drivers/net/usb/kalmia.c - kernel/msm-4.9 - Gitiles

 /*
  * USB network interface driver for Samsung Kalmia based LTE USB modem like the
  * Samsung GT-B3730 and GT-B3710.
  *
  * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com>
  *
  * Sponsored by Quicklink Video Distribution Services Ltd.
  *
  * Based on the cdc_eem module.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */

 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/ctype.h>
 #include <linux/ethtool.h>
 #include <linux/workqueue.h>
 #include <linux/mii.h>
 #include <linux/usb.h>
 #include <linux/crc32.h>
 #include <linux/usb/cdc.h>
 #include <linux/usb/usbnet.h>
 #include <linux/gfp.h>

 /*
  * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
  * handled by the "option" module and an ethernet data port handled by this
  * module.
  *
  * The stick must first be switched into modem mode by usb_modeswitch
  * or similar tool. Then the modem gets sent two initialization packets by
  * this module, which gives the MAC address of the device. User space can then
  * connect the modem using AT commands through the ACM port and then use
  * DHCP on the network interface exposed by this module. Network packets are
  * sent to and from the modem in a proprietary format discovered after watching
  * the behavior of the windows driver for the modem.
  *
  * More information about the use of the modem is available in usb_modeswitch
  * forum and the project page:
  *
  * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
  * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver
  */

 /* #define	DEBUG */
 /* #define	VERBOSE */

 #define KALMIA_HEADER_LENGTH 6
 #define KALMIA_ALIGN_SIZE 4
 #define KALMIA_USB_TIMEOUT 10000

 /*-------------------------------------------------------------------------*/

 static int
 kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
 	u8 *buffer, u8 expected_len)
 {
 	int act_len;
 	int status;

 	netdev_dbg(dev->net, "Sending init packet");

 	status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02),
 		init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT);
 	if (status != 0) {
 		netdev_err(dev->net,
 			"Error sending init packet. Status %i, length %i\n",
 			status, act_len);
 		return status;
 	}
 	else if (act_len != init_msg_len) {
 		netdev_err(dev->net,
 			"Did not send all of init packet. Bytes sent: %i",
 			act_len);
 	}
 	else {
 		netdev_dbg(dev->net, "Successfully sent init packet.");
 	}

 	status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81),
 		buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT);

 	if (status != 0)
 		netdev_err(dev->net,
 			"Error receiving init result. Status %i, length %i\n",
 			status, act_len);
 	else if (act_len != expected_len)
 		netdev_err(dev->net, "Unexpected init result length: %i\n",
 			act_len);

 	return status;
 }

 static int
 kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
 {
 	static const char init_msg_1[] =
 		{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
 		0x00, 0x00 };
 	static const char init_msg_2[] =
 		{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
 		0x00, 0x00 };
 	static const int buflen = 28;
 	char *usb_buf;
 	int status;

 	usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL);
 	if (!usb_buf)
 		return -ENOMEM;

 	memcpy(usb_buf, init_msg_1, 12);
 	status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
 		/ sizeof(init_msg_1[0]), usb_buf, 24);
 	if (status != 0)
 		return status;

 	memcpy(usb_buf, init_msg_2, 12);
 	status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
 		/ sizeof(init_msg_2[0]), usb_buf, 28);
 	if (status != 0)
 		return status;

 	memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);

 	kfree(usb_buf);
 	return status;
 }

 static int
 kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int status;
 	u8 ethernet_addr[ETH_ALEN];

 	/* Don't bind to AT command interface */
 	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
 		return -EINVAL;

 	dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK);
 	dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK);
 	dev->status = NULL;

 	dev->net->hard_header_len += KALMIA_HEADER_LENGTH;
 	dev->hard_mtu = 1400;
 	dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing

 	status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);

 	if (status) {
 		usb_set_intfdata(intf, NULL);
 		usb_driver_release_interface(driver_of(intf), intf);
 		return status;
 	}

 	memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN);

 	return status;
 }

 static struct sk_buff *
 kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
 {
 	struct sk_buff *skb2 = NULL;
 	u16 content_len;
 	unsigned char *header_start;
 	unsigned char ether_type_1, ether_type_2;
 	u8 remainder, padlen = 0;

 	if (!skb_cloned(skb)) {
 		int headroom = skb_headroom(skb);
 		int tailroom = skb_tailroom(skb);

 		if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom
 			>= KALMIA_HEADER_LENGTH))
 			goto done;

 		if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH
 			+ KALMIA_ALIGN_SIZE)) {
 			skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH,
 				skb->data, skb->len);
 			skb_set_tail_pointer(skb, skb->len);
 			goto done;
 		}
 	}

 	skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH,
 		KALMIA_ALIGN_SIZE, flags);
 	if (!skb2)
 		return NULL;

 	dev_kfree_skb_any(skb);
 	skb = skb2;

 done:
 	header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
 	ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
 	ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];

 	netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1,
 		ether_type_2);

 	/* According to empiric data for data packages */
 	header_start[0] = 0x57;
 	header_start[1] = 0x44;
 	content_len = skb->len - KALMIA_HEADER_LENGTH;

 	put_unaligned_le16(content_len, &header_start[2]);
 	header_start[4] = ether_type_1;
 	header_start[5] = ether_type_2;

 	/* Align to 4 bytes by padding with zeros */
 	remainder = skb->len % KALMIA_ALIGN_SIZE;
 	if (remainder > 0) {
 		padlen = KALMIA_ALIGN_SIZE - remainder;
 		memset(skb_put(skb, padlen), 0, padlen);
 	}

 	netdev_dbg(dev->net,
 		"Sending package with length %i and padding %i. Header: %6phC.",
 		content_len, padlen, header_start);

 	return skb;
 }

 static int
 kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 {
 	/*
 	 * Our task here is to strip off framing, leaving skb with one
 	 * data frame for the usbnet framework code to process.
 	 */
 	static const u8 HEADER_END_OF_USB_PACKET[] =
 		{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
 	static const u8 EXPECTED_UNKNOWN_HEADER_1[] =
 		{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
 	static const u8 EXPECTED_UNKNOWN_HEADER_2[] =
 		{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
 	int i = 0;

 	/* incomplete header? */
 	if (skb->len < KALMIA_HEADER_LENGTH)
 		return 0;

 	do {
 		struct sk_buff *skb2 = NULL;
 		u8 *header_start;
 		u16 usb_packet_length, ether_packet_length;
 		int is_last;

 		header_start = skb->data;

 		if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) {
 			if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
 				sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp(
 				header_start, EXPECTED_UNKNOWN_HEADER_2,
 				sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
 				netdev_dbg(dev->net,
 					"Received expected unknown frame header: %6phC. Package length: %i\n",
 					header_start,
 					skb->len - KALMIA_HEADER_LENGTH);
 			}
 			else {
 				netdev_err(dev->net,
 					"Received unknown frame header: %6phC. Package length: %i\n",
 					header_start,
 					skb->len - KALMIA_HEADER_LENGTH);
 				return 0;
 			}
 		}
 		else
 			netdev_dbg(dev->net,
 				"Received header: %6phC. Package length: %i\n",
 				header_start, skb->len - KALMIA_HEADER_LENGTH);

 		/* subtract start header and end header */
 		usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
 		ether_packet_length = get_unaligned_le16(&header_start[2]);
 		skb_pull(skb, KALMIA_HEADER_LENGTH);

 		/* Some small packets misses end marker */
 		if (usb_packet_length < ether_packet_length) {
 			ether_packet_length = usb_packet_length
 				+ KALMIA_HEADER_LENGTH;
 			is_last = true;
 		}
 		else {
 			netdev_dbg(dev->net, "Correct package length #%i", i
 				+ 1);

 			is_last = (memcmp(skb->data + ether_packet_length,
 				HEADER_END_OF_USB_PACKET,
 				sizeof(HEADER_END_OF_USB_PACKET)) == 0);
 			if (!is_last) {
 				header_start = skb->data + ether_packet_length;
 				netdev_dbg(dev->net,
 					"End header: %6phC. Package length: %i\n",
 					header_start,
 					skb->len - KALMIA_HEADER_LENGTH);
 			}
 		}

