blob: a7b5cb0c2753845a581543e2ccca7963993592b0 [file] [log] [blame]
/*
* linux/drivers/net/wireless/libertas/if_sdio.c
*
* Copyright 2007-2008 Pierre Ossman
*
* Inspired by if_cs.c, Copyright 2007 Holger Schurig
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This hardware has more or less no CMD53 support, so all registers
* must be accessed using sdio_readb()/sdio_writeb().
*
* Transfers must be in one transaction or the firmware goes bonkers.
* This means that the transfer must either be small enough to do a
* byte based transfer or it must be padded to a multiple of the
* current block size.
*
* As SDIO is still new to the kernel, it is unfortunately common with
* bugs in the host controllers related to that. One such bug is that
* controllers cannot do transfers that aren't a multiple of 4 bytes.
* If you don't have time to fix the host controller driver, you can
* work around the problem by modifying if_sdio_host_to_card() and
* if_sdio_card_to_host() to pad the data.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/mmc/card.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/host.h>
#include "host.h"
#include "decl.h"
#include "defs.h"
#include "dev.h"
#include "cmd.h"
#include "if_sdio.h"
/* The if_sdio_remove() callback function is called when
* user removes this module from kernel space or ejects
* the card from the slot. The driver handles these 2 cases
* differently for SD8688 combo chip.
* If the user is removing the module, the FUNC_SHUTDOWN
* command for SD8688 is sent to the firmware.
* If the card is removed, there is no need to send this command.
*
* The variable 'user_rmmod' is used to distinguish these two
* scenarios. This flag is initialized as FALSE in case the card
* is removed, and will be set to TRUE for module removal when
* module_exit function is called.
*/
static u8 user_rmmod;
static char *lbs_helper_name = NULL;
module_param_named(helper_name, lbs_helper_name, charp, 0644);
static char *lbs_fw_name = NULL;
module_param_named(fw_name, lbs_fw_name, charp, 0644);
static const struct sdio_device_id if_sdio_ids[] = {
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
SDIO_DEVICE_ID_MARVELL_8688WLAN) },
{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(sdio, if_sdio_ids);
#define MODEL_8385 0x04
#define MODEL_8686 0x0b
#define MODEL_8688 0x10
static const struct lbs_fw_table fw_table[] = {
{ MODEL_8385, "libertas/sd8385_helper.bin", "libertas/sd8385.bin" },
{ MODEL_8385, "sd8385_helper.bin", "sd8385.bin" },
{ MODEL_8686, "libertas/sd8686_v9_helper.bin", "libertas/sd8686_v9.bin" },
{ MODEL_8686, "libertas/sd8686_v8_helper.bin", "libertas/sd8686_v8.bin" },
{ MODEL_8686, "sd8686_helper.bin", "sd8686.bin" },
{ MODEL_8688, "libertas/sd8688_helper.bin", "libertas/sd8688.bin" },
{ MODEL_8688, "sd8688_helper.bin", "sd8688.bin" },
{ 0, NULL, NULL }
};
MODULE_FIRMWARE("libertas/sd8385_helper.bin");
MODULE_FIRMWARE("libertas/sd8385.bin");
MODULE_FIRMWARE("sd8385_helper.bin");
MODULE_FIRMWARE("sd8385.bin");
MODULE_FIRMWARE("libertas/sd8686_v9_helper.bin");
MODULE_FIRMWARE("libertas/sd8686_v9.bin");
MODULE_FIRMWARE("libertas/sd8686_v8_helper.bin");
MODULE_FIRMWARE("libertas/sd8686_v8.bin");
MODULE_FIRMWARE("sd8686_helper.bin");
MODULE_FIRMWARE("sd8686.bin");
MODULE_FIRMWARE("libertas/sd8688_helper.bin");
MODULE_FIRMWARE("libertas/sd8688.bin");
MODULE_FIRMWARE("sd8688_helper.bin");
MODULE_FIRMWARE("sd8688.bin");
struct if_sdio_packet {
struct if_sdio_packet *next;
u16 nb;
u8 buffer[0] __attribute__((aligned(4)));
};
struct if_sdio_card {
struct sdio_func *func;
struct lbs_private *priv;
int model;
unsigned long ioport;
unsigned int scratch_reg;
const char *helper;
const char *firmware;
bool helper_allocated;
bool firmware_allocated;
u8 buffer[65536] __attribute__((aligned(4)));
spinlock_t lock;
struct if_sdio_packet *packets;
struct workqueue_struct *workqueue;
struct work_struct packet_worker;
u8 rx_unit;
};
/********************************************************************/
/* I/O */
/********************************************************************/
/*
* For SD8385/SD8686, this function reads firmware status after
* the image is downloaded, or reads RX packet length when
* interrupt (with IF_SDIO_H_INT_UPLD bit set) is received.
* For SD8688, this function reads firmware status only.
*/
static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
{
int ret;
u16 scratch;
scratch = sdio_readb(card->func, card->scratch_reg, &ret);
if (!ret)
scratch |= sdio_readb(card->func, card->scratch_reg + 1,
&ret) << 8;
if (err)
*err = ret;
if (ret)
return 0xffff;
return scratch;
}
static u8 if_sdio_read_rx_unit(struct if_sdio_card *card)
{
int ret;
u8 rx_unit;
rx_unit = sdio_readb(card->func, IF_SDIO_RX_UNIT, &ret);
if (ret)
rx_unit = 0;
return rx_unit;
}
static u16 if_sdio_read_rx_len(struct if_sdio_card *card, int *err)
{
int ret;
u16 rx_len;
switch (card->model) {
case MODEL_8385:
case MODEL_8686:
rx_len = if_sdio_read_scratch(card, &ret);
break;
case MODEL_8688:
default: /* for newer chipsets */
rx_len = sdio_readb(card->func, IF_SDIO_RX_LEN, &ret);
if (!ret)
rx_len <<= card->rx_unit;
else
rx_len = 0xffff; /* invalid length */
break;
}
if (err)
*err = ret;
return rx_len;
}
static int if_sdio_handle_cmd(struct if_sdio_card *card,
u8 *buffer, unsigned size)
{
struct lbs_private *priv = card->priv;
int ret;
unsigned long flags;
u8 i;
lbs_deb_enter(LBS_DEB_SDIO);
if (size > LBS_CMD_BUFFER_SIZE) {
lbs_deb_sdio("response packet too large (%d bytes)\n",
(int)size);
ret = -E2BIG;
goto out;
}
spin_lock_irqsave(&priv->driver_lock, flags);
i = (priv->resp_idx == 0) ? 1 : 0;
BUG_ON(priv->resp_len[i]);
priv->resp_len[i] = size;
memcpy(priv->resp_buf[i], buffer, size);
lbs_notify_command_response(priv, i);
spin_unlock_irqrestore(&card->priv->driver_lock, flags);
ret = 0;
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static int if_sdio_handle_data(struct if_sdio_card *card,
u8 *buffer, unsigned size)
{
int ret;
struct sk_buff *skb;
char *data;
lbs_deb_enter(LBS_DEB_SDIO);
if (size > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
lbs_deb_sdio("response packet too large (%d bytes)\n",
(int)size);
ret = -E2BIG;
goto out;
}
skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + NET_IP_ALIGN);
if (!skb) {
ret = -ENOMEM;
goto out;
}
skb_reserve(skb, NET_IP_ALIGN);
data = skb_put(skb, size);
memcpy(data, buffer, size);
lbs_process_rxed_packet(card->priv, skb);
ret = 0;
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static int if_sdio_handle_event(struct if_sdio_card *card,
u8 *buffer, unsigned size)
{
int ret;
u32 event;
lbs_deb_enter(LBS_DEB_SDIO);
if (card->model == MODEL_8385) {
event = sdio_readb(card->func, IF_SDIO_EVENT, &ret);
if (ret)
goto out;
/* right shift 3 bits to get the event id */
event >>= 3;
} else {
if (size < 4) {
lbs_deb_sdio("event packet too small (%d bytes)\n",
(int)size);
ret = -EINVAL;
goto out;
}
event = buffer[3] << 24;
event |= buffer[2] << 16;
event |= buffer[1] << 8;
event |= buffer[0] << 0;
}
lbs_queue_event(card->priv, event & 0xFF);
ret = 0;
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static int if_sdio_wait_status(struct if_sdio_card *card, const u8 condition)
{
u8 status;
unsigned long timeout;
int ret = 0;
timeout = jiffies + HZ;
while (1) {
status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
if (ret)
return ret;
if ((status & condition) == condition)
break;
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
mdelay(1);
}
return ret;
}
static int if_sdio_card_to_host(struct if_sdio_card *card)
{
int ret;
u16 size, type, chunk;
lbs_deb_enter(LBS_DEB_SDIO);
size = if_sdio_read_rx_len(card, &ret);
if (ret)
goto out;
if (size < 4) {
lbs_deb_sdio("invalid packet size (%d bytes) from firmware\n",
(int)size);
ret = -EINVAL;
goto out;
}
ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
if (ret)
goto out;
/*
* The transfer must be in one transaction or the firmware
* goes suicidal. There's no way to guarantee that for all
* controllers, but we can at least try.
