/*
 * INET		802.1Q VLAN
 *		Ethernet-type device handling.
 *
 * Authors:	Ben Greear <greearb@candelatech.com>
 *              Please send support related email to: vlan@scry.wanfear.com
 *              VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
 *
 * Fixes:
 *              Fix for packet capture - Nick Eggleston <nick@dccinc.com>;
 *		Add HW acceleration hooks - David S. Miller <davem@redhat.com>;
 *		Correct all the locking - David S. Miller <davem@redhat.com>;
 *		Use hash table for VLAN groups - David S. Miller <davem@redhat.com>
 *
 *		This program is free software; you can redistribute it and/or
 *		modify it under the terms of the GNU General Public License
 *		as published by the Free Software Foundation; either version
 *		2 of the License, or (at your option) any later version.
 */

#include <asm/uaccess.h> /* for copy_from_user */
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/datalink.h>
#include <linux/mm.h>
#include <linux/in.h>
#include <linux/init.h>
#include <net/p8022.h>
#include <net/arp.h>
#include <linux/rtnetlink.h>
#include <linux/notifier.h>

#include <linux/if_vlan.h>
#include "vlan.h"
#include "vlanproc.h"

#define DRV_VERSION "1.8"

/* Global VLAN variables */

/* Our listing of VLAN group(s) */
static struct hlist_head vlan_group_hash[VLAN_GRP_HASH_SIZE];
#define vlan_grp_hashfn(IDX)	((((IDX) >> VLAN_GRP_HASH_SHIFT) ^ (IDX)) & VLAN_GRP_HASH_MASK)

static char vlan_fullname[] = "802.1Q VLAN Support";
static char vlan_version[] = DRV_VERSION;
static char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>";
static char vlan_buggyright[] = "David S. Miller <davem@redhat.com>";

static int vlan_device_event(struct notifier_block *, unsigned long, void *);
static int vlan_ioctl_handler(void __user *);
static int unregister_vlan_dev(struct net_device *, unsigned short );

static struct notifier_block vlan_notifier_block = {
	.notifier_call = vlan_device_event,
};

/* These may be changed at run-time through IOCTLs */

/* Determines interface naming scheme. */
unsigned short vlan_name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD;

static struct packet_type vlan_packet_type = {
	.type = __constant_htons(ETH_P_8021Q),
	.func = vlan_skb_recv, /* VLAN receive method */
};

/* End of global variables definitions. */

/*
 * Function vlan_proto_init (pro)
 *
 *    Initialize VLAN protocol layer,
 *
 */
static int __init vlan_proto_init(void)
{
	int err;

	printk(VLAN_INF "%s v%s %s\n",
	       vlan_fullname, vlan_version, vlan_copyright);
	printk(VLAN_INF "All bugs added by %s\n",
	       vlan_buggyright);

	/* proc file system initialization */
	err = vlan_proc_init();
	if (err < 0) {
		printk(KERN_ERR
		       "%s %s: can't create entry in proc filesystem!\n",
		       __FUNCTION__, VLAN_NAME);
		return err;
	}

	dev_add_pack(&vlan_packet_type);

	/* Register us to receive netdevice events */
	err = register_netdevice_notifier(&vlan_notifier_block);
	if (err < 0) {
		dev_remove_pack(&vlan_packet_type);
		vlan_proc_cleanup();
		return err;
	}

	vlan_ioctl_set(vlan_ioctl_handler);

	return 0;
}

/* Cleanup all vlan devices
 * Note: devices that have been registered that but not
 * brought up will exist but have no module ref count.
 */
static void __exit vlan_cleanup_devices(void)
{
	struct net_device *dev, *nxt;

	rtnl_lock();
	for_each_netdev_safe(dev, nxt) {
		if (dev->priv_flags & IFF_802_1Q_VLAN) {
			unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
					    VLAN_DEV_INFO(dev)->vlan_id);

			unregister_netdevice(dev);
		}
	}
	rtnl_unlock();
}

/*
 *     Module 'remove' entry point.
 *     o delete /proc/net/router directory and static entries.
 */
static void __exit vlan_cleanup_module(void)
{
	int i;

	vlan_ioctl_set(NULL);

	/* Un-register us from receiving netdevice events */
	unregister_netdevice_notifier(&vlan_notifier_block);

	dev_remove_pack(&vlan_packet_type);
	vlan_cleanup_devices();

	/* This table must be empty if there are no module
	 * references left.
	 */
	for (i = 0; i < VLAN_GRP_HASH_SIZE; i++) {
		BUG_ON(!hlist_empty(&vlan_group_hash[i]));
	}
	vlan_proc_cleanup();

	synchronize_net();
}

module_init(vlan_proto_init);
module_exit(vlan_cleanup_module);

/* Must be invoked with RCU read lock (no preempt) */
static struct vlan_group *__vlan_find_group(int real_dev_ifindex)
{
	struct vlan_group *grp;
	struct hlist_node *n;
	int hash = vlan_grp_hashfn(real_dev_ifindex);

	hlist_for_each_entry_rcu(grp, n, &vlan_group_hash[hash], hlist) {
		if (grp->real_dev_ifindex == real_dev_ifindex)
			return grp;
	}

	return NULL;
}

/*  Find the protocol handler.  Assumes VID < VLAN_VID_MASK.
 *
 * Must be invoked with RCU read lock (no preempt)
 */
struct net_device *__find_vlan_dev(struct net_device *real_dev,
				   unsigned short VID)
{
	struct vlan_group *grp = __vlan_find_group(real_dev->ifindex);

	if (grp)
		return vlan_group_get_device(grp, VID);

	return NULL;
}

static void vlan_group_free(struct vlan_group *grp)
{
	int i;

	for (i=0; i < VLAN_GROUP_ARRAY_SPLIT_PARTS; i++)
		kfree(grp->vlan_devices_arrays[i]);
	kfree(grp);
}

static void vlan_rcu_free(struct rcu_head *rcu)
{
	vlan_group_free(container_of(rcu, struct vlan_group, rcu));
}


/* This returns 0 if everything went fine.
 * It will return 1 if the group was killed as a result.
 * A negative return indicates failure.
 *
 * The RTNL lock must be held.
 */
static int unregister_vlan_dev(struct net_device *real_dev,
			       unsigned short vlan_id)
{
	struct net_device *dev = NULL;
	int real_dev_ifindex = real_dev->ifindex;
	struct vlan_group *grp;
	int i, ret;

#ifdef VLAN_DEBUG
	printk(VLAN_DBG "%s: VID: %i\n", __FUNCTION__, vlan_id);
#endif

	/* sanity check */
	if (vlan_id >= VLAN_VID_MASK)
		return -EINVAL;

	ASSERT_RTNL();
	grp = __vlan_find_group(real_dev_ifindex);

	ret = 0;

	if (grp) {
		dev = vlan_group_get_device(grp, vlan_id);
		if (dev) {
			/* Remove proc entry */
			vlan_proc_rem_dev(dev);

			/* Take it out of our own structures, but be sure to
			 * interlock with HW accelerating devices or SW vlan
			 * input packet processing.
			 */
			if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
				real_dev->vlan_rx_kill_vid(real_dev, vlan_id);

			vlan_group_set_device(grp, vlan_id, NULL);
			synchronize_net();


			/* Caller unregisters (and if necessary, puts)
			 * VLAN device, but we get rid of the reference to
			 * real_dev here.
			 */
			dev_put(real_dev);

			/* If the group is now empty, kill off the
			 * group.
			 */
			for (i = 0; i < VLAN_VID_MASK; i++)
				if (vlan_group_get_device(grp, i))
					break;

			if (i == VLAN_VID_MASK) {
				if (real_dev->features & NETIF_F_HW_VLAN_RX)
					real_dev->vlan_rx_register(real_dev, NULL);

				hlist_del_rcu(&grp->hlist);

				/* Free the group, after all cpu's are done. */
				call_rcu(&grp->rcu, vlan_rcu_free);

				grp = NULL;
				ret = 1;
			}
		}
	}

	return ret;
}

static int unregister_vlan_device(const char *vlan_IF_name)
{
	struct net_device *dev = NULL;
	int ret;


	dev = dev_get_by_name(vlan_IF_name);
	ret = -EINVAL;
	if (dev) {
		if (dev->priv_flags & IFF_802_1Q_VLAN) {
			rtnl_lock();

			ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
						  VLAN_DEV_INFO(dev)->vlan_id);

			dev_put(dev);
			unregister_netdevice(dev);

			rtnl_unlock();

			if (ret == 1)
				ret = 0;
		} else {
			printk(VLAN_ERR
			       "%s: ERROR:	Tried to remove a non-vlan device "
			       "with VLAN code, name: %s  priv_flags: %hX\n",
			       __FUNCTION__, dev->name, dev->priv_flags);
			dev_put(dev);
			ret = -EPERM;
		}
	} else {
#ifdef VLAN_DEBUG
		printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__);
#endif
		ret = -EINVAL;
	}

	return ret;
}

static void vlan_setup(struct net_device *new_dev)
{
	SET_MODULE_OWNER(new_dev);

	/* new_dev->ifindex = 0;  it will be set when added to
	 * the global list.
	 * iflink is set as well.
	 */
	new_dev->get_stats = vlan_dev_get_stats;

	/* Make this thing known as a VLAN device */
	new_dev->priv_flags |= IFF_802_1Q_VLAN;

	/* Set us up to have no queue, as the underlying Hardware device
	 * can do all the queueing we could want.
	 */
	new_dev->tx_queue_len = 0;

	/* set up method calls */
	new_dev->change_mtu = vlan_dev_change_mtu;
	new_dev->open = vlan_dev_open;
	new_dev->stop = vlan_dev_stop;
	new_dev->set_mac_address = vlan_dev_set_mac_address;
	new_dev->set_multicast_list = vlan_dev_set_multicast_list;
	new_dev->destructor = free_netdev;
	new_dev->do_ioctl = vlan_dev_ioctl;
}

static void vlan_transfer_operstate(const struct net_device *dev, struct net_device *vlandev)
{
	/* Have to respect userspace enforced dormant state
	 * of real device, also must allow supplicant running
	 * on VLAN device
	 */
	if (dev->operstate == IF_OPER_DORMANT)
		netif_dormant_on(vlandev);
	else
		netif_dormant_off(vlandev);

	if (netif_carrier_ok(dev)) {
		if (!netif_carrier_ok(vlandev))
			netif_carrier_on(vlandev);
	} else {
		if (netif_carrier_ok(vlandev))
			netif_carrier_off(vlandev);
	}
}

/*
 * vlan network devices have devices nesting below it, and are a special
 * "super class" of normal network devices; split their locks off into a
 * separate class since they always nest.
 */
static struct lock_class_key vlan_netdev_xmit_lock_key;


/*  Attach a VLAN device to a mac address (ie Ethernet Card).
 *  Returns the device that was created, or NULL if there was
 *  an error of some kind.
 */
static struct net_device *register_vlan_device(const char *eth_IF_name,
					       unsigned short VLAN_ID)
{
	struct vlan_group *grp;
	struct net_device *new_dev;
	struct net_device *real_dev; /* the ethernet device */
	char name[IFNAMSIZ];
	int i;

#ifdef VLAN_DEBUG
	printk(VLAN_DBG "%s: if_name -:%s:-	vid: %i\n",
		__FUNCTION__, eth_IF_name, VLAN_ID);
#endif

	if (VLAN_ID >= VLAN_VID_MASK)
		goto out_ret_null;

	/* find the device relating to eth_IF_name. */
	real_dev = dev_get_by_name(eth_IF_name);
	if (!real_dev)
		goto out_ret_null;

	if (real_dev->features & NETIF_F_VLAN_CHALLENGED) {
		printk(VLAN_DBG "%s: VLANs not supported on %s.\n",
			__FUNCTION__, real_dev->name);
		goto out_put_dev;
	}

	if ((real_dev->features & NETIF_F_HW_VLAN_RX) &&
	    !real_dev->vlan_rx_register) {
		printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n",
			__FUNCTION__, real_dev->name);
		goto out_put_dev;
	}

	if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) &&
	    (!real_dev->vlan_rx_add_vid || !real_dev->vlan_rx_kill_vid)) {
		printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n",
			__FUNCTION__, real_dev->name);
		goto out_put_dev;
	}

