diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4883139..5102e87 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -57,8 +57,15 @@
 	  access the SmartMediaCard.
 
 config MTD_NAND_DENALI
-       depends on PCI
+        tristate "Support Denali NAND controller"
+        help
+	  Enable support for the Denali NAND controller.  This should be
+	  combined with either the PCI or platform drivers to provide device
+	  registration.
+
+config MTD_NAND_DENALI_PCI
         tristate "Support Denali NAND controller on Intel Moorestown"
+	depends on PCI && MTD_NAND_DENALI
         help
           Enable the driver for NAND flash on Intel Moorestown, using the
           Denali NAND controller core.
@@ -66,7 +73,7 @@
 config MTD_NAND_DENALI_SCRATCH_REG_ADDR
         hex "Denali NAND size scratch register address"
         default "0xFF108018"
-        depends on MTD_NAND_DENALI
+        depends on MTD_NAND_DENALI_PCI
         help
           Some platforms place the NAND chip size in a scratch register
           because (some versions of) the driver aren't able to automatically
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 2cbd091..96a6171 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -13,6 +13,7 @@
 obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
 obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
 obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
+obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
 obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
 obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB)	+= ppchameleonevb.o
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index e706a23..0c8bb6b 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -16,14 +16,12 @@
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  *
  */
-
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/wait.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
-#include <linux/pci.h>
 #include <linux/mtd/mtd.h>
 #include <linux/module.h>
 
@@ -89,13 +87,6 @@
  * format the bank into the proper bits for the controller */
 #define BANK(x) ((x) << 24)
 
-/* List of platforms this NAND controller has be integrated into */
-static const struct pci_device_id denali_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
-	{ PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
-	{ /* end: all zeroes */ }
-};
-
 /* forward declarations */
 static void clear_interrupts(struct denali_nand_info *denali);
 static uint32_t wait_for_irq(struct denali_nand_info *denali,
@@ -699,7 +690,7 @@
 
 	if (comp_res == 0) {
 		/* timeout */
-		printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
+		pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n",
 				intr_status, irq_mask);
 
 		intr_status = 0;
@@ -1305,8 +1296,7 @@
 		/* TODO: Read OOB data */
 		break;
 	default:
-		printk(KERN_ERR ": unsupported command"
-				" received 0x%x\n", cmd);
+		pr_err(": unsupported command received 0x%x\n", cmd);
 		break;
 	}
 }
@@ -1425,107 +1415,48 @@
 	denali->irq_status = 0;
 }
 
-/* driver entry point */
-static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+int denali_init(struct denali_nand_info *denali)
 {
-	int ret = -ENODEV;
-	resource_size_t csr_base, mem_base;
-	unsigned long csr_len, mem_len;
-	struct denali_nand_info *denali;
+	int ret;
 
-	denali = kzalloc(sizeof(*denali), GFP_KERNEL);
-	if (!denali)
-		return -ENOMEM;
-
-	ret = pci_enable_device(dev);
-	if (ret) {
-		printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
-		goto failed_alloc_memery;
-	}
-
-	if (id->driver_data == INTEL_CE4100) {
+	if (denali->platform == INTEL_CE4100) {
 		/* Due to a silicon limitation, we can only support
 		 * ONFI timing mode 1 and below.
 		 */
 		if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
-			printk(KERN_ERR "Intel CE4100 only supports"
-					" ONFI timing mode 1 or below\n");
-			ret = -EINVAL;
-			goto failed_enable_dev;
-		}
-		denali->platform = INTEL_CE4100;
-		mem_base = pci_resource_start(dev, 0);
-		mem_len = pci_resource_len(dev, 1);
-		csr_base = pci_resource_start(dev, 1);
-		csr_len = pci_resource_len(dev, 1);
-	} else {
-		denali->platform = INTEL_MRST;
-		csr_base = pci_resource_start(dev, 0);
-		csr_len = pci_resource_len(dev, 0);
-		mem_base = pci_resource_start(dev, 1);
-		mem_len = pci_resource_len(dev, 1);
-		if (!mem_len) {
-			mem_base = csr_base + csr_len;
-			mem_len = csr_len;
+			pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n");
+			return -EINVAL;
 		}
 	}
 