*/
chunk = sdio_align_size(card->func, size);
ret = sdio_readsb(card->func, card->buffer, card->ioport, chunk);
if (ret)
goto out;
chunk = card->buffer[0] | (card->buffer[1] << 8);
type = card->buffer[2] | (card->buffer[3] << 8);
lbs_deb_sdio("packet of type %d and size %d bytes\n",
(int)type, (int)chunk);
if (chunk > size) {
lbs_deb_sdio("packet fragment (%d > %d)\n",
(int)chunk, (int)size);
ret = -EINVAL;
goto out;
}
if (chunk < size) {
lbs_deb_sdio("packet fragment (%d < %d)\n",
(int)chunk, (int)size);
}
switch (type) {
case MVMS_CMD:
ret = if_sdio_handle_cmd(card, card->buffer + 4, chunk - 4);
if (ret)
goto out;
break;
case MVMS_DAT:
ret = if_sdio_handle_data(card, card->buffer + 4, chunk - 4);
if (ret)
goto out;
break;
case MVMS_EVENT:
ret = if_sdio_handle_event(card, card->buffer + 4, chunk - 4);
if (ret)
goto out;
break;
default:
lbs_deb_sdio("invalid type (%d) from firmware\n",
(int)type);
ret = -EINVAL;
goto out;
}
out:
if (ret)
pr_err("problem fetching packet from firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static void if_sdio_host_to_card_worker(struct work_struct *work)
{
struct if_sdio_card *card;
struct if_sdio_packet *packet;
int ret;
unsigned long flags;
lbs_deb_enter(LBS_DEB_SDIO);
card = container_of(work, struct if_sdio_card, packet_worker);
while (1) {
spin_lock_irqsave(&card->lock, flags);
packet = card->packets;
if (packet)
card->packets = packet->next;
spin_unlock_irqrestore(&card->lock, flags);
if (!packet)
break;
sdio_claim_host(card->func);
ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
if (ret == 0) {
ret = sdio_writesb(card->func, card->ioport,
packet->buffer, packet->nb);
}
if (ret)
pr_err("error %d sending packet to firmware\n", ret);
sdio_release_host(card->func);
kfree(packet);
}
lbs_deb_leave(LBS_DEB_SDIO);
}
/********************************************************************/
/* Firmware */
/********************************************************************/
#define FW_DL_READY_STATUS (IF_SDIO_IO_RDY | IF_SDIO_DL_RDY)
static int if_sdio_prog_helper(struct if_sdio_card *card,
const struct firmware *fw)
{
int ret;
unsigned long timeout;
u8 *chunk_buffer;
u32 chunk_size;
const u8 *firmware;
size_t size;
lbs_deb_enter(LBS_DEB_SDIO);
chunk_buffer = kzalloc(64, GFP_KERNEL);
if (!chunk_buffer) {
ret = -ENOMEM;
goto out;
}
sdio_claim_host(card->func);
ret = sdio_set_block_size(card->func, 32);
if (ret)
goto release;
firmware = fw->data;
size = fw->size;
while (size) {
ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
if (ret)
goto release;
/* On some platforms (like Davinci) the chip needs more time
* between helper blocks.
