[SCSI] aic94xx: new driver
This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>
The log of the separate development is:
Alexis Bruemmer:
o aic94xx: fix hotplug/unplug for expanderless systems
o aic94xx: disable split completion timer/setting by default
o aic94xx: wide port off expander support
o aic94xx: remove various inline functions
o aic94xx: use bitops
o aic94xx: remove queue comment
o aic94xx: remove sas_common.c
o aic94xx: sas remove depot's
o aic94xx: use available list_for_each_entry_safe_reverse()
o aic94xx: sas header file merge
James Bottomley:
o aic94xx: fix TF_TMF_NO_CTX processing
o aic94xx: convert to request_firmware interface
o aic94xx: fix hotplug/unplug
o aic94xx: add link error counts to the expander phys
o aic94xx: add transport class phy reset capability
o aic94xx: remove local_attached flag
o Remove README
o Fixup Makefile variable for libsas rename
o Rename sas->libsas
o aic94xx: correct return code for sas_discover_event
o aic94xx: use parent backlink port
o aic94xx: remove channel abstraction
o aic94xx: fix routing algorithms
o aic94xx: add backlink port
o aic94xx: fix cascaded expander properties
o aic94xx: fix sleep under lock
o aic94xx: fix panic on module removal in complex topology
o aic94xx: make use of the new sas_port
o rename sas_port to asd_sas_port
o Fix for eh_strategy_handler move
o aic94xx: move entirely over to correct transport class formulation
o remove last vestages of sas_rphy_alloc()
o update for eh_timed_out move
o Preliminary expander support for aic94xx
o sas: remove event thread
o minor warning cleanups
o remove last vestiges of id mapping arrays
o Further updates
o Convert aic94xx over entirely to the transport class end device and
o update aic94xx/sas to use the new sas transport class end device
o [PATCH] aic94xx: attaching to the sas transport class
o Add missing completion removal from prior patch
o [PATCH] aic94xx: attaching to the sas transport class
o Build fixes from akpm
Jeff Garzik:
o [scsi aic94xx] Remove ->owner from PCI info table
Luben Tuikov:
o initial aic94xx driver
Mike Anderson:
o aic94xx: fix panic on module insertion
o aic94xx: stub out SATA_DEV case
o aic94xx: compile warning cleanups
o aic94xx: sas_alloc_task
o aic94xx: ref count update
o aic94xx nexus loss time value
o [PATCH] aic94xx: driver assertion in non-x86 BIOS env
Randy Dunlap:
o libsas: externs not needed
Robert Tarte:
o aic94xx: sequence patch - fixes SATA support
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
new file mode 100644
index 0000000..253cdcf
--- /dev/null
+++ b/drivers/scsi/libsas/sas_port.c
@@ -0,0 +1,279 @@
+/*
+ * Serial Attached SCSI (SAS) Port class
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/**
+ * sas_form_port -- add this phy to a port
+ * @phy: the phy of interest
+ *
+ * This function adds this phy to an existing port, thus creating a wide
+ * port, or it creates a port and adds the phy to the port.
+ */
+static void sas_form_port(struct asd_sas_phy *phy)
+{
+ int i;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *si =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (port) {
+ if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
+ SAS_ADDR_SIZE) == 0)
+ sas_deform_port(phy);
+ else {
+ SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
+ __FUNCTION__, phy->id, phy->port->id,
+ phy->port->num_phys);
+ return;
+ }
+ }
+
+ /* find a port */
+ spin_lock(&sas_ha->phy_port_lock);
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ port = sas_ha->sas_port[i];
+ spin_lock(&port->phy_list_lock);
+ if (*(u64 *) port->sas_addr &&
+ memcmp(port->attached_sas_addr,
+ phy->attached_sas_addr, SAS_ADDR_SIZE) == 0 &&
+ port->num_phys > 0) {
+ /* wide port */
+ SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
+ port->id);
+ break;
+ } else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
+ memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
+ break;
+ }
+ spin_unlock(&port->phy_list_lock);
+ }
+
+ if (i >= sas_ha->num_phys) {
+ printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
+ __FUNCTION__);
+ spin_unlock(&sas_ha->phy_port_lock);
+ return;
+ }
+
+ /* add the phy to the port */
+ list_add_tail(&phy->port_phy_el, &port->phy_list);
