drivers/net/wireless/mwifiex/sdio.h - kernel/msm-4.9 - Gitiles

 /*
  * Marvell Wireless LAN device driver: SDIO specific definitions
  *
  * Copyright (C) 2011, Marvell International Ltd.
  *
  * This software file (the "File") is distributed by Marvell International
  * Ltd. under the terms of the GNU General Public License Version 2, June 1991
  * (the "License").  You may use, redistribute and/or modify this File in
  * accordance with the terms and conditions of the License, a copy of which
  * is available by writing to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
  * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
  *
  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
  * this warranty disclaimer.
  */

 #ifndef	_MWIFIEX_SDIO_H
 #define	_MWIFIEX_SDIO_H


 #include <linux/mmc/sdio.h>
 #include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/card.h>

 #include "main.h"

 #define BLOCK_MODE	1
 #define BYTE_MODE	0

 #define REG_PORT			0
 #define RD_BITMAP_L			0x04
 #define RD_BITMAP_U			0x05
 #define WR_BITMAP_L			0x06
 #define WR_BITMAP_U			0x07
 #define RD_LEN_P0_L			0x08
 #define RD_LEN_P0_U			0x09

 #define MWIFIEX_SDIO_IO_PORT_MASK		0xfffff

 #define MWIFIEX_SDIO_BYTE_MODE_MASK	0x80000000

 #define CTRL_PORT			0
 #define CTRL_PORT_MASK			0x0001
 #define DATA_PORT_MASK			0xfffe

 #define MAX_MP_REGS			64
 #define MAX_PORT			16

 #define SDIO_MP_AGGR_DEF_PKT_LIMIT	8

 #define SDIO_MP_TX_AGGR_DEF_BUF_SIZE        (4096)	/* 4K */

 /* Multi port RX aggregation buffer size */
 #define SDIO_MP_RX_AGGR_DEF_BUF_SIZE        (4096)	/* 4K */

 /* Misc. Config Register : Auto Re-enable interrupts */
 #define AUTO_RE_ENABLE_INT              BIT(4)

 /* Host Control Registers */
 /* Host Control Registers : I/O port 0 */
 #define IO_PORT_0_REG			0x78
 /* Host Control Registers : I/O port 1 */
 #define IO_PORT_1_REG			0x79
 /* Host Control Registers : I/O port 2 */
 #define IO_PORT_2_REG			0x7A

 /* Host Control Registers : Configuration */
 #define CONFIGURATION_REG		0x00
 /* Host Control Registers : Host without Command 53 finish host*/
 #define HOST_TO_CARD_EVENT       (0x1U << 3)
 /* Host Control Registers : Host without Command 53 finish host */
 #define HOST_WO_CMD53_FINISH_HOST	(0x1U << 2)
 /* Host Control Registers : Host power up */
 #define HOST_POWER_UP			(0x1U << 1)
 /* Host Control Registers : Host power down */
 #define HOST_POWER_DOWN			(0x1U << 0)

 /* Host Control Registers : Host interrupt mask */
 #define HOST_INT_MASK_REG		0x02
 /* Host Control Registers : Upload host interrupt mask */
 #define UP_LD_HOST_INT_MASK		(0x1U)
 /* Host Control Registers : Download host interrupt mask */
 #define DN_LD_HOST_INT_MASK		(0x2U)
 /* Enable Host interrupt mask */
 #define HOST_INT_ENABLE	(UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK)
 /* Disable Host interrupt mask */
 #define	HOST_INT_DISABLE		0xff

 /* Host Control Registers : Host interrupt status */
 #define HOST_INTSTATUS_REG		0x03
 /* Host Control Registers : Upload host interrupt status */
 #define UP_LD_HOST_INT_STATUS		(0x1U)
 /* Host Control Registers : Download host interrupt status */
 #define DN_LD_HOST_INT_STATUS		(0x2U)

 /* Host Control Registers : Host interrupt RSR */
 #define HOST_INT_RSR_REG		0x01
 /* Host Control Registers : Upload host interrupt RSR */
 #define UP_LD_HOST_INT_RSR		(0x1U)
 #define SDIO_INT_MASK			0x3F

 /* Host Control Registers : Host interrupt status */
 #define HOST_INT_STATUS_REG		0x28
 /* Host Control Registers : Upload CRC error */
 #define UP_LD_CRC_ERR			(0x1U << 2)
 /* Host Control Registers : Upload restart */
 #define UP_LD_RESTART                   (0x1U << 1)
 /* Host Control Registers : Download restart */
 #define DN_LD_RESTART                   (0x1U << 0)

 /* Card Control Registers : Card status register */
 #define CARD_STATUS_REG                 0x30
 /* Card Control Registers : Card I/O ready */
 #define CARD_IO_READY                   (0x1U << 3)
 /* Card Control Registers : CIS card ready */
 #define CIS_CARD_RDY                    (0x1U << 2)
 /* Card Control Registers : Upload card ready */
 #define UP_LD_CARD_RDY                  (0x1U << 1)
 /* Card Control Registers : Download card ready */
 #define DN_LD_CARD_RDY                  (0x1U << 0)

 /* Card Control Registers : Host interrupt mask register */
 #define HOST_INTERRUPT_MASK_REG         0x34
 /* Card Control Registers : Host power interrupt mask */
 #define HOST_POWER_INT_MASK             (0x1U << 3)
 /* Card Control Registers : Abort card interrupt mask */
 #define ABORT_CARD_INT_MASK             (0x1U << 2)
 /* Card Control Registers : Upload card interrupt mask */
 #define UP_LD_CARD_INT_MASK             (0x1U << 1)
 /* Card Control Registers : Download card interrupt mask */
 #define DN_LD_CARD_INT_MASK             (0x1U << 0)

 /* Card Control Registers : Card interrupt status register */
 #define CARD_INTERRUPT_STATUS_REG       0x38
 /* Card Control Registers : Power up interrupt */
 #define POWER_UP_INT                    (0x1U << 4)
 /* Card Control Registers : Power down interrupt */
 #define POWER_DOWN_INT                  (0x1U << 3)

 /* Card Control Registers : Card interrupt RSR register */
 #define CARD_INTERRUPT_RSR_REG          0x3c
 /* Card Control Registers : Power up RSR */
 #define POWER_UP_RSR                    (0x1U << 4)
 /* Card Control Registers : Power down RSR */
 #define POWER_DOWN_RSR                  (0x1U << 3)

 /* Card Control Registers : Miscellaneous Configuration Register */
 #define CARD_MISC_CFG_REG               0x6C

 /* Host F1 read base 0 */
 #define HOST_F1_RD_BASE_0		0x0040
 /* Host F1 read base 1 */
 #define HOST_F1_RD_BASE_1		0x0041
 /* Host F1 card ready */
 #define HOST_F1_CARD_RDY		0x0020

 /* Firmware status 0 register */
 #define CARD_FW_STATUS0_REG		0x60
 /* Firmware status 1 register */
 #define CARD_FW_STATUS1_REG		0x61
 /* Rx length register */
 #define CARD_RX_LEN_REG			0x62
 /* Rx unit register */
 #define CARD_RX_UNIT_REG		0x63

 /* Event header Len*/
 #define MWIFIEX_EVENT_HEADER_LEN           8

 /* Max retry number of CMD53 write */
 #define MAX_WRITE_IOMEM_RETRY		2

 /* SDIO Tx aggregation in progress ? */
 #define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0)

 /* SDIO Tx aggregation buffer room for next packet ? */
 #define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len)	\
 						<= a->mpa_tx.buf_size)

 /* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */
 #define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do {		\
 	memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len],			\
 			payload, pkt_len);				\
 	a->mpa_tx.buf_len += pkt_len;					\
 	if (!a->mpa_tx.pkt_cnt)						\
 		a->mpa_tx.start_port = port;				\
 	if (a->mpa_tx.start_port <= port)				\
 		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt));		\
 	else								\
 		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT -	\
 						a->mp_end_port)));	\
 	a->mpa_tx.pkt_cnt++;						\
 } while (0);

 /* SDIO Tx aggregation limit ? */
 #define MP_TX_AGGR_PKT_LIMIT_REACHED(a)					\
 			(a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit)

 /* SDIO Tx aggregation port limit ? */
 #define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port <		\
 			a->mpa_tx.start_port) && (((MAX_PORT -		\
 			a->mpa_tx.start_port) + a->curr_wr_port) >=	\
 				SDIO_MP_AGGR_DEF_PKT_LIMIT))

 /* Reset SDIO Tx aggregation buffer parameters */
 #define MP_TX_AGGR_BUF_RESET(a) do {					\
 	a->mpa_tx.pkt_cnt = 0;						\
 	a->mpa_tx.buf_len = 0;						\
 	a->mpa_tx.ports = 0;						\
 	a->mpa_tx.start_port = 0;					\
 } while (0);

 /* SDIO Rx aggregation limit ? */
 #define MP_RX_AGGR_PKT_LIMIT_REACHED(a)					\
 			(a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit)

 /* SDIO Tx aggregation port limit ? */
 #define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port <		\
 			a->mpa_rx.start_port) && (((MAX_PORT -		\
 			a->mpa_rx.start_port) + a->curr_rd_port) >=	\
 			SDIO_MP_AGGR_DEF_PKT_LIMIT))

 /* SDIO Rx aggregation in progress ? */
 #define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)

 /* SDIO Rx aggregation buffer room for next packet ? */
 #define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len)				\
 			((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size)

 /* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
 #define MP_RX_AGGR_SETUP(a, skb, port) do {				\
 	a->mpa_rx.buf_len += skb->len;					\
 	if (!a->mpa_rx.pkt_cnt)						\
 		a->mpa_rx.start_port = port;				\
 	if (a->mpa_rx.start_port <= port)				\
 		a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt));		\
 	else								\
 		a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt+1));		\
 	a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb;			\
 	a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len;		\
 	a->mpa_rx.pkt_cnt++;						\
 } while (0);

 /* Reset SDIO Rx aggregation buffer parameters */
 #define MP_RX_AGGR_BUF_RESET(a) do {					\
 	a->mpa_rx.pkt_cnt = 0;						\
 	a->mpa_rx.buf_len = 0;						\
 	a->mpa_rx.ports = 0;						\
 	a->mpa_rx.start_port = 0;					\
 } while (0);


 /* data structure for SDIO MPA TX */
 struct mwifiex_sdio_mpa_tx {
 	/* multiport tx aggregation buffer pointer */
 	u8 *buf;
 	u32 buf_len;
 	u32 pkt_cnt;
 	u16 ports;
 	u16 start_port;
 	u8 enabled;
 	u32 buf_size;
 	u32 pkt_aggr_limit;
 };

 struct mwifiex_sdio_mpa_rx {
 	u8 *buf;
 	u32 buf_len;
 	u32 pkt_cnt;
 	u16 ports;
 	u16 start_port;

 	struct sk_buff *skb_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
 	u32 len_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];

 	u8 enabled;
 	u32 buf_size;
 	u32 pkt_aggr_limit;
 };

 int mwifiex_bus_register(void);
 void mwifiex_bus_unregister(void);

 struct sdio_mmc_card {
 	struct sdio_func *func;
 	struct mwifiex_adapter *adapter;

 	u16 mp_rd_bitmap;
 	u16 mp_wr_bitmap;

 	u16 mp_end_port;
 	u16 mp_data_port_mask;

 	u8 curr_rd_port;
 	u8 curr_wr_port;

 	u8 *mp_regs;

 	struct mwifiex_sdio_mpa_tx mpa_tx;
 	struct mwifiex_sdio_mpa_rx mpa_rx;
 };
 #endif /* _MWIFIEX_SDIO_H */
	/*
	* Marvell Wireless LAN device driver: SDIO specific definitions
	*
	* Copyright (C) 2011, Marvell International Ltd.
	*
	* This software file (the "File") is distributed by Marvell International
	* Ltd. under the terms of the GNU General Public License Version 2, June 1991
	* (the "License"). You may use, redistribute and/or modify this File in
	* accordance with the terms and conditions of the License, a copy of which
	* is available by writing to the Free Software Foundation, Inc.,
	* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
	* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
	*
	* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
	* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
	* this warranty disclaimer.
	*/

