| /* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/spmi/spmi.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| &spmi_bus { |
| pm660_0: qcom,pm660@0 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x0 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| pm660_revid: qcom,revid@100 { |
| compatible = "qcom,qpnp-revid"; |
| reg = <0x100 0x100>; |
| qcom,fab-id-valid; |
| }; |
| |
| pm660_misc: qcom,misc@900 { |
| compatible = "qcom,qpnp-misc"; |
| reg = <0x900 0x100>; |
| }; |
| |
| qcom,power-on@800 { |
| compatible = "qcom,qpnp-power-on"; |
| reg = <0x800 0x100>; |
| interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>, |
| <0x0 0x8 0x1 IRQ_TYPE_NONE>, |
| <0x0 0x8 0x4 IRQ_TYPE_NONE>, |
| <0x0 0x8 0x5 IRQ_TYPE_NONE>; |
| interrupt-names = "kpdpwr", "resin", |
| "resin-bark", "kpdpwr-resin-bark"; |
| qcom,pon-dbc-delay = <15625>; |
| qcom,kpdpwr-sw-debounce; |
| qcom,system-reset; |
| qcom,store-hard-reset-reason; |
| |
| qcom,pon_1 { |
| qcom,pon-type = <0>; |
| qcom,pull-up = <1>; |
| linux,code = <116>; |
| }; |
| |
| qcom,pon_2 { |
| qcom,pon-type = <1>; |
| qcom,pull-up = <1>; |
| linux,code = <114>; |
| }; |
| }; |
| |
| pm660_tz: qcom,temp-alarm@2400 { |
| compatible = "qcom,qpnp-temp-alarm"; |
| reg = <0x2400 0x100>; |
| interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; |
| label = "pm660_tz"; |
| qcom,channel-num = <6>; |
| qcom,temp_alarm-vadc = <&pm660_vadc>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| pm660_gpios: pinctrl@c000 { |
| compatible = "qcom,spmi-gpio"; |
| reg = <0xc000 0xd00>; |
| interrupts = <0x0 0xc1 0 IRQ_TYPE_NONE>, |
| <0x0 0xc2 0 IRQ_TYPE_NONE>, |
| <0x0 0xc3 0 IRQ_TYPE_NONE>, |
| <0x0 0xc8 0 IRQ_TYPE_NONE>, |
| <0x0 0xca 0 IRQ_TYPE_NONE>, |
| <0x0 0xcb 0 IRQ_TYPE_NONE>, |
| <0x0 0xcc 0 IRQ_TYPE_NONE>; |
| interrupt-names = "pm660_gpio2", "pm660_gpio3", |
| "pm660_gpio4", "pm660_gpio9", |
| "pm660_gpio11", "pm660_gpio12", |
| "pm660_gpio13"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| qcom,gpios-disallowed = <1 5 6 7 8 10>; |
| }; |
| |
| pm660_coincell: qcom,coincell@2800 { |
| compatible = "qcom,qpnp-coincell"; |
| reg = <0x2800 0x100>; |
| }; |
| |
| pm660_rtc: qcom,pm660_rtc { |
| compatible = "qcom,qpnp-rtc"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,qpnp-rtc-write = <0>; |
| qcom,qpnp-rtc-alarm-pwrup = <0>; |
| |
| qcom,pm660_rtc_rw@6000 { |
| reg = <0x6000 0x100>; |
| }; |
| qcom,pm660_rtc_alarm@6100 { |
| reg = <0x6100 0x100>; |
| interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; |
| }; |
| }; |
| |
| pm660_vadc: vadc@3100 { |
| compatible = "qcom,qpnp-vadc-hc"; |
| reg = <0x3100 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "eoc-int-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1875>; |
| |
| chan@6 { |
| label = "die_temp"; |
| reg = <6>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <3>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| qcom,cal-val = <0>; |
| }; |
| |
| chan@0 { |
| label = "ref_gnd"; |
| reg = <0>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| qcom,cal-val = <0>; |
| }; |
| |
| chan@1 { |
| label = "ref_1250v"; |
| reg = <1>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| qcom,cal-val = <0>; |
| }; |
| |
| chan@83 { |
| label = "vph_pwr"; |
| reg = <0x83>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@85 { |
| label = "vcoin"; |
| reg = <0x85>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@4c { |
| label = "xo_therm"; |
| reg = <0x4c>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@4d { |
| label = "msm_therm"; |
| reg = <0x4d>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@51 { |
| label = "quiet_therm"; |
| reg = <0x51>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@4e { |
| label = "emmc_therm"; |
| reg = <0x4e>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@4f { |
| label = "pa_therm0"; |
| reg = <0x4f>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@1d { |
| label = "drax_temp"; |
| reg = <0x1d>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <3>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| qcom,cal-val = <0>; |
| }; |
| }; |
| |
| pm660_pdphy: qcom,usb-pdphy@1700 { |
| compatible = "qcom,qpnp-pdphy"; |
