net: Add ethtool to mii advertisment conversion helpers
Translating between ethtool advertisement settings and MII
advertisements are common operations for ethernet drivers. This patch
adds a set of helper functions that implements the conversion. The
patch then modifies a couple of the drivers to use the new functions.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index c62e781..d0a2962 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -41,20 +41,8 @@
advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
if (advert & LPA_LPACK)
result |= ADVERTISED_Autoneg;
- if (advert & ADVERTISE_10HALF)
- result |= ADVERTISED_10baseT_Half;
- if (advert & ADVERTISE_10FULL)
- result |= ADVERTISED_10baseT_Full;
- if (advert & ADVERTISE_100HALF)
- result |= ADVERTISED_100baseT_Half;
- if (advert & ADVERTISE_100FULL)
- result |= ADVERTISED_100baseT_Full;
- if (advert & ADVERTISE_PAUSE_CAP)
- result |= ADVERTISED_Pause;
- if (advert & ADVERTISE_PAUSE_ASYM)
- result |= ADVERTISED_Asym_Pause;
- return result;
+ return result | mii_adv_to_ethtool_100bt(advert);
}
/**
@@ -104,19 +92,13 @@
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);
- if (ctrl1000 & ADVERTISE_1000HALF)
- ecmd->advertising |= ADVERTISED_1000baseT_Half;
- if (ctrl1000 & ADVERTISE_1000FULL)
- ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ if (mii->supports_gmii)
+ ecmd->advertising |= mii_adv_to_ethtool_1000T(ctrl1000);
if (bmsr & BMSR_ANEGCOMPLETE) {
ecmd->lp_advertising = mii_get_an(mii, MII_LPA);
- if (stat1000 & LPA_1000HALF)
- ecmd->lp_advertising |=
- ADVERTISED_1000baseT_Half;
- if (stat1000 & LPA_1000FULL)
- ecmd->lp_advertising |=
- ADVERTISED_1000baseT_Full;
+ ecmd->lp_advertising |=
+ mii_lpa_to_ethtool_1000T(stat1000);
} else {
ecmd->lp_advertising = 0;
}
@@ -204,20 +186,10 @@
advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
tmp2 = advert2 & ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
}
- if (ecmd->advertising & ADVERTISED_10baseT_Half)
- tmp |= ADVERTISE_10HALF;
- if (ecmd->advertising & ADVERTISED_10baseT_Full)
- tmp |= ADVERTISE_10FULL;
- if (ecmd->advertising & ADVERTISED_100baseT_Half)
- tmp |= ADVERTISE_100HALF;
- if (ecmd->advertising & ADVERTISED_100baseT_Full)
- tmp |= ADVERTISE_100FULL;
- if (mii->supports_gmii) {
- if (ecmd->advertising & ADVERTISED_1000baseT_Half)
- tmp2 |= ADVERTISE_1000HALF;
- if (ecmd->advertising & ADVERTISED_1000baseT_Full)
- tmp2 |= ADVERTISE_1000FULL;
- }
+ tmp |= ethtool_adv_to_mii_100bt(ecmd->advertising);
+
+ if (mii->supports_gmii)
+ tmp2 |= ethtool_adv_to_mii_1000T(ecmd->advertising);
if (advert != tmp) {
mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
mii->advertising = tmp;