	#ifndef _MWIFIEX_SDIO_H
	#define _MWIFIEX_SDIO_H


	#include <linux/mmc/sdio.h>
	#include <linux/mmc/sdio_ids.h>
	#include <linux/mmc/sdio_func.h>
	#include <linux/mmc/card.h>

	#include "main.h"

	#define BLOCK_MODE 1
	#define BYTE_MODE 0

	#define REG_PORT 0
	#define RD_BITMAP_L 0x04
	#define RD_BITMAP_U 0x05
	#define WR_BITMAP_L 0x06
	#define WR_BITMAP_U 0x07
	#define RD_LEN_P0_L 0x08
	#define RD_LEN_P0_U 0x09

	#define MWIFIEX_SDIO_IO_PORT_MASK 0xfffff

	#define MWIFIEX_SDIO_BYTE_MODE_MASK 0x80000000

	#define CTRL_PORT 0
	#define CTRL_PORT_MASK 0x0001
	#define DATA_PORT_MASK 0xfffe

	#define MAX_MP_REGS 64
	#define MAX_PORT 16

	#define SDIO_MP_AGGR_DEF_PKT_LIMIT 8

	#define SDIO_MP_TX_AGGR_DEF_BUF_SIZE (4096) /* 4K */

	/* Multi port RX aggregation buffer size */
	#define SDIO_MP_RX_AGGR_DEF_BUF_SIZE (4096) /* 4K */

	/* Misc. Config Register : Auto Re-enable interrupts */
	#define AUTO_RE_ENABLE_INT BIT(4)

	/* Host Control Registers */
	/* Host Control Registers : I/O port 0 */
	#define IO_PORT_0_REG 0x78
	/* Host Control Registers : I/O port 1 */
	#define IO_PORT_1_REG 0x79
	/* Host Control Registers : I/O port 2 */
	#define IO_PORT_2_REG 0x7A

	/* Host Control Registers : Configuration */
	#define CONFIGURATION_REG 0x00
	/* Host Control Registers : Host without Command 53 finish host*/
	#define HOST_TO_CARD_EVENT (0x1U << 3)
	/* Host Control Registers : Host without Command 53 finish host */
	#define HOST_WO_CMD53_FINISH_HOST (0x1U << 2)
	/* Host Control Registers : Host power up */
	#define HOST_POWER_UP (0x1U << 1)
	/* Host Control Registers : Host power down */
	#define HOST_POWER_DOWN (0x1U << 0)

	/* Host Control Registers : Host interrupt mask */
	#define HOST_INT_MASK_REG 0x02
	/* Host Control Registers : Upload host interrupt mask */
	#define UP_LD_HOST_INT_MASK (0x1U)
	/* Host Control Registers : Download host interrupt mask */
	#define DN_LD_HOST_INT_MASK (0x2U)
	/* Enable Host interrupt mask */
	#define HOST_INT_ENABLE (UP_LD_HOST_INT_MASK \| DN_LD_HOST_INT_MASK)
	/* Disable Host interrupt mask */
	#define HOST_INT_DISABLE 0xff

	/* Host Control Registers : Host interrupt status */
	#define HOST_INTSTATUS_REG 0x03
	/* Host Control Registers : Upload host interrupt status */
	#define UP_LD_HOST_INT_STATUS (0x1U)
	/* Host Control Registers : Download host interrupt status */
	#define DN_LD_HOST_INT_STATUS (0x2U)

	/* Host Control Registers : Host interrupt RSR */
	#define HOST_INT_RSR_REG 0x01
	/* Host Control Registers : Upload host interrupt RSR */
	#define UP_LD_HOST_INT_RSR (0x1U)
	#define SDIO_INT_MASK 0x3F

	/* Host Control Registers : Host interrupt status */
	#define HOST_INT_STATUS_REG 0x28
	/* Host Control Registers : Upload CRC error */
	#define UP_LD_CRC_ERR (0x1U << 2)
	/* Host Control Registers : Upload restart */
	#define UP_LD_RESTART (0x1U << 1)
	/* Host Control Registers : Download restart */
	#define DN_LD_RESTART (0x1U << 0)

	/* Card Control Registers : Card status register */
	#define CARD_STATUS_REG 0x30
	/* Card Control Registers : Card I/O ready */
	#define CARD_IO_READY (0x1U << 3)
	/* Card Control Registers : CIS card ready */
	#define CIS_CARD_RDY (0x1U << 2)
	/* Card Control Registers : Upload card ready */
	#define UP_LD_CARD_RDY (0x1U << 1)
	/* Card Control Registers : Download card ready */
	#define DN_LD_CARD_RDY (0x1U << 0)

	/* Card Control Registers : Host interrupt mask register */
	#define HOST_INTERRUPT_MASK_REG 0x34
	/* Card Control Registers : Host power interrupt mask */
	#define HOST_POWER_INT_MASK (0x1U << 3)
	/* Card Control Registers : Abort card interrupt mask */
	#define ABORT_CARD_INT_MASK (0x1U << 2)
	/* Card Control Registers : Upload card interrupt mask */
	#define UP_LD_CARD_INT_MASK (0x1U << 1)
	/* Card Control Registers : Download card interrupt mask */
	#define DN_LD_CARD_INT_MASK (0x1U << 0)

	/* Card Control Registers : Card interrupt status register */
	#define CARD_INTERRUPT_STATUS_REG 0x38
	/* Card Control Registers : Power up interrupt */
	#define POWER_UP_INT (0x1U << 4)
	/* Card Control Registers : Power down interrupt */
	#define POWER_DOWN_INT (0x1U << 3)

	/* Card Control Registers : Card interrupt RSR register */
	#define CARD_INTERRUPT_RSR_REG 0x3c
	/* Card Control Registers : Power up RSR */
	#define POWER_UP_RSR (0x1U << 4)
	/* Card Control Registers : Power down RSR */
	#define POWER_DOWN_RSR (0x1U << 3)

	/* Card Control Registers : Miscellaneous Configuration Register */
	#define CARD_MISC_CFG_REG 0x6C

	/* Host F1 read base 0 */
	#define HOST_F1_RD_BASE_0 0x0040
	/* Host F1 read base 1 */
	#define HOST_F1_RD_BASE_1 0x0041
	/* Host F1 card ready */
	#define HOST_F1_CARD_RDY 0x0020

	/* Firmware status 0 register */
	#define CARD_FW_STATUS0_REG 0x60
	/* Firmware status 1 register */
	#define CARD_FW_STATUS1_REG 0x61
	/* Rx length register */
	#define CARD_RX_LEN_REG 0x62
	/* Rx unit register */
	#define CARD_RX_UNIT_REG 0x63

	/* Event header Len*/
	#define MWIFIEX_EVENT_HEADER_LEN 8

	/* Max retry number of CMD53 write */
	#define MAX_WRITE_IOMEM_RETRY 2

	/* SDIO Tx aggregation in progress ? */
	#define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0)

	/* SDIO Tx aggregation buffer room for next packet ? */
	#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len) \
	<= a->mpa_tx.buf_size)

	/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */
	#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do { \
	memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len], \
	payload, pkt_len); \
	a->mpa_tx.buf_len += pkt_len; \
	if (!a->mpa_tx.pkt_cnt) \
	a->mpa_tx.start_port = port; \
	if (a->mpa_tx.start_port <= port) \
	a->mpa_tx.ports \|= (1<<(a->mpa_tx.pkt_cnt)); \
	else \
	a->mpa_tx.ports \|= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT - \
	a->mp_end_port))); \
	a->mpa_tx.pkt_cnt++; \
	} while (0);

	/* SDIO Tx aggregation limit ? */
	#define MP_TX_AGGR_PKT_LIMIT_REACHED(a) \
	(a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit)

	/* SDIO Tx aggregation port limit ? */
	#define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port < \
	a->mpa_tx.start_port) && (((MAX_PORT - \
	a->mpa_tx.start_port) + a->curr_wr_port) >= \
	SDIO_MP_AGGR_DEF_PKT_LIMIT))

	/* Reset SDIO Tx aggregation buffer parameters */
	#define MP_TX_AGGR_BUF_RESET(a) do { \
	a->mpa_tx.pkt_cnt = 0; \
	a->mpa_tx.buf_len = 0; \
	a->mpa_tx.ports = 0; \
	a->mpa_tx.start_port = 0; \
	} while (0);

	/* SDIO Rx aggregation limit ? */
	#define MP_RX_AGGR_PKT_LIMIT_REACHED(a) \
	(a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit)

	/* SDIO Tx aggregation port limit ? */
	#define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port < \
	a->mpa_rx.start_port) && (((MAX_PORT - \
	a->mpa_rx.start_port) + a->curr_rd_port) >= \
	SDIO_MP_AGGR_DEF_PKT_LIMIT))

	/* SDIO Rx aggregation in progress ? */
	#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)

	/* SDIO Rx aggregation buffer room for next packet ? */
	#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len) \
	((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size)

	/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
	#define MP_RX_AGGR_SETUP(a, skb, port) do { \
	a->mpa_rx.buf_len += skb->len; \
	if (!a->mpa_rx.pkt_cnt) \
	a->mpa_rx.start_port = port; \
	if (a->mpa_rx.start_port <= port) \
	a->mpa_rx.ports \|= (1<<(a->mpa_rx.pkt_cnt)); \
	else \
	a->mpa_rx.ports \|= (1<<(a->mpa_rx.pkt_cnt+1)); \
	a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb; \
	a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len; \
	a->mpa_rx.pkt_cnt++; \
	} while (0);

	/* Reset SDIO Rx aggregation buffer parameters */
	#define MP_RX_AGGR_BUF_RESET(a) do { \
	a->mpa_rx.pkt_cnt = 0; \
	a->mpa_rx.buf_len = 0; \
	a->mpa_rx.ports = 0; \
	a->mpa_rx.start_port = 0; \
	} while (0);


	/* data structure for SDIO MPA TX */
	struct mwifiex_sdio_mpa_tx {
	/* multiport tx aggregation buffer pointer */
	u8 *buf;
	u32 buf_len;
	u32 pkt_cnt;
	u16 ports;
	u16 start_port;
	u8 enabled;
	u32 buf_size;
	u32 pkt_aggr_limit;
	};

	struct mwifiex_sdio_mpa_rx {
	u8 *buf;
	u32 buf_len;
	u32 pkt_cnt;
	u16 ports;
	u16 start_port;

	struct sk_buff *skb_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
	u32 len_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];

	u8 enabled;
	u32 buf_size;
	u32 pkt_aggr_limit;
	};

	int mwifiex_bus_register(void);
	void mwifiex_bus_unregister(void);

	struct sdio_mmc_card {
	struct sdio_func *func;
	struct mwifiex_adapter *adapter;

	u16 mp_rd_bitmap;
	u16 mp_wr_bitmap;

	u16 mp_end_port;
	u16 mp_data_port_mask;

	u8 curr_rd_port;
	u8 curr_wr_port;

	u8 *mp_regs;

	struct mwifiex_sdio_mpa_tx mpa_tx;
	struct mwifiex_sdio_mpa_rx mpa_rx;
	};
	#endif /* _MWIFIEX_SDIO_H */