MIPS: ralink: adds support for RT305x SoC family
Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4896/
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
new file mode 100644
index 0000000..0a4bbdc
--- /dev/null
+++ b/arch/mips/ralink/rt305x.c
@@ -0,0 +1,242 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt305x.h>
+
+#include "common.h"
+
+enum rt305x_soc_type rt305x_soc;
+
+struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = RT305X_GPIO_MODE_I2C,
+ .gpio_first = RT305X_GPIO_I2C_SD,
+ .gpio_last = RT305X_GPIO_I2C_SCLK,
+ }, {
+ .name = "spi",
+ .mask = RT305X_GPIO_MODE_SPI,
+ .gpio_first = RT305X_GPIO_SPI_EN,
+ .gpio_last = RT305X_GPIO_SPI_CLK,
+ }, {
+ .name = "uartlite",
+ .mask = RT305X_GPIO_MODE_UART1,
+ .gpio_first = RT305X_GPIO_UART1_TXD,
+ .gpio_last = RT305X_GPIO_UART1_RXD,
+ }, {
+ .name = "jtag",
+ .mask = RT305X_GPIO_MODE_JTAG,
+ .gpio_first = RT305X_GPIO_JTAG_TDO,
+ .gpio_last = RT305X_GPIO_JTAG_TDI,
+ }, {
+ .name = "mdio",
+ .mask = RT305X_GPIO_MODE_MDIO,
+ .gpio_first = RT305X_GPIO_MDIO_MDC,
+ .gpio_last = RT305X_GPIO_MDIO_MDIO,
+ }, {
+ .name = "sdram",
+ .mask = RT305X_GPIO_MODE_SDRAM,
+ .gpio_first = RT305X_GPIO_SDRAM_MD16,
+ .gpio_last = RT305X_GPIO_SDRAM_MD31,
+ }, {
+ .name = "rgmii",
+ .mask = RT305X_GPIO_MODE_RGMII,
+ .gpio_first = RT305X_GPIO_GE0_TXD0,
+ .gpio_last = RT305X_GPIO_GE0_RXCLK,
+ }, {0}
+};
+
+struct ralink_pinmux_grp uart_mux[] = {
+ {
+ .name = "uartf",
+ .mask = RT305X_GPIO_MODE_UARTF,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "pcm uartf",
+ .mask = RT305X_GPIO_MODE_PCM_UARTF,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "pcm i2s",
+ .mask = RT305X_GPIO_MODE_PCM_I2S,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "i2s uartf",
+ .mask = RT305X_GPIO_MODE_I2S_UARTF,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "pcm gpio",
+ .mask = RT305X_GPIO_MODE_PCM_GPIO,
+ .gpio_first = RT305X_GPIO_10,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "gpio uartf",
+ .mask = RT305X_GPIO_MODE_GPIO_UARTF,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "gpio i2s",
+ .mask = RT305X_GPIO_MODE_GPIO_I2S,
+ .gpio_first = RT305X_GPIO_7,
+ .gpio_last = RT305X_GPIO_14,
+ }, {
+ .name = "gpio",
+ .mask = RT305X_GPIO_MODE_GPIO,
+ }, {0}
+};
+
+void rt305x_wdt_reset(void)
+{
+ u32 t;
+
+ /* enable WDT reset output on pin SRAM_CS_N */
+ t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+ t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT <<
+ RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT;
+ rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
+}
+
+struct ralink_pinmux gpio_pinmux = {
+ .mode = mode_mux,
+ .uart = uart_mux,
+ .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+ .wdt_reset = rt305x_wdt_reset,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
+ u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+
+ if (soc_is_rt305x() || soc_is_rt3350()) {
+ t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
+ RT305X_SYSCFG_CPUCLK_MASK;
+ switch (t) {
+ case RT305X_SYSCFG_CPUCLK_LOW:
+ cpu_rate = 320000000;
+ break;
+ case RT305X_SYSCFG_CPUCLK_HIGH:
+ cpu_rate = 384000000;
+ break;
+ }
+ sys_rate = uart_rate = wdt_rate = cpu_rate / 3;
+ } else if (soc_is_rt3352()) {
+ t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
+ RT3352_SYSCFG0_CPUCLK_MASK;
+ switch (t) {
+ case RT3352_SYSCFG0_CPUCLK_LOW:
+ cpu_rate = 384000000;
+ break;
+ case RT3352_SYSCFG0_CPUCLK_HIGH:
+ cpu_rate = 400000000;
+ break;
+ }
+ sys_rate = wdt_rate = cpu_rate / 3;
+ uart_rate = 40000000;
+ } else if (soc_is_rt5350()) {
+ t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
+ RT5350_SYSCFG0_CPUCLK_MASK;
+ switch (t) {
+ case RT5350_SYSCFG0_CPUCLK_360:
+ cpu_rate = 360000000;
+ sys_rate = cpu_rate / 3;
+ break;
+ case RT5350_SYSCFG0_CPUCLK_320:
+ cpu_rate = 320000000;
+ sys_rate = cpu_rate / 4;
+ break;
+ case RT5350_SYSCFG0_CPUCLK_300:
+ cpu_rate = 300000000;
+ sys_rate = cpu_rate / 3;
+ break;
+ default:
+ BUG();
+ }
+ uart_rate = 40000000;
+ wdt_rate = sys_rate;
+ } else {
+ BUG();
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000100.timer", wdt_rate);
+ ralink_clk_add("10000500.uart", uart_rate);
+ ralink_clk_add("10000c00.uartlite", uart_rate);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+ unsigned char *name;
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+ if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
+ unsigned long icache_sets;
+
+ icache_sets = (read_c0_config1() >> 22) & 7;
+ if (icache_sets == 1) {
+ rt305x_soc = RT305X_SOC_RT3050;
+ name = "RT3050";
+ soc_info->compatible = "ralink,rt3050-soc";
+ } else {
+ rt305x_soc = RT305X_SOC_RT3052;
+ name = "RT3052";
+ soc_info->compatible = "ralink,rt3052-soc";
+ }
+ } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
+ rt305x_soc = RT305X_SOC_RT3350;
+ name = "RT3350";
+ soc_info->compatible = "ralink,rt3350-soc";
+ } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
+ rt305x_soc = RT305X_SOC_RT3352;
+ name = "RT3352";
+ soc_info->compatible = "ralink,rt3352-soc";
+ } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
+ rt305x_soc = RT305X_SOC_RT5350;
+ name = "RT5350";
+ soc_info->compatible = "ralink,rt5350-soc";
+ } else {
+ panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+
+ id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s id:%u rev:%u",
+ name,
+ (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+ (id & CHIP_ID_REV_MASK));
+}