[SCSI] aacraid: add user initiated reset
Add the ability for an application to issue a hardware reset to the
adapter via sysfs. Typical uses include restarting the adapter after it
has been flashed. Bumped revision number for the driver and added a
feature to periodically check the adapter's health (check_interval),
update the adapter's concept of time (update_interval) and block
checking/resetting of the adapter (check_reset).
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 9aca57e..d510839 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1021,7 +1021,7 @@
}
-static int _aac_reset_adapter(struct aac_dev *aac)
+static int _aac_reset_adapter(struct aac_dev *aac, int forced)
{
int index, quirks;
int retval;
@@ -1029,25 +1029,32 @@
struct scsi_device *dev;
struct scsi_cmnd *command;
struct scsi_cmnd *command_list;
+ int jafo = 0;
/*
* Assumptions:
- * - host is locked.
+ * - host is locked, unless called by the aacraid thread.
+ * (a matter of convenience, due to legacy issues surrounding
+ * eh_host_adapter_reset).
* - in_reset is asserted, so no new i/o is getting to the
* card.
- * - The card is dead.
+ * - The card is dead, or will be very shortly ;-/ so no new
+ * commands are completing in the interrupt service.
*/
host = aac->scsi_host_ptr;
scsi_block_requests(host);
aac_adapter_disable_int(aac);
- spin_unlock_irq(host->host_lock);
- kthread_stop(aac->thread);
+ if (aac->thread->pid != current->pid) {
+ spin_unlock_irq(host->host_lock);
+ kthread_stop(aac->thread);
+ jafo = 1;
+ }
/*
* If a positive health, means in a known DEAD PANIC
* state and the adapter could be reset to `try again'.
*/
- retval = aac_adapter_restart(aac, aac_adapter_check_health(aac));
+ retval = aac_adapter_restart(aac, forced ? 0 : aac_adapter_check_health(aac));
if (retval)
goto out;
@@ -1104,10 +1111,12 @@
if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT)
if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK)))
goto out;
- aac->thread = kthread_run(aac_command_thread, aac, aac->name);
- if (IS_ERR(aac->thread)) {
- retval = PTR_ERR(aac->thread);
- goto out;
+ if (jafo) {
+ aac->thread = kthread_run(aac_command_thread, aac, aac->name);
+ if (IS_ERR(aac->thread)) {
+ retval = PTR_ERR(aac->thread);
+ goto out;
+ }
}
(void)aac_get_adapter_info(aac);
quirks = aac_get_driver_ident(index)->quirks;
@@ -1150,7 +1159,98 @@
out:
aac->in_reset = 0;
scsi_unblock_requests(host);
- spin_lock_irq(host->host_lock);
+ if (jafo) {
+ spin_lock_irq(host->host_lock);
+ }
+ return retval;
+}
+
+int aac_reset_adapter(struct aac_dev * aac, int forced)
+{
+ unsigned long flagv = 0;
+ int retval;
+ struct Scsi_Host * host;
+
+ if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
+ return -EBUSY;
+
+ if (aac->in_reset) {
+ spin_unlock_irqrestore(&aac->fib_lock, flagv);
+ return -EBUSY;
+ }
+ aac->in_reset = 1;
+ spin_unlock_irqrestore(&aac->fib_lock, flagv);
+
+ /*
+ * Wait for all commands to complete to this specific
+ * target (block maximum 60 seconds). Although not necessary,
+ * it does make us a good storage citizen.
