diff --git a/CREDITS b/CREDITS
index 40cc4bf..ec7e6c7 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3709,6 +3709,13 @@
 D: Co-author of German book ``Linux-Kernel-Programmierung''
 D: Co-founder of Berlin Linux User Group
 
+N: Andrew Victor
+E: linux@maxim.org.za
+W: http://maxim.org.za/at91_26.html
+D: First maintainer of Atmel ARM-based SoC, aka AT91
+D: Introduced support for at91rm9200, the first chip of AT91 family
+S: South Africa
+
 N: Riku Voipio
 E: riku.voipio@iki.fi
 D: Author of PCA9532 LED and Fintek f75375s hwmon driver
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 653d5d7..31d1d65 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -505,7 +505,10 @@
 
 The addresses are normal I2C addresses.  The adapter is the string
 name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
-It is *NOT* i2c-<n> itself.
+It is *NOT* i2c-<n> itself.  Also, the comparison is done ignoring
+spaces, so if the name is "This is an I2C chip" you can say
+adapter_name=ThisisanI2cchip.  This is because it's hard to pass in
+spaces in kernel parameters.
 
 The debug flags are bit flags for each BMC found, they are:
 IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index 750401f..15dfce7 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -253,7 +253,7 @@
 GPIO support
 ~~~~~~~~~~~~
 ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
-and GpioInt. These resources are used be used to pass GPIO numbers used by
+and GpioInt. These resources can be used to pass GPIO numbers used by
 the device to the driver. ACPI 5.1 extended this with _DSD (Device
 Specific Data) which made it possible to name the GPIOs among other things.
 
diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt
index ae36fcf..f35dad1 100644
--- a/Documentation/acpi/gpio-properties.txt
+++ b/Documentation/acpi/gpio-properties.txt
@@ -1,9 +1,9 @@
 _DSD Device Properties Related to GPIO
 --------------------------------------
 
-With the release of ACPI 5.1 and the _DSD configuration objecte names
-can finally be given to GPIOs (and other things as well) returned by
-_CRS.  Previously, we were only able to use an integer index to find
+With the release of ACPI 5.1, the _DSD configuration object finally
+allows names to be given to GPIOs (and other things as well) returned
+by _CRS.  Previously, we were only able to use an integer index to find
 the corresponding GPIO, which is pretty error prone (it depends on
 the _CRS output ordering, for example).
 
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index 974624e..161448d 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -6,6 +6,7 @@
 Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
+               Should be "ti,omap5-l3-noc" for OMAP5 family
 	       Should be "ti,dra7-l3-noc" for DRA7 family
                Should be "ti,am4372-l3-noc" for AM43 family
 - reg:	Contains L3 register address range for each noc domain.
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
index a4873e5..e30e184 100644
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -38,7 +38,7 @@
 		      80 81 68 69
 		      70 71 72 73
 		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 			  "saif0", "saif1", "i2c0", "i2c1",
 			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
new file mode 100644
index 0000000..be78968
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
@@ -0,0 +1,30 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+        "abracon,abx80x"
+        "abracon,ab0801"
+        "abracon,ab0803"
+        "abracon,ab0804"
+        "abracon,ab0805"
+        "abracon,ab1801"
+        "abracon,ab1803"
+        "abracon,ab1804"
+        "abracon,ab1805"
+	Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+                          resistor, the other values are in ohm.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8033919..6a99dda 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -52,6 +52,7 @@
 cortina	Cortina Systems, Inc.
 cosmic	Cosmic Circuits
 crystalfontz	Crystalfontz America, Inc.
+cubietech	Cubietech, Ltd.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
 davicom	DAVICOM Semiconductor, Inc.
 denx	Denx Software Engineering
@@ -202,6 +203,7 @@
 via	VIA Technologies, Inc.
 virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 voipac	Voipac Technologies s.r.o.
+wexler	Wexler
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics
 wm	Wondermedia Technologies, Inc.
diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt
index 092fc10..4692241 100644
--- a/Documentation/kasan.txt
+++ b/Documentation/kasan.txt
@@ -9,7 +9,9 @@
 bugs.
 
 KASan uses compile-time instrumentation for checking every memory access,
-therefore you will need a certain version of GCC > 4.9.2
+therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
+of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
+used to built the kernel.
 
 Currently KASan is supported only for x86_64 architecture and requires that the
 kernel be built with the SLUB allocator.
@@ -23,8 +25,8 @@
 
 and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
 is compiler instrumentation types. The former produces smaller binary the
-latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
-latter.
+latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
+of 5.0 or later.
 
 Currently KASAN works only with the SLUB memory allocator.
 For better bug detection and nicer report, enable CONFIG_STACKTRACE and put
diff --git a/MAINTAINERS b/MAINTAINERS
index 781e099..590304b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -892,11 +892,10 @@
 F:	arch/arm/mach-alpine/
 
 ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
-M:	Andrew Victor <linux@maxim.org.za>
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
 M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://maxim.org.za/at91_26.html
 W:	http://www.linux4sam.org
 S:	Supported
 F:	arch/arm/mach-at91/
@@ -990,6 +989,12 @@
 F:	drivers/clocksource/timer-atlas7.c
 N:	[^a-z]sirf
 
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M:	Baruch Siach <baruch@tkos.co.il>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+N:	digicolor
+
 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1439,9 +1444,10 @@
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
+F:	arch/arm/boot/dts/socfpga*
+F:	arch/arm/configs/socfpga_defconfig
 W:	http://www.rocketboards.org
-T:	git://git.rocketboards.org/linux-socfpga.git
-T:	git://git.rocketboards.org/linux-socfpga-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
@@ -2116,8 +2122,9 @@
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M:	Christian Daudt <bcm@fixthebug.org>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Ray Jui <rjui@broadcom.com>
+M:	Scott Branden <sbranden@broadcom.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
@@ -2168,7 +2175,6 @@
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Marc Carino <marc.ceeeee@gmail.com>
 M:	Brian Norris <computersforpeace@gmail.com>
 M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
@@ -5042,17 +5048,19 @@
 F:	drivers/video/fbdev/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-M:	Roland Dreier <roland@kernel.org>
+M:	Doug Ledford <dledford@redhat.com>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org
 W:	http://www.openfabrics.org/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
+T:	git git://github.com/dledford/linux.git
 S:	Supported
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
 F:	include/uapi/linux/if_infiniband.h
+F:	include/uapi/rdma/
+F:	include/rdma/
 
 INOTIFY
 M:	John McCutchan <john@johnmccutchan.com>
@@ -5805,6 +5813,7 @@
 LED SUBSYSTEM
 M:	Bryan Wu <cooloney@gmail.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
+M:	Jacek Anaszewski <j.anaszewski@samsung.com>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
 S:	Maintained
@@ -11037,6 +11046,7 @@
 ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
 M:	Minchan Kim <minchan@kernel.org>
 M:	Nitin Gupta <ngupta@vflare.org>
+R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/zram/
diff --git a/Makefile b/Makefile
index 2da553f..eae539d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 86217db..49b2bf7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -20,9 +20,9 @@
 	tny_a9263.dtb \
 	usb_a9263.dtb \
 	at91-foxg20.dtb \
+	at91-kizbox.dtb \
 	at91sam9g20ek.dtb \
 	at91sam9g20ek_2mmc.dtb \
-	kizbox.dtb \
 	tny_a9g20.dtb \
 	usb_a9g20.dtb \
 	usb_a9g20_lpw.dtb \
@@ -32,12 +32,14 @@
 	at91sam9rlek.dtb \
 	at91-ariag25.dtb \
 	at91-cosino_mega2560.dtb \
+	at91-kizboxmini.dtb \
 	at91sam9g15ek.dtb \
 	at91sam9g25ek.dtb \
 	at91sam9g35ek.dtb \
 	at91sam9x25ek.dtb \
 	at91sam9x35ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-kizbox2.dtb \
 	at91-sama5d3_xplained.dtb \
 	sama5d31ek.dtb \
 	sama5d33ek.dtb \
@@ -496,7 +498,7 @@
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_socdk.dtb \
+	socfpga_arria10_socdk_sdmmc.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
@@ -525,26 +527,31 @@
 	sun4i-a10-ba10-tvbox.dtb \
 	sun4i-a10-chuwi-v7-cw0825.dtb \
 	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-mk802.dtb \
 	sun4i-a10-mk802ii.dtb \
-	sun4i-a10-hackberry.dtb \
-	sun4i-a10-hyundai-a7hd.dtb \
-	sun4i-a10-inet97fv2.dtb \
 	sun4i-a10-olinuxino-lime.dtb \
 	sun4i-a10-pcduino.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a10s-r7-tv-dongle.dtb \
 	sun5i-a13-hsg-h702.dtb \
 	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-utoo-p66.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
 	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
 	sun6i-a31-m9.dtb \
 	sun6i-a31s-cs908.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
@@ -555,15 +562,21 @@
 	sun7i-a20-hummingbird.dtb \
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-micro.dtb \
-	sun7i-a20-pcduino3.dtb
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb
 dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-ippo-q8h-v5.dtb \
 	sun8i-a23-ippo-q8h-v1.2.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
-	sun9i-a80-optimus.dtb
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
@@ -600,6 +613,11 @@
 	ste-hrefv60plus-tvk.dtb \
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ph1-sld3-ref.dtb \
+	uniphier-ph1-ld4-ref.dtb \
+	uniphier-ph1-pro4-ref.dtb \
+	uniphier-ph1-sld8-ref.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 8ae29c9..c17097d 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -49,7 +49,7 @@
 		pinctrl-0 = <&matrix_keypad_pins>;
 
 		debounce-delay-ms = <5>;
-		col-scan-delay-us = <1500>;
+		col-scan-delay-us = <5>;
 
 		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
 				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
@@ -473,7 +473,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <31 0>;
 
-		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <272>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 15f198e..7128fad 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -18,6 +18,7 @@
 	aliases {
 		rtc0 = &mcp_rtc;
 		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
 	};
 
 	memory {
@@ -83,7 +84,7 @@
 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
@@ -130,8 +131,8 @@
 
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 		>;
 	};
 
@@ -455,7 +456,7 @@
 	mcp_rtc: rtc@6f {
 		compatible = "microchip,mcp7941x";
 		reg = <0x6f>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>;  /* IRQ_SYS_1N */
+		interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;  /* IRQ_SYS_1N */
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcp79410_pins_default>;
@@ -478,7 +479,7 @@
 &uart3 {
 	status = "okay";
 	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x248>;
+			      <&dra7_pmx_core 0x3f8>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins_default>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index e3b08fb..990e8a2 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -105,6 +105,10 @@
 		};
 
 		internal-regs {
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
 			serial@12000 {
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
new file mode 100644
index 0000000..b567b5f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -0,0 +1,159 @@
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox";
+	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		linux,stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x2000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			macb0: ethernet@fffc4000 {
+				phy-mode = "mii";
+				pinctrl-0 = <&pinctrl_macb_rmii
+				             &pinctrl_macb_rmii_mii_alt>;
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				timeout-sec = <15>;
+				atmel,max-heartbeat-sec = <16>;
+				atmel,min-heartbeat-sec = <0>;
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			status = "okay";
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+
+		user {
+			label = "PB_USER";
+			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		rtc: pcf8563@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		network_green {
+			label = "pwm:green:network";
+			pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		network_red {
+			label = "pwm:red:network";
+			pwms = <&tcb_pwm 3 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		user_green {
+			label = "pwm:green:user";
+			pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		user_red {
+			label = "pwm:red:user";
+			pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	tcb_pwm: pwm {
+		compatible = "atmel,tcb-pwm";
+		#pwm-cells = <3>;
+		tc-block = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa0
+			     &pinctrl_tcb1_tioa1
+			     &pinctrl_tcb1_tioa2
+			     &pinctrl_tcb1_tiob0>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
new file mode 100644
index 0000000..a458e37
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -0,0 +1,216 @@
+/*
+ * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox 2";
+	compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		linux,stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "okay";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vled_reg: LDO_REG3 {
+							regulator-name = "VLED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						v3v8_rf_reg: LDO_REG4 {
+							regulator-name = "V3V8_RF";
+							regulator-min-microvolt = <3800000>;
+							regulator-max-microvolt = <3800000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				status = "okay";
+			};
+
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+					     &pinctrl_pwm0_pwmh1_1
+					     &pinctrl_pwm0_pwmh2_0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-vref = <3333>;
+				status = "okay";
+			};
+
+			usart2: serial@f8020000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb1: ohci@00600000 {
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		prog {
+			label = "PB_PROG";
+			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			gpio-key,wakeup;
+		};
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+
+		user {
+			label = "PB_USER";
+			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			gpio-key,wakeup;
+		};
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		blue {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		green {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		red {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
new file mode 100644
index 0000000..4611f22
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -0,0 +1,129 @@
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox mini";
+	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		linux,stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			pwm0: pwm@f8034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+					     &pinctrl_pwm0_pwm1_1>;
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00600000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		prog {
+			label = "PB_PROG";
+			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			gpio-key,wakeup;
+		};
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		green {
+			label = "pwm:green:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		red {
+			label = "pwm:red:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 9991240..d9263cf 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -215,12 +215,6 @@
 					};
 				};
 			};
-
-			pmc: pmc@fffffc00 {
-				main: mainck {
-					clock-frequency = <12000000>;
-				};
-			};
 		};
 
 		nand0: nand@60000000 {
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 9be5b54..d9299be3 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -181,12 +181,6 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				main: mainck {
-					clock-frequency = <12000000>;
-				};
-			};
-
 			watchdog@fffffd40 {
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 3aa56ae..9c236c3 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -694,6 +694,52 @@
 					};
 				};
 
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins =
+							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins =
+							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
 				tcb0 {
 					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index c20cf53..24c935c 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index 490c080..af33326 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -82,6 +82,12 @@
 		clocks = <&main_clk>;
 	};
 
+	rtc@f0000c30 {
+		compatible = "cnxt,cx92755-rtc";
+		reg = <0xf0000c30 0x18>;
+		interrupts = <25>;
+	};
+
 	uc_regs: syscon@f00003a0 {
 		compatible = "cnxt,cx92755-uc", "syscon";
 		reg = <0xf00003a0 0x10>;
@@ -110,4 +116,15 @@
 		interrupts = <46>;
 		status = "disabled";
 	};
+
+	i2c: i2c@f0000120 {
+		compatible = "cnxt,cx92755-i2c";
+		reg = <0xf0000120 0x10>;
+		interrupts = <28>;
+		clocks = <&main_clk>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
index f33bf56..90d52cc 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cx92755_equinox.dts
@@ -72,3 +72,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&i2c {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5332b57..f03a091 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -911,7 +911,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
 			      <0x4ae0c158 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -944,7 +944,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
 			      <0x4a002470 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -977,7 +977,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
 			      <0x4a00246c 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -1010,7 +1010,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
 			      <0x4ae0c154 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -1203,7 +1203,7 @@
 			status = "disabled";
 		};
 
-		rtc@48838000 {
+		rtc: rtc@48838000 {
 			compatible = "ti,am3352-rtc";
 			reg = <0x48838000 0x100>;
 			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 8de12af7..d6b49e5 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/sound/samsung-i2s.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/maxim,max77686.h>
 #include "exynos4412.dtsi"
 
 / {
@@ -105,6 +106,8 @@
 
 	rtc@10070000 {
 		status = "okay";
+		clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};
 
 	g2d@10800000 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 2657e84..1eca97e 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -567,6 +567,7 @@
 	num-slots = <1>;
 	broken-cd;
 	cap-sdio-irq;
+	keep-power-in-suspend;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
index 5d31fc1..2180a01 100644
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -28,7 +28,7 @@
 		type = "active";
 	};
 	cpu-crit-0 {
-		temperature = <1200000>; /* millicelsius */
+		temperature = <120000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
 	};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index f67b23f..4531753 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -536,6 +536,7 @@
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
+		power-domains = <&disp_pd>;
 	};
 
 	mipi_phy: video-phy@10040714 {
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
index 48adfa8..356e963 100644
--- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
@@ -18,7 +18,7 @@
 		type = "active";
 	};
 	cpu-crit-0 {
-		temperature = <1050000>; /* millicelsius */
+		temperature = <105000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
 	};
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index 40a9e33..ba04dd5 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -28,5 +28,32 @@
 		uart0: uart@4007000 {
 			status = "ok";
 		};
+
+		nand: nand@4020000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <16>;
+			nand-ecc-step-size = <1024>;
+
+			partition@0 {
+				label = "nand_text";
+				reg = <0x00000000 0x00400000>;
+			};
+
+			partition@00400000 {
+				label = "nand_monitor";
+				reg = <0x00400000 0x00400000>;
+			};
+
+			partition@00800000 {
+				label = "nand_kernel";
+				reg = <0x00800000 0x00800000>;
+			};
+
+			partition@01000000 {
+				label = "nand_fs";
+				reg = <0x01000000 0x1f000000>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f2..6434b7f 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -269,6 +269,139 @@
 			interrupts = <0 372 4>;
 		};
 
+		gpio@4003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4003000 0x1000>;
+
+			gpio3: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 392 4>;
+			};
+		};
+
+		gpio@4002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4002000 0x1000>;
+
+			gpio2: gpio-controller@0 {
+			compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 391 4>;
+			};
+		};
+
+		gpio@4001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4001000 0x1000>;
+
+			gpio1: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 390 4>;
+			};
+		};
+
+		gpio@4000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4000000 0x1000>;
+
+			gpio0: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 389 4>;
+			};
+		};
+
+		nand: nand@4020000 {
+			compatible = "hisilicon,504-nfc";
+			reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+			interrupts = <0 379 4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		mdio {
+			compatible = "hisilicon,hip04-mdio";
+			reg = <0x28f1000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				marvell,reg-init = <18 0x14 0 0x8001>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+				marvell,reg-init = <18 0x14 0 0x8001>;
+			};
+		};
+
+		ppe: ppe@28c0000 {
+			compatible = "hisilicon,hip04-ppe", "syscon";
+			reg = <0x28c0000 0x10000>;
+		};
+
+		fe: ethernet@28b0000 {
+			compatible = "hisilicon,hip04-mac";
+			reg = <0x28b0000 0x10000>;
+			interrupts = <0 413 4>;
+			phy-mode = "mii";
+			port-handle = <&ppe 31 0>;
+		};
+
+		ge0: ethernet@2800000 {
+			compatible = "hisilicon,hip04-mac";
+			reg = <0x2800000 0x10000>;
+			interrupts = <0 402 4>;
+			phy-mode = "sgmii";
+			port-handle = <&ppe 0 1>;
+			phy-handle = <&phy0>;
+		};
+
+		ge8: ethernet@2880000 {
+			compatible = "hisilicon,hip04-mac";
+			reg = <0x2880000 0x10000>;
+			interrupts = <0 410 4>;
+			phy-mode = "sgmii";
+			port-handle = <&ppe 8 2>;
+			phy-handle = <&phy1>;
+		};
 	};
 
 	etb@0,e3c42000 {
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 7e6eef2..8204539 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -12,6 +12,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx23.dtsi"
 
 / {
@@ -93,6 +94,7 @@
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			dr_mode = "host";
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
@@ -122,7 +124,7 @@
 
 		user {
 			label = "green";
-			gpios = <&gpio2 1 1>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index e4d3aec..677f81d 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -428,6 +428,7 @@
 
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
 				reg = <0x53fc8000 0x4000>;
 				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 25e25f8..4e073e8 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -913,7 +913,7 @@
 					      80 81 68 69
 					      70 71 72 73
 					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 						  "saif0", "saif1", "i2c0", "i2c1",
 						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 19cc269..1ce6133 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -31,6 +31,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 15 0>;
+			enable-active-high;
 		};
 
 		reg_usb_h1_vbus: regulator@1 {
@@ -40,6 +41,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 0 0>;
+			enable-active-high;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 46b2fed..3b24b126 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -185,7 +185,6 @@
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	max7310_a: gpio@30 {
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
deleted file mode 100644
index e83e4f9..0000000
--- a/arch/arm/boot/dts/kizbox.dts
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-
-	model = "Overkiz kizbox";
-	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
-	};
-
-	memory {
-		reg = <0x20000000 0x2000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			status = "okay";
-
-			bootloaderkernel@0 {
-				label = "bootloader-kernel";
-				reg = <0x0 0xc0000>;
-			};
-
-			ubi@c0000 {
-				label = "ubi";
-				reg = <0xc0000 0x7f40000>;
-			};
-
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-	};
-
-	i2c@0 {
-		status = "okay";
-
-		pcf8563@51 {
-			/* nxp pcf8563 rtc */
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1g {
-			label = "led1:green";
-			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led1r {
-			label = "led1:red";
-			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led2g {
-			label = "led2:green";
-			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		led2r {
-			label = "led2:red";
-			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset {
-			label = "reset";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			gpio-key,wakeup;
-		};
-
-		mode {
-			label = "mode";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index a293158..5c16145 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -498,6 +498,8 @@
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <1>;
 	};
 
 	tlv320aic3x_aux: tlv320aic3x@19 {
@@ -509,6 +511,8 @@
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <2>;
 	};
 
 	tsl2563: tsl2563@29 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index d18a90f..69a40cf 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -456,6 +456,7 @@
 		};
 
 		mmu_isp: mmu@480bd400 {
+			#iommu-cells = <0>;
 			compatible = "ti,omap2-iommu";
 			reg = <0x480bd400 0x80>;
 			interrupts = <24>;
@@ -464,6 +465,7 @@
 		};
 
 		mmu_iva: mmu@5d000000 {
+			#iommu-cells = <0>;
 			compatible = "ti,omap2-iommu";
 			reg = <0x5d000000 0x80>;
 			interrupts = <28>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index efe5f73..7d24ae0 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -128,7 +128,7 @@
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "ti,omap5-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 74c3212..824ddab 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -545,7 +545,7 @@
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index bdf8570..225a0eb 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -152,6 +152,7 @@
 		compatible = "active-semi,act8846";
 		reg = <0x5a>;
 		status = "okay";
+		system-power-controller;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&act8846_dvs0_ctl>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 4a45751..41f5f2a 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -112,6 +112,23 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	/*
+	 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
+	 * vcc_io directly.  Those boards won't be able to power cycle SD cards
+	 * but it shouldn't hurt to toggle this pin there anyway.
+	 */
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
 };
 
 &emmc {
@@ -141,6 +158,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	status = "okay";
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 };
 
 &i2c0 {
@@ -232,6 +251,10 @@
 		sdmmc_cmd: sdmmc-cmd {
 			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
 		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	usb {
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index b54dd78..0b42372 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -246,6 +246,14 @@
 		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
 		system-power-controller;
 
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
 		regulators {
 			vcc_ddr: REG1 {
 				regulator-name = "vcc_ddr";
@@ -457,6 +465,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index d081f0e..d582811 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -406,6 +406,12 @@
 	};
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
 &vopb {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 165968d..280aecd 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -44,6 +44,14 @@
 		spi2 = &spi2;
 	};
 
+	arm-pmu {
+		compatible = "arm,cortex-a12-pmu";
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -434,6 +442,7 @@
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_USBHOST1>;
 		clock-names = "otg";
+		dr_mode = "host";
 		phys = <&usbphy2>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -446,6 +455,11 @@
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG0>;
 		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
 		phys = <&usbphy0>;
 		phy-names = "usb2-phy";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 7d6babd..ef404e9 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -67,12 +67,6 @@
 					rxd3-skew-ps = <400>;
 				};
 			};
-
-			pmc: pmc@fffffc00 {
-				main: mainck {
-					clock-frequency = <12000000>;
-				};
-			};
 		};
 
 		nand0: nand@60000000 {
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 5cefa82..9b653ed 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -451,6 +451,14 @@
 						clk-phase = <0 135>;
 					};
 
+					sdmmc_clk_divided: sdmmc_clk_divided {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&sdmmc_clk>;
+						clk-gate = <0xa0 8>;
+						fixed-divider = <4>;
+					};
+
 					nand_x_clk: nand_x_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
@@ -488,6 +496,8 @@
 			reset-names = "stmmaceth";
 			snps,multicast-filter-bins = <256>;
 			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
 			status = "disabled";
 		};
 
@@ -504,6 +514,8 @@
 			reset-names = "stmmaceth";
 			snps,multicast-filter-bins = <256>;
 			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
 			status = "disabled";
 		};
 
@@ -635,7 +647,7 @@
 			fifo-depth = <0x400>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 8a05c47..abf9763 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -21,18 +21,6 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	aliases {
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac1;
-		ethernet2 = &gmac2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		timer0 = &timer0;
-		timer1 = &timer1;
-		timer2 = &timer2;
-		timer3 = &timer3;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -98,6 +86,21 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					cb_intosc_ls_clk: cb_intosc_ls_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_free_clk: f2s_free_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
 					osc1: osc1 {
 						#clock-cells = <0>;
 						compatible = "fixed-clock";
@@ -107,16 +110,286 @@
 						#address-cells = <1>;
 						#size-cells = <0>;
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x40>;
+
+						main_mpu_base_clk: main_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x140 0 11>;
+						};
+
+						main_noc_base_clk: main_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x144 0 11>;
+						};
+
+						main_emaca_clk: main_emaca_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x68>;
+						};
+
+						main_emacb_clk: main_emacb_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x6C>;
+						};
+
+						main_emac_ptp_clk: main_emac_ptp_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x70>;
+						};
+
+						main_gpio_db_clk: main_gpio_db_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x74>;
+						};
+
+						main_sdmmc_clk: main_sdmmc_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk"
+;
+							clocks = <&main_pll>;
+							reg = <0x78>;
+						};
+
+						main_s2f_usr0_clk: main_s2f_usr0_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x7C>;
+						};
+
+						main_s2f_usr1_clk: main_s2f_usr1_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x80>;
+						};
+
+						main_hmc_pll_ref_clk: main_hmc_pll_ref_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x84>;
+						};
+
+						main_periph_ref_clk: main_periph_ref_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x9C>;
+						};
 					};
 
 					periph_pll: periph_pll {
 						#address-cells = <1>;
 						#size-cells = <0>;
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>, <&main_periph_ref_clk>;
+						reg = <0xC0>;
+
+						peri_mpu_base_clk: peri_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x140 16 11>;
+						};
+
+						peri_noc_base_clk: peri_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x144 16 11>;
+						};
+
+						peri_emaca_clk: peri_emaca_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xE8>;
+						};
+
+						peri_emacb_clk: peri_emacb_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xEC>;
+						};
+
+						peri_emac_ptp_clk: peri_emac_ptp_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF0>;
+						};
+
+						peri_gpio_db_clk: peri_gpio_db_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF4>;
+						};
+
+						peri_sdmmc_clk: peri_sdmmc_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF8>;
+						};
+
+						peri_s2f_usr0_clk: peri_s2f_usr0_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xFC>;
+						};
+
+						peri_s2f_usr1_clk: peri_s2f_usr1_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x100>;
+						};
+
+						peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x104>;
+						};
+					};
+
+					mpu_free_clk: mpu_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x60>;
+					};
+
+					noc_free_clk: noc_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x64>;
+					};
+
+					s2f_user1_free_clk: s2f_user1_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x104>;
+					};
+
+					sdmmc_free_clk: sdmmc_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						fixed-divider = <4>;
+						reg = <0xF8>;
+					};
+
+					l4_sys_free_clk: l4_sys_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&noc_free_clk>;
+						fixed-divider = <4>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 0 2>;
+						clk-gate = <0x48 1>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 8 2>;
+						clk-gate = <0x48 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 16 2>;
+						clk-gate = <0x48 3>;
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&mpu_free_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0x48 0>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&sdmmc_free_clk>;
+						clk-gate = <0xC8 5>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 11>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 9>;
+					};
+
+					usb_clk: usb_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 8>;
+					};
+
+					s2f_usr1_clk: s2f_usr1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&peri_s2f_usr1_clk>;
+						clk-gate = <0xC8 6>;
 					};
 				};
 		};
@@ -128,6 +401,8 @@
 			interrupt-names = "macirq";
 			/* Filled in by bootloader */
 			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
 			status = "disabled";
 		};
 
@@ -138,6 +413,10 @@
 			interrupt-names = "macirq";
 			/* Filled in by bootloader */
 			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
 			status = "disabled";
 		};
 
@@ -148,6 +427,10 @@
 			interrupt-names = "macirq";
 			/* Filled in by bootloader */
 			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
 			status = "disabled";
 		};
 
@@ -268,6 +551,9 @@
 			reg = <0xff808000 0x1000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			fifo-depth = <0x400>;
+			clocks = <&l4_mp_clk>, <&sdmmc_free_clk>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
 		};
 
 		ocram: sram@ffe00000 {
@@ -284,6 +570,7 @@
 		sysmgr: sysmgr@ffd06000 {
 			compatible = "altr,sys-mgr", "syscon";
 			reg = <0xffd06000 0x300>;
+			cpu1-start-addr = <0xffd06230>;
 		};
 
 		/* Local timer */
@@ -291,30 +578,39 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xffffc600 0x100>;
 			interrupts = <1 13 0xf04>;
+			clocks = <&mpu_periph_clk>;
 		};
 
 		timer0: timer0@ffc02700 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xffc02700 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
 		};
 
 		timer1: timer1@ffc02800 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xffc02800 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xffd00000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
 		};
 
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xffd01000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
@@ -323,6 +619,7 @@
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		uart1: serial1@ffc02100 {
@@ -331,6 +628,8 @@
 			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
 		};
 
 		usbphy0: usbphy@0 {
@@ -343,6 +642,8 @@
 			compatible = "snps,dwc2";
 			reg = <0xffb00000 0xffff>;
 			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
@@ -361,6 +662,7 @@
 			compatible = "snps,dw-wdt";
 			reg = <0xffd00200 0x100>;
 			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
 			status = "disabled";
 		};
 
@@ -368,6 +670,7 @@
 			compatible = "snps,dw-wdt";
 			reg = <0xffd00300 0x100>;
 			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dts b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
old mode 100755
new mode 100644
similarity index 89%
rename from arch/arm/boot/dts/socfpga_arria10_socdk.dts
rename to arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 3015ce8..347ca4e
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,8 +14,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-
-/dts-v1/;
 #include "socfpga_arria10.dtsi"
 
 / {
@@ -40,9 +38,9 @@
 				};
 			};
 		};
-
-		serial0@ffc02000 {
-			status = "okay";
-		};
 	};
 };
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 0000000..dbbb751
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 16ea6f5..71468a7 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -68,3 +68,19 @@
 &usb1 {
 	status = "okay";
 };
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c1{
+	status = "okay";
+
+	accel1: accel1@53{
+		compatible = "adxl34x";
+		reg = <0x53>;
+
+		interrupt-parent = < &portc >;
+		interrupts = <3 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index bfd3f1c..5b876f2 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -22,6 +22,160 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		cpus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpu-map {
+				cluster0 {
+					core0 {
+						cpu = <&CPU0>;
+					};
+					core1 {
+						cpu = <&CPU1>;
+					};
+				};
+			};
+			CPU0: cpu@0 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a9";
+				reg = <0>;
+			};
+			CPU1: cpu@1 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a9";
+				reg = <1>;
+			};
+		};
+
+		ptm@801ae000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801ae000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU0>;
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+
+		ptm@801af000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801af000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU1>;
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+
+		funnel@801a6000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x801a6000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel output ports */
+				port@0 {
+					reg = <0>;
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+
+				/* funnel input ports */
+				port@1 {
+					reg = <0>;
+					funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <1>;
+					funnel_in_port1: endpoint {
+						slave-mode;
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-replicator";
+			clocks = <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* replicator output ports */
+				port@0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etb_in_port>;
+					};
+				};
+
+				/* replicator input port */
+				port@2 {
+					reg = <0>;
+					replicator_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		tpiu@80190000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x80190000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			port {
+				tpiu_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+
+		etb@801a4000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0x801a4000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			port {
+				etb_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+
 		intc: interrupt-controller@a0411000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
@@ -1017,23 +1171,6 @@
 			status = "disabled";
 		};
 
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-			enable-active-high;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-
-			status = "disabled";
-		};
-
 		mcde@a0350000 {
 			compatible = "stericsson,mcde";
 			reg = <0xa0350000 0x1000>, /* MCDE */
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 7d4f818..78b7525 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -77,6 +77,34 @@
 			};
 		};
 
+		/* Sensors mounted on this board variant */
+		i2c@80128000 {
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_stuib_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+			ak8974@0f {
+				/* Magnetometer */
+				compatible = "asahi-kasei,ak8974";
+				reg = <0x0f>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&magneto_stuib_mode>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
 		i2c@80110000 {
 			bu21013_tp@5c {
 				compatible = "rohm,bu21013_tp";
@@ -116,6 +144,28 @@
 					};
 				};
 			};
+			accelerometer {
+				accel_stuib_mode: accel_stuib {
+					/* Accelerometer interrupt lines 1 & 2 */
+					stuib_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			magnetometer {
+				magneto_stuib_mode: magneto_stuib {
+					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+					stuib_cfg1 {
+						pins = "GPIO31_V3";
+						ste,config = <&gpio_in_pu>;
+					};
+					stuib_cfg2 {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 062c6aa..0e1c969 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -99,10 +99,13 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
 			};
-			lsm303dlm@1e {
+			lsm303dlh@1e {
 				/* Magnetometer */
-				compatible = "st,lsm303dlm-magn";
+				compatible = "st,lsm303dlh-magn";
 				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index bf8f0ed..744c1e3 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -111,6 +111,21 @@
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 206826a..9edadc3 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -146,8 +146,21 @@
 		};
 
 		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
 			gpios = <&gpio7 4 0x4>;
 			enable-gpio = <&gpio6 25 0x4>;
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
 		};
 
 		// External Micro SD slot
@@ -249,15 +262,19 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_snowball_mode>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
+					     <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
 			};
-			lsm303dlm@1e {
+			lsm303dlh@1e {
 				/* Magnetometer */
-				compatible = "st,lsm303dlm-magn";
+				compatible = "st,lsm303dlh-magn";
 				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&magneto_snowball_mode>;
+				gpios = <&gpio5 5 0x4>; /* DRDY line */
 			};
 			l3g4200d@68 {
 				/* Gyroscope */
@@ -266,6 +283,11 @@
 				reg = <0x68>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_snowball_mode>;
+				gpios = <&gpio5 6 0x4>; /* DRDY line */
+				interrupt-parent = <&gpio5>;
+				interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
 			};
 			lsp001wm@5c {
 				/* Barometer/pressure sensor */
@@ -476,6 +498,16 @@
 					};
 				};
 			};
+			gyro {
+				gyro_snowball_mode: gyro_snowball {
+					snowball_cfg1 {
+						pins =
+						"GPIO166_A22", /* DRDY */
+						"GPIO169_D22"; /* INT */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
 			magnetometer {
 				magneto_snowball_mode: magneto_snowball {
 					snowball_cfg1 {
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c06a546..85159b8 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -7,6 +7,8 @@
  * publishhed by the Free Software Foundation.
  */
 #include "stih407-pinctrl.dtsi"
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/reset-controller/stih407-resets.h>
 / {
 	#address-cells = <1>;
@@ -336,5 +338,183 @@
 				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 			};
 		};
+
+		spi@9840000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9840000 0x110>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-0 = <&pinctrl_spi0_default>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9841000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9842000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9843000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9844000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		/* SBC SSC */
+		spi@9540000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9541000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9542000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9542000 0x110>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		mmc0: sdhci@09060000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+			reg-names = "mmc", "top-mmc-delay";
+			interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mmc0>;
+			clock-names = "mmc";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			bus-width = <8>;
+			non-removable;
+		};
+
+		mmc1: sdhci@09080000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09080000 0x7ff>;
+			reg-names = "mmc";
+			interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clock-names = "mmc";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			resets = <&softreset STIH407_MMC1_SOFTRESET>;
+			bus-width = <4>;
+		};
+
+		/* Watchdog and Real-Time Clock */
+		lpc@8787000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8787000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+			timeout-sec = <120>;
+			st,syscfg = <&syscfg_core>;
+			st,lpc-mode = <ST_LPC_MODE_WDT>;
+		};
+
+		lpc@8788000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8788000 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+			st,lpc-mode = <ST_LPC_MODE_RTC>;
+		};
+
+		sata0: sata@9b20000 {
+			compatible = "st,ahci";
+			reg = <0x9b20000 0x1000>;
+
+			interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port0 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+				 <&softreset STIH407_SATA0_SOFTRESET>,
+				 <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			status = "disabled";
+		};
+
+		sata1: sata@9b28000 {
+			compatible = "st,ahci";
+			reg = <0x9b28000 0x1000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port1 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+				 <&softreset STIH407_SATA1_SOFTRESET>,
+				 <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn",
+				      "sw-rst",
+				      "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 402844c..0a754f2 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -104,6 +104,7 @@
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
 				st,bank-name = "PIO5";
+				st,retime-pin-mask = <0x3f>;
 			};
 
 			rc {
@@ -519,6 +520,7 @@
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
 				st,bank-name = "PIO35";
+				st,retime-pin-mask = <0x7f>;
 			};
 
 			i2c4 {
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 2f61a99..16f02c5 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -26,4 +26,14 @@
 	aliases {
 		ttyAS0 = &sbc_serial0;
 	};
+
+	soc {
+
+		mmc0: sdhci@09060000 {
+			max-frequency = <200000000>;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			sd-uhs-ddr50;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 926235c..a2fdada 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -74,5 +74,17 @@
 			st,i2c-min-scl-pulse-width-us = <0>;
 			st,i2c-min-sda-pulse-width-us = <5>;
 		};
+
+		mmc1: sdhci@09080000 {
+			status = "okay";
+		};
+
+		mmc0: sdhci@09060000 {
+			status = "okay";
+			max-frequency = <200000000>;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			sd-uhs-ddr50;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index c1d8590..64fa0b5 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -47,6 +47,14 @@
 			status = "okay";
 		};
 
+		mmc0: sdhci@09060000 {
+			status = "okay";
+		};
+
+		mmc1: sdhci@09080000 {
+			status = "okay";
+		};
+
 		/* SSC11 to HDMI */
 		hdmiddc: i2c@9541000 {
 			status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index b67e5be..8d220ba 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,101 +53,12 @@
 	model = "Mele A1000";
 	compatible = "mele,a1000", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		mdio@01c0b080 {
-			phy-supply = <&reg_emac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			emac_power_pin_a1000: emac_power_pin@0 {
-				allwinner,pins = "PH15";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_a1000: led_pins@0 {
-				allwinner,pins = "PH10", "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -181,12 +87,107 @@
 		enable-active-high;
 		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	emac_power_pin_a1000: emac_power_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	led_pins_a1000: led_pins@0 {
+		allwinner,pins = "PH10", "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 490b77c..c7b0ba0 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -55,94 +50,100 @@
 	model = "BA10 tvbox";
 	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			usb2_vbus_pin_a: usb2_vbus_pin@0 {
-				allwinner,pins = "PH12";
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	aliases {
+		serial0 = &uart0;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
 	};
 };
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	usb2_vbus_pin_a: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 58214f2..5878a0b 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -49,10 +44,19 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Chuwi V7 CW0825";
 	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci1 {
@@ -74,6 +78,32 @@
 	};
 };
 
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 4260c2b..17081108 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,102 +52,12 @@
 	model = "Cubietech Cubieboard";
 	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_cubieboard: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				reg = <0x34>;
-				interrupts = <0>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		spi0: spi@01c05000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -171,26 +76,96 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
-
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
 };
 
-#include "axp209.dtsi"
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard: led_pins@0 {
+		allwinner,pins = "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -215,3 +190,30 @@
 	regulator-max-microvolt = <3000000>;
 	regulator-name = "avcc";
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
new file mode 100644
index 0000000..570754d
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gemei G9 Tablet";
+	compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * TODO:
+ *   2x cameras via CSI
+ *   bma250 IRQs
+ *   AXP battery management
+ *   NAND
+ *   OTG
+ *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+
+		/*
+		 * TODO: interrupt pins:
+		 * int1 - PH00
+		 * int2 - PI10
+		 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+
+	status = "okay";
+
+	button@158 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+
+	button@1142 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1142856>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+
+&uart0  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index d3f73ea..6b944db 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,100 +53,12 @@
 	model = "Miniand Hackberry";
 	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy0>;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		mdio@01c0b080 {
-			phy-supply = <&reg_emac_3v3>;
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&hackberry_hogs>;
-
-			hackberry_hogs: hogs@0 {
-				allwinner,pins = "PH19";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
-					allwinner,pins = "PH12";
-					allwinner,function = "gpio_out";
-					allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-					allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	reg_emac_3v3: emac-3v3 {
@@ -162,14 +69,93 @@
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy0>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hackberry_hogs>;
+
+	hackberry_hogs: hogs@0 {
+		allwinner,pins = "PH19";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
-		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+	usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index c88382a..43f58fb 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,6 +48,14 @@
 / {
 	model = "Hyundai A7HD";
 	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci1 {
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index 4829143..6c927a8 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -61,66 +56,68 @@
 		serial0 = &uart0;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
+&ehci0 {
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
 	};
 };
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
new file mode 100644
index 0000000..483ddee
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Jesurun Q5";
+	compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_q5>;
+
+		green {
+			label = "q5:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
+		};
+
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_q5>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	emac_power_pin_q5: emac_power_pin@0 {
+		allwinner,pins = "PH19";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_q5: led_pins@0 {
+		allwinner,pins = "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 9ee86a7..0bc9501 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,6 +52,14 @@
 	model = "HAOYU Electronics Marsboard A10";
 	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -166,7 +169,8 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>;
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index eb5fd69..ebe2a04 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,79 +53,83 @@
 	model = "PineRiver Mini X-Plus";
 	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ir0_pins_a: ir0@0 {
-				/* The ir receiver is not always populated */
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	aliases {
+		serial0 = &uart0;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
 	};
 };
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&ir0_rx_pins_a {
+	/* The ir receiver is not always populated */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index e9a6886..3c7eebe 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,6 +48,14 @@
 / {
 	model = "MK802";
 	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
index 802eda4..c861fa7 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,6 +48,14 @@
 / {
 	model = "MK802ii";
 	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 75742f8..31b95fc 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -56,111 +51,12 @@
 	model = "Olimex A10-OLinuXino-LIME";
 	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
 
-	cpus {
-		cpu0: cpu@0 {
-			/*
-			 * The A10-Lime is known to be unstable
-			 * when running at 1008 MHz
-			 */
-			operating-points = <
-				/* kHz    uV */
-				912000  1350000
-				864000  1300000
-				624000  1250000
-				>;
-			cooling-max-level = <2>;
-		};
+	aliases {
+		serial0 = &uart0;
 	};
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -174,18 +70,120 @@
 			default-state = "on";
 		};
 	};
+};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * The A10-Lime is known to be unstable when running at 1008 MHz
+	 */
+	operating-points = <
+		/* kHz    uV */
+		912000  1350000
+		864000  1300000
+		624000  1250000
+		>;
+	cooling-max-level = <2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 9d1e548..52c1777 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,90 +53,12 @@
 	model = "LinkSprite pcDuino";
 	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		pinctrl@01c20800 {
-			led_pins_pcduino: led_pins@0 {
-				allwinner,pins = "PH15", "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			key_pins_pcduino: key_pins@0 {
-				allwinner,pins = "PH17", "PH18", "PH19";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -185,12 +102,96 @@
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_pcduino: led_pins@0 {
+		allwinner,pins = "PH15", "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	key_pins_pcduino: key_pins@0 {
+		allwinner,pins = "PH17", "PH18", "PH19";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index eebb785..73b6143 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -2,12 +2,43 @@
  * Copyright 2012 Stefan Roese
  * Stefan Roese <sr@denx.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
@@ -30,7 +61,8 @@
 		ranges;
 
 		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
 				 <&ahb_gates 44>;
@@ -38,7 +70,8 @@
 		};
 
 		framebuffer@1 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
 				 <&ahb_gates 44>, <&ahb_gates 46>;
@@ -74,11 +107,11 @@
 			clocks = <&cpu>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
-				/* kHz    uV */
+				/* kHz	  uV */
 				1008000 1400000
-				912000  1350000
-				864000  1300000
-				624000  1250000
+				912000	1350000
+				864000	1300000
+				624000	1250000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
@@ -398,11 +431,12 @@
 
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
-		        #reset-cells = <1>;
+			#reset-cells = <1>;
 			compatible = "allwinner,sun4i-a10-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+			clock-output-names = "usb_ohci0", "usb_ohci1",
+					     "usb_phy";
 		};
 
 		spi3_clk: clk@01c200d4 {
@@ -414,12 +448,46 @@
 		};
 	};
 
+	/*
+	 * Note we use the address where the mmio registers start, not where
+	 * the SRAM blocks start, this cannot be changed because that would be
+	 * a devicetree ABI change.
+	 */
 	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
+		sram@00000000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00000000 0x4000>;
+			allwinner,sram-name = "A1";
+		};
+
+		sram@00004000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00004000 0x4000>;
+			allwinner,sram-name = "A2";
+		};
+
+		sram@00008000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00008000 0x4000>;
+			allwinner,sram-name = "A3-A4";
+		};
+
+		sram@00010000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00010000 0x1000>;
+			allwinner,sram-name = "D";
+		};
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+		};
+
 		dma: dma-controller@01c02000 {
 			compatible = "allwinner,sun4i-a10-dma";
 			reg = <0x01c02000 0x1000>;
@@ -485,6 +553,8 @@
 				      "sample";
 			interrupts = <32>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -500,6 +570,8 @@
 				      "sample";
 			interrupts = <33>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -515,6 +587,8 @@
 				      "sample";
 			interrupts = <34>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
@@ -530,6 +604,8 @@
 				      "sample";
 			interrupts = <35>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		usbphy: phy@01c13400 {
@@ -706,7 +782,8 @@
 			};
 
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
 				allwinner,function = "mmc0";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -719,43 +796,85 @@
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
-			ir0_pins_a: ir0@0 {
-				allwinner,pins = "PB3","PB4";
+			ir0_rx_pins_a: ir0@0 {
+				allwinner,pins = "PB4";
 				allwinner,function = "ir0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_pins_a: ir1@0 {
-				allwinner,pins = "PB22","PB23";
+			ir0_tx_pins_a: ir0@1 {
+				allwinner,pins = "PB3";
+				allwinner,function = "ir0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_rx_pins_a: ir1@0 {
+				allwinner,pins = "PB23";
+				allwinner,function = "ir1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_tx_pins_a: ir1@1 {
+				allwinner,pins = "PB22";
 				allwinner,function = "ir1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi0_pins_a: spi0@0 {
-				allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+				allwinner,pins = "PI11", "PI12", "PI13";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_cs0_pins_a: spi0_cs0@0 {
+				allwinner,pins = "PI10";
 				allwinner,function = "spi0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi1_pins_a: spi1@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,pins = "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_cs0_pins_a: spi1_cs0@0 {
+				allwinner,pins = "PI16";
 				allwinner,function = "spi1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_a: spi2@0 {
-				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,pins = "PC20", "PC21", "PC22";
 				allwinner,function = "spi2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_b: spi2@1 {
-				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,pins = "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_a: spi2_cs0@0 {
+				allwinner,pins = "PC19";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_b: spi2_cs0@1 {
+				allwinner,pins = "PB14";
 				allwinner,function = "spi2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
new file mode 100644
index 0000000..2b3511e
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Auxtek t004 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t004>;
+
+		red {
+			label = "t004-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+
+	reg_vmmc1: vmmc1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
+		regulator-name = "vmmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vmmc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-sdio-irq;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
+		allwinner,pins = "PB18";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_t004: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	allwinner,pins = "PG13";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
index b21af87..46ff940 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -54,6 +49,14 @@
 	model = "MK802-A10s";
 	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 2bbc93b..556b202 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -65,167 +60,8 @@
 		serial2 = &uart3;
 	};
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc1: mmc@01c10000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-				allwinner,pins = "PG1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-				allwinner,pins = "PG13";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PE3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-				allwinner,pins = "PB10";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		lradc: lradc@01c22800 {
-			vref-supply = <&reg_vcc3v0>;
-			status = "okay";
-
-			button@191 {
-				label = "Volume Up";
-				linux,code = <KEY_VOLUMEUP>;
-				channel = <0>;
-				voltage = <191274>;
-			};
-
-			button@392 {
-				label = "Volume Down";
-				linux,code = <KEY_VOLUMEDOWN>;
-				channel = <0>;
-				voltage = <392644>;
-			};
-
-			button@601 {
-				label = "Menu";
-				linux,code = <KEY_MENU>;
-				channel = <0>;
-				voltage = <601151>;
-			};
-
-			button@795 {
-				label = "Enter";
-				linux,code = <KEY_ENTER>;
-				channel = <0>;
-				voltage = <795090>;
-			};
-
-			button@987 {
-				label = "Home";
-				linux,code = <KEY_HOMEPAGE>;
-				channel = <0>;
-				voltage = <987387>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart2: serial@01c28800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart2_pins_a>;
-			status = "okay";
-		};
-
-		uart3: serial@01c28c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart3_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-
-			at24@50 {
-				compatible = "at,24c16";
-				pagesize = <16>;
-				reg = <0x50>;
-				read-only;
-			};
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -239,10 +75,172 @@
 			default-state = "on";
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
-		gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	at24@50 {
+		compatible = "at,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+		read-only;
 	};
 };
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button@795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PE3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
index 7deddfc..3b05798 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -56,67 +51,12 @@
 	model = "R7 A10s hdmi tv-stick";
 	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		mmc1: mmc@01c10000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc1_pins_a>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-				allwinner,pins = "PG1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_r7: led_pins@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-				allwinner,pins = "PG13";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -130,10 +70,71 @@
 			default-state = "on";
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_r7>;
-		gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	led_pins_r7: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_r7>;
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 2fd8988..934ecfd 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -3,16 +3,49 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
 
+#include "sun5i.dtsi"
+
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -29,7 +62,8 @@
 		ranges;
 
 		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
 				 <&ahb_gates 44>;
@@ -45,133 +79,23 @@
 		};
 	};
 
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
 		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
-			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
-				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
-				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
-				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
-				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
+			clock-output-names = "ahb_usbotg", "ahb_ehci",
+					     "ahb_ohci", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_nand",
+					     "ahb_sdram", "ahb_emac", "ahb_ts",
+					     "ahb_spi0", "ahb_spi1", "ahb_spi2",
+					     "ahb_gps", "ahb_stimer", "ahb_ve",
+					     "ahb_tve", "ahb_lcd", "ahb_csi",
+					     "ahb_hdmi", "ahb_de_be",
+					     "ahb_de_fe", "ahb_iep",
+					     "ahb_mali400";
 		};
 
 		apb0_gates: clk@01c20068 {
@@ -179,16 +103,9 @@
 			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
-				"apb0_ir", "apb0_keypad";
-		};
-
-		apb1: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1";
+			clock-output-names = "apb0_codec", "apb0_iis",
+					     "apb0_pio", "apb0_ir",
+					     "apb0_keypad";
 		};
 
 		apb1_gates: clk@01c2006c {
@@ -200,161 +117,9 @@
 				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
 				"apb1_uart2", "apb1_uart3";
 		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_phy";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun5i-a13-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
 	};
 
 	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dma: dma-controller@01c02000 {
-			compatible = "allwinner,sun4i-a10-dma";
-			reg = <0x01c02000 0x1000>;
-			interrupts = <27>;
-			clocks = <&ahb_gates 6>;
-			#dma-cells = <2>;
-		};
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
-			       <&dma SUN4I_DMA_DEDICATED 26>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
-			       <&dma SUN4I_DMA_DEDICATED 8>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
@@ -371,214 +136,6 @@
 			#size-cells = <0>;
 		};
 
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <33>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 0>, <&usb_clk 1>;
-			reset-names = "usb0_reset", "usb1_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <40>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
-			       <&dma SUN4I_DMA_DEDICATED 28>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun5i-a10s-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB19", "PB20";
-				allwinner,function = "uart0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart2_pins_a: uart2@0 {
-				allwinner,pins = "PC18", "PC19";
-				allwinner,function = "uart2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart3_pins_a: uart3@0 {
-				allwinner,pins = "PG9", "PG10";
-				allwinner,function = "uart3";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB15", "PB16";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB17", "PB18";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc1_pins_a: mmc1@0 {
-				allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
-				allwinner,function = "mmc1";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		lradc: lradc@01c22800 {
-			compatible = "allwinner,sun4i-a10-lradc-keys";
-			reg = <0x01c22800 0x100>;
-			interrupts = <31>;
-			status = "disabled";
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-			#thermal-sensor-cells = <0>;
-		};
-
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -589,16 +146,6 @@
 			status = "disabled";
 		};
 
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
@@ -608,52 +155,49 @@
 			clocks = <&apb1_gates 18>;
 			status = "disabled";
 		};
+	};
+};
 
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
+&pio {
+	compatible = "allwinner,sun5i-a10s-pinctrl";
 
-		i2c0: i2c@01c2ac00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			status = "disabled";
-		};
+	uart0_pins_a: uart0@0 {
+		allwinner,pins = "PB19", "PB20";
+		allwinner,function = "uart0";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-		i2c1: i2c@01c2b000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			status = "disabled";
-		};
+	uart2_pins_a: uart2@0 {
+		allwinner,pins = "PC18", "PC19";
+		allwinner,function = "uart2";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-		i2c2: i2c@01c2b400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			status = "disabled";
-		};
+	uart3_pins_a: uart3@0 {
+		allwinner,pins = "PG9", "PG10";
+		allwinner,function = "uart3";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-		timer@01c60000 {
-			compatible = "allwinner,sun5i-a13-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <82>, <83>;
-			clocks = <&ahb_gates 28>;
-		};
+	emac_pins_a: emac0@0 {
+		allwinner,pins = "PA0", "PA1", "PA2",
+				"PA3", "PA4", "PA5", "PA6",
+				"PA7", "PA8", "PA9", "PA10",
+				"PA11", "PA12", "PA13", "PA14",
+				"PA15", "PA16";
+		allwinner,function = "emac";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc1_pins_a: mmc1@0 {
+		allwinner,pins = "PG3", "PG4", "PG5",
+				 "PG6", "PG7", "PG8";
+		allwinner,function = "mmc1";
+		allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 03aa045..990f9d6 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -60,81 +55,72 @@
 		serial0 = &uart1;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_ldo3>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_h702: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				reg = <0x34>;
-				interrupts = <0>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-
-			pcf8563: rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 };
 
-#include "axp209.dtsi"
-
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+#include "axp209.dtsi"
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -165,3 +151,14 @@
 	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-wifi";
 };
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index 03deb84..ad84fe4 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -61,76 +56,8 @@
 		serial0 = &uart1;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_olinuxinom: led_pins@0 {
-				allwinner,pins = "PG9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
-				allwinner,pins = "PG11";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -144,10 +71,80 @@
 			default-state = "on";
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
-		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	led_pins_olinuxinom: led_pins@0 {
+		allwinner,pins = "PG9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
+		allwinner,pins = "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 6b24876..4232400 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -63,125 +58,8 @@
 		serial0 = &uart1;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PG9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
-				allwinner,pins = "PG11";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		lradc: lradc@01c22800 {
-			vref-supply = <&reg_vcc3v0>;
-			status = "okay";
-
-			button@191 {
-				label = "Volume Up";
-				linux,code = <KEY_VOLUMEUP>;
-				channel = <0>;
-				voltage = <191274>;
-			};
-
-			button@392 {
-				label = "Volume Down";
-				linux,code = <KEY_VOLUMEDOWN>;
-				channel = <0>;
-				voltage = <392644>;
-			};
-
-			button@601 {
-				label = "Menu";
-				linux,code = <KEY_MENU>;
-				channel = <0>;
-				voltage = <601151>;
-			};
-
-			button@795 {
-				label = "Enter";
-				linux,code = <KEY_ENTER>;
-				channel = <0>;
-				voltage = <795090>;
-			};
-
-			button@987 {
-				label = "Home";
-				linux,code = <KEY_HOMEPAGE>;
-				channel = <0>;
-				voltage = <987387>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -194,10 +72,129 @@
 			default-state = "on";
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
-		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
 	};
 };
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button@795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PG9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
+		allwinner,pins = "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
new file mode 100644
index 0000000..514f159
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Utoo P66";
+	compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+	i2c_lcd: i2c@0 {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_lcd_pins>;
+		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
+			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	icn8318: touchscreen@40 {
+		compatible = "chipone,icn8318";
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_wake_pin_p66>;
+		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&pio {
+	mmc0_cd_pin_p66: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	i2c_lcd_pins: i2c_lcd_pin@0 {
+		allwinner,pins = "PG10", "PG12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	ts_wake_pin_p66: ts_wake_pin@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 883cb4873..976d4fa 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -3,20 +3,51 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
 
-#include <dt-bindings/thermal/thermal.h>
+#include "sun5i.dtsi"
 
-#include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -35,31 +66,6 @@
 		};
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-			clocks = <&cpu>;
-			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
-				/* kHz    uV */
-				1008000 1400000
-				912000  1350000
-				864000  1300000
-				624000  1200000
-				576000  1200000
-				432000  1200000
-				>;
-			#cooling-cells = <2>;
-			cooling-min-level = <0>;
-			cooling-max-level = <5>;
-		};
-	};
-
 	thermal-zones {
 		cpu_thermal {
 			/* milliseconds */
@@ -92,126 +98,22 @@
 		};
 	};
 
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
 		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
-			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
-				"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
-				"ahb_de_fe", "ahb_iep", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
+			clock-output-names = "ahb_usbotg", "ahb_ehci",
+					     "ahb_ohci", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_nand",
+					     "ahb_sdram", "ahb_spi0",
+					     "ahb_spi1", "ahb_spi2",
+					     "ahb_stimer", "ahb_ve", "ahb_lcd",
+					     "ahb_csi", "ahb_de_be",
+					     "ahb_de_fe", "ahb_iep",
+					     "ahb_mali400";
 		};
 
 		apb0_gates: clk@01c20068 {
@@ -219,15 +121,8 @@
 			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
-		};
-
-		apb1: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1";
+			clock-output-names = "apb0_codec", "apb0_pio",
+					     "apb0_ir";
 		};
 
 		apb1_gates: clk@01c2006c {
@@ -238,384 +133,39 @@
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
 				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
 		};
+	};
+};
 
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
+&cpu0 {
+	clock-latency = <244144>; /* 8 32k periods */
+	operating-points = <
+		/* kHz	  uV */
+		1008000 1400000
+		912000	1350000
+		864000	1300000
+		624000	1200000
+		576000	1200000
+		432000	1200000
+		>;
+	#cooling-cells = <2>;
+	cooling-min-level = <0>;
+	cooling-max-level = <5>;
+};
 
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
+&pio {
+	compatible = "allwinner,sun5i-a13-pinctrl";
 
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_phy";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun5i-a13-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
+	uart1_pins_a: uart1@0 {
+		allwinner,pins = "PE10", "PE11";
+		allwinner,function = "uart1";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dma: dma-controller@01c02000 {
-			compatible = "allwinner,sun4i-a10-dma";
-			reg = <0x01c02000 0x1000>;
-			interrupts = <27>;
-			clocks = <&ahb_gates 6>;
-			#dma-cells = <2>;
-		};
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
-			       <&dma SUN4I_DMA_DEDICATED 26>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
-			       <&dma SUN4I_DMA_DEDICATED 8>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 0>, <&usb_clk 1>;
-			reset-names = "usb0_reset", "usb1_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <40>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
-			       <&dma SUN4I_DMA_DEDICATED 28>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun5i-a13-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PE10", "PE11";
-				allwinner,function = "uart1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart1_pins_b: uart1@1 {
-				allwinner,pins = "PG3", "PG4";
-				allwinner,function = "uart1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB15", "PB16";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB17", "PB18";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		lradc: lradc@01c22800 {
-			compatible = "allwinner,sun4i-a10-lradc-keys";
-			reg = <0x01c22800 0x100>;
-			interrupts = <31>;
-			status = "disabled";
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		timer@01c60000 {
-			compatible = "allwinner,sun5i-a13-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <82>, <83>;
-			clocks = <&ahb_gates 28>;
-		};
+	uart1_pins_b: uart1@1 {
+		allwinner,pins = "PG3", "PG4";
+		allwinner,function = "uart1";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
new file mode 100644
index 0000000..5f66243
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -0,0 +1,613 @@
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>, <&cpu>, <&pll6 1>;
+			clock-output-names = "ahb";
+			/*
+			 * Use PLL6 as parent, instead of CPU/AXI
+			 * which has rate changes due to cpufreq
+			 */
+			assigned-clocks = <&ahb>;
+			assigned-clock-parents = <&pll6 1>;
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "axi_dram";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	/*
+	 * Note we use the address where the mmio registers start, not where
+	 * the SRAM blocks start, this cannot be changed because that would be
+	 * a devicetree ABI change.
+	 */
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram@00000000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00000000 0x4000>;
+			allwinner,sram-name = "A1";
+		};
+
+		sram@00004000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00004000 0x4000>;
+			allwinner,sram-name = "A2";
+		};
+
+		sram@00008000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00008000 0x4000>;
+			allwinner,sram-name = "A3-A4";
+		};
+
+		sram@00010000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00010000 0x1000>;
+			allwinner,sram-name = "D";
+		};
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+					"PC10", "PC11", "PC12", "PC13",
+					"PC14", "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ahb_gates 28>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
index be9f5ee..2f8cfab 100644
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,39 +53,41 @@
 	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
 	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	soc@01c00000 {
-		pio: pinctrl@01c20800 {
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH27";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+&pio {
+	usb1_vbus_pin_a: usb1_vbus_pin@0 {
+		allwinner,pins = "PH27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_a>;
+	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 84630e5..0cf9926 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,79 +53,81 @@
 	model = "WITS A31 Colombus Evaluation Board";
 	compatible = "wits,colombus", "allwinner,sun6i-a31";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "fail";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+	mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c19400 {
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1b000 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
-				allwinner,pins = "PA8";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "fail";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_pin_colombus>;
-		gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
+&reg_usb2_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_vbus_pin_colombus>;
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 8b61b1b..d0cfada 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,8 +53,17 @@
 	model = "Merrii A31 Hummingbird";
 	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
 };
 
@@ -106,10 +110,16 @@
 	};
 };
 
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&vcc_3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
 	cd-inverted;
@@ -121,6 +131,16 @@
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
+	vmmc-supply = <&vcc_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -132,6 +152,80 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
+		allwinner,pins = "PG10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp221: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		dcdc1-supply = <&vcc_3v0>;
+		dcdc5-supply = <&vcc_dram>;
+
+		regulators {
+			x-powers,dcdc-freq = <3000>;
+
+			vcc_3v0: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v0";
+			};
+
+			vdd_cpu: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1320000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			vdd_gpu: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1320000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			vdd_sys_dll: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-dll";
+			};
+
+			vcc_dram: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc-dram";
+			};
+
+			vcc_wifi: aldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_wifi";
+			};
+
+			avcc: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+		};
+	};
 };
 
 &reg_usb1_vbus {
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
new file mode 100644
index 0000000..e9185da
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele I7 Quad top set box";
+	compatible = "mele,i7", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_i7>;
+
+		blue {
+			label = "i7:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	led_pins_i7: led_pins@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_i7: mmc0_cd_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_i7: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_i7>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 139a21e..a5660d6 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -56,80 +51,12 @@
 	model = "Mele M9 / A1000G Quad top set box";
 	compatible = "mele,m9", "allwinner,sun6i-a31";
 
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+	aliases {
+		serial0 = &uart0;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1b000 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			led_pins_m9: led_pins@0 {
-				allwinner,pins = "PH13";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-				allwinner,pins = "PH22";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-				allwinner,pins = "PC27";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c30000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		ir@01f02000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -142,11 +69,81 @@
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb1_vbus_pin_m9>;
-		gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
 };
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	led_pins_m9: led_pins@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_m9>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index fa2f403..008047a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -50,6 +45,7 @@
 #include "skeleton.dtsi"
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -66,7 +62,8 @@
 		ranges;
 
 		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll6 0>;
 			status = "disabled";
@@ -96,10 +93,22 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <3>;
 		};
 
 		cpu@1 {
@@ -121,6 +130,38 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
@@ -196,6 +237,14 @@
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
 			clock-output-names = "ahb1";
+
+			/*
+			 * Clock AHB1 from PLL6, instead of CPU/AXI which
+			 * has rate changes due to cpufreq. Also the DMA
+			 * controller requires AHB1 clocked from PLL6.
+			 */
+			assigned-clocks = <&ahb1>;
+			assigned-clock-parents = <&pll6 0>;
 		};
 
 		ahb1_gates: clk@01c20060 {
@@ -251,9 +300,10 @@
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb2>;
 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2", "apb2_uart3",
-					"apb2_uart4", "apb2_uart5";
+					     "apb2_i2c2", "apb2_i2c3",
+					     "apb2_uart0", "apb2_uart1",
+					     "apb2_uart2", "apb2_uart3",
+					     "apb2_uart4", "apb2_uart5";
 		};
 
 		mmc0_clk: clk@01c20088 {
@@ -330,7 +380,7 @@
 
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
-		        #reset-cells = <1>;
+			#reset-cells = <1>;
 			compatible = "allwinner,sun6i-a31-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&osc24M>;
@@ -340,10 +390,13 @@
 		};
 
 		/*
-		 * The following two are dummy clocks, placeholders used in the gmac_tx
-		 * clock. The gmac driver will choose one parent depending on the PHY
-		 * interface mode, using clk_set_rate auto-reparenting.
-		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
 		 */
 		mii_phy_tx_clk: clk@1 {
 			#clock-cells = <0>;
@@ -381,10 +434,6 @@
 			clocks = <&ahb1_gates 6>;
 			resets = <&ahb1_rst 6>;
 			#dma-cells = <1>;
-
-			/* DMA controller requires AHB1 clocked from PLL6 */
-			assigned-clocks = <&ahb1>;
-			assigned-clock-parents = <&pll6 0>;
 		};
 
 		mmc0: mmc@01c0f000 {
@@ -402,6 +451,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -419,6 +470,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -436,6 +489,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
@@ -453,6 +508,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		usbphy: phy@01c19400 {
@@ -575,12 +632,21 @@
 			};
 
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
 				allwinner,function = "mmc0";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			gmac_pins_mii_a: gmac_mii@0 {
 				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
 						"PA8", "PA9", "PA11",
@@ -805,7 +871,8 @@
 		};
 
 		timer@01c60000 {
-			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+			compatible = "allwinner,sun6i-a31-hstimer",
+				     "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
@@ -896,7 +963,8 @@
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+				clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
+					 <&pll6 0>;
 				clock-output-names = "ar100";
 			};
 
@@ -973,6 +1041,27 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			p2wi_pins: p2wi {
+				allwinner,pins = "PL0", "PL1";
+				allwinner,function = "s_p2wi";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		p2wi: i2c@01f03400 {
+			compatible = "allwinner,sun6i-a31-p2wi";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <100000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&p2wi_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index bc3734f..1e2411a 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,10 +48,14 @@
 / {
 	model = "CSQ CS908 top set box";
 	compatible = "csq,cs908", "allwinner,sun6i-a31s";
-};
 
-&usbphy {
-	status = "okay";
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci0 {
@@ -67,25 +66,6 @@
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
-};
-
-&pio {
-	usb1_vbus_pin_csq908: usb1_vbus_pin@0 {
-		allwinner,pins = "PC27";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_pins_mii_a>;
@@ -102,3 +82,17 @@
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi
index eaf5ec8..c17a327 100644
--- a/arch/arm/boot/dts/sun6i-a31s.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31s.dtsi
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 5dd139e..9f7b472 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -65,130 +60,8 @@
 		serial2 = &uart7;
 	};
 
-	soc@01c00000 {
-		spi0: spi@01c05000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_pins_a>;
-			status = "okay";
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-				allwinner,pins = "PH10";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			gmac_power_pin_bananapi: gmac_power_pin@0 {
-				allwinner,pins = "PH23";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_bananapi: led_pins@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart3: serial@01c28c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart3_pins_b>;
-			status = "okay";
-		};
-
-		uart7: serial@01c29c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart7_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			phy-supply = <&reg_gmac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -202,14 +75,6 @@
 		};
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -222,3 +87,137 @@
 		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	gmac_power_pin_bananapi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bananapi: led_pins@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>,
+		    <&spi0_cs1_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index fb89fe7..45e2a02 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -55,6 +50,16 @@
 	model = "LeMaker Banana Pro";
 	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -144,7 +149,7 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins_a>;
 	status = "okay";
 };
 
@@ -233,7 +238,9 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>;
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>,
+		    <&spi0_cs1_pins_a>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index c4ab6ed..39a51d5 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -59,94 +54,12 @@
 	model = "Cubietech Cubieboard2";
 	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_cubieboard2: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -164,26 +77,94 @@
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
 };
 
-#include "axp209.dtsi"
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard2: led_pins@0 {
+		allwinner,pins = "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -208,3 +189,23 @@
 	regulator-max-microvolt = <3000000>;
 	regulator-name = "avcc";
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 8f74a64..4611e2f 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -59,142 +54,12 @@
 	model = "Cubietech Cubietruck";
 	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_vmmc3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb0_vbus-supply = <&reg_usb0_vbus>;
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_pins_a: mmc3@0 {
-				/* AP6210 requires pull-up */
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			vmmc3_pin_cubietruck: vmmc3_pin@0 {
-				allwinner,pins = "PH9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-				allwinner,pins = "PH12";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_cubietruck: led_pins@0 {
-				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb0_vbus_pin_a: usb0_vbus_pin@0 {
-				allwinner,pins = "PH17";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		pwm: pwm@01c20e00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
-			status = "okay";
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -223,26 +88,6 @@
 		};
 	};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
-		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_usb0_vbus: usb0-vbus {
-		pinctrl-0 = <&usb0_vbus_pin_a>;
-		gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
 	reg_vmmc3: vmmc3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -255,12 +100,149 @@
 	};
 };
 
-#include "axp209.dtsi"
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc3_pins_a {
+	/* AP6210 requires pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vmmc3_pin_cubietruck: vmmc3_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_cubietruck: led_pins@0 {
+		allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PH17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -285,3 +267,30 @@
 	regulator-max-microvolt = <3000000>;
 	regulator-name = "avcc";
 };
+
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_a>;
+	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index 86a944c..37f4a54 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -3,12 +3,43 @@
  *
  * Wills Wang <wills.wang.open@gmail.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -31,197 +62,8 @@
 		serial4 = &uart5;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_mmc3_vdd>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
-				allwinner,pins = "PH15";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
-				allwinner,pins = "PH9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
-				allwinner,pins = "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		pwm: pwm@01c20e00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwm0_pins_a>;
-			status = "okay";
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart2: serial@01c28800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart2_pins_a>;
-			status = "okay";
-		};
-
-		uart3: serial@01c28c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart3_pins_a>;
-			status = "okay";
-		};
-
-		uart4: serial@01c29000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart4_pins_a>;
-			status = "okay";
-		};
-
-		uart5: serial@01c29400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart5_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		i2c3: i2c@01c2b800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_pins_a>;
-			status = "okay";
-		};
-
-		spi2: spi@01c17000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_pins_b>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			phy-supply = <&reg_gmac_vdd>;
-			/* phy reset config */
-			snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
-			snps,reset-active-low;
-			/* wait 1s after reset, otherwise fail to read phy id */
-			snps,reset-delays-us = <0 10000 1000000>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
-		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
-		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	reg_mmc3_vdd: mmc3_vdd {
@@ -246,3 +88,195 @@
 		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
 	};
 };
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_vdd>;
+	/* phy reset config */
+	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+	snps,reset-active-low;
+	/* wait 1s after reset, otherwise fail to read phy id */
+	snps,reset-delays-us = <0 10000 1000000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_mmc3_vdd>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
+		allwinner,pins = "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
+	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_b>,
+		    <&spi2_cs0_pins_b>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index 06148b4..f32f6f2 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,123 +52,12 @@
 	model = "I12 / Q5 / QT840A A20 tvbox";
 	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_vmmc3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_pins_a: mmc3@0 {
-				/* AP6210 / AP6330 requires pull-up */
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
-				allwinner,pins = "PH12";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
-				allwinner,pins = "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_i12_tvbox: led_pins@0 {
-				allwinner,pins = "PH9", "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			phy-supply = <&reg_gmac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -192,14 +76,6 @@
 		};
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
 	reg_vmmc3: vmmc3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -236,3 +112,136 @@
 		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc3_pins_a {
+	/* AP6210 / AP6330 requires pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
+		allwinner,pins = "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_i12_tvbox: led_pins@0 {
+		allwinner,pins = "PH9", "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
index 5add9f2..8d9ea48 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -59,96 +54,12 @@
 	model = "Mele M3";
 	compatible = "mele,m3", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		mmc2: mmc@01c11000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc2_pins_a>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_m3: led_pins@0 {
-				allwinner,pins = "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -161,12 +72,102 @@
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
+&ehci0 {
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
 };
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_m3: led_pins@0 {
+		allwinner,pins = "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
new file mode 100644
index 0000000..4f432f8
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2015 Marcus Cooper
+ *
+ * Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "mk808c";
+	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 12ded69..769726d 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -19,11 +19,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -60,93 +55,12 @@
 	model = "Olimex A20-OLinuXino-LIME";
 	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -160,18 +74,105 @@
 			default-state = "on";
 		};
 	};
+};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 260dbd3..8acff78 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,143 +52,12 @@
 	model = "Olimex A20-OLinuXino-LIME2";
 	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-
-				acin-supply = <&reg_axp_ipsout>;
-				vin2-supply = <&reg_axp_ipsout>;
-				vin3-supply = <&reg_axp_ipsout>;
-				ldo24in-supply = <&reg_axp_ipsout>;
-				ldo3in-supply = <&reg_axp_ipsout>;
-
-				regulators {
-					vdd_rtc: ldo1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-					};
-
-					avcc: ldo2 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					vcc_csi0: ldo3 {
-						regulator-min-microvolt = <700000>;
-						regulator-max-microvolt = <3500000>;
-						regulator-always-on;
-					};
-
-					vcc_csi1: ldo4 {
-						regulator-min-microvolt = <1250000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					vdd_cpu: dcdc2 {
-						regulator-min-microvolt = <700000>;
-						regulator-max-microvolt = <2275000>;
-						regulator-always-on;
-					};
-
-					vdd_int: dcdc3 {
-						regulator-min-microvolt = <700000>;
-						regulator-max-microvolt = <3500000>;
-						regulator-always-on;
-					};
-				};
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -208,20 +72,6 @@
 		};
 	};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
 	reg_axp_ipsout: axp_ipsout {
 		compatible = "regulator-fixed";
 		regulator-name = "axp-ipsout";
@@ -230,3 +80,154 @@
 		regulator-always-on;
 	};
 };
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		acin-supply = <&reg_axp_ipsout>;
+		vin2-supply = <&reg_axp_ipsout>;
+		vin3-supply = <&reg_axp_ipsout>;
+		ldo24in-supply = <&reg_axp_ipsout>;
+		ldo3in-supply = <&reg_axp_ipsout>;
+
+		regulators {
+			vdd_rtc: ldo1 {
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+			};
+
+			avcc: ldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_csi0: ldo3 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			vcc_csi1: ldo4 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_cpu: dcdc2 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-always-on;
+			};
+
+			vdd_int: dcdc3 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 714e15a..00f8f25 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -3,12 +3,43 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -32,193 +63,8 @@
 		spi1 = &spi2;
 	};
 
-	soc@01c00000 {
-		spi1: spi@01c06000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins_a>;
-			status = "okay";
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		spi2: spi@01c17000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_pins_a>;
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
-				allwinner,pins = "PH11";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		lradc: lradc@01c22800 {
-			vref-supply = <&reg_vcc3v0>;
-			status = "okay";
-
-			button@191 {
-				label = "Volume Up";
-				linux,code = <KEY_VOLUMEUP>;
-				channel = <0>;
-				voltage = <191274>;
-			};
-
-			button@392 {
-				label = "Volume Down";
-				linux,code = <KEY_VOLUMEDOWN>;
-				channel = <0>;
-				voltage = <392644>;
-			};
-
-			button@601 {
-				label = "Menu";
-				linux,code = <KEY_MENU>;
-				channel = <0>;
-				voltage = <601151>;
-			};
-
-			button@795 {
-				label = "Search";
-				linux,code = <KEY_SEARCH>;
-				channel = <0>;
-				voltage = <795090>;
-			};
-
-			button@987 {
-				label = "Home";
-				linux,code = <KEY_HOMEPAGE>;
-				channel = <0>;
-				voltage = <987387>;
-			};
-
-			button@1184 {
-				label = "Esc";
-				linux,code = <KEY_ESC>;
-				channel = <0>;
-				voltage = <1184678>;
-			};
-
-			button@1398 {
-				label = "Enter";
-				linux,code = <KEY_ENTER>;
-				channel = <0>;
-				voltage = <1398804>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart6: serial@01c29800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart6_pins_a>;
-			status = "okay";
-		};
-
-		uart7: serial@01c29c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart7_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -232,16 +78,205 @@
 			default-state = "on";
 		};
 	};
+};
 
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
 	};
+
+	button@795 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+
+	button@1184 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1184678>;
+	};
+
+	button@1398 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1398804>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>,
+		    <&spi1_cs0_pins_a>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>,
+		    <&spi2_cs0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
new file mode 100644
index 0000000..73cd81ee
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -0,0 +1,250 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Orange Pi Mini";
+	compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_orangepi>;
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+
+		blue {
+			label = "orangepi:blue:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_orangepi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_orangepi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_orangepi: led_pins@0 {
+		allwinner,pins = "PH24", "PH25";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH26";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
new file mode 100644
index 0000000..55a06ce
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Orange Pi";
+	compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_orangepi>;
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_orangepi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_orangepi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_orangepi: led_pins@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH26";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
new file mode 100644
index 0000000..5361fce
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2015 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LinkSprite pcDuino3 Nano";
+	compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino3_nano>;
+
+		/* Marked "LED3" on the PCB. */
+		usr1 {
+			label = "pcduino3-nano:green:usr1";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+
+		/* Marked "LED4" on the PCB. */
+		usr2 {
+			label = "pcduino3-nano:green:usr2";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_pcduino3_nano: led_pins@0 {
+		allwinner,pins = "PH16", "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+	gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 0a2c2ae..afc9ece 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -59,103 +54,12 @@
 	model = "LinkSprite pcDuino3";
 	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-				allwinner,pins = "PH2";
-			};
-
-			led_pins_pcduino3: led_pins@0 {
-				allwinner,pins = "PH15", "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			key_pins_pcduino3: key_pins@0 {
-				allwinner,pins = "PH17", "PH18", "PH19";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -196,17 +100,114 @@
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ahci_pwr_pin_a {
+	allwinner,pins = "PH2";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_pcduino3: led_pins@0 {
+		allwinner,pins = "PH15", "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	key_pins_pcduino3: key_pins@0 {
+		allwinner,pins = "PH17", "PH18", "PH19";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	reg_ahci_5v: ahci-5v {
-		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
new file mode 100644
index 0000000..83c6d3f
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wexler TAB7200";
+	compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button@761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index fdd1817..e04cdf9 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -68,7 +63,8 @@
 		ranges;
 
 		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
 				 <&ahb_gates 44>;
@@ -104,14 +100,14 @@
 			clocks = <&cpu>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
-				/* kHz    uV */
-				960000  1400000
-				912000  1400000
-				864000  1300000
-				720000  1200000
-				528000  1100000
-				312000  1000000
-				144000  900000
+				/* kHz	  uV */
+				960000	1400000
+				912000	1400000
+				864000	1300000
+				720000	1200000
+				528000	1100000
+				312000	1000000
+				144000	900000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
@@ -224,7 +220,8 @@
 			compatible = "allwinner,sun4i-a10-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+			clock-output-names = "pll6_sata", "pll6_other", "pll6",
+					     "pll6_div_4";
 		};
 
 		pll8: clk@01c20040 {
@@ -253,10 +250,16 @@
 
 		ahb: ahb@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
+			compatible = "allwinner,sun5i-a13-ahb-clk";
 			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
+			clocks = <&axi>, <&pll6 3>, <&pll6 1>;
 			clock-output-names = "ahb";
+			/*
+			 * Use PLL6 as parent, instead of CPU/AXI
+			 * which has rate changes due to cpufreq
+			 */
+			assigned-clocks = <&ahb>;
+			assigned-clock-parents = <&pll6 3>;
 		};
 
 		ahb_gates: clk@01c20060 {
@@ -441,11 +444,12 @@
 
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
-		        #reset-cells = <1>;
+			#reset-cells = <1>;
 			compatible = "allwinner,sun4i-a10-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+			clock-output-names = "usb_ohci0", "usb_ohci1",
+					     "usb_phy";
 		};
 
 		spi3_clk: clk@01c200d4 {
@@ -465,10 +469,13 @@
 		};
 
 		/*
-		 * The following two are dummy clocks, placeholders used in the gmac_tx
-		 * clock. The gmac driver will choose one parent depending on the PHY
-		 * interface mode, using clk_set_rate auto-reparenting.
-		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
 		 */
 		mii_phy_tx_clk: clk@2 {
 			#clock-cells = <0>;
@@ -521,12 +528,46 @@
 		};
 	};
 
+	/*
+	 * Note we use the address where the mmio registers start, not where
+	 * the SRAM blocks start, this cannot be changed because that would be
+	 * a devicetree ABI change.
+	 */
 	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
+		sram@00000000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00000000 0x4000>;
+			allwinner,sram-name = "A1";
+		};
+
+		sram@00004000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00004000 0x4000>;
+			allwinner,sram-name = "A2";
+		};
+
+		sram@00008000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00008000 0x4000>;
+			allwinner,sram-name = "A3-A4";
+		};
+
+		sram@00010000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00010000 0x1000>;
+			allwinner,sram-name = "D";
+		};
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+		};
+
 		nmi_intc: interrupt-controller@01c00030 {
 			compatible = "allwinner,sun7i-a20-sc-nmi";
 			interrupt-controller;
@@ -600,6 +641,8 @@
 				      "sample";
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -615,6 +658,8 @@
 				      "sample";
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -630,6 +675,8 @@
 				      "sample";
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
@@ -645,6 +692,8 @@
 				      "sample";
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		usbphy: phy@01c13400 {
@@ -896,35 +945,71 @@
 			};
 
 			spi0_pins_a: spi0@0 {
-				allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+				allwinner,pins = "PI11", "PI12", "PI13";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_cs0_pins_a: spi0_cs0@0 {
+				allwinner,pins = "PI10";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_cs1_pins_a: spi0_cs1@0 {
+				allwinner,pins = "PI14";
 				allwinner,function = "spi0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi1_pins_a: spi1@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,pins = "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_cs0_pins_a: spi1_cs0@0 {
+				allwinner,pins = "PI16";
 				allwinner,function = "spi1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_a: spi2@0 {
-				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,pins = "PC20", "PC21", "PC22";
 				allwinner,function = "spi2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_b: spi2@1 {
-				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,pins = "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_a: spi2_cs0@0 {
+				allwinner,pins = "PC19";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_b: spi2_cs0@1 {
+				allwinner,pins = "PB14";
 				allwinner,function = "spi2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
 				allwinner,function = "mmc0";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -938,28 +1023,44 @@
 			};
 
 			mmc2_pins_a: mmc2@0 {
-				allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
+				allwinner,pins = "PC6", "PC7", "PC8",
+						 "PC9", "PC10", "PC11";
 				allwinner,function = "mmc2";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			mmc3_pins_a: mmc3@0 {
-				allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+				allwinner,pins = "PI4", "PI5", "PI6",
+						 "PI7", "PI8", "PI9";
 				allwinner,function = "mmc3";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir0_pins_a: ir0@0 {
-				    allwinner,pins = "PB3","PB4";
+			ir0_rx_pins_a: ir0@0 {
+				    allwinner,pins = "PB4";
 				    allwinner,function = "ir0";
 				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_pins_a: ir1@0 {
-				    allwinner,pins = "PB22","PB23";
+			ir0_tx_pins_a: ir0@1 {
+				    allwinner,pins = "PB3";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_rx_pins_a: ir1@0 {
+				    allwinner,pins = "PB23";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_tx_pins_a: ir1@1 {
+				    allwinner,pins = "PB22";
 				    allwinner,function = "ir1";
 				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -1042,7 +1143,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			#thermal-sensor-cells = <0>;
@@ -1129,7 +1230,8 @@
 		};
 
 		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 0>;
@@ -1139,7 +1241,8 @@
 		};
 
 		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 1>;
@@ -1149,7 +1252,8 @@
 		};
 
 		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 2>;
@@ -1159,7 +1263,8 @@
 		};
 
 		i2c3: i2c@01c2b800 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 3>;
@@ -1169,7 +1274,8 @@
 		};
 
 		i2c4: i2c@01c2c000 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2c000 0x400>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 15>;
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
index dd31c53..382d64c 100644
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
index 623573e..95134c6 100644
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -64,71 +59,69 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	/* pull-ups and devices require PMIC regulator */
+	status = "failed";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-				allwinner,pins = "PB4";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-		};
-
-		lradc: lradc@01c22800 {
-			vref-supply = <&reg_vcc3v0>;
-			status = "okay";
-
-			button@200 {
-				label = "Volume Up";
-				linux,code = <KEY_VOLUMEUP>;
-				channel = <0>;
-				voltage = <200000>;
-			};
-
-			button@400 {
-				label = "Volume Down";
-				linux,code = <KEY_VOLUMEDOWN>;
-				channel = <0>;
-				voltage = <400000>;
-			};
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			/* pull-ups and devices require PMIC regulator */
-			status = "failed";
-		};
-
-		r_uart: serial@01f02800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&r_uart_pins_a>;
-			status = "okay";
-		};
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
 	};
 };
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 382ebd1..7297f96 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -70,7 +65,18 @@
 		};
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
 	cpus {
+		enable-method = "allwinner,sun8i-a23";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -286,6 +292,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -303,6 +311,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -320,6 +330,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		pio: pinctrl@01c20800 {
@@ -343,14 +355,16 @@
 			};
 
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
 				allwinner,function = "mmc0";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc1_pins_a: mmc1@0 {
-				allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
+				allwinner,pins = "PG0", "PG1", "PG2",
+						 "PG3", "PG4", "PG5";
 				allwinner,function = "mmc1";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -577,6 +591,11 @@
 			};
 		};
 
+		cpucfg@01f01c00 {
+			compatible = "allwinner,sun8i-a23-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
 		r_uart: serial@01f02800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01f02800 0x400>;
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
new file mode 100644
index 0000000..6484dcf
--- /dev/null
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubieboard4";
+	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+};
+
+&pio {
+	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
+		allwinner,pins = "PH18";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index a3fed2b..6ce4b5e 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -64,7 +59,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -86,6 +81,29 @@
 			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_pin_optimus>;
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
 };
 
 &i2c3 {
@@ -99,6 +117,14 @@
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &pio {
 	led_pins_optimus: led-pins@0 {
 		allwinner,pins = "PH0", "PH1";
@@ -113,6 +139,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &mmc0 {
@@ -134,6 +174,12 @@
 	status = "okay";
 };
 
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_optimus>;
+	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
@@ -150,3 +196,17 @@
 	/* Enable internal pull-up */
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index f0f6fb9..ca272e9 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -114,6 +109,16 @@
 		reg = <0 0x20000000 0x02 0>;
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -137,6 +142,28 @@
 			clock-output-names = "osc32k";
 		};
 
+		usb_mod_clk: clk@00a08000 {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun9i-a80-usb-mod-clk";
+			reg = <0x00a08000 0x4>;
+			clocks = <&ahb1_gates 1>;
+			clock-output-names = "usb0_ahb", "usb_ohci0",
+					     "usb1_ahb", "usb_ohci1",
+					     "usb2_ahb", "usb_ohci2";
+		};
+
+		usb_phy_clk: clk@00a08004 {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun9i-a80-usb-phy-clk";
+			reg = <0x00a08004 0x4>;
+			clocks = <&ahb1_gates 1>;
+			clock-output-names = "usb_phy0", "usb_hsic1_480M",
+					     "usb_phy1", "usb_hsic2_480M",
+					     "usb_phy2", "usb_hsic_12M";
+		};
+
 		pll4: clk@0600000c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun9i-a80-pll4-clk";
@@ -257,7 +284,7 @@
 					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
 					"ahb0_nand0", "ahb0_sdram",
 					"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
-					"ahb0_spi0","ahb0_spi1", "ahb0_spi2",
+					"ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
 					"ahb0_spi3";
 		};
 
@@ -323,6 +350,98 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		ehci0: usb@00a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 1>;
+			resets = <&usb_mod_clk 17>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@00a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
+			resets = <&usb_mod_clk 17>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@00a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_phy_clk 1>;
+			clock-names = "phy";
+			resets = <&usb_phy_clk 17>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@00a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 3>;
+			resets = <&usb_mod_clk 18>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@00a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 3>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@00a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 5>;
+			resets = <&usb_mod_clk 19>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@00a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
+			resets = <&usb_mod_clk 19>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@00a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 5>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -333,6 +452,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -345,6 +466,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -357,6 +480,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
@@ -369,6 +494,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc_config_clk: clk@01c13000 {
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index e02baa6..51cc838 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
new file mode 100644
index 0000000..200b0c9
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-LD4 Reference Board";
+	compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 49 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
new file mode 100644
index 0000000..6a34c56
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-ld4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
new file mode 100644
index 0000000..d891135
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Reference Board";
+	compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 50 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
new file mode 100644
index 0000000..dc63360
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-pro4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
new file mode 100644
index 0000000..3ea64ae
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -0,0 +1,80 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-sLD3 Reference Board";
+	compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000
+		       0xc0000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 49 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
new file mode 100644
index 0000000..248b188
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-sld3";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		timer@20000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@20000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@20001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x20001000 0x1000>,
+			      <0x20000100 0x100>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
new file mode 100644
index 0000000..dcdc4f7
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-sLD8 Reference Board";
+	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 48 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
new file mode 100644
index 0000000..baa71e1
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-sld8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
new file mode 100644
index 0000000..da271e3
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Device Tree Source for UniPhier Support Card (Expansion Board)
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&extbus {
+	support_card: support_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ethsc: ethernet@00000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x00000000 0x1000>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+		};
+
+		serialsc: uart@000b0000 {
+			compatible = "ns16550a";
+			reg = <0x000b0000 0x20>;
+			clock-frequency = <12288000>;
+			reg-shift = <1>;
+		};
+	};
+};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ab86655..0ca4a3e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -39,11 +39,14 @@
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARCH_MESON=y
 CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
 CONFIG_SOC_VF610=y
+CONFIG_SOC_LS1021A=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 9ff7b54..3743ca2 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -393,7 +393,7 @@
 CONFIG_DMA_OMAP=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_TI_EMIF=m
 CONFIG_PWM=y
diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h
index 8e3fcb9..2ef282f 100644
--- a/arch/arm/include/asm/dma-iommu.h
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -25,7 +25,7 @@
 };
 
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size);
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
 
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
 
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index 2f7e6ff..0b579b2 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -110,5 +110,6 @@
 bool xen_arch_need_swiotlb(struct device *dev,
 			   unsigned long pfn,
 			   unsigned long mfn);
+unsigned long xen_get_swiotlb_free_pages(unsigned int order);
 
 #endif /* _ASM_ARM_XEN_PAGE_H */
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index 91c7ba1..213919b 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -303,12 +303,17 @@
 
 static int of_pmu_irq_cfg(struct platform_device *pdev)
 {
-	int i;
+	int i, irq;
 	int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
 
 	if (!irqs)
 		return -ENOMEM;
 
+	/* Don't bother with PPIs; they're already affine */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0 && irq_is_percpu(irq))
+		return 0;
+
 	for (i = 0; i < pdev->num_resources; ++i) {
 		struct device_node *dn;
 		int cpu;
@@ -317,7 +322,7 @@
 				      i);
 		if (!dn) {
 			pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
-				of_node_full_name(dn), i);
+				of_node_full_name(pdev->dev.of_node), i);
 			break;
 		}
 
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index fb8d4a2..a5edd7d 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify it under
  * the terms of the GNU General Public License version 2 as published by the
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index cbefbd7..661d753 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -112,6 +112,7 @@
 #define OMAP3430_VC_CMD_ONLP_SHIFT			16
 #define OMAP3430_VC_CMD_RET_SHIFT			8
 #define OMAP3430_VC_CMD_OFF_SHIFT			0
+#define OMAP3430_SREN_MASK				(1 << 4)
 #define OMAP3430_HSEN_MASK				(1 << 3)
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
 #define OMAP3430_VALID_MASK				(1 << 24)
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index b1c7a33..e794828 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -35,6 +35,7 @@
 #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
 #define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
 #define OMAP4430_HSMCODE_MASK						(0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK						(1 << 4)
 #define OMAP4430_HSMODEEN_MASK						(1 << 3)
 #define OMAP4430_HSSCLL_SHIFT						24
 #define OMAP4430_ICEPICK_RST_SHIFT					9
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index be9ef83..076fd20 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -316,7 +316,8 @@
 	 * idle. And we can also scale voltages to zero for off-idle.
 	 * Note that no actual voltage scaling during off-idle will
 	 * happen unless the board specific twl4030 PMIC scripts are
-	 * loaded.
+	 * loaded. See also omap_vc_i2c_init for comments regarding
+	 * erratum i531.
 	 */
 	val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
 	if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
@@ -704,9 +705,16 @@
 		return;
 	}
 
+	/*
+	 * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+	 * erratum i531 "Extra Power Consumed When Repeated Start Operation
+	 * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+	 * Otherwise I2C4 eventually leads into about 23mW extra power being
+	 * consumed even during off idle using VMODE.
+	 */
 	i2c_high_speed = voltdm->pmic->i2c_high_speed;
 	if (i2c_high_speed)
-		voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+		voltdm->rmw(vc->common->i2c_cfg_clear_mask,
 			    vc->common->i2c_cfg_hsen_mask,
 			    vc->common->i2c_cfg_reg);
 
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index cdbdd78..89b83b7 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -34,6 +34,7 @@
  * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
  * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
  * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
  * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
  * @i2c_mcode_mask: MCODE field mask for I2C config register
  *
@@ -52,6 +53,7 @@
 	u8 cmd_ret_shift;
 	u8 cmd_off_shift;
 	u8 i2c_cfg_reg;
+	u8 i2c_cfg_clear_mask;
 	u8 i2c_cfg_hsen_mask;
 	u8 i2c_mcode_mask;
 };
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index 75bc4aa..71d74c9 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -40,6 +40,7 @@
 	.cmd_onlp_shift	 = OMAP3430_VC_CMD_ONLP_SHIFT,
 	.cmd_ret_shift	 = OMAP3430_VC_CMD_RET_SHIFT,
 	.cmd_off_shift	 = OMAP3430_VC_CMD_OFF_SHIFT,
+	.i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
 	.i2c_cfg_reg	 = OMAP3_PRM_VC_I2C_CFG_OFFSET,
 	.i2c_mcode_mask	 = OMAP3430_MCODE_MASK,
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index 085e5d6..2abd5fa 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -42,6 +42,7 @@
 	.cmd_ret_shift = OMAP4430_RET_SHIFT,
 	.cmd_off_shift = OMAP4430_OFF_SHIFT,
 	.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+	.i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
 	.i2c_mcode_mask	 = OMAP4430_HSMCODE_MASK,
 };
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8896e71..f096836 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -691,4 +691,13 @@
 config PXA310_ULPI
 	bool
 
+config PXA_SYSTEMS_CPLDS
+	tristate "Motherboard cplds"
+	default ARCH_LUBBOCK || MACH_MAINSTONE
+	help
+	  This driver supports the Lubbock and Mainstone multifunction chip
+	  found on the pxa25x development platform system (Lubbock) and pxa27x
+	  development platform system (Mainstone). This IO board supports the
+	  interrupts handling, ethernet controller, flash chips, etc ...
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index eb0bf76..4087d33 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -90,4 +90,5 @@
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
+obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 958cd6af..1eecf79 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -37,7 +37,9 @@
 #define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
 /* Board specific IRQs */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS		IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x)		(LUBBOCK_NR_IRQS + (x))
 #define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
 #define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
 #define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
@@ -47,8 +49,7 @@
 #define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
 
-#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE	(LUBBOCK_NR_IRQS + 32)
 
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 1bfc4e8..e82a7d3 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -120,7 +120,9 @@
 #define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
 
 /* board specific IRQs */
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_NR_IRQS	IRQ_BOARD_START
+
+#define MAINSTONE_IRQ(x)	(MAINSTONE_NR_IRQS + (x))
 #define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
 #define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
 #define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
@@ -136,6 +138,4 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
-#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
-
 #endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index d8a1be6..4ac9ab8 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -12,6 +12,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -123,84 +124,6 @@
 }
 EXPORT_SYMBOL(lubbock_set_misc_wr);
 
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= lubbock_mask_irq,
-	.irq_mask	= lubbock_mask_irq,
-	.irq_unmask	= lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	do {
-		/* clear our parent irq */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	} while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
-	int irq;
-
-	pxa25x_init_irq();
-
-	/* setup extra lubbock irqs */
-	for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
-		irq_set_chip_and_handler(irq, &lubbock_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
-	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
-	.resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
-	if (machine_is_lubbock()) {
-		register_syscore_ops(&lubbock_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
 static int lubbock_udc_is_connected(void)
 {
 	return (LUB_MISC_RD & (1 << 9)) == 0;
@@ -383,11 +306,38 @@
 	},
 };
 
+static struct resource lubbock_cplds_resources[] = {
+	[0] = {
+		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
+		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= LUBBOCK_IRQ(0),
+		.end	= LUBBOCK_IRQ(6),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lubbock_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &lubbock_cplds_resources[0],
+	.num_resources	= 3,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
+	&lubbock_cplds_device,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -648,7 +598,7 @@
 	/* Maintainer: MontaVista Software Inc. */
 	.map_io		= lubbock_map_io,
 	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= lubbock_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= lubbock_init,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 78b84c0..2c0658c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -13,6 +13,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
@@ -122,92 +123,6 @@
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
 };
 
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	MST_INTSETCLR &= ~(1 << mainstone_irq);
-	MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= mainstone_mask_irq,
-	.irq_mask	= mainstone_mask_irq,
-	.irq_unmask	= mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = MST_INTSETCLR & mainstone_irq_enabled;
-	} while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	/* setup extra Mainstone irqs */
-	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
-		irq_set_chip_and_handler(irq, &mainstone_irq_chip,
-					 handle_level_irq);
-		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
-		else
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	set_irq_flags(MAINSTONE_IRQ(8), 0);
-	set_irq_flags(MAINSTONE_IRQ(12), 0);
-
-	MST_INTMSKENA = 0;
-	MST_INTSETCLR = 0;
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
-	MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
-	.resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
-	if (machine_is_mainstone())
-		register_syscore_ops(&mainstone_irq_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= (MST_ETH_PHYS + 0x300),
@@ -487,11 +402,37 @@
 	},
 };
 
+static struct resource mst_cplds_resources[] = {
+	[0] = {
+		.start	= MST_FPGA_PHYS + 0xc0,
+		.end	= MST_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= MAINSTONE_IRQ(0),
+		.end	= MAINSTONE_IRQ(15),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mst_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &mst_cplds_resources[0],
+	.num_resources	= 3,
+};
+
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
 	&mst_flash_device[0],
 	&mst_flash_device[1],
 	&mst_gpio_keys_device,
+	&mst_cplds_device,
 };
 
 static struct pxaohci_platform_data mainstone_ohci_platform_data = {
@@ -718,7 +659,7 @@
 	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
 	.map_io		= mainstone_map_io,
 	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= mainstone_init_irq,
+	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= mainstone_init,
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
new file mode 100644
index 0000000..f1aeb54
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -0,0 +1,200 @@
+/*
+ * Intel Reference Systems cplds
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define FPGA_IRQ_MASK_EN 0x0
+#define FPGA_IRQ_SET_CLR 0x10
+
+#define CPLDS_NB_IRQ	32
+
+struct cplds {
+	void __iomem *base;
+	int irq;
+	unsigned int irq_mask;
+	struct gpio_desc *gpio0;
+	struct irq_domain *irqdomain;
+};
+
+static irqreturn_t cplds_irq_handler(int in_irq, void *d)
+{
+	struct cplds *fpga = d;
+	unsigned long pending;
+	unsigned int bit;
+
+	pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+	for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
+		generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+
+	return IRQ_HANDLED;
+}
+
+static void cplds_irq_mask_ack(struct irq_data *d)
+{
+	struct cplds *fpga = irq_data_get_irq_chip_data(d);
+	unsigned int cplds_irq = irqd_to_hwirq(d);
+	unsigned int set, bit = BIT(cplds_irq);
+
+	fpga->irq_mask &= ~bit;
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
+}
+
+static void cplds_irq_unmask(struct irq_data *d)
+{
+	struct cplds *fpga = irq_data_get_irq_chip_data(d);
+	unsigned int cplds_irq = irqd_to_hwirq(d);
+	unsigned int bit = BIT(cplds_irq);
+
+	fpga->irq_mask |= bit;
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static struct irq_chip cplds_irq_chip = {
+	.name		= "pxa_cplds",
+	.irq_mask_ack	= cplds_irq_mask_ack,
+	.irq_unmask	= cplds_irq_unmask,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hwirq)
+{
+	struct cplds *fpga = d->host_data;
+
+	irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, fpga);
+
+	return 0;
+}
+
+static const struct irq_domain_ops cplds_irq_domain_ops = {
+	.xlate = irq_domain_xlate_twocell,
+	.map = cplds_irq_domain_map,
+};
+
+static int cplds_resume(struct platform_device *pdev)
+{
+	struct cplds *fpga = platform_get_drvdata(pdev);
+
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+
+	return 0;
+}
+
+static int cplds_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct cplds *fpga;
+	int ret;
+	unsigned int base_irq = 0;
+	unsigned long irqflags = 0;
+
+	fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
+	if (!fpga)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res) {
+		fpga->irq = (unsigned int)res->start;
+		irqflags = res->flags;
+	}
+	if (!fpga->irq)
+		return -ENODEV;
+
+	base_irq = platform_get_irq(pdev, 1);
+	if (base_irq < 0)
+		base_irq = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	fpga->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(fpga->base))
+		return PTR_ERR(fpga->base);
+
+	platform_set_drvdata(pdev, fpga);
+
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+	writel(0, fpga->base + FPGA_IRQ_SET_CLR);
+
+	ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
+			       irqflags, dev_name(&pdev->dev), fpga);
+	if (ret == -ENOSYS)
+		return -EPROBE_DEFER;
+
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
+			fpga->irq, ret);
+		return ret;
+	}
+
+	irq_set_irq_wake(fpga->irq, 1);
+	fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
+					       CPLDS_NB_IRQ,
+					       &cplds_irq_domain_ops, fpga);
+	if (!fpga->irqdomain)
+		return -ENODEV;
+
+	if (base_irq) {
+		ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
+						 CPLDS_NB_IRQ);
+		if (ret) {
+			dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
+				base_irq, base_irq + CPLDS_NB_IRQ);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int cplds_remove(struct platform_device *pdev)
+{
+	struct cplds *fpga = platform_get_drvdata(pdev);
+
+	irq_set_chip_and_handler(fpga->irq, NULL, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id cplds_id_table[] = {
+	{ .compatible = "intel,lubbock-cplds-irqs", },
+	{ .compatible = "intel,mainstone-cplds-irqs", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cplds_id_table);
+
+static struct platform_driver cplds_driver = {
+	.driver		= {
+		.name	= "pxa_cplds_irqs",
+		.of_match_table = of_match_ptr(cplds_id_table),
+	},
+	.probe		= cplds_probe,
+	.remove		= cplds_remove,
+	.resume		= cplds_resume,
+};
+
+module_platform_driver(cplds_driver);
+
+MODULE_DESCRIPTION("PXA Cplds interrupts driver");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index b07d886..22812fe 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -44,9 +44,11 @@
 static phys_addr_t rk3288_bootram_phy;
 
 static struct regmap *pmu_regmap;
+static struct regmap *grf_regmap;
 static struct regmap *sgrf_regmap;
 
 static u32 rk3288_pmu_pwr_mode_con;
+static u32 rk3288_grf_soc_con0;
 static u32 rk3288_sgrf_soc_con0;
 
 static inline u32 rk3288_l2_config(void)
@@ -70,12 +72,26 @@
 {
 	u32 mode_set, mode_set1;
 
+	regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
+
 	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
 
 	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
 		    &rk3288_pmu_pwr_mode_con);
 
 	/*
+	 * We need set this bit GRF_FORCE_JTAG here, for the debug module,
+	 * otherwise, it may become inaccessible after resume.
+	 * This creates a potential security issue, as the sdmmc pins may
+	 * accept jtag data for a short time during resume if no card is
+	 * inserted.
+	 * But this is of course also true for the regular boot, before we
+	 * turn of the jtag/sdmmc autodetect.
+	 */
+	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
+		     GRF_FORCE_JTAG_WRITE);
+
+	/*
 	 * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
 	 * PCLK_WDT_GATE - disable WDT during suspend.
 	 */
@@ -83,6 +99,13 @@
 		     SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
 		     | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
 
+	/*
+	 * The dapswjdp can not auto reset before resume, that cause it may
+	 * access some illegal address during resume. Let's disable it before
+	 * suspend, and the MASKROM will enable it back.
+	 */
+	regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
+
 	/* booting address of resuming system is from this register value */
 	regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
 		     rk3288_bootram_phy);
@@ -128,6 +151,9 @@
 	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
 		     rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
 		     | SGRF_FAST_BOOT_EN_WRITE);
+
+	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
+		     GRF_FORCE_JTAG_WRITE);
 }
 
 static int rockchip_lpmode_enter(unsigned long arg)
@@ -186,6 +212,13 @@
 		return PTR_ERR(pmu_regmap);
 	}
 
+	grf_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-grf");
+	if (IS_ERR(grf_regmap)) {
+		pr_err("%s: could not find grf regmap\n", __func__);
+		return PTR_ERR(pmu_regmap);
+	}
+
 	sram_np = of_find_compatible_node(NULL, NULL,
 					  "rockchip,rk3288-pmu-sram");
 	if (!sram_np) {
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
index 03ff31d..f8a747b 100644
--- a/arch/arm/mach-rockchip/pm.h
+++ b/arch/arm/mach-rockchip/pm.h
@@ -48,6 +48,10 @@
 #define RK3288_PMU_WAKEUP_RST_CLR_CNT	0x44
 #define RK3288_PMU_PWRMODE_CON1		0x90
 
+#define RK3288_GRF_SOC_CON0		0x244
+#define GRF_FORCE_JTAG			BIT(12)
+#define GRF_FORCE_JTAG_WRITE		BIT(28)
+
 #define RK3288_SGRF_SOC_CON0		(0x0000)
 #define RK3288_SGRF_FAST_BOOT_ADDR	(0x0120)
 #define SGRF_PCLK_WDT_GATE		BIT(6)
@@ -55,6 +59,10 @@
 #define SGRF_FAST_BOOT_EN		BIT(8)
 #define SGRF_FAST_BOOT_EN_WRITE		BIT(24)
 
+#define RK3288_SGRF_CPU_CON0		(0x40)
+#define SGRF_DAPDEVICEEN		BIT(0)
+#define SGRF_DAPDEVICEEN_WRITE		BIT(16)
+
 #define RK3288_CRU_MODE_CON		0x50
 #define RK3288_CRU_SEL0_CON		0x60
 #define RK3288_CRU_SEL1_CON		0x64
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index d360ec0..b6cf3b4 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -30,11 +30,30 @@
 #include "pm.h"
 
 #define RK3288_GRF_SOC_CON0 0x244
+#define RK3288_TIMER6_7_PHYS 0xff810000
 
 static void __init rockchip_timer_init(void)
 {
 	if (of_machine_is_compatible("rockchip,rk3288")) {
 		struct regmap *grf;
+		void __iomem *reg_base;
+
+		/*
+		 * Most/all uboot versions for rk3288 don't enable timer7
+		 * which is needed for the architected timer to work.
+		 * So make sure it is running during early boot.
+		 */
+		reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
+		if (reg_base) {
+			writel(0, reg_base + 0x30);
+			writel(0xffffffff, reg_base + 0x20);
+			writel(0xffffffff, reg_base + 0x24);
+			writel(1, reg_base + 0x30);
+			dsb();
+			iounmap(reg_base);
+		} else {
+			pr_err("rockchip: could not map timer7 registers\n");
+		}
 
 		/*
 		 * Disable auto jtag/sdmmc switching that causes issues
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 09c5fe3..7e7583d 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1878,7 +1878,7 @@
  * arm_iommu_attach_device function.
  */
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
 {
 	unsigned int bits = size >> PAGE_SHIFT;
 	unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
@@ -1886,6 +1886,10 @@
 	int extensions = 1;
 	int err = -ENOMEM;
 
+	/* currently only 32-bit DMA address space is supported */
+	if (size > DMA_BIT_MASK(32) + 1)
+		return ERR_PTR(-ERANGE);
+
 	if (!bitmap_size)
 		return ERR_PTR(-EINVAL);
 
@@ -2057,13 +2061,6 @@
 	if (!iommu)
 		return false;
 
-	/*
-	 * currently arm_iommu_create_mapping() takes a max of size_t
-	 * for size param. So check this limit for now.
-	 */
-	if (size > SIZE_MAX)
-		return false;
-
 	mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
 	if (IS_ERR(mapping)) {
 		pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index aa0519e..774ef13 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -22,8 +22,6 @@
  *
  * These are the low level assembler for performing cache and TLB
  * functions on the arm1020.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index bff4c7f..ae3c27b 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -22,8 +22,6 @@
  *
  * These are the low level assembler for performing cache and TLB
  * functions on the arm1020e.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index ede8c54..32a47cc 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -441,9 +441,6 @@
 	.type	__arm925_setup, #function
 __arm925_setup:
 	mov	r0, #0
-#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
-        orr     r0,r0,#1 << 7
-#endif
 
 	/* Transparent on, D-cache clean & flush mode. See  NOTE2 above */
         orr     r0,r0,#1 << 1			@ transparent mode on
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index e494d6d..92e08bf 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -602,7 +602,6 @@
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
 	initfn	__feroceon_setup, __\name\()_proc_info
-	.long __feroceon_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index 793551d..4983250 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -4,6 +4,7 @@
 #include <linux/gfp.h>
 #include <linux/highmem.h>
 #include <linux/export.h>
+#include <linux/memblock.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -21,6 +22,20 @@
 #include <asm/xen/hypercall.h>
 #include <asm/xen/interface.h>
 
+unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+	struct memblock_region *reg;
+	gfp_t flags = __GFP_NOWARN;
+
+	for_each_memblock(memory, reg) {
+		if (reg->base < (phys_addr_t)0xffffffff) {
+			flags |= __GFP_DMA;
+			break;
+		}
+	}
+	return __get_free_pages(flags, order);
+}
+
 enum dma_cache_op {
        DMA_UNMAP,
        DMA_MAP,
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index ce7aea3..c18ddc7 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -45,7 +45,7 @@
 /*
  * For flush_tlb_others()
  */
-static volatile cpumask_t flush_cpumask;
+static cpumask_t flush_cpumask;
 static struct mm_struct *flush_mm;
 static struct vm_area_struct *flush_vma;
 static volatile unsigned long flush_va;
@@ -415,7 +415,7 @@
 	 */
 	send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
 
-	while (!cpumask_empty((cpumask_t*)&flush_cpumask)) {
+	while (!cpumask_empty(&flush_cpumask)) {
 		/* nothing. lockup detection does not belong here */
 		mb();
 	}
@@ -468,7 +468,7 @@
 			__flush_tlb_page(va);
 		}
 	}
-	cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask);
+	cpumask_clear_cpu(cpu_id, &flush_cpumask);
 }
 
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index ef17683..48304b8 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -1109,6 +1109,8 @@
 	if (!cmdline_ptr)
 		goto fail;
 	hdr->cmd_line_ptr = (unsigned long)cmdline_ptr;
+	/* Fill in upper bits of command line address, NOP on 32 bit  */
+	boot_params->ext_cmd_line_ptr = (u64)(unsigned long)cmdline_ptr >> 32;
 
 	hdr->ramdisk_image = 0;
 	hdr->ramdisk_size = 0;
diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index e42f758..055ea99 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -50,7 +50,7 @@
 /* Recognized hypervisors */
 extern const struct hypervisor_x86 x86_hyper_vmware;
 extern const struct hypervisor_x86 x86_hyper_ms_hyperv;
-extern const struct hypervisor_x86 x86_hyper_xen_hvm;
+extern const struct hypervisor_x86 x86_hyper_xen;
 extern const struct hypervisor_x86 x86_hyper_kvm;
 
 extern void init_hypervisor(struct cpuinfo_x86 *c);
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index cf87de3..64b6117 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -169,7 +169,7 @@
 	struct __raw_tickets tmp = READ_ONCE(lock->tickets);
 
 	tmp.head &= ~TICKET_SLOWPATH_FLAG;
-	return (tmp.tail - tmp.head) > TICKET_LOCK_INC;
+	return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC;
 }
 #define arch_spin_is_contended	arch_spin_is_contended
 
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 358dcd3..c44a5d5 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -269,4 +269,9 @@
 	return false;
 }
 
+static inline unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+	return __get_free_pages(__GFP_NOWARN, order);
+}
+
 #endif /* _ASM_X86_XEN_PAGE_H */
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index 36ce402..d820d8e 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -27,8 +27,8 @@
 
 static const __initconst struct hypervisor_x86 * const hypervisors[] =
 {
-#ifdef CONFIG_XEN_PVHVM
-	&x86_hyper_xen_hvm,
+#ifdef CONFIG_XEN
+	&x86_hyper_xen,
 #endif
 	&x86_hyper_vmware,
 	&x86_hyper_ms_hyperv,
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 219d3fb..960e85d 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -2533,34 +2533,6 @@
 	return x86_event_sysfs_show(page, config, event);
 }
 
-static __initconst const struct x86_pmu core_pmu = {
-	.name			= "core",
-	.handle_irq		= x86_pmu_handle_irq,
-	.disable_all		= x86_pmu_disable_all,
-	.enable_all		= core_pmu_enable_all,
-	.enable			= core_pmu_enable_event,
-	.disable		= x86_pmu_disable_event,
-	.hw_config		= x86_pmu_hw_config,
-	.schedule_events	= x86_schedule_events,
-	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
-	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
-	.event_map		= intel_pmu_event_map,
-	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
-	.apic			= 1,
-	/*
-	 * Intel PMCs cannot be accessed sanely above 32 bit width,
-	 * so we install an artificial 1<<31 period regardless of
-	 * the generic event period:
-	 */
-	.max_period		= (1ULL << 31) - 1,
-	.get_event_constraints	= intel_get_event_constraints,
-	.put_event_constraints	= intel_put_event_constraints,
-	.event_constraints	= intel_core_event_constraints,
-	.guest_get_msrs		= core_guest_get_msrs,
-	.format_attrs		= intel_arch_formats_attr,
-	.events_sysfs_show	= intel_event_sysfs_show,
-};
-
 struct intel_shared_regs *allocate_shared_regs(int cpu)
 {
 	struct intel_shared_regs *regs;
@@ -2743,6 +2715,44 @@
 	NULL,
 };
 
+static __initconst const struct x86_pmu core_pmu = {
+	.name			= "core",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= x86_pmu_disable_all,
+	.enable_all		= core_pmu_enable_all,
+	.enable			= core_pmu_enable_event,
+	.disable		= x86_pmu_disable_event,
+	.hw_config		= x86_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
+	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
+	.event_map		= intel_pmu_event_map,
+	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
+	/*
+	 * Intel PMCs cannot be accessed sanely above 32-bit width,
+	 * so we install an artificial 1<<31 period regardless of
+	 * the generic event period:
+	 */
+	.max_period		= (1ULL<<31) - 1,
+	.get_event_constraints	= intel_get_event_constraints,
+	.put_event_constraints	= intel_put_event_constraints,
+	.event_constraints	= intel_core_event_constraints,
+	.guest_get_msrs		= core_guest_get_msrs,
+	.format_attrs		= intel_arch_formats_attr,
+	.events_sysfs_show	= intel_event_sysfs_show,
+
+	/*
+	 * Virtual (or funny metal) CPU can define x86_pmu.extra_regs
+	 * together with PMU version 1 and thus be using core_pmu with
+	 * shared_regs. We need following callbacks here to allocate
+	 * it properly.
+	 */
+	.cpu_prepare		= intel_pmu_cpu_prepare,
+	.cpu_starting		= intel_pmu_cpu_starting,
+	.cpu_dying		= intel_pmu_cpu_dying,
+};
+
 static __initconst const struct x86_pmu intel_pmu = {
 	.name			= "Intel",
 	.handle_irq		= intel_pmu_handle_irq,
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c
index 3001015..4562e9e 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c
@@ -1,6 +1,13 @@
 /* Nehalem/SandBridge/Haswell uncore support */
 #include "perf_event_intel_uncore.h"
 
+/* Uncore IMC PCI IDs */
+#define PCI_DEVICE_ID_INTEL_SNB_IMC	0x0100
+#define PCI_DEVICE_ID_INTEL_IVB_IMC	0x0154
+#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC	0x0150
+#define PCI_DEVICE_ID_INTEL_HSW_IMC	0x0c00
+#define PCI_DEVICE_ID_INTEL_HSW_U_IMC	0x0a04
+
 /* SNB event control */
 #define SNB_UNC_CTL_EV_SEL_MASK			0x000000ff
 #define SNB_UNC_CTL_UMASK_MASK			0x0000ff00
@@ -472,6 +479,10 @@
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_IMC),
 		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
 	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_U_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
 	{ /* end: all zeroes */ },
 };
 
@@ -502,6 +513,7 @@
 	IMC_DEV(IVB_IMC, &ivb_uncore_pci_driver),    /* 3rd Gen Core processor */
 	IMC_DEV(IVB_E3_IMC, &ivb_uncore_pci_driver), /* Xeon E3-1200 v2/3rd Gen Core processor */
 	IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver),    /* 4th Gen Core Processor */
+	IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver),  /* 4th Gen Core ULT Mobile Processor */
 	{  /* end marker */ }
 };
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 8213da6..6e338e3 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -57,7 +57,7 @@
 	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },
 #endif
 };
-EXPORT_PER_CPU_SYMBOL_GPL(cpu_tss);
+EXPORT_PER_CPU_SYMBOL(cpu_tss);
 
 #ifdef CONFIG_X86_64
 static DEFINE_PER_CPU(unsigned char, is_idle);
@@ -156,11 +156,13 @@
 		/* FPU state will be reallocated lazily at the first use. */
 		drop_fpu(tsk);
 		free_thread_xstate(tsk);
-	} else if (!used_math()) {
-		/* kthread execs. TODO: cleanup this horror. */
-		if (WARN_ON(init_fpu(tsk)))
-			force_sig(SIGKILL, tsk);
-		user_fpu_begin();
+	} else {
+		if (!tsk_used_math(tsk)) {
+			/* kthread execs. TODO: cleanup this horror. */
+			if (WARN_ON(init_fpu(tsk)))
+				force_sig(SIGKILL, tsk);
+			user_fpu_begin();
+		}
 		restore_init_xstate();
 	}
 }
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 5ead4d6c..70e7444 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -351,18 +351,20 @@
  */
 void *xlate_dev_mem_ptr(phys_addr_t phys)
 {
-	void *addr;
-	unsigned long start = phys & PAGE_MASK;
+	unsigned long start  = phys &  PAGE_MASK;
+	unsigned long offset = phys & ~PAGE_MASK;
+	unsigned long vaddr;
 
 	/* If page is RAM, we can use __va. Otherwise ioremap and unmap. */
 	if (page_is_ram(start >> PAGE_SHIFT))
 		return __va(phys);
 
-	addr = (void __force *)ioremap_cache(start, PAGE_SIZE);
-	if (addr)
-		addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
+	vaddr = (unsigned long)ioremap_cache(start, PAGE_SIZE);
+	/* Only add the offset on success and return NULL if the ioremap() failed: */
+	if (vaddr)
+		vaddr += offset;
 
-	return addr;
+	return (void *)vaddr;
 }
 
 void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index e469598..d939633 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -325,6 +325,26 @@
 	kfree(info);
 }
 
+/*
+ * An IO port or MMIO resource assigned to a PCI host bridge may be
+ * consumed by the host bridge itself or available to its child
+ * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
+ * to tell whether the resource is consumed by the host bridge itself,
+ * but firmware hasn't used that bit consistently, so we can't rely on it.
+ *
+ * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
+ * to be available to child bus/devices except one special case:
+ *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
+ *     to access PCI configuration space.
+ *
+ * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
+ */
+static bool resource_is_pcicfg_ioport(struct resource *res)
+{
+	return (res->flags & IORESOURCE_IO) &&
+		res->start == 0xCF8 && res->end == 0xCFF;
+}
+
 static void probe_pci_root_info(struct pci_root_info *info,
 				struct acpi_device *device,
 				int busnum, int domain,
@@ -346,8 +366,8 @@
 			"no IO and memory resources present in _CRS\n");
 	else
 		resource_list_for_each_entry_safe(entry, tmp, list) {
-			if ((entry->res->flags & IORESOURCE_WINDOW) == 0 ||
-			    (entry->res->flags & IORESOURCE_DISABLED))
+			if ((entry->res->flags & IORESOURCE_DISABLED) ||
+			    resource_is_pcicfg_ioport(entry->res))
 				resource_list_destroy_entry(entry);
 			else
 				entry->res->name = info->name;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 94578ef..46957ea 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1760,6 +1760,9 @@
 
 static void __init xen_hvm_guest_init(void)
 {
+	if (xen_pv_domain())
+		return;
+
 	init_hvm_pv_info();
 
 	xen_hvm_init_shared_info();
@@ -1775,6 +1778,7 @@
 	xen_hvm_init_time_ops();
 	xen_hvm_init_mmu_ops();
 }
+#endif
 
 static bool xen_nopv = false;
 static __init int xen_parse_nopv(char *arg)
@@ -1784,14 +1788,11 @@
 }
 early_param("xen_nopv", xen_parse_nopv);
 
-static uint32_t __init xen_hvm_platform(void)
+static uint32_t __init xen_platform(void)
 {
 	if (xen_nopv)
 		return 0;
 
-	if (xen_pv_domain())
-		return 0;
-
 	return xen_cpuid_base();
 }
 
@@ -1809,11 +1810,19 @@
 }
 EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
 
-const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = {
-	.name			= "Xen HVM",
-	.detect			= xen_hvm_platform,
+static void xen_set_cpu_features(struct cpuinfo_x86 *c)
+{
+	if (xen_pv_domain())
+		clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
+}
+
+const struct hypervisor_x86 x86_hyper_xen = {
+	.name			= "Xen",
+	.detect			= xen_platform,
+#ifdef CONFIG_XEN_PVHVM
 	.init_platform		= xen_hvm_guest_init,
-	.x2apic_available	= xen_x2apic_para_available,
-};
-EXPORT_SYMBOL(x86_hyper_xen_hvm);
 #endif
+	.x2apic_available	= xen_x2apic_para_available,
+	.set_cpu_features       = xen_set_cpu_features,
+};
+EXPORT_SYMBOL(x86_hyper_xen);
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index d949769..53b4c08 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -88,7 +88,17 @@
 	tick_resume_local();
 }
 
+static void xen_vcpu_notify_suspend(void *data)
+{
+	tick_suspend_local();
+}
+
 void xen_arch_resume(void)
 {
 	on_each_cpu(xen_vcpu_notify_restore, NULL, 1);
 }
+
+void xen_arch_suspend(void)
+{
+	on_each_cpu(xen_vcpu_notify_suspend, NULL, 1);
+}
diff --git a/block/blk-core.c b/block/blk-core.c
index fd154b9..7871603 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -552,6 +552,8 @@
 		q->queue_lock = &q->__queue_lock;
 	spin_unlock_irq(lock);
 
+	bdi_destroy(&q->backing_dev_info);
+
 	/* @q is and will stay empty, shutdown and put */
 	blk_put_queue(q);
 }
diff --git a/block/blk-mq.c b/block/blk-mq.c
index ade8a2d..e68b71b 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -677,8 +677,11 @@
 		data.next = blk_rq_timeout(round_jiffies_up(data.next));
 		mod_timer(&q->timeout, data.next);
 	} else {
-		queue_for_each_hw_ctx(q, hctx, i)
-			blk_mq_tag_idle(hctx);
+		queue_for_each_hw_ctx(q, hctx, i) {
+			/* the hctx may be unmapped, so check it here */
+			if (blk_mq_hw_queue_mapped(hctx))
+				blk_mq_tag_idle(hctx);
+		}
 	}
 }
 
@@ -855,6 +858,16 @@
 		spin_lock(&hctx->lock);
 		list_splice(&rq_list, &hctx->dispatch);
 		spin_unlock(&hctx->lock);
+		/*
+		 * the queue is expected stopped with BLK_MQ_RQ_QUEUE_BUSY, but
+		 * it's possible the queue is stopped and restarted again
+		 * before this. Queue restart will dispatch requests. And since
+		 * requests in rq_list aren't added into hctx->dispatch yet,
+		 * the requests in rq_list might get lost.
+		 *
+		 * blk_mq_run_hw_queue() already checks the STOPPED bit
+		 **/
+		blk_mq_run_hw_queue(hctx, true);
 	}
 }
 
@@ -1571,22 +1584,6 @@
 	return NOTIFY_OK;
 }
 
-static int blk_mq_hctx_cpu_online(struct blk_mq_hw_ctx *hctx, int cpu)
-{
-	struct request_queue *q = hctx->queue;
-	struct blk_mq_tag_set *set = q->tag_set;
-
-	if (set->tags[hctx->queue_num])
-		return NOTIFY_OK;
-
-	set->tags[hctx->queue_num] = blk_mq_init_rq_map(set, hctx->queue_num);
-	if (!set->tags[hctx->queue_num])
-		return NOTIFY_STOP;
-
-	hctx->tags = set->tags[hctx->queue_num];
-	return NOTIFY_OK;
-}
-
 static int blk_mq_hctx_notify(void *data, unsigned long action,
 			      unsigned int cpu)
 {
@@ -1594,8 +1591,11 @@
 
 	if (action == CPU_DEAD || action == CPU_DEAD_FROZEN)
 		return blk_mq_hctx_cpu_offline(hctx, cpu);
-	else if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
-		return blk_mq_hctx_cpu_online(hctx, cpu);
+
+	/*
+	 * In case of CPU online, tags may be reallocated
+	 * in blk_mq_map_swqueue() after mapping is updated.
+	 */
 
 	return NOTIFY_OK;
 }
@@ -1775,6 +1775,7 @@
 	unsigned int i;
 	struct blk_mq_hw_ctx *hctx;
 	struct blk_mq_ctx *ctx;
+	struct blk_mq_tag_set *set = q->tag_set;
 
 	queue_for_each_hw_ctx(q, hctx, i) {
 		cpumask_clear(hctx->cpumask);
@@ -1803,16 +1804,20 @@
 		 * disable it and free the request entries.
 		 */
 		if (!hctx->nr_ctx) {
-			struct blk_mq_tag_set *set = q->tag_set;
-
 			if (set->tags[i]) {
 				blk_mq_free_rq_map(set, set->tags[i], i);
 				set->tags[i] = NULL;
-				hctx->tags = NULL;
 			}
+			hctx->tags = NULL;
 			continue;
 		}
 
+		/* unmapped hw queue can be remapped after CPU topo changed */
+		if (!set->tags[i])
+			set->tags[i] = blk_mq_init_rq_map(set, i);
+		hctx->tags = set->tags[i];
+		WARN_ON(!hctx->tags);
+
 		/*
 		 * Set the map size to the number of mapped software queues.
 		 * This is more accurate and more efficient than looping
@@ -2090,9 +2095,16 @@
 	 */
 	list_for_each_entry(q, &all_q_list, all_q_node)
 		blk_mq_freeze_queue_start(q);
-	list_for_each_entry(q, &all_q_list, all_q_node)
+	list_for_each_entry(q, &all_q_list, all_q_node) {
 		blk_mq_freeze_queue_wait(q);
 
+		/*
+		 * timeout handler can't touch hw queue during the
+		 * reinitialization
+		 */
+		del_timer_sync(&q->timeout);
+	}
+
 	list_for_each_entry(q, &all_q_list, all_q_node)
 		blk_mq_queue_reinit(q);
 
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index faaf36a..2b8fd30 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -522,8 +522,6 @@
 
 	blk_trace_shutdown(q);
 
-	bdi_destroy(&q->backing_dev_info);
-
 	ida_simple_remove(&blk_queue_ida, q->id);
 	call_rcu(&q->rcu_head, blk_free_queue_rcu);
 }
diff --git a/block/bounce.c b/block/bounce.c
index ab21ba2..ed9dd80 100644
--- a/block/bounce.c
+++ b/block/bounce.c
@@ -221,8 +221,8 @@
 		if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
 			continue;
 
-		inc_zone_page_state(to->bv_page, NR_BOUNCE);
 		to->bv_page = mempool_alloc(pool, q->bounce_gfp);
+		inc_zone_page_state(to->bv_page, NR_BOUNCE);
 
 		if (rw == WRITE) {
 			char *vto, *vfrom;
diff --git a/block/elevator.c b/block/elevator.c
index 59794d0..8985038 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -157,7 +157,7 @@
 
 	eq = kzalloc_node(sizeof(*eq), GFP_KERNEL, q->node);
 	if (unlikely(!eq))
-		goto err;
+		return NULL;
 
 	eq->type = e;
 	kobject_init(&eq->kobj, &elv_ktype);
@@ -165,10 +165,6 @@
 	hash_init(eq->hash);
 
 	return eq;
-err:
-	kfree(eq);
-	elevator_put(e);
-	return NULL;
 }
 EXPORT_SYMBOL(elevator_alloc);
 
diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c
index b193f84..ff6d8ad 100644
--- a/drivers/acpi/acpi_pnp.c
+++ b/drivers/acpi/acpi_pnp.c
@@ -304,6 +304,8 @@
 	{"PNPb006"},
 	/* cs423x-pnpbios */
 	{"CSC0100"},
+	{"CSC0103"},
+	{"CSC0110"},
 	{"CSC0000"},
 	{"GIM0100"},		/* Guillemot Turtlebeach something appears to be cs4232 compatible */
 	/* es18xx-pnpbios */
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 5589a6e..8244f01 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -573,7 +573,7 @@
  * @ares: Input ACPI resource object.
  * @types: Valid resource types of IORESOURCE_XXX
  *
- * This is a hepler function to support acpi_dev_get_resources(), which filters
+ * This is a helper function to support acpi_dev_get_resources(), which filters
  * ACPI resource objects according to resource types.
  */
 int acpi_dev_filter_resource_type(struct acpi_resource *ares,
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index 26e5b50..bf034f8 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/dmi.h>
 #include "sbshc.h"
 
 #define PREFIX "ACPI: "
@@ -87,6 +88,8 @@
 	ACPI_SMB_ALARM_DATA = 0x26,	/* 2 bytes alarm data */
 };
 
+static bool macbook;
+
 static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data)
 {
 	return ec_read(hc->offset + address, data);
@@ -132,6 +135,8 @@
 	}
 
 	mutex_lock(&hc->lock);
+	if (macbook)
+		udelay(5);
 	if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp))
 		goto end;
 	if (temp) {
@@ -257,12 +262,29 @@
 			      acpi_handle handle, acpi_ec_query_func func,
 			      void *data);
 
+static int macbook_dmi_match(const struct dmi_system_id *d)
+{
+	pr_debug("Detected MacBook, enabling workaround\n");
+	macbook = true;
+	return 0;
+}
+
+static struct dmi_system_id acpi_smbus_dmi_table[] = {
+	{ macbook_dmi_match, "Apple MacBook", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
+	},
+	{ },
+};
+
 static int acpi_smbus_hc_add(struct acpi_device *device)
 {
 	int status;
 	unsigned long long val;
 	struct acpi_smb_hc *hc;
 
+	dmi_check_system(acpi_smbus_dmi_table);
+
 	if (!device)
 		return -EINVAL;
 
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index ae3fcb4..d7173cb 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1620,8 +1620,8 @@
 
 static void loop_remove(struct loop_device *lo)
 {
-	del_gendisk(lo->lo_disk);
 	blk_cleanup_queue(lo->lo_queue);
+	del_gendisk(lo->lo_disk);
 	blk_mq_free_tag_set(&lo->tag_set);
 	put_disk(lo->lo_disk);
 	kfree(lo);
diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c
index 6b736b0..88f13c5 100644
--- a/drivers/block/nvme-scsi.c
+++ b/drivers/block/nvme-scsi.c
@@ -944,7 +944,8 @@
 static int nvme_trans_bdev_limits_page(struct nvme_ns *ns, struct sg_io_hdr *hdr,
 					u8 *inq_response, int alloc_len)
 {
-	__be32 max_sectors = cpu_to_be32(queue_max_hw_sectors(ns->queue));
+	__be32 max_sectors = cpu_to_be32(
+		nvme_block_nr(ns, queue_max_hw_sectors(ns->queue)));
 	__be32 max_discard = cpu_to_be32(ns->queue->limits.max_discard_sectors);
 	__be32 discard_desc_count = cpu_to_be32(0x100);
 
diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index bd2b3bb..713fc9f 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -265,17 +265,6 @@
 	atomic_dec(&blkif->persistent_gnt_in_use);
 }
 
-static void free_persistent_gnts_unmap_callback(int result,
-						struct gntab_unmap_queue_data *data)
-{
-	struct completion *c = data->data;
-
-	/* BUG_ON used to reproduce existing behaviour,
-	   but is this the best way to deal with this? */
-	BUG_ON(result);
-	complete(c);
-}
-
 static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root,
                                  unsigned int num)
 {
@@ -285,12 +274,7 @@
 	struct rb_node *n;
 	int segs_to_unmap = 0;
 	struct gntab_unmap_queue_data unmap_data;
-	struct completion unmap_completion;
 
-	init_completion(&unmap_completion);
-
-	unmap_data.data = &unmap_completion;
-	unmap_data.done = &free_persistent_gnts_unmap_callback;
 	unmap_data.pages = pages;
 	unmap_data.unmap_ops = unmap;
 	unmap_data.kunmap_ops = NULL;
@@ -310,8 +294,7 @@
 			!rb_next(&persistent_gnt->node)) {
 
 			unmap_data.count = segs_to_unmap;
-			gnttab_unmap_refs_async(&unmap_data);
-			wait_for_completion(&unmap_completion);
+			BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
 
 			put_free_pages(blkif, pages, segs_to_unmap);
 			segs_to_unmap = 0;
@@ -329,8 +312,13 @@
 	struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	struct persistent_gnt *persistent_gnt;
-	int ret, segs_to_unmap = 0;
+	int segs_to_unmap = 0;
 	struct xen_blkif *blkif = container_of(work, typeof(*blkif), persistent_purge_work);
+	struct gntab_unmap_queue_data unmap_data;
+
+	unmap_data.pages = pages;
+	unmap_data.unmap_ops = unmap;
+	unmap_data.kunmap_ops = NULL;
 
 	while(!list_empty(&blkif->persistent_purge_list)) {
 		persistent_gnt = list_first_entry(&blkif->persistent_purge_list,
@@ -346,17 +334,16 @@
 		pages[segs_to_unmap] = persistent_gnt->page;
 
 		if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
-			ret = gnttab_unmap_refs(unmap, NULL, pages,
-				segs_to_unmap);
-			BUG_ON(ret);
+			unmap_data.count = segs_to_unmap;
+			BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
 			put_free_pages(blkif, pages, segs_to_unmap);
 			segs_to_unmap = 0;
 		}
 		kfree(persistent_gnt);
 	}
 	if (segs_to_unmap > 0) {
-		ret = gnttab_unmap_refs(unmap, NULL, pages, segs_to_unmap);
-		BUG_ON(ret);
+		unmap_data.count = segs_to_unmap;
+		BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
 		put_free_pages(blkif, pages, segs_to_unmap);
 	}
 }
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index c94386a..8dcbced 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -74,6 +74,27 @@
 	return (struct zram *)dev_to_disk(dev)->private_data;
 }
 
+static ssize_t compact_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	unsigned long nr_migrated;
+	struct zram *zram = dev_to_zram(dev);
+	struct zram_meta *meta;
+
+	down_read(&zram->init_lock);
+	if (!init_done(zram)) {
+		up_read(&zram->init_lock);
+		return -EINVAL;
+	}
+
+	meta = zram->meta;
+	nr_migrated = zs_compact(meta->mem_pool);
+	atomic64_add(nr_migrated, &zram->stats.num_migrated);
+	up_read(&zram->init_lock);
+
+	return len;
+}
+
 static ssize_t disksize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -1038,6 +1059,7 @@
 	.owner = THIS_MODULE
 };
 
+static DEVICE_ATTR_WO(compact);
 static DEVICE_ATTR_RW(disksize);
 static DEVICE_ATTR_RO(initstate);
 static DEVICE_ATTR_WO(reset);
@@ -1114,6 +1136,7 @@
 	&dev_attr_num_writes.attr,
 	&dev_attr_failed_reads.attr,
 	&dev_attr_failed_writes.attr,
+	&dev_attr_compact.attr,
 	&dev_attr_invalid_io.attr,
 	&dev_attr_notify_free.attr,
 	&dev_attr_zero_pages.attr,
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index b854125..5340604 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -660,7 +660,7 @@
 		 * Initialise the fake PMU. We only need to populate the
 		 * used_mask for the purposes of validation.
 		 */
-		.used_mask = CPU_BITS_NONE,
+		.used_mask = { 0 },
 	};
 
 	if (!validate_event(event->pmu, &fake_pmu, leader))
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 11f7982..ebee57d 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -1,7 +1,7 @@
 /*
  * OMAP L3 Interconnect error handling driver
  *
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
  *	Sricharan <r.sricharan@ti.com>
  *
@@ -233,7 +233,8 @@
 }
 
 static const struct of_device_id l3_noc_match[] = {
-	{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
+	{.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
+	{.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
 	{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
 	{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
 	{},
diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index 9525458..73431f8 100644
--- a/drivers/bus/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
@@ -1,7 +1,7 @@
 /*
  * OMAP L3 Interconnect  error handling driver header
  *
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
  *	sricharan <r.sricharan@ti.com>
  *
@@ -175,16 +175,14 @@
 };
 
 
-static struct l3_target_data omap_l3_target_data_clk3[] = {
-	{0x0100, "EMUSS",},
-	{0x0300, "DEBUG SOURCE",},
-	{0x0,	"HOST CLK3",},
+static struct l3_target_data omap4_l3_target_data_clk3[] = {
+	{0x0100, "DEBUGSS",},
 };
 
-static struct l3_flagmux_data omap_l3_flagmux_clk3 = {
+static struct l3_flagmux_data omap4_l3_flagmux_clk3 = {
 	.offset = 0x0200,
-	.l3_targ = omap_l3_target_data_clk3,
-	.num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3),
+	.l3_targ = omap4_l3_target_data_clk3,
+	.num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3),
 };
 
 static struct l3_masters_data omap_l3_masters[] = {
@@ -215,21 +213,49 @@
 	{ 0x32, "USBHOSTFS"}
 };
 
-static struct l3_flagmux_data *omap_l3_flagmux[] = {
+static struct l3_flagmux_data *omap4_l3_flagmux[] = {
 	&omap_l3_flagmux_clk1,
 	&omap_l3_flagmux_clk2,
-	&omap_l3_flagmux_clk3,
+	&omap4_l3_flagmux_clk3,
 };
 
-static const struct omap_l3 omap_l3_data = {
-	.l3_flagmux = omap_l3_flagmux,
-	.num_modules = ARRAY_SIZE(omap_l3_flagmux),
+static const struct omap_l3 omap4_l3_data = {
+	.l3_flagmux = omap4_l3_flagmux,
+	.num_modules = ARRAY_SIZE(omap4_l3_flagmux),
 	.l3_masters = omap_l3_masters,
 	.num_masters = ARRAY_SIZE(omap_l3_masters),
 	/* The 6 MSBs of register field used to distinguish initiator */
 	.mst_addr_mask = 0xFC,
 };
 
+/* OMAP5 data */
+static struct l3_target_data omap5_l3_target_data_clk3[] = {
+	{0x0100, "L3INSTR",},
+	{0x0300, "DEBUGSS",},
+	{0x0,	 "HOSTCLK3",},
+};
+
+static struct l3_flagmux_data omap5_l3_flagmux_clk3 = {
+	.offset = 0x0200,
+	.l3_targ = omap5_l3_target_data_clk3,
+	.num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3),
+};
+
+static struct l3_flagmux_data *omap5_l3_flagmux[] = {
+	&omap_l3_flagmux_clk1,
+	&omap_l3_flagmux_clk2,
+	&omap5_l3_flagmux_clk3,
+};
+
+static const struct omap_l3 omap5_l3_data = {
+	.l3_flagmux = omap5_l3_flagmux,
+	.num_modules = ARRAY_SIZE(omap5_l3_flagmux),
+	.l3_masters = omap_l3_masters,
+	.num_masters = ARRAY_SIZE(omap_l3_masters),
+	/* The 6 MSBs of register field used to distinguish initiator */
+	.mst_addr_mask = 0x7E0,
+};
+
 /* DRA7 data */
 static struct l3_target_data dra_l3_target_data_clk1[] = {
 	{0x2a00, "AES1",},
@@ -274,7 +300,7 @@
 
 static struct l3_target_data dra_l3_target_data_clk2[] = {
 	{0x0,	"HOST CLK1",},
-	{0x0,	"HOST CLK2",},
+	{0x800000, "HOST CLK2",},
 	{0xdead, L3_TARGET_NOT_SUPPORTED,},
 	{0x3400, "SHA2_2",},
 	{0x0900, "BB2D",},
diff --git a/drivers/char/hw_random/bcm63xx-rng.c b/drivers/char/hw_random/bcm63xx-rng.c
index d1494ec..4b31f13 100644
--- a/drivers/char/hw_random/bcm63xx-rng.c
+++ b/drivers/char/hw_random/bcm63xx-rng.c
@@ -57,7 +57,7 @@
 	val &= ~RNG_EN;
 	__raw_writel(val, priv->regs + RNG_CTRL);
 
-	clk_didsable_unprepare(prov->clk);
+	clk_disable_unprepare(priv->clk);
 }
 
 static int bcm63xx_rng_data_present(struct hwrng *rng, int wait)
@@ -97,14 +97,14 @@
 	priv->rng.name = pdev->name;
 	priv->rng.init = bcm63xx_rng_init;
 	priv->rng.cleanup = bcm63xx_rng_cleanup;
-	prov->rng.data_present = bcm63xx_rng_data_present;
+	priv->rng.data_present = bcm63xx_rng_data_present;
 	priv->rng.data_read = bcm63xx_rng_data_read;
 
 	priv->clk = devm_clk_get(&pdev->dev, "ipsec");
 	if (IS_ERR(priv->clk)) {
-		error = PTR_ERR(priv->clk);
-		dev_err(&pdev->dev, "no clock for device: %d\n", error);
-		return error;
+		ret = PTR_ERR(priv->clk);
+		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
+		return ret;
 	}
 
 	if (!devm_request_mem_region(&pdev->dev, r->start,
@@ -120,11 +120,11 @@
 		return -ENOMEM;
 	}
 
-	error = devm_hwrng_register(&pdev->dev, &priv->rng);
-	if (error) {
+	ret = devm_hwrng_register(&pdev->dev, &priv->rng);
+	if (ret) {
 		dev_err(&pdev->dev, "failed to register rng device: %d\n",
-			error);
-		return error;
+			ret);
+		return ret;
 	}
 
 	dev_info(&pdev->dev, "registered RNG driver\n");
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 9bb5928..bf75f63 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -2000,7 +2000,7 @@
 		seq_printf(m, " %x", intf->channels[i].address);
 	seq_putc(m, '\n');
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_ipmb_proc_open(struct inode *inode, struct file *file)
@@ -2023,7 +2023,7 @@
 		   ipmi_version_major(&intf->bmc->id),
 		   ipmi_version_minor(&intf->bmc->id));
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_version_proc_open(struct inode *inode, struct file *file)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 5e90a18..8a45e92 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -942,8 +942,7 @@
 		 * If we are running to completion, start it and run
 		 * transactions until everything is clear.
 		 */
-		smi_info->curr_msg = msg;
-		smi_info->waiting_msg = NULL;
+		smi_info->waiting_msg = msg;
 
 		/*
 		 * Run to completion means we are single-threaded, no
@@ -2244,7 +2243,7 @@
 	acpi_handle handle;
 	acpi_status status;
 	unsigned long long tmp;
-	int rv;
+	int rv = -EINVAL;
 
 	acpi_dev = pnp_acpi_device(dev);
 	if (!acpi_dev)
@@ -2262,8 +2261,10 @@
 
 	/* _IFT tells us the interface type: KCS, BT, etc */
 	status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
-	if (ACPI_FAILURE(status))
+	if (ACPI_FAILURE(status)) {
+		dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
 		goto err_free;
+	}
 
 	switch (tmp) {
 	case 1:
@@ -2276,6 +2277,7 @@
 		info->si_type = SI_BT;
 		break;
 	case 4: /* SSIF, just ignore */
+		rv = -ENODEV;
 		goto err_free;
 	default:
 		dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
@@ -2336,7 +2338,7 @@
 
 err_free:
 	kfree(info);
-	return -EINVAL;
+	return rv;
 }
 
 static void ipmi_pnp_remove(struct pnp_dev *dev)
@@ -3080,7 +3082,7 @@
 
 	seq_printf(m, "%s\n", si_to_str[smi->si_type]);
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_type_proc_open(struct inode *inode, struct file *file)
@@ -3153,7 +3155,7 @@
 		   smi->irq,
 		   smi->slave_addr);
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_params_proc_open(struct inode *inode, struct file *file)
diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index f40e3bd..207689c 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -31,7 +31,6 @@
  * interface into the I2C driver, I believe.
  */
 
-#include <linux/version.h>
 #if defined(MODVERSIONS)
 #include <linux/modversions.h>
 #endif
@@ -166,6 +165,9 @@
 	/* Number of watchdog pretimeouts. */
 	SSIF_STAT_watchdog_pretimeouts,
 
+	/* Number of alers received. */
+	SSIF_STAT_alerts,
+
 	/* Always add statistics before this value, it must be last. */
 	SSIF_NUM_STATS
 };
@@ -214,7 +216,16 @@
 #define WDT_PRE_TIMEOUT_INT	0x08
 	unsigned char       msg_flags;
 
+	u8		    global_enables;
 	bool		    has_event_buffer;
+	bool		    supports_alert;
+
+	/*
+	 * Used to tell what we should do with alerts.  If we are
+	 * waiting on a response, read the data immediately.
+	 */
+	bool		    got_alert;
+	bool		    waiting_alert;
 
 	/*
 	 * If set to true, this will request events the next time the
@@ -478,13 +489,13 @@
 
 		if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
 			result = i2c_smbus_write_block_data(
-				ssif_info->client, SSIF_IPMI_REQUEST,
+				ssif_info->client, ssif_info->i2c_command,
 				ssif_info->i2c_data[0],
 				ssif_info->i2c_data + 1);
 			ssif_info->done_handler(ssif_info, result, NULL, 0);
 		} else {
 			result = i2c_smbus_read_block_data(
-				ssif_info->client, SSIF_IPMI_RESPONSE,
+				ssif_info->client, ssif_info->i2c_command,
 				ssif_info->i2c_data);
 			if (result < 0)
 				ssif_info->done_handler(ssif_info, result,
@@ -518,15 +529,12 @@
 static void msg_done_handler(struct ssif_info *ssif_info, int result,
 			     unsigned char *data, unsigned int len);
 
-static void retry_timeout(unsigned long data)
+static void start_get(struct ssif_info *ssif_info)
 {
-	struct ssif_info *ssif_info = (void *) data;
 	int rv;
 
-	if (ssif_info->stopping)
-		return;
-
 	ssif_info->rtc_us_timer = 0;
+	ssif_info->multi_pos = 0;
 
 	rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
 			  SSIF_IPMI_RESPONSE,
@@ -540,6 +548,46 @@
 	}
 }
 
+static void retry_timeout(unsigned long data)
+{
+	struct ssif_info *ssif_info = (void *) data;
+	unsigned long oflags, *flags;
+	bool waiting;
+
+	if (ssif_info->stopping)
+		return;
+
+	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+	waiting = ssif_info->waiting_alert;
+	ssif_info->waiting_alert = false;
+	ipmi_ssif_unlock_cond(ssif_info, flags);
+
+	if (waiting)
+		start_get(ssif_info);
+}
+
+
+static void ssif_alert(struct i2c_client *client, unsigned int data)
+{
+	struct ssif_info *ssif_info = i2c_get_clientdata(client);
+	unsigned long oflags, *flags;
+	bool do_get = false;
+
+	ssif_inc_stat(ssif_info, alerts);
+
+	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+	if (ssif_info->waiting_alert) {
+		ssif_info->waiting_alert = false;
+		del_timer(&ssif_info->retry_timer);
+		do_get = true;
+	} else if (ssif_info->curr_msg) {
+		ssif_info->got_alert = true;
+	}
+	ipmi_ssif_unlock_cond(ssif_info, flags);
+	if (do_get)
+		start_get(ssif_info);
+}
+
 static int start_resend(struct ssif_info *ssif_info);
 
 static void msg_done_handler(struct ssif_info *ssif_info, int result,
@@ -559,9 +607,12 @@
 		if (ssif_info->retries_left > 0) {
 			ssif_inc_stat(ssif_info, receive_retries);
 
+			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+			ssif_info->waiting_alert = true;
+			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
 			mod_timer(&ssif_info->retry_timer,
 				  jiffies + SSIF_MSG_JIFFIES);
-			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
+			ipmi_ssif_unlock_cond(ssif_info, flags);
 			return;
 		}
 
@@ -581,9 +632,9 @@
 		ssif_inc_stat(ssif_info, received_message_parts);
 
 		/* Remove the multi-part read marker. */
-		for (i = 0; i < (len-2); i++)
-			ssif_info->data[i] = data[i+2];
 		len -= 2;
+		for (i = 0; i < len; i++)
+			ssif_info->data[i] = data[i+2];
 		ssif_info->multi_len = len;
 		ssif_info->multi_pos = 1;
 
@@ -610,9 +661,9 @@
 			goto continue_op;
 		}
 
-		blocknum = data[ssif_info->multi_len];
+		blocknum = data[0];
 
-		if (ssif_info->multi_len+len-1 > IPMI_MAX_MSG_LENGTH) {
+		if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) {
 			/* Received message too big, abort the operation. */
 			result = -E2BIG;
 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
@@ -622,15 +673,15 @@
 		}
 
 		/* Remove the blocknum from the data. */
-		for (i = 0; i < (len-1); i++)
-			ssif_info->data[i+ssif_info->multi_len] = data[i+1];
 		len--;
+		for (i = 0; i < len; i++)
+			ssif_info->data[i + ssif_info->multi_len] = data[i + 1];
 		ssif_info->multi_len += len;
 		if (blocknum == 0xff) {
 			/* End of read */
 			len = ssif_info->multi_len;
 			data = ssif_info->data;
-		} else if ((blocknum+1) != ssif_info->multi_pos) {
+		} else if (blocknum + 1 != ssif_info->multi_pos) {
 			/*
 			 * Out of sequence block, just abort.  Block
 			 * numbers start at zero for the second block,
@@ -650,7 +701,7 @@
 			if (rv < 0) {
 				if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
 					pr_info(PFX
-						"Error from i2c_non_blocking_op(2)\n");
+						"Error from ssif_i2c_send\n");
 
 				result = -EIO;
 			} else
@@ -830,7 +881,11 @@
 	}
 
 	if (ssif_info->multi_data) {
-		/* In the middle of a multi-data write. */
+		/*
+		 * In the middle of a multi-data write.  See the comment
+		 * in the SSIF_MULTI_n_PART case in the probe function
+		 * for details on the intricacies of this.
+		 */
 		int left;
 
 		ssif_inc_stat(ssif_info, sent_messages_parts);
@@ -864,15 +919,32 @@
 			msg_done_handler(ssif_info, -EIO, NULL, 0);
 		}
 	} else {
+		unsigned long oflags, *flags;
+		bool got_alert;
+
 		ssif_inc_stat(ssif_info, sent_messages);
 		ssif_inc_stat(ssif_info, sent_messages_parts);
 
-		/* Wait a jiffie then request the next message */
-		ssif_info->retries_left = SSIF_RECV_RETRIES;
-		ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
-		mod_timer(&ssif_info->retry_timer,
-			  jiffies + SSIF_MSG_PART_JIFFIES);
-		return;
+		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+		got_alert = ssif_info->got_alert;
+		if (got_alert) {
+			ssif_info->got_alert = false;
+			ssif_info->waiting_alert = false;
+		}
+
+		if (got_alert) {
+			ipmi_ssif_unlock_cond(ssif_info, flags);
+			/* The alert already happened, try now. */
+			retry_timeout((unsigned long) ssif_info);
+		} else {
+			/* Wait a jiffie then request the next message */
+			ssif_info->waiting_alert = true;
+			ssif_info->retries_left = SSIF_RECV_RETRIES;
+			ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
+			mod_timer(&ssif_info->retry_timer,
+				  jiffies + SSIF_MSG_PART_JIFFIES);
+			ipmi_ssif_unlock_cond(ssif_info, flags);
+		}
 	}
 }
 
@@ -881,6 +953,8 @@
 	int rv;
 	int command;
 
+	ssif_info->got_alert = false;
+
 	if (ssif_info->data_len > 32) {
 		command = SSIF_IPMI_MULTI_PART_REQUEST_START;
 		ssif_info->multi_data = ssif_info->data;
@@ -915,7 +989,7 @@
 		return -E2BIG;
 
 	ssif_info->retries_left = SSIF_SEND_RETRIES;
-	memcpy(ssif_info->data+1, data, len);
+	memcpy(ssif_info->data + 1, data, len);
 	ssif_info->data_len = len;
 	return start_resend(ssif_info);
 }
@@ -1200,7 +1274,7 @@
 {
 	seq_puts(m, "ssif\n");
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_type_proc_open(struct inode *inode, struct file *file)
@@ -1243,6 +1317,8 @@
 		   ssif_get_stat(ssif_info, events));
 	seq_printf(m, "watchdog_pretimeouts:   %u\n",
 		   ssif_get_stat(ssif_info, watchdog_pretimeouts));
+	seq_printf(m, "alerts:                 %u\n",
+		   ssif_get_stat(ssif_info, alerts));
 	return 0;
 }
 
@@ -1258,6 +1334,23 @@
 	.release	= single_release,
 };
 
+static int strcmp_nospace(char *s1, char *s2)
+{
+	while (*s1 && *s2) {
+		while (isspace(*s1))
+			s1++;
+		while (isspace(*s2))
+			s2++;
+		if (*s1 > *s2)
+			return 1;
+		if (*s1 < *s2)
+			return -1;
+		s1++;
+		s2++;
+	}
+	return 0;
+}
+
 static struct ssif_addr_info *ssif_info_find(unsigned short addr,
 					     char *adapter_name,
 					     bool match_null_name)
@@ -1272,8 +1365,10 @@
 					/* One is NULL and one is not */
 					continue;
 				}
-				if (strcmp(info->adapter_name, adapter_name))
-					/* Names to not match */
+				if (adapter_name &&
+				    strcmp_nospace(info->adapter_name,
+						   adapter_name))
+					/* Names do not match */
 					continue;
 			}
 			found = info;
@@ -1306,6 +1401,12 @@
 	return false;
 }
 
+/*
+ * Global enables we care about.
+ */
+#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
+			     IPMI_BMC_EVT_MSG_INTR)
+
 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	unsigned char     msg[3];
@@ -1391,13 +1492,33 @@
 			break;
 
 		case SSIF_MULTI_2_PART:
-			if (ssif_info->max_xmit_msg_size > 64)
-				ssif_info->max_xmit_msg_size = 64;
+			if (ssif_info->max_xmit_msg_size > 63)
+				ssif_info->max_xmit_msg_size = 63;
 			if (ssif_info->max_recv_msg_size > 62)
 				ssif_info->max_recv_msg_size = 62;
 			break;
 
 		case SSIF_MULTI_n_PART:
+			/*
+			 * The specification is rather confusing at
+			 * this point, but I think I understand what
+			 * is meant.  At least I have a workable
+			 * solution.  With multi-part messages, you
+			 * cannot send a message that is a multiple of
+			 * 32-bytes in length, because the start and
+			 * middle messages are 32-bytes and the end
+			 * message must be at least one byte.  You
+			 * can't fudge on an extra byte, that would
+			 * screw up things like fru data writes.  So
+			 * we limit the length to 63 bytes.  That way
+			 * a 32-byte message gets sent as a single
+			 * part.  A larger message will be a 32-byte
+			 * start and the next message is always going
+			 * to be 1-31 bytes in length.  Not ideal, but
+			 * it should work.
+			 */
+			if (ssif_info->max_xmit_msg_size > 63)
+				ssif_info->max_xmit_msg_size = 63;
 			break;
 
 		default:
@@ -1407,7 +1528,7 @@
 	} else {
  no_support:
 		/* Assume no multi-part or PEC support */
-		pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so  using defaults\n",
+		pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
 		       rv, len, resp[2]);
 
 		ssif_info->max_xmit_msg_size = 32;
@@ -1436,6 +1557,8 @@
 		goto found;
 	}
 
+	ssif_info->global_enables = resp[3];
+
 	if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
 		ssif_info->has_event_buffer = true;
 		/* buffer is already enabled, nothing to do. */
@@ -1444,18 +1567,37 @@
 
 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
-	msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+	msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
 	rv = do_cmd(client, 3, msg, &len, resp);
 	if (rv || (len < 2)) {
-		pr_warn(PFX "Error getting global enables: %d %d %2.2x\n",
+		pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
 			rv, len, resp[2]);
 		rv = 0; /* Not fatal */
 		goto found;
 	}
 
-	if (resp[2] == 0)
+	if (resp[2] == 0) {
 		/* A successful return means the event buffer is supported. */
 		ssif_info->has_event_buffer = true;
+		ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
+	}
+
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+	msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
+	rv = do_cmd(client, 3, msg, &len, resp);
+	if (rv || (len < 2)) {
+		pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
+			rv, len, resp[2]);
+		rv = 0; /* Not fatal */
+		goto found;
+	}
+
+	if (resp[2] == 0) {
+		/* A successful return means the alert is supported. */
+		ssif_info->supports_alert = true;
+		ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
+	}
 
  found:
 	ssif_info->intf_num = atomic_inc_return(&next_intf);
@@ -1813,6 +1955,7 @@
 	},
 	.probe		= ssif_probe,
 	.remove		= ssif_remove,
+	.alert		= ssif_alert,
 	.id_table	= ssif_id,
 	.detect		= ssif_detect
 };
@@ -1832,7 +1975,7 @@
 		rv = new_ssif_client(addr[i], adapter_name[i],
 				     dbg[i], slave_addrs[i],
 				     SI_HARDCODED);
-		if (!rv)
+		if (rv)
 			pr_err(PFX
 			       "Couldn't add hardcoded device at addr 0x%x\n",
 			       addr[i]);
diff --git a/drivers/firmware/efi/runtime-map.c b/drivers/firmware/efi/runtime-map.c
index 87b8e3b..5c55227 100644
--- a/drivers/firmware/efi/runtime-map.c
+++ b/drivers/firmware/efi/runtime-map.c
@@ -120,7 +120,8 @@
 	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry) {
 		kset_unregister(map_kset);
-		return entry;
+		map_kset = NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	memcpy(&entry->md, efi_runtime_map + nr * efi_memdesc_size,
@@ -132,6 +133,7 @@
 	if (ret) {
 		kobject_put(&entry->kobj);
 		kset_unregister(map_kset);
+		map_kset = NULL;
 		return ERR_PTR(ret);
 	}
 
@@ -195,8 +197,6 @@
 		entry = *(map_entries + j);
 		kobject_put(&entry->kobj);
 	}
-	if (map_kset)
-		kset_unregister(map_kset);
 out:
 	return ret;
 }
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index cd1d5bf..b232397 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1054,38 +1054,8 @@
 		dev_err(bank->dev, "Could not get gpio dbck\n");
 }
 
-static void
-omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
-		    unsigned int num)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
-				    handle_simple_irq);
-	if (!gc) {
-		dev_err(bank->dev, "Memory alloc failed for gc\n");
-		return;
-	}
-
-	ct = gc->chip_types;
-
-	/* NOTE: No ack required, reading IRQ status clears it. */
-	ct->chip.irq_mask = irq_gc_mask_set_bit;
-	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-	ct->chip.irq_set_type = omap_gpio_irq_type;
-
-	if (bank->regs->wkup_en)
-		ct->chip.irq_set_wake = omap_gpio_wake_enable;
-
-	ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
-	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-}
-
 static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 {
-	int j;
 	static int gpio;
 	int irq_base = 0;
 	int ret;
@@ -1132,6 +1102,15 @@
 	}
 #endif
 
+	/* MPUIO is a bit different, reading IRQ status clears it */
+	if (bank->is_mpuio) {
+		irqc->irq_ack = dummy_irq_chip.irq_ack;
+		irqc->irq_mask = irq_gc_mask_set_bit;
+		irqc->irq_unmask = irq_gc_mask_clr_bit;
+		if (!bank->regs->wkup_en)
+			irqc->irq_set_wake = NULL;
+	}
+
 	ret = gpiochip_irqchip_add(&bank->chip, irqc,
 				   irq_base, omap_gpio_irq_handler,
 				   IRQ_TYPE_NONE);
@@ -1145,15 +1124,6 @@
 	gpiochip_set_chained_irqchip(&bank->chip, irqc,
 				     bank->irq, omap_gpio_irq_handler);
 
-	for (j = 0; j < bank->width; j++) {
-		int irq = irq_find_mapping(bank->chip.irqdomain, j);
-		if (bank->is_mpuio) {
-			omap_mpuio_alloc_gc(bank, irq, bank->width);
-			irq_set_chip_and_handler(irq, NULL, NULL);
-			set_irq_flags(irq, 0);
-		}
-	}
-
 	return 0;
 }
 
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index d2303d5..725d161 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -550,7 +550,7 @@
 
 	length = min(agpio->pin_table_length, (u16)(pin_index + bits));
 	for (i = pin_index; i < length; ++i) {
-		unsigned pin = agpio->pin_table[i];
+		int pin = agpio->pin_table[i];
 		struct acpi_gpio_connection *conn;
 		struct gpio_desc *desc;
 		bool found;
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index 7722ed5..af3bc7a 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -551,6 +551,7 @@
  */
 int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 {
+	struct gpio_chip	*chip;
 	unsigned long		flags;
 	int			status;
 	const char		*ioname = NULL;
@@ -568,8 +569,16 @@
 		return -EINVAL;
 	}
 
+	chip = desc->chip;
+
 	mutex_lock(&sysfs_lock);
 
+	/* check if chip is being removed */
+	if (!chip || !chip->exported) {
+		status = -ENODEV;
+		goto fail_unlock;
+	}
+
 	spin_lock_irqsave(&gpio_lock, flags);
 	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
 	     test_bit(FLAG_EXPORT, &desc->flags)) {
@@ -783,12 +792,15 @@
 {
 	int			status;
 	struct device		*dev;
+	struct gpio_desc *desc;
+	unsigned int i;
 
 	mutex_lock(&sysfs_lock);
 	dev = class_find_device(&gpio_class, NULL, chip, match_export);
 	if (dev) {
 		put_device(dev);
 		device_unregister(dev);
+		/* prevent further gpiod exports */
 		chip->exported = false;
 		status = 0;
 	} else
@@ -797,6 +809,13 @@
 
 	if (status)
 		chip_dbg(chip, "%s: status %d\n", __func__, status);
+
+	/* unregister gpiod class devices owned by sysfs */
+	for (i = 0; i < chip->ngpio; i++) {
+		desc = &chip->desc[i];
+		if (test_and_clear_bit(FLAG_SYSFS, &desc->flags))
+			gpiod_free(desc);
+	}
 }
 
 static int __init gpiolib_sysfs_init(void)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index 69af73f..596ee5c 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -430,9 +430,10 @@
 
 	BUG_ON(!dqm || !qpd);
 
-	BUG_ON(!list_empty(&qpd->queues_list));
+	pr_debug("In func %s\n", __func__);
 
-	pr_debug("kfd: In func %s\n", __func__);
+	pr_debug("qpd->queues_list is %s\n",
+			list_empty(&qpd->queues_list) ? "empty" : "not empty");
 
 	retval = 0;
 	mutex_lock(&dqm->lock);
@@ -882,6 +883,8 @@
 		return -ENOMEM;
 	}
 
+	init_sdma_vm(dqm, q, qpd);
+
 	retval = mqd->init_mqd(mqd, &q->mqd, &q->mqd_mem_obj,
 				&q->gart_mqd_addr, &q->properties);
 	if (retval != 0)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
index 661c660..e469c4b 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
@@ -728,9 +728,9 @@
 		sysfs_show_32bit_prop(buffer, "max_engine_clk_fcompute",
 			dev->gpu->kfd2kgd->get_max_engine_clock_in_mhz(
 					dev->gpu->kgd));
+
 		sysfs_show_64bit_prop(buffer, "local_mem_size",
-			dev->gpu->kfd2kgd->get_vmem_size(
-					dev->gpu->kgd));
+				(unsigned long long int) 0);
 
 		sysfs_show_32bit_prop(buffer, "fw_version",
 			dev->gpu->kfd2kgd->get_fw_version(
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index c8a3447..af9662e 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -131,12 +131,11 @@
 
 	/* Reinitialize corresponding vblank timestamp if high-precision query
 	 * available. Skip this step if query unsupported or failed. Will
-	 * reinitialize delayed at next vblank interrupt in that case.
+	 * reinitialize delayed at next vblank interrupt in that case and
+	 * assign 0 for now, to mark the vblanktimestamp as invalid.
