| * Renesas SH-Mobile Serial Communication Interface |
| |
| Required properties: |
| |
| - compatible: Must contain one or more of the following: |
| |
| - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART. |
| - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART. |
| - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. |
| - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. |
| - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. |
| - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART. |
| - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART. |
| - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART. |
| - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART. |
| - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART. |
| - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. |
| - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. |
| - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. |
| - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. |
| - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. |
| - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. |
| - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. |
| - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. |
| - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART. |
| - "renesas,scif-r8a7791" for R8A7791 (R-Car M2-W) SCIF compatible UART. |
| - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART. |
| - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART. |
| - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART. |
| - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART. |
| - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART. |
| - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART. |
| - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART. |
| - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART. |
| - "renesas,hscif-r8a7793" for R8A7793 (R-Car M2-N) HSCIF compatible UART. |
| - "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART. |
| - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART. |
| - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART. |
| - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART. |
| - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART. |
| - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. |
| - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. |
| - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. |
| - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. |
| - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. |
| - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, |
| - "renesas,rcar-gen2-scif" for R-Car Gen2 SCIF compatible UART, |
| - "renesas,rcar-gen3-scif" for R-Car Gen3 SCIF compatible UART, |
| - "renesas,rcar-gen2-scifa" for R-Car Gen2 SCIFA compatible UART, |
| - "renesas,rcar-gen2-scifb" for R-Car Gen2 SCIFB compatible UART, |
| - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART, |
| - "renesas,rcar-gen2-hscif" for R-Car Gen2 HSCIF compatible UART, |
| - "renesas,rcar-gen3-hscif" for R-Car Gen3 HSCIF compatible UART, |
| - "renesas,scif" for generic SCIF compatible UART. |
| - "renesas,scifa" for generic SCIFA compatible UART. |
| - "renesas,scifb" for generic SCIFB compatible UART. |
| - "renesas,hscif" for generic HSCIF compatible UART. |
| - "renesas,sci" for generic SCI compatible UART. |
| |
| When compatible with the generic version, nodes must list the |
| SoC-specific version corresponding to the platform first, followed by the |
| family-specific and/or generic versions. |
| |
| - reg: Base address and length of the I/O registers used by the UART. |
| - interrupts: Must contain an interrupt-specifier for the SCIx interrupt. |
| |
| - clocks: Must contain a phandle and clock-specifier pair for each entry |
| in clock-names. |
| - clock-names: Must contain "fck" for the SCIx UART functional clock. |
| Apart from the divided functional clock, there may be other possible |
| sources for the sampling clock, depending on SCIx variant. |
| On (H)SCI(F) and some SCIFA, an additional clock may be specified: |
| - "hsck" for the optional external clock input (on HSCIF), |
| - "sck" for the optional external clock input (on other variants). |
| On UARTs equipped with a Baud Rate Generator for External Clock (BRG) |
| (some SCIF and HSCIF), additional clocks may be specified: |
| - "brg_int" for the optional internal clock source for the frequency |
| divider (typically the (AXI or SHwy) bus clock), |
| - "scif_clk" for the optional external clock source for the frequency |
| divider (SCIF_CLK). |
| |
| Note: Each enabled SCIx UART should have an alias correctly numbered in the |
| "aliases" node. |
| |
| Optional properties: |
| - dmas: Must contain a list of two references to DMA specifiers, one for |
| transmission, and one for reception. |
| - dma-names: Must contain a list of two DMA names, "tx" and "rx". |
| - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the |
| generic serial DT bindings in serial.txt. |
| - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow |
| control, cfr. the generic serial DT bindings in serial.txt. |
| |
| Example: |
| aliases { |
| serial0 = &scifa0; |
| }; |
| |
| scifa0: serial@e6c40000 { |
| compatible = "renesas,scifa-r8a7790", |
| "renesas,rcar-gen2-scifa", "renesas,scifa"; |
| reg = <0 0xe6c40000 0 64>; |
| interrupt-parent = <&gic>; |
| interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; |
| clock-names = "fck"; |
| dmas = <&dmac0 0x21>, <&dmac0 0x22>; |
| dma-names = "tx", "rx"; |
| }; |