| /***********************license start*************** |
| * Author: Cavium Networks |
| * |
| * Contact: support@caviumnetworks.com |
| * This file is part of the OCTEON SDK |
| * |
| * Copyright (c) 2003-2008 Cavium Networks |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this file; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * or visit http://www.gnu.org/licenses/. |
| * |
| * This file may also be available under a different license from Cavium. |
| * Contact Cavium Networks for more information |
| ***********************license end**************************************/ |
| |
| /* |
| * Functions for RGMII/GMII/MII initialization, configuration, |
| * and monitoring. |
| */ |
| #include <asm/octeon/octeon.h> |
| |
| #include <asm/octeon/cvmx-config.h> |
| |
| #include <asm/octeon/cvmx-pko.h> |
| #include <asm/octeon/cvmx-helper.h> |
| #include <asm/octeon/cvmx-helper-board.h> |
| |
| #include <asm/octeon/cvmx-npi-defs.h> |
| #include <asm/octeon/cvmx-gmxx-defs.h> |
| #include <asm/octeon/cvmx-asxx-defs.h> |
| #include <asm/octeon/cvmx-dbg-defs.h> |
| |
| void __cvmx_interrupt_gmxx_enable(int interface); |
| void __cvmx_interrupt_asxx_enable(int block); |
| |
| /** |
| * Probe RGMII ports and determine the number present |
| * |
| * @interface: Interface to probe |
| * |
| * Returns Number of RGMII/GMII/MII ports (0-4). |
| */ |
| int __cvmx_helper_rgmii_probe(int interface) |
| { |
| int num_ports = 0; |
| union cvmx_gmxx_inf_mode mode; |
| mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); |
| |
| if (mode.s.type) { |
| if (OCTEON_IS_MODEL(OCTEON_CN38XX) |
| || OCTEON_IS_MODEL(OCTEON_CN58XX)) { |
| cvmx_dprintf("ERROR: RGMII initialize called in " |
| "SPI interface\n"); |
| } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) |
| || OCTEON_IS_MODEL(OCTEON_CN30XX) |
| || OCTEON_IS_MODEL(OCTEON_CN50XX)) { |
| /* |
| * On these chips "type" says we're in |
| * GMII/MII mode. This limits us to 2 ports |
| */ |
| num_ports = 2; |
| } else { |
| cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", |
| __func__); |
| } |
| } else { |
| if (OCTEON_IS_MODEL(OCTEON_CN38XX) |
| || OCTEON_IS_MODEL(OCTEON_CN58XX)) { |
| num_ports = 4; |
| } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) |
| || OCTEON_IS_MODEL(OCTEON_CN30XX) |
| || OCTEON_IS_MODEL(OCTEON_CN50XX)) { |
| num_ports = 3; |
| } else { |
| cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", |
| __func__); |
| } |
| } |
| return num_ports; |
| } |
| |
| /** |
| * Put an RGMII interface in loopback mode. Internal packets sent |
| * out will be received back again on the same port. Externally |
| * received packets will echo back out. |
| * |
| * @port: IPD port number to loop. |
| */ |
| void cvmx_helper_rgmii_internal_loopback(int port) |
| { |
| int interface = (port >> 4) & 1; |
| int index = port & 0xf; |
| uint64_t tmp; |
| |
| union cvmx_gmxx_prtx_cfg gmx_cfg; |
| gmx_cfg.u64 = 0; |
| gmx_cfg.s.duplex = 1; |
| gmx_cfg.s.slottime = 1; |
| gmx_cfg.s.speed = 1; |
| cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); |
| cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); |
| cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); |
| tmp = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); |
| cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), (1 << index) | tmp); |
| tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface)); |
| cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), (1 << index) | tmp); |
| tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)); |
| cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), (1 << index) | tmp); |
| gmx_cfg.s.en = 1; |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); |
| } |
| |
| /** |
| * Workaround ASX setup errata with CN38XX pass1 |
| * |
| * @interface: Interface to setup |
| * @port: Port to setup (0..3) |
| * @cpu_clock_hz: |
| * Chip frequency in Hertz |
| * |
| * Returns Zero on success, negative on failure |
| */ |
| static int __cvmx_helper_errata_asx_pass1(int interface, int port, |
| int cpu_clock_hz) |
| { |
| /* Set hi water mark as per errata GMX-4 */ |
| if (cpu_clock_hz >= 325000000 && cpu_clock_hz < 375000000) |
| cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 12); |
| else if (cpu_clock_hz >= 375000000 && cpu_clock_hz < 437000000) |
| cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 11); |
| else if (cpu_clock_hz >= 437000000 && cpu_clock_hz < 550000000) |
| cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 10); |
