[SCSI] mpt fusion: standardize printks and debug info
Standardize all prints using common MYIOC_s_XXX_FMT macro defined in mptbase.h. Currently the driver uses several different methods to display info, where in some cases the "controller name" generating the printk is not provided.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 4333449..ecaa1d6 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -100,19 +100,25 @@
static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
{
- dsasprintk(ioc, printk(KERN_DEBUG "---- IO UNIT PAGE 0 ------------\n"));
- dsasprintk(ioc, printk(KERN_DEBUG "Handle=0x%X\n",
- le16_to_cpu(phy_data->AttachedDeviceHandle)));
- dsasprintk(ioc, printk(KERN_DEBUG "Controller Handle=0x%X\n",
- le16_to_cpu(phy_data->ControllerDevHandle)));
- dsasprintk(ioc, printk(KERN_DEBUG "Port=0x%X\n", phy_data->Port));
- dsasprintk(ioc, printk(KERN_DEBUG "Port Flags=0x%X\n", phy_data->PortFlags));
- dsasprintk(ioc, printk(KERN_DEBUG "PHY Flags=0x%X\n", phy_data->PhyFlags));
- dsasprintk(ioc, printk(KERN_DEBUG "Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate));
- dsasprintk(ioc, printk(KERN_DEBUG "Controller PHY Device Info=0x%X\n",
- le32_to_cpu(phy_data->ControllerPhyDeviceInfo)));
- dsasprintk(ioc, printk(KERN_DEBUG "DiscoveryStatus=0x%X\n\n",
- le32_to_cpu(phy_data->DiscoveryStatus)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "---- IO UNIT PAGE 0 ------------\n", ioc->name));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
+ ioc->name, le16_to_cpu(phy_data->AttachedDeviceHandle)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Controller Handle=0x%X\n",
+ ioc->name, le16_to_cpu(phy_data->ControllerDevHandle)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port=0x%X\n",
+ ioc->name, phy_data->Port));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port Flags=0x%X\n",
+ ioc->name, phy_data->PortFlags));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Flags=0x%X\n",
+ ioc->name, phy_data->PhyFlags));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
+ ioc->name, phy_data->NegotiatedLinkRate));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Controller PHY Device Info=0x%X\n", ioc->name,
+ le32_to_cpu(phy_data->ControllerPhyDeviceInfo)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DiscoveryStatus=0x%X\n\n",
+ ioc->name, le32_to_cpu(phy_data->DiscoveryStatus)));
}
static void mptsas_print_phy_pg0(MPT_ADAPTER *ioc, SasPhyPage0_t *pg0)
@@ -121,27 +127,41 @@
memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
- dsasprintk(ioc, printk(KERN_DEBUG "---- SAS PHY PAGE 0 ------------\n"));
- dsasprintk(ioc, printk(KERN_DEBUG "Attached Device Handle=0x%X\n",
- le16_to_cpu(pg0->AttachedDevHandle)));
- dsasprintk(ioc, printk(KERN_DEBUG "SAS Address=0x%llX\n",
- (unsigned long long)le64_to_cpu(sas_address)));
- dsasprintk(ioc, printk(KERN_DEBUG "Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier));
- dsasprintk(ioc, printk(KERN_DEBUG "Attached Device Info=0x%X\n",
- le32_to_cpu(pg0->AttachedDeviceInfo)));
- dsasprintk(ioc, printk(KERN_DEBUG "Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate));
- dsasprintk(ioc, printk(KERN_DEBUG "Change Count=0x%X\n", pg0->ChangeCount));
- dsasprintk(ioc, printk(KERN_DEBUG "PHY Info=0x%X\n\n", le32_to_cpu(pg0->PhyInfo)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "---- SAS PHY PAGE 0 ------------\n", ioc->name));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Attached Device Handle=0x%X\n", ioc->name,
+ le16_to_cpu(pg0->AttachedDevHandle)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
+ ioc->name, (unsigned long long)le64_to_cpu(sas_address)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Attached PHY Identifier=0x%X\n", ioc->name,
+ pg0->AttachedPhyIdentifier));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Attached Device Info=0x%X\n",
+ ioc->name, le32_to_cpu(pg0->AttachedDeviceInfo)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
+ ioc->name, pg0->ProgrammedLinkRate));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Change Count=0x%X\n",
+ ioc->name, pg0->ChangeCount));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Info=0x%X\n\n",
+ ioc->name, le32_to_cpu(pg0->PhyInfo)));
}
static void mptsas_print_phy_pg1(MPT_ADAPTER *ioc, SasPhyPage1_t *pg1)
{
- dsasprintk(ioc, printk(KERN_DEBUG "---- SAS PHY PAGE 1 ------------\n"));
- dsasprintk(ioc, printk(KERN_DEBUG "Invalid Dword Count=0x%x\n", pg1->InvalidDwordCount));
- dsasprintk(ioc, printk(KERN_DEBUG "Running Disparity Error Count=0x%x\n",
- pg1->RunningDisparityErrorCount));
- dsasprintk(ioc, printk(KERN_DEBUG "Loss Dword Synch Count=0x%x\n", pg1->LossDwordSynchCount));
- dsasprintk(ioc, printk(KERN_DEBUG "PHY Reset Problem Count=0x%x\n\n", pg1->PhyResetProblemCount));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "---- SAS PHY PAGE 1 ------------\n", ioc->name));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Invalid Dword Count=0x%x\n",
+ ioc->name, pg1->InvalidDwordCount));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Running Disparity Error Count=0x%x\n", ioc->name,
+ pg1->RunningDisparityErrorCount));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Loss Dword Synch Count=0x%x\n", ioc->name,
+ pg1->LossDwordSynchCount));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "PHY Reset Problem Count=0x%x\n\n", ioc->name,
+ pg1->PhyResetProblemCount));
}
static void mptsas_print_device_pg0(MPT_ADAPTER *ioc, SasDevicePage0_t *pg0)
@@ -150,37 +170,53 @@
memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
- dsasprintk(ioc, printk(KERN_DEBUG "---- SAS DEVICE PAGE 0 ---------\n"));
- dsasprintk(ioc, printk(KERN_DEBUG "Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle)));
- dsasprintk(ioc, printk(KERN_DEBUG "Parent Handle=0x%X\n" ,le16_to_cpu(pg0->ParentDevHandle)));
- dsasprintk(ioc, printk(KERN_DEBUG "Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle)));
- dsasprintk(ioc, printk(KERN_DEBUG "Slot=0x%X\n", le16_to_cpu(pg0->Slot)));
- dsasprintk(ioc, printk(KERN_DEBUG "SAS Address=0x%llX\n", (unsigned long long)
- le64_to_cpu(sas_address)));
- dsasprintk(ioc, printk(KERN_DEBUG "Target ID=0x%X\n", pg0->TargetID));
- dsasprintk(ioc, printk(KERN_DEBUG "Bus=0x%X\n", pg0->Bus));
- /* The PhyNum field specifies the PHY number of the parent
- * device this device is linked to
- */
- dsasprintk(ioc, printk(KERN_DEBUG "Parent Phy Num=0x%X\n", pg0->PhyNum));
- dsasprintk(ioc, printk(KERN_DEBUG "Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus)));
- dsasprintk(ioc, printk(KERN_DEBUG "Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo)));
- dsasprintk(ioc, printk(KERN_DEBUG "Flags=0x%X\n", le16_to_cpu(pg0->Flags)));
- dsasprintk(ioc, printk(KERN_DEBUG "Physical Port=0x%X\n\n", pg0->PhysicalPort));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "---- SAS DEVICE PAGE 0 ---------\n", ioc->name));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
+ ioc->name, le16_to_cpu(pg0->DevHandle)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Handle=0x%X\n",
+ ioc->name, le16_to_cpu(pg0->ParentDevHandle)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Enclosure Handle=0x%X\n",
+ ioc->name, le16_to_cpu(pg0->EnclosureHandle)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Slot=0x%X\n",
+ ioc->name, le16_to_cpu(pg0->Slot)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
+ ioc->name, (unsigned long long)le64_to_cpu(sas_address)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Target ID=0x%X\n",
+ ioc->name, pg0->TargetID));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Bus=0x%X\n",
+ ioc->name, pg0->Bus));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Phy Num=0x%X\n",
