ALSA: sound/pci/hda/hda_codec.c: various coding style fixes
Signed-off-by: Norberto Lopes <nlopes.ml@gmail.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 76d3c4c..5bd7cf4 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -978,8 +978,9 @@
*
* Returns 0 if successful, or a negative error code.
*/
-int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- struct hda_codec **codecp)
+int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus,
+ unsigned int codec_addr,
+ struct hda_codec **codecp)
{
struct hda_codec *codec;
char component[31];
@@ -1186,7 +1187,7 @@
*/
/* FIXME: more better hash key? */
-#define HDA_HASH_KEY(nid,dir,idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
+#define HDA_HASH_KEY(nid, dir, idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
#define HDA_HASH_PINCAP_KEY(nid) (u32)((nid) + (0x02 << 24))
#define HDA_HASH_PARPCM_KEY(nid) (u32)((nid) + (0x03 << 24))
#define HDA_HASH_PARSTR_KEY(nid) (u32)((nid) + (0x04 << 24))
@@ -1356,7 +1357,8 @@
if (!codec->no_trigger_sense) {
pincap = snd_hda_query_pin_caps(codec, nid);
if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
- snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_SET_PIN_SENSE, 0);
}
return snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
@@ -1372,8 +1374,8 @@
*/
int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid)
{
- u32 sense = snd_hda_pin_sense(codec, nid);
- return !!(sense & AC_PINSENSE_PRESENCE);
+ u32 sense = snd_hda_pin_sense(codec, nid);
+ return !!(sense & AC_PINSENSE_PRESENCE);
}
EXPORT_SYMBOL_HDA(snd_hda_jack_detect);
@@ -1952,7 +1954,7 @@
err = snd_hda_ctl_add(codec, 0, kctl);
if (err < 0)
return err;
-
+
for (s = slaves; *s; s++) {
struct snd_kcontrol *sctl;
int i = 0;
@@ -2439,27 +2441,27 @@
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
.info = snd_hda_spdif_mask_info,
.get = snd_hda_spdif_cmask_get,
},
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK),
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK),
.info = snd_hda_spdif_mask_info,
.get = snd_hda_spdif_pmask_get,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
.info = snd_hda_spdif_mask_info,
.get = snd_hda_spdif_default_get,
.put = snd_hda_spdif_default_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH),
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
.info = snd_hda_spdif_out_switch_info,
.get = snd_hda_spdif_out_switch_get,
.put = snd_hda_spdif_out_switch_put,
@@ -2610,7 +2612,7 @@
static struct snd_kcontrol_new dig_in_ctls[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH),
+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, SWITCH),
.info = snd_hda_spdif_in_switch_info,
.get = snd_hda_spdif_in_switch_get,
.put = snd_hda_spdif_in_switch_put,
@@ -2618,7 +2620,7 @@
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = SNDRV_CTL_NAME_IEC958("",CAPTURE,DEFAULT),
+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
.info = snd_hda_spdif_mask_info,
.get = snd_hda_spdif_in_status_get,
},
@@ -2883,7 +2885,7 @@
int err = snd_hda_codec_build_controls(codec);
if (err < 0) {
printk(KERN_ERR "hda_codec: cannot build controls"
- "for #%d (error %d)\n", codec->addr, err);
+ "for #%d (error %d)\n", codec->addr, err);
err = snd_hda_codec_reset(codec);
if (err < 0) {
printk(KERN_ERR
@@ -2979,8 +2981,12 @@
val |= channels - 1;
switch (snd_pcm_format_width(format)) {
- case 8: val |= 0x00; break;
- case 16: val |= 0x10; break;
+ case 8:
+ val |= 0x00;
+ break;
+ case 16:
+ val |= 0x10;
+ break;
case 20:
case 24:
case 32:
@@ -3298,7 +3304,8 @@
if (!test_and_set_bit(audio_idx[type][i], bus->pcm_dev_bits))
return audio_idx[type][i];
- snd_printk(KERN_WARNING "Too many %s devices\n", snd_hda_pcm_type_name[type]);
+ snd_printk(KERN_WARNING "Too many %s devices\n",
+ snd_hda_pcm_type_name[type]);
return -EAGAIN;
}
@@ -3336,7 +3343,7 @@
err = codec->patch_ops.build_pcms(codec);
if (err < 0) {
printk(KERN_ERR "hda_codec: cannot build PCMs"
- "for #%d (error %d)\n", codec->addr, err);
+ "for #%d (error %d)\n", codec->addr, err);
err = snd_hda_codec_reset(codec);
if (err < 0) {
printk(KERN_ERR
@@ -3466,8 +3473,8 @@
/**
* snd_hda_check_board_codec_sid_config - compare the current codec
- subsystem ID with the
- config table
+ subsystem ID with the
+ config table
This is important for Gateway notebooks with SB450 HDA Audio
where the vendor ID of the PCI device is:
@@ -3607,7 +3614,7 @@
*
* Increment the power-up counter and power up the hardware really when
* not turned on yet.
- */
+ */
void snd_hda_power_up(struct hda_codec *codec)
{
struct hda_bus *bus = codec->bus;
@@ -3636,7 +3643,7 @@
*
* Decrement the power-up counter and schedules the power-off work if
* the counter rearches to zero.
- */
+ */
void snd_hda_power_down(struct hda_codec *codec)
{
--codec->power_count;
@@ -3662,7 +3669,7 @@
*
* This function is supposed to be set or called from the check_power_status
* patch ops.
- */
+ */
int snd_hda_check_amp_list_power(struct hda_codec *codec,
struct hda_loopback_check *check,
hda_nid_t nid)
@@ -3830,7 +3837,7 @@
{
/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
- set_dig_out_convert(codec, nid,
+ set_dig_out_convert(codec, nid,
codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff,
-1);
snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
@@ -4089,13 +4096,13 @@
/*
* Sort an associated group of pins according to their sequence numbers.
*/
-static void sort_pins_by_sequence(hda_nid_t * pins, short * sequences,
+static void sort_pins_by_sequence(hda_nid_t *pins, short *sequences,
int num_pins)
{
int i, j;
short seq;
hda_nid_t nid;
-
+
for (i = 0; i < num_pins; i++) {
for (j = i + 1; j < num_pins; j++) {
if (sequences[i] > sequences[j]) {
@@ -4123,7 +4130,7 @@
* is detected, one of speaker of HP pins is assigned as the primary
* output, i.e. to line_out_pins[0]. So, line_outs is always positive
* if any analog output exists.
- *
+ *
* The analog input pins are assigned to input_pins array.
* The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
* respectively.
@@ -4186,9 +4193,9 @@
case AC_JACK_SPEAKER:
seq = get_defcfg_sequence(def_conf);
assoc = get_defcfg_association(def_conf);
- if (! assoc)
+ if (!assoc)
continue;
- if (! assoc_speaker)
+ if (!assoc_speaker)
assoc_speaker = assoc;
else if (assoc_speaker != assoc)
continue;
@@ -4286,7 +4293,7 @@
cfg->speaker_outs);
sort_pins_by_sequence(cfg->hp_pins, sequences_hp,
cfg->hp_outs);
-
+
/* if we have only one mic, make it AUTO_PIN_MIC */
if (!cfg->input_pins[AUTO_PIN_MIC] &&
cfg->input_pins[AUTO_PIN_FRONT_MIC]) {
@@ -4436,7 +4443,7 @@
/**
* snd_array_new - get a new element from the given array
* @array: the array object
- *
+ *
* Get a new element from the given array. If it exceeds the
* pre-allocated array size, re-allocate the array.
*