	/* From this point on, all the data structures must remain
	 * consistent.
	 */
	rtnl_lock();

	/* The real device must be up and operating in order to
	 * assosciate a VLAN device with it.
	 */
	if (!(real_dev->flags & IFF_UP))
		goto out_unlock;

	if (__find_vlan_dev(real_dev, VLAN_ID) != NULL) {
		/* was already registered. */
		printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__);
		goto out_unlock;
	}

	/* Gotta set up the fields for the device. */
#ifdef VLAN_DEBUG
	printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n",
	       vlan_name_type);
#endif
	switch (vlan_name_type) {
	case VLAN_NAME_TYPE_RAW_PLUS_VID:
		/* name will look like:	 eth1.0005 */
		snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, VLAN_ID);
		break;
	case VLAN_NAME_TYPE_PLUS_VID_NO_PAD:
		/* Put our vlan.VID in the name.
		 * Name will look like:	 vlan5
		 */
		snprintf(name, IFNAMSIZ, "vlan%i", VLAN_ID);
		break;
	case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD:
		/* Put our vlan.VID in the name.
		 * Name will look like:	 eth0.5
		 */
		snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, VLAN_ID);
		break;
	case VLAN_NAME_TYPE_PLUS_VID:
		/* Put our vlan.VID in the name.
		 * Name will look like:	 vlan0005
		 */
	default:
		snprintf(name, IFNAMSIZ, "vlan%.4i", VLAN_ID);
	}

	new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name,
			       vlan_setup);

	if (new_dev == NULL)
		goto out_unlock;

#ifdef VLAN_DEBUG
	printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name);
#endif
	/* IFF_BROADCAST|IFF_MULTICAST; ??? */
	new_dev->flags = real_dev->flags;
	new_dev->flags &= ~IFF_UP;

	new_dev->state = (real_dev->state & ((1<<__LINK_STATE_NOCARRIER) |
					     (1<<__LINK_STATE_DORMANT))) |
			 (1<<__LINK_STATE_PRESENT);

	/* need 4 bytes for extra VLAN header info,
	 * hope the underlying device can handle it.
	 */
	new_dev->mtu = real_dev->mtu;

	/* TODO: maybe just assign it to be ETHERNET? */
	new_dev->type = real_dev->type;

	new_dev->hard_header_len = real_dev->hard_header_len;
	if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) {
		/* Regular ethernet + 4 bytes (18 total). */
		new_dev->hard_header_len += VLAN_HLEN;
	}

	VLAN_MEM_DBG("new_dev->priv malloc, addr: %p  size: %i\n",
		     new_dev->priv,
		     sizeof(struct vlan_dev_info));

	memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len);
	memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len);
	new_dev->addr_len = real_dev->addr_len;

	if (real_dev->features & NETIF_F_HW_VLAN_TX) {
		new_dev->hard_header = real_dev->hard_header;
		new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit;
		new_dev->rebuild_header = real_dev->rebuild_header;
	} else {
		new_dev->hard_header = vlan_dev_hard_header;
		new_dev->hard_start_xmit = vlan_dev_hard_start_xmit;
		new_dev->rebuild_header = vlan_dev_rebuild_header;
	}
	new_dev->hard_header_parse = real_dev->hard_header_parse;

	VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */
	VLAN_DEV_INFO(new_dev)->real_dev = real_dev;
	VLAN_DEV_INFO(new_dev)->dent = NULL;
	VLAN_DEV_INFO(new_dev)->flags = 1;

#ifdef VLAN_DEBUG
	printk(VLAN_DBG "About to go find the group for idx: %i\n",
	       real_dev->ifindex);
#endif

	if (register_netdevice(new_dev))
		goto out_free_newdev;

	lockdep_set_class(&new_dev->_xmit_lock, &vlan_netdev_xmit_lock_key);

	new_dev->iflink = real_dev->ifindex;
	vlan_transfer_operstate(real_dev, new_dev);
	linkwatch_fire_event(new_dev); /* _MUST_ call rfc2863_policy() */

	/* So, got the sucker initialized, now lets place
	 * it into our local structure.
	 */
	grp = __vlan_find_group(real_dev->ifindex);

	/* Note, we are running under the RTNL semaphore
	 * so it cannot "appear" on us.
	 */
	if (!grp) { /* need to add a new group */
		grp = kzalloc(sizeof(struct vlan_group), GFP_KERNEL);
		if (!grp)
			goto out_free_unregister;

		for (i=0; i < VLAN_GROUP_ARRAY_SPLIT_PARTS; i++) {
			grp->vlan_devices_arrays[i] = kzalloc(
				sizeof(struct net_device *)*VLAN_GROUP_ARRAY_PART_LEN,
				GFP_KERNEL);

			if (!grp->vlan_devices_arrays[i])
				goto out_free_arrays;
		}

		/* printk(KERN_ALERT "VLAN REGISTER:  Allocated new group.\n"); */
		grp->real_dev_ifindex = real_dev->ifindex;

		hlist_add_head_rcu(&grp->hlist,
				   &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]);

		if (real_dev->features & NETIF_F_HW_VLAN_RX)
			real_dev->vlan_rx_register(real_dev, grp);
	}

	vlan_group_set_device(grp, VLAN_ID, new_dev);

	if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */
		printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n",
							 new_dev->name);

	if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
		real_dev->vlan_rx_add_vid(real_dev, VLAN_ID);

	rtnl_unlock();


#ifdef VLAN_DEBUG
	printk(VLAN_DBG "Allocated new device successfully, returning.\n");
#endif
	return new_dev;

out_free_arrays:
	vlan_group_free(grp);

out_free_unregister:
	unregister_netdev(new_dev);
	goto out_unlock;

out_free_newdev:
	free_netdev(new_dev);

out_unlock:
	rtnl_unlock();

out_put_dev:
	dev_put(real_dev);

out_ret_null:
	return NULL;
}

static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr)
{
	struct net_device *dev = ptr;
	struct vlan_group *grp = __vlan_find_group(dev->ifindex);
	int i, flgs;
	struct net_device *vlandev;

	if (!grp)
		goto out;

	/* It is OK that we do not hold the group lock right now,
	 * as we run under the RTNL lock.
	 */

	switch (event) {
	case NETDEV_CHANGE:
		/* Propagate real device state to vlan devices */
		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
			vlandev = vlan_group_get_device(grp, i);
			if (!vlandev)
				continue;

			vlan_transfer_operstate(dev, vlandev);
		}
		break;

	case NETDEV_DOWN:
		/* Put all VLANs for this dev in the down state too.  */
		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
			vlandev = vlan_group_get_device(grp, i);
			if (!vlandev)
				continue;

			flgs = vlandev->flags;
			if (!(flgs & IFF_UP))
				continue;

			dev_change_flags(vlandev, flgs & ~IFF_UP);
		}
		break;

	case NETDEV_UP:
		/* Put all VLANs for this dev in the up state too.  */
		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
			vlandev = vlan_group_get_device(grp, i);
			if (!vlandev)
				continue;

			flgs = vlandev->flags;
			if (flgs & IFF_UP)
				continue;

			dev_change_flags(vlandev, flgs | IFF_UP);
		}
		break;

	case NETDEV_UNREGISTER:
		/* Delete all VLANs for this dev. */
		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
			int ret;

			vlandev = vlan_group_get_device(grp, i);
			if (!vlandev)
				continue;

			ret = unregister_vlan_dev(dev,
						  VLAN_DEV_INFO(vlandev)->vlan_id);

			unregister_netdevice(vlandev);