| else if (cpu_clock_hz >= 550000000 && cpu_clock_hz < 687000000) |
| cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 9); |
| else |
| cvmx_dprintf("Illegal clock frequency (%d). " |
| "CVMX_ASXX_TX_HI_WATERX not set\n", cpu_clock_hz); |
| return 0; |
| } |
| |
| /** |
| * Configure all of the ASX, GMX, and PKO regsiters required |
| * to get RGMII to function on the supplied interface. |
| * |
| * @interface: PKO Interface to configure (0 or 1) |
| * |
| * Returns Zero on success |
| */ |
| int __cvmx_helper_rgmii_enable(int interface) |
| { |
| int num_ports = cvmx_helper_ports_on_interface(interface); |
| int port; |
| struct cvmx_sysinfo *sys_info_ptr = cvmx_sysinfo_get(); |
| union cvmx_gmxx_inf_mode mode; |
| union cvmx_asxx_tx_prt_en asx_tx; |
| union cvmx_asxx_rx_prt_en asx_rx; |
| |
| mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); |
| |
| if (mode.s.en == 0) |
| return -1; |
| if ((OCTEON_IS_MODEL(OCTEON_CN38XX) || |
| OCTEON_IS_MODEL(OCTEON_CN58XX)) && mode.s.type == 1) |
| /* Ignore SPI interfaces */ |
| return -1; |
| |
| /* Configure the ASX registers needed to use the RGMII ports */ |
| asx_tx.u64 = 0; |
| asx_tx.s.prt_en = cvmx_build_mask(num_ports); |
| cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), asx_tx.u64); |
| |
| asx_rx.u64 = 0; |
| asx_rx.s.prt_en = cvmx_build_mask(num_ports); |
| cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), asx_rx.u64); |
| |
| /* Configure the GMX registers needed to use the RGMII ports */ |
| for (port = 0; port < num_ports; port++) { |
| /* Setting of CVMX_GMXX_TXX_THRESH has been moved to |
| __cvmx_helper_setup_gmx() */ |
| |
| if (cvmx_octeon_is_pass1()) |
| __cvmx_helper_errata_asx_pass1(interface, port, |
| sys_info_ptr-> |
| cpu_clock_hz); |
| else { |
| /* |
| * Configure more flexible RGMII preamble |
| * checking. Pass 1 doesn't support this |
| * feature. |
| */ |
| union cvmx_gmxx_rxx_frm_ctl frm_ctl; |
| frm_ctl.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL |
| (port, interface)); |
| /* New field, so must be compile time */ |
| frm_ctl.s.pre_free = 1; |
| cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(port, interface), |
| frm_ctl.u64); |
| } |
| |
| /* |
| * Each pause frame transmitted will ask for about 10M |
| * bit times before resume. If buffer space comes |
| * available before that time has expired, an XON |
| * pause frame (0 time) will be transmitted to restart |
| * the flow. |
| */ |
| cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_TIME(port, interface), |
| 20000); |
| cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_INTERVAL |
| (port, interface), 19000); |
| |
| if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { |
| cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), |
| 16); |
| cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), |
| 16); |
| } else { |
| cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), |
| 24); |
| cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), |
| 24); |
| } |
| } |
| |
| __cvmx_helper_setup_gmx(interface, num_ports); |
| |
| /* enable the ports now */ |
| for (port = 0; port < num_ports; port++) { |
| union cvmx_gmxx_prtx_cfg gmx_cfg; |
| |
| gmx_cfg.u64 = |
| cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface)); |
| gmx_cfg.s.en = 1; |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(port, interface), |
| gmx_cfg.u64); |
| } |
| __cvmx_interrupt_asxx_enable(interface); |
| __cvmx_interrupt_gmxx_enable(interface); |
| |
| return 0; |
| } |
| |
| /** |
| * Return the link state of an IPD/PKO port as returned by |
| * auto negotiation. The result of this function may not match |
| * Octeon's link config if auto negotiation has changed since |
| * the last call to cvmx_helper_link_set(). |
| * |
| * @ipd_port: IPD/PKO port to query |
| * |
| * Returns Link state |
| */ |
| cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port) |
| { |
| int interface = cvmx_helper_get_interface_num(ipd_port); |
| int index = cvmx_helper_get_interface_index_num(ipd_port); |
| union cvmx_asxx_prt_loop asxx_prt_loop; |
| |
| asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); |
| if (asxx_prt_loop.s.int_loop & (1 << index)) { |
| /* Force 1Gbps full duplex on internal loopback */ |
| cvmx_helper_link_info_t result; |
| result.u64 = 0; |
| result.s.full_duplex = 1; |
| result.s.link_up = 1; |
| result.s.speed = 1000; |
| return result; |
| } else |
| return __cvmx_helper_board_link_get(ipd_port); |
| } |
| |
| /** |
| * Configure an IPD/PKO port for the specified link state. This |
| * function does not influence auto negotiation at the PHY level. |
| * The passed link state must always match the link state returned |
| * by cvmx_helper_link_get(). It is normally best to use |
| * cvmx_helper_link_autoconf() instead. |
| * |
| * @ipd_port: IPD/PKO port to configure |
| * @link_info: The new link state |
| * |
| * Returns Zero on success, negative on failure |
| */ |
| int __cvmx_helper_rgmii_link_set(int ipd_port, |
| cvmx_helper_link_info_t link_info) |
| { |
| int result = 0; |
| int interface = cvmx_helper_get_interface_num(ipd_port); |
| int index = cvmx_helper_get_interface_index_num(ipd_port); |
| union cvmx_gmxx_prtx_cfg original_gmx_cfg; |
| union cvmx_gmxx_prtx_cfg new_gmx_cfg; |
| union cvmx_pko_mem_queue_qos pko_mem_queue_qos; |
| union cvmx_pko_mem_queue_qos pko_mem_queue_qos_save[16]; |
| union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp; |
| union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp_save; |
| int i; |
| |
| /* Ignore speed sets in the simulator */ |
| if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) |
| return 0; |
| |
| /* Read the current settings so we know the current enable state */ |
| original_gmx_cfg.u64 = |
| cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); |
| new_gmx_cfg = original_gmx_cfg; |
| |
| /* Disable the lowest level RX */ |
| cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), |
| cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) & |
| ~(1 << index)); |
| |
| memset(pko_mem_queue_qos_save, 0, sizeof(pko_mem_queue_qos_save)); |
| /* Disable all queues so that TX should become idle */ |
| for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { |
| int queue = cvmx_pko_get_base_queue(ipd_port) + i; |
| cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue); |
| pko_mem_queue_qos.u64 = cvmx_read_csr(CVMX_PKO_MEM_QUEUE_QOS); |
| pko_mem_queue_qos.s.pid = ipd_port; |
| pko_mem_queue_qos.s.qid = queue; |
| pko_mem_queue_qos_save[i] = pko_mem_queue_qos; |
| pko_mem_queue_qos.s.qos_mask = 0; |
| cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, pko_mem_queue_qos.u64); |
| } |
| |
| /* Disable backpressure */ |
| gmx_tx_ovr_bp.u64 = cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface)); |
| gmx_tx_ovr_bp_save = gmx_tx_ovr_bp; |
| gmx_tx_ovr_bp.s.bp &= ~(1 << index); |
| gmx_tx_ovr_bp.s.en |= 1 << index; |
| cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp.u64); |
| cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface)); |
| |
| /* |
| * Poll the GMX state machine waiting for it to become |
| * idle. Preferably we should only change speed when it is |
| * idle. If it doesn't become idle we will still do the speed |
| * change, but there is a slight chance that GMX will |
| * lockup. |
| */ |
| cvmx_write_csr(CVMX_NPI_DBG_SELECT, |
| interface * 0x800 + index * 0x100 + 0x880); |
| CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 7, |
| ==, 0, 10000); |
| CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 0xf, |
| ==, 0, 10000); |
| |
| /* Disable the port before we make any changes */ |
| new_gmx_cfg.s.en = 0; |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); |
| cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); |
| |
| /* Set full/half duplex */ |
| if (cvmx_octeon_is_pass1()) |
| /* Half duplex is broken for 38XX Pass 1 */ |
| new_gmx_cfg.s.duplex = 1; |
| else if (!link_info.s.link_up) |
| /* Force full duplex on down links */ |
| new_gmx_cfg.s.duplex = 1; |
| else |
| new_gmx_cfg.s.duplex = link_info.s.full_duplex; |
| |
| /* Set the link speed. Anything unknown is set to 1Gbps */ |
| if (link_info.s.speed == 10) { |
| new_gmx_cfg.s.slottime = 0; |
| new_gmx_cfg.s.speed = 0; |
| } else if (link_info.s.speed == 100) { |
| new_gmx_cfg.s.slottime = 0; |
| new_gmx_cfg.s.speed = 0; |
| } else { |
| new_gmx_cfg.s.slottime = 1; |
| new_gmx_cfg.s.speed = 1; |
| } |
| |
| /* Adjust the clocks */ |
| if (link_info.s.speed == 10) { |
| cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 50); |
| cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); |
| cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); |
| } else if (link_info.s.speed == 100) { |
| cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 5); |
| cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); |
| cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); |
| } else { |
| cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); |
| cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); |
| cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); |
| } |
| |
| if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { |
| if ((link_info.s.speed == 10) || (link_info.s.speed == 100)) { |
| union cvmx_gmxx_inf_mode mode; |
| mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); |
| |
| /* |
| * Port .en .type .p0mii Configuration |
| * ---- --- ----- ------ ----------------------------------------- |
| * X 0 X X All links are disabled. |
| * 0 1 X 0 Port 0 is RGMII |
| * 0 1 X 1 Port 0 is MII |
| * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. |
| * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or |
| * MII port is selected by GMX_PRT1_CFG[SPEED]. |
| */ |
| |
| /* In MII mode, CLK_CNT = 1. */ |
| if (((index == 0) && (mode.s.p0mii == 1)) |
| || ((index != 0) && (mode.s.type == 1))) { |
| cvmx_write_csr(CVMX_GMXX_TXX_CLK |
| (index, interface), 1); |
| } |
| } |
| } |
| |
| /* Do a read to make sure all setup stuff is complete */ |
| cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); |
| |
| /* Save the new GMX setting without enabling the port */ |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); |
| |
| /* Enable the lowest level RX */ |
| cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), |
| cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) | (1 << |
| index)); |
| |
| /* Re-enable the TX path */ |
| for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { |
| int queue = cvmx_pko_get_base_queue(ipd_port) + i; |
| cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue); |
| cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, |
| pko_mem_queue_qos_save[i].u64); |
| } |
| |
| /* Restore backpressure */ |
| cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp_save.u64); |
| |
| /* Restore the GMX enable state. Port config is complete */ |
| new_gmx_cfg.s.en = original_gmx_cfg.s.en; |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); |
| |
| return result; |
| } |
| |
| /** |
| * Configure a port for internal and/or external loopback. Internal loopback |
| * causes packets sent by the port to be received by Octeon. External loopback |
| * causes packets received from the wire to sent out again. |
| * |
| * @ipd_port: IPD/PKO port to loopback. |
| * @enable_internal: |
| * Non zero if you want internal loopback |
| * @enable_external: |
| * Non zero if you want external loopback |
| * |
| * Returns Zero on success, negative on failure. |
| */ |
| int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal, |
| int enable_external) |
| { |
| int interface = cvmx_helper_get_interface_num(ipd_port); |
| int index = cvmx_helper_get_interface_index_num(ipd_port); |
| int original_enable; |
| union cvmx_gmxx_prtx_cfg gmx_cfg; |
| union cvmx_asxx_prt_loop asxx_prt_loop; |
| |
| /* Read the current enable state and save it */ |
| gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); |
| original_enable = gmx_cfg.s.en; |
| /* Force port to be disabled */ |
| gmx_cfg.s.en = 0; |
| if (enable_internal) { |
| /* Force speed if we're doing internal loopback */ |
| gmx_cfg.s.duplex = 1; |
| gmx_cfg.s.slottime = 1; |
| gmx_cfg.s.speed = 1; |
| cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); |
| cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); |
| cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); |
| } |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); |
| |
| /* Set the loopback bits */ |
| asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); |
| if (enable_internal) |
| asxx_prt_loop.s.int_loop |= 1 << index; |
| else |
| asxx_prt_loop.s.int_loop &= ~(1 << index); |
| if (enable_external) |
| asxx_prt_loop.s.ext_loop |= 1 << index; |
| else |
| asxx_prt_loop.s.ext_loop &= ~(1 << index); |
| cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), asxx_prt_loop.u64); |
| |
| /* Force enables in internal loopback */ |
| if (enable_internal) { |
| uint64_t tmp; |
| tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface)); |
| cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), |
| (1 << index) | tmp); |
| tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)); |
| cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), |
| (1 << index) | tmp); |
| original_enable = 1; |
| } |
| |
| /* Restore the enable state */ |
| gmx_cfg.s.en = original_enable; |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); |
| return 0; |
| } |