| /* |
| * Watchdog for the 7101 PMU version found in the ALi M1535 chipsets |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/ioport.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/pci.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| #define WATCHDOG_NAME "ALi_M1535" |
| #define PFX WATCHDOG_NAME ": " |
| #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ |
| |
| /* internal variables */ |
| static unsigned long ali_is_open; |
| static char ali_expect_release; |
| static struct pci_dev *ali_pci; |
| static u32 ali_timeout_bits; /* stores the computed timeout */ |
| static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */ |
| |
| /* module parameters */ |
| static int timeout = WATCHDOG_TIMEOUT; |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0<timeout<18000, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| /* |
| * ali_start - start watchdog countdown |
| * |
| * Starts the timer running providing the timer has a counter |
| * configuration set. |
| */ |
| |
| static void ali_start(void) |
| { |
| u32 val; |
| |
| spin_lock(&ali_lock); |
| |
| pci_read_config_dword(ali_pci, 0xCC, &val); |
| val &= ~0x3F; /* Mask count */ |
| val |= (1<<25) | ali_timeout_bits; |
| pci_write_config_dword(ali_pci, 0xCC, val); |
| |
| spin_unlock(&ali_lock); |
| } |
| |
| /* |
| * ali_stop - stop the timer countdown |
| * |
| * Stop the ALi watchdog countdown |
| */ |
| |
| static void ali_stop(void) |
| { |
| u32 val; |
| |
| spin_lock(&ali_lock); |
| |
| pci_read_config_dword(ali_pci, 0xCC, &val); |
| val &= ~0x3F; /* Mask count to zero (disabled) */ |
| val &= ~(1<<25);/* and for safety mask the reset enable */ |
| pci_write_config_dword(ali_pci, 0xCC, val); |
| |
| spin_unlock(&ali_lock); |
| } |
| |
| /* |
| * ali_keepalive - send a keepalive to the watchdog |
| * |
| * Send a keepalive to the timer (actually we restart the timer). |
| */ |
| |
| static void ali_keepalive(void) |
| { |
| ali_start(); |
| } |
| |
| /* |
| * ali_settimer - compute the timer reload value |
| * @t: time in seconds |
| * |
| * Computes the timeout values needed |
| */ |
| |
| static int ali_settimer(int t) |
| { |
| if(t < 0) |
| return -EINVAL; |
| else if(t < 60) |
| ali_timeout_bits = t|(1<<6); |
| else if(t < 3600) |
| ali_timeout_bits = (t/60)|(1<<7); |
| else if(t < 18000) |
| ali_timeout_bits = (t/300)|(1<<6)|(1<<7); |
| else return -EINVAL; |
| |
| timeout = t; |
| return 0; |
| } |
| |
| /* |
| * /dev/watchdog handling |
| */ |
| |
| /* |
| * ali_write - writes to ALi watchdog |
| * @file: file from VFS |
| * @data: user address of data |
| * @len: length of data |
| * @ppos: pointer to the file offset |
| * |
| * Handle a write to the ALi watchdog. Writing to the file pings |
| * the watchdog and resets it. Writing the magic 'V' sequence allows |
| * the next close to turn off the watchdog. |
| */ |
| |
| static ssize_t ali_write(struct file *file, const char __user *data, |
| size_t len, loff_t * ppos) |
| { |
| /* See if we got the magic character 'V' and reload the timer */ |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* note: just in case someone wrote the magic character |
| * five months ago... */ |
| ali_expect_release = 0; |
| |
| /* scan to see whether or not we got the magic character */ |
| for (i = 0; i != len; i++) { |
| char c; |
| if(get_user(c, data+i)) |
| return -EFAULT; |
| if (c == 'V') |
| ali_expect_release = 42; |
| } |
| } |
| |
| /* someone wrote to us, we should reload the timer */ |
| ali_start(); |
| } |
| return len; |
| } |
| |
| /* |
| * ali_ioctl - handle watchdog ioctls |
| * @inode: VFS inode |
| * @file: VFS file pointer |
| * @cmd: ioctl number |
| * @arg: arguments to the ioctl |
| * |
| * Handle the watchdog ioctls supported by the ALi driver. Really |
| * we want an extension to enable irq ack monitoring and the like |
| */ |
| |
| static int ali_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| static struct watchdog_info ident = { |
| .options = WDIOF_KEEPALIVEPING | |
| WDIOF_SETTIMEOUT | |
| WDIOF_MAGICCLOSE, |
| .firmware_version = 0, |
| .identity = "ALi M1535 WatchDog Timer", |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &ident, |
| sizeof (ident)) ? -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| |
| case WDIOC_KEEPALIVE: |
| ali_keepalive(); |
| return 0; |
| |
| case WDIOC_SETOPTIONS: |
| { |
| int new_options, retval = -EINVAL; |
| |
| if (get_user (new_options, p)) |
| return -EFAULT; |
| |
| if (new_options & WDIOS_DISABLECARD) { |
| ali_stop(); |
| retval = 0; |
| } |
| |
| if (new_options & WDIOS_ENABLECARD) { |
| ali_start(); |
| retval = 0; |
| } |
| |
| return retval; |
| } |
| |
| case WDIOC_SETTIMEOUT: |
| { |
| int new_timeout; |
| |
| if (get_user(new_timeout, p)) |
| return -EFAULT; |
| |
| if (ali_settimer(new_timeout)) |
| return -EINVAL; |
| |
| ali_keepalive(); |
| /* Fall */ |
| } |
| |
| case WDIOC_GETTIMEOUT: |
| return put_user(timeout, p); |
| |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| /* |
| * ali_open - handle open of ali watchdog |
| * @inode: inode from VFS |
| * @file: file from VFS |
| * |
| * Open the ALi watchdog device. Ensure only one person opens it |
| * at a time. Also start the watchdog running. |
| */ |
| |
| static int ali_open(struct inode *inode, struct file *file) |
| { |
| /* /dev/watchdog can only be opened once */ |
| if (test_and_set_bit(0, &ali_is_open)) |
| return -EBUSY; |
| |
| /* Activate */ |
| ali_start(); |
| return nonseekable_open(inode, file); |
| } |
| |
| /* |
| * ali_release - close an ALi watchdog |
| * @inode: inode from VFS |
| * @file: file from VFS |
| * |
| * Close the ALi watchdog device. Actual shutdown of the timer |
| * only occurs if the magic sequence has been set. |
| */ |
| |
| static int ali_release(struct inode *inode, struct file *file) |
| { |
| /* |
| * Shut off the timer. |
| */ |
| if (ali_expect_release == 42) { |
| ali_stop(); |
| } else { |
| printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); |
| ali_keepalive(); |
| } |
| clear_bit(0, &ali_is_open); |
| ali_expect_release = 0; |
| return 0; |
| } |
| |
| /* |
| * ali_notify_sys - System down notifier |
| * |
| * Notifier for system down |
| */ |
| |
| |
| static int ali_notify_sys(struct notifier_block *this, unsigned long code, void *unused) |
| { |
| if (code==SYS_DOWN || code==SYS_HALT) { |
| /* Turn the WDT off */ |
| ali_stop(); |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * Data for PCI driver interface |
| * |
| * This data only exists for exporting the supported |
| * PCI ids via MODULE_DEVICE_TABLE. We do not actually |
| * register a pci_driver, because someone else might one day |
| * want to register another driver on the same PCI id. |
| */ |
| |
| static struct pci_device_id ali_pci_tbl[] = { |
| { PCI_VENDOR_ID_AL, 0x1533, PCI_ANY_ID, PCI_ANY_ID,}, |
| { PCI_VENDOR_ID_AL, 0x1535, PCI_ANY_ID, PCI_ANY_ID,}, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, ali_pci_tbl); |
| |
| /* |
| * ali_find_watchdog - find a 1535 and 7101 |
| * |
| * Scans the PCI hardware for a 1535 series bridge and matching 7101 |
| * watchdog device. This may be overtight but it is better to be safe |
| */ |
| |
| static int __init ali_find_watchdog(void) |
| { |
| struct pci_dev *pdev; |
| u32 wdog; |
| |
| /* Check for a 1533/1535 series bridge */ |
| pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1535, NULL); |
| if (pdev == NULL) |
| pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1533, NULL); |
| if (pdev == NULL) |
| return -ENODEV; |
| pci_dev_put(pdev); |
| |
| /* Check for the a 7101 PMU */ |
| pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL); |
| if(pdev == NULL) |
| return -ENODEV; |
| |
| if(pci_enable_device(pdev)) { |
| pci_dev_put(pdev); |
| return -EIO; |
| } |
| |
| ali_pci = pdev; |
| |
| /* |
| * Initialize the timer bits |
| */ |
| pci_read_config_dword(pdev, 0xCC, &wdog); |
| |
| wdog &= ~0x3F; /* Timer bits */ |
| wdog &= ~((1<<27)|(1<<26)|(1<<25)|(1<<24)); /* Issued events */ |
| wdog &= ~((1<<16)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)); /* No monitor bits */ |
| |
| pci_write_config_dword(pdev, 0xCC, wdog); |
| |
| return 0; |
| } |
| |
| /* |
| * Kernel Interfaces |
| */ |
| |
| static const struct file_operations ali_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = ali_write, |
| .ioctl = ali_ioctl, |
| .open = ali_open, |
| .release = ali_release, |
| }; |
| |
| static struct miscdevice ali_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &ali_fops, |
| }; |
| |
| static struct notifier_block ali_notifier = { |
| .notifier_call = ali_notify_sys, |
| }; |
| |
| /* |
| * watchdog_init - module initialiser |
| * |
| * Scan for a suitable watchdog and if so initialize it. Return an error |
| * if we cannot, the error causes the module to unload |
| */ |
| |
| static int __init watchdog_init(void) |
| { |
| int ret; |
| |
| /* Check whether or not the hardware watchdog is there */ |
| if (ali_find_watchdog() != 0) { |
| return -ENODEV; |
| } |
| |
| /* Check that the timeout value is within it's range ; if not reset to the default */ |
| if (timeout < 1 || timeout >= 18000) { |
| timeout = WATCHDOG_TIMEOUT; |
| printk(KERN_INFO PFX "timeout value must be 0<timeout<18000, using %d\n", |
| timeout); |
| } |
| |
| /* Calculate the watchdog's timeout */ |
| ali_settimer(timeout); |
| |
| ret = misc_register(&ali_miscdev); |
| if (ret != 0) { |
| printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, ret); |
| goto out; |
| } |
| |
| ret = register_reboot_notifier(&ali_notifier); |
| if (ret != 0) { |
| printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", |
| ret); |
| goto unreg_miscdev; |
| } |
| |
| printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", |
| timeout, nowayout); |
| |
| out: |
| return ret; |
| unreg_miscdev: |
| misc_deregister(&ali_miscdev); |
| goto out; |
| } |
| |
| /* |
| * watchdog_exit - module de-initialiser |
| * |
| * Called while unloading a successfully installed watchdog module. |
| */ |
| |
| static void __exit watchdog_exit(void) |
| { |
| /* Stop the timer before we leave */ |
| ali_stop(); |
| |
| /* Deregister */ |
| unregister_reboot_notifier(&ali_notifier); |
| misc_deregister(&ali_miscdev); |
| pci_dev_put(ali_pci); |
| } |
| |
| module_init(watchdog_init); |
| module_exit(watchdog_exit); |
| |
| MODULE_AUTHOR("Alan Cox"); |
| MODULE_DESCRIPTION("ALi M1535 PMU Watchdog Timer driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |