tgafb accelerated code
Add accelerated panning and accelerated color and mono image drawing.
Please apply.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org> (tested, too!)
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index 5345fe0..f0fde6e 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -59,6 +59,7 @@
static void tgafb_imageblit(struct fb_info *, const struct fb_image *);
static void tgafb_fillrect(struct fb_info *, const struct fb_fillrect *);
static void tgafb_copyarea(struct fb_info *, const struct fb_copyarea *);
+static int tgafb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
static int __devinit tgafb_register(struct device *dev);
static void __devexit tgafb_unregister(struct device *dev);
@@ -81,6 +82,7 @@
.fb_set_par = tgafb_set_par,
.fb_setcolreg = tgafb_setcolreg,
.fb_blank = tgafb_blank,
+ .fb_pan_display = tgafb_pan_display,
.fb_fillrect = tgafb_fillrect,
.fb_copyarea = tgafb_copyarea,
.fb_imageblit = tgafb_imageblit,
@@ -319,21 +321,7 @@
BT485_WRITE(par, 0x00, BT485_ADDR_PAL_WRITE);
TGA_WRITE_REG(par, BT485_DATA_PAL, TGA_RAMDAC_SETUP_REG);
-#ifdef CONFIG_HW_CONSOLE
- for (i = 0; i < 16; i++) {
- int j = color_table[i];
-
- TGA_WRITE_REG(par, default_red[j]|(BT485_DATA_PAL<<8),
- TGA_RAMDAC_REG);
- TGA_WRITE_REG(par, default_grn[j]|(BT485_DATA_PAL<<8),
- TGA_RAMDAC_REG);
- TGA_WRITE_REG(par, default_blu[j]|(BT485_DATA_PAL<<8),
- TGA_RAMDAC_REG);
- }
- for (i = 0; i < 240 * 3; i += 4) {
-#else
for (i = 0; i < 256 * 3; i += 4) {
-#endif
TGA_WRITE_REG(par, 0x55 | (BT485_DATA_PAL << 8),
TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00 | (BT485_DATA_PAL << 8),
@@ -358,18 +346,7 @@
BT459_LOAD_ADDR(par, 0x0000);
TGA_WRITE_REG(par, BT459_PALETTE << 2, TGA_RAMDAC_SETUP_REG);
-#ifdef CONFIG_HW_CONSOLE
- for (i = 0; i < 16; i++) {
- int j = color_table[i];
-
- TGA_WRITE_REG(par, default_red[j], TGA_RAMDAC_REG);
- TGA_WRITE_REG(par, default_grn[j], TGA_RAMDAC_REG);
- TGA_WRITE_REG(par, default_blu[j], TGA_RAMDAC_REG);
- }
- for (i = 0; i < 240 * 3; i += 4) {
-#else
for (i = 0; i < 256 * 3; i += 4) {
-#endif
TGA_WRITE_REG(par, 0x55, TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG);
TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG);
@@ -646,16 +623,8 @@
* Acceleration.
*/
-/**
- * tgafb_imageblit - REQUIRED function. Can use generic routines if
- * non acclerated hardware and packed pixel based.
- * Copies a image from system memory to the screen.
- *
- * @info: frame buffer structure that represents a single frame buffer
- * @image: structure defining the image.