+ ioc->name, pg0->PhyNum));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Access Status=0x%X\n",
+ ioc->name, le16_to_cpu(pg0->AccessStatus)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Device Info=0x%X\n",
+ ioc->name, le32_to_cpu(pg0->DeviceInfo)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Flags=0x%X\n",
+ ioc->name, le16_to_cpu(pg0->Flags)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n\n",
+ ioc->name, pg0->PhysicalPort));
}
static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1)
{
- dsasprintk(ioc, printk(KERN_DEBUG "---- SAS EXPANDER PAGE 1 ------------\n"));
- dsasprintk(ioc, printk(KERN_DEBUG "Physical Port=0x%X\n", pg1->PhysicalPort));
- dsasprintk(ioc, printk(KERN_DEBUG "PHY Identifier=0x%X\n", pg1->PhyIdentifier));
- dsasprintk(ioc, printk(KERN_DEBUG "Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate));
- dsasprintk(ioc, printk(KERN_DEBUG "Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate));
- dsasprintk(ioc, printk(KERN_DEBUG "Hardware Link Rate=0x%X\n", pg1->HwLinkRate));
- dsasprintk(ioc, printk(KERN_DEBUG "Owner Device Handle=0x%X\n",
- le16_to_cpu(pg1->OwnerDevHandle)));
- dsasprintk(ioc, printk(KERN_DEBUG "Attached Device Handle=0x%X\n\n",
- le16_to_cpu(pg1->AttachedDevHandle)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "---- SAS EXPANDER PAGE 1 ------------\n", ioc->name));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n",
+ ioc->name, pg1->PhysicalPort));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Identifier=0x%X\n",
+ ioc->name, pg1->PhyIdentifier));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
+ ioc->name, pg1->NegotiatedLinkRate));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
+ ioc->name, pg1->ProgrammedLinkRate));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hardware Link Rate=0x%X\n",
+ ioc->name, pg1->HwLinkRate));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Owner Device Handle=0x%X\n",
+ ioc->name, le16_to_cpu(pg1->OwnerDevHandle)));
+ dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Attached Device Handle=0x%X\n\n", ioc->name,
+ le16_to_cpu(pg1->AttachedDevHandle)));
}
static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
@@ -250,8 +286,8 @@
port_info = port_details->port_info;
phy_info = port_info->phy_info;
- dsaswideprintk(ioc, printk(KERN_DEBUG "%s: [%p]: num_phys=%02d "
- "bitmask=0x%016llX\n", __FUNCTION__, port_details,
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d "
+ "bitmask=0x%016llX\n", ioc->name, __FUNCTION__, port_details,
port_details->num_phys, (unsigned long long)
port_details->phy_bitmask));
@@ -278,14 +314,15 @@
{
if (phy_info->port_details) {
phy_info->port_details->rphy = rphy;
- dsaswideprintk(ioc, printk(KERN_DEBUG "sas_rphy_add: rphy=%p\n", rphy));
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_rphy_add: rphy=%p\n",
+ ioc->name, rphy));
}
if (rphy) {
- dsaswideprintk(ioc, dev_printk(KERN_DEBUG,
- &rphy->dev, "add:"));
- dsaswideprintk(ioc, printk(KERN_DEBUG "rphy=%p release=%p\n",
- rphy, rphy->dev.release));
+ dsaswideprintk(ioc, dev_printk(MYIOC_s_DEBUG_FMT,
+ &rphy->dev, "add:", ioc->name));
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rphy=%p release=%p\n",
+ ioc->name, rphy, rphy->dev.release));
}
}
@@ -305,10 +342,10 @@
phy_info->port_details->port = port;
if (port) {
- dsaswideprintk(ioc, dev_printk(KERN_DEBUG,
- &port->dev, "add:"));
- dsaswideprintk(ioc, printk(KERN_DEBUG "port=%p release=%p\n",
- port, port->dev.release));
+ dsaswideprintk(ioc, dev_printk(MYIOC_s_DEBUG_FMT,
+ &port->dev, "add:", ioc->name));
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "port=%p release=%p\n",
+ ioc->name, port, port->dev.release));
}
}
@@ -359,9 +396,9 @@
* Removing a phy from a port, letting the last
* phy be removed by firmware events.
