| /* Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| |
| #include "skeleton.dtsi" |
| |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/clock/qcom,gcc-sdxpoorwills.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. SDX POORWILLS"; |
| compatible = "qcom,sdxpoorwills"; |
| qcom,msm-id = <334 0x0>; |
| interrupt-parent = <&intc>; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| peripheral2_mem: peripheral2_region@8fd00000 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0x8fd00000 0x300000>; |
| label = "peripheral2_mem"; |
| }; |
| }; |
| |
| cpus { |
| #size-cells = <0>; |
| #address-cells = <1>; |
| |
| CPU0: cpu@0 { |
| device-type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| soc: soc { }; |
| }; |
| |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| intc: interrupt-controller@17800000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x17800000 0x1000>, |
| <0x17802000 0x1000>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <1 13 0xf08>, |
| <1 12 0xf08>, |
| <1 10 0xf08>, |
| <1 11 0xf08>; |
| clock-frequency = <19200000>; |
| }; |
| |
| timer@17820000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x17820000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@17821000 { |
| frame-number = <0>; |
| interrupts = <0 7 0x4>, |
| <0 6 0x4>; |
| reg = <0x17821000 0x1000>, |
| <0x17822000 0x1000>; |
| }; |
| |
| frame@17823000 { |
| frame-number = <1>; |
| interrupts = <0 8 0x4>; |
| reg = <0x17823000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17824000 { |
| frame-number = <2>; |
| interrupts = <0 9 0x4>; |
| reg = <0x17824000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17825000 { |
| frame-number = <3>; |
| interrupts = <0 10 0x4>; |
| reg = <0x17825000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17826000 { |
| frame-number = <4>; |
| interrupts = <0 11 0x4>; |
| reg = <0x17826000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17827000 { |
| frame-number = <5>; |
| interrupts = <0 12 0x4>; |
| reg = <0x17827000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17828000 { |
| frame-number = <6>; |
| interrupts = <0 13 0x4>; |
| reg = <0x17828000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17829000 { |
| frame-number = <7>; |
| interrupts = <0 14 0x4>; |
| reg = <0x17829000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| clock_gcc: qcom,gcc@100000 { |
| compatible = "qcom,dummycc"; |
| clock-output-names = "gcc_clocks"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| clock_cpu: qcom,clock-a7@17810008 { |
| compatible = "qcom,dummycc"; |
| clock-output-names = "cpu_clocks"; |
| #clock-cells = <1>; |
| }; |
| |
| clock_rpmh: qcom,rpmhclk { |
| compatible = "qcom,dummycc"; |
| clock-output-names = "rpmh_clocks"; |
| #clock-cells = <1>; |
| }; |
| |
| blsp1_uart2: serial@831000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x831000 0x200>; |
| interrupts = <0 26 0>; |
| status = "disabled"; |
| clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, |
| <&clock_gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| }; |
| |
| gdsc_usb30: qcom,gdsc@10b004 { |
| compatible = "qcom,gdsc"; |
| regulator-name = "gdsc_usb30"; |
| reg = <0x0010b004 0x4>; |
| status = "ok"; |
| }; |
| |
| gdsc_pcie: qcom,gdsc@137004 { |
| compatible = "qcom,gdsc"; |
| regulator-name = "gdsc_pcie"; |
| reg = <0x00137004 0x4>; |
| status = "ok"; |
| }; |
| |
| qcom,msm-imem@8600000 { |
| compatible = "qcom,msm-imem"; |
| reg = <0x8600000 0x1000>; /* Address and size of IMEM */ |
| ranges = <0x0 0x8600000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| mem_dump_table@10 { |
| compatible = "qcom,msm-imem-mem_dump_table"; |
| reg = <0x10 8>; |
| }; |
| |
| restart_reason@65c { |
| compatible = "qcom,msm-imem-restart_reason"; |
| reg = <0x65c 4>; |
| }; |
| |
| boot_stats@6b0 { |
| compatible = "qcom,msm-imem-boot_stats"; |
| reg = <0x6b0 32>; |
| }; |
| }; |
| |
| restart@4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0x4ab000 0x4>, |
| <0x193d100 0x4>; |
| reg-names = "pshold-base", "tcsr-boot-misc-detect"; |
| }; |
| |
| tsens0: tsens@c222000 { |
| compatible = "qcom,tsens24xx"; |
| reg = <0xc222000 0x4>, |
| <0xc263000 0x1ff>; |
| reg-names = "tsens_srot_physical", |
| "tsens_tm_physical"; |
| interrupts = <0 163 0>, <0 165 0>; |
| interrupt-names = "tsens-upper-lower", "tsens-critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| thermal_zones: thermal-zones { |
| mpm-usr { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&tsens0 0>; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| q6-usr { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&tsens0 1>; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| ctile-usr { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&tsens0 2>; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-usr { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&tsens0 3>; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| mdm-usr { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&tsens0 4>; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| }; |
| |
| }; |
| |
| #include "sdxpoorwills-regulator.dtsi" |
| #include "sdxpoorwills-usb.dtsi" |