| /*********************************************************************** |
| * |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ahennessy@mvista.com |
| * |
| * Based on arch/mips/ddb5xxx/ddb5477/setup.c |
| * |
| * Setup file for JMR3927. |
| * |
| * Copyright (C) 2000-2001 Toshiba Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| *********************************************************************** |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/kdev_t.h> |
| #include <linux/types.h> |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/ide.h> |
| #include <linux/irq.h> |
| #include <linux/ioport.h> |
| #include <linux/param.h> /* for HZ */ |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #ifdef CONFIG_SERIAL_TXX9 |
| #include <linux/tty.h> |
| #include <linux/serial.h> |
| #include <linux/serial_core.h> |
| #endif |
| |
| #include <asm/addrspace.h> |
| #include <asm/time.h> |
| #include <asm/bcache.h> |
| #include <asm/irq.h> |
| #include <asm/reboot.h> |
| #include <asm/gdb-stub.h> |
| #include <asm/jmr3927/jmr3927.h> |
| #include <asm/mipsregs.h> |
| #include <asm/traps.h> |
| |
| extern void puts(unsigned char *cp); |
| |
| /* Tick Timer divider */ |
| #define JMR3927_TIMER_CCD 0 /* 1/2 */ |
| #define JMR3927_TIMER_CLK (JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD)) |
| |
| unsigned char led_state = 0xf; |
| |
| struct { |
| struct resource ram0; |
| struct resource ram1; |
| struct resource pcimem; |
| struct resource iob; |
| struct resource ioc; |
| struct resource pciio; |
| struct resource jmy1394; |
| struct resource rom1; |
| struct resource rom0; |
| struct resource sio0; |
| struct resource sio1; |
| } jmr3927_resources = { |
| { |
| .start = 0, |
| .end = 0x01FFFFFF, |
| .name = "RAM0", |
| .flags = IORESOURCE_MEM |
| }, { |
| .start = 0x02000000, |
| .end = 0x03FFFFFF, |
| .name = "RAM1", |
| .flags = IORESOURCE_MEM |
| }, { |
| .start = 0x08000000, |
| .end = 0x07FFFFFF, |
| .name = "PCIMEM", |
| .flags = IORESOURCE_MEM |
| }, { |
| .start = 0x10000000, |
| .end = 0x13FFFFFF, |
| .name = "IOB" |
| }, { |
| .start = 0x14000000, |
| .end = 0x14FFFFFF, |
| .name = "IOC" |
| }, { |
| .start = 0x15000000, |
| .end = 0x15FFFFFF, |
| .name = "PCIIO" |
| }, { |
| .start = 0x1D000000, |
| .end = 0x1D3FFFFF, |
| .name = "JMY1394" |
| }, { |
| .start = 0x1E000000, |
| .end = 0x1E3FFFFF, |
| .name = "ROM1" |
| }, { |
| .start = 0x1FC00000, |
| .end = 0x1FFFFFFF, |
| .name = "ROM0" |
| }, { |
| .start = 0xFFFEF300, |
| .end = 0xFFFEF3FF, |
| .name = "SIO0" |
| }, { |
| .start = 0xFFFEF400, |
| .end = 0xFFFEF4FF, |
| .name = "SIO1" |
| }, |
| }; |
| |
| /* don't enable - see errata */ |
| int jmr3927_ccfg_toeon = 0; |
| |
| static inline void do_reset(void) |
| { |
| #ifdef CONFIG_TC35815 |
| extern void tc35815_killall(void); |
| tc35815_killall(); |
| #endif |
| #if 1 /* Resetting PCI bus */ |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); |
| jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); |
| (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */ |
| mdelay(1); |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); |
| #endif |
| jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); |
| } |
| |
| static void jmr3927_machine_restart(char *command) |
| { |
| local_irq_disable(); |
| puts("Rebooting..."); |
| do_reset(); |
| } |
| |
| static void jmr3927_machine_halt(void) |
| { |
| puts("JMR-TX3927 halted.\n"); |
| while (1); |
| } |
| |
| static void jmr3927_machine_power_off(void) |
| { |
| puts("JMR-TX3927 halted. Please turn off the power.\n"); |
| while (1); |
| } |
| |
| #define USE_RTC_DS1742 |
| #ifdef USE_RTC_DS1742 |
| extern void rtc_ds1742_init(unsigned long base); |
| #endif |
| static void __init jmr3927_time_init(void) |
| { |
| #ifdef USE_RTC_DS1742 |