+ */
+ host = aac->scsi_host_ptr;
+ scsi_block_requests(host);
+ if (forced < 2) for (retval = 60; retval; --retval) {
+ struct scsi_device * dev;
+ struct scsi_cmnd * command;
+ int active = 0;
+
+ __shost_for_each_device(dev, host) {
+ spin_lock_irqsave(&dev->list_lock, flagv);
+ list_for_each_entry(command, &dev->cmd_list, list) {
+ if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
+ active++;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&dev->list_lock, flagv);
+ if (active)
+ break;
+
+ }
+ /*
+ * We can exit If all the commands are complete
+ */
+ if (active == 0)
+ break;
+ ssleep(1);
+ }
+
+ /* Quiesce build, flush cache, write through mode */
+ aac_send_shutdown(aac);
+ spin_lock_irqsave(host->host_lock, flagv);
+ retval = _aac_reset_adapter(aac, forced);
+ spin_unlock_irqrestore(host->host_lock, flagv);
+
+ if (retval == -ENODEV) {
+ /* Unwind aac_send_shutdown() IOP_RESET unsupported/disabled */
+ struct fib * fibctx = aac_fib_alloc(aac);
+ if (fibctx) {
+ struct aac_pause *cmd;
+ int status;
+
+ aac_fib_init(fibctx);
+
+ cmd = (struct aac_pause *) fib_data(fibctx);
+
+ cmd->command = cpu_to_le32(VM_ContainerConfig);
+ cmd->type = cpu_to_le32(CT_PAUSE_IO);
+ cmd->timeout = cpu_to_le32(1);
+ cmd->min = cpu_to_le32(1);
+ cmd->noRescan = cpu_to_le32(1);
+ cmd->count = cpu_to_le32(0);
+
+ status = aac_fib_send(ContainerCommand,
+ fibctx,
+ sizeof(struct aac_pause),
+ FsaNormal,
+ -2 /* Timeout silently */, 1,
+ NULL, NULL);
+
+ if (status >= 0)
+ aac_fib_complete(fibctx);
+ aac_fib_free(fibctx);
+ }
+ }
+
return retval;
}
@@ -1270,10 +1370,15 @@
printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
+ if (!check_reset || (aac->supplement_adapter_info.SupportedOptions2 &
+ le32_to_cpu(AAC_OPTION_IGNORE_RESET)))
+ goto out;
host = aac->scsi_host_ptr;
- spin_lock_irqsave(host->host_lock, flagv);
- BlinkLED = _aac_reset_adapter(aac);
- spin_unlock_irqrestore(host->host_lock, flagv);
+ if (aac->thread->pid != current->pid)
+ spin_lock_irqsave(host->host_lock, flagv);
+ BlinkLED = _aac_reset_adapter(aac, 0);
+ if (aac->thread->pid != current->pid)
+ spin_unlock_irqrestore(host->host_lock, flagv);
return BlinkLED;
out:
@@ -1300,6 +1405,9 @@
struct aac_fib_context *fibctx;
unsigned long flags;
DECLARE_WAITQUEUE(wait, current);
+ unsigned long next_jiffies = jiffies + HZ;
+ unsigned long next_check_jiffies = next_jiffies;
+ long difference = HZ;
/*
* We can only have one thread per adapter for AIF's.
@@ -1368,7 +1476,7 @@
cpu_to_le32(AifCmdJobProgress))) {
aac_handle_aif(dev, fib);
}
-
+
time_now = jiffies/HZ;
/*
@@ -1507,11 +1615,79 @@
* There are no more AIF's
*/
spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags);
- schedule();
+
+ /*
+ * Background activity
+ */
+ if ((time_before(next_check_jiffies,next_jiffies))
+ && ((difference = next_check_jiffies - jiffies) <= 0)) {
+ next_check_jiffies = next_jiffies;
+ if (aac_check_health(dev) == 0) {
+ difference = ((long)(unsigned)check_interval)
+ * HZ;
+ next_check_jiffies = jiffies + difference;
+ } else if (!dev->queues)
+ break;
+ }
+ if (!time_before(next_check_jiffies,next_jiffies)
+ && ((difference = next_jiffies - jiffies) <= 0)) {
+ struct timeval now;
+ int ret;
+
+ /* Don't even try to talk to adapter if its sick */
+ ret = aac_check_health(dev);
+ if (!ret && !dev->queues)
+ break;
+ next_check_jiffies = jiffies
+ + ((long)(unsigned)check_interval)
+ * HZ;
+ do_gettimeofday(&now);
+
+ /* Synchronize our watches */
+ if (((1000000 - (1000000 / HZ)) > now.tv_usec)
+ && (now.tv_usec > (1000000 / HZ)))
+ difference = (((1000000 - now.tv_usec) * HZ)
+ + 500000) / 1000000;
+ else if (ret == 0) {
+ struct fib *fibptr;
+
+ if ((fibptr = aac_fib_alloc(dev))) {
+ u32 * info;
+
+ aac_fib_init(fibptr);
+
+ info = (u32 *) fib_data(fibptr);
+ if (now.tv_usec > 500000)
+ ++now.tv_sec;
+
+ *info = cpu_to_le32(now.tv_sec);
+
+ (void)aac_fib_send(SendHostTime,
+ fibptr,
+ sizeof(*info),
+ FsaNormal,
+ 1, 1,
+ NULL,
+ NULL);
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ }
+ difference = (long)(unsigned)update_interval*HZ;
+ } else {
+ /* retry shortly */
+ difference = 10 * HZ;
+ }
+ next_jiffies = jiffies + difference;
+ if (time_before(next_check_jiffies,next_jiffies))
+ difference = next_check_jiffies - jiffies;
+ }
+ if (difference <= 0)
+ difference = 1;
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(difference);
if (kthread_should_stop())
break;
- set_current_state(TASK_INTERRUPTIBLE);
}
if (dev->queues)
remove_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait);