omap: Fix spotty MMC voltages
As noted by Michał Mirosław <mirqus@gmail.com>, the voltages should
cover the supported voltage range, or support only one voltage.
As all these boards are using a GPIO to enable the power, chances
are that only 3.3V cards are supported on these boards.
Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index b30c499..f2fc43d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -58,8 +58,7 @@
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 54b0f06..2098525 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -40,8 +40,7 @@
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 7ea75c1..88c97e2 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -410,8 +410,7 @@
.nr_slots = 1,
.switch_slot = NULL,
.slots[0] = {
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
.nomux = 1,
.wires = 4,
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 5b33ae8..e8ddd86 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -44,8 +44,7 @@
.nr_slots = 1,
.slots[0] = {
.set_power = mmc_set_power,
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};