*/
- dsaswideprintk(ioc, printk(KERN_DEBUG
- "%s: [%p]: deleting phy = %d\n",
- __FUNCTION__, port_details, i));
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: [%p]: deleting phy = %d\n",
+ ioc->name, __FUNCTION__, port_details, i));
port_details->num_phys--;
port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
@@ -375,8 +412,8 @@
phy_info = port_info->phy_info;
for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
sas_address = phy_info->attached.sas_address;
- dsaswideprintk(ioc, printk(KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n",
- i, (unsigned long long)sas_address));
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "phy_id=%d sas_address=0x%018llX\n",
+ ioc->name, i, (unsigned long long)sas_address));
if (!sas_address)
continue;
port_details = phy_info->port_details;
@@ -394,9 +431,9 @@
port_details->phy_bitmask |=
(1 << phy_info->phy_id);
phy_info->sas_port_add_phy=1;
- dsaswideprintk(ioc, printk(KERN_DEBUG "\t\tForming port\n\t\t"
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tForming port\n\t\t"
"phy_id=%d sas_address=0x%018llX\n",
- i, (unsigned long long)sas_address));
+ ioc->name, i, (unsigned long long)sas_address));
phy_info->port_details = port_details;
}
@@ -411,9 +448,9 @@
continue;
if (phy_info_cmp->port_details == port_details )
continue;
- dsaswideprintk(ioc, printk(KERN_DEBUG
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"\t\tphy_id=%d sas_address=0x%018llX\n",
- j, (unsigned long long)
+ ioc->name, j, (unsigned long long)
phy_info_cmp->attached.sas_address));
if (phy_info_cmp->port_details) {
port_details->rphy =
@@ -445,15 +482,15 @@
port_details = port_info->phy_info[i].port_details;
if (!port_details)
continue;
- dsaswideprintk(ioc, printk(KERN_DEBUG
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"%s: [%p]: phy_id=%02d num_phys=%02d "
- "bitmask=0x%016llX\n", __FUNCTION__,
+ "bitmask=0x%016llX\n", ioc->name, __FUNCTION__,
port_details, i, port_details->num_phys,
(unsigned long long)port_details->phy_bitmask));
- dsaswideprintk(ioc, printk(KERN_DEBUG"\t\tport = %p rphy=%p\n",
- port_details->port, port_details->rphy));
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n",
+ ioc->name, port_details->port, port_details->rphy));
}
- dsaswideprintk(ioc, printk(KERN_DEBUG"\n"));
+ dsaswideprintk(ioc, printk("\n"));
mutex_unlock(&ioc->sas_topology_mutex);
}
@@ -1129,10 +1166,8 @@
/* process the completed Reply Message Frame */
reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply;
if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) {
- printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
- __FUNCTION__,
- reply->IOCStatus,
- reply->IOCLogInfo);
+ printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
+ ioc->name, __FUNCTION__, reply->IOCStatus, reply->IOCLogInfo);
error = -ENXIO;
goto out_unlock;
}
@@ -1218,16 +1253,16 @@
u64 sas_address = 0;
if (!rsp) {
- printk(KERN_ERR "%s: the smp response space is missing\n",
- __FUNCTION__);
+ printk(MYIOC_s_ERR_FMT "%s: the smp response space is missing\n",
+ ioc->name, __FUNCTION__);
return -EINVAL;
}
/* do we need to support multiple segments? */
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
- printk(KERN_ERR "%s: multiple segments req %u %u, rsp %u %u\n",
- __FUNCTION__, req->bio->bi_vcnt, req->data_len,
- rsp->bio->bi_vcnt, rsp->data_len);
+ printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
+ ioc->name, __FUNCTION__, req->bio->bi_vcnt, req->data_len,
+ rsp->bio->bi_vcnt, rsp->data_len);
return -EINVAL;
}
@@ -1292,7 +1327,7 @@
timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
if (!timeleft) {
- printk(KERN_ERR "%s: smp timeout!\n", __FUNCTION__);
+ printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __FUNCTION__);
/* On timeout reset the board */
mpt_HardResetHandler(ioc, CAN_SLEEP);
ret = -ETIMEDOUT;
@@ -1307,8 +1342,8 @@
memcpy(req->sense, smprep, sizeof(*smprep));
req->sense_len = sizeof(*smprep);
} else {
- printk(KERN_ERR "%s: smp passthru reply failed to be returned\n",
- __FUNCTION__);
+ printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
+ ioc->name, __FUNCTION__);
ret = -ENXIO;
}
unmap:
@@ -1952,12 +1987,12 @@
goto out;
}
mptsas_set_port(ioc, phy_info, port);
- dsaswideprintk(ioc, printk(KERN_DEBUG
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"sas_port_alloc: port=%p dev=%p port_id=%d\n",
- port, dev, port->port_identifier));
+ ioc->name, port, dev, port->port_identifier));
}
- dsaswideprintk(ioc, printk(KERN_DEBUG "sas_port_add_phy: phy_id=%d\n",
- phy_info->phy_id));
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_port_add_phy: phy_id=%d\n",
+ ioc->name, phy_info->phy_id));
sas_port_add_phy(port, phy_info->phy);
phy_info->sas_port_add_phy = 0;
}
@@ -2259,8 +2294,8 @@
expander_sas_address)
continue;
dsaswideprintk(ioc,
- dev_printk(KERN_DEBUG, &port->dev,
- "delete port (%d)\n", port->port_identifier));
+ dev_printk(MYIOC_s_DEBUG_FMT, &port->dev,
+ "delete port (%d)\n", ioc->name, port->port_identifier));
sas_port_delete(port);
mptsas_port_delete(ioc, phy_info->port_details);
}
@@ -2503,7 +2538,7 @@
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
- printk(KERN_WARNING "mptsas: lost hotplug event\n");
+ printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
goto out;
}
@@ -2644,8 +2679,8 @@
printk(MYIOC_s_INFO_FMT
"removing %s device, channel %d, id %d, phy %d\n",
ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
- dev_printk(KERN_DEBUG, &port->dev,
- "delete port (%d)\n", port->port_identifier);
+ dev_printk(MYIOC_s_DEBUG_FMT, &port->dev,
+ "delete port (%d)\n", ioc->name, port->port_identifier);
sas_port_delete(port);
mptsas_port_delete(ioc, phy_info->port_details);
break;
@@ -2686,8 +2721,8 @@
if (!vtarget) {
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __FUNCTION__, __LINE__));
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
break;
}
/*
@@ -2820,7 +2855,7 @@
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
- printk(KERN_WARNING "mptsas: lost hotplug event\n");
+ printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
break;
}
@@ -2879,7 +2914,7 @@
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
- printk(KERN_WARNING "mptsas: lost hotplug event\n");
+ printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
return;
}
@@ -3230,8 +3265,8 @@
error = scsi_add_host(sh, &ioc->pcidev->dev);
if (error) {
- dprintk(ioc, printk(KERN_ERR MYNAM
- "scsi_add_host failed\n"));
+ dprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "scsi_add_host failed\n", ioc->name));
goto out_mptsas_probe;
}