev->descriptor.bDeviceProtocol)) |
| return -ENOMEM; |
| } |
| |
| envp[i] = NULL; |
| |
| return 0; |
| } |
| |
| #else |
| |
| static int usb_hotplug (struct device *dev, char **envp, |
| int num_envp, char *buffer, int buffer_size) |
| { |
| return -ENODEV; |
| } |
| |
| #endif /* CONFIG_HOTPLUG */ |
| |
| /** |
| * usb_release_dev - free a usb device structure when all users of it are finished. |
| * @dev: device that's been disconnected |
| * |
| * Will be called only by the device core when all users of this usb device are |
| * done. |
| */ |
| static void usb_release_dev(struct device *dev) |
| { |
| struct usb_device *udev; |
| |
| udev = to_usb_device(dev); |
| |
| usb_destroy_configuration(udev); |
| usb_bus_put(udev->bus); |
| kfree(udev->product); |
| kfree(udev->manufacturer); |
| kfree(udev->serial); |
| kfree(udev); |
| } |
| |
| /** |
| * usb_alloc_dev - usb device constructor (usbcore-internal) |
| * @parent: hub to which device is connected; null to allocate a root hub |
| * @bus: bus used to access the device |
| * @port1: one-based index of port; ignored for root hubs |
| * Context: !in_interrupt () |
| * |
| * Only hub drivers (including virtual root hub drivers for host |
| * controllers) should ever call this. |
| * |
| * This call may not be used in a non-sleeping context. |
| */ |
| struct usb_device * |
| usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) |
| { |
| struct usb_device *dev; |
| |
| dev = kmalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return NULL; |
| |
| memset(dev, 0, sizeof(*dev)); |
| |
| bus = usb_bus_get(bus); |
| if (!bus) { |
| kfree(dev); |
| return NULL; |
| } |
| |
| device_initialize(&dev->dev); |
| dev->dev.bus = &usb_bus_type; |
| dev->dev.dma_mask = bus->controller->dma_mask; |
| dev->dev.driver_data = &usb_generic_driver_data; |
| dev->dev.driver = &usb_generic_driver; |
| dev->dev.release = usb_release_dev; |
| dev->state = USB_STATE_ATTACHED; |
| |
| INIT_LIST_HEAD(&dev->ep0.urb_list); |
| dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; |
| dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; |
| /* ep0 maxpacket comes later, from device descriptor */ |
| dev->ep_in[0] = dev->ep_out[0] = &dev->ep0; |
| |
| /* Save readable and stable topology id, distinguishing devices |
| * by location for diagnostics, tools, driver model, etc. The |
| * string is a path along hub ports, from the root. Each device's |
| * dev->devpath will be stable until USB is re-cabled, and hubs |
| * are often labeled with these port numbers. The bus_id isn't |
| * as stable: bus->busnum changes easily from modprobe order, |
| * cardbus or pci hotplugging, and so on. |
| */ |
| if (unlikely (!parent)) { |
| dev->devpath [0] = '0'; |
| |
| dev->dev.parent = bus->controller; |
| sprintf (&dev->dev.bus_id[0], "usb%d", bus->busnum); |
| } else { |
| /* match any labeling on the hubs; it's one-based */ |
| if (parent->devpath [0] == '0') |
| snprintf (dev->devpath, sizeof dev->devpath, |
| "%d", port1); |
| else |
| snprintf (dev->devpath, sizeof dev->devpath, |
| "%s.%d", parent->devpath, port1); |
| |
| dev->dev.parent = &parent->dev; |
| sprintf (&dev->dev.bus_id[0], "%d-%s", |
| bus->busnum, dev->devpath); |
| |
| /* hub driver sets up TT records */ |
| } |
| |
| dev->bus = bus; |
| dev->parent = parent; |
| INIT_LIST_HEAD(&dev->filelist); |
| |
| init_MUTEX(&dev->serialize); |
| |
| return dev; |
| } |
| |
| /** |
| * usb_get_dev - increments the reference count of the usb device structure |
| * @dev: the device being referenced |
| * |
| * Each live reference to a device should be refcounted. |
| * |
| * Drivers for USB interfaces should normally record such references in |
| * their probe() methods, when they bind to an interface, and release |
| * them by calling usb_put_dev(), in their disconnect() methods. |
| * |
| * A pointer to the device with the incremented reference counter is returned. |
| */ |
| struct usb_device *usb_get_dev(struct usb_device *dev) |
| { |
| if (dev) |
| get_device(&dev->dev); |
| return dev; |
| } |
| |
| /** |
| * usb_put_dev - release a use of the usb device structure |
| * @dev: device that's been disconnected |
| * |
| * Must be called when a user of a device is finished with it. When the last |
| * user of the device calls this function, the memory of the device is freed. |
| */ |
| void usb_put_dev(struct usb_device *dev) |
| { |
| if (dev) |
| put_device(&dev->dev); |
| } |
| |
| /** |
| * usb_get_intf - increments the reference count of the usb interface structure |
| * @intf: the interface being referenced |
| * |
| * Each live reference to a interface must be refcounted. |
| * |
| * Drivers for USB interfaces should normally record such references in |
| * their probe() methods, when they bind to an interface, and release |
| * them by calling usb_put_intf(), in their disconnect() methods. |
| * |
| * A pointer to the interface with the incremented reference counter is |
| * returned. |
| */ |
| struct usb_interface *usb_get_intf(struct usb_interface *intf) |
| { |
| if (intf) |
| get_device(&intf->dev); |
| return intf; |
| } |
| |
| /** |
| * usb_put_intf - release a use of the usb interface structure |
| * @intf: interface that's been decremented |
| * |
| * Must be called when a user of an interface is finished with it. When the |
| * last user of the interface calls this function, the memory of the interface |
| * is freed. |
| */ |
| void usb_put_intf(struct usb_interface *intf) |
| { |
| if (intf) |
| put_device(&intf->dev); |
| } |
| |
| |
| /* USB device locking |
| * |
| * Although locking USB devices should be straightforward, it is |
| * complicated by the way the driver-model core works. When a new USB |
| * driver is registered or unregistered, the core will automatically |
| * probe or disconnect all matching interfaces on all USB devices while |
| * holding the USB subsystem writelock. There's no good way for us to |
| * tell which devices will be used or to lock them beforehand; our only |
| * option is to effectively lock all the USB devices. |
| * |
| * We do that by using a private rw-semaphore, usb_all_devices_rwsem. |
| * When locking an individual device you must first acquire the rwsem's |
| * readlock. When a driver is registered or unregistered the writelock |
| * must be held. These actions are encapsulated in the subroutines |
| * below, so all a driver needs to do is call usb_lock_device() and |
| * usb_unlock_device(). |
| * |
| * Complications arise when several devices are to be locked at the same |
| * time. Only hub-aware drivers that are part of usbcore ever have to |
| * do this; nobody else needs to worry about it. The problem is that |
| * usb_lock_device() must not be called to lock a second device since it |
| * would acquire the rwsem's readlock reentrantly, leading to deadlock if |
| * another thread was waiting for the writelock. The solution is simple: |
| * |
| * When locking more than one device, call usb_lock_device() |
| * to lock the first one. Lock the others by calling |
| * down(&udev->serialize) directly. |
| * |
| * When unlocking multiple devices, use up(&udev->serialize) |
| * to unlock all but the last one. Unlock the last one by |
| * calling usb_unlock_device(). |
| * |
| * When locking both a device and its parent, always lock the |
| * the parent first. |
| */ |
| |
| /** |
| * usb_lock_device - acquire the lock for a usb device structure |
| * @udev: device that's being locked |
| * |
| * Use this routine when you don't hold any other device locks; |
| * to acquire nested inner locks call down(&udev->serialize) directly. |
| * This is necessary for proper interaction with usb_lock_all_devices(). |
| */ |
| void usb_lock_device(struct usb_device *udev) |
| { |
| down_read(&usb_all_devices_rwsem); |
| down(&udev->serialize); |
| } |
| |
| /** |
| * usb_trylock_device - attempt to acquire the lock for a usb device structure |
| * @udev: device that's being locked |
| * |
| * Don't use this routine if you already hold a device lock; |
| * use down_trylock(&udev->serialize) instead. |
| * This is necessary for proper interaction with usb_lock_all_devices(). |
| * |
| * Returns 1 if successful, 0 if contention. |
| */ |
| int usb_trylock_device(struct usb_device *udev) |
| { |
| if (!down_read_trylock(&usb_all_devices_rwsem)) |
| return 0; |
| if (down_trylock(&udev->serialize)) { |
| up_read(&usb_all_devices_rwsem); |
| return 0; |
| } |
| return 1; |
| } |
| |
| /** |
| * usb_lock_device_for_reset - cautiously acquire the lock for a |
| * usb device structure |
| * @udev: device that's being locked |
| * @iface: interface bound to the driver making the request (optional) |
| * |
| * Attempts to acquire the device lock, but fails if the device is |
| * NOTATTACHED or SUSPENDED, or if iface is specified and the interface |
| * is neither BINDING nor BOUND. Rather than sleeping to wait for the |
| * lock, the routine polls repeatedly. This is to prevent deadlock with |
| * disconnect; in some drivers (such as usb-storage) the disconnect() |
| * callback will block waiting for a device reset to complete. |
| * |
| * Returns a negative error code for failure, otherwise 1 or 0 to indicate |
| * that the device will or will not have to be unlocked. (0 can be |
| * returned when an interface is given and is BINDING, because in that |
| * case the driver already owns the device lock.) |
| */ |
| int usb_lock_device_for_reset(struct usb_device *udev, |
| struct usb_interface *iface) |
| { |
| if (udev->state == USB_STATE_NOTATTACHED) |
| return -ENODEV; |
| if (udev->state == USB_STATE_SUSPENDED) |
| return -EHOSTUNREACH; |
| if (iface) { |
| switch (iface->condition) { |
| case USB_INTERFACE_BINDING: |
| return 0; |
| case USB_INTERFACE_BOUND: |
| break; |
| default: |
| return -EINTR; |
| } |
| } |
| |
| while (!usb_trylock_device(udev)) { |
| msleep(15); |
| if (udev->state == USB_STATE_NOTATTACHED) |
| return -ENODEV; |
| if (udev->state == USB_STATE_SUSPENDED) |
| return -EHOSTUNREACH; |
| if (iface && iface->condition != USB_INTERFACE_BOUND) |
| return -EINTR; |
| } |
| return 1; |
| } |
| |
| /** |
| * usb_unlock_device - release the lock for a usb device structure |
| * @udev: device that's being unlocked |
| * |
| * Use this routine when releasing the only device lock you hold; |
| * to release inner nested locks call up(&udev->serialize) directly. |
| * This is necessary for proper interaction with usb_lock_all_devices(). |
| */ |
| void usb_unlock_device(struct usb_device *udev) |
| { |
| up(&udev->serialize); |
| up_read(&usb_all_devices_rwsem); |
| } |
| |
| /** |
| * usb_lock_all_devices - acquire the lock for all usb device structures |
| * |
| * This is necessary when registering a new driver or probing a bus, |
| * since the driver-model core may try to use any usb_device. |
