| /* |
| * include/asm-s390/pgtable.h |
| * |
| * S390 version |
| * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation |
| * Author(s): Hartmut Penner (hp@de.ibm.com) |
| * Ulrich Weigand (weigand@de.ibm.com) |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) |
| * |
| * Derived from "include/asm-i386/pgtable.h" |
| */ |
| |
| #ifndef _ASM_S390_PGTABLE_H |
| #define _ASM_S390_PGTABLE_H |
| |
| /* |
| * The Linux memory management assumes a three-level page table setup. For |
| * s390 31 bit we "fold" the mid level into the top-level page table, so |
| * that we physically have the same two-level page table as the s390 mmu |
| * expects in 31 bit mode. For s390 64 bit we use three of the five levels |
| * the hardware provides (region first and region second tables are not |
| * used). |
| * |
| * The "pgd_xxx()" functions are trivial for a folded two-level |
| * setup: the pgd is never bad, and a pmd always exists (as it's folded |
| * into the pgd entry) |
| * |
| * This file contains the functions and defines necessary to modify and use |
| * the S390 page table tree. |
| */ |
| #ifndef __ASSEMBLY__ |
| #include <linux/sched.h> |
| #include <linux/mm_types.h> |
| #include <asm/bug.h> |
| #include <asm/page.h> |
| |
| extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096))); |
| extern void paging_init(void); |
| extern void vmem_map_init(void); |
| extern void fault_init(void); |
| |
| /* |
| * The S390 doesn't have any external MMU info: the kernel page |
| * tables contain all the necessary information. |
| */ |
| #define update_mmu_cache(vma, address, ptep) do { } while (0) |
| |
| /* |
| * ZERO_PAGE is a global shared page that is always zero; used |
| * for zero-mapped memory areas etc.. |
| */ |
| |
| extern unsigned long empty_zero_page; |
| extern unsigned long zero_page_mask; |
| |
| #define ZERO_PAGE(vaddr) \ |
| (virt_to_page((void *)(empty_zero_page + \ |
| (((unsigned long)(vaddr)) &zero_page_mask)))) |
| |
| #define is_zero_pfn is_zero_pfn |
| static inline int is_zero_pfn(unsigned long pfn) |
| { |
| extern unsigned long zero_pfn; |
| unsigned long offset_from_zero_pfn = pfn - zero_pfn; |
| return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT); |
| } |
| |
| #define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr)) |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| /* |
| * PMD_SHIFT determines the size of the area a second-level page |
| * table can map |
| * PGDIR_SHIFT determines what a third-level page table entry can map |
| */ |
| #ifndef CONFIG_64BIT |
| # define PMD_SHIFT 20 |
| # define PUD_SHIFT 20 |
| # define PGDIR_SHIFT 20 |
| #else /* CONFIG_64BIT */ |
| # define PMD_SHIFT 20 |
| # define PUD_SHIFT 31 |
| # define PGDIR_SHIFT 42 |
| #endif /* CONFIG_64BIT */ |
| |
| #define PMD_SIZE (1UL << PMD_SHIFT) |
| #define PMD_MASK (~(PMD_SIZE-1)) |
| #define PUD_SIZE (1UL << PUD_SHIFT) |
| #define PUD_MASK (~(PUD_SIZE-1)) |
| #define PGDIR_SIZE (1UL << PGDIR_SHIFT) |
| #define PGDIR_MASK (~(PGDIR_SIZE-1)) |
| |
| /* |
| * entries per page directory level: the S390 is two-level, so |
| * we don't really have any PMD directory physically. |
| * for S390 segment-table entries are combined to one PGD |
| * that leads to 1024 pte per pgd |
| */ |
| #define PTRS_PER_PTE 256 |
| #ifndef CONFIG_64BIT |
| #define PTRS_PER_PMD 1 |
| #define PTRS_PER_PUD 1 |
| #else /* CONFIG_64BIT */ |
| #define PTRS_PER_PMD 2048 |
| #define PTRS_PER_PUD 2048 |
| #endif /* CONFIG_64BIT */ |
| #define PTRS_PER_PGD 2048 |
| |
| #define FIRST_USER_ADDRESS 0 |
| |
| #define pte_ERROR(e) \ |
| printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e)) |
| #define pmd_ERROR(e) \ |
| printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e)) |
| #define pud_ERROR(e) \ |
| printk("%s:%d: bad pud %p.\n", __FILE__, __LINE__, (void *) pud_val(e)) |
| #define pgd_ERROR(e) \ |
| printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e)) |
| |
| #ifndef __ASSEMBLY__ |
| /* |
| * The vmalloc area will always be on the topmost area of the kernel |
| * mapping. We reserve 96MB (31bit) / 128GB (64bit) for vmalloc, |
| * which should be enough for any sane case. |
| * By putting vmalloc at the top, we maximise the gap between physical |
| * memory and vmalloc to catch misplaced memory accesses. As a side |
| * effect, this also makes sure that 64 bit module code cannot be used |
| * as system call address. |
| */ |
| extern unsigned long VMALLOC_START; |
| extern unsigned long VMALLOC_END; |
| extern struct page *vmemmap; |
| |
| #define VMEM_MAX_PHYS ((unsigned long) vmemmap) |
| |
| /* |
| * A 31 bit pagetable entry of S390 has following format: |
| * | PFRA | | OS | |
| * 0 0IP0 |
| * 00000000001111111111222222222233 |
| * 01234567890123456789012345678901 |
| * |
| * I Page-Invalid Bit: Page is not available for address-translation |
| * P Page-Protection Bit: Store access not possible for page |
| * |
| * A 31 bit segmenttable entry of S390 has following format: |
| * | P-table origin | |PTL |
| * 0 IC |
| * 00000000001111111111222222222233 |
| * 01234567890123456789012345678901 |
| * |