+ phy->port = port;
+ port->num_phys++;
+ port->phy_mask |= (1U << phy->id);
+
+ if (!port->phy)
+ port->phy = phy->phy;
+
+ SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id,
+ port->id, port->phy_mask);
+
+ if (*(u64 *)port->attached_sas_addr == 0) {
+ port->class = phy->class;
+ memcpy(port->attached_sas_addr, phy->attached_sas_addr,
+ SAS_ADDR_SIZE);
+ port->iproto = phy->iproto;
+ port->tproto = phy->tproto;
+ port->oob_mode = phy->oob_mode;
+ port->linkrate = phy->linkrate;
+ } else
+ port->linkrate = max(port->linkrate, phy->linkrate);
+ spin_unlock(&port->phy_list_lock);
+ spin_unlock(&sas_ha->phy_port_lock);
+
+ if (!port->port) {
+ port->port = sas_port_alloc(phy->phy->dev.parent, port->id);
+ BUG_ON(!port->port);
+ sas_port_add(port->port);
+ }
+ sas_port_add_phy(port->port, phy->phy);
+
+ if (port->port_dev)
+ port->port_dev->pathways = port->num_phys;
+
+ /* Tell the LLDD about this port formation. */
+ if (si->dft->lldd_port_formed)
+ si->dft->lldd_port_formed(phy);
+
+ sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
+}
+
+/**
+ * sas_deform_port -- remove this phy from the port it belongs to
+ * @phy: the phy of interest
+ *
+ * This is called when the physical link to the other phy has been
+ * lost (on this phy), in Event thread context. We cannot delay here.
+ */
+void sas_deform_port(struct asd_sas_phy *phy)
+{
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *si =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (!port)
+ return; /* done by a phy event */
+
+ if (port->port_dev)
+ port->port_dev->pathways--;
+
+ if (port->num_phys == 1) {
+ sas_unregister_domain_devices(port);
+ sas_port_delete(port->port);
+ port->port = NULL;
+ } else
+ sas_port_delete_phy(port->port, phy->phy);
+
+
+ if (si->dft->lldd_port_deformed)
+ si->dft->lldd_port_deformed(phy);
+
+ spin_lock(&sas_ha->phy_port_lock);
+ spin_lock(&port->phy_list_lock);
+
+ list_del_init(&phy->port_phy_el);
+ phy->port = NULL;
+ port->num_phys--;
+ port->phy_mask &= ~(1U << phy->id);
+
+ if (port->num_phys == 0) {
+ INIT_LIST_HEAD(&port->phy_list);
+ memset(port->sas_addr, 0, SAS_ADDR_SIZE);
+ memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ port->class = 0;
+ port->iproto = 0;
+ port->tproto = 0;
+ port->oob_mode = 0;
+ port->phy_mask = 0;
+ }
+ spin_unlock(&port->phy_list_lock);
+ spin_unlock(&sas_ha->phy_port_lock);
+
+ return;
+}
+
+/* ---------- SAS port events ---------- */
+
+void sas_porte_bytes_dmaed(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_BYTES_DMAED, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_form_port(phy);
+}
+
+void sas_porte_broadcast_rcvd(void *data)
+{
+ unsigned long flags;
+ u32 prim;
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_BROADCAST_RCVD, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ spin_lock_irqsave(&phy->sas_prim_lock, flags);
+ prim = phy->sas_prim;
+ spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
+
+ SAS_DPRINTK("broadcast received: %d\n", prim);
+ sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
+}
+
+void sas_porte_link_reset_err(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+void sas_porte_timer_event(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+void sas_porte_hard_reset(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+/* ---------- SAS port registration ---------- */
+
+static void sas_init_port(struct asd_sas_port *port,
+ struct sas_ha_struct *sas_ha, int i)
+{
+ port->id = i;
+ INIT_LIST_HEAD(&port->dev_list);
+ spin_lock_init(&port->phy_list_lock);
+ INIT_LIST_HEAD(&port->phy_list);
+ port->num_phys = 0;
+ port->phy_mask = 0;
+ port->ha = sas_ha;
+
+ spin_lock_init(&port->dev_list_lock);
+}
+
+int sas_register_ports(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ /* initialize the ports and discovery */
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ struct asd_sas_port *port = sas_ha->sas_port[i];
+
+ sas_init_port(port, sas_ha, i);
+ sas_init_disc(&port->disc, port);
+ }
+ return 0;
+}
+
+void sas_unregister_ports(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ for (i = 0; i < sas_ha->num_phys; i++)
+ if (sas_ha->sas_phy[i]->port)
+ sas_deform_port(sas_ha->sas_phy[i]);
+
+}