*/
mdelay(2);
chunk_size = min(size, (size_t)60);
*((__le32*)chunk_buffer) = cpu_to_le32(chunk_size);
memcpy(chunk_buffer + 4, firmware, chunk_size);
/*
lbs_deb_sdio("sending %d bytes chunk\n", chunk_size);
*/
ret = sdio_writesb(card->func, card->ioport,
chunk_buffer, 64);
if (ret)
goto release;
firmware += chunk_size;
size -= chunk_size;
}
/* an empty block marks the end of the transfer */
memset(chunk_buffer, 0, 4);
ret = sdio_writesb(card->func, card->ioport, chunk_buffer, 64);
if (ret)
goto release;
lbs_deb_sdio("waiting for helper to boot...\n");
/* wait for the helper to boot by looking at the size register */
timeout = jiffies + HZ;
while (1) {
u16 req_size;
req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
if (ret)
goto release;
req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8;
if (ret)
goto release;
if (req_size != 0)
break;
if (time_after(jiffies, timeout)) {
ret = -ETIMEDOUT;
goto release;
}
msleep(10);
}
ret = 0;
release:
sdio_release_host(card->func);
kfree(chunk_buffer);
out:
if (ret)
pr_err("failed to load helper firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static int if_sdio_prog_real(struct if_sdio_card *card,
const struct firmware *fw)
{
int ret;
unsigned long timeout;
u8 *chunk_buffer;
u32 chunk_size;
const u8 *firmware;
size_t size, req_size;
lbs_deb_enter(LBS_DEB_SDIO);
chunk_buffer = kzalloc(512, GFP_KERNEL);
if (!chunk_buffer) {
ret = -ENOMEM;
goto out;
}
sdio_claim_host(card->func);
ret = sdio_set_block_size(card->func, 32);
if (ret)
goto release;
firmware = fw->data;
size = fw->size;
while (size) {
ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
if (ret)
goto release;
req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
if (ret)
goto release;
req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8;
if (ret)
goto release;
/*
lbs_deb_sdio("firmware wants %d bytes\n", (int)req_size);
*/
if (req_size == 0) {
lbs_deb_sdio("firmware helper gave up early\n");
ret = -EIO;
goto release;
}
if (req_size & 0x01) {
lbs_deb_sdio("firmware helper signalled error\n");
ret = -EIO;
goto release;
}
if (req_size > size)
req_size = size;
while (req_size) {
chunk_size = min(req_size, (size_t)512);
memcpy(chunk_buffer, firmware, chunk_size);
/*
lbs_deb_sdio("sending %d bytes (%d bytes) chunk\n",
chunk_size, (chunk_size + 31) / 32 * 32);
*/
ret = sdio_writesb(card->func, card->ioport,
chunk_buffer, roundup(chunk_size, 32));
if (ret)
goto release;
firmware += chunk_size;
size -= chunk_size;
req_size -= chunk_size;
}
}
ret = 0;
lbs_deb_sdio("waiting for firmware to boot...\n");
/* wait for the firmware to boot */
timeout = jiffies + HZ;
while (1) {
u16 scratch;
scratch = if_sdio_read_scratch(card, &ret);
if (ret)
goto release;
if (scratch == IF_SDIO_FIRMWARE_OK)
break;
if (time_after(jiffies, timeout)) {
ret = -ETIMEDOUT;
goto release;
}
msleep(10);
}
ret = 0;
release:
sdio_release_host(card->func);
kfree(chunk_buffer);
out:
if (ret)
pr_err("failed to load firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static int if_sdio_prog_firmware(struct if_sdio_card *card)
{
int ret;
u16 scratch;
const struct firmware *helper = NULL;
const struct firmware *mainfw = NULL;
lbs_deb_enter(LBS_DEB_SDIO);
/*
* Disable interrupts
*/
sdio_claim_host(card->func);
sdio_writeb(card->func, 0x00, IF_SDIO_H_INT_MASK, &ret);
sdio_release_host(card->func);
sdio_claim_host(card->func);
scratch = if_sdio_read_scratch(card, &ret);
sdio_release_host(card->func);
lbs_deb_sdio("firmware status = %#x\n", scratch);
lbs_deb_sdio("scratch ret = %d\n", ret);
if (ret)
goto out;
/*
* The manual clearly describes that FEDC is the right code to use
* to detect firmware presence, but for SD8686 it is not that simple.
* Scratch is also used to store the RX packet length, so we lose
* the FEDC value early on. So we use a non-zero check in order
* to validate firmware presence.
* Additionally, the SD8686 in the Gumstix always has the high scratch
* bit set, even when the firmware is not loaded. So we have to
* exclude that from the test.
*/
if (scratch == IF_SDIO_FIRMWARE_OK) {
lbs_deb_sdio("firmware already loaded\n");
goto success;
} else if ((card->model == MODEL_8686) && (scratch & 0x7fff)) {
lbs_deb_sdio("firmware may be running\n");
goto success;
}
ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
card->model, &fw_table[0], &helper, &mainfw);
if (ret) {
pr_err("failed to find firmware (%d)\n", ret);
goto out;
}
ret = if_sdio_prog_helper(card, helper);
if (ret)
goto out;
lbs_deb_sdio("Helper firmware loaded\n");
ret = if_sdio_prog_real(card, mainfw);
if (ret)
goto out;
lbs_deb_sdio("Firmware loaded\n");
success:
sdio_claim_host(card->func);
sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
sdio_release_host(card->func);
ret = 0;
out:
if (helper)
release_firmware(helper);
if (mainfw)
release_firmware(mainfw);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
/*******************************************************************/
/* Libertas callbacks */
/*******************************************************************/
static int if_sdio_host_to_card(struct lbs_private *priv,
u8 type, u8 *buf, u16 nb)
{
int ret;
struct if_sdio_card *card;
struct if_sdio_packet *packet, *cur;
u16 size;
unsigned long flags;
lbs_deb_enter_args(LBS_DEB_SDIO, "type %d, bytes %d", type, nb);
card = priv->card;
if (nb > (65536 - sizeof(struct if_sdio_packet) - 4)) {
ret = -EINVAL;
goto out;
}
/*
* The transfer must be in one transaction or the firmware
* goes suicidal. There's no way to guarantee that for all
* controllers, but we can at least try.
*/
size = sdio_align_size(card->func, nb + 4);
packet = kzalloc(sizeof(struct if_sdio_packet) + size,
GFP_ATOMIC);
if (!packet) {
ret = -ENOMEM;
goto out;
}
packet->next = NULL;
packet->nb = size;
/*
* SDIO specific header.
*/
packet->buffer[0] = (nb + 4) & 0xff;
packet->buffer[1] = ((nb + 4) >> 8) & 0xff;
packet->buffer[2] = type;
packet->buffer[3] = 0;
memcpy(packet->buffer + 4, buf, nb);
spin_lock_irqsave(&card->lock, flags);
if (!card->packets)
card->packets = packet;
else {
cur = card->packets;
while (cur->next)
cur = cur->next;
cur->next = packet;
}
switch (type) {
case MVMS_CMD:
priv->dnld_sent = DNLD_CMD_SENT;
break;
case MVMS_DAT:
priv->dnld_sent = DNLD_DATA_SENT;
break;
default:
lbs_deb_sdio("unknown packet type %d\n", (int)type);
}
spin_unlock_irqrestore(&card->lock, flags);
queue_work(card->workqueue, &card->packet_worker);
ret = 0;
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static int if_sdio_enter_deep_sleep(struct lbs_private *priv)
{
int ret = -1;
struct cmd_header cmd;
memset(&cmd, 0, sizeof(cmd));
lbs_deb_sdio("send DEEP_SLEEP command\n");
ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
lbs_cmd_copyback, (unsigned long) &cmd);
if (ret)
netdev_err(priv->dev, "DEEP_SLEEP cmd failed\n");
mdelay(200);
return ret;
}
static int if_sdio_exit_deep_sleep(struct lbs_private *priv)
{
struct if_sdio_card *card = priv->card;
int ret = -1;
lbs_deb_enter(LBS_DEB_SDIO);
sdio_claim_host(card->func);
sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
if (ret)
netdev_err(priv->dev, "sdio_writeb failed!\n");
sdio_release_host(card->func);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
{
struct if_sdio_card *card = priv->card;
int ret = -1;
lbs_deb_enter(LBS_DEB_SDIO);
sdio_claim_host(card->func);
sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
if (ret)
netdev_err(priv->dev, "sdio_writeb failed!\n");
sdio_release_host(card->func);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
/*******************************************************************/
/* SDIO callbacks */
/*******************************************************************/
static void if_sdio_interrupt(struct sdio_func *func)
{
int ret;
struct if_sdio_card *card;
u8 cause;
lbs_deb_enter(LBS_DEB_SDIO);
card = sdio_get_drvdata(func);
cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
if (ret)
goto out;
lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
sdio_writeb(card->func, ~cause, IF_SDIO_H_INT_STATUS, &ret);
if (ret)
goto out;
/*
* Ignore the define name, this really means the card has
* successfully received the command.