| * I Segment-Invalid Bit: Segment is not available for address-translation |
| * C Common-Segment Bit: Segment is not private (PoP 3-30) |
| * PTL Page-Table-Length: Page-table length (PTL+1*16 entries -> up to 256) |
| * |
| * The 31 bit segmenttable origin of S390 has following format: |
| * |
| * |S-table origin | | STL | |
| * X **GPS |
| * 00000000001111111111222222222233 |
| * 01234567890123456789012345678901 |
| * |
| * X Space-Switch event: |
| * G Segment-Invalid Bit: * |
| * P Private-Space Bit: Segment is not private (PoP 3-30) |
| * S Storage-Alteration: |
| * STL Segment-Table-Length: Segment-table length (STL+1*16 entries -> up to 2048) |
| * |
| * A 64 bit pagetable entry of S390 has following format: |
| * | PFRA |0IPC| OS | |
| * 0000000000111111111122222222223333333333444444444455555555556666 |
| * 0123456789012345678901234567890123456789012345678901234567890123 |
| * |
| * I Page-Invalid Bit: Page is not available for address-translation |
| * P Page-Protection Bit: Store access not possible for page |
| * C Change-bit override: HW is not required to set change bit |
| * |
| * A 64 bit segmenttable entry of S390 has following format: |
| * | P-table origin | TT |
| * 0000000000111111111122222222223333333333444444444455555555556666 |
| * 0123456789012345678901234567890123456789012345678901234567890123 |
| * |
| * I Segment-Invalid Bit: Segment is not available for address-translation |
| * C Common-Segment Bit: Segment is not private (PoP 3-30) |
| * P Page-Protection Bit: Store access not possible for page |
| * TT Type 00 |
| * |
| * A 64 bit region table entry of S390 has following format: |
| * | S-table origin | TF TTTL |
| * 0000000000111111111122222222223333333333444444444455555555556666 |
| * 0123456789012345678901234567890123456789012345678901234567890123 |
| * |
| * I Segment-Invalid Bit: Segment is not available for address-translation |
| * TT Type 01 |
| * TF |
| * TL Table length |
| * |
| * The 64 bit regiontable origin of S390 has following format: |
| * | region table origon | DTTL |
| * 0000000000111111111122222222223333333333444444444455555555556666 |
| * 0123456789012345678901234567890123456789012345678901234567890123 |
| * |
| * X Space-Switch event: |
| * G Segment-Invalid Bit: |
| * P Private-Space Bit: |
| * S Storage-Alteration: |
| * R Real space |
| * TL Table-Length: |
| * |
| * A storage key has the following format: |
| * | ACC |F|R|C|0| |
| * 0 3 4 5 6 7 |
| * ACC: access key |
| * F : fetch protection bit |
| * R : referenced bit |
| * C : changed bit |
| */ |
| |
| /* Hardware bits in the page table entry */ |
| #define _PAGE_CO 0x100 /* HW Change-bit override */ |
| #define _PAGE_RO 0x200 /* HW read-only bit */ |
| #define _PAGE_INVALID 0x400 /* HW invalid bit */ |
| |
| /* Software bits in the page table entry */ |
| #define _PAGE_SWT 0x001 /* SW pte type bit t */ |
| #define _PAGE_SWX 0x002 /* SW pte type bit x */ |
| #define _PAGE_SWC 0x004 /* SW pte changed bit (for KVM) */ |
| #define _PAGE_SWR 0x008 /* SW pte referenced bit (for KVM) */ |
| #define _PAGE_SPECIAL 0x010 /* SW associated with special page */ |
| #define __HAVE_ARCH_PTE_SPECIAL |
| |
| /* Set of bits not changed in pte_modify */ |
| #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL | _PAGE_SWC | _PAGE_SWR) |
| |
| /* Six different types of pages. */ |
| #define _PAGE_TYPE_EMPTY 0x400 |
| #define _PAGE_TYPE_NONE 0x401 |
| #define _PAGE_TYPE_SWAP 0x403 |
| #define _PAGE_TYPE_FILE 0x601 /* bit 0x002 is used for offset !! */ |
| #define _PAGE_TYPE_RO 0x200 |
| #define _PAGE_TYPE_RW 0x000 |
| |
| /* |
| * Only four types for huge pages, using the invalid bit and protection bit |
| * of a segment table entry. |
| */ |
| #define _HPAGE_TYPE_EMPTY 0x020 /* _SEGMENT_ENTRY_INV */ |
| #define _HPAGE_TYPE_NONE 0x220 |
| #define _HPAGE_TYPE_RO 0x200 /* _SEGMENT_ENTRY_RO */ |
| #define _HPAGE_TYPE_RW 0x000 |
| |
| /* |
| * PTE type bits are rather complicated. handle_pte_fault uses pte_present, |
| * pte_none and pte_file to find out the pte type WITHOUT holding the page |
| * table lock. ptep_clear_flush on the other hand uses ptep_clear_flush to |
| * invalidate a given pte. ipte sets the hw invalid bit and clears all tlbs |
| * for the page. The page table entry is set to _PAGE_TYPE_EMPTY afterwards. |
| * This change is done while holding the lock, but the intermediate step |
| * of a previously valid pte with the hw invalid bit set can be observed by |
| * handle_pte_fault. That makes it necessary that all valid pte types with |
| * the hw invalid bit set must be distinguishable from the four pte types |
| * empty, none, swap and file. |
| * |
| * irxt ipte irxt |
| * _PAGE_TYPE_EMPTY 1000 -> 1000 |
| * _PAGE_TYPE_NONE 1001 -> 1001 |
| * _PAGE_TYPE_SWAP 1011 -> 1011 |
| * _PAGE_TYPE_FILE 11?1 -> 11?1 |
| * _PAGE_TYPE_RO 0100 -> 1100 |
| * _PAGE_TYPE_RW 0000 -> 1000 |
| * |
| * pte_none is true for bits combinations 1000, 1010, 1100, 1110 |
| * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001 |
| * pte_file is true for bits combinations 1101, 1111 |
| * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid. |
| */ |
| |
| #ifndef CONFIG_64BIT |
| |
| /* Bits in the segment table address-space-control-element */ |
| #define _ASCE_SPACE_SWITCH 0x80000000UL /* space switch event */ |
| #define _ASCE_ORIGIN_MASK 0x7ffff000UL /* segment table origin */ |
| #define _ASCE_PRIVATE_SPACE 0x100 /* private space control */ |
| #define _ASCE_ALT_EVENT 0x80 /* storage alteration event control */ |
| #define _ASCE_TABLE_LENGTH 0x7f /* 128 x 64 entries = 8k */ |
| |
| /* Bits in the segment table entry */ |
| #define _SEGMENT_ENTRY_ORIGIN 0x7fffffc0UL /* page table origin */ |
| #define _SEGMENT_ENTRY_RO 0x200 /* page protection bit */ |
| #define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */ |
| #define _SEGMENT_ENTRY_COMMON 0x10 /* common segment bit */ |
| #define _SEGMENT_ENTRY_PTL 0x0f /* page table length */ |
| |
| #define _SEGMENT_ENTRY (_SEGMENT_ENTRY_PTL) |
| #define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV) |
| |
| /* Page status table bits for virtualization */ |
| #define RCP_ACC_BITS 0xf0000000UL |
| #define RCP_FP_BIT 0x08000000UL |
| #define RCP_PCL_BIT 0x00800000UL |
| #define RCP_HR_BIT 0x00400000UL |
| #define RCP_HC_BIT 0x00200000UL |
| #define RCP_GR_BIT 0x00040000UL |
| #define RCP_GC_BIT 0x00020000UL |
| |
| /* User dirty / referenced bit for KVM's migration feature */ |
| #define KVM_UR_BIT 0x00008000UL |
| #define KVM_UC_BIT 0x00004000UL |
| |
| #else /* CONFIG_64BIT */ |
| |
| /* Bits in the segment/region table address-space-control-element */ |
| #define _ASCE_ORIGIN ~0xfffUL/* segment table origin */ |
| #define _ASCE_PRIVATE_SPACE 0x100 /* private space control */ |
| #define _ASCE_ALT_EVENT 0x80 /* storage alteration event control */ |
| #define _ASCE_SPACE_SWITCH 0x40 /* space switch event */ |
| #define _ASCE_REAL_SPACE 0x20 /* real space control */ |
| #define _ASCE_TYPE_MASK 0x0c /* asce table type mask */ |
| #define _ASCE_TYPE_REGION1 0x0c /* region first table type */ |
| #define _ASCE_TYPE_REGION2 0x08 /* region second table type */ |
| #define _ASCE_TYPE_REGION3 0x04 /* region third table type */ |
| #define _ASCE_TYPE_SEGMENT 0x00 /* segment table type */ |
| #define _ASCE_TABLE_LENGTH 0x03 /* region table length */ |
| |
| /* Bits in the region table entry */ |
| #define _REGION_ENTRY_ORIGIN ~0xfffUL/* region/segment table origin */ |
| #define _REGION_ENTRY_INV 0x20 /* invalid region table entry */ |
| #define _REGION_ENTRY_TYPE_MASK 0x0c /* region/segment table type mask */ |
| #define _REGION_ENTRY_TYPE_R1 0x0c /* region first table type */ |
| #define _REGION_ENTRY_TYPE_R2 0x08 /* region second table type */ |
| #define _REGION_ENTRY_TYPE_R3 0x04 /* region third table type */ |
| #define _REGION_ENTRY_LENGTH 0x03 /* region third length */ |
| |
| #define _REGION1_ENTRY (_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_LENGTH) |
| #define _REGION1_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INV) |
| #define _REGION2_ENTRY (_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_LENGTH) |
| #define _REGION2_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INV) |
| #define _REGION3_ENTRY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH) |
| #define _REGION3_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INV) |
| |
| /* Bits in the segment table entry */ |
| #define _SEGMENT_ENTRY_ORIGIN ~0x7ffUL/* segment table origin */ |
| #define _SEGMENT_ENTRY_RO 0x200 /* page protection bit */ |
| #define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */ |
| |
| #define _SEGMENT_ENTRY (0) |
| #define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV) |
| |
| #define _SEGMENT_ENTRY_LARGE 0x400 /* STE-format control, large page */ |
| #define _SEGMENT_ENTRY_CO 0x100 /* change-recording override */ |
| |
| /* Page status table bits for virtualization */ |
| #define RCP_ACC_BITS 0xf000000000000000UL |
| #define RCP_FP_BIT 0x0800000000000000UL |
| #define RCP_PCL_BIT 0x0080000000000000UL |
| #define RCP_HR_BIT 0x0040000000000000UL |
| #define RCP_HC_BIT 0x0020000000000000UL |
| #define RCP_GR_BIT 0x0004000000000000UL |
| #define RCP_GC_BIT 0x0002000000000000UL |
| |
| /* User dirty / referenced bit for KVM's migration feature */ |
| #define KVM_UR_BIT 0x0000800000000000UL |
| #define KVM_UC_BIT 0x0000400000000000UL |
| |
| #endif /* CONFIG_64BIT */ |
| |
| /* |
| * A user page table pointer has the space-switch-event bit, the |
| * private-space-control bit and the storage-alteration-event-control |
| * bit set. A kernel page table pointer doesn't need them. |
| */ |
| #define _ASCE_USER_BITS (_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \ |
| _ASCE_ALT_EVENT) |
| |
| /* |
| * Page protection definitions. |
| */ |
| #define PAGE_NONE __pgprot(_PAGE_TYPE_NONE) |
| #define PAGE_RO __pgprot(_PAGE_TYPE_RO) |
| #define PAGE_RW __pgprot(_PAGE_TYPE_RW) |
| |
| #define PAGE_KERNEL PAGE_RW |
| #define PAGE_COPY PAGE_RO |
| |
| /* |
| * On s390 the page table entry has an invalid bit and a read-only bit. |
| * Read permission implies execute permission and write permission |
| * implies read permission. |
| */ |
| /*xwr*/ |
| #define __P000 PAGE_NONE |
| #define __P001 PAGE_RO |
| #define __P010 PAGE_RO |
| #define __P011 PAGE_RO |
| #define __P100 PAGE_RO |
| #define __P101 PAGE_RO |
| #define __P110 PAGE_RO |
| #define __P111 PAGE_RO |
| |
| #define __S000 PAGE_NONE |
| #define __S001 PAGE_RO |
| #define __S010 PAGE_RW |
| #define __S011 PAGE_RW |
| #define __S100 PAGE_RO |
| #define __S101 PAGE_RO |
| #define __S110 PAGE_RW |
| #define __S111 PAGE_RW |
| |
| static inline int mm_exclusive(struct mm_struct *mm) |
| { |
| return likely(mm == current->active_mm && |
| atomic_read(&mm->context.attach_count) <= 1); |
| } |
| |
| static inline int mm_has_pgste(struct mm_struct *mm) |
| { |
| #ifdef CONFIG_PGSTE |
| if (unlikely(mm->context.has_pgste)) |
| return 1; |
| #endif |
| return 0; |
| } |
| /* |
| * pgd/pmd/pte query functions |
| */ |
| #ifndef CONFIG_64BIT |
| |
| static inline int pgd_present(pgd_t pgd) { return 1; } |
| static inline int pgd_none(pgd_t pgd) { return 0; } |
| static inline int pgd_bad(pgd_t pgd) { return 0; } |
| |
| static inline int pud_present(pud_t pud) { return 1; } |
| static inline int pud_none(pud_t pud) { return 0; } |
| static inline int pud_bad(pud_t pud) { return 0; } |
| |
| #else /* CONFIG_64BIT */ |
| |
| static inline int pgd_present(pgd_t pgd) |
| { |
| if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2) |
| return 1; |
| return (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) != 0UL; |
| } |
| |
| static inline int pgd_none(pgd_t pgd) |
| { |
| if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2) |
| return 0; |
| return (pgd_val(pgd) & _REGION_ENTRY_INV) != 0UL; |
| } |
| |
| static inline int pgd_bad(pgd_t pgd) |
| { |
| /* |
| * With dynamic page table levels the pgd can be a region table |
| * entry or a segment table entry. Check for the bit that are |
| * invalid for either table entry. |
| */ |
| unsigned long mask = |
| ~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV & |
| ~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH; |
| return (pgd_val(pgd) & mask) != 0; |
| } |
| |
| static inline int pud_present(pud_t pud) |
| { |
| if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3) |
| return 1; |
| return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL; |
| } |
| |
| static inline int pud_none(pud_t pud) |
| { |
| if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3) |
| return 0; |
| return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL; |
| } |
| |
| static inline int pud_bad(pud_t pud) |
| { |
| /* |
| * With dynamic page table levels the pud can be a region table |
| * entry or a segment table entry. Check for the bit that are |
| * invalid for either table entry. |
| */ |
| unsigned long mask = |
| ~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV & |
| ~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH; |
| return (pud_val(pud) & mask) != 0; |
| } |
| |
| #endif /* CONFIG_64BIT */ |
| |
| static inline int pmd_present(pmd_t pmd) |
| { |
| return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL; |
| } |
| |
| static inline int pmd_none(pmd_t pmd) |
| { |
| return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL; |
| } |
| |
| static inline int pmd_bad(pmd_t pmd) |
| { |
| unsigned long mask = ~_SEGMENT_ENTRY_ORIGIN & ~_SEGMENT_ENTRY_INV; |
| return (pmd_val(pmd) & mask) != _SEGMENT_ENTRY; |
| } |
| |
| static inline int pte_none(pte_t pte) |
| { |
| return (pte_val(pte) & _PAGE_INVALID) && !(pte_val(pte) & _PAGE_SWT); |
| } |
| |
| static inline int pte_present(pte_t pte) |
| { |
| unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT | _PAGE_SWX; |
| return (pte_val(pte) & mask) == _PAGE_TYPE_NONE || |
| (!(pte_val(pte) & _PAGE_INVALID) && |
| !(pte_val(pte) & _PAGE_SWT)); |
| } |
| |
| static inline int pte_file(pte_t pte) |
| { |
| unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT; |
| return (pte_val(pte) & mask) == _PAGE_TYPE_FILE; |
| } |
| |
| static inline int pte_special(pte_t pte) |
| { |
| return (pte_val(pte) & _PAGE_SPECIAL); |
| } |
| |
| #define __HAVE_ARCH_PTE_SAME |
| static inline int pte_same(pte_t a, pte_t b) |
| { |
| return pte_val(a) == pte_val(b); |
| } |
| |
| static inline pgste_t pgste_get_lock(pte_t *ptep) |
| { |
| unsigned long new = 0; |
| #ifdef CONFIG_PGSTE |
| unsigned long old; |
| |
| preempt_disable(); |
| asm( |
| " lg %0,%2\n" |
| "0: lgr %1,%0\n" |
| " nihh %0,0xff7f\n" /* clear RCP_PCL_BIT in old */ |
| " oihh %1,0x0080\n" /* set RCP_PCL_BIT in new */ |
| " csg %0,%1,%2\n" |
| " jl 0b\n" |
| : "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE]) |
| : "Q" (ptep[PTRS_PER_PTE]) : "cc"); |
| #endif |
| return __pgste(new); |
| } |
| |
| static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) |
| { |
| #ifdef CONFIG_PGSTE |
| asm( |
| " nihh %1,0xff7f\n" /* clear RCP_PCL_BIT */ |
| " stg %1,%0\n" |
| : "=Q" (ptep[PTRS_PER_PTE]) |
| : "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE]) : "cc"); |
| preempt_enable(); |
| #endif |
| } |
| |
| static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) |
| { |
| #ifdef CONFIG_PGSTE |
| unsigned long address, bits; |