| if (jmr3927_have_nvram()) { |
| rtc_ds1742_init(JMR3927_IOC_NVRAMB_ADDR); |
| } |
| #endif |
| } |
| |
| unsigned long jmr3927_do_gettimeoffset(void); |
| |
| static void __init jmr3927_timer_setup(struct irqaction *irq) |
| { |
| do_gettimeoffset = jmr3927_do_gettimeoffset; |
| |
| jmr3927_tmrptr->cpra = JMR3927_TIMER_CLK / HZ; |
| jmr3927_tmrptr->itmr = TXx927_TMTITMR_TIIE | TXx927_TMTITMR_TZCE; |
| jmr3927_tmrptr->ccdr = JMR3927_TIMER_CCD; |
| jmr3927_tmrptr->tcr = |
| TXx927_TMTCR_TCE | TXx927_TMTCR_CCDE | TXx927_TMTCR_TMODE_ITVL; |
| |
| setup_irq(JMR3927_IRQ_TICK, irq); |
| } |
| |
| #define USECS_PER_JIFFY (1000000/HZ) |
| |
| unsigned long jmr3927_do_gettimeoffset(void) |
| { |
| unsigned long count; |
| unsigned long res = 0; |
| |
| /* MUST read TRR before TISR. */ |
| count = jmr3927_tmrptr->trr; |
| |
| if (jmr3927_tmrptr->tisr & TXx927_TMTISR_TIIS) { |
| /* timer interrupt is pending. use Max value. */ |
| res = USECS_PER_JIFFY - 1; |
| } else { |
| /* convert to usec */ |
| /* res = count / (JMR3927_TIMER_CLK / 1000000); */ |
| res = (count << 7) / ((JMR3927_TIMER_CLK << 7) / 1000000); |
| |
| /* |
| * Due to possible jiffies inconsistencies, we need to check |
| * the result so that we'll get a timer that is monotonic. |
| */ |
| if (res >= USECS_PER_JIFFY) |
| res = USECS_PER_JIFFY-1; |
| } |
| |
| return res; |
| } |
| |
| |
| //#undef DO_WRITE_THROUGH |
| #define DO_WRITE_THROUGH |
| #define DO_ENABLE_CACHE |
| |
| extern char * __init prom_getcmdline(void); |
| static void jmr3927_board_init(void); |
| extern struct resource pci_io_resource; |
| extern struct resource pci_mem_resource; |
| |
| void __init plat_mem_setup(void) |
| { |
| char *argptr; |
| |
| set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); |
| |
| board_time_init = jmr3927_time_init; |
| board_timer_setup = jmr3927_timer_setup; |
| |
| _machine_restart = jmr3927_machine_restart; |
| _machine_halt = jmr3927_machine_halt; |
| pm_power_off = jmr3927_machine_power_off; |
| |
| /* |
| * IO/MEM resources. |
| */ |
| ioport_resource.start = pci_io_resource.start; |
| ioport_resource.end = pci_io_resource.end; |
| iomem_resource.start = 0; |
| iomem_resource.end = 0xffffffff; |
| |
| /* Reboot on panic */ |
| panic_timeout = 180; |
| |
| { |
| unsigned int conf; |
| conf = read_c0_conf(); |
| } |
| |
| #if 1 |
| /* cache setup */ |
| { |
| unsigned int conf; |
| #ifdef DO_ENABLE_CACHE |
| int mips_ic_disable = 0, mips_dc_disable = 0; |
| #else |
| int mips_ic_disable = 1, mips_dc_disable = 1; |
| #endif |
| #ifdef DO_WRITE_THROUGH |
| int mips_config_cwfon = 0; |
| int mips_config_wbon = 0; |
| #else |
| int mips_config_cwfon = 1; |
| int mips_config_wbon = 1; |
| #endif |
| |
| conf = read_c0_conf(); |
| conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); |
| conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; |
| conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; |
| conf |= mips_config_wbon ? TX39_CONF_WBON : 0; |
| conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; |
| |
| write_c0_conf(conf); |
| write_c0_cache(0); |
| } |
| #endif |
| |
| /* initialize board */ |
| jmr3927_board_init(); |
| |
| argptr = prom_getcmdline(); |
| |
| if ((argptr = strstr(argptr, "toeon")) != NULL) { |
| jmr3927_ccfg_toeon = 1; |
| } |
| argptr = prom_getcmdline(); |
| if ((argptr = strstr(argptr, "ip=")) == NULL) { |
| argptr = prom_getcmdline(); |
| strcat(argptr, " ip=bootp"); |
| } |
| |
| #ifdef CONFIG_SERIAL_TXX9 |
| { |
| extern int early_serial_txx9_setup(struct uart_port *port); |
| int i; |
| struct uart_port req; |
| for(i = 0; i < 2; i++) { |
| memset(&req, 0, sizeof(req)); |
| req.line = i; |
| req.iotype = UPIO_MEM; |
| req.membase = (char *)TX3927_SIO_REG(i); |
| req.mapbase = TX3927_SIO_REG(i); |
| req.irq = i == 0 ? |
| JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; |
| if (i == 0) |
| req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; |
| req.uartclk = JMR3927_IMCLK; |
| early_serial_txx9_setup(&req); |
| } |
| } |
| #ifdef CONFIG_SERIAL_TXX9_CONSOLE |
| argptr = prom_getcmdline(); |
| if ((argptr = strstr(argptr, "console=")) == NULL) { |
| argptr = prom_getcmdline(); |
| strcat(argptr, " console=ttyS1,115200"); |
| } |
| #endif |
| #endif |
| } |
| |
| static void tx3927_setup(void); |
| |
| #ifdef CONFIG_PCI |
| unsigned long mips_pci_io_base; |
| unsigned long mips_pci_io_size; |
| unsigned long mips_pci_mem_base; |
| unsigned long mips_pci_mem_size; |
| /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ |
| unsigned long mips_pci_io_pciaddr = 0; |
| #endif |
| |
| static void __init jmr3927_board_init(void) |
| { |
| char *argptr; |
| |
| #ifdef CONFIG_PCI |
| mips_pci_io_base = JMR3927_PCIIO; |
| mips_pci_io_size = JMR3927_PCIIO_SIZE; |
| mips_pci_mem_base = JMR3927_PCIMEM; |
| mips_pci_mem_size = JMR3927_PCIMEM_SIZE; |
| #endif |
| |
| tx3927_setup(); |
| |
| if (jmr3927_have_isac()) { |
| |
| #ifdef CONFIG_FB_E1355 |
| argptr = prom_getcmdline(); |
| if ((argptr = strstr(argptr, "video=")) == NULL) { |
| argptr = prom_getcmdline(); |
| strcat(argptr, " video=e1355fb:crt16h"); |
| } |
| #endif |
| |
| #ifdef CONFIG_BLK_DEV_IDE |
| /* overrides PCI-IDE */ |
| #endif |
| } |
| |
| /* SIO0 DTR on */ |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); |
| |
| jmr3927_led_set(0); |
| |
| |
| if (jmr3927_have_isac()) |
| jmr3927_io_led_set(0); |
| printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", |
| jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, |
| jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, |
| jmr3927_dipsw1(), jmr3927_dipsw2(), |
| jmr3927_dipsw3(), jmr3927_dipsw4()); |
| if (jmr3927_have_isac()) |
| printk("JMI-3927IO2 --- ISAC(Rev %d) DIPSW:%01x\n", |
| jmr3927_isac_reg_in(JMR3927_ISAC_REV_ADDR) & JMR3927_REV_MASK, |
| jmr3927_io_dipsw()); |
| } |
| |
| void __init tx3927_setup(void) |
| { |
| int i; |
| |
| /* SDRAMC are configured by PROM */ |
| |
| /* ROMC */ |
| tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048; |
| tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8; |
| tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; |
| tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; |
| |
| /* CCFG */ |
| /* enable Timeout BusError */ |
| if (jmr3927_ccfg_toeon) |
| tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; |
| |
| /* clear BusErrorOnWrite flag */ |
| tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; |
| /* Disable PCI snoop */ |
| tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; |
| |
| #ifdef DO_WRITE_THROUGH |
| /* Enable PCI SNOOP - with write through only */ |
| tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; |
| #endif |
| |
| /* Pin selection */ |
| tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; |
| tx3927_ccfgptr->pcfg |= |
| TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | |
| (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); |
| |
| printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", |
| tx3927_ccfgptr->crir, |
| tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); |
| |
| /* IRC */ |
| /* disable interrupt control */ |
| tx3927_ircptr->cer = 0; |
| /* mask all IRC interrupts */ |
| tx3927_ircptr->imr = 0; |
| for (i = 0; i < TX3927_NUM_IR / 2; i++) { |
| tx3927_ircptr->ilr[i] = 0; |
| } |
| /* setup IRC interrupt mode (Low Active) */ |
| for (i = 0; i < TX3927_NUM_IR / 8; i++) { |
| tx3927_ircptr->cr[i] = 0; |
| } |
| |
| /* TMR */ |
| /* disable all timers */ |
| for (i = 0; i < TX3927_NR_TMR; i++) { |
| tx3927_tmrptr(i)->tcr = TXx927_TMTCR_CRE; |
| tx3927_tmrptr(i)->tisr = 0; |