 		if (is_last) {
 			skb2 = skb;
 		}
 		else {
 			skb2 = skb_clone(skb, GFP_ATOMIC);
 			if (unlikely(!skb2))
 				return 0;
 		}

 		skb_trim(skb2, ether_packet_length);

 		if (is_last) {
 			return 1;
 		}
 		else {
 			usbnet_skb_return(dev, skb2);
 			skb_pull(skb, ether_packet_length);
 		}

 		i++;
 	}
 	while (skb->len);

 	return 1;
 }

 static const struct driver_info kalmia_info = {
 	.description = "Samsung Kalmia LTE USB dongle",
 	.flags = FLAG_WWAN,
 	.bind = kalmia_bind,
 	.rx_fixup = kalmia_rx_fixup,
 	.tx_fixup = kalmia_tx_fixup
 };

 /*-------------------------------------------------------------------------*/

 static const struct usb_device_id products[] = {
 	/* The unswitched USB ID, to get the module auto loaded: */
 	{ USB_DEVICE(0x04e8, 0x689a) },
 	/* The stick swithed into modem (by e.g. usb_modeswitch): */
 	{ USB_DEVICE(0x04e8, 0x6889),
 		.driver_info = (unsigned long) &kalmia_info, },
 	{ /* EMPTY == end of list */} };
 MODULE_DEVICE_TABLE( usb, products);

 static struct usb_driver kalmia_driver = {
 	.name = "kalmia",
 	.id_table = products,
 	.probe = usbnet_probe,
 	.disconnect = usbnet_disconnect,
 	.suspend = usbnet_suspend,
 	.resume = usbnet_resume,
 	.disable_hub_initiated_lpm = 1,
 };

 module_usb_driver(kalmia_driver);

 MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>");
 MODULE_DESCRIPTION("Samsung Kalmia USB network driver");
 MODULE_LICENSE("GPL");
	/*
	* USB network interface driver for Samsung Kalmia based LTE USB modem like the
	* Samsung GT-B3730 and GT-B3710.
	*
	* Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com>
	*
	* Sponsored by Quicklink Video Distribution Services Ltd.
	*
	* Based on the cdc_eem module.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/

	#include <linux/module.h>
	#include <linux/netdevice.h>
	#include <linux/etherdevice.h>
	#include <linux/ctype.h>
	#include <linux/ethtool.h>
	#include <linux/workqueue.h>
	#include <linux/mii.h>
	#include <linux/usb.h>
	#include <linux/crc32.h>
	#include <linux/usb/cdc.h>
	#include <linux/usb/usbnet.h>
	#include <linux/gfp.h>

	/*
	* The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
	* handled by the "option" module and an ethernet data port handled by this
	* module.
	*
	* The stick must first be switched into modem mode by usb_modeswitch
	* or similar tool. Then the modem gets sent two initialization packets by
	* this module, which gives the MAC address of the device. User space can then
	* connect the modem using AT commands through the ACM port and then use
	* DHCP on the network interface exposed by this module. Network packets are
	* sent to and from the modem in a proprietary format discovered after watching
	* the behavior of the windows driver for the modem.
	*
	* More information about the use of the modem is available in usb_modeswitch
	* forum and the project page:
	*
	* http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
	* https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver
	*/

	/* #define DEBUG */
	/* #define VERBOSE */

	#define KALMIA_HEADER_LENGTH 6
	#define KALMIA_ALIGN_SIZE 4
	#define KALMIA_USB_TIMEOUT 10000

	/-------------------------------------------------------------------------/

	static int
	kalmia_send_init_packet(struct usbnet dev, u8 init_msg, u8 init_msg_len,
	u8 *buffer, u8 expected_len)
	{
	int act_len;
	int status;

	netdev_dbg(dev->net, "Sending init packet");

	status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02),
	init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT);
	if (status != 0) {
	netdev_err(dev->net,
	"Error sending init packet. Status %i, length %i\n",
	status, act_len);
	return status;
	}
	else if (act_len != init_msg_len) {
	netdev_err(dev->net,
	"Did not send all of init packet. Bytes sent: %i",
	act_len);
	}
	else {
	netdev_dbg(dev->net, "Successfully sent init packet.");
	}

	status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81),
	buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT);

	if (status != 0)
	netdev_err(dev->net,
	"Error receiving init result. Status %i, length %i\n",
	status, act_len);
	else if (act_len != expected_len)
	netdev_err(dev->net, "Unexpected init result length: %i\n",
	act_len);

	return status;
	}

	static int
	kalmia_init_and_get_ethernet_addr(struct usbnet dev, u8 ethernet_addr)
	{
	static const char init_msg_1[] =
	{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
	0x00, 0x00 };
	static const char init_msg_2[] =
	{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
	0x00, 0x00 };
	static const int buflen = 28;
	char *usb_buf;
	int status;

	usb_buf = kmalloc(buflen, GFP_DMA \| GFP_KERNEL);
	if (!usb_buf)
	return -ENOMEM;

	memcpy(usb_buf, init_msg_1, 12);
	status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
	/ sizeof(init_msg_1[0]), usb_buf, 24);
	if (status != 0)
	return status;

	memcpy(usb_buf, init_msg_2, 12);
	status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
	/ sizeof(init_msg_2[0]), usb_buf, 28);
	if (status != 0)
	return status;

	memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);

	kfree(usb_buf);
	return status;
	}

	static int
	kalmia_bind(struct usbnet dev, struct usb_interface intf)
	{
	int status;
	u8 ethernet_addr[ETH_ALEN];

	/* Don't bind to AT command interface */
	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
	return -EINVAL;

	dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK);
	dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK);
	dev->status = NULL;

	dev->net->hard_header_len += KALMIA_HEADER_LENGTH;
	dev->hard_mtu = 1400;
	dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing

	status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);

	if (status) {
	usb_set_intfdata(intf, NULL);
	usb_driver_release_interface(driver_of(intf), intf);
	return status;
	}

	memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN);

	return status;
	}

	static struct sk_buff *
	kalmia_tx_fixup(struct usbnet dev, struct sk_buff skb, gfp_t flags)
	{
	struct sk_buff *skb2 = NULL;
	u16 content_len;
	unsigned char *header_start;
	unsigned char ether_type_1, ether_type_2;
	u8 remainder, padlen = 0;

	if (!skb_cloned(skb)) {
	int headroom = skb_headroom(skb);
	int tailroom = skb_tailroom(skb);

	if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom
	>= KALMIA_HEADER_LENGTH))
	goto done;

	if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH
	+ KALMIA_ALIGN_SIZE)) {
	skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH,
	skb->data, skb->len);
	skb_set_tail_pointer(skb, skb->len);
	goto done;
	}
	}

	skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH,
	KALMIA_ALIGN_SIZE, flags);
	if (!skb2)
	return NULL;

	dev_kfree_skb_any(skb);
	skb = skb2;

	done:
	header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
	ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
	ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];

	netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1,
	ether_type_2);

	/* According to empiric data for data packages */
	header_start[0] = 0x57;
	header_start[1] = 0x44;
	content_len = skb->len - KALMIA_HEADER_LENGTH;

	put_unaligned_le16(content_len, &header_start[2]);
	header_start[4] = ether_type_1;
	header_start[5] = ether_type_2;

	/* Align to 4 bytes by padding with zeros */
	remainder = skb->len % KALMIA_ALIGN_SIZE;
	if (remainder > 0) {
	padlen = KALMIA_ALIGN_SIZE - remainder;
	memset(skb_put(skb, padlen), 0, padlen);
	}

	netdev_dbg(dev->net,
	"Sending package with length %i and padding %i. Header: %6phC.",
	content_len, padlen, header_start);

	return skb;
	}

	static int
	kalmia_rx_fixup(struct usbnet dev, struct sk_buff skb)
	{
	/*
	* Our task here is to strip off framing, leaving skb with one
	* data frame for the usbnet framework code to process.
	*/
	static const u8 HEADER_END_OF_USB_PACKET[] =
	{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
	static const u8 EXPECTED_UNKNOWN_HEADER_1[] =
	{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
	static const u8 EXPECTED_UNKNOWN_HEADER_2[] =
	{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
	int i = 0;