| unsigned char skey; |
| |
| if (!pte_present(*ptep)) |
| return pgste; |
| address = pte_val(*ptep) & PAGE_MASK; |
| skey = page_get_storage_key(address); |
| bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); |
| /* Clear page changed & referenced bit in the storage key */ |
| if (bits & _PAGE_CHANGED) |
| page_set_storage_key(address, skey ^ bits, 1); |
| else if (bits) |
| page_reset_referenced(address); |
| /* Transfer page changed & referenced bit to guest bits in pgste */ |
| pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */ |
| /* Get host changed & referenced bits from pgste */ |
| bits |= (pgste_val(pgste) & (RCP_HR_BIT | RCP_HC_BIT)) >> 52; |
| /* Clear host bits in pgste. */ |
| pgste_val(pgste) &= ~(RCP_HR_BIT | RCP_HC_BIT); |
| pgste_val(pgste) &= ~(RCP_ACC_BITS | RCP_FP_BIT); |
| /* Copy page access key and fetch protection bit to pgste */ |
| pgste_val(pgste) |= |
| (unsigned long) (skey & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56; |
| /* Transfer changed and referenced to kvm user bits */ |
| pgste_val(pgste) |= bits << 45; /* KVM_UR_BIT & KVM_UC_BIT */ |
| /* Transfer changed & referenced to pte sofware bits */ |
| pte_val(*ptep) |= bits << 1; /* _PAGE_SWR & _PAGE_SWC */ |
| #endif |
| return pgste; |
| |
| } |
| |
| static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) |
| { |
| #ifdef CONFIG_PGSTE |
| int young; |
| |
| if (!pte_present(*ptep)) |
| return pgste; |
| young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK); |
| /* Transfer page referenced bit to pte software bit (host view) */ |
| if (young || (pgste_val(pgste) & RCP_HR_BIT)) |
| pte_val(*ptep) |= _PAGE_SWR; |
| /* Clear host referenced bit in pgste. */ |
| pgste_val(pgste) &= ~RCP_HR_BIT; |
| /* Transfer page referenced bit to guest bit in pgste */ |
| pgste_val(pgste) |= (unsigned long) young << 50; /* set RCP_GR_BIT */ |
| #endif |
| return pgste; |
| |
| } |
| |
| static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry) |
| { |
| #ifdef CONFIG_PGSTE |
| unsigned long address; |
| unsigned long okey, nkey; |
| |
| if (!pte_present(entry)) |
| return; |
| address = pte_val(entry) & PAGE_MASK; |
| okey = nkey = page_get_storage_key(address); |
| nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT); |
| /* Set page access key and fetch protection bit from pgste */ |
| nkey |= (pgste_val(pgste) & (RCP_ACC_BITS | RCP_FP_BIT)) >> 56; |
| if (okey != nkey) |
| page_set_storage_key(address, nkey, 1); |
| #endif |
| } |
| |
| /** |
| * struct gmap_struct - guest address space |
| * @mm: pointer to the parent mm_struct |
| * @table: pointer to the page directory |
| * @asce: address space control element for gmap page table |
| * @crst_list: list of all crst tables used in the guest address space |
| */ |
| struct gmap { |
| struct list_head list; |
| struct mm_struct *mm; |
| unsigned long *table; |
| unsigned long asce; |
| struct list_head crst_list; |
| }; |
| |
| /** |
| * struct gmap_rmap - reverse mapping for segment table entries |
| * @next: pointer to the next gmap_rmap structure in the list |
| * @entry: pointer to a segment table entry |
| */ |
| struct gmap_rmap { |
| struct list_head list; |
| unsigned long *entry; |
| }; |
| |
| /** |
| * struct gmap_pgtable - gmap information attached to a page table |
| * @vmaddr: address of the 1MB segment in the process virtual memory |
| * @mapper: list of segment table entries maping a page table |
| */ |
| struct gmap_pgtable { |
| unsigned long vmaddr; |
| struct list_head mapper; |
| }; |
| |
| struct gmap *gmap_alloc(struct mm_struct *mm); |
| void gmap_free(struct gmap *gmap); |
| void gmap_enable(struct gmap *gmap); |
| void gmap_disable(struct gmap *gmap); |
| int gmap_map_segment(struct gmap *gmap, unsigned long from, |
| unsigned long to, unsigned long length); |
| int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len); |
| unsigned long __gmap_fault(unsigned long address, struct gmap *); |
| unsigned long gmap_fault(unsigned long address, struct gmap *); |
| void gmap_discard(unsigned long from, unsigned long to, struct gmap *); |
| |
| /* |
| * Certain architectures need to do special things when PTEs |
| * within a page table are directly modified. Thus, the following |
| * hook is made available. |
| */ |
| static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, |
| pte_t *ptep, pte_t entry) |
| { |
| pgste_t pgste; |
| |
| if (mm_has_pgste(mm)) { |
| pgste = pgste_get_lock(ptep); |
| pgste_set_pte(ptep, pgste, entry); |
| *ptep = entry; |
| pgste_set_unlock(ptep, pgste); |
| } else |
| *ptep = entry; |
| } |
| |
| /* |
| * query functions pte_write/pte_dirty/pte_young only work if |
| * pte_present() is true. Undefined behaviour if not.. |
| */ |
| static inline int pte_write(pte_t pte) |
| { |
| return (pte_val(pte) & _PAGE_RO) == 0; |
| } |
| |
| static inline int pte_dirty(pte_t pte) |
| { |
| #ifdef CONFIG_PGSTE |
| if (pte_val(pte) & _PAGE_SWC) |
| return 1; |
| #endif |
| return 0; |
| } |
| |
| static inline int pte_young(pte_t pte) |
| { |
| #ifdef CONFIG_PGSTE |
| if (pte_val(pte) & _PAGE_SWR) |