 	/* Is 32-bit DMA supported? */
-	ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
+	ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
 	if (ret) {
-		printk(KERN_ERR "Spectra: no usable DMA configuration\n");
-		goto failed_enable_dev;
+		pr_err("Spectra: no usable DMA configuration\n");
+		return ret;
 	}
-	denali->buf.dma_buf = dma_map_single(&dev->dev, denali->buf.buf,
+	denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
 					     DENALI_BUF_SIZE,
 					     DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(&dev->dev, denali->buf.dma_buf)) {
-		dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");
-		goto failed_enable_dev;
+	if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
+		dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
+		return -EIO;
 	}
-
-	pci_set_master(dev);
-	denali->dev = &dev->dev;
-	denali->mtd.dev.parent = &dev->dev;
-
-	ret = pci_request_regions(dev, DENALI_NAND_NAME);
-	if (ret) {
-		printk(KERN_ERR "Spectra: Unable to request memory regions\n");
-		goto failed_dma_map;
-	}
-
-	denali->flash_reg = ioremap_nocache(csr_base, csr_len);
-	if (!denali->flash_reg) {
-		printk(KERN_ERR "Spectra: Unable to remap memory region\n");
-		ret = -ENOMEM;
-		goto failed_req_regions;
-	}
-
-	denali->flash_mem = ioremap_nocache(mem_base, mem_len);
-	if (!denali->flash_mem) {
-		printk(KERN_ERR "Spectra: ioremap_nocache failed!");
-		ret = -ENOMEM;
-		goto failed_remap_reg;
-	}
-
+	denali->mtd.dev.parent = denali->dev;
 	denali_hw_init(denali);
 	denali_drv_init(denali);
 
 	/* denali_isr register is done after all the hardware
 	 * initilization is finished*/
-	if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
+	if (request_irq(denali->irq, denali_isr, IRQF_SHARED,
 			DENALI_NAND_NAME, denali)) {
-		printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
-		ret = -ENODEV;
-		goto failed_remap_mem;
+		pr_err("Spectra: Unable to allocate IRQ\n");
+		return -ENODEV;
 	}
 
 	/* now that our ISR is registered, we can enable interrupts */
 	denali_set_intr_modes(denali, true);
-
-	pci_set_drvdata(dev, denali);
-
 	denali->mtd.name = "denali-nand";
 	denali->mtd.owner = THIS_MODULE;
 	denali->mtd.priv = &denali->nand;
@@ -1549,8 +1480,7 @@
 	 */
 	if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
 		ret = -ENODEV;
-		printk(KERN_ERR "Spectra: device size not supported by this "
-			"version of MTD.");
+		pr_err("Spectra: device size not supported by this version of MTD.");
 		goto failed_req_irq;
 	}
 
@@ -1602,8 +1532,8 @@
 	} else if (denali->mtd.oobsize < (denali->bbtskipbytes +
 			ECC_8BITS * (denali->mtd.writesize /
 			ECC_SECTOR_SIZE))) {
-		printk(KERN_ERR "Your NAND chip OOB is not large enough to"
-				" contain 8bit ECC correction codes");
+		pr_err("Your NAND chip OOB is not large enough to \
+				contain 8bit ECC correction codes");
 		goto failed_req_irq;
 	} else {
 		denali->nand.ecc.strength = 8;
@@ -1655,56 +1585,24 @@
 
 	ret = mtd_device_register(&denali->mtd, NULL, 0);
 	if (ret) {
-		dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n",
+		dev_err(denali->dev, "Spectra: Failed to register MTD: %d\n",
 				ret);
 		goto failed_req_irq;
 	}
 	return 0;
 
 failed_req_irq:
-	denali_irq_cleanup(dev->irq, denali);
-failed_remap_mem:
-	iounmap(denali->flash_mem);
-failed_remap_reg:
-	iounmap(denali->flash_reg);
-failed_req_regions:
-	pci_release_regions(dev);
-failed_dma_map:
-	dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
-			 DMA_BIDIRECTIONAL);
-failed_enable_dev:
-	pci_disable_device(dev);
-failed_alloc_memery:
-	kfree(denali);
+	denali_irq_cleanup(denali->irq, denali);
+
 	return ret;
 }
+EXPORT_SYMBOL(denali_init);
 
 /* driver exit point */
-static void denali_pci_remove(struct pci_dev *dev)
+void denali_remove(struct denali_nand_info *denali)
 {
-	struct denali_nand_info *denali = pci_get_drvdata(dev);
-
-	nand_release(&denali->mtd);
-
-	denali_irq_cleanup(dev->irq, denali);
-
-	iounmap(denali->flash_reg);
-	iounmap(denali->flash_mem);
-	pci_release_regions(dev);
-	pci_disable_device(dev);
-	dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
-			 DMA_BIDIRECTIONAL);
-	pci_set_drvdata(dev, NULL);
-	kfree(denali);
+	denali_irq_cleanup(denali->irq, denali);
+	dma_unmap_single(denali->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+			DMA_BIDIRECTIONAL);
 }
-
-MODULE_DEVICE_TABLE(pci, denali_pci_ids);
-
-static struct pci_driver denali_pci_driver = {
-	.name = DENALI_NAND_NAME,
-	.id_table = denali_pci_ids,
-	.probe = denali_pci_probe,
-	.remove = denali_pci_remove,
-};
-
-module_pci_driver(denali_pci_driver);
+EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index fabb9d5..e5aa995 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -487,6 +487,7 @@
 	uint32_t irq_status;
 	int irq_debug_array[32];
 	int idx;
+	int irq;
 
 	uint32_t devnum;	/* represent how many nands connected */
 	uint32_t fwblks; /* represent how many blocks FW used */
@@ -496,4 +497,7 @@
 	uint32_t max_banks;
 };
 