	/* incomplete header? */
	if (skb->len < KALMIA_HEADER_LENGTH)
	return 0;

	do {
	struct sk_buff *skb2 = NULL;
	u8 *header_start;
	u16 usb_packet_length, ether_packet_length;
	int is_last;

	header_start = skb->data;

	if (unlikely(header_start[0] != 0x57 \|\| header_start[1] != 0x44)) {
	if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
	sizeof(EXPECTED_UNKNOWN_HEADER_1)) \|\| !memcmp(
	header_start, EXPECTED_UNKNOWN_HEADER_2,
	sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
	netdev_dbg(dev->net,
	"Received expected unknown frame header: %6phC. Package length: %i\n",
	header_start,
	skb->len - KALMIA_HEADER_LENGTH);
	}
	else {
	netdev_err(dev->net,
	"Received unknown frame header: %6phC. Package length: %i\n",
	header_start,
	skb->len - KALMIA_HEADER_LENGTH);
	return 0;
	}
	}
	else
	netdev_dbg(dev->net,
	"Received header: %6phC. Package length: %i\n",
	header_start, skb->len - KALMIA_HEADER_LENGTH);

	/* subtract start header and end header */
	usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
	ether_packet_length = get_unaligned_le16(&header_start[2]);
	skb_pull(skb, KALMIA_HEADER_LENGTH);

	/* Some small packets misses end marker */
	if (usb_packet_length < ether_packet_length) {
	ether_packet_length = usb_packet_length
	+ KALMIA_HEADER_LENGTH;
	is_last = true;
	}
	else {
	netdev_dbg(dev->net, "Correct package length #%i", i
	+ 1);

	is_last = (memcmp(skb->data + ether_packet_length,
	HEADER_END_OF_USB_PACKET,
	sizeof(HEADER_END_OF_USB_PACKET)) == 0);
	if (!is_last) {
	header_start = skb->data + ether_packet_length;
	netdev_dbg(dev->net,
	"End header: %6phC. Package length: %i\n",
	header_start,
	skb->len - KALMIA_HEADER_LENGTH);
	}
	}

	if (is_last) {
	skb2 = skb;
	}
	else {
	skb2 = skb_clone(skb, GFP_ATOMIC);
	if (unlikely(!skb2))
	return 0;
	}

	skb_trim(skb2, ether_packet_length);

	if (is_last) {
	return 1;
	}
	else {
	usbnet_skb_return(dev, skb2);
	skb_pull(skb, ether_packet_length);
	}

	i++;
	}
	while (skb->len);

	return 1;
	}

	static const struct driver_info kalmia_info = {
	.description = "Samsung Kalmia LTE USB dongle",
	.flags = FLAG_WWAN,
	.bind = kalmia_bind,
	.rx_fixup = kalmia_rx_fixup,
	.tx_fixup = kalmia_tx_fixup
	};

	/-------------------------------------------------------------------------/

	static const struct usb_device_id products[] = {
	/* The unswitched USB ID, to get the module auto loaded: */
	{ USB_DEVICE(0x04e8, 0x689a) },
	/* The stick swithed into modem (by e.g. usb_modeswitch): */
	{ USB_DEVICE(0x04e8, 0x6889),
	.driver_info = (unsigned long) &kalmia_info, },
	{ /* EMPTY == end of list */} };
	MODULE_DEVICE_TABLE( usb, products);

	static struct usb_driver kalmia_driver = {
	.name = "kalmia",
	.id_table = products,
	.probe = usbnet_probe,
	.disconnect = usbnet_disconnect,
	.suspend = usbnet_suspend,
	.resume = usbnet_resume,
	.disable_hub_initiated_lpm = 1,
	};

	module_usb_driver(kalmia_driver);

	MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>");
	MODULE_DESCRIPTION("Samsung Kalmia USB network driver");
	MODULE_LICENSE("GPL");