| return 1; |
| #endif |
| return 0; |
| } |
| |
| /* |
| * pgd/pmd/pte modification functions |
| */ |
| |
| static inline void pgd_clear(pgd_t *pgd) |
| { |
| #ifdef CONFIG_64BIT |
| if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2) |
| pgd_val(*pgd) = _REGION2_ENTRY_EMPTY; |
| #endif |
| } |
| |
| static inline void pud_clear(pud_t *pud) |
| { |
| #ifdef CONFIG_64BIT |
| if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) |
| pud_val(*pud) = _REGION3_ENTRY_EMPTY; |
| #endif |
| } |
| |
| static inline void pmd_clear(pmd_t *pmdp) |
| { |
| pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY; |
| } |
| |
| static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) |
| { |
| pte_val(*ptep) = _PAGE_TYPE_EMPTY; |
| } |
| |
| /* |
| * The following pte modification functions only work if |
| * pte_present() is true. Undefined behaviour if not.. |
| */ |
| static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) |
| { |
| pte_val(pte) &= _PAGE_CHG_MASK; |
| pte_val(pte) |= pgprot_val(newprot); |
| return pte; |
| } |
| |
| static inline pte_t pte_wrprotect(pte_t pte) |
| { |
| /* Do not clobber _PAGE_TYPE_NONE pages! */ |
| if (!(pte_val(pte) & _PAGE_INVALID)) |
| pte_val(pte) |= _PAGE_RO; |
| return pte; |
| } |
| |
| static inline pte_t pte_mkwrite(pte_t pte) |
| { |
| pte_val(pte) &= ~_PAGE_RO; |
| return pte; |
| } |
| |
| static inline pte_t pte_mkclean(pte_t pte) |
| { |
| #ifdef CONFIG_PGSTE |
| pte_val(pte) &= ~_PAGE_SWC; |
| #endif |
| return pte; |
| } |
| |
| static inline pte_t pte_mkdirty(pte_t pte) |
| { |
| return pte; |
| } |
| |
| static inline pte_t pte_mkold(pte_t pte) |
| { |
| #ifdef CONFIG_PGSTE |
| pte_val(pte) &= ~_PAGE_SWR; |
| #endif |
| return pte; |
| } |
| |
| static inline pte_t pte_mkyoung(pte_t pte) |
| { |
| return pte; |
| } |
| |
| static inline pte_t pte_mkspecial(pte_t pte) |
| { |
| pte_val(pte) |= _PAGE_SPECIAL; |
| return pte; |
| } |
| |
| #ifdef CONFIG_HUGETLB_PAGE |
| static inline pte_t pte_mkhuge(pte_t pte) |
| { |
| /* |
| * PROT_NONE needs to be remapped from the pte type to the ste type. |
| * The HW invalid bit is also different for pte and ste. The pte |
| * invalid bit happens to be the same as the ste _SEGMENT_ENTRY_LARGE |
| * bit, so we don't have to clear it. |
| */ |
| if (pte_val(pte) & _PAGE_INVALID) { |
| if (pte_val(pte) & _PAGE_SWT) |
| pte_val(pte) |= _HPAGE_TYPE_NONE; |
| pte_val(pte) |= _SEGMENT_ENTRY_INV; |
| } |
| /* |
| * Clear SW pte bits SWT and SWX, there are no SW bits in a segment |
| * table entry. |
| */ |
| pte_val(pte) &= ~(_PAGE_SWT | _PAGE_SWX); |
| /* |
| * Also set the change-override bit because we don't need dirty bit |
| * tracking for hugetlbfs pages. |
| */ |
| pte_val(pte) |= (_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_CO); |
| return pte; |
| } |
| #endif |
| |
| /* |
| * Get (and clear) the user dirty bit for a pte. |
| */ |
| static inline int ptep_test_and_clear_user_dirty(struct mm_struct *mm, |
| pte_t *ptep) |
| { |
| pgste_t pgste; |
| int dirty = 0; |
| |
| if (mm_has_pgste(mm)) { |
| pgste = pgste_get_lock(ptep); |
| pgste = pgste_update_all(ptep, pgste); |
| dirty = !!(pgste_val(pgste) & KVM_UC_BIT); |
| pgste_val(pgste) &= ~KVM_UC_BIT; |
| pgste_set_unlock(ptep, pgste); |
| return dirty; |
| } |
| return dirty; |
| } |
| |
| /* |
| * Get (and clear) the user referenced bit for a pte. |
| */ |
| static inline int ptep_test_and_clear_user_young(struct mm_struct *mm, |
| pte_t *ptep) |
| { |
| pgste_t pgste; |
| int young = 0; |
| |
| if (mm_has_pgste(mm)) { |
| pgste = pgste_get_lock(ptep); |
| pgste = pgste_update_young(ptep, pgste); |
| young = !!(pgste_val(pgste) & KVM_UR_BIT); |
| pgste_val(pgste) &= ~KVM_UR_BIT; |
| pgste_set_unlock(ptep, pgste); |
| } |
| return young; |
| } |
| |
| #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG |
| static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, |
| unsigned long addr, pte_t *ptep) |
| { |
| pgste_t pgste; |
| pte_t pte; |
| |
| if (mm_has_pgste(vma->vm_mm)) { |
| pgste = pgste_get_lock(ptep); |
| pgste = pgste_update_young(ptep, pgste); |
| pte = *ptep; |
| *ptep = pte_mkold(pte); |
| pgste_set_unlock(ptep, pgste); |
| return pte_young(pte); |
| } |
| return 0; |
| } |
| |
| #define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH |
| static inline int ptep_clear_flush_young(struct vm_area_struct *vma, |
| unsigned long address, pte_t *ptep) |
| { |
| /* No need to flush TLB |
| * On s390 reference bits are in storage key and never in TLB |
| * With virtualization we handle the reference bit, without we |
| * we can simply return */ |
| return ptep_test_and_clear_young(vma, address, ptep); |
| } |
| |
| static inline void __ptep_ipte(unsigned long address, pte_t *ptep) |
| { |
| if (!(pte_val(*ptep) & _PAGE_INVALID)) { |
| #ifndef CONFIG_64BIT |
| /* pto must point to the start of the segment table */ |
| pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00); |
| #else |
| /* ipte in zarch mode can do the math */ |
| pte_t *pto = ptep; |
| #endif |
| asm volatile( |
| " ipte %2,%3" |
| : "=m" (*ptep) : "m" (*ptep), |
| "a" (pto), "a" (address)); |
| } |
| } |
| |
| /* |
| * This is hard to understand. ptep_get_and_clear and ptep_clear_flush |
| * both clear the TLB for the unmapped pte. The reason is that |
| * ptep_get_and_clear is used in common code (e.g. change_pte_range) |
| * to modify an active pte. The sequence is |
| * 1) ptep_get_and_clear |
| * 2) set_pte_at |
| * 3) flush_tlb_range |
| * On s390 the tlb needs to get flushed with the modification of the pte |
| * if the pte is active. The only way how this can be implemented is to |
| * have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range |
| * is a nop. |
| */ |
| #define __HAVE_ARCH_PTEP_GET_AND_CLEAR |
| static inline pte_t ptep_get_and_clear(struct mm_struct *mm, |
| unsigned long address, pte_t *ptep) |
| { |
| pgste_t pgste; |
| pte_t pte; |
| |
| mm->context.flush_mm = 1; |
| if (mm_has_pgste(mm)) |
| pgste = pgste_get_lock(ptep); |
| |
| pte = *ptep; |
| if (!mm_exclusive(mm)) |
| __ptep_ipte(address, ptep); |
| pte_val(*ptep) = _PAGE_TYPE_EMPTY; |
| |
| if (mm_has_pgste(mm)) { |
| pgste = pgste_update_all(&pte, pgste); |
| pgste_set_unlock(ptep, pgste); |
| } |
| return pte; |
| } |
| |
| #define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION |
| static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, |
| unsigned long address, |
| pte_t *ptep) |
| { |
| pte_t pte; |
| |
| mm->context.flush_mm = 1; |
| if (mm_has_pgste(mm)) |
| pgste_get_lock(ptep); |
| |
| pte = *ptep; |
| if (!mm_exclusive(mm)) |
| __ptep_ipte(address, ptep); |
| return pte; |
| } |
| |
| static inline void ptep_modify_prot_commit(struct mm_struct *mm, |
| unsigned long address, |
| pte_t *ptep, pte_t pte) |
| { |
| *ptep = pte; |
| if (mm_has_pgste(mm)) |
| pgste_set_unlock(ptep, *(pgste_t *)(ptep + PTRS_PER_PTE)); |
| } |
| |
| #define __HAVE_ARCH_PTEP_CLEAR_FLUSH |
| static inline pte_t ptep_clear_flush(struct vm_area_struct *vma, |
| unsigned long address, pte_t *ptep) |
| { |
| pgste_t pgste; |
| pte_t pte; |
| |
| if (mm_has_pgste(vma->vm_mm)) |
| pgste = pgste_get_lock(ptep); |
| |
| pte = *ptep; |
| __ptep_ipte(address, ptep); |
| pte_val(*ptep) = _PAGE_TYPE_EMPTY; |
| |
| if (mm_has_pgste(vma->vm_mm)) { |
| pgste = pgste_update_all(&pte, pgste); |
| pgste_set_unlock(ptep, pgste); |
| } |
| return pte; |
| } |
| |
| /* |
| * The batched pte unmap code uses ptep_get_and_clear_full to clear the |
| * ptes. Here an optimization is possible. tlb_gather_mmu flushes all |
| * tlbs of an mm if it can guarantee that the ptes of the mm_struct |
| * cannot be accessed while the batched unmap is running. In this case |
| * full==1 and a simple pte_clear is enough. See tlb.h. |
| */ |
| #define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL |
| static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, |
| unsigned long address, |
| pte_t *ptep, int full) |
| { |
| pgste_t pgste; |
| pte_t pte; |
| |
| if (mm_has_pgste(mm)) |
| pgste = pgste_get_lock(ptep); |
| |
| pte = *ptep; |
| if (!full) |
| __ptep_ipte(address, ptep); |
| pte_val(*ptep) = _PAGE_TYPE_EMPTY; |
| |
| if (mm_has_pgste(mm)) { |
| pgste = pgste_update_all(&pte, pgste); |
| pgste_set_unlock(ptep, pgste); |
| } |
| return pte; |
| } |
| |
| #define __HAVE_ARCH_PTEP_SET_WRPROTECT |
| static inline pte_t ptep_set_wrprotect(struct mm_struct *mm, |
| unsigned long address, pte_t *ptep) |
| { |
| pgste_t pgste; |
| pte_t pte = *ptep; |
| |
| if (pte_write(pte)) { |
| mm->context.flush_mm = 1; |
| if (mm_has_pgste(mm)) |
| pgste = pgste_get_lock(ptep); |
| |
| if (!mm_exclusive(mm)) |
| __ptep_ipte(address, ptep); |
| *ptep = pte_wrprotect(pte); |
| |
| if (mm_has_pgste(mm)) |
| pgste_set_unlock(ptep, pgste); |
| } |
| return pte; |
| } |
| |
| #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS |
| static inline int ptep_set_access_flags(struct vm_area_struct *vma, |
| unsigned long address, pte_t *ptep, |
| pte_t entry, int dirty) |
| { |
| pgste_t pgste; |
| |
| if (pte_same(*ptep, entry)) |
| return 0; |
| if (mm_has_pgste(vma->vm_mm)) |
| pgste = pgste_get_lock(ptep); |
| |
| __ptep_ipte(address, ptep); |
| *ptep = entry; |
| |
| if (mm_has_pgste(vma->vm_mm)) |
| pgste_set_unlock(ptep, pgste); |
| return 1; |
| } |
| |
| /* |
| * Conversion functions: convert a page and protection to a page entry, |
| * and a page entry and page directory to the page they refer to. |
| */ |
| static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot) |
| { |
| pte_t __pte; |
| pte_val(__pte) = physpage + pgprot_val(pgprot); |
| return __pte; |
| } |
| |
| static inline pte_t mk_pte(struct page *page, pgprot_t pgprot) |
| { |
| unsigned long physpage = page_to_phys(page); |
| |
| return mk_pte_phys(physpage, pgprot); |
| } |
| |
| #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) |
| #define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) |
| #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) |
| #define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1)) |
| |
| #define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) |
| #define pgd_offset_k(address) pgd_offset(&init_mm, address) |
| |