| */ |
| void usb_lock_all_devices(void) |
| { |
| down_write(&usb_all_devices_rwsem); |
| } |
| |
| /** |
| * usb_unlock_all_devices - release the lock for all usb device structures |
| */ |
| void usb_unlock_all_devices(void) |
| { |
| up_write(&usb_all_devices_rwsem); |
| } |
| |
| |
| static struct usb_device *match_device(struct usb_device *dev, |
| u16 vendor_id, u16 product_id) |
| { |
| struct usb_device *ret_dev = NULL; |
| int child; |
| |
| dev_dbg(&dev->dev, "check for vendor %04x, product %04x ...\n", |
| le16_to_cpu(dev->descriptor.idVendor), |
| le16_to_cpu(dev->descriptor.idProduct)); |
| |
| /* see if this device matches */ |
| if ((vendor_id == le16_to_cpu(dev->descriptor.idVendor)) && |
| (product_id == le16_to_cpu(dev->descriptor.idProduct))) { |
| dev_dbg (&dev->dev, "matched this device!\n"); |
| ret_dev = usb_get_dev(dev); |
| goto exit; |
| } |
| |
| /* look through all of the children of this device */ |
| for (child = 0; child < dev->maxchild; ++child) { |
| if (dev->children[child]) { |
| down(&dev->children[child]->serialize); |
| ret_dev = match_device(dev->children[child], |
| vendor_id, product_id); |
| up(&dev->children[child]->serialize); |
| if (ret_dev) |
| goto exit; |
| } |
| } |
| exit: |
| return ret_dev; |
| } |
| |
| /** |
| * usb_find_device - find a specific usb device in the system |
| * @vendor_id: the vendor id of the device to find |
| * @product_id: the product id of the device to find |
| * |
| * Returns a pointer to a struct usb_device if such a specified usb |
| * device is present in the system currently. The usage count of the |
| * device will be incremented if a device is found. Make sure to call |
| * usb_put_dev() when the caller is finished with the device. |
| * |
| * If a device with the specified vendor and product id is not found, |
| * NULL is returned. |
| */ |
| struct usb_device *usb_find_device(u16 vendor_id, u16 product_id) |
| { |
| struct list_head *buslist; |
| struct usb_bus *bus; |
| struct usb_device *dev = NULL; |
| |
| down(&usb_bus_list_lock); |
| for (buslist = usb_bus_list.next; |
| buslist != &usb_bus_list; |
| buslist = buslist->next) { |
| bus = container_of(buslist, struct usb_bus, bus_list); |
| if (!bus->root_hub) |
| continue; |
| usb_lock_device(bus->root_hub); |
| dev = match_device(bus->root_hub, vendor_id, product_id); |
| usb_unlock_device(bus->root_hub); |
| if (dev) |
| goto exit; |
| } |
| exit: |
| up(&usb_bus_list_lock); |
| return dev; |
| } |
| |
| /** |
| * usb_get_current_frame_number - return current bus frame number |
| * @dev: the device whose bus is being queried |
| * |
| * Returns the current frame number for the USB host controller |
| * used with the given USB device. This can be used when scheduling |
| * isochronous requests. |
| * |
| * Note that different kinds of host controller have different |
| * "scheduling horizons". While one type might support scheduling only |
| * 32 frames into the future, others could support scheduling up to |
| * 1024 frames into the future. |
| */ |
| int usb_get_current_frame_number(struct usb_device *dev) |
| { |
| return dev->bus->op->get_frame_number (dev); |
| } |
| |
| /*-------------------------------------------------------------------*/ |
| /* |
| * __usb_get_extra_descriptor() finds a descriptor of specific type in the |
| * extra field of the interface and endpoint descriptor structs. |
| */ |
| |
| int __usb_get_extra_descriptor(char *buffer, unsigned size, |
| unsigned char type, void **ptr) |
| { |
| struct usb_descriptor_header *header; |
| |
| while (size >= sizeof(struct usb_descriptor_header)) { |
| header = (struct usb_descriptor_header *)buffer; |
| |
| if (header->bLength < 2) { |
| printk(KERN_ERR |
| "%s: bogus descriptor, type %d length %d\n", |
| usbcore_name, |
| header->bDescriptorType, |
| header->bLength); |
| return -1; |
| } |
| |
| if (header->bDescriptorType == type) { |
| *ptr = header; |
| return 0; |
| } |
| |
| buffer += header->bLength; |
| size -= header->bLength; |
| } |
| return -1; |
| } |
| |
| /** |
| * usb_buffer_alloc - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP |
| * @dev: device the buffer will be used with |
| * @size: requested buffer size |
| * @mem_flags: affect whether allocation may block |
| * @dma: used to return DMA address of buffer |
| * |
| * Return value is either null (indicating no buffer could be allocated), or |
| * the cpu-space pointer to a buffer that may be used to perform DMA to the |
| * specified device. Such cpu-space buffers are returned along with the DMA |
| * address (through the pointer provided). |
| * |
| * These buffers are used with URB_NO_xxx_DMA_MAP set in urb->transfer_flags |
| * to avoid behaviors like using "DMA bounce buffers", or tying down I/O |
| * mapping hardware for long idle periods. The implementation varies between |
| * platforms, depending on details of how DMA will work to this device. |
| * Using these buffers also helps prevent cacheline sharing problems on |
| * architectures where CPU caches are not DMA-coherent. |
| * |
| * When the buffer is no longer used, free it with usb_buffer_free(). |
| */ |
| void *usb_buffer_alloc ( |
| struct usb_device *dev, |
| size_t size, |
| int mem_flags, |
| dma_addr_t *dma |
| ) |
| { |
| if (!dev || !dev->bus || !dev->bus->op || !dev->bus->op->buffer_alloc) |
| return NULL; |
| return dev->bus->op->buffer_alloc (dev->bus, size, mem_flags, dma); |
| } |
| |
| /** |
| * usb_buffer_free - free memory allocated with usb_buffer_alloc() |
| * @dev: device the buffer was used with |
| * @size: requested buffer size |
| * @addr: CPU address of buffer |
| * @dma: DMA address of buffer |
| * |
| * This reclaims an I/O buffer, letting it be reused. The memory must have |
| * been allocated using usb_buffer_alloc(), and the parameters must match |
| * those provided in that allocation request. |
| */ |
| void usb_buffer_free ( |
| struct usb_device *dev, |
| size_t size, |
| void *addr, |
| dma_addr_t dma |
| ) |
| { |
| if (!dev || !dev->bus || !dev->bus->op || !dev->bus->op->buffer_free) |
| return; |
| dev->bus->op->buffer_free (dev->bus, size, addr, dma); |
| } |
| |
| /** |
| * usb_buffer_map - create DMA mapping(s) for an urb |
| * @urb: urb whose transfer_buffer/setup_packet will be mapped |
| * |
| * Return value is either null (indicating no buffer could be mapped), or |
| * the parameter. URB_NO_TRANSFER_DMA_MAP and URB_NO_SETUP_DMA_MAP are |
| * added to urb->transfer_flags if the operation succeeds. If the device |
| * is connected to this system through a non-DMA controller, this operation |
| * always succeeds. |
| * |
| * This call would normally be used for an urb which is reused, perhaps |
| * as the target of a large periodic transfer, with usb_buffer_dmasync() |
| * calls to synchronize memory and dma state. |
| * |
| * Reverse the effect of this call with usb_buffer_unmap(). |
| */ |
| #if 0 |
| struct urb *usb_buffer_map (struct urb *urb) |
| { |
| struct usb_bus *bus; |
| struct device *controller; |
| |
| if (!urb |
| || !urb->dev |
| || !(bus = urb->dev->bus) |
| || !(controller = bus->controller)) |
| return NULL; |
| |
| if (controller->dma_mask) { |
