| /* |
| * "RTT as Real Time Clock" driver for AT91SAM9 SoC family |
| * |
| * (C) 2007 Michel Benoit |
| * |
| * Based on rtc-at91rm9200.c by Rick Bronson |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/time.h> |
| #include <linux/rtc.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioctl.h> |
| #include <linux/slab.h> |
| #include <linux/platform_data/atmel.h> |
| |
| #include <mach/at91_rtt.h> |
| #include <mach/cpu.h> |
| |
| |
| /* |
| * This driver uses two configurable hardware resources that live in the |
| * AT91SAM9 backup power domain (intended to be powered at all times) |
| * to implement the Real Time Clock interfaces |
| * |
| * - A "Real-time Timer" (RTT) counts up in seconds from a base time. |
| * We can't assign the counter value (CRTV) ... but we can reset it. |
| * |
| * - One of the "General Purpose Backup Registers" (GPBRs) holds the |
| * base time, normally an offset from the beginning of the POSIX |
| * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the |
| * local timezone's offset. |
| * |
| * The RTC's value is the RTT counter plus that offset. The RTC's alarm |
| * is likewise a base (ALMV) plus that offset. |
| * |
| * Not all RTTs will be used as RTCs; some systems have multiple RTTs to |
| * choose from, or a "real" RTC module. All systems have multiple GPBR |
| * registers available, likewise usable for more than "RTC" support. |
| */ |
| |
| /* |
| * We store ALARM_DISABLED in ALMV to record that no alarm is set. |
| * It's also the reset value for that field. |
| */ |
| #define ALARM_DISABLED ((u32)~0) |
| |
| |
| struct sam9_rtc { |
| void __iomem *rtt; |
| struct rtc_device *rtcdev; |
| u32 imr; |
| void __iomem *gpbr; |
| int irq; |
| }; |
| |
| #define rtt_readl(rtc, field) \ |
| __raw_readl((rtc)->rtt + AT91_RTT_ ## field) |
| #define rtt_writel(rtc, field, val) \ |
| __raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field) |
| |
| #define gpbr_readl(rtc) \ |
| __raw_readl((rtc)->gpbr) |
| #define gpbr_writel(rtc, val) \ |
| __raw_writel((val), (rtc)->gpbr) |
| |
| /* |
| * Read current time and date in RTC |
| */ |
| static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm) |
| { |
| struct sam9_rtc *rtc = dev_get_drvdata(dev); |
| u32 secs, secs2; |
| u32 offset; |
| |
| /* read current time offset */ |
| offset = gpbr_readl(rtc); |
| if (offset == 0) |
| return -EILSEQ; |
| |
| /* reread the counter to help sync the two clock domains */ |
| secs = rtt_readl(rtc, VR); |
| secs2 = rtt_readl(rtc, VR); |
| if (secs != secs2) |
| secs = rtt_readl(rtc, VR); |
| |
| rtc_time_to_tm(offset + secs, tm); |
| |
| dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime", |
| 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec); |
| |
| return 0; |
| } |
| |
| /* |
| * Set current time and date in RTC |
| */ |
| static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) |
| { |
| struct sam9_rtc *rtc = dev_get_drvdata(dev); |
| int err; |
| u32 offset, alarm, mr; |
| unsigned long secs; |
| |
| dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime", |
| 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec); |
| |
| err = rtc_tm_to_time(tm, &secs); |
| if (err != 0) |
| return err; |
| |
| mr = rtt_readl(rtc, MR); |
| |
| /* disable interrupts */ |
| rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); |
| |
| /* read current time offset */ |
| offset = gpbr_readl(rtc); |
| |
| /* store the new base time in a battery backup register */ |
| secs += 1; |
| gpbr_writel(rtc, secs); |
| |
| /* adjust the alarm time for the new base */ |
| alarm = rtt_readl(rtc, AR); |
| if (alarm != ALARM_DISABLED) { |
| if (offset > secs) { |
| /* time jumped backwards, increase time until alarm */ |
| alarm += (offset - secs); |
| } else if ((alarm + offset) > secs) { |
| /* time jumped forwards, decrease time until alarm */ |
| alarm -= (secs - offset); |
| } else { |
| /* time jumped past the alarm, disable alarm */ |
| alarm = ALARM_DISABLED; |
| mr &= ~AT91_RTT_ALMIEN; |
| } |
| rtt_writel(rtc, AR, alarm); |
| } |
| |
| /* reset the timer, and re-enable interrupts */ |
| rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST); |
| |
| return 0; |
| } |
| |
| static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct sam9_rtc *rtc = dev_get_drvdata(dev); |
| struct rtc_time *tm = &alrm->time; |
| u32 alarm = rtt_readl(rtc, AR); |
| u32 offset; |
| |
| offset = gpbr_readl(rtc); |
| if (offset == 0) |
| return -EILSEQ; |
| |
| memset(alrm, 0, sizeof(*alrm)); |
| if (alarm != ALARM_DISABLED && offset != 0) { |
| rtc_time_to_tm(offset + alarm, tm); |
| |
| dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm", |
| 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec); |
| |
| if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN) |
| alrm->enabled = 1; |
| } |
| |
| return 0; |
| } |
| |
| static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct sam9_rtc *rtc = dev_get_drvdata(dev); |
| struct rtc_time *tm = &alrm->time; |
| unsigned long secs; |
| u32 offset; |
| u32 mr; |
| int err; |
| |
| err = rtc_tm_to_time(tm, &secs); |
| if (err != 0) |
| return err; |
| |
| offset = gpbr_readl(rtc); |
| if (offset == 0) { |
| /* time is not set */ |
| return -EILSEQ; |
| } |
| mr = rtt_readl(rtc, MR); |
| rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN); |
| |
| /* alarm in the past? finish and leave disabled */ |
| if (secs <= offset) { |
| rtt_writel(rtc, AR, ALARM_DISABLED); |
| return 0; |
| } |
| |
| /* else set alarm and maybe enable it */ |
| rtt_writel(rtc, AR, secs - offset); |
| if (alrm->enabled) |
| rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN); |
| |
| dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm", |
| tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour, |
| tm->tm_min, tm->tm_sec); |
| |
| return 0; |
| } |
| |
| static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| struct sam9_rtc *rtc = dev_get_drvdata(dev); |
| u32 mr = rtt_readl(rtc, MR); |
| |
| dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr); |
| if (enabled) |
| rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN); |
| else |
| rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN); |
| return 0; |
| } |
| |
| /* |
| * Provide additional RTC information in /proc/driver/rtc |
| */ |
| static int at91_rtc_proc(struct device *dev, struct seq_file *seq) |
| { |
| struct sam9_rtc *rtc = dev_get_drvdata(dev); |
| u32 mr = mr = rtt_readl(rtc, MR); |
| |
| seq_printf(seq, "update_IRQ\t: %s\n", |
| (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no"); |
| return 0; |
| } |
| |
| /* |
| * IRQ handler for the RTC |
| */ |
| static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc) |
| { |
| struct sam9_rtc *rtc = _rtc; |
| u32 sr, mr; |
| unsigned long events = 0; |
| |
| /* Shared interrupt may be for another device. Note: reading |
| * SR clears it, so we must only read it in this irq handler! |
| */ |
| mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); |
| sr = rtt_readl(rtc, SR) & (mr >> 16); |
| if (!sr) |
| return IRQ_NONE; |
| |
| /* alarm status */ |
| if (sr & AT91_RTT_ALMS) |
| events |= (RTC_AF | RTC_IRQF); |
| |
| /* timer update/increment */ |
| if (sr & AT91_RTT_RTTINC) |
| events |= (RTC_UF | RTC_IRQF); |
| |
| rtc_update_irq(rtc->rtcdev, 1, events); |
| |
| pr_debug("%s: num=%ld, events=0x%02lx\n", __func__, |
| events >> 8, events & 0x000000FF); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct rtc_class_ops at91_rtc_ops = { |
| .read_time = at91_rtc_readtime, |
| .set_time = at91_rtc_settime, |
| .read_alarm = at91_rtc_readalarm, |
| .set_alarm = at91_rtc_setalarm, |
| .proc = at91_rtc_proc, |
| .alarm_irq_enable = at91_rtc_alarm_irq_enable, |
| }; |
| |
| /* |
| * Initialize and install RTC driver |
| */ |
| static int __devinit at91_rtc_probe(struct platform_device *pdev) |
| { |
| struct resource *r, *r_gpbr; |
| struct sam9_rtc *rtc; |
| int ret, irq; |
| u32 mr; |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| r_gpbr = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!r || !r_gpbr) { |
| dev_err(&pdev->dev, "need 2 ressources\n"); |
| return -ENODEV; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "failed to get interrupt resource\n"); |
| return irq; |
| } |
| |
| rtc = kzalloc(sizeof *rtc, GFP_KERNEL); |
| if (!rtc) |
| return -ENOMEM; |
| |
| rtc->irq = irq; |
| |
| /* platform setup code should have handled this; sigh */ |
| if (!device_can_wakeup(&pdev->dev)) |
| device_init_wakeup(&pdev->dev, 1); |
| |
| platform_set_drvdata(pdev, rtc); |
| rtc->rtt = ioremap(r->start, resource_size(r)); |