+extern int denali_init(struct denali_nand_info *denali);
+extern void denali_remove(struct denali_nand_info *denali);
+
 #endif /*_LLD_NAND_*/
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
new file mode 100644
index 0000000..ea074e6
--- /dev/null
+++ b/drivers/mtd/nand/denali_pci.c
@@ -0,0 +1,144 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright © 2009-2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include "denali.h"
+
+#define DENALI_NAND_NAME    "denali-nand-pci"
+
+/* List of platforms this NAND controller has be integrated into */
+static DEFINE_PCI_DEVICE_TABLE(denali_pci_ids) = {
+	{ PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
+	{ PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, denali_pci_ids);
+
+static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int ret = -ENODEV;
+	resource_size_t csr_base, mem_base;
+	unsigned long csr_len, mem_len;
+	struct denali_nand_info *denali;
+
+	denali = kzalloc(sizeof(*denali), GFP_KERNEL);
+	if (!denali)
+		return -ENOMEM;
+
+	ret = pci_enable_device(dev);
+	if (ret) {
+		pr_err("Spectra: pci_enable_device failed.\n");
+		goto failed_alloc_memery;
+	}
+
+	if (id->driver_data == INTEL_CE4100) {
+		denali->platform = INTEL_CE4100;
+		mem_base = pci_resource_start(dev, 0);
+		mem_len = pci_resource_len(dev, 1);
+		csr_base = pci_resource_start(dev, 1);
+		csr_len = pci_resource_len(dev, 1);
+	} else {
+		denali->platform = INTEL_MRST;
+		csr_base = pci_resource_start(dev, 0);
+		csr_len = pci_resource_len(dev, 0);
+		mem_base = pci_resource_start(dev, 1);
+		mem_len = pci_resource_len(dev, 1);
+		if (!mem_len) {
+			mem_base = csr_base + csr_len;
+			mem_len = csr_len;
+		}
+	}
+
+	pci_set_master(dev);
+	denali->dev = &dev->dev;
+	denali->irq = dev->irq;
+
+	ret = pci_request_regions(dev, DENALI_NAND_NAME);
+	if (ret) {
+		pr_err("Spectra: Unable to request memory regions\n");
+		goto failed_enable_dev;
+	}
+
+	denali->flash_reg = ioremap_nocache(csr_base, csr_len);
+	if (!denali->flash_reg) {
+		pr_err("Spectra: Unable to remap memory region\n");
+		ret = -ENOMEM;
+		goto failed_req_regions;
+	}
+
+	denali->flash_mem = ioremap_nocache(mem_base, mem_len);
+	if (!denali->flash_mem) {
+		pr_err("Spectra: ioremap_nocache failed!");
+		ret = -ENOMEM;
+		goto failed_remap_reg;
+	}
+
+	ret = denali_init(denali);
+	if (ret)
+		goto failed_remap_mem;
+
+	pci_set_drvdata(dev, denali);
+
+	return 0;
+
+failed_remap_mem:
+	iounmap(denali->flash_mem);
+failed_remap_reg:
+	iounmap(denali->flash_reg);
+failed_req_regions:
+	pci_release_regions(dev);
+failed_enable_dev:
+	pci_disable_device(dev);
+failed_alloc_memery:
+	kfree(denali);
+
+	return ret;
+}
+
+/* driver exit point */
+static void denali_pci_remove(struct pci_dev *dev)
+{
+	struct denali_nand_info *denali = pci_get_drvdata(dev);
+
+	denali_remove(denali);
+	iounmap(denali->flash_reg);
+	iounmap(denali->flash_mem);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	pci_set_drvdata(dev, NULL);
+	kfree(denali);
+}
+
+static struct pci_driver denali_pci_driver = {
+	.name = DENALI_NAND_NAME,
+	.id_table = denali_pci_ids,
+	.probe = denali_pci_probe,
+	.remove = denali_pci_remove,
+};
+
+static int __devinit denali_init_pci(void)
+{
+	pr_info("Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
+	return pci_register_driver(&denali_pci_driver);
+}
+module_init(denali_init_pci);
+
+static void __devexit denali_exit_pci(void)
+{
+	pci_unregister_driver(&denali_pci_driver);
+}
+module_exit(denali_exit_pci);