rapidio: rework device hierarchy and introduce mport class of devices
This patch removes an artificial RapidIO bus root device and establishes
actual device hierarchy by providing reference to real parent devices.
It also introduces device class for RapidIO controller devices (on-chip
or an eternal bridge, known as "mport").
Existing implementation was sufficient for SoC-based platforms that have
a single RapidIO controller. With introduction of devices using
multiple RapidIO controllers and PCIe-to-RapidIO bridges the old scheme
is very limiting or does not work at all. The implemented changes allow
to properly reference platform's local RapidIO mport devices and provide
device details needed for upper layers.
This change to RapidIO device hierarchy does not break any known
existing kernel or user space interfaces.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
Cc: Jerry Jacobs <jerry.jacobs@prodrive-technologies.com>
Cc: Arno Tiemersma <arno.tiemersma@prodrive-technologies.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index ff7cbf2..1753dc6 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -2256,6 +2256,7 @@
mport->phy_type = RIO_PHY_SERIAL;
mport->priv = (void *)priv;
mport->phys_efptr = 0x100;
+ mport->dev.parent = &pdev->dev;
priv->mport = mport;
INIT_LIST_HEAD(&mport->dbells);
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index c9ae692..f301f05 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -167,7 +167,6 @@
void rio_attach_device(struct rio_dev *rdev)
{
rdev->dev.bus = &rio_bus_type;
- rdev->dev.parent = &rio_bus;
}
EXPORT_SYMBOL_GPL(rio_attach_device);
@@ -216,9 +215,12 @@
return 0;
}
-struct device rio_bus = {
- .init_name = "rapidio",
+struct class rio_mport_class = {
+ .name = "rapidio_port",
+ .owner = THIS_MODULE,
+ .dev_groups = rio_mport_groups,
};
+EXPORT_SYMBOL_GPL(rio_mport_class);
struct bus_type rio_bus_type = {
.name = "rapidio",
@@ -233,14 +235,20 @@
/**
* rio_bus_init - Register the RapidIO bus with the device model
*
- * Registers the RIO bus device and RIO bus type with the Linux
+ * Registers the RIO mport device class and RIO bus type with the Linux
* device model.
*/
static int __init rio_bus_init(void)
{
- if (device_register(&rio_bus) < 0)
- printk("RIO: failed to register RIO bus device\n");
- return bus_register(&rio_bus_type);
+ int ret;
+
+ ret = class_register(&rio_mport_class);
+ if (!ret) {
+ ret = bus_register(&rio_bus_type);
+ if (ret)
+ class_unregister(&rio_mport_class);
+ }
+ return ret;
}
postcore_initcall(rio_bus_init);
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index d3a6539..47a1b2e 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -461,6 +461,7 @@
rdev->comp_tag & RIO_CTAG_UDEVID);
}
+ rdev->dev.parent = &port->dev;
rio_attach_device(rdev);
device_initialize(&rdev->dev);
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index e0221c6..cdb005c 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -341,3 +341,43 @@
&rio_bus_group,
NULL,
};
+
+static ssize_t
+port_destid_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rio_mport *mport = to_rio_mport(dev);
+
+ if (mport)
+ return sprintf(buf, "0x%04x\n", mport->host_deviceid);
+ else
+ return -ENODEV;
+}
+static DEVICE_ATTR_RO(port_destid);
+
+static ssize_t sys_size_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rio_mport *mport = to_rio_mport(dev);
+
+ if (mport)
+ return sprintf(buf, "%u\n", mport->sys_size);
+ else
+ return -ENODEV;
+}
+static DEVICE_ATTR_RO(sys_size);
+
+static struct attribute *rio_mport_attrs[] = {
+ &dev_attr_port_destid.attr,
+ &dev_attr_sys_size.attr,
+ NULL,
+};
+
+static const struct attribute_group rio_mport_group = {
+ .attrs = rio_mport_attrs,
+};
+
+const struct attribute_group *rio_mport_groups[] = {
+ &rio_mport_group,
+ NULL,
+};
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 2e8a20c..a54ba04 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1884,6 +1884,7 @@
int rio_register_mport(struct rio_mport *port)
{
struct rio_scan_node *scan = NULL;
+ int res = 0;
if (next_portid >= RIO_MAX_MPORTS) {
pr_err("RIO: reached specified max number of mports\n");
@@ -1894,6 +1895,16 @@
port->host_deviceid = rio_get_hdid(port->id);
port->nscan = NULL;
+ dev_set_name(&port->dev, "rapidio%d", port->id);
+ port->dev.class = &rio_mport_class;
+
+ res = device_register(&port->dev);
+ if (res)
+ dev_err(&port->dev, "RIO: mport%d registration failed ERR=%d\n",
+ port->id, res);
+ else
+ dev_dbg(&port->dev, "RIO: mport%d registered\n", port->id);
+
mutex_lock(&rio_mport_list_lock);
list_add_tail(&port->node, &rio_mports);
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 5f99d22..2d0550e 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -50,6 +50,7 @@
/* Structures internal to the RIO core code */
extern const struct attribute_group *rio_dev_groups[];
extern const struct attribute_group *rio_bus_groups[];
+extern const struct attribute_group *rio_mport_groups[];
#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))