*/
card->priv->is_activity_detected = 1;
if (cause & IF_SDIO_H_INT_DNLD)
lbs_host_to_card_done(card->priv);
if (cause & IF_SDIO_H_INT_UPLD) {
ret = if_sdio_card_to_host(card);
if (ret)
goto out;
}
ret = 0;
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
}
static int if_sdio_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
struct if_sdio_card *card;
struct lbs_private *priv;
int ret, i;
unsigned int model;
struct if_sdio_packet *packet;
struct mmc_host *host = func->card->host;
lbs_deb_enter(LBS_DEB_SDIO);
for (i = 0;i < func->card->num_info;i++) {
if (sscanf(func->card->info[i],
"802.11 SDIO ID: %x", &model) == 1)
break;
if (sscanf(func->card->info[i],
"ID: %x", &model) == 1)
break;
if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
model = MODEL_8385;
break;
}
}
if (i == func->card->num_info) {
pr_err("unable to identify card model\n");
return -ENODEV;
}
card = kzalloc(sizeof(struct if_sdio_card), GFP_KERNEL);
if (!card)
return -ENOMEM;
card->func = func;
card->model = model;
switch (card->model) {
case MODEL_8385:
card->scratch_reg = IF_SDIO_SCRATCH_OLD;
break;
case MODEL_8686:
card->scratch_reg = IF_SDIO_SCRATCH;
break;
case MODEL_8688:
default: /* for newer chipsets */
card->scratch_reg = IF_SDIO_FW_STATUS;
break;
}
spin_lock_init(&card->lock);
card->workqueue = create_workqueue("libertas_sdio");
INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
/* Check if we support this card */
for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
if (card->model == fw_table[i].model)
break;
}
if (i == ARRAY_SIZE(fw_table)) {
pr_err("unknown card model 0x%x\n", card->model);
ret = -ENODEV;
goto free;
}
sdio_claim_host(func);
ret = sdio_enable_func(func);
if (ret)
goto release;
ret = sdio_claim_irq(func, if_sdio_interrupt);
if (ret)
goto disable;
/* For 1-bit transfers to the 8686 model, we need to enable the
* interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
* bit to allow access to non-vendor registers. */
if ((card->model == MODEL_8686) &&
(host->caps & MMC_CAP_SDIO_IRQ) &&
(host->ios.bus_width == MMC_BUS_WIDTH_1)) {
u8 reg;
func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
if (ret)
goto release_int;
reg |= SDIO_BUS_ECSI;
sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
if (ret)
goto release_int;
}
card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
if (ret)
goto release_int;
card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
if (ret)
goto release_int;
card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
if (ret)
goto release_int;
sdio_release_host(func);
sdio_set_drvdata(func, card);
lbs_deb_sdio("class = 0x%X, vendor = 0x%X, "
"device = 0x%X, model = 0x%X, ioport = 0x%X\n",
func->class, func->vendor, func->device,
model, (unsigned)card->ioport);
ret = if_sdio_prog_firmware(card);
if (ret)
goto reclaim;
priv = lbs_add_card(card, &func->dev);
if (!priv) {
ret = -ENOMEM;
goto reclaim;
}
card->priv = priv;
priv->card = card;
priv->hw_host_to_card = if_sdio_host_to_card;
priv->enter_deep_sleep = if_sdio_enter_deep_sleep;
priv->exit_deep_sleep = if_sdio_exit_deep_sleep;
priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup;
sdio_claim_host(func);
/*
* Get rx_unit if the chip is SD8688 or newer.
* SD8385 & SD8686 do not have rx_unit.