| urb->transfer_dma = dma_map_single (controller, |
| urb->transfer_buffer, urb->transfer_buffer_length, |
| usb_pipein (urb->pipe) |
| ? DMA_FROM_DEVICE : DMA_TO_DEVICE); |
| if (usb_pipecontrol (urb->pipe)) |
| urb->setup_dma = dma_map_single (controller, |
| urb->setup_packet, |
| sizeof (struct usb_ctrlrequest), |
| DMA_TO_DEVICE); |
| // FIXME generic api broken like pci, can't report errors |
| // if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; |
| } else |
| urb->transfer_dma = ~0; |
| urb->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP |
| | URB_NO_SETUP_DMA_MAP); |
| return urb; |
| } |
| #endif /* 0 */ |
| |
| /* XXX DISABLED, no users currently. If you wish to re-enable this |
| * XXX please determine whether the sync is to transfer ownership of |
| * XXX the buffer from device to cpu or vice verse, and thusly use the |
| * XXX appropriate _for_{cpu,device}() method. -DaveM |
| */ |
| #if 0 |
| |
| /** |
| * usb_buffer_dmasync - synchronize DMA and CPU view of buffer(s) |
| * @urb: urb whose transfer_buffer/setup_packet will be synchronized |
| */ |
| void usb_buffer_dmasync (struct urb *urb) |
| { |
| struct usb_bus *bus; |
| struct device *controller; |
| |
| if (!urb |
| || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) |
| || !urb->dev |
| || !(bus = urb->dev->bus) |
| || !(controller = bus->controller)) |
| return; |
| |
| if (controller->dma_mask) { |
| dma_sync_single (controller, |
| urb->transfer_dma, urb->transfer_buffer_length, |
| usb_pipein (urb->pipe) |
| ? DMA_FROM_DEVICE : DMA_TO_DEVICE); |
| if (usb_pipecontrol (urb->pipe)) |
| dma_sync_single (controller, |
| urb->setup_dma, |
| sizeof (struct usb_ctrlrequest), |
| DMA_TO_DEVICE); |
| } |
| } |
| #endif |
| |
| /** |
| * usb_buffer_unmap - free DMA mapping(s) for an urb |
| * @urb: urb whose transfer_buffer will be unmapped |
| * |
| * Reverses the effect of usb_buffer_map(). |
| */ |
| #if 0 |
| void usb_buffer_unmap (struct urb *urb) |
| { |
| struct usb_bus *bus; |
| struct device *controller; |
| |
| if (!urb |
| || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) |
| || !urb->dev |
| || !(bus = urb->dev->bus) |
| || !(controller = bus->controller)) |
| return; |
| |
| if (controller->dma_mask) { |
| dma_unmap_single (controller, |
| urb->transfer_dma, urb->transfer_buffer_length, |
| usb_pipein (urb->pipe) |
| ? DMA_FROM_DEVICE : DMA_TO_DEVICE); |
| if (usb_pipecontrol (urb->pipe)) |
| dma_unmap_single (controller, |
| urb->setup_dma, |
| sizeof (struct usb_ctrlrequest), |
| DMA_TO_DEVICE); |
| } |
| urb->transfer_flags &= ~(URB_NO_TRANSFER_DMA_MAP |
| | URB_NO_SETUP_DMA_MAP); |
| } |
| #endif /* 0 */ |
| |
| /** |
| * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint |
| * @dev: device to which the scatterlist will be mapped |
| * @pipe: endpoint defining the mapping direction |
| * @sg: the scatterlist to map |
| * @nents: the number of entries in the scatterlist |
| * |
| * Return value is either < 0 (indicating no buffers could be mapped), or |
| * the number of DMA mapping array entries in the scatterlist. |
| * |
| * The caller is responsible for placing the resulting DMA addresses from |
| * the scatterlist into URB transfer buffer pointers, and for setting the |
| * URB_NO_TRANSFER_DMA_MAP transfer flag in each of those URBs. |
| * |
| * Top I/O rates come from queuing URBs, instead of waiting for each one |
| * to complete before starting the next I/O. This is particularly easy |
| * to do with scatterlists. Just allocate and submit one URB for each DMA |
| * mapping entry returned, stopping on the first error or when all succeed. |
| * Better yet, use the usb_sg_*() calls, which do that (and more) for you. |
| * |
| * This call would normally be used when translating scatterlist requests, |
| * rather than usb_buffer_map(), since on some hardware (with IOMMUs) it |
| * may be able to coalesce mappings for improved I/O efficiency. |
| * |
| * Reverse the effect of this call with usb_buffer_unmap_sg(). |
| */ |
| int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe, |
| struct scatterlist *sg, int nents) |
| { |
| struct usb_bus *bus; |
| struct device *controller; |
| |
| if (!dev |
| || usb_pipecontrol (pipe) |
| || !(bus = dev->bus) |
| || !(controller = bus->controller) |
| || !controller->dma_mask) |
| return -1; |
| |
| // FIXME generic api broken like pci, can't report errors |
| return dma_map_sg (controller, sg, nents, |
| usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); |
| } |
| |
| /* XXX DISABLED, no users currently. If you wish to re-enable this |
| * XXX please determine whether the sync is to transfer ownership of |
| * XXX the buffer from device to cpu or vice verse, and thusly use the |
| * XXX appropriate _for_{cpu,device}() method. -DaveM |
| */ |
| #if 0 |
| |
| /** |
| * usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s) |
| * @dev: device to which the scatterlist will be mapped |
| * @pipe: endpoint defining the mapping direction |
| * @sg: the scatterlist to synchronize |
| * @n_hw_ents: the positive return value from usb_buffer_map_sg |
| * |
| * Use this when you are re-using a scatterlist's data buffers for |
| * another USB request. |
| */ |
| void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe, |
| struct scatterlist *sg, int n_hw_ents) |
| { |
| struct usb_bus *bus; |
| struct device *controller; |
| |
| if (!dev |
| || !(bus = dev->bus) |
| || !(controller = bus->controller) |
| || !controller->dma_mask) |
| return; |
| |
| dma_sync_sg (controller, sg, n_hw_ents, |
| usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); |
| } |
| #endif |
| |
| /** |
| * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist |
| * @dev: device to which the scatterlist will be mapped |
| * @pipe: endpoint defining the mapping direction |
| * @sg: the scatterlist to unmap |
| * @n_hw_ents: the positive return value from usb_buffer_map_sg |
| * |
| * Reverses the effect of usb_buffer_map_sg(). |
| */ |
| void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, |
| struct scatterlist *sg, int n_hw_ents) |
| { |
| struct usb_bus *bus; |
| struct device *controller; |
| |
| if (!dev |
| || !(bus = dev->bus) |
| || !(controller = bus->controller) |
| || !controller->dma_mask) |
| return; |
| |
| dma_unmap_sg (controller, sg, n_hw_ents, |
| usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); |
| } |
| |
| static int usb_generic_suspend(struct device *dev, pm_message_t message) |
| { |
| struct usb_interface *intf; |
| struct usb_driver *driver; |
| |
| if (dev->driver == &usb_generic_driver) |
| return usb_suspend_device (to_usb_device(dev), message); |
| |
| if ((dev->driver == NULL) || |
| (dev->driver_data == &usb_generic_driver_data)) |
| return 0; |
| |
| intf = to_usb_interface(dev); |
| driver = to_usb_driver(dev->driver); |
| |
| /* there's only one USB suspend state */ |
| if (intf->dev.power.power_state) |
| return 0; |
| |
| if (driver->suspend) |
| return driver->suspend(intf, message); |
| return 0; |
| } |
| |
| static int usb_generic_resume(struct device *dev) |
| { |
| struct usb_interface *intf; |
| struct usb_driver *driver; |
| |
| /* devices resume through their hub */ |
| if (dev->driver == &usb_generic_driver) |
| return usb_resume_device (to_usb_device(dev)); |
| |
| if ((dev->driver == NULL) || |
| (dev->driver_data == &usb_generic_driver_data)) |
| return 0; |
| |
| intf = to_usb_interface(dev); |
| driver = to_usb_driver(dev->driver); |
| |
| if (driver->resume) |
| return driver->resume(intf); |
| return 0; |
| } |
| |
| struct bus_type usb_bus_type = { |
| .name = "usb", |
| .match = usb_device_match, |
| .hotplug = usb_hotplug, |
| .suspend = usb_generic_suspend, |
| .resume = usb_generic_resume, |
| }; |
| |
| #ifndef MODULE |
| |
| static int __init usb_setup_disable(char *str) |
| { |
| nousb = 1; |
| return 1; |
| } |
| |
| /* format to disable USB on kernel command line is: nousb */ |
| __setup("nousb", usb_setup_disable); |
| |
| #endif |
| |
| /* |
| * for external read access to <nousb> |
| */ |
| int usb_disabled(void) |
| { |
| return nousb; |
| } |
| |
| /* |
| * Init |
| */ |
| static int __init usb_init(void) |
| { |
| int retval; |
| if (nousb) { |
| pr_info ("%s: USB support disabled\n", usbcore_name); |
| return 0; |
| } |
| |
| retval = bus_register(&usb_bus_type); |
| if (retval) |
| goto out; |
| retval = usb_host_init(); |
| if (retval) |
| goto host_init_failed; |
| retval = usb_major_init(); |
| if (retval) |
| goto major_init_failed; |
| retval = usbfs_init(); |
| if (retval) |
| goto fs_init_failed; |
| retval = usb_hub_init(); |
| if (retval) |
| goto hub_init_failed; |
| |
| retval = driver_register(&usb_generic_driver); |
| if (!retval) |
| goto out; |
| |
| usb_hub_cleanup(); |
| hub_init_failed: |
| usbfs_cleanup(); |
| fs_init_failed: |
| usb_major_cleanup(); |
| major_init_failed: |
| usb_host_cleanup(); |
| host_init_failed: |
| bus_unregister(&usb_bus_type); |
| out: |
| return retval; |
| } |
| |
| /* |
| * Cleanup |
| */ |
| static void __exit usb_exit(void) |
| { |
| /* This will matter if shutdown/reboot does exitcalls. */ |
| if (nousb) |
| return; |
| |
| driver_unregister(&usb_generic_driver); |
| usb_major_cleanup(); |
| usbfs_cleanup(); |
| usb_hub_cleanup(); |
| usb_host_cleanup(); |
| bus_unregister(&usb_bus_type); |
| } |
| |
| subsys_initcall(usb_init); |
| module_exit(usb_exit); |
| |
| /* |
| * USB may be built into the kernel or be built as modules. |
| * These symbols are exported for device (or host controller) |
| * driver modules to use. |
| */ |
| |
| EXPORT_SYMBOL(usb_register); |
| EXPORT_SYMBOL(usb_deregister); |
| EXPORT_SYMBOL(usb_disabled); |
| |
| EXPORT_SYMBOL(usb_alloc_dev); |
| EXPORT_SYMBOL(usb_put_dev); |
| EXPORT_SYMBOL(usb_get_dev); |
| EXPORT_SYMBOL(usb_hub_tt_clear_buffer); |
| |
| EXPORT_SYMBOL(usb_lock_device); |
| EXPORT_SYMBOL(usb_trylock_device); |
| EXPORT_SYMBOL(usb_lock_device_for_reset); |
| EXPORT_SYMBOL(usb_unlock_device); |
| |
| EXPORT_SYMBOL(usb_driver_claim_interface); |
| EXPORT_SYMBOL(usb_driver_release_interface); |
| EXPORT_SYMBOL(usb_match_id); |
| EXPORT_SYMBOL(usb_find_interface); |
| EXPORT_SYMBOL(usb_ifnum_to_if); |
| EXPORT_SYMBOL(usb_altnum_to_altsetting); |
| |
| EXPORT_SYMBOL(usb_reset_device); |
| EXPORT_SYMBOL(usb_disconnect); |
| |
| EXPORT_SYMBOL(__usb_get_extra_descriptor); |
| |
| EXPORT_SYMBOL(usb_find_device); |
| EXPORT_SYMBOL(usb_get_current_frame_number); |
| |
| EXPORT_SYMBOL (usb_buffer_alloc); |
| EXPORT_SYMBOL (usb_buffer_free); |
| |
| #if 0 |
| EXPORT_SYMBOL (usb_buffer_map); |
| EXPORT_SYMBOL (usb_buffer_dmasync); |
| EXPORT_SYMBOL (usb_buffer_unmap); |
| #endif |
| |
| EXPORT_SYMBOL (usb_buffer_map_sg); |
| #if 0 |
| EXPORT_SYMBOL (usb_buffer_dmasync_sg); |
| #endif |
| EXPORT_SYMBOL (usb_buffer_unmap_sg); |
| |
| MODULE_LICENSE("GPL"); |