| #ifndef CONFIG_64BIT |
| |
| #define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) |
| #define pud_deref(pmd) ({ BUG(); 0UL; }) |
| #define pgd_deref(pmd) ({ BUG(); 0UL; }) |
| |
| #define pud_offset(pgd, address) ((pud_t *) pgd) |
| #define pmd_offset(pud, address) ((pmd_t *) pud + pmd_index(address)) |
| |
| #else /* CONFIG_64BIT */ |
| |
| #define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) |
| #define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN) |
| #define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) |
| |
| static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) |
| { |
| pud_t *pud = (pud_t *) pgd; |
| if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2) |
| pud = (pud_t *) pgd_deref(*pgd); |
| return pud + pud_index(address); |
| } |
| |
| static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) |
| { |
| pmd_t *pmd = (pmd_t *) pud; |
| if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) |
| pmd = (pmd_t *) pud_deref(*pud); |
| return pmd + pmd_index(address); |
| } |
| |
| #endif /* CONFIG_64BIT */ |
| |
| #define pfn_pte(pfn,pgprot) mk_pte_phys(__pa((pfn) << PAGE_SHIFT),(pgprot)) |
| #define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT) |
| #define pte_page(x) pfn_to_page(pte_pfn(x)) |
| |
| #define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) |
| |
| /* Find an entry in the lowest level page table.. */ |
| #define pte_offset(pmd, addr) ((pte_t *) pmd_deref(*(pmd)) + pte_index(addr)) |
| #define pte_offset_kernel(pmd, address) pte_offset(pmd,address) |
| #define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address) |
| #define pte_unmap(pte) do { } while (0) |
| |
| /* |
| * 31 bit swap entry format: |
| * A page-table entry has some bits we have to treat in a special way. |
| * Bits 0, 20 and bit 23 have to be zero, otherwise an specification |
| * exception will occur instead of a page translation exception. The |
| * specifiation exception has the bad habit not to store necessary |
| * information in the lowcore. |
| * Bit 21 and bit 22 are the page invalid bit and the page protection |
| * bit. We set both to indicate a swapped page. |
| * Bit 30 and 31 are used to distinguish the different page types. For |
| * a swapped page these bits need to be zero. |
| * This leaves the bits 1-19 and bits 24-29 to store type and offset. |
| * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19 |
| * plus 24 for the offset. |
| * 0| offset |0110|o|type |00| |
| * 0 0000000001111111111 2222 2 22222 33 |
| * 0 1234567890123456789 0123 4 56789 01 |
| * |
| * 64 bit swap entry format: |
| * A page-table entry has some bits we have to treat in a special way. |
| * Bits 52 and bit 55 have to be zero, otherwise an specification |
| * exception will occur instead of a page translation exception. The |
| * specifiation exception has the bad habit not to store necessary |
| * information in the lowcore. |
| * Bit 53 and bit 54 are the page invalid bit and the page protection |
| * bit. We set both to indicate a swapped page. |
| * Bit 62 and 63 are used to distinguish the different page types. For |
| * a swapped page these bits need to be zero. |
| * This leaves the bits 0-51 and bits 56-61 to store type and offset. |
| * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51 |
| * plus 56 for the offset. |
| * | offset |0110|o|type |00| |
| * 0000000000111111111122222222223333333333444444444455 5555 5 55566 66 |
| * 0123456789012345678901234567890123456789012345678901 2345 6 78901 23 |
| */ |
| #ifndef CONFIG_64BIT |
| #define __SWP_OFFSET_MASK (~0UL >> 12) |
| #else |
| #define __SWP_OFFSET_MASK (~0UL >> 11) |
| #endif |
| static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) |
| { |
| pte_t pte; |
| offset &= __SWP_OFFSET_MASK; |
| pte_val(pte) = _PAGE_TYPE_SWAP | ((type & 0x1f) << 2) | |
| ((offset & 1UL) << 7) | ((offset & ~1UL) << 11); |
| return pte; |
| } |
| |
| #define __swp_type(entry) (((entry).val >> 2) & 0x1f) |
| #define __swp_offset(entry) (((entry).val >> 11) | (((entry).val >> 7) & 1)) |
| #define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) }) |
| |
| #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) |
| #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) |
| |
| #ifndef CONFIG_64BIT |
| # define PTE_FILE_MAX_BITS 26 |
| #else /* CONFIG_64BIT */ |
| # define PTE_FILE_MAX_BITS 59 |
| #endif /* CONFIG_64BIT */ |
| |
| #define pte_to_pgoff(__pte) \ |
| ((((__pte).pte >> 12) << 7) + (((__pte).pte >> 1) & 0x7f)) |
| |
| #define pgoff_to_pte(__off) \ |
| ((pte_t) { ((((__off) & 0x7f) << 1) + (((__off) >> 7) << 12)) \ |
| | _PAGE_TYPE_FILE }) |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| #define kern_addr_valid(addr) (1) |
| |
| extern int vmem_add_mapping(unsigned long start, unsigned long size); |
| extern int vmem_remove_mapping(unsigned long start, unsigned long size); |
| extern int s390_enable_sie(void); |
| |
| /* |
| * No page table caches to initialise |
| */ |
| #define pgtable_cache_init() do { } while (0) |
| |
| #include <asm-generic/pgtable.h> |
| |
| #endif /* _S390_PAGE_H */ |