- */
static void
-tgafb_imageblit(struct fb_info *info, const struct fb_image *image)
+tgafb_mono_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct tga_par *par = (struct tga_par *) info->par;
u32 fgcolor, bgcolor, dx, dy, width, height, vxres, vyres, pixelmask;
@@ -665,6 +634,17 @@
void __iomem *regs_base;
void __iomem *fb_base;
+ is8bpp = info->var.bits_per_pixel == 8;
+
+ /* For copies that aren't pixel expansion, there's little we
+ can do better than the generic code. */
+ /* ??? There is a DMA write mode; I wonder if that could be
+ made to pull the data from the image buffer... */
+ if (image->depth > 1) {
+ cfb_imageblit(info, image);
+ return;
+ }
+
dx = image->dx;
dy = image->dy;
width = image->width;
@@ -682,18 +662,8 @@
if (dy + height > vyres)
height = vyres - dy;
- /* For copies that aren't pixel expansion, there's little we
- can do better than the generic code. */
- /* ??? There is a DMA write mode; I wonder if that could be
- made to pull the data from the image buffer... */
- if (image->depth > 1) {
- cfb_imageblit(info, image);
- return;
- }
-
regs_base = par->tga_regs_base;
fb_base = par->tga_fb_base;
- is8bpp = info->var.bits_per_pixel == 8;
/* Expand the color values to fill 32-bits. */
/* ??? Would be nice to notice colour changes elsewhere, so
@@ -871,6 +841,85 @@
regs_base + TGA_MODE_REG);
}
+static void
+tgafb_clut_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ struct tga_par *par = (struct tga_par *) info->par;
+ u32 color, dx, dy, width, height, vxres, vyres;
+ u32 *palette = ((u32 *)info->pseudo_palette);
+ unsigned long pos, line_length, i, j;
+ const unsigned char *data;
+ void *regs_base, *fb_base;
+
+ dx = image->dx;
+ dy = image->dy;
+ width = image->width;
+ height = image->height;
+ vxres = info->var.xres_virtual;
+ vyres = info->var.yres_virtual;
+ line_length = info->fix.line_length;
+
+ /* Crop the image to the screen. */
+ if (dx > vxres || dy > vyres)
+ return;
+ if (dx + width > vxres)
+ width = vxres - dx;
+ if (dy + height > vyres)
+ height = vyres - dy;
+
+ regs_base = par->tga_regs_base;
+ fb_base = par->tga_fb_base;
+
+ pos = dy * line_length + (dx * 4);
+ data = image->data;
+
+ /* Now copy the image, color_expanding via the palette. */
+ for (i = 0; i < height; i++) {
+ for (j = 0; j < width; j++) {
+ color = palette[*data++];
+ __raw_writel(color, fb_base + pos + j*4);
+ }
+ pos += line_length;
+ }
+}
+
+/**
+ * tgafb_imageblit - REQUIRED function. Can use generic routines if
+ * non acclerated hardware and packed pixel based.
+ * Copies a image from system memory to the screen.
+ *
+ * @info: frame buffer structure that represents a single frame buffer
+ * @image: structure defining the image.
+ */
+static void
+tgafb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ unsigned int is8bpp = info->var.bits_per_pixel == 8;
+
+ /* If a mono image, regardless of FB depth, go do it. */
+ if (image->depth == 1) {
+ tgafb_mono_imageblit(info, image);
+ return;
+ }
+
+ /* For copies that aren't pixel expansion, there's little we
+ can do better than the generic code. */
+ /* ??? There is a DMA write mode; I wonder if that could be
+ made to pull the data from the image buffer... */
+ if (image->depth == info->var.bits_per_pixel) {
+ cfb_imageblit(info, image);
+ return;
+ }
+
+ /* If 24-plane FB and the image is 8-plane with CLUT, we can do it. */
+ if (!is8bpp && image->depth == 8) {
+ tgafb_clut_imageblit(info, image);
+ return;
+ }
+
+ /* Silently return... */
+}
+
/**
* tgafb_fillrect - REQUIRED function. Can use generic routines if
* non acclerated hardware and packed pixel based.
@@ -1480,6 +1529,26 @@
info->fix.ywrapstep = 0;
info->fix.accel = FB_ACCEL_DEC_TGA;
+
+ /*
+ * These are needed by fb_set_logo_truepalette(), so we
+ * set them here for 24-plane cards.
+ */
+ if (tga_type != TGA_TYPE_8PLANE) {
+ info->var.red.length = 8;
+ info->var.green.length = 8;
+ info->var.blue.length = 8;
+ info->var.red.offset = 16;
+ info->var.green.offset = 8;
+ info->var.blue.offset = 0;
+ }
+}
+
+static int tgafb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ /* We just use this to catch switches out of graphics mode. */
+ tgafb_set_par(info); /* A bit of overkill for BASE_ADDR reset. */
+ return 0;
}
static int __devinit