| if (!rtc->rtt) { |
| dev_err(&pdev->dev, "failed to map registers, aborting.\n"); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| rtc->gpbr = ioremap(r_gpbr->start, resource_size(r_gpbr)); |
| if (!rtc->gpbr) { |
| dev_err(&pdev->dev, "failed to map gpbr registers, aborting.\n"); |
| ret = -ENOMEM; |
| goto fail_gpbr; |
| } |
| |
| mr = rtt_readl(rtc, MR); |
| |
| /* unless RTT is counting at 1 Hz, re-initialize it */ |
| if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) { |
| mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES); |
| gpbr_writel(rtc, 0); |
| } |
| |
| /* disable all interrupts (same as on shutdown path) */ |
| mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); |
| rtt_writel(rtc, MR, mr); |
| |
| rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev, |
| &at91_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc->rtcdev)) { |
| ret = PTR_ERR(rtc->rtcdev); |
| goto fail_register; |
| } |
| |
| /* register irq handler after we know what name we'll use */ |
| ret = request_irq(rtc->irq, at91_rtc_interrupt, IRQF_SHARED, |
| dev_name(&rtc->rtcdev->dev), rtc); |
| if (ret) { |
| dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq); |
| rtc_device_unregister(rtc->rtcdev); |
| goto fail_register; |
| } |
| |
| /* NOTE: sam9260 rev A silicon has a ROM bug which resets the |
| * RTT on at least some reboots. If you have that chip, you must |
| * initialize the time from some external source like a GPS, wall |
| * clock, discrete RTC, etc |
| */ |
| |
| if (gpbr_readl(rtc) == 0) |
| dev_warn(&pdev->dev, "%s: SET TIME!\n", |
| dev_name(&rtc->rtcdev->dev)); |
| |
| return 0; |
| |
| fail_register: |
| iounmap(rtc->gpbr); |
| fail_gpbr: |
| iounmap(rtc->rtt); |
| fail: |
| platform_set_drvdata(pdev, NULL); |
| kfree(rtc); |
| return ret; |
| } |
| |
| /* |
| * Disable and remove the RTC driver |
| */ |
| static int __devexit at91_rtc_remove(struct platform_device *pdev) |
| { |
| struct sam9_rtc *rtc = platform_get_drvdata(pdev); |
| u32 mr = rtt_readl(rtc, MR); |
| |
| /* disable all interrupts */ |
| rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); |
| free_irq(rtc->irq, rtc); |
| |
| rtc_device_unregister(rtc->rtcdev); |
| |
| iounmap(rtc->gpbr); |
| iounmap(rtc->rtt); |
| platform_set_drvdata(pdev, NULL); |
| kfree(rtc); |
| return 0; |
| } |
| |
| static void at91_rtc_shutdown(struct platform_device *pdev) |
| { |
| struct sam9_rtc *rtc = platform_get_drvdata(pdev); |
| u32 mr = rtt_readl(rtc, MR); |
| |
| rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); |
| rtt_writel(rtc, MR, mr & ~rtc->imr); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| /* AT91SAM9 RTC Power management control */ |
| |
| static int at91_rtc_suspend(struct platform_device *pdev, |
| pm_message_t state) |
| { |
| struct sam9_rtc *rtc = platform_get_drvdata(pdev); |
| u32 mr = rtt_readl(rtc, MR); |
| |
| /* |
| * This IRQ is shared with DBGU and other hardware which isn't |
| * necessarily a wakeup event source. |
| */ |
| rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); |
| if (rtc->imr) { |
| if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) { |
| enable_irq_wake(rtc->irq); |
| /* don't let RTTINC cause wakeups */ |
| if (mr & AT91_RTT_RTTINCIEN) |
| rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); |
| } else |
| rtt_writel(rtc, MR, mr & ~rtc->imr); |
| } |
| |
| return 0; |
| } |
| |
| static int at91_rtc_resume(struct platform_device *pdev) |
| { |
| struct sam9_rtc *rtc = platform_get_drvdata(pdev); |
| u32 mr; |
| |
| if (rtc->imr) { |
| if (device_may_wakeup(&pdev->dev)) |
| disable_irq_wake(rtc->irq); |
| mr = rtt_readl(rtc, MR); |
| rtt_writel(rtc, MR, mr | rtc->imr); |
| } |
| |
| return 0; |
| } |
| #else |
| #define at91_rtc_suspend NULL |
| #define at91_rtc_resume NULL |
| #endif |
| |
| static struct platform_driver at91_rtc_driver = { |
| .probe = at91_rtc_probe, |
| .remove = __devexit_p(at91_rtc_remove), |
| .shutdown = at91_rtc_shutdown, |
| .suspend = at91_rtc_suspend, |
| .resume = at91_rtc_resume, |
| .driver = { |
| .name = "rtc-at91sam9", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(at91_rtc_driver); |
| |
| MODULE_AUTHOR("Michel Benoit"); |
| MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x"); |
| MODULE_LICENSE("GPL"); |