| reg = <0x1700 0x100>; |
| vdd-pdphy-supply = <&pm660l_l7>; |
| vbus-supply = <0>; |
| vconn-supply = <0>; |
| interrupts = <0x0 0x17 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x17 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x17 0x2 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x17 0x3 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x17 0x4 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x17 0x5 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x17 0x6 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "sig-tx", |
| "sig-rx", |
| "msg-tx", |
| "msg-rx", |
| "msg-tx-failed", |
| "msg-tx-discarded", |
| "msg-rx-discarded"; |
| |
| qcom,default-sink-caps = <5000 3000>, /* 5V @ 3A */ |
| <9000 3000>; /* 9V @ 3A */ |
| }; |
| |
| pm660_adc_tm: vadc@3400 { |
| compatible = "qcom,qpnp-adc-tm-hc"; |
| reg = <0x3400 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "eoc-int-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1875>; |
| qcom,adc_tm-vadc = <&pm660_vadc>; |
| qcom,decimation = <0>; |
| qcom,fast-avg-setup = <0>; |
| #thermal-sensor-cells = <1>; |
| |
| chan@83 { |
| label = "vph_pwr"; |
| reg = <0x83>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,btm-channel-number = <0x60>; |
| }; |
| |
| chan@4d { |
| label = "msm_therm"; |
| reg = <0x4d>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,btm-channel-number = <0x68>; |
| qcom,thermal-node; |
| }; |
| |
| chan@51 { |
| label = "quiet_therm"; |
| reg = <0x51>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,btm-channel-number = <0x70>; |
| qcom,thermal-node; |
| }; |
| |
| chan@4c { |
| label = "xo_therm"; |
| reg = <0x4c>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <2>; |
| qcom,btm-channel-number = <0x78>; |
| qcom,thermal-node; |
| }; |
| |
| chan@4e { |
| label = "emmc_therm"; |
| reg = <0x4e>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,btm-channel-number = <0x80>; |
| qcom,thermal-node; |
| }; |
| |
| chan@4f { |
| label = "pa_therm0"; |
| reg = <0x4f>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,btm-channel-number = <0x88>; |
| qcom,thermal-node; |
| }; |
| }; |
| |
| bcl_sensor: bcl@4200 { |
| compatible = "qcom,msm-bcl-lmh"; |
| reg = <0x4200 0xff>, |
| <0x4300 0xff>; |
| reg-names = "fg_user_adc", |
| "fg_lmh"; |
| interrupts = <0x0 0x42 0x0 IRQ_TYPE_NONE>, |
| <0x0 0x42 0x1 IRQ_TYPE_NONE>, |
| <0x0 0x42 0x2 IRQ_TYPE_NONE>, |
| <0x0 0x42 0x3 IRQ_TYPE_NONE>, |
| <0x0 0x42 0x4 IRQ_TYPE_NONE>; |
| interrupt-names = "bcl-high-ibat", |
| "bcl-very-high-ibat", |
| "bcl-low-vbat", |
| "bcl-very-low-vbat", |
| "bcl-crit-low-vbat"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| pm660_div_clk: qcom,clkdiv@5b00 { |
| compatible = "qcom,qpnp-clkdiv"; |
| reg = <0x5b00 0x100>; |
| #clock-cells = <1>; |
| qcom,cxo-freq = <19200000>; |
| qcom,clkdiv-id = <1>; |
| qcom,clkdiv-init-freq = <19200000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pm660_1: qcom,pm660@1 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x1 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| &thermal_zones { |
| xo-therm-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm660_adc_tm 0x4c>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| msm-therm-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm660_adc_tm 0x4d>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| emmc-therm-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm660_adc_tm 0x4e>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| pa-therm0-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm660_adc_tm 0x4f>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| quiet-therm-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm660_adc_tm 0x51>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| ibat-high { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "step_wise"; |
| thermal-sensors = <&bcl_sensor 0>; |
| |
| trips { |
| ibat-high { |
| temperature = <4200>; |
| hysteresis = <200>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| ibat-vhigh { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "step_wise"; |
| thermal-sensors = <&bcl_sensor 1>; |
| |
| trips { |
| ibat-vhigh { |
| temperature = <4300>; |
| hysteresis = <100>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| vbat_adc { |
| polling-delay-passive = <100>; |
| polling-delay = <0>; |
| thermal-governor = "low_limits_cap"; |
| thermal-sensors = <&bcl_sensor 2>; |
| tracks-low; |
| |
| trips { |
| pm660_vbat_adc: vbat-adc { |
| temperature = <3300>; |
| hysteresis = <100>; |
| type = "passive"; |
| }; |
| }; |
| cooling-maps { |
| vbat_map6 { |
| trip = <&pm660_vbat_adc>; |
| cooling-device = |
| <&CPU6 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| vbat_map7 { |
| trip = <&pm660_vbat_adc>; |
| cooling-device = |
| <&CPU7 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| }; |
| }; |
| |
| vbat_low { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "low_limits_cap"; |
| thermal-sensors = <&bcl_sensor 3>; |
| tracks-low; |
| |
| trips { |
| vbat-low { |
| temperature = <3100>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| vbat_too_low { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "low_limits_cap"; |
| thermal-sensors = <&bcl_sensor 4>; |
| tracks-low; |
| |
| trips { |
| vbat-too-low { |
| temperature = <2900>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| soc { |
| polling-delay-passive = <100>; |
| polling-delay = <0>; |
| thermal-governor = "low_limits_cap"; |
| thermal-sensors = <&bcl_sensor 5>; |
| tracks-low; |
| |
| trips { |
| pm660_low_soc: low-soc { |
| temperature = <10>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| cooling-maps { |
| soc_map6 { |
| trip = <&pm660_low_soc>; |
| cooling-device = |
| <&CPU6 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| soc_map7 { |
| trip = <&pm660_low_soc>; |
| cooling-device = |
| <&CPU7 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| }; |
| }; |
| |
| pm660_temp_alarm: pm660_tz { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "step_wise"; |
| thermal-sensors = <&pm660_tz>; |
| |
| trips { |
| pm660_trip0: pm660-trip0 { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| pm660_trip1: pm660-trip1 { |
| temperature = <125000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| pm660_trip2: pm660-trip2 { |
| temperature = <145000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| cooling-maps { |
| trip0_cpu0 { |
| trip = <&pm660_trip0>; |
| cooling-device = |
| <&CPU0 (THERMAL_MAX_LIMIT-1) |
| (THERMAL_MAX_LIMIT-1)>; |
| }; |
| trip0_cpu1 { |
| trip = <&pm660_trip0>; |
| cooling-device = |
| <&CPU1 (THERMAL_MAX_LIMIT-1) |
| (THERMAL_MAX_LIMIT-1)>; |
| }; |
| trip0_cpu2 { |
| trip = <&pm660_trip0>; |
| cooling-device = |
| <&CPU2 (THERMAL_MAX_LIMIT-1) |
| (THERMAL_MAX_LIMIT-1)>; |
| }; |
| trip0_cpu3 { |
| trip = <&pm660_trip0>; |
| cooling-device = |
| <&CPU3 (THERMAL_MAX_LIMIT-1) |
| (THERMAL_MAX_LIMIT-1)>; |
| }; |
| trip0_cpu4 { |
| trip = <&pm660_trip0>; |
| cooling-device = |
| <&CPU4 (THERMAL_MAX_LIMIT-1) |
| (THERMAL_MAX_LIMIT-1)>; |
| }; |
| trip0_cpu5 { |
| trip = <&pm660_trip0>; |
| cooling-device = |
| <&CPU5 (THERMAL_MAX_LIMIT-1) |
| (THERMAL_MAX_LIMIT-1)>; |
| }; |
| trip0_cpu6 { |
| trip = <&pm660_trip0>; |
| cooling-device = |
| <&CPU6 (THERMAL_MAX_LIMIT-1) |
| (THERMAL_MAX_LIMIT-1)>; |
| }; |
| trip0_cpu7 { |
| trip = <&pm660_trip0>; |
| cooling-device = |
| <&CPU7 (THERMAL_MAX_LIMIT-1) |
| (THERMAL_MAX_LIMIT-1)>; |
| }; |
| trip1_cpu1 { |
| trip = <&pm660_trip1>; |
| cooling-device = |
| <&CPU1 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| trip1_cpu2 { |
| trip = <&pm660_trip1>; |
| cooling-device = |
| <&CPU2 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| trip1_cpu3 { |
| trip = <&pm660_trip1>; |
| cooling-device = |
| <&CPU3 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| trip1_cpu4 { |
| trip = <&pm660_trip1>; |
| cooling-device = |
| <&CPU4 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| trip1_cpu5 { |
| trip = <&pm660_trip1>; |
| cooling-device = |
| <&CPU5 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| trip1_cpu6 { |
| trip = <&pm660_trip1>; |
| cooling-device = |
| <&CPU6 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| trip1_cpu7 { |
| trip = <&pm660_trip1>; |
| cooling-device = |
| <&CPU7 THERMAL_MAX_LIMIT |
| THERMAL_MAX_LIMIT>; |
| }; |
| }; |
| }; |
| }; |