| tx3927_tmrptr(i)->cpra = 0xffffffff; |
| tx3927_tmrptr(i)->itmr = 0; |
| tx3927_tmrptr(i)->ccdr = 0; |
| tx3927_tmrptr(i)->pgmr = 0; |
| } |
| |
| /* DMA */ |
| tx3927_dmaptr->mcr = 0; |
| for (i = 0; i < sizeof(tx3927_dmaptr->ch) / sizeof(tx3927_dmaptr->ch[0]); i++) { |
| /* reset channel */ |
| tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; |
| tx3927_dmaptr->ch[i].ccr = 0; |
| } |
| /* enable DMA */ |
| #ifdef __BIG_ENDIAN |
| tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; |
| #else |
| tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; |
| #endif |
| |
| #ifdef CONFIG_PCI |
| /* PCIC */ |
| printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:", |
| tx3927_pcicptr->did, tx3927_pcicptr->vid, |
| tx3927_pcicptr->rid); |
| if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) { |
| printk("External\n"); |
| /* XXX */ |
| } else { |
| printk("Internal\n"); |
| |
| /* Reset PCI Bus */ |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); |
| udelay(100); |
| jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, |
| JMR3927_IOC_RESET_ADDR); |
| udelay(100); |
| jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); |
| |
| |
| /* Disable External PCI Config. Access */ |
| tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; |
| #ifdef __BIG_ENDIAN |
| tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | |
| TX3927_PCIC_LBC_TIBSE | |
| TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; |
| #endif |
| /* LB->PCI mappings */ |
| tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1); |
| tx3927_pcicptr->ilbioma = mips_pci_io_base; |
| tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr; |
| tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1); |
| tx3927_pcicptr->ilbmma = mips_pci_mem_base; |
| tx3927_pcicptr->ipbmma = mips_pci_mem_base; |
| /* PCI->LB mappings */ |
| tx3927_pcicptr->iobas = 0xffffffff; |
| tx3927_pcicptr->ioba = 0; |
| tx3927_pcicptr->tlbioma = 0; |
| tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1); |
| tx3927_pcicptr->mba = 0; |
| tx3927_pcicptr->tlbmma = 0; |
| #ifndef JMR3927_INIT_INDIRECT_PCI |
| /* Enable Direct mapping Address Space Decoder */ |
| tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; |
| #endif |
| |
| /* Clear All Local Bus Status */ |
| tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; |
| /* Enable All Local Bus Interrupts */ |
| tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; |
| /* Clear All PCI Status Error */ |
| tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; |
| /* Enable All PCI Status Error Interrupts */ |
| tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; |
| |
| /* PCIC Int => IRC IRQ10 */ |
| tx3927_pcicptr->il = TX3927_IR_PCI; |
| #if 1 |
| /* Target Control (per errata) */ |
| tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; |
| #endif |
| |
| /* Enable Bus Arbiter */ |
| #if 0 |
| tx3927_pcicptr->req_trace = 0x73737373; |
| #endif |
| tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; |
| |
| tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | |
| PCI_COMMAND_MEMORY | |
| #if 1 |
| PCI_COMMAND_IO | |
| #endif |
| PCI_COMMAND_PARITY | PCI_COMMAND_SERR; |
| } |
| #endif /* CONFIG_PCI */ |
| |
| /* PIO */ |
| /* PIO[15:12] connected to LEDs */ |
| tx3927_pioptr->dir = 0x0000f000; |
| tx3927_pioptr->maskcpu = 0; |
| tx3927_pioptr->maskext = 0; |
| { |
| unsigned int conf; |
| |
| conf = read_c0_conf(); |
| if (!(conf & TX39_CONF_ICE)) |
| printk("TX3927 I-Cache disabled.\n"); |
| if (!(conf & TX39_CONF_DCE)) |
| printk("TX3927 D-Cache disabled.\n"); |
| else if (!(conf & TX39_CONF_WBON)) |
| printk("TX3927 D-Cache WriteThrough.\n"); |
| else if (!(conf & TX39_CONF_CWFON)) |
| printk("TX3927 D-Cache WriteBack.\n"); |
| else |
| printk("TX3927 D-Cache WriteBack (CWF) .\n"); |
| } |
| } |