[ARM] e740 config use MFP
This patch updates e740 to use the new MFP GPIO setup code.
Signed-off-by: Ian Molton <spyro@f2s.com>
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 112f729..d270099 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -10,15 +10,57 @@
*
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
#include "generic.h"
+static unsigned long e740_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
/* Only e800 has 128MB RAM */
static void __init eseries_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
@@ -32,6 +74,11 @@
mi->bank[0].size = (64*1024*1024);
}
+static void __init e740_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+}
+
/* e-series machine definitions */
#ifdef CONFIG_MACH_E330
@@ -69,6 +116,7 @@
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
+ .init_machine = e740_init,
.timer = &pxa_timer,
MACHINE_END
#endif