diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ae6e7c4..801cad1 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3936,8 +3936,7 @@
 	case NAND_ECC_HW_OOB_FIRST:
 		/* Similar to NAND_ECC_HW, but a separate read_page handle */
 		if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
-			pr_warn("No ECC functions supplied; "
-				   "hardware ECC not possible\n");
+			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
 			BUG();
 		}
 		if (!ecc->read_page)
@@ -3968,8 +3967,7 @@
 		     ecc->read_page == nand_read_page_hwecc ||
 		     !ecc->write_page ||
 		     ecc->write_page == nand_write_page_hwecc)) {
-			pr_warn("No ECC functions supplied; "
-				   "hardware ECC not possible\n");
+			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
 			BUG();
 		}
 		/* Use standard syndrome read/write page function? */
@@ -3993,9 +3991,8 @@
 			}
 			break;
 		}
-		pr_warn("%d byte HW ECC not possible on "
-			   "%d byte page size, fallback to SW ECC\n",
-			   ecc->size, mtd->writesize);
+		pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+			ecc->size, mtd->writesize);
 		ecc->mode = NAND_ECC_SOFT;
 
 	case NAND_ECC_SOFT:
@@ -4048,8 +4045,7 @@
 		break;
 
 	case NAND_ECC_NONE:
-		pr_warn("NAND_ECC_NONE selected by board driver. "
-			   "This is not recommended!\n");
+		pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
 		ecc->read_page = nand_read_page_raw;
 		ecc->write_page = nand_write_page_raw;
 		ecc->read_oob = nand_read_oob_std;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 443fa82..9bb8453 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -201,12 +201,12 @@
 		res = mtd_read(mtd, from, len, &retlen, buf);
 		if (res < 0) {
 			if (mtd_is_eccerr(res)) {
-				pr_info("nand_bbt: ECC error in BBT at "
-					"0x%012llx\n", from & ~mtd->writesize);
+				pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
+					from & ~mtd->writesize);
 				return res;
 			} else if (mtd_is_bitflip(res)) {
-				pr_info("nand_bbt: corrected error in BBT at "
-					"0x%012llx\n", from & ~mtd->writesize);
+				pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
+					from & ~mtd->writesize);
 				ret = res;
 			} else {
 				pr_info("nand_bbt: error reading BBT\n");
@@ -580,8 +580,8 @@
 		if (td->pages[i] == -1)
 			pr_warn("Bad block table not found for chip %d\n", i);
 		else
-			pr_info("Bad block table found at page %d, version "
-				 "0x%02X\n", td->pages[i], td->version[i]);
+			pr_info("Bad block table found at page %d, version 0x%02X\n",
+				td->pages[i], td->version[i]);
 	}
 	return 0;
 }
@@ -725,12 +725,10 @@
 			res = mtd_read(mtd, to, len, &retlen, buf);
 			if (res < 0) {
 				if (retlen != len) {
-					pr_info("nand_bbt: error reading block "
-						"for writing the bad block table\n");
+					pr_info("nand_bbt: error reading block for writing the bad block table\n");
 					return res;
 				}
-				pr_warn("nand_bbt: ECC error while reading "
-					"block for writing bad block table\n");
+				pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
 			}
 			/* Read oob data */
 			ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@@ -1338,9 +1336,8 @@
 	block = (int)(offs >> this->bbt_erase_shift);
 	res = bbt_get_entry(this, block);
 
-	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
-			"(block %d) 0x%02x\n",
-			(unsigned int)offs, block, res);
+	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+		 (unsigned int)offs, block, res);
 
 	switch (res) {
 	case BBT_BLOCK_GOOD: