| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /dts-v1/; |
| #include "imx53.dtsi" |
| |
| / { |
| model = "Freescale i.MX53 Automotive Reference Design Board"; |
| compatible = "fsl,imx53-ard", "fsl,imx53"; |
| |
| memory { |
| reg = <0x70000000 0x40000000>; |
| }; |
| |
| eim-cs1@f4000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,eim-bus", "simple-bus"; |
| reg = <0xf4000000 0x3ff0000>; |
| ranges; |
| |
| lan9220@f4000000 { |
| compatible = "smsc,lan9220", "smsc,lan9115"; |
| reg = <0xf4000000 0x2000000>; |
| phy-mode = "mii"; |
| interrupt-parent = <&gpio2>; |
| interrupts = <31 0x8>; |
| reg-io-width = <4>; |
| /* |
| * VDD33A and VDDVARIO of LAN9220 are supplied by |
| * SW4_3V3 of LTC3589. Before the regulator driver |
| * for this PMIC is available, we use a fixed dummy |
| * 3V3 regulator to get LAN9220 driver probing work. |
| */ |
| vdd33a-supply = <®_3p3v>; |
| vddvario-supply = <®_3p3v>; |
| smsc,irq-push-pull; |
| }; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_3p3v: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <0>; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| home { |
| label = "Home"; |
| gpios = <&gpio5 10 0>; |
| linux,code = <102>; /* KEY_HOME */ |
| gpio-key,wakeup; |
| }; |
| |
| back { |
| label = "Back"; |
| gpios = <&gpio5 11 0>; |
| linux,code = <158>; /* KEY_BACK */ |
| gpio-key,wakeup; |
| }; |
| |
| program { |
| label = "Program"; |
| gpios = <&gpio5 12 0>; |
| linux,code = <362>; /* KEY_PROGRAM */ |
| gpio-key,wakeup; |
| }; |
| |
| volume-up { |
| label = "Volume Up"; |
| gpios = <&gpio5 13 0>; |
| linux,code = <115>; /* KEY_VOLUMEUP */ |
| }; |
| |
| volume-down { |
| label = "Volume Down"; |
| gpios = <&gpio4 0 0>; |
| linux,code = <114>; /* KEY_VOLUMEDOWN */ |
| }; |
| }; |
| }; |
| |
| &esdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc1>; |
| cd-gpios = <&gpio1 1 0>; |
| wp-gpios = <&gpio1 9 0>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| imx53-ard { |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX53_PAD_GPIO_1__GPIO1_1 0x80000000 |
| MX53_PAD_GPIO_9__GPIO1_9 0x80000000 |
| MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 |
| MX53_PAD_GPIO_10__GPIO4_0 0x80000000 |
| MX53_PAD_DISP0_DAT16__GPIO5_10 0x80000000 |
| MX53_PAD_DISP0_DAT17__GPIO5_11 0x80000000 |
| MX53_PAD_DISP0_DAT18__GPIO5_12 0x80000000 |
| MX53_PAD_DISP0_DAT19__GPIO5_13 0x80000000 |
| MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x80000000 |
| MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x80000000 |
| MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x80000000 |
| MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x80000000 |
| MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x80000000 |
| MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x80000000 |
| MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x80000000 |
| MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x80000000 |
| MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x80000000 |
| MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x80000000 |
| MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x80000000 |
| MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x80000000 |
| MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x80000000 |
| MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x80000000 |
| MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x80000000 |
| MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x80000000 |
| MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000 |
| MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000 |
| MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000 |
| MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000 |
| MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000 |
| MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000 |
| MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000 |
| MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000 |
| MX53_PAD_EIM_RW__EMI_WEIM_RW 0x80000000 |
| MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000 |
| >; |
| }; |
| |
| pinctrl_esdhc1: esdhc1grp { |
| fsl,pins = < |
| MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 |
| MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 |
| MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 |
| MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 |
| MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5 |
| MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5 |
| MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5 |
| MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5 |
| MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 |
| MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 |
| MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 |
| >; |
| }; |
| }; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |