ASoC: machine support for Toshiba e740 PDA
This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740.
Note:
The e740 has a hard headphone switch that turns the speaker off and is not
software detectable or controlable. Also both headphone and speaker amps
share a common output enable.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 6d48e00..a6fff78 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -135,6 +135,11 @@
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+ /* Audio power control */
+ GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
+ GPIO40_GPIO, /* Mic amp power */
+ GPIO41_GPIO, /* Headphone amp power */
+
/* PC Card */
GPIO8_GPIO, /* CD0 */
GPIO44_GPIO, /* CD1 */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 6d6e4d8..f3e5509 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -45,6 +45,11 @@
/* e7xx IrDA power control */
#define GPIO_E7XX_IR_OFF 38
+/* e740 audio control GPIOs */
+#define GPIO_E740_WM9705_nAVDD2 16
+#define GPIO_E740_MIC_ON 40
+#define GPIO_E740_AMP_ON 41
+
/* e750 audio control GPIOs */
#define GPIO_E750_HP_AMP_OFF 4
#define GPIO_E750_SPK_AMP_OFF 7
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index b9b1a3f..958ac3f 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -61,6 +61,15 @@
Say Y if you want to add support for SoC audio on Sharp
Zaurus SL-C6000x models (Tosa).
+config SND_PXA2XX_SOC_E740
+ tristate "SoC AC97 Audio support for e740"
+ depends on SND_PXA2XX_SOC && MACH_E740
+ select SND_SOC_WM9705
+ select SND_PXA2XX_SOC_AC97
+ help
+ Say Y if you want to add support for SoC audio on the
+ toshiba e740 PDA
+
config SND_PXA2XX_SOC_E750
tristate "SoC AC97 Audio support for e750"
depends on SND_PXA2XX_SOC && MACH_E750
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index c7d4cce..97a51a8 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -13,6 +13,7 @@
snd-soc-corgi-objs := corgi.o
snd-soc-poodle-objs := poodle.o
snd-soc-tosa-objs := tosa.o
+snd-soc-e740-objs := e740_wm9705.o
snd-soc-e750-objs := e750_wm9705.o
snd-soc-e800-objs := e800_wm9712.o
snd-soc-spitz-objs := spitz.o
@@ -23,6 +24,7 @@
obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o
+obj-$(CONFIG_SND_PXA2XX_SOC_E740) += snd-soc-e740.o
obj-$(CONFIG_SND_PXA2XX_SOC_E750) += snd-soc-e750.o
obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o
obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o
diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c
new file mode 100644
index 0000000..ac36176
--- /dev/null
+++ b/sound/soc/pxa/e740_wm9705.c
@@ -0,0 +1,213 @@
+/*
+ * e740-wm9705.c -- SoC audio for e740
+ *
+ * Copyright 2007 (c) Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 ONLY.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/gpio.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/eseries-gpio.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm9705.h"
+#include "pxa2xx-pcm.h"
+#include "pxa2xx-ac97.h"
+
+
+#define E740_AUDIO_OUT 1
+#define E740_AUDIO_IN 2
+
+static int e740_audio_power;
+
+static void e740_sync_audio_power(int status)
+{
+ gpio_set_value(GPIO_E740_WM9705_nAVDD2, !status);
+ gpio_set_value(GPIO_E740_AMP_ON, (status & E740_AUDIO_OUT) ? 1 : 0);
+ gpio_set_value(GPIO_E740_MIC_ON, (status & E740_AUDIO_IN) ? 1 : 0);
+}
+
+static int e740_mic_amp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ if (event & SND_SOC_DAPM_PRE_PMU)
+ e740_audio_power |= E740_AUDIO_IN;
+ else if (event & SND_SOC_DAPM_POST_PMD)
+ e740_audio_power &= ~E740_AUDIO_IN;
+
+ e740_sync_audio_power(e740_audio_power);
+
+ return 0;
+}
+
+static int e740_output_amp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ if (event & SND_SOC_DAPM_PRE_PMU)
+ e740_audio_power |= E740_AUDIO_OUT;
+ else if (event & SND_SOC_DAPM_POST_PMD)
+ e740_audio_power &= ~E740_AUDIO_OUT;
+
+ e740_sync_audio_power(e740_audio_power);
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget e740_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+ SND_SOC_DAPM_MIC("Mic (Internal)", NULL),
+ SND_SOC_DAPM_PGA_E("Output Amp", SND_SOC_NOPM, 0, 0, NULL, 0,
+ e740_output_amp_event, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_PGA_E("Mic Amp", SND_SOC_NOPM, 0, 0, NULL, 0,
+ e740_mic_amp_event, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ {"Output Amp", NULL, "LOUT"},
+ {"Output Amp", NULL, "ROUT"},
+ {"Output Amp", NULL, "MONOOUT"},
+
+ {"Speaker", NULL, "Output Amp"},
+ {"Headphone Jack", NULL, "Output Amp"},
+
+ {"MIC1", NULL, "Mic Amp"},
+ {"Mic Amp", NULL, "Mic (Internal)"},
+};
+
+static int e740_ac97_init(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_nc_pin(codec, "HPOUTL");
+ snd_soc_dapm_nc_pin(codec, "HPOUTR");
+ snd_soc_dapm_nc_pin(codec, "PHONE");
+ snd_soc_dapm_nc_pin(codec, "LINEINL");
+ snd_soc_dapm_nc_pin(codec, "LINEINR");
+ snd_soc_dapm_nc_pin(codec, "CDINL");
+ snd_soc_dapm_nc_pin(codec, "CDINR");
+ snd_soc_dapm_nc_pin(codec, "PCBEEP");
+ snd_soc_dapm_nc_pin(codec, "MIC2");
+
+ snd_soc_dapm_new_controls(codec, e740_dapm_widgets,
+ ARRAY_SIZE(e740_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link e740_dai[] = {
+ {
+ .name = "AC97",
+ .stream_name = "AC97 HiFi",
+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI],
+ .codec_dai = &wm9705_dai[WM9705_DAI_AC97_HIFI],
+ .init = e740_ac97_init,
+ },
+ {
+ .name = "AC97 Aux",
+ .stream_name = "AC97 Aux",
+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX],
+ .codec_dai = &wm9705_dai[WM9705_DAI_AC97_AUX],
+ },
+};
+
+static struct snd_soc_card e740 = {
+ .name = "Toshiba e740",
+ .platform = &pxa2xx_soc_platform,
+ .dai_link = e740_dai,
+ .num_links = ARRAY_SIZE(e740_dai),
+};
+
+static struct snd_soc_device e740_snd_devdata = {
+ .card = &e740,
+ .codec_dev = &soc_codec_dev_wm9705,
+};
+
+static struct platform_device *e740_snd_device;
+
+static int __init e740_init(void)
+{
+ int ret;
+
+ if (!machine_is_e740())
+ return -ENODEV;
+
+ ret = gpio_request(GPIO_E740_MIC_ON, "Mic amp");
+ if (ret)
+ return ret;
+
+ ret = gpio_request(GPIO_E740_AMP_ON, "Output amp");
+ if (ret)
+ goto free_mic_amp_gpio;
+
+ ret = gpio_request(GPIO_E740_WM9705_nAVDD2, "Audio power");
+ if (ret)
+ goto free_op_amp_gpio;
+
+ /* Disable audio */
+ ret = gpio_direction_output(GPIO_E740_MIC_ON, 0);
+ if (ret)
+ goto free_apwr_gpio;
+ ret = gpio_direction_output(GPIO_E740_AMP_ON, 0);
+ if (ret)
+ goto free_apwr_gpio;
+ ret = gpio_direction_output(GPIO_E740_WM9705_nAVDD2, 1);
+ if (ret)
+ goto free_apwr_gpio;
+
+ e740_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!e740_snd_device) {
+ ret = -ENOMEM;
+ goto free_apwr_gpio;
+ }
+
+ platform_set_drvdata(e740_snd_device, &e740_snd_devdata);
+ e740_snd_devdata.dev = &e740_snd_device->dev;
+ ret = platform_device_add(e740_snd_device);
+
+ if (!ret)
+ return 0;
+
+/* Fail gracefully */
+ platform_device_put(e740_snd_device);
+free_apwr_gpio:
+ gpio_free(GPIO_E740_WM9705_nAVDD2);
+free_op_amp_gpio:
+ gpio_free(GPIO_E740_AMP_ON);
+free_mic_amp_gpio:
+ gpio_free(GPIO_E740_MIC_ON);
+
+ return ret;
+}
+
+static void __exit e740_exit(void)
+{
+ platform_device_unregister(e740_snd_device);
+}
+
+module_init(e740_init);
+module_exit(e740_exit);
+
+/* Module information */
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("ALSA SoC driver for e740");
+MODULE_LICENSE("GPL v2");