defconfig: Enable defconfig to support USB
Enable defconfigs that are needed to support USB.
In device mode only ADB and DIAG are enabled.
Host mode supports HID, Audio, Storage and basic
USB to ethernet devices.
Change-Id: I2dd84e99ee87f207e58343c8056d7c7361c4fc8b
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
diff --git a/arch/arm/configs/msm8953-batcam-perf_defconfig b/arch/arm/configs/msm8953-batcam-perf_defconfig
index 5b886a82..a6fe9b0 100644
--- a/arch/arm/configs/msm8953-batcam-perf_defconfig
+++ b/arch/arm/configs/msm8953-batcam-perf_defconfig
@@ -79,9 +79,11 @@
CONFIG_DMA_CMA=y
# CONFIG_OF_KOBJ is not set
CONFIG_QSEECOM=y
+CONFIG_SCSI=y
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_NETDEVICES=y
+CONFIG_USB_USBNET=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_QPNP_POWER_ON=y
@@ -147,8 +149,43 @@
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_USB_AUDIO=y
CONFIG_SND_SOC=y
CONFIG_UHID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_MSM=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_EHSET_TEST_FIXTURE=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_DUAL_ROLE_USB_INTF=y
+CONFIG_USB_MSM_SSPHY_QMP=y
+CONFIG_MSM_QUSB_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_UEVENT=y
+CONFIG_USB_CONFIGFS_F_DIAG=y
CONFIG_MMC=y
CONFIG_MMC_PARANOID_SD_INIT=y
CONFIG_MMC_CLKGATE=y
@@ -189,6 +226,7 @@
CONFIG_SPS_SUPPORT_NDP_BAM=y
CONFIG_QPNP_COINCELL=y
CONFIG_QPNP_REVID=y
+CONFIG_USB_BAM=y
CONFIG_REMOTE_SPINLOCK_MSM=y
CONFIG_MAILBOX=y
CONFIG_ARM_SMMU=y
@@ -225,6 +263,7 @@
CONFIG_QCOM_DEVFREQ_DEVBW=y
CONFIG_SPDM_SCM=y
CONFIG_DEVFREQ_SPDM=y
+CONFIG_EXTCON_USB_GPIO=y
CONFIG_PWM=y
CONFIG_PWM_QPNP=y
CONFIG_PWM_QTI_LPG=y
diff --git a/arch/arm/configs/msm8953-batcam_defconfig b/arch/arm/configs/msm8953-batcam_defconfig
index dc6688c..cd86b01 100644
--- a/arch/arm/configs/msm8953-batcam_defconfig
+++ b/arch/arm/configs/msm8953-batcam_defconfig
@@ -78,9 +78,11 @@
CONFIG_DMA_CMA=y
# CONFIG_OF_KOBJ is not set
CONFIG_QSEECOM=y
+CONFIG_SCSI=y
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_NETDEVICES=y
+CONFIG_USB_USBNET=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_QPNP_POWER_ON=y
@@ -148,8 +150,43 @@
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_USB_AUDIO=y
CONFIG_SND_SOC=y
CONFIG_UHID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_MSM=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_EHSET_TEST_FIXTURE=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_DUAL_ROLE_USB_INTF=y
+CONFIG_USB_MSM_SSPHY_QMP=y
+CONFIG_MSM_QUSB_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_UEVENT=y
+CONFIG_USB_CONFIGFS_F_DIAG=y
CONFIG_MMC=y
CONFIG_MMC_PARANOID_SD_INIT=y
CONFIG_MMC_CLKGATE=y
@@ -190,6 +227,7 @@
CONFIG_SPS_SUPPORT_NDP_BAM=y
CONFIG_QPNP_COINCELL=y
CONFIG_QPNP_REVID=y
+CONFIG_USB_BAM=y
CONFIG_REMOTE_SPINLOCK_MSM=y
CONFIG_MAILBOX=y
CONFIG_ARM_SMMU=y
@@ -226,6 +264,7 @@
CONFIG_QCOM_DEVFREQ_DEVBW=y
CONFIG_SPDM_SCM=y
CONFIG_DEVFREQ_SPDM=y
+CONFIG_EXTCON_USB_GPIO=y
CONFIG_PWM=y
CONFIG_PWM_QPNP=y
CONFIG_PWM_QTI_LPG=y