[SCSI] qla2xxx: Increase speed of flash access in ISP82xx adapters to improve firmware load speed.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 0a2f2d5..b0df7da 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -908,27 +908,37 @@
return 0;
}
+int
+qla82xx_md_rw_32(struct qla_hw_data *ha, uint32_t off, u32 data, uint8_t flag)
+{
+ uint32_t off_value, rval = 0;
+
+ WRT_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase),
+ (off & 0xFFFF0000));
+
+ /* Read back value to make sure write has gone through */
+ RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase));
+ off_value = (off & 0x0000FFFF);
+
+ if (flag)
+ WRT_REG_DWORD((void *)
+ (off_value + CRB_INDIRECT_2M + ha->nx_pcibase),
+ data);
+ else
+ rval = RD_REG_DWORD((void *)
+ (off_value + CRB_INDIRECT_2M + ha->nx_pcibase));
+
+ return rval;
+}
+
static int
qla82xx_do_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp)
{
- scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
+ /* Dword reads to flash. */
+ qla82xx_md_rw_32(ha, MD_DIRECT_ROM_WINDOW, (addr & 0xFFFF0000), 1);
+ *valp = qla82xx_md_rw_32(ha, MD_DIRECT_ROM_READ_BASE +
+ (addr & 0x0000FFFF), 0, 0);
- qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, addr);
- qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
- qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3);
- qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, 0xb);
- qla82xx_wait_rom_busy(ha);
- if (qla82xx_wait_rom_done(ha)) {
- ql_log(ql_log_fatal, vha, 0x00ba,
- "Error waiting for rom done.\n");
- return -1;
- }
- /* Reset abyte_cnt and dummy_byte_cnt */
- qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
- udelay(10);
- cond_resched();
- qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0);
- *valp = qla82xx_rd_32(ha, QLA82XX_ROMUSB_ROM_RDATA);
return 0;
}
@@ -3639,29 +3649,6 @@
}
/* Minidump related functions */
-int
-qla82xx_md_rw_32(struct qla_hw_data *ha, uint32_t off, u32 data, uint8_t flag)
-{
- uint32_t off_value, rval = 0;
-
- WRT_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase),
- (off & 0xFFFF0000));
-
- /* Read back value to make sure write has gone through */
- RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase));
- off_value = (off & 0x0000FFFF);
-
- if (flag)
- WRT_REG_DWORD((void *)
- (off_value + CRB_INDIRECT_2M + ha->nx_pcibase),
- data);
- else
- rval = RD_REG_DWORD((void *)
- (off_value + CRB_INDIRECT_2M + ha->nx_pcibase));
-
- return rval;
-}
-
static int
qla82xx_minidump_process_control(scsi_qla_host_t *vha,
qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)