[libata] pata_sil680: Add MMIO support
This patch adds MMIO support to the pata_sil680 for taskfile IOs,
based on what the old siimage does.
I haven't bothered changing the chip setup stuff from PCI config
cycles to MMIO though (siimage does it), I don't think it matters,
I've only adapted it to use MMIO for taskfile accesses.
I've tested it on a Cell blade and it seems to work fine.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 2eb75cd..4dc2e73 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -279,7 +279,7 @@
* Returns the final clock settings.
*/
-static u8 sil680_init_chip(struct pci_dev *pdev)
+static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
{
u32 class_rev = 0;
u8 tmpbyte = 0;
@@ -297,6 +297,8 @@
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
tmpbyte & 1, tmpbyte & 0x30);
+ *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+
switch(tmpbyte & 0x30) {
case 0x00:
/* 133 clock attempt to force it on */
@@ -361,25 +363,76 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
static int printed_version;
+ struct ata_host *host;
+ void __iomem *mmio_base;
+ int rc, try_mmio;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
- switch(sil680_init_chip(pdev))
- {
+ switch (sil680_init_chip(pdev, &try_mmio)) {
case 0:
ppi[0] = &info_slow;
break;
case 0x30:
return -ENODEV;
}
+
+ if (!try_mmio)
+ goto use_ioports;
+
+ /* Try to acquire MMIO resources and fallback to PIO if
+ * that fails
+ */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+ rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
+ if (rc)
+ goto use_ioports;
+
+ /* Allocate host and set it up */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+ if (!host)
+ return -ENOMEM;
+ host->iomap = pcim_iomap_table(pdev);
+
+ /* Setup DMA masks */
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ pci_set_master(pdev);
+
+ /* Get MMIO base and initialize port addresses */
+ mmio_base = host->iomap[SIL680_MMIO_BAR];
+ host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
+ host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
+ host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
+ host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
+ ata_std_ports(&host->ports[0]->ioaddr);
+ host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
+ host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
+ host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
+ host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
+ ata_std_ports(&host->ports[1]->ioaddr);
+
+ /* Register & activate */
+ return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+ &sil680_sht);
+
+use_ioports:
return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
- sil680_init_chip(pdev);
+ int try_mmio;
+
+ sil680_init_chip(pdev, &try_mmio);
return ata_pci_device_resume(pdev);
}
#endif