*/
if ((card->model != MODEL_8385)
&& (card->model != MODEL_8686))
card->rx_unit = if_sdio_read_rx_unit(card);
else
card->rx_unit = 0;
/*
* Enable interrupts now that everything is set up
*/
sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
sdio_release_host(func);
if (ret)
goto reclaim;
priv->fw_ready = 1;
/*
* FUNC_INIT is required for SD8688 WLAN/BT multiple functions
*/
if (card->model == MODEL_8688) {
struct cmd_header cmd;
memset(&cmd, 0, sizeof(cmd));
lbs_deb_sdio("send function INIT command\n");
if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
lbs_cmd_copyback, (unsigned long) &cmd))
netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
}
ret = lbs_start_card(priv);
if (ret)
goto err_activate_card;
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
err_activate_card:
flush_workqueue(card->workqueue);
lbs_remove_card(priv);
reclaim:
sdio_claim_host(func);
release_int:
sdio_release_irq(func);
disable:
sdio_disable_func(func);
release:
sdio_release_host(func);
free:
destroy_workqueue(card->workqueue);
while (card->packets) {
packet = card->packets;
card->packets = card->packets->next;
kfree(packet);
}
if (card->helper_allocated)
kfree(card->helper);
if (card->firmware_allocated)
kfree(card->firmware);
kfree(card);
goto out;
}
static void if_sdio_remove(struct sdio_func *func)
{
struct if_sdio_card *card;
struct if_sdio_packet *packet;
lbs_deb_enter(LBS_DEB_SDIO);
card = sdio_get_drvdata(func);
if (user_rmmod && (card->model == MODEL_8688)) {
/*
* FUNC_SHUTDOWN is required for SD8688 WLAN/BT
* multiple functions
*/
struct cmd_header cmd;
memset(&cmd, 0, sizeof(cmd));
lbs_deb_sdio("send function SHUTDOWN command\n");
if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
&cmd, sizeof(cmd), lbs_cmd_copyback,
(unsigned long) &cmd))
pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
}
lbs_deb_sdio("call remove card\n");
lbs_stop_card(card->priv);
lbs_remove_card(card->priv);
flush_workqueue(card->workqueue);
destroy_workqueue(card->workqueue);
sdio_claim_host(func);
sdio_release_irq(func);
sdio_disable_func(func);
sdio_release_host(func);
while (card->packets) {
packet = card->packets;
card->packets = card->packets->next;
kfree(packet);
}
if (card->helper_allocated)
kfree(card->helper);
if (card->firmware_allocated)
kfree(card->firmware);
kfree(card);
lbs_deb_leave(LBS_DEB_SDIO);
}
static int if_sdio_suspend(struct device *dev)
{
struct sdio_func *func = dev_to_sdio_func(dev);
int ret;
struct if_sdio_card *card = sdio_get_drvdata(func);
mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
sdio_func_id(func), flags);
/* If we aren't being asked to wake on anything, we should bail out
* and let the SD stack power down the card.
*/
if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
dev_info(dev, "Suspend without wake params -- powering down card\n");
return -ENOSYS;
}
if (!(flags & MMC_PM_KEEP_POWER)) {
dev_err(dev, "%s: cannot remain alive while host is suspended\n",
sdio_func_id(func));
return -ENOSYS;
}
ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
if (ret)
return ret;
ret = lbs_suspend(card->priv);
if (ret)
return ret;
return sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ);
}
static int if_sdio_resume(struct device *dev)
{
struct sdio_func *func = dev_to_sdio_func(dev);
struct if_sdio_card *card = sdio_get_drvdata(func);
int ret;
dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func));
ret = lbs_resume(card->priv);
return ret;
}
static const struct dev_pm_ops if_sdio_pm_ops = {
.suspend = if_sdio_suspend,
.resume = if_sdio_resume,
};
static struct sdio_driver if_sdio_driver = {
.name = "libertas_sdio",
.id_table = if_sdio_ids,
.probe = if_sdio_probe,
.remove = if_sdio_remove,
.drv = {
.pm = &if_sdio_pm_ops,
},
};
/*******************************************************************/
/* Module functions */
/*******************************************************************/
static int __init if_sdio_init_module(void)
{
int ret = 0;
lbs_deb_enter(LBS_DEB_SDIO);
printk(KERN_INFO "libertas_sdio: Libertas SDIO driver\n");
printk(KERN_INFO "libertas_sdio: Copyright Pierre Ossman\n");
ret = sdio_register_driver(&if_sdio_driver);
/* Clear the flag in case user removes the card. */
user_rmmod = 0;
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
static void __exit if_sdio_exit_module(void)
{
lbs_deb_enter(LBS_DEB_SDIO);
/* Set the flag as user is removing this module. */
user_rmmod = 1;
sdio_unregister_driver(&if_sdio_driver);
lbs_deb_leave(LBS_DEB_SDIO);
}
module_init(if_sdio_init_module);
module_exit(if_sdio_exit_module);
MODULE_DESCRIPTION("Libertas SDIO WLAN Driver");
MODULE_AUTHOR("Pierre Ossman");
MODULE_LICENSE("GPL");