			/* Group was destroyed? */
			if (ret == 1)
				break;
		}
		break;
	}

out:
	return NOTIFY_DONE;
}

/*
 *	VLAN IOCTL handler.
 *	o execute requested action or pass command to the device driver
 *   arg is really a struct vlan_ioctl_args __user *.
 */
static int vlan_ioctl_handler(void __user *arg)
{
	int err = 0;
	unsigned short vid = 0;
	struct vlan_ioctl_args args;

	if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args)))
		return -EFAULT;

	/* Null terminate this sucker, just in case. */
	args.device1[23] = 0;
	args.u.device2[23] = 0;

#ifdef VLAN_DEBUG
	printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd);
#endif

	switch (args.cmd) {
	case SET_VLAN_INGRESS_PRIORITY_CMD:
		if (!capable(CAP_NET_ADMIN))
			return -EPERM;
		err = vlan_dev_set_ingress_priority(args.device1,
						    args.u.skb_priority,
						    args.vlan_qos);
		break;

	case SET_VLAN_EGRESS_PRIORITY_CMD:
		if (!capable(CAP_NET_ADMIN))
			return -EPERM;
		err = vlan_dev_set_egress_priority(args.device1,
						   args.u.skb_priority,
						   args.vlan_qos);
		break;

	case SET_VLAN_FLAG_CMD:
		if (!capable(CAP_NET_ADMIN))
			return -EPERM;
		err = vlan_dev_set_vlan_flag(args.device1,
					     args.u.flag,
					     args.vlan_qos);
		break;

	case SET_VLAN_NAME_TYPE_CMD:
		if (!capable(CAP_NET_ADMIN))
			return -EPERM;
		if (args.u.name_type < VLAN_NAME_TYPE_HIGHEST) {
			vlan_name_type = args.u.name_type;
			err = 0;
		} else {
			err = -EINVAL;
		}
		break;

	case ADD_VLAN_CMD:
		if (!capable(CAP_NET_ADMIN))
			return -EPERM;
		/* we have been given the name of the Ethernet Device we want to
		 * talk to:  args.dev1	 We also have the
		 * VLAN ID:  args.u.VID
		 */
		if (register_vlan_device(args.device1, args.u.VID)) {
			err = 0;
		} else {
			err = -EINVAL;
		}
		break;

	case DEL_VLAN_CMD:
		if (!capable(CAP_NET_ADMIN))
			return -EPERM;
		/* Here, the args.dev1 is the actual VLAN we want
		 * to get rid of.
		 */
		err = unregister_vlan_device(args.device1);
		break;

	case GET_VLAN_INGRESS_PRIORITY_CMD:
		/* TODO:  Implement
		   err = vlan_dev_get_ingress_priority(args);
		   if (copy_to_user((void*)arg, &args,
			sizeof(struct vlan_ioctl_args))) {
			err = -EFAULT;
		   }
		*/
		err = -EINVAL;
		break;
	case GET_VLAN_EGRESS_PRIORITY_CMD:
		/* TODO:  Implement
		   err = vlan_dev_get_egress_priority(args.device1, &(args.args);
		   if (copy_to_user((void*)arg, &args,
			sizeof(struct vlan_ioctl_args))) {
			err = -EFAULT;
		   }
		*/
		err = -EINVAL;
		break;
	case GET_VLAN_REALDEV_NAME_CMD:
		err = vlan_dev_get_realdev_name(args.device1, args.u.device2);
		if (err)
			goto out;
		if (copy_to_user(arg, &args,
				 sizeof(struct vlan_ioctl_args))) {
			err = -EFAULT;
		}
		break;

	case GET_VLAN_VID_CMD:
		err = vlan_dev_get_vid(args.device1, &vid);
		if (err)
			goto out;
		args.u.VID = vid;
		if (copy_to_user(arg, &args,
				 sizeof(struct vlan_ioctl_args))) {
		      err = -EFAULT;
		}
		break;

	default:
		/* pass on to underlying device instead?? */
		printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n",
			__FUNCTION__, args.cmd);
		return -EINVAL;
	}
out:
	return err;
}

MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);