 	 */
-	if (rc) {
-		tslot = atomic_read(&vblank->count) + diff;
-		vblanktimestamp(dev, crtc, tslot) = t_vblank;
-	}
+	tslot = atomic_read(&vblank->count) + diff;
+	vblanktimestamp(dev, crtc, tslot) = rc ? t_vblank : (struct timeval) {0, 0};
 
 	smp_mb__before_atomic();
 	atomic_add(diff, &vblank->count);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d547d9c8..d0f3cbc 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13635,9 +13635,6 @@
 };
 
 static struct intel_quirk intel_quirks[] = {
-	/* HP Mini needs pipe A force quirk (LP: #322104) */
-	{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
-
 	/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
 	{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index d023710..f27346e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1348,7 +1348,7 @@
 
 	pipe_config->has_dp_encoder = true;
 	pipe_config->has_drrs = false;
-	pipe_config->has_audio = intel_dp->has_audio;
+	pipe_config->has_audio = intel_dp->has_audio && port != PORT_A;
 
 	if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
 		intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
@@ -2211,8 +2211,8 @@
 	int dotclock;
 
 	tmp = I915_READ(intel_dp->output_reg);
-	if (tmp & DP_AUDIO_OUTPUT_ENABLE)
-		pipe_config->has_audio = true;
+
+	pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A;
 
 	if ((port == PORT_A) || !HAS_PCH_CPT(dev)) {
 		if (tmp & DP_SYNC_HS_HIGH)
@@ -3812,7 +3812,8 @@
 			if (val == 0)
 				break;
 
-			intel_dp->sink_rates[i] = val * 200;
+			/* Value read is in kHz while drm clock is saved in deca-kHz */
+			intel_dp->sink_rates[i] = (val * 200) / 10;
 		}
 		intel_dp->num_sink_rates = i;
 	}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 5abda1d..fbcc7df 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -813,12 +813,28 @@
 static const struct dmi_system_id intel_dual_link_lvds[] = {
 	{
 		.callback = intel_dual_link_lvds_callback,
-		.ident = "Apple MacBook Pro (Core i5/i7 Series)",
+		.ident = "Apple MacBook Pro 15\" (2010)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6,2"),
+		},
+	},
+	{
+		.callback = intel_dual_link_lvds_callback,
+		.ident = "Apple MacBook Pro 15\" (2011)",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
 		},
 	},
+	{
+		.callback = intel_dual_link_lvds_callback,
+		.ident = "Apple MacBook Pro 15\" (2012)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro9,1"),
+		},
+	},
 	{ }	/* terminating entry */
 };
 
@@ -848,6 +864,11 @@
 	if (i915.lvds_channel_mode > 0)
 		return i915.lvds_channel_mode == 2;
 
+	/* single channel LVDS is limited to 112 MHz */
+	if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock
+	    > 112999)
+		return true;
+
 	if (dmi_check_system(intel_dual_link_lvds))
 		return true;
 
@@ -1111,6 +1132,8 @@
 out:
 	mutex_unlock(&dev->mode_config.mutex);
 
+	intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
+
 	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
 	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
 		      lvds_encoder->is_dual_link ? "dual" : "single");
@@ -1125,7 +1148,6 @@
 	}
 	drm_connector_register(connector);
 
-	intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
 	intel_panel_setup_backlight(connector, INVALID_PIPE);
 
 	return;
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index d2abe48..46eb0fa 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1673,7 +1673,6 @@
 	struct radeon_bo	*vcpu_bo;
 	void			*cpu_addr;
 	uint64_t		gpu_addr;
-	void			*saved_bo;
 	atomic_t		handles[RADEON_MAX_UVD_HANDLES];
 	struct drm_file		*filp[RADEON_MAX_UVD_HANDLES];
 	unsigned		img_size[RADEON_MAX_UVD_HANDLES];
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index fafd8ce..8dbf508 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1202,7 +1202,7 @@
 static struct radeon_asic_ring rv770_uvd_ring = {
 	.ib_execute = &uvd_v1_0_ib_execute,
 	.emit_fence = &uvd_v2_2_fence_emit,
-	.emit_semaphore = &uvd_v1_0_semaphore_emit,
+	.emit_semaphore = &uvd_v2_2_semaphore_emit,
 	.cs_parse = &radeon_uvd_cs_parse,
 	.ring_test = &uvd_v1_0_ring_test,
 	.ib_test = &uvd_v1_0_ib_test,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index cf0a90b..a3ca8cd 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -949,6 +949,10 @@
 int uvd_v2_2_resume(struct radeon_device *rdev);
 void uvd_v2_2_fence_emit(struct radeon_device *rdev,
 			 struct radeon_fence *fence);
+bool uvd_v2_2_semaphore_emit(struct radeon_device *rdev,
+			     struct radeon_ring *ring,
+			     struct radeon_semaphore *semaphore,
+			     bool emit_wait);
 
 /* uvd v3.1 */
 bool uvd_v3_1_semaphore_emit(struct radeon_device *rdev,
diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c
index 8b82abb..dcb7796 100644
--- a/drivers/gpu/drm/radeon/radeon_audio.c
+++ b/drivers/gpu/drm/radeon/radeon_audio.c
@@ -464,6 +464,10 @@
 		return;
 
 	rdev = connector->encoder->dev->dev_private;
+
+	if (!radeon_audio_chipset_supported(rdev))
+		return;
+
 	radeon_encoder = to_radeon_encoder(connector->encoder);
 	dig = radeon_encoder->enc_priv;
 
diff --git a/drivers/gpu/drm/radeon/radeon_mn.c b/drivers/gpu/drm/radeon/radeon_mn.c
index 535bf40..eef006c 100644
--- a/drivers/gpu/drm/radeon/radeon_mn.c
+++ b/drivers/gpu/drm/radeon/radeon_mn.c
@@ -142,6 +142,9 @@
 
 		list_for_each_entry(bo, &node->bos, mn_list) {
 
+			if (!bo->tbo.ttm || bo->tbo.ttm->state != tt_bound)
+				continue;
+
 			r = radeon_bo_reserve(bo, true);
 			if (r) {
 				DRM_ERROR("(%ld) failed to reserve user bo\n", r);
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index b292aca..edafd3c 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -591,8 +591,7 @@
 {
 	struct radeon_device *rdev = radeon_get_rdev(ttm->bdev);
 	struct radeon_ttm_tt *gtt = (void *)ttm;
-	struct scatterlist *sg;
-	int i;
+	struct sg_page_iter sg_iter;
 
 	int write = !(gtt->userflags & RADEON_GEM_USERPTR_READONLY);
 	enum dma_data_direction direction = write ?
@@ -605,9 +604,8 @@
 	/* free the sg table and pages again */
 	dma_unmap_sg(rdev->dev, ttm->sg->sgl, ttm->sg->nents, direction);
 
-	for_each_sg(ttm->sg->sgl, sg, ttm->sg->nents, i) {
-		struct page *page = sg_page(sg);
-
+	for_each_sg_page(ttm->sg->sgl, &sg_iter, ttm->sg->nents, 0) {
+		struct page *page = sg_page_iter_page(&sg_iter);
 		if (!(gtt->userflags & RADEON_GEM_USERPTR_READONLY))
 			set_page_dirty(page);
 
diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c
index c10b2ae..6edcb54 100644
--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -204,28 +204,32 @@
 
 int radeon_uvd_suspend(struct radeon_device *rdev)
 {
-	unsigned size;
-	void *ptr;
-	int i;
+	int i, r;
 
 	if (rdev->uvd.vcpu_bo == NULL)
 		return 0;
 
-	for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i)
-		if (atomic_read(&rdev->uvd.handles[i]))
-			break;
+	for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
+		uint32_t handle = atomic_read(&rdev->uvd.handles[i]);
+		if (handle != 0) {
+			struct radeon_fence *fence;
 
-	if (i == RADEON_MAX_UVD_HANDLES)
-		return 0;
+			radeon_uvd_note_usage(rdev);
 
-	size = radeon_bo_size(rdev->uvd.vcpu_bo);
-	size -= rdev->uvd_fw->size;
+			r = radeon_uvd_get_destroy_msg(rdev,
+				R600_RING_TYPE_UVD_INDEX, handle, &fence);
+			if (r) {
+				DRM_ERROR("Error destroying UVD (%d)!\n", r);
+				continue;
+			}
 
-	ptr = rdev->uvd.cpu_addr;
-	ptr += rdev->uvd_fw->size;
+			radeon_fence_wait(fence, false);
+			radeon_fence_unref(&fence);
 
-	rdev->uvd.saved_bo = kmalloc(size, GFP_KERNEL);
-	memcpy(rdev->uvd.saved_bo, ptr, size);
+			rdev->uvd.filp[i] = NULL;
+			atomic_set(&rdev->uvd.handles[i], 0);
+		}
+	}
 
 	return 0;
 }
@@ -246,12 +250,7 @@
 	ptr = rdev->uvd.cpu_addr;
 	ptr += rdev->uvd_fw->size;
 
-	if (rdev->uvd.saved_bo != NULL) {
-		memcpy(ptr, rdev->uvd.saved_bo, size);
-		kfree(rdev->uvd.saved_bo);
-		rdev->uvd.saved_bo = NULL;
-	} else
-		memset(ptr, 0, size);
+	memset(ptr, 0, size);
 
 	return 0;
 }
@@ -396,6 +395,29 @@
 	return 0;
 }
 
+static int radeon_uvd_validate_codec(struct radeon_cs_parser *p,
+				     unsigned stream_type)
+{
+	switch (stream_type) {
+	case 0: /* H264 */
+	case 1: /* VC1 */
+		/* always supported */
+		return 0;
+
+	case 3: /* MPEG2 */
+	case 4: /* MPEG4 */
+		/* only since UVD 3 */
+		if (p->rdev->family >= CHIP_PALM)
+			return 0;
+
+		/* fall through */
+	default:
+		DRM_ERROR("UVD codec not supported by hardware %d!\n",
+			  stream_type);
+		return -EINVAL;
+	}
+}
+
 static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo,
 			     unsigned offset, unsigned buf_sizes[])
 {
@@ -436,50 +458,70 @@
 		return -EINVAL;
 	}
 
-	if (msg_type == 1) {
-		/* it's a decode msg, calc buffer sizes */
-		r = radeon_uvd_cs_msg_decode(msg, buf_sizes);
-		/* calc image size (width * height) */
-		img_size = msg[6] * msg[7];
+	switch (msg_type) {
+	case 0:
+		/* it's a create msg, calc image size (width * height) */
+		img_size = msg[7] * msg[8];
+
+		r = radeon_uvd_validate_codec(p, msg[4]);
 		radeon_bo_kunmap(bo);
 		if (r)
 			return r;
 
-	} else if (msg_type == 2) {
+		/* try to alloc a new handle */
+		for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
+			if (atomic_read(&p->rdev->uvd.handles[i]) == handle) {
+				DRM_ERROR("Handle 0x%x already in use!\n", handle);
+				return -EINVAL;
+			}
+
+			if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) {
+				p->rdev->uvd.filp[i] = p->filp;
+				p->rdev->uvd.img_size[i] = img_size;
+				return 0;
+			}
+		}
+
+		DRM_ERROR("No more free UVD handles!\n");
+		return -EINVAL;
+
+	case 1:
+		/* it's a decode msg, validate codec and calc buffer sizes */
+		r = radeon_uvd_validate_codec(p, msg[4]);
+		if (!r)
+			r = radeon_uvd_cs_msg_decode(msg, buf_sizes);
+		radeon_bo_kunmap(bo);
+		if (r)
+			return r;
+
+		/* validate the handle */
+		for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
+			if (atomic_read(&p->rdev->uvd.handles[i]) == handle) {
+				if (p->rdev->uvd.filp[i] != p->filp) {
+					DRM_ERROR("UVD handle collision detected!\n");
+					return -EINVAL;
+				}
+				return 0;
+			}
+		}
+
+		DRM_ERROR("Invalid UVD handle 0x%x!\n", handle);
+		return -ENOENT;
+
+	case 2:
 		/* it's a destroy msg, free the handle */
 		for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i)
 			atomic_cmpxchg(&p->rdev->uvd.handles[i], handle, 0);
 		radeon_bo_kunmap(bo);
 		return 0;
-	} else {
-		/* it's a create msg, calc image size (width * height) */
-		img_size = msg[7] * msg[8];
-		radeon_bo_kunmap(bo);
 
-		if (msg_type != 0) {
-			DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type);
-			return -EINVAL;
-		}
+	default:
 
-		/* it's a create msg, no special handling needed */
+		DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type);
+		return -EINVAL;
 	}
 
-	/* create or decode, validate the handle */
-	for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
-		if (atomic_read(&p->rdev->uvd.handles[i]) == handle)
-			return 0;
-	}
-
-	/* handle not found try to alloc a new one */
-	for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
-		if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) {
-			p->rdev->uvd.filp[i] = p->filp;
-			p->rdev->uvd.img_size[i] = img_size;
-			return 0;
-		}
-	}
-
-	DRM_ERROR("No more free UVD handles!\n");
+	BUG();
 	return -EINVAL;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_vce.c b/drivers/gpu/drm/radeon/radeon_vce.c
index 24f849f..0de5711 100644
--- a/drivers/gpu/drm/radeon/radeon_vce.c
+++ b/drivers/gpu/drm/radeon/radeon_vce.c
@@ -493,18 +493,27 @@
  *
  * @p: parser context
  * @handle: handle to validate
+ * @allocated: allocated a new handle?
  *
  * Validates the handle and return the found session index or -EINVAL
  * we we don't have another free session index.
  */
-int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle)
+static int radeon_vce_validate_handle(struct radeon_cs_parser *p,
+				      uint32_t handle, bool *allocated)
 {
 	unsigned i;
 
+	*allocated = false;
+
 	/* validate the handle */
 	for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) {
-		if (atomic_read(&p->rdev->vce.handles[i]) == handle)
+		if (atomic_read(&p->rdev->vce.handles[i]) == handle) {
+			if (p->rdev->vce.filp[i] != p->filp) {
+				DRM_ERROR("VCE handle collision detected!\n");
+				return -EINVAL;
+			}
 			return i;
+		}
 	}
 
 	/* handle not found try to alloc a new one */
@@ -512,6 +521,7 @@
 		if (!atomic_cmpxchg(&p->rdev->vce.handles[i], 0, handle)) {
 			p->rdev->vce.filp[i] = p->filp;
 			p->rdev->vce.img_size[i] = 0;
+			*allocated = true;
 			return i;
 		}
 	}
@@ -529,10 +539,10 @@
 int radeon_vce_cs_parse(struct radeon_cs_parser *p)
 {
 	int session_idx = -1;
-	bool destroyed = false;
+	bool destroyed = false, created = false, allocated = false;
 	uint32_t tmp, handle = 0;
 	uint32_t *size = &tmp;
-	int i, r;
+	int i, r = 0;
 
 	while (p->idx < p->chunk_ib->length_dw) {
 		uint32_t len = radeon_get_ib_value(p, p->idx);
@@ -540,18 +550,21 @@
 
 		if ((len < 8) || (len & 3)) {
 			DRM_ERROR("invalid VCE command length (%d)!\n", len);
-                	return -EINVAL;
+			r = -EINVAL;
+			goto out;
 		}
 
 		if (destroyed) {
 			DRM_ERROR("No other command allowed after destroy!\n");
-			return -EINVAL;
+			r = -EINVAL;
+			goto out;
 		}
 
 		switch (cmd) {
 		case 0x00000001: // session
 			handle = radeon_get_ib_value(p, p->idx + 2);
-			session_idx = radeon_vce_validate_handle(p, handle);
+			session_idx = radeon_vce_validate_handle(p, handle,
+								 &allocated);
 			if (session_idx < 0)
 				return session_idx;
 			size = &p->rdev->vce.img_size[session_idx];
@@ -561,6 +574,13 @@
 			break;
 
 		case 0x01000001: // create
+			created = true;
+			if (!allocated) {
+				DRM_ERROR("Handle already in use!\n");
+				r = -EINVAL;
+				goto out;
+			}
+
 			*size = radeon_get_ib_value(p, p->idx + 8) *
 				radeon_get_ib_value(p, p->idx + 10) *
 				8 * 3 / 2;
@@ -578,12 +598,12 @@
 			r = radeon_vce_cs_reloc(p, p->idx + 10, p->idx + 9,
 						*size);
 			if (r)
-				return r;
+				goto out;
 
 			r = radeon_vce_cs_reloc(p, p->idx + 12, p->idx + 11,
 						*size / 3);
 			if (r)
-				return r;
+				goto out;
 			break;
 
 		case 0x02000001: // destroy
@@ -594,7 +614,7 @@
 			r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2,
 						*size * 2);
 			if (r)
-				return r;
+				goto out;
 			break;
 
 		case 0x05000004: // video bitstream buffer
@@ -602,36 +622,47 @@
 			r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2,
 						tmp);
 			if (r)
-				return r;
+				goto out;
 			break;
 
 		case 0x05000005: // feedback buffer
 			r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2,
 						4096);
 			if (r)
-				return r;
+				goto out;
 			break;
 
 		default:
 			DRM_ERROR("invalid VCE command (0x%x)!\n", cmd);
-			return -EINVAL;
+			r = -EINVAL;
+			goto out;
 		}
 
 		if (session_idx == -1) {
 			DRM_ERROR("no session command at start of IB\n");
-			return -EINVAL;
+			r = -EINVAL;
+			goto out;
 		}
 
 		p->idx += len / 4;
 	}
 
-	if (destroyed) {
-		/* IB contains a destroy msg, free the handle */
+	if (allocated && !created) {
+		DRM_ERROR("New session without create command!\n");
+		r = -ENOENT;
+	}
+
+out:
+	if ((!r && destroyed) || (r && allocated)) {
+		/*
+		 * IB contains a destroy msg or we have allocated an
+		 * handle and got an error, anyway free the handle
+		 */
 		for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i)
 			atomic_cmpxchg(&p->rdev->vce.handles[i], handle, 0);
 	}
 
-	return 0;
+	return r;
 }
 
 /**
diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h
index 3cf1e29..9ef2064 100644
--- a/drivers/gpu/drm/radeon/rv770d.h
+++ b/drivers/gpu/drm/radeon/rv770d.h
@@ -989,6 +989,9 @@
 			 ((n) & 0x3FFF) << 16)
 
 /* UVD */
+#define UVD_SEMA_ADDR_LOW				0xef00
+#define UVD_SEMA_ADDR_HIGH				0xef04
+#define UVD_SEMA_CMD					0xef08
 #define UVD_GPCOM_VCPU_CMD				0xef0c
 #define UVD_GPCOM_VCPU_DATA0				0xef10
 #define UVD_GPCOM_VCPU_DATA1				0xef14
diff --git a/drivers/gpu/drm/radeon/uvd_v1_0.c b/drivers/gpu/drm/radeon/uvd_v1_0.c
index e72b3cb..c6b1cbc 100644
--- a/drivers/gpu/drm/radeon/uvd_v1_0.c
+++ b/drivers/gpu/drm/radeon/uvd_v1_0.c
@@ -466,18 +466,8 @@
 			     struct radeon_semaphore *semaphore,
 			     bool emit_wait)
 {
-	uint64_t addr = semaphore->gpu_addr;
-
-	radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_LOW, 0));
-	radeon_ring_write(ring, (addr >> 3) & 0x000FFFFF);
-
-	radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_HIGH, 0));
-	radeon_ring_write(ring, (addr >> 23) & 0x000FFFFF);
-
-	radeon_ring_write(ring, PACKET0(UVD_SEMA_CMD, 0));
-	radeon_ring_write(ring, emit_wait ? 1 : 0);
-
-	return true;
+	/* disable semaphores for UVD V1 hardware */
+	return false;
 }
 
 /**
diff --git a/drivers/gpu/drm/radeon/uvd_v2_2.c b/drivers/gpu/drm/radeon/uvd_v2_2.c
index 8919351..7ed778c 100644
--- a/drivers/gpu/drm/radeon/uvd_v2_2.c
+++ b/drivers/gpu/drm/radeon/uvd_v2_2.c
@@ -60,6 +60,35 @@
 }
 
 /**
+ * uvd_v2_2_semaphore_emit - emit semaphore command
+ *
+ * @rdev: radeon_device pointer
+ * @ring: radeon_ring pointer
+ * @semaphore: semaphore to emit commands for
+ * @emit_wait: true if we should emit a wait command
+ *
+ * Emit a semaphore command (either wait or signal) to the UVD ring.
+ */
+bool uvd_v2_2_semaphore_emit(struct radeon_device *rdev,
+			     struct radeon_ring *ring,
+			     struct radeon_semaphore *semaphore,
+			     bool emit_wait)
+{
+	uint64_t addr = semaphore->gpu_addr;
+
+	radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_LOW, 0));
+	radeon_ring_write(ring, (addr >> 3) & 0x000FFFFF);
+
+	radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_HIGH, 0));
+	radeon_ring_write(ring, (addr >> 23) & 0x000FFFFF);
+
+	radeon_ring_write(ring, PACKET0(UVD_SEMA_CMD, 0));
+	radeon_ring_write(ring, emit_wait ? 1 : 0);
+
+	return true;
+}
+
+/**
  * uvd_v2_2_resume - memory controller programming
  *
  * @rdev: radeon_device pointer
diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index 1833abd..bfad15a 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -173,7 +173,6 @@
 	drm->irq_enabled = true;
 
 	/* syncpoints are used for full 32-bit hardware VBLANK counters */
-	drm->vblank_disable_immediate = true;
 	drm->max_vblank_count = 0xffffffff;
 
 	err = drm_vblank_init(drm, drm->mode_config.num_crtc);
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index f80da50..38339d2 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -472,13 +472,8 @@
 	} sgid_addr, dgid_addr;
 
 
-	ret = rdma_gid2ip(&sgid_addr._sockaddr, sgid);
-	if (ret)
-		return ret;
-
-	ret = rdma_gid2ip(&dgid_addr._sockaddr, dgid);
-	if (ret)
-		return ret;
+	rdma_gid2ip(&sgid_addr._sockaddr, sgid);
+	rdma_gid2ip(&dgid_addr._sockaddr, dgid);
 
 	memset(&dev_addr, 0, sizeof(dev_addr));
 
@@ -512,10 +507,8 @@
 		struct sockaddr_in6 _sockaddr_in6;
 	} gid_addr;
 
-	ret = rdma_gid2ip(&gid_addr._sockaddr, sgid);
+	rdma_gid2ip(&gid_addr._sockaddr, sgid);
 
-	if (ret)
-		return ret;
 	memset(&dev_addr, 0, sizeof(dev_addr));
 	ret = rdma_translate_ip(&gid_addr._sockaddr, &dev_addr, vlan_id);
 	if (ret)
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index e28a494..0c14191 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -437,39 +437,38 @@
 	return cm_id_priv;
 }
 
-static void cm_mask_copy(u8 *dst, u8 *src, u8 *mask)
+static void cm_mask_copy(u32 *dst, const u32 *src, const u32 *mask)
 {
 	int i;
 
-	for (i = 0; i < IB_CM_COMPARE_SIZE / sizeof(unsigned long); i++)
-		((unsigned long *) dst)[i] = ((unsigned long *) src)[i] &
-					     ((unsigned long *) mask)[i];
+	for (i = 0; i < IB_CM_COMPARE_SIZE; i++)
+		dst[i] = src[i] & mask[i];
 }
 
 static int cm_compare_data(struct ib_cm_compare_data *src_data,
 			   struct ib_cm_compare_data *dst_data)
 {
-	u8 src[IB_CM_COMPARE_SIZE];
-	u8 dst[IB_CM_COMPARE_SIZE];
+	u32 src[IB_CM_COMPARE_SIZE];
+	u32 dst[IB_CM_COMPARE_SIZE];
 
 	if (!src_data || !dst_data)
 		return 0;
 
 	cm_mask_copy(src, src_data->data, dst_data->mask);
 	cm_mask_copy(dst, dst_data->data, src_data->mask);
-	return memcmp(src, dst, IB_CM_COMPARE_SIZE);
+	return memcmp(src, dst, sizeof(src));
 }
 
-static int cm_compare_private_data(u8 *private_data,
+static int cm_compare_private_data(u32 *private_data,
 				   struct ib_cm_compare_data *dst_data)
 {
-	u8 src[IB_CM_COMPARE_SIZE];
+	u32 src[IB_CM_COMPARE_SIZE];
 
 	if (!dst_data)
 		return 0;
 
 	cm_mask_copy(src, private_data, dst_data->mask);
-	return memcmp(src, dst_data->data, IB_CM_COMPARE_SIZE);
+	return memcmp(src, dst_data->data, sizeof(src));
 }
 
 /*
@@ -538,7 +537,7 @@
 
 static struct cm_id_private * cm_find_listen(struct ib_device *device,
 					     __be64 service_id,
-					     u8 *private_data)
+					     u32 *private_data)
 {
 	struct rb_node *node = cm.listen_service_table.rb_node;
 	struct cm_id_private *cm_id_priv;
@@ -953,7 +952,7 @@
 		cm_mask_copy(cm_id_priv->compare_data->data,
 			     compare_data->data, compare_data->mask);
 		memcpy(cm_id_priv->compare_data->mask, compare_data->mask,
-		       IB_CM_COMPARE_SIZE);
+		       sizeof(compare_data->mask));
 	}
 
 	cm_id->state = IB_CM_LISTEN;
diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h
index be068f4..8b76f0e 100644
--- a/drivers/infiniband/core/cm_msgs.h
+++ b/drivers/infiniband/core/cm_msgs.h
@@ -103,7 +103,7 @@
 	/* local ACK timeout:5, rsvd:3 */
 	u8 alt_offset139;
 
-	u8 private_data[IB_CM_REQ_PRIVATE_DATA_SIZE];
+	u32 private_data[IB_CM_REQ_PRIVATE_DATA_SIZE / sizeof(u32)];
 
 } __attribute__ ((packed));
 
@@ -801,7 +801,7 @@
 	__be16 rsvd;
 	__be64 service_id;
 
-	u8 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE];
+	u32 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE / sizeof(u32)];
 } __attribute__ ((packed));
 
 struct cm_sidr_rep_msg {
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index d570030..06441a4 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -859,19 +859,27 @@
 	memcpy(&ib->sib_addr, &path->dgid, 16);
 }
 
+static __be16 ss_get_port(const struct sockaddr_storage *ss)
+{
+	if (ss->ss_family == AF_INET)
+		return ((struct sockaddr_in *)ss)->sin_port;
+	else if (ss->ss_family == AF_INET6)
+		return ((struct sockaddr_in6 *)ss)->sin6_port;
+	BUG();
+}
+
 static void cma_save_ip4_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id,
 			      struct cma_hdr *hdr)
 {
-	struct sockaddr_in *listen4, *ip4;
+	struct sockaddr_in *ip4;
 
-	listen4 = (struct sockaddr_in *) &listen_id->route.addr.src_addr;
 	ip4 = (struct sockaddr_in *) &id->route.addr.src_addr;
-	ip4->sin_family = listen4->sin_family;
+	ip4->sin_family = AF_INET;
 	ip4->sin_addr.s_addr = hdr->dst_addr.ip4.addr;
-	ip4->sin_port = listen4->sin_port;
+	ip4->sin_port = ss_get_port(&listen_id->route.addr.src_addr);
 
 	ip4 = (struct sockaddr_in *) &id->route.addr.dst_addr;
-	ip4->sin_family = listen4->sin_family;
+	ip4->sin_family = AF_INET;
 	ip4->sin_addr.s_addr = hdr->src_addr.ip4.addr;
 	ip4->sin_port = hdr->port;
 }
@@ -879,16 +887,15 @@
 static void cma_save_ip6_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id,
 			      struct cma_hdr *hdr)
 {
-	struct sockaddr_in6 *listen6, *ip6;
+	struct sockaddr_in6 *ip6;
 
-	listen6 = (struct sockaddr_in6 *) &listen_id->route.addr.src_addr;
 	ip6 = (struct sockaddr_in6 *) &id->route.addr.src_addr;
-	ip6->sin6_family = listen6->sin6_family;
+	ip6->sin6_family = AF_INET6;
 	ip6->sin6_addr = hdr->dst_addr.ip6;
-	ip6->sin6_port = listen6->sin6_port;
+	ip6->sin6_port = ss_get_port(&listen_id->route.addr.src_addr);
 
 	ip6 = (struct sockaddr_in6 *) &id->route.addr.dst_addr;
-	ip6->sin6_family = listen6->sin6_family;
+	ip6->sin6_family = AF_INET6;
 	ip6->sin6_addr = hdr->src_addr.ip6;
 	ip6->sin6_port = hdr->port;
 }
diff --git a/drivers/infiniband/core/iwpm_msg.c b/drivers/infiniband/core/iwpm_msg.c
index b85ddbc..ab08170 100644
--- a/drivers/infiniband/core/iwpm_msg.c
+++ b/drivers/infiniband/core/iwpm_msg.c
@@ -468,7 +468,8 @@
 }
 EXPORT_SYMBOL(iwpm_add_mapping_cb);
 
-/* netlink attribute policy for the response to add and query mapping request */
+/* netlink attribute policy for the response to add and query mapping request
+ * and response with remote address info */
 static const struct nla_policy resp_query_policy[IWPM_NLA_RQUERY_MAPPING_MAX] = {
 	[IWPM_NLA_QUERY_MAPPING_SEQ]      = { .type = NLA_U32 },
 	[IWPM_NLA_QUERY_LOCAL_ADDR]       = { .len = sizeof(struct sockaddr_storage) },
@@ -559,6 +560,76 @@
 }
 EXPORT_SYMBOL(iwpm_add_and_query_mapping_cb);
 
+/*
+ * iwpm_remote_info_cb - Process a port mapper message, containing
+ *			  the remote connecting peer address info
+ */
+int iwpm_remote_info_cb(struct sk_buff *skb, struct netlink_callback *cb)
+{
+	struct nlattr *nltb[IWPM_NLA_RQUERY_MAPPING_MAX];
+	struct sockaddr_storage *local_sockaddr, *remote_sockaddr;
+	struct sockaddr_storage *mapped_loc_sockaddr, *mapped_rem_sockaddr;
+	struct iwpm_remote_info *rem_info;
+	const char *msg_type;
+	u8 nl_client;
+	int ret = -EINVAL;
+
+	msg_type = "Remote Mapping info";
+	if (iwpm_parse_nlmsg(cb, IWPM_NLA_RQUERY_MAPPING_MAX,
+				resp_query_policy, nltb, msg_type))
+		return ret;
+
+	nl_client = RDMA_NL_GET_CLIENT(cb->nlh->nlmsg_type);
+	if (!iwpm_valid_client(nl_client)) {
+		pr_info("%s: Invalid port mapper client = %d\n",
+				__func__, nl_client);
+		return ret;
+	}
+	atomic_set(&echo_nlmsg_seq, cb->nlh->nlmsg_seq);
+
+	local_sockaddr = (struct sockaddr_storage *)
+			nla_data(nltb[IWPM_NLA_QUERY_LOCAL_ADDR]);
+	remote_sockaddr = (struct sockaddr_storage *)
+			nla_data(nltb[IWPM_NLA_QUERY_REMOTE_ADDR]);
+	mapped_loc_sockaddr = (struct sockaddr_storage *)
+			nla_data(nltb[IWPM_NLA_RQUERY_MAPPED_LOC_ADDR]);
+	mapped_rem_sockaddr = (struct sockaddr_storage *)
+			nla_data(nltb[IWPM_NLA_RQUERY_MAPPED_REM_ADDR]);
+
+	if (mapped_loc_sockaddr->ss_family != local_sockaddr->ss_family ||
+		mapped_rem_sockaddr->ss_family != remote_sockaddr->ss_family) {
+		pr_info("%s: Sockaddr family doesn't match the requested one\n",
+				__func__);
+		return ret;
+	}
+	rem_info = kzalloc(sizeof(struct iwpm_remote_info), GFP_ATOMIC);
+	if (!rem_info) {
+		pr_err("%s: Unable to allocate a remote info\n", __func__);
+		ret = -ENOMEM;
+		return ret;
+	}
+	memcpy(&rem_info->mapped_loc_sockaddr, mapped_loc_sockaddr,
+	       sizeof(struct sockaddr_storage));
+	memcpy(&rem_info->remote_sockaddr, remote_sockaddr,
+	       sizeof(struct sockaddr_storage));
+	memcpy(&rem_info->mapped_rem_sockaddr, mapped_rem_sockaddr,
+	       sizeof(struct sockaddr_storage));
+	rem_info->nl_client = nl_client;
+
+	iwpm_add_remote_info(rem_info);
+
+	iwpm_print_sockaddr(local_sockaddr,
+			"remote_info: Local sockaddr:");
+	iwpm_print_sockaddr(mapped_loc_sockaddr,
+			"remote_info: Mapped local sockaddr:");
+	iwpm_print_sockaddr(remote_sockaddr,
+			"remote_info: Remote sockaddr:");
+	iwpm_print_sockaddr(mapped_rem_sockaddr,
+			"remote_info: Mapped remote sockaddr:");
+	return ret;
+}
+EXPORT_SYMBOL(iwpm_remote_info_cb);
+
 /* netlink attribute policy for the received request for mapping info */
 static const struct nla_policy resp_mapinfo_policy[IWPM_NLA_MAPINFO_REQ_MAX] = {
 	[IWPM_NLA_MAPINFO_ULIB_NAME] = { .type = NLA_STRING,
diff --git a/drivers/infiniband/core/iwpm_util.c b/drivers/infiniband/core/iwpm_util.c
index 69e9f84..a626795 100644
--- a/drivers/infiniband/core/iwpm_util.c
+++ b/drivers/infiniband/core/iwpm_util.c
@@ -33,8 +33,10 @@
 
 #include "iwpm_util.h"
 
-#define IWPM_HASH_BUCKET_SIZE	512
-#define IWPM_HASH_BUCKET_MASK	(IWPM_HASH_BUCKET_SIZE - 1)
+#define IWPM_MAPINFO_HASH_SIZE	512
+#define IWPM_MAPINFO_HASH_MASK	(IWPM_MAPINFO_HASH_SIZE - 1)
+#define IWPM_REMINFO_HASH_SIZE	64
+#define IWPM_REMINFO_HASH_MASK	(IWPM_REMINFO_HASH_SIZE - 1)
 
 static LIST_HEAD(iwpm_nlmsg_req_list);
 static DEFINE_SPINLOCK(iwpm_nlmsg_req_lock);
@@ -42,31 +44,49 @@
 static struct hlist_head *iwpm_hash_bucket;
 static DEFINE_SPINLOCK(iwpm_mapinfo_lock);
 
+static struct hlist_head *iwpm_reminfo_bucket;
+static DEFINE_SPINLOCK(iwpm_reminfo_lock);
+
 static DEFINE_MUTEX(iwpm_admin_lock);
 static struct iwpm_admin_data iwpm_admin;
 
 int iwpm_init(u8 nl_client)
 {
+	int ret = 0;
 	if (iwpm_valid_client(nl_client))
 		return -EINVAL;
 	mutex_lock(&iwpm_admin_lock);
 	if (atomic_read(&iwpm_admin.refcount) == 0) {
-		iwpm_hash_bucket = kzalloc(IWPM_HASH_BUCKET_SIZE *
+		iwpm_hash_bucket = kzalloc(IWPM_MAPINFO_HASH_SIZE *
 					sizeof(struct hlist_head), GFP_KERNEL);
 		if (!iwpm_hash_bucket) {
-			mutex_unlock(&iwpm_admin_lock);
+			ret = -ENOMEM;
 			pr_err("%s Unable to create mapinfo hash table\n", __func__);
-			return -ENOMEM;
+			goto init_exit;
+		}
+		iwpm_reminfo_bucket = kzalloc(IWPM_REMINFO_HASH_SIZE *
+					sizeof(struct hlist_head), GFP_KERNEL);
+		if (!iwpm_reminfo_bucket) {
+			kfree(iwpm_hash_bucket);
+			ret = -ENOMEM;
+			pr_err("%s Unable to create reminfo hash table\n", __func__);
+			goto init_exit;
 		}
 	}
 	atomic_inc(&iwpm_admin.refcount);
+init_exit:
 	mutex_unlock(&iwpm_admin_lock);
-	iwpm_set_valid(nl_client, 1);
-	return 0;
+	if (!ret) {
+		iwpm_set_valid(nl_client, 1);
+		pr_debug("%s: Mapinfo and reminfo tables are created\n",
+				__func__);
+	}
+	return ret;
 }
 EXPORT_SYMBOL(iwpm_init);
 
 static void free_hash_bucket(void);
+static void free_reminfo_bucket(void);
 
 int iwpm_exit(u8 nl_client)
 {
@@ -81,7 +101,8 @@
 	}
 	if (atomic_dec_and_test(&iwpm_admin.refcount)) {
 		free_hash_bucket();
-		pr_debug("%s: Mapinfo hash table is destroyed\n", __func__);
+		free_reminfo_bucket();
+		pr_debug("%s: Resources are destroyed\n", __func__);
 	}
 	mutex_unlock(&iwpm_admin_lock);
 	iwpm_set_valid(nl_client, 0);
@@ -89,7 +110,7 @@
 }
 EXPORT_SYMBOL(iwpm_exit);
 
-static struct hlist_head *get_hash_bucket_head(struct sockaddr_storage *,
+static struct hlist_head *get_mapinfo_hash_bucket(struct sockaddr_storage *,
 					       struct sockaddr_storage *);
 
 int iwpm_create_mapinfo(struct sockaddr_storage *local_sockaddr,
@@ -99,9 +120,10 @@
 	struct hlist_head *hash_bucket_head;
 	struct iwpm_mapping_info *map_info;
 	unsigned long flags;
+	int ret = -EINVAL;
 
 	if (!iwpm_valid_client(nl_client))
-		return -EINVAL;
+		return ret;
 	map_info = kzalloc(sizeof(struct iwpm_mapping_info), GFP_KERNEL);
 	if (!map_info) {
 		pr_err("%s: Unable to allocate a mapping info\n", __func__);
@@ -115,13 +137,16 @@
 
 	spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
 	if (iwpm_hash_bucket) {
-		hash_bucket_head = get_hash_bucket_head(
+		hash_bucket_head = get_mapinfo_hash_bucket(
 					&map_info->local_sockaddr,
 					&map_info->mapped_sockaddr);
-		hlist_add_head(&map_info->hlist_node, hash_bucket_head);
+		if (hash_bucket_head) {
+			hlist_add_head(&map_info->hlist_node, hash_bucket_head);
+			ret = 0;
+		}
 	}
 	spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags);
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(iwpm_create_mapinfo);
 
@@ -136,9 +161,12 @@
 
 	spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
 	if (iwpm_hash_bucket) {
-		hash_bucket_head = get_hash_bucket_head(
+		hash_bucket_head = get_mapinfo_hash_bucket(
 					local_sockaddr,
 					mapped_local_addr);
+		if (!hash_bucket_head)
+			goto remove_mapinfo_exit;
+
 		hlist_for_each_entry_safe(map_info, tmp_hlist_node,
 					hash_bucket_head, hlist_node) {
 
@@ -152,6 +180,7 @@
 			}
 		}
 	}
+remove_mapinfo_exit:
 	spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags);
 	return ret;
 }
@@ -166,7 +195,7 @@
 
 	/* remove all the mapinfo data from the list */
 	spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
-	for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) {
+	for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
 		hlist_for_each_entry_safe(map_info, tmp_hlist_node,
 			&iwpm_hash_bucket[i], hlist_node) {
 
@@ -180,6 +209,96 @@
 	spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags);
 }
 
+static void free_reminfo_bucket(void)
+{
+	struct hlist_node *tmp_hlist_node;
+	struct iwpm_remote_info *rem_info;
+	unsigned long flags;
+	int i;
+
+	/* remove all the remote info from the list */
+	spin_lock_irqsave(&iwpm_reminfo_lock, flags);
+	for (i = 0; i < IWPM_REMINFO_HASH_SIZE; i++) {
+		hlist_for_each_entry_safe(rem_info, tmp_hlist_node,
+			&iwpm_reminfo_bucket[i], hlist_node) {
+
+				hlist_del_init(&rem_info->hlist_node);
+				kfree(rem_info);
+			}
+	}
+	/* free the hash list */
+	kfree(iwpm_reminfo_bucket);
+	iwpm_reminfo_bucket = NULL;
+	spin_unlock_irqrestore(&iwpm_reminfo_lock, flags);
+}
+
+static struct hlist_head *get_reminfo_hash_bucket(struct sockaddr_storage *,
+						struct sockaddr_storage *);
+
+void iwpm_add_remote_info(struct iwpm_remote_info *rem_info)
+{
+	struct hlist_head *hash_bucket_head;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iwpm_reminfo_lock, flags);
+	if (iwpm_reminfo_bucket) {
+		hash_bucket_head = get_reminfo_hash_bucket(
+					&rem_info->mapped_loc_sockaddr,
+					&rem_info->mapped_rem_sockaddr);
+		if (hash_bucket_head)
+			hlist_add_head(&rem_info->hlist_node, hash_bucket_head);
+	}
+	spin_unlock_irqrestore(&iwpm_reminfo_lock, flags);
+}
+
+int iwpm_get_remote_info(struct sockaddr_storage *mapped_loc_addr,
+				struct sockaddr_storage *mapped_rem_addr,
+				struct sockaddr_storage *remote_addr,
+				u8 nl_client)
+{
+	struct hlist_node *tmp_hlist_node;
+	struct hlist_head *hash_bucket_head;
+	struct iwpm_remote_info *rem_info = NULL;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (!iwpm_valid_client(nl_client)) {
+		pr_info("%s: Invalid client = %d\n", __func__, nl_client);
+		return ret;
+	}
+	spin_lock_irqsave(&iwpm_reminfo_lock, flags);
+	if (iwpm_reminfo_bucket) {
+		hash_bucket_head = get_reminfo_hash_bucket(
+					mapped_loc_addr,
+					mapped_rem_addr);
+		if (!hash_bucket_head)
+			goto get_remote_info_exit;
+		hlist_for_each_entry_safe(rem_info, tmp_hlist_node,
+					hash_bucket_head, hlist_node) {
+
+			if (!iwpm_compare_sockaddr(&rem_info->mapped_loc_sockaddr,
+				mapped_loc_addr) &&
+				!iwpm_compare_sockaddr(&rem_info->mapped_rem_sockaddr,
+				mapped_rem_addr)) {
+
+				memcpy(remote_addr, &rem_info->remote_sockaddr,
+					sizeof(struct sockaddr_storage));
+				iwpm_print_sockaddr(remote_addr,
+						"get_remote_info: Remote sockaddr:");
+
+				hlist_del_init(&rem_info->hlist_node);
+				kfree(rem_info);
+				ret = 0;
+				break;
+			}
+		}
+	}
+get_remote_info_exit:
+	spin_unlock_irqrestore(&iwpm_reminfo_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(iwpm_get_remote_info);
+
 struct iwpm_nlmsg_request *iwpm_get_nlmsg_request(__u32 nlmsg_seq,
 					u8 nl_client, gfp_t gfp)
 {
@@ -409,31 +528,54 @@
 	return hash;
 }
 
-static struct hlist_head *get_hash_bucket_head(struct sockaddr_storage
-					       *local_sockaddr,
-					       struct sockaddr_storage
-					       *mapped_sockaddr)
+static int get_hash_bucket(struct sockaddr_storage *a_sockaddr,
+				struct sockaddr_storage *b_sockaddr, u32 *hash)
 {
-	u32 local_hash, mapped_hash, hash;
+	u32 a_hash, b_hash;
 
-	if (local_sockaddr->ss_family == AF_INET) {
-		local_hash = iwpm_ipv4_jhash((struct sockaddr_in *) local_sockaddr);
-		mapped_hash = iwpm_ipv4_jhash((struct sockaddr_in *) mapped_sockaddr);
+	if (a_sockaddr->ss_family == AF_INET) {
+		a_hash = iwpm_ipv4_jhash((struct sockaddr_in *) a_sockaddr);
+		b_hash = iwpm_ipv4_jhash((struct sockaddr_in *) b_sockaddr);
 
-	} else if (local_sockaddr->ss_family == AF_INET6) {
-		local_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) local_sockaddr);
-		mapped_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) mapped_sockaddr);
+	} else if (a_sockaddr->ss_family == AF_INET6) {
+		a_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) a_sockaddr);
+		b_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) b_sockaddr);
 	} else {
 		pr_err("%s: Invalid sockaddr family\n", __func__);
-		return NULL;
+		return -EINVAL;
 	}
 
-	if (local_hash == mapped_hash) /* if port mapper isn't available */
-		hash = local_hash;
+	if (a_hash == b_hash) /* if port mapper isn't available */
+		*hash = a_hash;
 	else
-		hash = jhash_2words(local_hash, mapped_hash, 0);
+		*hash = jhash_2words(a_hash, b_hash, 0);
+	return 0;
+}
 
-	return &iwpm_hash_bucket[hash & IWPM_HASH_BUCKET_MASK];
+static struct hlist_head *get_mapinfo_hash_bucket(struct sockaddr_storage
+				*local_sockaddr, struct sockaddr_storage
+				*mapped_sockaddr)
+{
+	u32 hash;
+	int ret;
+
+	ret = get_hash_bucket(local_sockaddr, mapped_sockaddr, &hash);
+	if (ret)
+		return NULL;
+	return &iwpm_hash_bucket[hash & IWPM_MAPINFO_HASH_MASK];
+}
+
+static struct hlist_head *get_reminfo_hash_bucket(struct sockaddr_storage
+				*mapped_loc_sockaddr, struct sockaddr_storage
+				*mapped_rem_sockaddr)
+{
+	u32 hash;
+	int ret;
+
+	ret = get_hash_bucket(mapped_loc_sockaddr, mapped_rem_sockaddr, &hash);
+	if (ret)
+		return NULL;
+	return &iwpm_reminfo_bucket[hash & IWPM_REMINFO_HASH_MASK];
 }
 
 static int send_mapinfo_num(u32 mapping_num, u8 nl_client, int iwpm_pid)
@@ -512,7 +654,7 @@
 	}
 	skb_num++;
 	spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
-	for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) {
+	for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
 		hlist_for_each_entry(map_info, &iwpm_hash_bucket[i],
 				     hlist_node) {
 			if (map_info->nl_client != nl_client)
@@ -595,7 +737,7 @@
 
 	spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
 	if (iwpm_hash_bucket) {
-		for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) {
+		for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
 			if (!hlist_empty(&iwpm_hash_bucket[i])) {
 				full_bucket = 1;
 				break;
diff --git a/drivers/infiniband/core/iwpm_util.h b/drivers/infiniband/core/iwpm_util.h
index 9777c86..ee2d9ff 100644
--- a/drivers/infiniband/core/iwpm_util.h
+++ b/drivers/infiniband/core/iwpm_util.h
@@ -76,6 +76,14 @@
 	u8     nl_client;
 };
 
+struct iwpm_remote_info {
+	struct hlist_node hlist_node;
+	struct sockaddr_storage remote_sockaddr;
+	struct sockaddr_storage mapped_loc_sockaddr;
+	struct sockaddr_storage mapped_rem_sockaddr;
+	u8     nl_client;
+};
+
 struct iwpm_admin_data {
 	atomic_t refcount;
 	atomic_t nlmsg_seq;
@@ -128,6 +136,13 @@
 int iwpm_get_nlmsg_seq(void);
 
 /**
+ * iwpm_add_reminfo - Add remote address info of the connecting peer
+ *                    to the remote info hash table
+ * @reminfo: The remote info to be added
+ */
+void iwpm_add_remote_info(struct iwpm_remote_info *reminfo);
+
+/**
  * iwpm_valid_client - Check if the port mapper client is valid
  * @nl_client: The index of the netlink client
  *
diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c
index 8b8cc6f..40becdb 100644
--- a/drivers/infiniband/core/umem_odp.c
+++ b/drivers/infiniband/core/umem_odp.c
@@ -446,7 +446,6 @@
 	int remove_existing_mapping = 0;
 	int ret = 0;
 
-	mutex_lock(&umem->odp_data->umem_mutex);
 	/*
 	 * Note: we avoid writing if seq is different from the initial seq, to
 	 * handle case of a racing notifier. This check also allows us to bail
@@ -479,8 +478,6 @@
 	}
 
 out:
-	mutex_unlock(&umem->odp_data->umem_mutex);
-
 	/* On Demand Paging - avoid pinning the page */
 	if (umem->context->invalidate_range || !stored_page)
 		put_page(page);
@@ -586,6 +583,7 @@
 
 		bcnt -= min_t(size_t, npages << PAGE_SHIFT, bcnt);
 		user_virt += npages << PAGE_SHIFT;
+		mutex_lock(&umem->odp_data->umem_mutex);
 		for (j = 0; j < npages; ++j) {
 			ret = ib_umem_odp_map_dma_single_page(
 				umem, k, base_virt_addr, local_page_list[j],
@@ -594,6 +592,7 @@
 				break;
 			k++;
 		}
+		mutex_unlock(&umem->odp_data->umem_mutex);
 
 		if (ret < 0) {
 			/* Release left over pages when handling errors. */
@@ -633,12 +632,11 @@
 	 * faults from completion. We might be racing with other
 	 * invalidations, so we must make sure we free each page only
 	 * once. */
+	mutex_lock(&umem->odp_data->umem_mutex);
 	for (addr = virt; addr < bound; addr += (u64)umem->page_size) {
 		idx = (addr - ib_umem_start(umem)) / PAGE_SIZE;
-		mutex_lock(&umem->odp_data->umem_mutex);
 		if (umem->odp_data->page_list[idx]) {
 			struct page *page = umem->odp_data->page_list[idx];
-			struct page *head_page = compound_head(page);
 			dma_addr_t dma = umem->odp_data->dma_list[idx];
 			dma_addr_t dma_addr = dma & ODP_DMA_ADDR_MASK;
 
@@ -646,7 +644,8 @@
 
 			ib_dma_unmap_page(dev, dma_addr, PAGE_SIZE,
 					  DMA_BIDIRECTIONAL);
-			if (dma & ODP_WRITE_ALLOWED_BIT)
+			if (dma & ODP_WRITE_ALLOWED_BIT) {
+				struct page *head_page = compound_head(page);
 				/*
 				 * set_page_dirty prefers being called with
 				 * the page lock. However, MMU notifiers are
@@ -657,13 +656,14 @@
 				 * be removed.
 				 */
 				set_page_dirty(head_page);
+			}
 			/* on demand pinning support */
 			if (!umem->context->invalidate_range)
 				put_page(page);
 			umem->odp_data->page_list[idx] = NULL;
 			umem->odp_data->dma_list[idx] = 0;
 		}
-		mutex_unlock(&umem->odp_data->umem_mutex);
 	}
+	mutex_unlock(&umem->odp_data->umem_mutex);
 }
 EXPORT_SYMBOL(ib_umem_odp_unmap_dma_pages);
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 57176dd..bb95a6c 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -583,6 +583,22 @@
 		sizeof(ep->com.mapped_remote_addr));
 }
 
+static int get_remote_addr(struct c4iw_ep *ep)
+{
+	int ret;
+
+	print_addr(&ep->com, __func__, "get_remote_addr");
+
+	ret = iwpm_get_remote_info(&ep->com.mapped_local_addr,
+				   &ep->com.mapped_remote_addr,
+				   &ep->com.remote_addr, RDMA_NL_C4IW);
+	if (ret)
+		pr_info(MOD "Unable to find remote peer addr info - err %d\n",
+			ret);
+
+	return ret;
+}
+
 static void best_mtu(const unsigned short *mtus, unsigned short mtu,
 		     unsigned int *idx, int use_ts, int ipv6)
 {
@@ -675,7 +691,7 @@
 	if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) {
 		opt2 |= T5_OPT_2_VALID_F;
 		opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE);
-		opt2 |= CONG_CNTRL_VALID; /* OPT_2_ISS for T5 */
+		opt2 |= T5_ISS_F;
 	}
 	t4_set_arp_err_handler(skb, ep, act_open_req_arp_failure);
 
@@ -2042,9 +2058,12 @@
 	     status, status2errno(status));
 
 	if (is_neg_adv(status)) {
-		dev_warn(&dev->rdev.lldi.pdev->dev,
-			 "Connection problems for atid %u status %u (%s)\n",
-			 atid, status, neg_adv_str(status));
+		PDBG("%s Connection problems for atid %u status %u (%s)\n",
+		     __func__, atid, status, neg_adv_str(status));
+		ep->stats.connect_neg_adv++;
+		mutex_lock(&dev->rdev.stats.lock);
+		dev->rdev.stats.neg_adv++;
+		mutex_unlock(&dev->rdev.stats.lock);
 		return 0;
 	}
 
@@ -2214,7 +2233,7 @@
 		u32 isn = (prandom_u32() & ~7UL) - 1;
 		opt2 |= T5_OPT_2_VALID_F;
 		opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE);
-		opt2 |= CONG_CNTRL_VALID; /* OPT_2_ISS for T5 */
+		opt2 |= T5_ISS_F;
 		rpl5 = (void *)rpl;
 		memset(&rpl5->iss, 0, roundup(sizeof(*rpl5)-sizeof(*rpl), 16));
 		if (peer2peer)
@@ -2352,27 +2371,57 @@
 	state_set(&child_ep->com, CONNECTING);
 	child_ep->com.dev = dev;
 	child_ep->com.cm_id = NULL;
+
+	/*
+	 * The mapped_local and mapped_remote addresses get setup with
+	 * the actual 4-tuple.  The local address will be based on the
+	 * actual local address of the connection, but on the port number
+	 * of the parent listening endpoint.  The remote address is
+	 * setup based on a query to the IWPM since we don't know what it
+	 * originally was before mapping.  If no mapping was done, then
+	 * mapped_remote == remote, and mapped_local == local.
+	 */
 	if (iptype == 4) {
 		struct sockaddr_in *sin = (struct sockaddr_in *)
-			&child_ep->com.local_addr;
+			&child_ep->com.mapped_local_addr;
+
 		sin->sin_family = PF_INET;
 		sin->sin_port = local_port;
 		sin->sin_addr.s_addr = *(__be32 *)local_ip;
-		sin = (struct sockaddr_in *)&child_ep->com.remote_addr;
+
+		sin = (struct sockaddr_in *)&child_ep->com.local_addr;
+		sin->sin_family = PF_INET;
+		sin->sin_port = ((struct sockaddr_in *)
+				 &parent_ep->com.local_addr)->sin_port;
+		sin->sin_addr.s_addr = *(__be32 *)local_ip;
+
+		sin = (struct sockaddr_in *)&child_ep->com.mapped_remote_addr;
 		sin->sin_family = PF_INET;
 		sin->sin_port = peer_port;
 		sin->sin_addr.s_addr = *(__be32 *)peer_ip;
 	} else {
 		struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)
-			&child_ep->com.local_addr;
+			&child_ep->com.mapped_local_addr;
+
 		sin6->sin6_family = PF_INET6;
 		sin6->sin6_port = local_port;
 		memcpy(sin6->sin6_addr.s6_addr, local_ip, 16);
-		sin6 = (struct sockaddr_in6 *)&child_ep->com.remote_addr;
+
+		sin6 = (struct sockaddr_in6 *)&child_ep->com.local_addr;
+		sin6->sin6_family = PF_INET6;
+		sin6->sin6_port = ((struct sockaddr_in6 *)
+				   &parent_ep->com.local_addr)->sin6_port;
+		memcpy(sin6->sin6_addr.s6_addr, local_ip, 16);
+
+		sin6 = (struct sockaddr_in6 *)&child_ep->com.mapped_remote_addr;
 		sin6->sin6_family = PF_INET6;
 		sin6->sin6_port = peer_port;
 		memcpy(sin6->sin6_addr.s6_addr, peer_ip, 16);
 	}
+	memcpy(&child_ep->com.remote_addr, &child_ep->com.mapped_remote_addr,
+	       sizeof(child_ep->com.remote_addr));
+	get_remote_addr(child_ep);
+
 	c4iw_get_ep(&parent_ep->com);
 	child_ep->parent_ep = parent_ep;
 	child_ep->tos = PASS_OPEN_TOS_G(ntohl(req->tos_stid));
@@ -2520,9 +2569,13 @@
 
 	ep = lookup_tid(t, tid);
 	if (is_neg_adv(req->status)) {
-		dev_warn(&dev->rdev.lldi.pdev->dev,
-			 "Negative advice on abort - tid %u status %d (%s)\n",
-			 ep->hwtid, req->status, neg_adv_str(req->status));
+		PDBG("%s Negative advice on abort- tid %u status %d (%s)\n",
+		     __func__, ep->hwtid, req->status,
+		     neg_adv_str(req->status));
+		ep->stats.abort_neg_adv++;
+		mutex_lock(&dev->rdev.stats.lock);
+		dev->rdev.stats.neg_adv++;
+		mutex_unlock(&dev->rdev.stats.lock);
 		return 0;
 	}
 	PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid,
@@ -3571,7 +3624,7 @@
 	 * TP will ignore any value > 0 for MSS index.
 	 */
 	req->tcb.opt0 = cpu_to_be64(MSS_IDX_V(0xF));
-	req->cookie = (unsigned long)skb;
+	req->cookie = (uintptr_t)skb;
 
 	set_wr_txq(req_skb, CPL_PRIORITY_CONTROL, port_id);
 	ret = cxgb4_ofld_send(dev->rdev.lldi.ports[0], req_skb);
@@ -3931,9 +3984,11 @@
 		return 0;
 	}
 	if (is_neg_adv(req->status)) {
-		dev_warn(&dev->rdev.lldi.pdev->dev,
-			 "Negative advice on abort - tid %u status %d (%s)\n",
-			 ep->hwtid, req->status, neg_adv_str(req->status));
+		PDBG("%s Negative advice on abort- tid %u status %d (%s)\n",
+		     __func__, ep->hwtid, req->status,
+		     neg_adv_str(req->status));
+		ep->stats.abort_neg_adv++;
+		dev->rdev.stats.neg_adv++;
 		kfree_skb(skb);
 		return 0;
 	}
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index ab7692a..68ddb37 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -55,7 +55,7 @@
 			FW_RI_RES_WR_NRES_V(1) |
 			FW_WR_COMPL_F);
 	res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16));
-	res_wr->cookie = (unsigned long) &wr_wait;
+	res_wr->cookie = (uintptr_t)&wr_wait;
 	res = res_wr->res;
 	res->u.cq.restype = FW_RI_RES_TYPE_CQ;
 	res->u.cq.op = FW_RI_RES_OP_RESET;
@@ -125,7 +125,7 @@
 			FW_RI_RES_WR_NRES_V(1) |
 			FW_WR_COMPL_F);
 	res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16));
-	res_wr->cookie = (unsigned long) &wr_wait;
+	res_wr->cookie = (uintptr_t)&wr_wait;
 	res = res_wr->res;
 	res->u.cq.restype = FW_RI_RES_TYPE_CQ;
 	res->u.cq.op = FW_RI_RES_OP_WRITE;
@@ -156,12 +156,19 @@
 		goto err4;
 
 	cq->gen = 1;
-	cq->gts = rdev->lldi.gts_reg;
 	cq->rdev = rdev;
 	if (user) {
-		cq->ugts = (u64)pci_resource_start(rdev->lldi.pdev, 2) +
-					(cq->cqid << rdev->cqshift);
-		cq->ugts &= PAGE_MASK;
+		u32 off = (cq->cqid << rdev->cqshift) & PAGE_MASK;
+
+		cq->ugts = (u64)rdev->bar2_pa + off;
+	} else if (is_t4(rdev->lldi.adapter_type)) {
+		cq->gts = rdev->lldi.gts_reg;
+		cq->qid_mask = -1U;
+	} else {
+		u32 off = ((cq->cqid << rdev->cqshift) & PAGE_MASK) + 12;
+
+		cq->gts = rdev->bar2_kva + off;
+		cq->qid_mask = rdev->qpmask;
 	}
 	return 0;
 err4:
@@ -970,8 +977,7 @@
 	}
 	PDBG("%s cqid 0x%0x chp %p size %u memsize %zu, dma_addr 0x%0llx\n",
 	     __func__, chp->cq.cqid, chp, chp->cq.size,
-	     chp->cq.memsize,
-	     (unsigned long long) chp->cq.dma_addr);
+	     chp->cq.memsize, (unsigned long long) chp->cq.dma_addr);
 	return &chp->ibcq;
 err5:
 	kfree(mm2);
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index 8fb295e..cf54d69 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -93,6 +93,7 @@
 	[RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb},
 	[RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb},
 	[RDMA_NL_IWPM_HANDLE_ERR] = {.dump = iwpm_mapping_error_cb},
+	[RDMA_NL_IWPM_REMOTE_INFO] = {.dump = iwpm_remote_info_cb},
 	[RDMA_NL_IWPM_MAPINFO] = {.dump = iwpm_mapping_info_cb},
 	[RDMA_NL_IWPM_MAPINFO_NUM] = {.dump = iwpm_ack_mapping_info_cb}
 };
@@ -151,7 +152,7 @@
 	int prev_ts_set = 0;
 	int idx, end;
 
-#define ts2ns(ts) div64_ul((ts) * dev->rdev.lldi.cclk_ps, 1000)
+#define ts2ns(ts) div64_u64((ts) * dev->rdev.lldi.cclk_ps, 1000)
 
 	idx = atomic_read(&dev->rdev.wr_log_idx) &
 		(dev->rdev.wr_log_size - 1);
@@ -489,6 +490,7 @@
 		   dev->rdev.stats.act_ofld_conn_fails);
 	seq_printf(seq, "PAS_OFLD_CONN_FAILS: %10llu\n",
 		   dev->rdev.stats.pas_ofld_conn_fails);
+	seq_printf(seq, "NEG_ADV_RCVD: %10llu\n", dev->rdev.stats.neg_adv);
 	seq_printf(seq, "AVAILABLE IRD: %10u\n", dev->avail_ird);
 	return 0;
 }
@@ -560,10 +562,13 @@
 		cc = snprintf(epd->buf + epd->pos, space,
 			      "ep %p cm_id %p qp %p state %d flags 0x%lx "
 			      "history 0x%lx hwtid %d atid %d "
+			      "conn_na %u abort_na %u "
 			      "%pI4:%d/%d <-> %pI4:%d/%d\n",
 			      ep, ep->com.cm_id, ep->com.qp,
 			      (int)ep->com.state, ep->com.flags,
 			      ep->com.history, ep->hwtid, ep->atid,
+			      ep->stats.connect_neg_adv,
+			      ep->stats.abort_neg_adv,
 			      &lsin->sin_addr, ntohs(lsin->sin_port),
 			      ntohs(mapped_lsin->sin_port),
 			      &rsin->sin_addr, ntohs(rsin->sin_port),
@@ -581,10 +586,13 @@
 		cc = snprintf(epd->buf + epd->pos, space,
 			      "ep %p cm_id %p qp %p state %d flags 0x%lx "
 			      "history 0x%lx hwtid %d atid %d "
+			      "conn_na %u abort_na %u "
 			      "%pI6:%d/%d <-> %pI6:%d/%d\n",
 			      ep, ep->com.cm_id, ep->com.qp,
 			      (int)ep->com.state, ep->com.flags,
 			      ep->com.history, ep->hwtid, ep->atid,
+			      ep->stats.connect_neg_adv,
+			      ep->stats.abort_neg_adv,
 			      &lsin6->sin6_addr, ntohs(lsin6->sin6_port),
 			      ntohs(mapped_lsin6->sin6_port),
 			      &rsin6->sin6_addr, ntohs(rsin6->sin6_port),
@@ -765,6 +773,29 @@
 	c4iw_init_dev_ucontext(rdev, &rdev->uctx);
 
 	/*
+	 * This implementation assumes udb_density == ucq_density!  Eventually
+	 * we might need to support this but for now fail the open. Also the
+	 * cqid and qpid range must match for now.
+	 */
+	if (rdev->lldi.udb_density != rdev->lldi.ucq_density) {
+		pr_err(MOD "%s: unsupported udb/ucq densities %u/%u\n",
+		       pci_name(rdev->lldi.pdev), rdev->lldi.udb_density,
+		       rdev->lldi.ucq_density);
+		err = -EINVAL;
+		goto err1;
+	}
+	if (rdev->lldi.vr->qp.start != rdev->lldi.vr->cq.start ||
+	    rdev->lldi.vr->qp.size != rdev->lldi.vr->cq.size) {
+		pr_err(MOD "%s: unsupported qp and cq id ranges "
+		       "qp start %u size %u cq start %u size %u\n",
+		       pci_name(rdev->lldi.pdev), rdev->lldi.vr->qp.start,
+		       rdev->lldi.vr->qp.size, rdev->lldi.vr->cq.size,
+		       rdev->lldi.vr->cq.size);
+		err = -EINVAL;
+		goto err1;
+	}
+
+	/*
 	 * qpshift is the number of bits to shift the qpid left in order
 	 * to get the correct address of the doorbell for that qp.
 	 */
@@ -784,10 +815,10 @@
 	     rdev->lldi.vr->qp.size,
 	     rdev->lldi.vr->cq.start,
 	     rdev->lldi.vr->cq.size);
-	PDBG("udb len 0x%x udb base %llx db_reg %p gts_reg %p qpshift %lu "
+	PDBG("udb len 0x%x udb base %p db_reg %p gts_reg %p qpshift %lu "
 	     "qpmask 0x%x cqshift %lu cqmask 0x%x\n",
 	     (unsigned)pci_resource_len(rdev->lldi.pdev, 2),
-	     (u64)pci_resource_start(rdev->lldi.pdev, 2),
+	     (void *)pci_resource_start(rdev->lldi.pdev, 2),
 	     rdev->lldi.db_reg,
 	     rdev->lldi.gts_reg,
 	     rdev->qpshift, rdev->qpmask,
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index d87e165..97bb555 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -137,6 +137,7 @@
 	u64  tcam_full;
 	u64  act_ofld_conn_fails;
 	u64  pas_ofld_conn_fails;
+	u64  neg_adv;
 };
 
 struct c4iw_hw_queue {
@@ -814,6 +815,11 @@
 	int backlog;
 };
 
+struct c4iw_ep_stats {
+	unsigned connect_neg_adv;
+	unsigned abort_neg_adv;
+};
+
 struct c4iw_ep {
 	struct c4iw_ep_common com;
 	struct c4iw_ep *parent_ep;
@@ -846,6 +852,7 @@
 	unsigned int retry_count;
 	int snd_win;
 	int rcv_win;
+	struct c4iw_ep_stats stats;
 };
 
 static inline void print_addr(struct c4iw_ep_common *epc, const char *func,
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 3ef0cf9..cff815b 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -144,7 +144,7 @@
 		if (i == (num_wqe-1)) {
 			req->wr.wr_hi = cpu_to_be32(FW_WR_OP_V(FW_ULPTX_WR) |
 						    FW_WR_COMPL_F);
-			req->wr.wr_lo = (__force __be64)(unsigned long) &wr_wait;
+			req->wr.wr_lo = (__force __be64)&wr_wait;
 		} else
 			req->wr.wr_hi = cpu_to_be32(FW_WR_OP_V(FW_ULPTX_WR));
 		req->wr.wr_mid = cpu_to_be32(
@@ -676,12 +676,12 @@
 	mhp->attr.zbva = 0;
 	mhp->attr.va_fbo = 0;
 	mhp->attr.page_size = 0;
-	mhp->attr.len = ~0UL;
+	mhp->attr.len = ~0ULL;
 	mhp->attr.pbl_size = 0;
 
 	ret = write_tpt_entry(&rhp->rdev, 0, &stag, 1, php->pdid,
 			      FW_RI_STAG_NSMR, mhp->attr.perms,
-			      mhp->attr.mw_bind_enable, 0, 0, ~0UL, 0, 0, 0);
+			      mhp->attr.mw_bind_enable, 0, 0, ~0ULL, 0, 0, 0);
 	if (ret)
 		goto err1;
 
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 15cae5a..389ced3 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -275,7 +275,7 @@
 			FW_RI_RES_WR_NRES_V(2) |
 			FW_WR_COMPL_F);
 	res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16));
-	res_wr->cookie = (unsigned long) &wr_wait;
+	res_wr->cookie = (uintptr_t)&wr_wait;
 	res = res_wr->res;
 	res->u.sqrq.restype = FW_RI_RES_TYPE_SQ;
 	res->u.sqrq.op = FW_RI_RES_OP_WRITE;
@@ -1209,7 +1209,7 @@
 	wqe->flowid_len16 = cpu_to_be32(
 		FW_WR_FLOWID_V(ep->hwtid) |
 		FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*wqe), 16)));
-	wqe->cookie = (unsigned long) &ep->com.wr_wait;
+	wqe->cookie = (uintptr_t)&ep->com.wr_wait;
 
 	wqe->u.fini.type = FW_RI_TYPE_FINI;
 	ret = c4iw_ofld_send(&rhp->rdev, skb);
@@ -1279,7 +1279,7 @@
 		FW_WR_FLOWID_V(qhp->ep->hwtid) |
 		FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*wqe), 16)));
 
-	wqe->cookie = (unsigned long) &qhp->ep->com.wr_wait;
+	wqe->cookie = (uintptr_t)&qhp->ep->com.wr_wait;
 
 	wqe->u.init.type = FW_RI_TYPE_INIT;
 	wqe->u.init.mpareqbit_p2ptype =
@@ -1766,11 +1766,11 @@
 		mm2->len = PAGE_ALIGN(qhp->wq.rq.memsize);
 		insert_mmap(ucontext, mm2);
 		mm3->key = uresp.sq_db_gts_key;
-		mm3->addr = (__force unsigned long) qhp->wq.sq.udb;
+		mm3->addr = (__force unsigned long)qhp->wq.sq.udb;
 		mm3->len = PAGE_SIZE;
 		insert_mmap(ucontext, mm3);
 		mm4->key = uresp.rq_db_gts_key;
-		mm4->addr = (__force unsigned long) qhp->wq.rq.udb;
+		mm4->addr = (__force unsigned long)qhp->wq.rq.udb;
 		mm4->len = PAGE_SIZE;
 		insert_mmap(ucontext, mm4);
 		if (mm5) {
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index 871cdca..7f2a6c2 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -539,6 +539,7 @@
 	size_t memsize;
 	__be64 bits_type_ts;
 	u32 cqid;
+	u32 qid_mask;
 	int vector;
 	u16 size; /* including status page */
 	u16 cidx;
@@ -563,12 +564,12 @@
 	set_bit(CQ_ARMED, &cq->flags);
 	while (cq->cidx_inc > CIDXINC_M) {
 		val = SEINTARM_V(0) | CIDXINC_V(CIDXINC_M) | TIMERREG_V(7) |
-		      INGRESSQID_V(cq->cqid);
+		      INGRESSQID_V(cq->cqid & cq->qid_mask);
 		writel(val, cq->gts);
 		cq->cidx_inc -= CIDXINC_M;
 	}
 	val = SEINTARM_V(se) | CIDXINC_V(cq->cidx_inc) | TIMERREG_V(6) |
-	      INGRESSQID_V(cq->cqid);
+	      INGRESSQID_V(cq->cqid & cq->qid_mask);
 	writel(val, cq->gts);
 	cq->cidx_inc = 0;
 	return 0;
@@ -601,7 +602,7 @@
 		u32 val;
 
 		val = SEINTARM_V(0) | CIDXINC_V(cq->cidx_inc) | TIMERREG_V(7) |
-		      INGRESSQID_V(cq->cqid);
+		      INGRESSQID_V(cq->cqid & cq->qid_mask);
 		writel(val, cq->gts);
 		cq->cidx_inc = 0;
 	}
diff --git a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h
index 5e53327..343e8daf 100644
--- a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h
+++ b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h
@@ -848,6 +848,8 @@
 #define CONG_CNTRL_V(x) ((x) << CONG_CNTRL_S)
 #define CONG_CNTRL_G(x) (((x) >> CONG_CNTRL_S) & CONG_CNTRL_M)
 
-#define CONG_CNTRL_VALID   (1 << 18)
+#define T5_ISS_S    18
+#define T5_ISS_V(x) ((x) << T5_ISS_S)
+#define T5_ISS_F    T5_ISS_V(1U)
 
 #endif /* _T4FW_RI_API_H_ */
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 3b2a6dc..9f9d5c5 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -116,6 +116,7 @@
 	[RDMA_NL_IWPM_REG_PID] = {.dump = iwpm_register_pid_cb},
 	[RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb},
 	[RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb},
+	[RDMA_NL_IWPM_REMOTE_INFO] = {.dump = iwpm_remote_info_cb},
 	[RDMA_NL_IWPM_HANDLE_ERR] = {.dump = iwpm_mapping_error_cb},
 	[RDMA_NL_IWPM_MAPINFO] = {.dump = iwpm_mapping_info_cb},
 	[RDMA_NL_IWPM_MAPINFO_NUM] = {.dump = iwpm_ack_mapping_info_cb}
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 6f09a72..72b4341 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -596,27 +596,52 @@
 	memcpy(pm_msg->if_name, nesvnic->netdev->name, IWPM_IFNAME_SIZE);
 }
 
+static void record_sockaddr_info(struct sockaddr_storage *addr_info,
+					nes_addr_t *ip_addr, u16 *port_num)
+{
+	struct sockaddr_in *in_addr = (struct sockaddr_in *)addr_info;
+
+	if (in_addr->sin_family == AF_INET) {
+		*ip_addr = ntohl(in_addr->sin_addr.s_addr);
+		*port_num = ntohs(in_addr->sin_port);
+	}
+}
+
 /*
  * nes_record_pm_msg - Save the received mapping info
  */
 static void nes_record_pm_msg(struct nes_cm_info *cm_info,
 			struct iwpm_sa_data *pm_msg)
 {
-	struct sockaddr_in *mapped_loc_addr =
-			(struct sockaddr_in *)&pm_msg->mapped_loc_addr;
-	struct sockaddr_in *mapped_rem_addr =
-			(struct sockaddr_in *)&pm_msg->mapped_rem_addr;
+	record_sockaddr_info(&pm_msg->mapped_loc_addr,
+		&cm_info->mapped_loc_addr, &cm_info->mapped_loc_port);
 
-	if (mapped_loc_addr->sin_family == AF_INET) {
-		cm_info->mapped_loc_addr =
-			ntohl(mapped_loc_addr->sin_addr.s_addr);
-		cm_info->mapped_loc_port = ntohs(mapped_loc_addr->sin_port);
-	}
-	if (mapped_rem_addr->sin_family == AF_INET) {
-		cm_info->mapped_rem_addr =
-			ntohl(mapped_rem_addr->sin_addr.s_addr);
-		cm_info->mapped_rem_port = ntohs(mapped_rem_addr->sin_port);
-	}
+	record_sockaddr_info(&pm_msg->mapped_rem_addr,
+		&cm_info->mapped_rem_addr, &cm_info->mapped_rem_port);
+}
+
+/*
+ * nes_get_reminfo - Get the address info of the remote connecting peer
+ */
+static int nes_get_remote_addr(struct nes_cm_node *cm_node)
+{
+	struct sockaddr_storage mapped_loc_addr, mapped_rem_addr;
+	struct sockaddr_storage remote_addr;
+	int ret;
+
+	nes_create_sockaddr(htonl(cm_node->mapped_loc_addr),
+			htons(cm_node->mapped_loc_port), &mapped_loc_addr);
+	nes_create_sockaddr(htonl(cm_node->mapped_rem_addr),
+			htons(cm_node->mapped_rem_port), &mapped_rem_addr);
+
+	ret = iwpm_get_remote_info(&mapped_loc_addr, &mapped_rem_addr,
+				&remote_addr, RDMA_NL_NES);
+	if (ret)
+		nes_debug(NES_DBG_CM, "Unable to find remote peer address info\n");
+	else
+		record_sockaddr_info(&remote_addr, &cm_node->rem_addr,
+				&cm_node->rem_port);
+	return ret;
 }
 
 /**
@@ -1566,9 +1591,14 @@
 		return NULL;
 
 	/* set our node specific transport info */
-	cm_node->loc_addr = cm_info->loc_addr;
+	if (listener) {
+		cm_node->loc_addr = listener->loc_addr;
+		cm_node->loc_port = listener->loc_port;
+	} else {
+		cm_node->loc_addr = cm_info->loc_addr;
+		cm_node->loc_port = cm_info->loc_port;
+	}
 	cm_node->rem_addr = cm_info->rem_addr;
-	cm_node->loc_port = cm_info->loc_port;
 	cm_node->rem_port = cm_info->rem_port;
 
 	cm_node->mapped_loc_addr = cm_info->mapped_loc_addr;
@@ -2151,6 +2181,7 @@
 		cm_node->state = NES_CM_STATE_ESTABLISHED;
 		if (datasize) {
 			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
+			nes_get_remote_addr(cm_node);
 			handle_rcv_mpa(cm_node, skb);
 		} else { /* rcvd ACK only */
 			dev_kfree_skb_any(skb);
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index ffd48bf..ba5173e2 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -1136,7 +1136,6 @@
 extern u32 qib_cpulist_count;
 extern unsigned long *qib_cpulist;
 
-extern unsigned qib_wc_pat;
 extern unsigned qib_cc_table_size;
 int qib_init(struct qib_devdata *, int);
 int init_chip_wc_pat(struct qib_devdata *dd, u32);
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index 9ea6c44..7258818 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -835,7 +835,8 @@
 	vma->vm_flags &= ~VM_MAYREAD;
 	vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
 
-	if (qib_wc_pat)
+	/* We used PAT if wc_cookie == 0 */
+	if (!dd->wc_cookie)
 		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
 
 	ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT,
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 0d2ba59..4b927809 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -3315,11 +3315,9 @@
 	qib_6120_config_ctxts(dd);
 	qib_set_ctxtcnt(dd);
 
-	if (qib_wc_pat) {
-		ret = init_chip_wc_pat(dd, 0);
-		if (ret)
-			goto bail;
-	}
+	ret = init_chip_wc_pat(dd, 0);
+	if (ret)
+		goto bail;
 	set_6120_baseaddrs(dd); /* set chip access pointers now */
 
 	ret = 0;
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index 22affda..00b2af2 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -4126,11 +4126,9 @@
 	qib_7220_config_ctxts(dd);
 	qib_set_ctxtcnt(dd);  /* needed for PAT setup */
 
-	if (qib_wc_pat) {
-		ret = init_chip_wc_pat(dd, 0);
-		if (ret)
-			goto bail;
-	}
+	ret = init_chip_wc_pat(dd, 0);
+	if (ret)
+		goto bail;
 	set_7220_baseaddrs(dd); /* set chip access pointers now */
 
 	ret = 0;
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index ef97b71..f32b462 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -6429,6 +6429,7 @@
 	unsigned features, pidx, sbufcnt;
 	int ret, mtu;
 	u32 sbufs, updthresh;
+	resource_size_t vl15off;
 
 	/* pport structs are contiguous, allocated after devdata */
 	ppd = (struct qib_pportdata *)(dd + 1);
@@ -6677,29 +6678,27 @@
 	qib_7322_config_ctxts(dd);
 	qib_set_ctxtcnt(dd);
 
-	if (qib_wc_pat) {
-		resource_size_t vl15off;
-		/*
-		 * We do not set WC on the VL15 buffers to avoid
-		 * a rare problem with unaligned writes from
-		 * interrupt-flushed store buffers, so we need
-		 * to map those separately here.  We can't solve
-		 * this for the rarely used mtrr case.
-		 */
-		ret = init_chip_wc_pat(dd, 0);
-		if (ret)
-			goto bail;
+	/*
+	 * We do not set WC on the VL15 buffers to avoid
+	 * a rare problem with unaligned writes from
+	 * interrupt-flushed store buffers, so we need
+	 * to map those separately here.  We can't solve
+	 * this for the rarely used mtrr case.
+	 */
+	ret = init_chip_wc_pat(dd, 0);
+	if (ret)
+		goto bail;
 
-		/* vl15 buffers start just after the 4k buffers */
-		vl15off = dd->physaddr + (dd->piobufbase >> 32) +
-			dd->piobcnt4k * dd->align4k;
-		dd->piovl15base	= ioremap_nocache(vl15off,
-						  NUM_VL15_BUFS * dd->align4k);
-		if (!dd->piovl15base) {
-			ret = -ENOMEM;
-			goto bail;
-		}
+	/* vl15 buffers start just after the 4k buffers */
+	vl15off = dd->physaddr + (dd->piobufbase >> 32) +
+		  dd->piobcnt4k * dd->align4k;
+	dd->piovl15base	= ioremap_nocache(vl15off,
+					  NUM_VL15_BUFS * dd->align4k);
+	if (!dd->piovl15base) {
+		ret = -ENOMEM;
+		goto bail;
 	}
+
 	qib_7322_set_baseaddrs(dd); /* set chip access pointers now */
 
 	ret = 0;
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index 2ee3695..7e00470 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -91,15 +91,6 @@
 unsigned qib_cc_table_size;
 module_param_named(cc_table_size, qib_cc_table_size, uint, S_IRUGO);
 MODULE_PARM_DESC(cc_table_size, "Congestion control table entries 0 (CCA disabled - default), min = 128, max = 1984");
-/*
- * qib_wc_pat parameter:
- *      0 is WC via MTRR
- *      1 is WC via PAT
- *      If PAT initialization fails, code reverts back to MTRR
- */
-unsigned qib_wc_pat = 1; /* default (1) is to use PAT, not MTRR */
-module_param_named(wc_pat, qib_wc_pat, uint, S_IRUGO);
-MODULE_PARM_DESC(wc_pat, "enable write-combining via PAT mechanism");
 
 static void verify_interrupt(unsigned long);
 
@@ -1377,8 +1368,7 @@
 		spin_unlock(&dd->pport[pidx].cc_shadow_lock);
 	}
 
-	if (!qib_wc_pat)
-		qib_disable_wc(dd);
+	qib_disable_wc(dd);
 
 	if (dd->pioavailregs_dma) {
 		dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
@@ -1547,14 +1537,12 @@
 		goto bail;
 	}
 
-	if (!qib_wc_pat) {
-		ret = qib_enable_wc(dd);
-		if (ret) {
-			qib_dev_err(dd,
-				"Write combining not enabled (err %d): performance may be poor\n",
-				-ret);
-			ret = 0;
-		}
+	ret = qib_enable_wc(dd);
+	if (ret) {
+		qib_dev_err(dd,
+			"Write combining not enabled (err %d): performance may be poor\n",
+			-ret);
+		ret = 0;
 	}
 
 	qib_verify_pioperf(dd);
diff --git a/drivers/infiniband/hw/qib/qib_wc_x86_64.c b/drivers/infiniband/hw/qib/qib_wc_x86_64.c
index 81b225f..6d61ef9 100644
--- a/drivers/infiniband/hw/qib/qib_wc_x86_64.c
+++ b/drivers/infiniband/hw/qib/qib_wc_x86_64.c
@@ -116,21 +116,9 @@
 	}
 
 	if (!ret) {
-		int cookie;
-
-		cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0);
-		if (cookie < 0) {
-			{
-				qib_devinfo(dd->pcidev,
-					 "mtrr_add()  WC for PIO bufs failed (%d)\n",
-					 cookie);
-				ret = -EINVAL;
-			}
-		} else {
-			dd->wc_cookie = cookie;
-			dd->wc_base = (unsigned long) pioaddr;
-			dd->wc_len = (unsigned long) piolen;
-		}
+		dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen);
+		if (dd->wc_cookie < 0)
+			ret = -EINVAL;
 	}
 
 	return ret;
@@ -142,18 +130,7 @@
  */
 void qib_disable_wc(struct qib_devdata *dd)
 {
-	if (dd->wc_cookie) {
-		int r;
-
-		r = mtrr_del(dd->wc_cookie, dd->wc_base,
-			     dd->wc_len);
-		if (r < 0)
-			qib_devinfo(dd->pcidev,
-				 "mtrr_del(%lx, %lx, %lx) failed: %d\n",
-				 dd->wc_cookie, dd->wc_base,
-				 dd->wc_len, r);
-		dd->wc_cookie = 0; /* even on failure */
-	}
+	arch_phys_wc_del(dd->wc_cookie);
 }
 
 /**
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 56959ad..cf32a778 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -386,8 +386,8 @@
 					   rx->rx_ring[i].mapping,
 					   GFP_KERNEL)) {
 			ipoib_warn(priv, "failed to allocate receive buffer %d\n", i);
-				ret = -ENOMEM;
-				goto err_count;
+			ret = -ENOMEM;
+			goto err_count;
 		}
 		ret = ipoib_cm_post_receive_nonsrq(dev, rx, &t->wr, t->sge, i);
 		if (ret) {
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 7b315e3..01999d7 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -82,19 +82,6 @@
 #define NR_GIC_CPU_IF 8
 static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
 
-/*
- * Supported arch specific GIC irq extension.
- * Default make them NULL.
- */
-struct irq_chip gic_arch_extn = {
-	.irq_eoi	= NULL,
-	.irq_mask	= NULL,
-	.irq_unmask	= NULL,
-	.irq_retrigger	= NULL,
-	.irq_set_type	= NULL,
-	.irq_set_wake	= NULL,
-};
-
 #ifndef MAX_GIC_NR
 #define MAX_GIC_NR	1
 #endif
@@ -167,34 +154,16 @@
 
 static void gic_mask_irq(struct irq_data *d)
 {
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&irq_controller_lock, flags);
 	gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR);
-	if (gic_arch_extn.irq_mask)
-		gic_arch_extn.irq_mask(d);
-	raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
 }
 
 static void gic_unmask_irq(struct irq_data *d)
 {
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&irq_controller_lock, flags);
-	if (gic_arch_extn.irq_unmask)
-		gic_arch_extn.irq_unmask(d);
 	gic_poke_irq(d, GIC_DIST_ENABLE_SET);
-	raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
 }
 
 static void gic_eoi_irq(struct irq_data *d)
 {
-	if (gic_arch_extn.irq_eoi) {
-		raw_spin_lock(&irq_controller_lock);
-		gic_arch_extn.irq_eoi(d);
-		raw_spin_unlock(&irq_controller_lock);
-	}
-
 	writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
 }
 
@@ -251,8 +220,6 @@
 {
 	void __iomem *base = gic_dist_base(d);
 	unsigned int gicirq = gic_irq(d);
-	unsigned long flags;
-	int ret;
 
 	/* Interrupt configuration for SGIs can't be changed */
 	if (gicirq < 16)
@@ -263,25 +230,7 @@
 			    type != IRQ_TYPE_EDGE_RISING)
 		return -EINVAL;
 
-	raw_spin_lock_irqsave(&irq_controller_lock, flags);
-
-	if (gic_arch_extn.irq_set_type)
-		gic_arch_extn.irq_set_type(d, type);
-
-	ret = gic_configure_irq(gicirq, type, base, NULL);
-
-	raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
-
-	return ret;
-}
-
-static int gic_retrigger(struct irq_data *d)
-{
-	if (gic_arch_extn.irq_retrigger)
-		return gic_arch_extn.irq_retrigger(d);
-
-	/* the genirq layer expects 0 if we can't retrigger in hardware */
-	return 0;
+	return gic_configure_irq(gicirq, type, base, NULL);
 }
 
 #ifdef CONFIG_SMP
@@ -312,21 +261,6 @@
 }
 #endif
 
-#ifdef CONFIG_PM
-static int gic_set_wake(struct irq_data *d, unsigned int on)
-{
-	int ret = -ENXIO;
-
-	if (gic_arch_extn.irq_set_wake)
-		ret = gic_arch_extn.irq_set_wake(d, on);
-
-	return ret;
-}
-
-#else
-#define gic_set_wake	NULL
-#endif
-
 static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 {
 	u32 irqstat, irqnr;
@@ -385,11 +319,9 @@
 	.irq_unmask		= gic_unmask_irq,
 	.irq_eoi		= gic_eoi_irq,
 	.irq_set_type		= gic_set_type,
-	.irq_retrigger		= gic_retrigger,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= gic_set_affinity,
 #endif
-	.irq_set_wake		= gic_set_wake,
 	.irq_get_irqchip_state	= gic_irq_get_irqchip_state,
 	.irq_set_irqchip_state	= gic_irq_set_irqchip_state,
 };
@@ -1055,7 +987,6 @@
 		set_handle_irq(gic_handle_irq);
 	}
 
-	gic_chip.flags |= gic_arch_extn.flags;
 	gic_dist_init(gic);
 	gic_cpu_init(gic);
 	gic_pm_init(gic);
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 9eeea19..5503e43 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -925,10 +925,11 @@
 
 		switch (r) {
 		/* async */
-		case -EINPROGRESS:
 		case -EBUSY:
 			wait_for_completion(&ctx->restart);
 			reinit_completion(&ctx->restart);
+			/* fall through*/
+		case -EINPROGRESS:
 			ctx->req = NULL;
 			ctx->cc_sector++;
 			continue;
@@ -1345,8 +1346,10 @@
 	struct dm_crypt_io *io = container_of(ctx, struct dm_crypt_io, ctx);
 	struct crypt_config *cc = io->cc;
 
-	if (error == -EINPROGRESS)
+	if (error == -EINPROGRESS) {
+		complete(&ctx->restart);
 		return;
+	}
 
 	if (!error && cc->iv_gen_ops && cc->iv_gen_ops->post)
 		error = cc->iv_gen_ops->post(cc, iv_of_dmreq(cc, dmreq), dmreq);
@@ -1357,15 +1360,12 @@
 	crypt_free_req(cc, req_of_dmreq(cc, dmreq), io->base_bio);
 
 	if (!atomic_dec_and_test(&ctx->cc_pending))
-		goto done;
+		return;
 
 	if (bio_data_dir(io->base_bio) == READ)
 		kcryptd_crypt_read_done(io);
 	else
 		kcryptd_crypt_write_io_submit(io, 1);
-done:
-	if (!completion_done(&ctx->restart))
-		complete(&ctx->restart);
 }
 
 static void kcryptd_crypt(struct work_struct *work)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index d4f31e1..593a024 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4818,12 +4818,12 @@
 	if (mddev->sysfs_state)
 		sysfs_put(mddev->sysfs_state);
 
+	if (mddev->queue)
+		blk_cleanup_queue(mddev->queue);
 	if (mddev->gendisk) {
 		del_gendisk(mddev->gendisk);
 		put_disk(mddev->gendisk);
 	}
-	if (mddev->queue)
-		blk_cleanup_queue(mddev->queue);
 
 	kfree(mddev);
 }
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 9c64b5d..110fd70 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -116,8 +116,8 @@
 		.planar		= false,
 	},
 	{
-		.desc		= "UYVY 4:2:2",
-		.pixelformat	= V4L2_PIX_FMT_UYVY,
+		.desc		= "YVYU 4:2:2",
+		.pixelformat	= V4L2_PIX_FMT_YVYU,
 		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
 		.bpp		= 2,
 		.planar		= false,
@@ -748,7 +748,7 @@
 
 	switch (fmt->pixelformat) {
 	case V4L2_PIX_FMT_YUYV:
-	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_YVYU:
 		widthy = fmt->width * 2;
 		widthuv = 0;
 		break;
@@ -784,15 +784,15 @@
 	case V4L2_PIX_FMT_YUV420:
 	case V4L2_PIX_FMT_YVU420:
 		mcam_reg_write_mask(cam, REG_CTRL0,
-			C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK);
+			C0_DF_YUV | C0_YUV_420PL | C0_YUVE_VYUY, C0_DF_MASK);
 		break;
 	case V4L2_PIX_FMT_YUYV:
 		mcam_reg_write_mask(cam, REG_CTRL0,
-			C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK);
+			C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_NOSWAP, C0_DF_MASK);
 		break;
-	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_YVYU:
 		mcam_reg_write_mask(cam, REG_CTRL0,
-			C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK);
+			C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_SWAP24, C0_DF_MASK);
 		break;
 	case V4L2_PIX_FMT_JPEG:
 		mcam_reg_write_mask(cam, REG_CTRL0,
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index aa0c6ea..7ffdf4d 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -330,10 +330,10 @@
 #define	  C0_YUVE_YVYU	  0x00010000	/* Y1CrY0Cb		*/
 #define	  C0_YUVE_VYUY	  0x00020000	/* CrY1CbY0		*/
 #define	  C0_YUVE_UYVY	  0x00030000	/* CbY1CrY0		*/
-#define	  C0_YUVE_XYUV	  0x00000000	/* 420: .YUV		*/
-#define	  C0_YUVE_XYVU	  0x00010000	/* 420: .YVU		*/
-#define	  C0_YUVE_XUVY	  0x00020000	/* 420: .UVY		*/
-#define	  C0_YUVE_XVUY	  0x00030000	/* 420: .VUY		*/
+#define	  C0_YUVE_NOSWAP  0x00000000	/* no bytes swapping	*/
+#define	  C0_YUVE_SWAP13  0x00010000	/* swap byte 1 and 3	*/
+#define	  C0_YUVE_SWAP24  0x00020000	/* swap byte 2 and 4	*/
+#define	  C0_YUVE_SWAP1324 0x00030000	/* swap bytes 1&3 and 2&4 */
 /* Bayer bits 18,19 if needed */
 #define	  C0_EOF_VSYNC	  0x00400000	/* Generate EOF by VSYNC */
 #define	  C0_VEDGE_CTRL   0x00800000	/* Detect falling edge of VSYNC */
diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c
index 9351f64..6460f8e 100644
--- a/drivers/media/platform/soc_camera/rcar_vin.c
+++ b/drivers/media/platform/soc_camera/rcar_vin.c
@@ -135,6 +135,8 @@
 #define VIN_MAX_WIDTH		2048
 #define VIN_MAX_HEIGHT		2048
 
+#define TIMEOUT_MS		100
+
 enum chip_id {
 	RCAR_GEN2,
 	RCAR_H1,
@@ -820,7 +822,10 @@
 		if (priv->state == STOPPING) {
 			priv->request_to_stop = true;
 			spin_unlock_irq(&priv->lock);
-			wait_for_completion(&priv->capture_stop);
+			if (!wait_for_completion_timeout(
+					&priv->capture_stop,
+					msecs_to_jiffies(TIMEOUT_MS)))
+				priv->state = STOPPED;
 			spin_lock_irq(&priv->lock);
 		}
 	}
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 2c25271..60f7141 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1029,6 +1029,18 @@
 	md->reset_done &= ~type;
 }
 
+int mmc_access_rpmb(struct mmc_queue *mq)
+{
+	struct mmc_blk_data *md = mq->data;
+	/*
+	 * If this is a RPMB partition access, return ture
+	 */
+	if (md && md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+		return true;
+
+	return false;
+}
+
 static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
 {
 	struct mmc_blk_data *md = mq->data;
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 236d194..8efa368 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -38,7 +38,7 @@
 		return BLKPREP_KILL;
 	}
 
-	if (mq && mmc_card_removed(mq->card))
+	if (mq && (mmc_card_removed(mq->card) || mmc_access_rpmb(mq)))
 		return BLKPREP_KILL;
 
 	req->cmd_flags |= REQ_DONTPREP;
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 5752d50..99e6521 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -73,4 +73,6 @@
 extern int mmc_packed_init(struct mmc_queue *, struct mmc_card *);
 extern void mmc_packed_clean(struct mmc_queue *);
 
+extern int mmc_access_rpmb(struct mmc_queue *);
+
 #endif
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index c296bc0..92e767142 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2651,6 +2651,7 @@
 	switch (mode) {
 	case PM_HIBERNATION_PREPARE:
 	case PM_SUSPEND_PREPARE:
+	case PM_RESTORE_PREPARE:
 		spin_lock_irqsave(&host->lock, flags);
 		host->rescan_disable = 1;
 		spin_unlock_irqrestore(&host->lock, flags);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 38b2926..5f5adaf 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -589,9 +589,11 @@
 		host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
 
 		/* Forward link the descriptor list */
-		for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
+		for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) {
 			p->des3 = cpu_to_le32(host->sg_dma +
 					(sizeof(struct idmac_desc) * (i + 1)));
+			p->des1 = 0;
+		}
 
 		/* Set the last descriptor as the end-of-ring descriptor */
 		p->des3 = cpu_to_le32(host->sg_dma);
@@ -1300,7 +1302,8 @@
 	int gpio_cd = mmc_gpio_get_cd(mmc);
 
 	/* Use platform get_cd function, else try onboard card detect */
-	if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
+	if ((brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) ||
+	    (mmc->caps & MMC_CAP_NONREMOVABLE))
 		present = 1;
 	else if (!IS_ERR_VALUE(gpio_cd))
 		present = gpio_cd;
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 2b6ef6b..7eff087 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1408,7 +1408,7 @@
 	host		= mmc_priv(mmc);
 	host->mmc	= mmc;
 	host->addr	= reg;
-	host->timeout	= msecs_to_jiffies(1000);
+	host->timeout	= msecs_to_jiffies(10000);
 	host->ccs_enable = !pd || !pd->ccs_unsupported;
 	host->clk_ctrl2_enable = pd && pd->clk_ctrl2_present;
 
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 89dca77..18ee208 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1110,7 +1110,7 @@
 EXPORT_SYMBOL_GPL(devm_pinctrl_put);
 
 int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps,
-			 bool dup, bool locked)
+			 bool dup)
 {
 	int i, ret;
 	struct pinctrl_maps *maps_node;
@@ -1178,11 +1178,9 @@
 		maps_node->maps = maps;
 	}
 
-	if (!locked)
-		mutex_lock(&pinctrl_maps_mutex);
+	mutex_lock(&pinctrl_maps_mutex);
 	list_add_tail(&maps_node->node, &pinctrl_maps);
-	if (!locked)
-		mutex_unlock(&pinctrl_maps_mutex);
+	mutex_unlock(&pinctrl_maps_mutex);
 
 	return 0;
 }
@@ -1197,7 +1195,7 @@
 int pinctrl_register_mappings(struct pinctrl_map const *maps,
 			      unsigned num_maps)
 {
-	return pinctrl_register_map(maps, num_maps, true, false);
+	return pinctrl_register_map(maps, num_maps, true);
 }
 
 void pinctrl_unregister_map(struct pinctrl_map const *map)
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 75476b3..b24ea84 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -183,7 +183,7 @@
 }
 
 int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps,
-			 bool dup, bool locked);
+			 bool dup);
 void pinctrl_unregister_map(struct pinctrl_map const *map);
 
 extern int pinctrl_force_sleep(struct pinctrl_dev *pctldev);
diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c
index eda13de..0bbf7d7 100644
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -92,7 +92,7 @@
 	dt_map->num_maps = num_maps;
 	list_add_tail(&dt_map->node, &p->dt_maps);
 
-	return pinctrl_register_map(map, num_maps, false, true);
+	return pinctrl_register_map(map, num_maps, false);
 }
 
 struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index 493294c..474812e 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -881,6 +881,8 @@
 	if (!mtk_eint_get_mask(pctl, eint_num)) {
 		mtk_eint_mask(d);
 		unmask = 1;
+	} else {
+		unmask = 0;
 	}
 
 	clr_bit = 0xff << eint_offset;
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-370.c b/drivers/pinctrl/mvebu/pinctrl-armada-370.c
index 42f930f..03aa58c 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-370.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-370.c
@@ -364,7 +364,7 @@
 	   MPP_FUNCTION(0x5, "audio", "mclk"),
 	   MPP_FUNCTION(0x6, "uart0", "cts")),
 	MPP_MODE(63,
-	   MPP_FUNCTION(0x0, "gpo", NULL),
+	   MPP_FUNCTION(0x0, "gpio", NULL),
 	   MPP_FUNCTION(0x1, "spi0", "sck"),
 	   MPP_FUNCTION(0x2, "tclk", NULL)),
 	MPP_MODE(64,
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index b2d2221..ae4115e 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -260,6 +260,7 @@
 			val = 1;
 	}
 
+	val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT;
 	val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
 	val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
 
@@ -417,7 +418,7 @@
 		return ret;
 
 	val = pad->buffer_type << PMIC_GPIO_REG_OUT_TYPE_SHIFT;
-	val = pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT;
+	val |= pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT;
 
 	ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_DIG_OUT_CTL, val);
 	if (ret < 0)
@@ -466,12 +467,13 @@
 		seq_puts(s, " ---");
 	} else {
 
-		if (!pad->input_enabled) {
+		if (pad->input_enabled) {
 			ret = pmic_gpio_read(state, pad, PMIC_MPP_REG_RT_STS);
-			if (!ret) {
-				ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
-				pad->out_value = ret;
-			}
+			if (ret < 0)
+				return;
+
+			ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
+			pad->out_value = ret;
 		}
 
 		seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 8f36c5f..211b942 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -370,6 +370,7 @@
 		}
 	}
 
+	val = val << PMIC_MPP_REG_MODE_DIR_SHIFT;
 	val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
 	val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
 
@@ -576,10 +577,11 @@
 
 		if (pad->input_enabled) {
 			ret = pmic_mpp_read(state, pad, PMIC_MPP_REG_RT_STS);
-			if (!ret) {
-				ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
-				pad->out_value = ret;
-			}
+			if (ret < 0)
+				return;
+
+			ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
+			pad->out_value = ret;
 		}
 
 		seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index b3d419a..b496db8 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -830,6 +830,13 @@
  */
 static const struct dmi_system_id no_hw_rfkill_list[] = {
 	{
+		.ident = "Lenovo G40-30",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G40-30"),
+		},
+	},
+	{
 		.ident = "Lenovo Yoga 2 11 / 13 / Pro",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 7769575..9bb9ad6 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -2115,7 +2115,7 @@
 	return 0;
 }
 
-void static hotkey_mask_warn_incomplete_mask(void)
+static void hotkey_mask_warn_incomplete_mask(void)
 {
 	/* log only what the user can fix... */
 	const u32 wantedmask = hotkey_driver_mask &
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6149ae0..0fe4ad8 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -164,6 +164,16 @@
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ab-b5ze-s3.
 
+config RTC_DRV_ABX80X
+	tristate "Abracon ABx80x"
+	help
+	  If you say yes here you get support for Abracon AB080X and AB180X
+	  families of ultra-low-power  battery- and capacitor-backed real-time
+	  clock chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-abx80x.
+
 config RTC_DRV_AS3722
 	tristate "ams AS3722 RTC driver"
 	depends on MFD_AS3722
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index c31731c..2b82e2b 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -25,6 +25,7 @@
 obj-$(CONFIG_RTC_DRV_AB3100)	+= rtc-ab3100.o
 obj-$(CONFIG_RTC_DRV_AB8500)	+= rtc-ab8500.o
 obj-$(CONFIG_RTC_DRV_ABB5ZES3)	+= rtc-ab-b5ze-s3.o
+obj-$(CONFIG_RTC_DRV_ABX80X)	+= rtc-abx80x.o
 obj-$(CONFIG_RTC_DRV_ARMADA38X)	+= rtc-armada38x.o
 obj-$(CONFIG_RTC_DRV_AS3722)	+= rtc-as3722.o
 obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
new file mode 100644
index 0000000..4337c3b
--- /dev/null
+++ b/drivers/rtc/rtc-abx80x.c
@@ -0,0 +1,307 @@
+/*
+ * A driver for the I2C members of the Abracon AB x8xx RTC family,
+ * and compatible: AB 1805 and AB 0805
+ *
+ * Copyright 2014-2015 Macq S.A.
+ *
+ * Author: Philippe De Muyter <phdm@macqel.be>
+ * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+
+#define ABX8XX_REG_HTH		0x00
+#define ABX8XX_REG_SC		0x01
+#define ABX8XX_REG_MN		0x02
+#define ABX8XX_REG_HR		0x03
+#define ABX8XX_REG_DA		0x04
+#define ABX8XX_REG_MO		0x05
+#define ABX8XX_REG_YR		0x06
+#define ABX8XX_REG_WD		0x07
+
+#define ABX8XX_REG_CTRL1	0x10
+#define ABX8XX_CTRL_WRITE	BIT(1)
+#define ABX8XX_CTRL_12_24	BIT(6)
+
+#define ABX8XX_REG_CFG_KEY	0x1f
+#define ABX8XX_CFG_KEY_MISC	0x9d
+
+#define ABX8XX_REG_ID0		0x28
+
+#define ABX8XX_REG_TRICKLE	0x20
+#define ABX8XX_TRICKLE_CHARGE_ENABLE	0xa0
+#define ABX8XX_TRICKLE_STANDARD_DIODE	0x8
+#define ABX8XX_TRICKLE_SCHOTTKY_DIODE	0x4
+
+static u8 trickle_resistors[] = {0, 3, 6, 11};
+
+enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
+	AB1801, AB1803, AB1804, AB1805, ABX80X};
+
+struct abx80x_cap {
+	u16 pn;
+	bool has_tc;
+};
+
+static struct abx80x_cap abx80x_caps[] = {
+	[AB0801] = {.pn = 0x0801},
+	[AB0803] = {.pn = 0x0803},
+	[AB0804] = {.pn = 0x0804, .has_tc = true},
+	[AB0805] = {.pn = 0x0805, .has_tc = true},
+	[AB1801] = {.pn = 0x1801},
+	[AB1803] = {.pn = 0x1803},
+	[AB1804] = {.pn = 0x1804, .has_tc = true},
+	[AB1805] = {.pn = 0x1805, .has_tc = true},
+	[ABX80X] = {.pn = 0}
+};
+
+static struct i2c_driver abx80x_driver;
+
+static int abx80x_enable_trickle_charger(struct i2c_client *client,
+					 u8 trickle_cfg)
+{
+	int err;
+
+	/*
+	 * Write the configuration key register to enable access to the Trickle
+	 * register
+	 */
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+					ABX8XX_CFG_KEY_MISC);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write configuration key\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE,
+					ABX8XX_TRICKLE_CHARGE_ENABLE |
+					trickle_cfg);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write trickle register\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[8];
+	int err;
+
+	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH,
+					    sizeof(buf), buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to read date\n");
+		return -EIO;
+	}
+
+	tm->tm_sec = bcd2bin(buf[ABX8XX_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(buf[ABX8XX_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[ABX8XX_REG_HR] & 0x3F);
+	tm->tm_wday = buf[ABX8XX_REG_WD] & 0x7;
+	tm->tm_mday = bcd2bin(buf[ABX8XX_REG_DA] & 0x3F);
+	tm->tm_mon = bcd2bin(buf[ABX8XX_REG_MO] & 0x1F) - 1;
+	tm->tm_year = bcd2bin(buf[ABX8XX_REG_YR]) + 100;
+
+	err = rtc_valid_tm(tm);
+	if (err < 0)
+		dev_err(&client->dev, "retrieved date/time is not valid.\n");
+
+	return err;
+}
+
+static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[8];
+	int err;
+
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
+	buf[ABX8XX_REG_HTH] = 0;
+	buf[ABX8XX_REG_SC] = bin2bcd(tm->tm_sec);
+	buf[ABX8XX_REG_MN] = bin2bcd(tm->tm_min);
+	buf[ABX8XX_REG_HR] = bin2bcd(tm->tm_hour);
+	buf[ABX8XX_REG_DA] = bin2bcd(tm->tm_mday);
+	buf[ABX8XX_REG_MO] = bin2bcd(tm->tm_mon + 1);
+	buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100);
+	buf[ABX8XX_REG_WD] = tm->tm_wday;
+
+	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH,
+					     sizeof(buf), buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write to date registers\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static const struct rtc_class_ops abx80x_rtc_ops = {
+	.read_time	= abx80x_rtc_read_time,
+	.set_time	= abx80x_rtc_set_time,
+};
+
+static int abx80x_dt_trickle_cfg(struct device_node *np)
+{
+	const char *diode;
+	int trickle_cfg = 0;
+	int i, ret;
+	u32 tmp;
+
+	ret = of_property_read_string(np, "abracon,tc-diode", &diode);
+	if (ret)
+		return ret;
+
+	if (!strcmp(diode, "standard"))
+		trickle_cfg |= ABX8XX_TRICKLE_STANDARD_DIODE;
+	else if (!strcmp(diode, "schottky"))
+		trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE;
+	else
+		return -EINVAL;
+
+	ret = of_property_read_u32(np, "abracon,tc-resistor", &tmp);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < sizeof(trickle_resistors); i++)
+		if (trickle_resistors[i] == tmp)
+			break;
+
+	if (i == sizeof(trickle_resistors))
+		return -EINVAL;
+
+	return (trickle_cfg | i);
+}
+
+static int abx80x_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node;
+	struct rtc_device *rtc;
+	int i, data, err, trickle_cfg = -EINVAL;
+	char buf[7];
+	unsigned int part = id->driver_data;
+	unsigned int partnumber;
+	unsigned int majrev, minrev;
+	unsigned int lot;
+	unsigned int wafer;
+	unsigned int uid;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ID0,
+					    sizeof(buf), buf);
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to read partnumber\n");
+		return -EIO;
+	}
+
+	partnumber = (buf[0] << 8) | buf[1];
+	majrev = buf[2] >> 3;
+	minrev = buf[2] & 0x7;
+	lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3];
+	uid = ((buf[4] & 0x7f) << 8) | buf[5];
+	wafer = (buf[6] & 0x7c) >> 2;
+	dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
+		 partnumber, majrev, minrev, lot, wafer, uid);
+
+	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL1);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read control register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL1,
+					((data & ~ABX8XX_CTRL_12_24) |
+					 ABX8XX_CTRL_WRITE));
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write control register\n");
+		return -EIO;
+	}
+
+	/* part autodetection */
+	if (part == ABX80X) {
+		for (i = 0; abx80x_caps[i].pn; i++)
+			if (partnumber == abx80x_caps[i].pn)
+				break;
+		if (abx80x_caps[i].pn == 0) {
+			dev_err(&client->dev, "Unknown part: %04x\n",
+				partnumber);
+			return -EINVAL;
+		}
+		part = i;
+	}
+
+	if (partnumber != abx80x_caps[part].pn) {
+		dev_err(&client->dev, "partnumber mismatch %04x != %04x\n",
+			partnumber, abx80x_caps[part].pn);
+		return -EINVAL;
+	}
+
+	if (np && abx80x_caps[part].has_tc)
+		trickle_cfg = abx80x_dt_trickle_cfg(np);
+
+	if (trickle_cfg > 0) {
+		dev_info(&client->dev, "Enabling trickle charger: %02x\n",
+			 trickle_cfg);
+		abx80x_enable_trickle_charger(client, trickle_cfg);
+	}
+
+	rtc = devm_rtc_device_register(&client->dev, abx80x_driver.driver.name,
+				       &abx80x_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	i2c_set_clientdata(client, rtc);
+
+	return 0;
+}
+
+static int abx80x_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static const struct i2c_device_id abx80x_id[] = {
+	{ "abx80x", ABX80X },
+	{ "ab0801", AB0801 },
+	{ "ab0803", AB0803 },
+	{ "ab0804", AB0804 },
+	{ "ab0805", AB0805 },
+	{ "ab1801", AB1801 },
+	{ "ab1803", AB1803 },
+	{ "ab1804", AB1804 },
+	{ "ab1805", AB1805 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, abx80x_id);
+
+static struct i2c_driver abx80x_driver = {
+	.driver		= {
+		.name	= "rtc-abx80x",
+	},
+	.probe		= abx80x_probe,
+	.remove		= abx80x_remove,
+	.id_table	= abx80x_id,
+};
+
+module_i2c_driver(abx80x_driver);
+
+MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Abracon ABX80X RTC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c
index 43e04af..cb70ced 100644
--- a/drivers/rtc/rtc-armada38x.c
+++ b/drivers/rtc/rtc-armada38x.c
@@ -40,6 +40,13 @@
 	void __iomem	    *regs;
 	void __iomem	    *regs_soc;
 	spinlock_t	    lock;
+	/*
+	 * While setting the time, the RTC TIME register should not be
+	 * accessed. Setting the RTC time involves sleeping during
+	 * 100ms, so a mutex instead of a spinlock is used to protect
+	 * it
+	 */
+	struct mutex	    mutex_time;
 	int		    irq;
 };
 
@@ -59,8 +66,7 @@
 	struct armada38x_rtc *rtc = dev_get_drvdata(dev);
 	unsigned long time, time_check, flags;
 
-	spin_lock_irqsave(&rtc->lock, flags);
-
+	mutex_lock(&rtc->mutex_time);
 	time = readl(rtc->regs + RTC_TIME);
 	/*
 	 * WA for failing time set attempts. As stated in HW ERRATA if
@@ -71,7 +77,7 @@
 	if ((time_check - time) > 1)
 		time_check = readl(rtc->regs + RTC_TIME);
 
-	spin_unlock_irqrestore(&rtc->lock, flags);
+	mutex_unlock(&rtc->mutex_time);
 
 	rtc_time_to_tm(time_check, tm);
 
@@ -94,19 +100,12 @@
 	 * then wait for 100ms before writing to the time register to be
 	 * sure that the data will be taken into account.
 	 */
-	spin_lock_irqsave(&rtc->lock, flags);
-
+	mutex_lock(&rtc->mutex_time);
 	rtc_delayed_write(0, rtc, RTC_STATUS);
-
-	spin_unlock_irqrestore(&rtc->lock, flags);
-
 	msleep(100);
-
-	spin_lock_irqsave(&rtc->lock, flags);
-
 	rtc_delayed_write(time, rtc, RTC_TIME);
+	mutex_unlock(&rtc->mutex_time);
 
-	spin_unlock_irqrestore(&rtc->lock, flags);
 out:
 	return ret;
 }
@@ -230,6 +229,7 @@
 		return -ENOMEM;
 
 	spin_lock_init(&rtc->lock);
+	mutex_init(&rtc->mutex_time);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc");
 	rtc->regs = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig
index b78643f..072dac0 100644
--- a/drivers/staging/media/omap4iss/Kconfig
+++ b/drivers/staging/media/omap4iss/Kconfig
@@ -2,6 +2,7 @@
 	bool "OMAP 4 Camera support"
 	depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4
 	depends on HAS_DMA
+	select MFD_SYSCON
 	select VIDEOBUF2_DMA_CONTIG
 	---help---
 	  Driver for an OMAP 4 ISS controller.
diff --git a/drivers/staging/media/omap4iss/iss.c b/drivers/staging/media/omap4iss/iss.c
index e0ad5e5..7ced940 100644
--- a/drivers/staging/media/omap4iss/iss.c
+++ b/drivers/staging/media/omap4iss/iss.c
@@ -17,6 +17,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -1386,6 +1387,16 @@
 
 	platform_set_drvdata(pdev, iss);
 
+	/*
+	 * TODO: When implementing DT support switch to syscon regmap lookup by
+	 * phandle.
+	 */
+	iss->syscon = syscon_regmap_lookup_by_compatible("syscon");
+	if (IS_ERR(iss->syscon)) {
+		ret = PTR_ERR(iss->syscon);
+		goto error;
+	}
+
 	/* Clocks */
 	ret = iss_map_mem_resource(pdev, iss, OMAP4_ISS_MEM_TOP);
 	if (ret < 0)
diff --git a/drivers/staging/media/omap4iss/iss.h b/drivers/staging/media/omap4iss/iss.h
index 734cfee..35df8b4 100644
--- a/drivers/staging/media/omap4iss/iss.h
+++ b/drivers/staging/media/omap4iss/iss.h
@@ -29,6 +29,8 @@
 #include "iss_ipipe.h"
 #include "iss_resizer.h"
 
+struct regmap;
+
 #define to_iss_device(ptr_module)				\
 	container_of(ptr_module, struct iss_device, ptr_module)
 #define to_device(ptr_module)						\
@@ -79,6 +81,7 @@
 
 /*
  * struct iss_device - ISS device structure.
+ * @syscon: Regmap for the syscon register space
  * @crashed: Bitmask of crashed entities (indexed by entity ID)
  */
 struct iss_device {
@@ -93,6 +96,7 @@
 
 	struct resource *res[OMAP4_ISS_MEM_LAST];
 	void __iomem *regs[OMAP4_ISS_MEM_LAST];
+	struct regmap *syscon;
 
 	u64 raw_dmamask;
 
diff --git a/drivers/staging/media/omap4iss/iss_csiphy.c b/drivers/staging/media/omap4iss/iss_csiphy.c
index 7c3d55d..748607f 100644
--- a/drivers/staging/media/omap4iss/iss_csiphy.c
+++ b/drivers/staging/media/omap4iss/iss_csiphy.c
@@ -13,6 +13,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/regmap.h>
 
 #include "../../../../arch/arm/mach-omap2/control.h"
 
@@ -140,9 +141,11 @@
 	 * - bit [18] : CSIPHY1 CTRLCLK enable
 	 * - bit [17:16] : CSIPHY1 config: 00 d-phy, 01/10 ccp2
 	 */
-	cam_rx_ctrl = omap4_ctrl_pad_readl(
-			OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX);
-
+	/*
+	 * TODO: When implementing DT support specify the CONTROL_CAMERA_RX
+	 * register offset in the syscon property instead of hardcoding it.
+	 */
+	regmap_read(iss->syscon, 0x68, &cam_rx_ctrl);
 
 	if (subdevs->interface == ISS_INTERFACE_CSI2A_PHY1) {
 		cam_rx_ctrl &= ~(OMAP4_CAMERARX_CSI21_LANEENABLE_MASK |
@@ -166,8 +169,7 @@
 		cam_rx_ctrl |= OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK;
 	}
 
-	omap4_ctrl_pad_writel(cam_rx_ctrl,
-		 OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX);
+	regmap_write(iss->syscon, 0x68, cam_rx_ctrl);
 
 	/* Reset used lane count */
 	csi2->phy->used_data_lanes = 0;
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index f1e5742..5bab1c6 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -299,11 +299,27 @@
 	return 0;
 }
 
+static void xen_console_update_evtchn(struct xencons_info *info)
+{
+	if (xen_hvm_domain()) {
+		uint64_t v;
+		int err;
+
+		err = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
+		if (!err && v)
+			info->evtchn = v;
+	} else
+		info->evtchn = xen_start_info->console.domU.evtchn;
+}
+
 void xen_console_resume(void)
 {
 	struct xencons_info *info = vtermno_to_xencons(HVC_COOKIE);
-	if (info != NULL && info->irq)
+	if (info != NULL && info->irq) {
+		if (!xen_initial_domain())
+			xen_console_update_evtchn(info);
 		rebind_evtchn_irq(info->evtchn, info->irq);
+	}
 }
 
 static void xencons_disconnect_backend(struct xencons_info *info)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 69fab0f..e9851ad 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -907,8 +907,14 @@
 	mutex_lock(&vdev->igate);
 
 	if (vdev->req_trigger) {
-		dev_dbg(&vdev->pdev->dev, "Requesting device from user\n");
+		if (!(count % 10))
+			dev_notice_ratelimited(&vdev->pdev->dev,
+				"Relaying device request to user (#%u)\n",
+				count);
 		eventfd_signal(vdev->req_trigger, 1);
+	} else if (count == 0) {
+		dev_warn(&vdev->pdev->dev,
+			"No device request channel registered, blocked until released by user\n");
 	}
 
 	mutex_unlock(&vdev->igate);
diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index 0d33662..e1278fe 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -710,6 +710,8 @@
 	void *device_data = device->device_data;
 	struct vfio_unbound_dev *unbound;
 	unsigned int i = 0;
+	long ret;
+	bool interrupted = false;
 
 	/*
 	 * The group exists so long as we have a device reference.  Get
@@ -755,9 +757,22 @@
 
 		vfio_device_put(device);
 
-	} while (wait_event_interruptible_timeout(vfio.release_q,
-						  !vfio_dev_present(group, dev),
-						  HZ * 10) <= 0);
+		if (interrupted) {
+			ret = wait_event_timeout(vfio.release_q,
+					!vfio_dev_present(group, dev), HZ * 10);
+		} else {
+			ret = wait_event_interruptible_timeout(vfio.release_q,
+					!vfio_dev_present(group, dev), HZ * 10);
+			if (ret == -ERESTARTSYS) {
+				interrupted = true;
+				dev_warn(dev,
+					 "Device is currently in use, task"
+					 " \"%s\" (%d) "
+					 "blocked until device is released",
+					 current->comm, task_pid_nr(current));
+			}
+		}
+	} while (ret <= 0);
 
 	vfio_group_put(group);
 
diff --git a/drivers/xen/events/events_2l.c b/drivers/xen/events/events_2l.c
index 5db43fc..7dd4631 100644
--- a/drivers/xen/events/events_2l.c
+++ b/drivers/xen/events/events_2l.c
@@ -345,6 +345,15 @@
 	return IRQ_HANDLED;
 }
 
+static void evtchn_2l_resume(void)
+{
+	int i;
+
+	for_each_online_cpu(i)
+		memset(per_cpu(cpu_evtchn_mask, i), 0, sizeof(xen_ulong_t) *
+				EVTCHN_2L_NR_CHANNELS/BITS_PER_EVTCHN_WORD);
+}
+
 static const struct evtchn_ops evtchn_ops_2l = {
 	.max_channels      = evtchn_2l_max_channels,
 	.nr_channels       = evtchn_2l_max_channels,
@@ -356,6 +365,7 @@
 	.mask              = evtchn_2l_mask,
 	.unmask            = evtchn_2l_unmask,
 	.handle_events     = evtchn_2l_handle_events,
+	.resume	           = evtchn_2l_resume,
 };
 
 void __init xen_evtchn_2l_init(void)
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index 70fba97..2b8553b 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -529,8 +529,8 @@
 	if (rc)
 		goto err;
 
-	bind_evtchn_to_cpu(evtchn, 0);
 	info->evtchn = evtchn;
+	bind_evtchn_to_cpu(evtchn, 0);
 
 	rc = xen_evtchn_port_setup(info);
 	if (rc)
@@ -1279,8 +1279,9 @@
 
 	mutex_unlock(&irq_mapping_update_lock);
 
-	/* new event channels are always bound to cpu 0 */
-	irq_set_affinity(irq, cpumask_of(0));
+        bind_evtchn_to_cpu(evtchn, info->cpu);
+	/* This will be deferred until interrupt is processed */
+	irq_set_affinity(irq, cpumask_of(info->cpu));
 
 	/* Unmask the event channel. */
 	enable_irq(irq);
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index d5bb1a3..8927485 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -327,30 +327,10 @@
 	return err;
 }
 
-struct unmap_grant_pages_callback_data
-{
-	struct completion completion;
-	int result;
-};
-
-static void unmap_grant_callback(int result,
-				 struct gntab_unmap_queue_data *data)
-{
-	struct unmap_grant_pages_callback_data* d = data->data;
-
-	d->result = result;
-	complete(&d->completion);
-}
-
 static int __unmap_grant_pages(struct grant_map *map, int offset, int pages)
 {
 	int i, err = 0;
 	struct gntab_unmap_queue_data unmap_data;
-	struct unmap_grant_pages_callback_data data;
-
-	init_completion(&data.completion);
-	unmap_data.data = &data;
-	unmap_data.done= &unmap_grant_callback;
 
 	if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) {
 		int pgno = (map->notify.addr >> PAGE_SHIFT);
@@ -367,11 +347,9 @@
 	unmap_data.pages = map->pages + offset;
 	unmap_data.count = pages;
 
-	gnttab_unmap_refs_async(&unmap_data);
-
-	wait_for_completion(&data.completion);
-	if (data.result)
-		return data.result;
+	err = gnttab_unmap_refs_sync(&unmap_data);
+	if (err)
+		return err;
 
 	for (i = 0; i < pages; i++) {
 		if (map->unmap_ops[offset+i].status)
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 17972fb..b1c7170 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -123,6 +123,11 @@
 	int (*query_foreign_access)(grant_ref_t ref);
 };
 
+struct unmap_refs_callback_data {
+	struct completion completion;
+	int result;
+};
+
 static struct gnttab_ops *gnttab_interface;
 
 static int grant_table_version;
@@ -863,6 +868,29 @@
 }
 EXPORT_SYMBOL_GPL(gnttab_unmap_refs_async);
 
+static void unmap_refs_callback(int result,
+		struct gntab_unmap_queue_data *data)
+{
+	struct unmap_refs_callback_data *d = data->data;
+
+	d->result = result;
+	complete(&d->completion);
+}
+
+int gnttab_unmap_refs_sync(struct gntab_unmap_queue_data *item)
+{
+	struct unmap_refs_callback_data data;
+
+	init_completion(&data.completion);
+	item->data = &data;
+	item->done = &unmap_refs_callback;
+	gnttab_unmap_refs_async(item);
+	wait_for_completion(&data.completion);
+
+	return data.result;
+}
+EXPORT_SYMBOL_GPL(gnttab_unmap_refs_sync);
+
 static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes)
 {
 	int rc;
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index bf19407..9e6a851 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -131,6 +131,8 @@
 		goto out_resume;
 	}
 
+	xen_arch_suspend();
+
 	si.cancelled = 1;
 
 	err = stop_machine(xen_suspend, &si, cpumask_of(0));
@@ -148,11 +150,12 @@
 		si.cancelled = 1;
 	}
 
+	xen_arch_resume();
+
 out_resume:
-	if (!si.cancelled) {
-		xen_arch_resume();
+	if (!si.cancelled)
 		xs_resume();
-	} else
+	else
 		xs_suspend_cancel();
 
 	dpm_resume_end(si.cancelled ? PMSG_THAW : PMSG_RESTORE);
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 810ad41..4c54932 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -235,7 +235,7 @@
 #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
 #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
 		while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
-			xen_io_tlb_start = (void *)__get_free_pages(__GFP_NOWARN, order);
+			xen_io_tlb_start = (void *)xen_get_swiotlb_free_pages(order);
 			if (xen_io_tlb_start)
 				break;
 			order--;
diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
index 75fe3d4..9c23420 100644
--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -16,8 +16,8 @@
 #include "conf_space.h"
 #include "conf_space_quirks.h"
 
-bool permissive;
-module_param(permissive, bool, 0644);
+bool xen_pcibk_permissive;
+module_param_named(permissive, xen_pcibk_permissive, bool, 0644);
 
 /* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word,
  * xen_pcibk_write_config_word, and xen_pcibk_write_config_byte are created. */
@@ -262,7 +262,7 @@
 		 * This means that some fields may still be read-only because
 		 * they have entries in the config_field list that intercept
 		 * the write and do nothing. */
-		if (dev_data->permissive || permissive) {
+		if (dev_data->permissive || xen_pcibk_permissive) {
 			switch (size) {
 			case 1:
 				err = pci_write_config_byte(dev, offset,
diff --git a/drivers/xen/xen-pciback/conf_space.h b/drivers/xen/xen-pciback/conf_space.h
index 2e1d73d..62461a8 100644
--- a/drivers/xen/xen-pciback/conf_space.h
+++ b/drivers/xen/xen-pciback/conf_space.h
@@ -64,7 +64,7 @@
 	void *data;
 };
 
-extern bool permissive;
+extern bool xen_pcibk_permissive;
 
 #define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset)
 
diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c
index c2260a0..ad3d17d 100644
--- a/drivers/xen/xen-pciback/conf_space_header.c
+++ b/drivers/xen/xen-pciback/conf_space_header.c
@@ -118,7 +118,7 @@
 
 	cmd->val = value;
 
-	if (!permissive && (!dev_data || !dev_data->permissive))
+	if (!xen_pcibk_permissive && (!dev_data || !dev_data->permissive))
 		return 0;
 
 	/* Only allow the guest to control certain bits. */
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index 564b315..5390a67 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -57,6 +57,7 @@
 #include <xen/xen.h>
 #include <xen/xenbus.h>
 #include <xen/events.h>
+#include <xen/xen-ops.h>
 #include <xen/page.h>
 
 #include <xen/hvm.h>
@@ -735,6 +736,30 @@
 	return err;
 }
 
+static int xenbus_resume_cb(struct notifier_block *nb,
+			    unsigned long action, void *data)
+{
+	int err = 0;
+
+	if (xen_hvm_domain()) {
+		uint64_t v;
+
+		err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v);
+		if (!err && v)
+			xen_store_evtchn = v;
+		else
+			pr_warn("Cannot update xenstore event channel: %d\n",
+				err);
+	} else
+		xen_store_evtchn = xen_start_info->store_evtchn;
+
+	return err;
+}
+
+static struct notifier_block xenbus_resume_nb = {
+	.notifier_call = xenbus_resume_cb,
+};
+
 static int __init xenbus_init(void)
 {
 	int err = 0;
@@ -793,6 +818,10 @@
 		goto out_error;
 	}
 
+	if ((xen_store_domain_type != XS_LOCAL) &&
+	    (xen_store_domain_type != XS_UNKNOWN))
+		xen_resume_notifier_register(&xenbus_resume_nb);
+
 #ifdef CONFIG_XEN_COMPAT_XENFS
 	/*
 	 * Create xenfs mountpoint in /proc for compatibility with
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 41c510b..5e020d7 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -86,7 +86,7 @@
 
 	mapping_set_gfp_mask(inode->i_mapping,
 			mapping_gfp_mask(inode->i_mapping) &
-			~(GFP_NOFS & ~__GFP_HIGHMEM));
+			~(__GFP_FS | __GFP_HIGHMEM));
 
 	return inode;
 }
diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c
index da94e41..5373567 100644
--- a/fs/configfs/mount.c
+++ b/fs/configfs/mount.c
@@ -173,5 +173,5 @@
 MODULE_VERSION("0.0.2");
 MODULE_DESCRIPTION("Simple RAM filesystem for user driven kernel subsystem configuration.");
 
-module_init(configfs_init);
+core_initcall(configfs_init);
 module_exit(configfs_exit);
diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c
index 59fedbc..86a2121 100644
--- a/fs/efivarfs/super.c
+++ b/fs/efivarfs/super.c
@@ -121,7 +121,7 @@
 	int len, i;
 	int err = -ENOMEM;
 
-	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry)
 		return err;
 
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index b91b0e1..1e1aae6 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1513,6 +1513,7 @@
 {
 	struct inode *inode = mapping->host;
 	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
+	bool locked = false;
 	int ret;
 	long diff;
 
@@ -1533,7 +1534,13 @@
 
 	diff = nr_pages_to_write(sbi, DATA, wbc);
 
+	if (!S_ISDIR(inode->i_mode)) {
+		mutex_lock(&sbi->writepages);
+		locked = true;
+	}
 	ret = write_cache_pages(mapping, wbc, __f2fs_writepage, mapping);
+	if (locked)
+		mutex_unlock(&sbi->writepages);
 
 	f2fs_submit_merged_bio(sbi, DATA, WRITE);
 
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index d8921cf..8de34ab 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -625,6 +625,7 @@
 	struct mutex cp_mutex;			/* checkpoint procedure lock */
 	struct rw_semaphore cp_rwsem;		/* blocking FS operations */
 	struct rw_semaphore node_write;		/* locking node writes */
+	struct mutex writepages;		/* mutex for writepages() */
 	wait_queue_head_t cp_wait;
 
 	struct inode_management im[MAX_INO_ENTRY];      /* manage inode cache */
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 7e3794e..658e807 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -298,16 +298,14 @@
 
 static void *f2fs_follow_link(struct dentry *dentry, struct nameidata *nd)
 {
-	struct page *page;
+	struct page *page = page_follow_link_light(dentry, nd);
 
-	page = page_follow_link_light(dentry, nd);
-	if (IS_ERR(page))
+	if (IS_ERR_OR_NULL(page))
 		return page;
 
 	/* this is broken symlink case */
 	if (*nd_get_link(nd) == 0) {
-		kunmap(page);
-		page_cache_release(page);
+		page_put_link(dentry, nd, page);
 		return ERR_PTR(-ENOENT);
 	}
 	return page;
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 160b883..b2dd1b0 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1035,6 +1035,7 @@
 	sbi->raw_super = raw_super;
 	sbi->raw_super_buf = raw_super_buf;
 	mutex_init(&sbi->gc_mutex);
+	mutex_init(&sbi->writepages);
 	mutex_init(&sbi->cp_mutex);
 	init_rwsem(&sbi->node_write);
 	clear_sbi_flag(sbi, SBI_POR_DOING);
diff --git a/fs/namei.c b/fs/namei.c
index 4a8d998b..fe30d3b 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1415,6 +1415,7 @@
 	 */
 	if (nd->flags & LOOKUP_RCU) {
 		unsigned seq;
+		bool negative;
 		dentry = __d_lookup_rcu(parent, &nd->last, &seq);
 		if (!dentry)
 			goto unlazy;
@@ -1424,8 +1425,11 @@
 		 * the dentry name information from lookup.
 		 */
 		*inode = dentry->d_inode;
+		negative = d_is_negative(dentry);
 		if (read_seqcount_retry(&dentry->d_seq, seq))
 			return -ECHILD;
+		if (negative)
+			return -ENOENT;
 
 		/*
 		 * This sequence count validates that the parent had no
@@ -1472,6 +1476,10 @@
 		goto need_lookup;
 	}
 
+	if (unlikely(d_is_negative(dentry))) {
+		dput(dentry);
+		return -ENOENT;
+	}
 	path->mnt = mnt;
 	path->dentry = dentry;
 	err = follow_managed(path, nd->flags);
@@ -1583,10 +1591,10 @@
 			goto out_err;
 
 		inode = path->dentry->d_inode;
+		err = -ENOENT;
+		if (d_is_negative(path->dentry))
+			goto out_path_put;
 	}
-	err = -ENOENT;
-	if (d_is_negative(path->dentry))
-		goto out_path_put;
 
 	if (should_follow_link(path->dentry, follow)) {
 		if (nd->flags & LOOKUP_RCU) {
@@ -3036,14 +3044,13 @@
 
 	BUG_ON(nd->flags & LOOKUP_RCU);
 	inode = path->dentry->d_inode;
-finish_lookup:
-	/* we _can_ be in RCU mode here */
 	error = -ENOENT;
 	if (d_is_negative(path->dentry)) {
 		path_to_nameidata(path, nd);
 		goto out;
 	}
-
+finish_lookup:
+	/* we _can_ be in RCU mode here */
 	if (should_follow_link(path->dentry, !symlink_ok)) {
 		if (nd->flags & LOOKUP_RCU) {
 			if (unlikely(nd->path.mnt != path->mnt ||
@@ -3226,7 +3233,7 @@
 
 	if (unlikely(file->f_flags & __O_TMPFILE)) {
 		error = do_tmpfile(dfd, pathname, nd, flags, op, file, &opened);
-		goto out;
+		goto out2;
 	}
 
 	error = path_init(dfd, pathname, flags, nd);
@@ -3256,6 +3263,7 @@
 	}
 out:
 	path_cleanup(nd);
+out2:
 	if (!(opened & FILE_OPENED)) {
 		BUG_ON(!error);
 		put_filp(file);
diff --git a/fs/namespace.c b/fs/namespace.c
index 1f4f9da..1b9e111 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -3179,6 +3179,12 @@
 		if (mnt->mnt.mnt_sb->s_type != type)
 			continue;
 
+		/* This mount is not fully visible if it's root directory
+		 * is not the root directory of the filesystem.
+		 */
+		if (mnt->mnt.mnt_root != mnt->mnt.mnt_sb->s_root)
+			continue;
+
 		/* This mount is not fully visible if there are any child mounts
 		 * that cover anything except for empty directories.
 		 */
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index 059f371..919fd5b 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -388,7 +388,7 @@
 	nchildren = nilfs_btree_node_get_nchildren(node);
 
 	if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN ||
-		     level > NILFS_BTREE_LEVEL_MAX ||
+		     level >= NILFS_BTREE_LEVEL_MAX ||
 		     nchildren < 0 ||
 		     nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) {
 		pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n",
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index a6944b2..fdf4b41 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -757,6 +757,19 @@
 	if (tmpres) {
 		spin_unlock(&dlm->spinlock);
 		spin_lock(&tmpres->spinlock);
+
+		/*
+		 * Right after dlm spinlock was released, dlm_thread could have
+		 * purged the lockres. Check if lockres got unhashed. If so
+		 * start over.
+		 */
+		if (hlist_unhashed(&tmpres->hash_node)) {
+			spin_unlock(&tmpres->spinlock);
+			dlm_lockres_put(tmpres);
+			tmpres = NULL;
+			goto lookup;
+		}
+
 		/* Wait on the thread that is mastering the resource */
 		if (tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN) {
 			__dlm_wait_on_lockres(tmpres);
diff --git a/fs/splice.c b/fs/splice.c
index 476024b..bfe62ae 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1161,7 +1161,7 @@
 	long ret, bytes;
 	umode_t i_mode;
 	size_t len;
-	int i, flags;
+	int i, flags, more;
 
 	/*
 	 * We require the input being a regular file, as we don't want to
@@ -1204,6 +1204,7 @@
 	 * Don't block on output, we have to drain the direct pipe.
 	 */
 	sd->flags &= ~SPLICE_F_NONBLOCK;
+	more = sd->flags & SPLICE_F_MORE;
 
 	while (len) {
 		size_t read_len;
@@ -1217,6 +1218,15 @@
 		sd->total_len = read_len;
 
 		/*
+		 * If more data is pending, set SPLICE_F_MORE
+		 * If this is the last data and SPLICE_F_MORE was not set
+		 * initially, clears it.
+		 */
+		if (read_len < len)
+			sd->flags |= SPLICE_F_MORE;
+		else if (!more)
+			sd->flags &= ~SPLICE_F_MORE;
+		/*
 		 * NOTE: nonblocking mode only applies to the input. We
 		 * must not do the output in nonblocking mode as then we
 		 * could get stuck data in the internal pipe:
diff --git a/include/dt-bindings/mfd/st-lpc.h b/include/dt-bindings/mfd/st-lpc.h
new file mode 100644
index 0000000..e3e6c75
--- /dev/null
+++ b/include/dt-bindings/mfd/st-lpc.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides shared DT/Driver defines for ST's LPC device
+ *
+ * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ */
+
+#ifndef __DT_BINDINGS_ST_LPC_H__
+#define __DT_BINDINGS_ST_LPC_H__
+
+#define ST_LPC_MODE_RTC		0
+#define ST_LPC_MODE_WDT		1
+
+#endif /* __DT_BINDINGS_ST_LPC_H__ */
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index a1b25e3..b7299fe 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -220,7 +220,7 @@
 
 /* This mask is used for both bio and request merge checking */
 #define REQ_NOMERGE_FLAGS \
-	(REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA)
+	(REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_FLUSH_SEQ)
 
 #define REQ_RAHEAD		(1ULL << __REQ_RAHEAD)
 #define REQ_THROTTLED		(1ULL << __REQ_THROTTLED)
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index cdf13ca..371e560 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -9,10 +9,24 @@
 		   + __GNUC_MINOR__ * 100 \
 		   + __GNUC_PATCHLEVEL__)
 
-
 /* Optimization barrier */
+
 /* The "volatile" is due to gcc bugs */
 #define barrier() __asm__ __volatile__("": : :"memory")
+/*
+ * This version is i.e. to prevent dead stores elimination on @ptr
+ * where gcc and llvm may behave differently when otherwise using
+ * normal barrier(): while gcc behavior gets along with a normal
+ * barrier(), llvm needs an explicit input variable to be assumed
+ * clobbered. The issue is as follows: while the inline asm might
+ * access any memory it wants, the compiler could have fit all of
+ * @ptr into memory registers instead, and since @ptr never escaped
+ * from that, it proofed that the inline asm wasn't touching any of
+ * it. This version works well with both compilers, i.e. we're telling
+ * the compiler that the inline asm absolutely may see the contents
+ * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495
+ */
+#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory")
 
 /*
  * This macro obfuscates arithmetic on a variable address so that gcc
diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h
index ba147a1..0c9a2f2 100644
--- a/include/linux/compiler-intel.h
+++ b/include/linux/compiler-intel.h
@@ -13,9 +13,12 @@
 /* Intel ECC compiler doesn't support gcc specific asm stmts.
  * It uses intrinsics to do the equivalent things.
  */
+#undef barrier_data
 #undef RELOC_HIDE
 #undef OPTIMIZER_HIDE_VAR
 
+#define barrier_data(ptr) barrier()
+
 #define RELOC_HIDE(ptr, off)					\
   ({ unsigned long __ptr;					\
      __ptr = (unsigned long) (ptr);				\
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 0e41ca0..8677225 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -169,6 +169,10 @@
 # define barrier() __memory_barrier()
 #endif
 
+#ifndef barrier_data
+# define barrier_data(ptr) barrier()
+#endif
+
 /* Unreachable code */
 #ifndef unreachable
 # define unreachable() do { } while (1)
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 46e83c2..f9ecf63 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -46,7 +46,7 @@
 				 const unsigned char *buf, int len);
 
 const char *ftrace_print_array_seq(struct trace_seq *p,
-				   const void *buf, int buf_len,
+				   const void *buf, int count,
 				   size_t el_size);
 
 struct trace_iterator;
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 36ec4ae..9de976b 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -95,8 +95,6 @@
 
 struct device_node;
 
-extern struct irq_chip gic_arch_extn;
-
 void gic_set_irqchip_flags(unsigned long flags);
 void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
 		    u32 offset, struct device_node *);
diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h
index ff3fea3..9abb763 100644
--- a/include/linux/nilfs2_fs.h
+++ b/include/linux/nilfs2_fs.h
@@ -460,7 +460,7 @@
 /* level */
 #define NILFS_BTREE_LEVEL_DATA          0
 #define NILFS_BTREE_LEVEL_NODE_MIN      (NILFS_BTREE_LEVEL_DATA + 1)
-#define NILFS_BTREE_LEVEL_MAX           14
+#define NILFS_BTREE_LEVEL_MAX           14	/* Max level (exclusive) */
 
 /**
  * struct nilfs_palloc_group_desc - block group descriptor
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 38cff8f..2f7b9a4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2541,10 +2541,6 @@
 
 #define PCI_VENDOR_ID_INTEL		0x8086
 #define PCI_DEVICE_ID_INTEL_EESSC	0x0008
-#define PCI_DEVICE_ID_INTEL_SNB_IMC	0x0100
-#define PCI_DEVICE_ID_INTEL_IVB_IMC	0x0154
-#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC	0x0150
-#define PCI_DEVICE_ID_INTEL_HSW_IMC	0x0c00
 #define PCI_DEVICE_ID_INTEL_PXHD_0	0x0320
 #define PCI_DEVICE_ID_INTEL_PXHD_1	0x0321
 #define PCI_DEVICE_ID_INTEL_PXH_0	0x0329
diff --git a/include/linux/util_macros.h b/include/linux/util_macros.h
index d5f4fb6..f9b2ce5 100644
--- a/include/linux/util_macros.h
+++ b/include/linux/util_macros.h
@@ -5,7 +5,7 @@
 ({									\
 	typeof(as) __fc_i, __fc_as = (as) - 1;				\
 	typeof(x) __fc_x = (x);						\
-	typeof(*a) *__fc_a = (a);					\
+	typeof(*a) const *__fc_a = (a);					\
 	for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) {			\
 		if (__fc_x op DIV_ROUND_CLOSEST(__fc_a[__fc_i] +	\
 						__fc_a[__fc_i + 1], 2))	\
diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h
index ce55906..ac54c27 100644
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -160,7 +160,7 @@
 }
 
 /* Important - sockaddr should be a union of sockaddr_in and sockaddr_in6 */
-static inline int rdma_gid2ip(struct sockaddr *out, union ib_gid *gid)
+static inline void rdma_gid2ip(struct sockaddr *out, union ib_gid *gid)
 {
 	if (ipv6_addr_v4mapped((struct in6_addr *)gid)) {
 		struct sockaddr_in *out_in = (struct sockaddr_in *)out;
@@ -173,7 +173,6 @@
 		out_in->sin6_family = AF_INET6;
 		memcpy(&out_in->sin6_addr.s6_addr, gid->raw, 16);
 	}
-	return 0;
 }
 
 static inline void iboe_addr_get_sgid(struct rdma_dev_addr *dev_addr,
diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h
index 0e3ff30..39ed2d2 100644
--- a/include/rdma/ib_cm.h
+++ b/include/rdma/ib_cm.h
@@ -105,7 +105,8 @@
 	IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216,
 	IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136,
 	IB_CM_SIDR_REP_INFO_LENGTH	 = 72,
-	IB_CM_COMPARE_SIZE		 = 64
+	/* compare done u32 at a time */
+	IB_CM_COMPARE_SIZE		 = (64 / sizeof(u32))
 };
 
 struct ib_cm_id;
@@ -337,8 +338,8 @@
 #define IB_SDP_SERVICE_ID_MASK	cpu_to_be64(0xFFFFFFFFFFFF0000ULL)
 
 struct ib_cm_compare_data {
-	u8  data[IB_CM_COMPARE_SIZE];
-	u8  mask[IB_CM_COMPARE_SIZE];
+	u32  data[IB_CM_COMPARE_SIZE];
+	u32  mask[IB_CM_COMPARE_SIZE];
 };
 
 /**
diff --git a/include/rdma/iw_portmap.h b/include/rdma/iw_portmap.h
index 928b277..fda3167 100644
--- a/include/rdma/iw_portmap.h
+++ b/include/rdma/iw_portmap.h
@@ -148,6 +148,16 @@
 int iwpm_add_and_query_mapping_cb(struct sk_buff *, struct netlink_callback *);
 
 /**
+ * iwpm_remote_info_cb - Process remote connecting peer address info, which
+ *                       the port mapper has received from the connecting peer
+ *
+ * @cb: Contains the received message (payload and netlink header)
+ *
+ * Stores the IPv4/IPv6 address info in a hash table
+ */
+int iwpm_remote_info_cb(struct sk_buff *, struct netlink_callback *);
+
+/**
  * iwpm_mapping_error_cb - Process port mapper notification for error
  *
  * @skb:
@@ -175,6 +185,21 @@
 int iwpm_ack_mapping_info_cb(struct sk_buff *, struct netlink_callback *);
 
 /**
+ * iwpm_get_remote_info - Get the remote connecting peer address info
+ *
+ * @mapped_loc_addr: Mapped local address of the listening peer
+ * @mapped_rem_addr: Mapped remote address of the connecting peer
+ * @remote_addr: To store the remote address of the connecting peer
+ * @nl_client: The index of the netlink client
+ *
+ * The remote address info is retrieved and provided to the client in
+ * the remote_addr. After that it is removed from the hash table
+ */
+int iwpm_get_remote_info(struct sockaddr_storage *mapped_loc_addr,
+			struct sockaddr_storage *mapped_rem_addr,
+			struct sockaddr_storage *remote_addr, u8 nl_client);
+
+/**
  * iwpm_create_mapinfo - Store local and mapped IPv4/IPv6 address
  *                       info in a hash table
  * @local_addr: Local ip/tcp address
diff --git a/include/uapi/rdma/rdma_netlink.h b/include/uapi/rdma/rdma_netlink.h
index de69170..6e4bb42 100644
--- a/include/uapi/rdma/rdma_netlink.h
+++ b/include/uapi/rdma/rdma_netlink.h
@@ -37,6 +37,7 @@
 	RDMA_NL_IWPM_ADD_MAPPING,
 	RDMA_NL_IWPM_QUERY_MAPPING,
 	RDMA_NL_IWPM_REMOVE_MAPPING,
+	RDMA_NL_IWPM_REMOTE_INFO,
 	RDMA_NL_IWPM_HANDLE_ERR,
 	RDMA_NL_IWPM_MAPINFO,
 	RDMA_NL_IWPM_MAPINFO_NUM,
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
index 143ca5f..4478f4b 100644
--- a/include/xen/grant_table.h
+++ b/include/xen/grant_table.h
@@ -191,6 +191,7 @@
 		      struct gnttab_unmap_grant_ref *kunmap_ops,
 		      struct page **pages, unsigned int count);
 void gnttab_unmap_refs_async(struct gntab_unmap_queue_data* item);
+int gnttab_unmap_refs_sync(struct gntab_unmap_queue_data *item);
 
 
 /* Perform a batch of grant map/copy operations. Retry every batch slot
diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h
index c643e6a..0ce4f32 100644
--- a/include/xen/xen-ops.h
+++ b/include/xen/xen-ops.h
@@ -13,6 +13,7 @@
 
 void xen_timer_resume(void);
 void xen_arch_resume(void);
+void xen_arch_suspend(void);
 
 void xen_resume_notifier_register(struct notifier_block *nb);
 void xen_resume_notifier_unregister(struct notifier_block *nb);
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 8369ffa..a95bbdb 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -225,10 +225,11 @@
 #endif
 
 	if (strncmp(name, "/dev/", 5) != 0) {
-		unsigned maj, min;
+		unsigned maj, min, offset;
 		char dummy;
 
-		if (sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2) {
+		if ((sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2) ||
+		    (sscanf(name, "%u:%u:%u:%c", &maj, &min, &offset, &dummy) == 3)) {
 			res = MKDEV(maj, min);
 			if (maj != MAJOR(res) || min != MINOR(res))
 				goto fail;
diff --git a/kernel/irq/dummychip.c b/kernel/irq/dummychip.c
index 988dc58..2feb6fe 100644
--- a/kernel/irq/dummychip.c
+++ b/kernel/irq/dummychip.c
@@ -57,5 +57,6 @@
 	.irq_ack	= noop,
 	.irq_mask	= noop,
 	.irq_unmask	= noop,
+	.flags		= IRQCHIP_SKIP_SET_WAKE,
 };
 EXPORT_SYMBOL_GPL(dummy_irq_chip);
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 233165d..8cf7304 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -162,11 +162,14 @@
 static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
 module_param(kthread_prio, int, 0644);
 
-/* Delay in jiffies for grace-period initialization delays. */
-static int gp_init_delay = IS_ENABLED(CONFIG_RCU_TORTURE_TEST_SLOW_INIT)
-				? CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY
-				: 0;
+/* Delay in jiffies for grace-period initialization delays, debug only. */
+#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT
+static int gp_init_delay = CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY;
 module_param(gp_init_delay, int, 0644);
+#else /* #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */
+static const int gp_init_delay;
+#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */
+#define PER_RCU_NODE_PERIOD 10	/* Number of grace periods between delays. */
 
 /*
  * Track the rcutorture test sequence number and the update version
@@ -1843,9 +1846,8 @@
 		raw_spin_unlock_irq(&rnp->lock);
 		cond_resched_rcu_qs();
 		ACCESS_ONCE(rsp->gp_activity) = jiffies;
-		if (IS_ENABLED(CONFIG_RCU_TORTURE_TEST_SLOW_INIT) &&
-		    gp_init_delay > 0 &&
-		    !(rsp->gpnum % (rcu_num_nodes * 10)))
+		if (gp_init_delay > 0 &&
+		    !(rsp->gpnum % (rcu_num_nodes * PER_RCU_NODE_PERIOD)))
 			schedule_timeout_uninterruptible(gp_init_delay);
 	}
 
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 11dc22a..637a094 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -117,11 +117,7 @@
 	/* Transition with new state-specific callbacks */
 	switch (state) {
 	case CLOCK_EVT_STATE_DETACHED:
-		/*
-		 * This is an internal state, which is guaranteed to go from
-		 * SHUTDOWN to DETACHED. No driver interaction required.
-		 */
-		return 0;
+		/* The clockevent device is getting replaced. Shut it down. */
 
 	case CLOCK_EVT_STATE_SHUTDOWN:
 		return dev->set_state_shutdown(dev);
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 692bf71..25a086b 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -178,12 +178,13 @@
 EXPORT_SYMBOL(ftrace_print_hex_seq);
 
 const char *
-ftrace_print_array_seq(struct trace_seq *p, const void *buf, int buf_len,
+ftrace_print_array_seq(struct trace_seq *p, const void *buf, int count,
 		       size_t el_size)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
 	const char *prefix = "";
 	void *ptr = (void *)buf;
+	size_t buf_len = count * el_size;
 
 	trace_seq_putc(p, '{');
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 1767057..ba2b0c8 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1281,6 +1281,7 @@
 	int "How much to slow down RCU grace-period initialization"
 	range 0 5
 	default 3
+	depends on RCU_TORTURE_TEST_SLOW_INIT
 	help
 	  This option specifies the number of jiffies to wait between
 	  each rcu_node structure initialization.
diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan
index 4fecaedc..777eda7 100644
--- a/lib/Kconfig.kasan
+++ b/lib/Kconfig.kasan
@@ -10,8 +10,11 @@
 	help
 	  Enables kernel address sanitizer - runtime memory debugger,
 	  designed to find out-of-bounds accesses and use-after-free bugs.
-	  This is strictly debugging feature. It consumes about 1/8
-	  of available memory and brings about ~x3 performance slowdown.
+	  This is strictly a debugging feature and it requires a gcc version
+	  of 4.9.2 or later. Detection of out of bounds accesses to stack or
+	  global variables requires gcc 5.0 or later.
+	  This feature consumes about 1/8 of available memory and brings about
+	  ~x3 performance slowdown.
 	  For better error detection enable CONFIG_STACKTRACE,
 	  and add slub_debug=U to boot cmdline.
 
@@ -40,6 +43,7 @@
 	  memory accesses. This is faster than outline (in some workloads
 	  it gives about x2 boost over outline instrumentation), but
 	  make kernel's .text size much bigger.
+	  This requires a gcc version of 5.0 or later.
 
 endchoice
 
diff --git a/lib/find_last_bit.c b/lib/find_last_bit.c
deleted file mode 100644
index 3e3be40..0000000
--- a/lib/find_last_bit.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* find_last_bit.c: fallback find next bit implementation
- *
- * Copyright (C) 2008 IBM Corporation
- * Written by Rusty Russell <rusty@rustcorp.com.au>
- * (Inspired by David Howell's find_next_bit implementation)
- *
- * Rewritten by Yury Norov <yury.norov@gmail.com> to decrease
- * size and improve performance, 2015.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/bitops.h>
-#include <linux/bitmap.h>
-#include <linux/export.h>
-#include <linux/kernel.h>
-
-#ifndef find_last_bit
-
-unsigned long find_last_bit(const unsigned long *addr, unsigned long size)
-{
-	if (size) {
-		unsigned long val = BITMAP_LAST_WORD_MASK(size);
-		unsigned long idx = (size-1) / BITS_PER_LONG;
-
-		do {
-			val &= addr[idx];
-			if (val)
-				return idx * BITS_PER_LONG + __fls(val);
-
-			val = ~0ul;
-		} while (idx--);
-	}
-	return size;
-}
-EXPORT_SYMBOL(find_last_bit);
-
-#endif
diff --git a/lib/string.c b/lib/string.c
index a579201..bb3d4b6 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -607,7 +607,7 @@
 void memzero_explicit(void *s, size_t count)
 {
 	memset(s, 0, count);
-	barrier();
+	barrier_data(s);
 }
 EXPORT_SYMBOL(memzero_explicit);
 
diff --git a/mm/hwpoison-inject.c b/mm/hwpoison-inject.c
index 329caf5..4ca5fe0 100644
--- a/mm/hwpoison-inject.c
+++ b/mm/hwpoison-inject.c
@@ -34,13 +34,13 @@
 	if (!hwpoison_filter_enable)
 		goto inject;
 
-	if (!PageLRU(p) && !PageHuge(p))
-		shake_page(p, 0);
+	if (!PageLRU(hpage) && !PageHuge(p))
+		shake_page(hpage, 0);
 	/*
 	 * This implies unable to support non-LRU pages.
 	 */
-	if (!PageLRU(p) && !PageHuge(p))
-		return 0;
+	if (!PageLRU(hpage) && !PageHuge(p))
+		goto put_out;
 
 	/*
 	 * do a racy check with elevated page count, to make sure PG_hwpoison
@@ -52,11 +52,14 @@
 	err = hwpoison_filter(hpage);
 	unlock_page(hpage);
 	if (err)
-		return 0;
+		goto put_out;
 
 inject:
 	pr_info("Injecting memory failure at pfn %#lx\n", pfn);
 	return memory_failure(pfn, 18, MF_COUNT_INCREASED);
+put_out:
+	put_page(hpage);
+	return 0;
 }
 
 static int hwpoison_unpoison(void *data, u64 val)
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index d9359b7..501820c 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1187,10 +1187,10 @@
 	 * The check (unnecessarily) ignores LRU pages being isolated and
 	 * walked by the page reclaim code, however that's not a big loss.
 	 */
-	if (!PageHuge(p) && !PageTransTail(p)) {
-		if (!PageLRU(p))
-			shake_page(p, 0);
-		if (!PageLRU(p)) {
+	if (!PageHuge(p)) {
+		if (!PageLRU(hpage))
+			shake_page(hpage, 0);
+		if (!PageLRU(hpage)) {
 			/*
 			 * shake_page could have turned it free.
 			 */
@@ -1777,12 +1777,12 @@
 	} else if (ret == 0) { /* for free pages */
 		if (PageHuge(page)) {
 			set_page_hwpoison_huge_page(hpage);
-			dequeue_hwpoisoned_huge_page(hpage);
-			atomic_long_add(1 << compound_order(hpage),
+			if (!dequeue_hwpoisoned_huge_page(hpage))
+				atomic_long_add(1 << compound_order(hpage),
 					&num_poisoned_pages);
 		} else {
-			SetPageHWPoison(page);
-			atomic_long_inc(&num_poisoned_pages);
+			if (!TestSetPageHWPoison(page))
+				atomic_long_inc(&num_poisoned_pages);
 		}
 	}
 	unset_migratetype_isolate(page, MIGRATE_MOVABLE);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 5daf556..eb59f7e 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -580,7 +580,7 @@
 	long x;
 
 	x = div64_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
-		    limit - setpoint + 1);
+		      (limit - setpoint) | 1);
 	pos_ratio = x;
 	pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
 	pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
@@ -807,7 +807,7 @@
 	 * scale global setpoint to bdi's:
 	 *	bdi_setpoint = setpoint * bdi_thresh / thresh
 	 */
-	x = div_u64((u64)bdi_thresh << 16, thresh + 1);
+	x = div_u64((u64)bdi_thresh << 16, thresh | 1);
 	bdi_setpoint = setpoint * (u64)x >> 16;
 	/*
 	 * Use span=(8*write_bw) in single bdi case as indicated by
@@ -822,7 +822,7 @@
 
 	if (bdi_dirty < x_intercept - span / 4) {
 		pos_ratio = div64_u64(pos_ratio * (x_intercept - bdi_dirty),
-				    x_intercept - bdi_setpoint + 1);
+				      (x_intercept - bdi_setpoint) | 1);
 	} else
 		pos_ratio /= 4;
 
diff --git a/tools/lib/api/Makefile b/tools/lib/api/Makefile
index d8fe29f..8bd9606 100644
--- a/tools/lib/api/Makefile
+++ b/tools/lib/api/Makefile
@@ -16,7 +16,7 @@
 LIBFILE = $(OUTPUT)libapi.a
 
 CFLAGS := $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
-CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -D_FORTIFY_SOURCE=2 -fPIC
+CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fPIC
 CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
 
 RM = rm -f
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index e0917c0..29f94f6 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -3865,7 +3865,7 @@
 			} else if (el_size == 4) {
 				trace_seq_printf(s, "%u", *(uint32_t *)num);
 			} else if (el_size == 8) {
-				trace_seq_printf(s, "%lu", *(uint64_t *)num);
+				trace_seq_printf(s, "%"PRIu64, *(uint64_t *)num);
 			} else {
 				trace_seq_printf(s, "BAD SIZE:%d 0x%x",
 						 el_size, *(uint8_t *)num);
diff --git a/tools/perf/bench/futex-requeue.c b/tools/perf/bench/futex-requeue.c
index bedff6b..ad0d9b5 100644
--- a/tools/perf/bench/futex-requeue.c
+++ b/tools/perf/bench/futex-requeue.c
@@ -132,6 +132,9 @@
 	if (!fshared)
 		futex_flag = FUTEX_PRIVATE_FLAG;
 
+	if (nrequeue > nthreads)
+		nrequeue = nthreads;
+
 	printf("Run summary [PID %d]: Requeuing %d threads (from [%s] %p to %p), "
 	       "%d at a time.\n\n",  getpid(), nthreads,
 	       fshared ? "shared":"private", &futex1, &futex2, nrequeue);
@@ -161,20 +164,18 @@
 
 		/* Ok, all threads are patiently blocked, start requeueing */
 		gettimeofday(&start, NULL);
-		for (nrequeued = 0; nrequeued < nthreads; nrequeued += nrequeue) {
+		while (nrequeued < nthreads) {
 			/*
 			 * Do not wakeup any tasks blocked on futex1, allowing
 			 * us to really measure futex_wait functionality.
 			 */
-			futex_cmp_requeue(&futex1, 0, &futex2, 0,
-					  nrequeue, futex_flag);
+			nrequeued += futex_cmp_requeue(&futex1, 0, &futex2, 0,
+						       nrequeue, futex_flag);
 		}
+
 		gettimeofday(&end, NULL);
 		timersub(&end, &start, &runtime);
 
-		if (nrequeued > nthreads)
-			nrequeued = nthreads;
-
 		update_stats(&requeued_stats, nrequeued);
 		update_stats(&requeuetime_stats, runtime.tv_usec);
 
@@ -184,7 +185,7 @@
 		}
 
 		/* everybody should be blocked on futex2, wake'em up */
-		nrequeued = futex_wake(&futex2, nthreads, futex_flag);
+		nrequeued = futex_wake(&futex2, nrequeued, futex_flag);
 		if (nthreads != nrequeued)
 			warnx("couldn't wakeup all tasks (%d/%d)", nrequeued, nthreads);
 
diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c
index ebfa163..ba5efa4 100644
--- a/tools/perf/bench/numa.c
+++ b/tools/perf/bench/numa.c
@@ -180,7 +180,7 @@
 	OPT_INTEGER('H', "thp"		, &p0.thp,		"MADV_NOHUGEPAGE < 0 < MADV_HUGEPAGE"),
 	OPT_BOOLEAN('c', "show_convergence", &p0.show_convergence, "show convergence details"),
 	OPT_BOOLEAN('m', "measure_convergence",	&p0.measure_convergence, "measure convergence latency"),
-	OPT_BOOLEAN('q', "quiet"	, &p0.show_quiet,	"bzero the initial allocations"),
+	OPT_BOOLEAN('q', "quiet"	, &p0.show_quiet,	"quiet mode"),
 	OPT_BOOLEAN('S', "serialize-startup", &p0.serialize_startup,"serialize thread startup"),
 
 	/* Special option string parsing callbacks: */
@@ -828,6 +828,9 @@
 		td = g->threads + task_nr;
 
 		node = numa_node_of_cpu(td->curr_cpu);
+		if (node < 0) /* curr_cpu was likely still -1 */
+			return 0;
+
 		node_present[node] = 1;
 	}
 
@@ -882,6 +885,11 @@
 	for (p = 0; p < g->p.nr_proc; p++) {
 		unsigned int nodes = count_process_nodes(p);
 
+		if (!nodes) {
+			*strong = 0;
+			return;
+		}
+
 		nodes_min = min(nodes, nodes_min);
 		nodes_max = max(nodes, nodes_max);
 	}
@@ -1395,7 +1403,7 @@
 	if (!name)
 		name = "main,";
 
-	if (g->p.show_quiet)
+	if (!g->p.show_quiet)
 		printf(" %-30s %15.3f, %-15s %s\n", name, val, txt_unit, txt_short);
 	else
 		printf(" %14.3f %s\n", val, txt_long);
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 63ea013..1634186 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -319,7 +319,7 @@
 	return 0;
 }
 
-static struct page_stat *search_page_alloc_stat(struct page_stat *stat, bool create)
+static struct page_stat *search_page_alloc_stat(struct page_stat *pstat, bool create)
 {
 	struct rb_node **node = &page_alloc_tree.rb_node;
 	struct rb_node *parent = NULL;
@@ -331,7 +331,7 @@
 		parent = *node;
 		data = rb_entry(*node, struct page_stat, node);
 
-		cmp = page_stat_cmp(data, stat);
+		cmp = page_stat_cmp(data, pstat);
 		if (cmp < 0)
 			node = &parent->rb_left;
 		else if (cmp > 0)
@@ -345,10 +345,10 @@
 
 	data = zalloc(sizeof(*data));
 	if (data != NULL) {
-		data->page = stat->page;
-		data->order = stat->order;
-		data->gfp_flags = stat->gfp_flags;
-		data->migrate_type = stat->migrate_type;
+		data->page = pstat->page;
+		data->order = pstat->order;
+		data->gfp_flags = pstat->gfp_flags;
+		data->migrate_type = pstat->migrate_type;
 
 		rb_link_node(&data->node, parent, node);
 		rb_insert_color(&data->node, &page_alloc_tree);
@@ -375,7 +375,7 @@
 	unsigned int migrate_type = perf_evsel__intval(evsel, sample,
 						       "migratetype");
 	u64 bytes = kmem_page_size << order;
-	struct page_stat *stat;
+	struct page_stat *pstat;
 	struct page_stat this = {
 		.order = order,
 		.gfp_flags = gfp_flags,
@@ -401,21 +401,21 @@
 	 * This is to find the current page (with correct gfp flags and
 	 * migrate type) at free event.
 	 */
-	stat = search_page(page, true);
-	if (stat == NULL)
+	pstat = search_page(page, true);
+	if (pstat == NULL)
 		return -ENOMEM;
 
-	stat->order = order;
-	stat->gfp_flags = gfp_flags;
-	stat->migrate_type = migrate_type;
+	pstat->order = order;
+	pstat->gfp_flags = gfp_flags;
+	pstat->migrate_type = migrate_type;
 
 	this.page = page;
-	stat = search_page_alloc_stat(&this, true);
-	if (stat == NULL)
+	pstat = search_page_alloc_stat(&this, true);
+	if (pstat == NULL)
 		return -ENOMEM;
 
-	stat->nr_alloc++;
-	stat->alloc_bytes += bytes;
+	pstat->nr_alloc++;
+	pstat->alloc_bytes += bytes;
 
 	order_stats[order][migrate_type]++;
 
@@ -428,7 +428,7 @@
 	u64 page;
 	unsigned int order = perf_evsel__intval(evsel, sample, "order");
 	u64 bytes = kmem_page_size << order;
-	struct page_stat *stat;
+	struct page_stat *pstat;
 	struct page_stat this = {
 		.order = order,
 	};
@@ -441,8 +441,8 @@
 	nr_page_frees++;
 	total_page_free_bytes += bytes;
 
-	stat = search_page(page, false);
-	if (stat == NULL) {
+	pstat = search_page(page, false);
+	if (pstat == NULL) {
 		pr_debug2("missing free at page %"PRIx64" (order: %d)\n",
 			  page, order);
 
@@ -453,18 +453,18 @@
 	}
 
 	this.page = page;
-	this.gfp_flags = stat->gfp_flags;
-	this.migrate_type = stat->migrate_type;
+	this.gfp_flags = pstat->gfp_flags;
+	this.migrate_type = pstat->migrate_type;
 
-	rb_erase(&stat->node, &page_tree);
-	free(stat);
+	rb_erase(&pstat->node, &page_tree);
+	free(pstat);
 
-	stat = search_page_alloc_stat(&this, false);
-	if (stat == NULL)
+	pstat = search_page_alloc_stat(&this, false);
+	if (pstat == NULL)
 		return -ENOENT;
 
-	stat->nr_free++;
-	stat->free_bytes += bytes;
+	pstat->nr_free++;
+	pstat->free_bytes += bytes;
 
 	return 0;
 }
@@ -640,9 +640,9 @@
 	       nr_page_frees, total_page_free_bytes / 1024);
 	printf("\n");
 
-	printf("%-30s: %'16lu   [ %'16"PRIu64" KB ]\n", "Total alloc+freed requests",
+	printf("%-30s: %'16"PRIu64"   [ %'16"PRIu64" KB ]\n", "Total alloc+freed requests",
 	       nr_alloc_freed, (total_alloc_freed_bytes) / 1024);
-	printf("%-30s: %'16lu   [ %'16"PRIu64" KB ]\n", "Total alloc-only requests",
+	printf("%-30s: %'16"PRIu64"   [ %'16"PRIu64" KB ]\n", "Total alloc-only requests",
 	       nr_page_allocs - nr_alloc_freed,
 	       (total_page_alloc_bytes - total_alloc_freed_bytes) / 1024);
 	printf("%-30s: %'16lu   [ %'16"PRIu64" KB ]\n", "Total free-only requests",
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 476cdf7..b63aeda 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -329,7 +329,7 @@
 		fprintf(stdout, "\n\n");
 	}
 
-	if (sort_order == default_sort_order &&
+	if (sort_order == NULL &&
 	    parent_pattern == default_parent_pattern) {
 		fprintf(stdout, "#\n# (%s)\n#\n", help);
 
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 1cb3436..6a4d5d4 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -733,7 +733,7 @@
 "Kernel address maps (/proc/{kallsyms,modules}) are restricted.\n\n"
 "Check /proc/sys/kernel/kptr_restrict.\n\n"
 "Kernel%s samples will not be resolved.\n",
-			  !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ?
+			  al.map && !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ?
 			  " modules" : "");
 		if (use_browser <= 0)
 			sleep(5);
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index e124741..e122970 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -2241,10 +2241,11 @@
 	if (err < 0)
 		goto out_error_mmap;
 
+	if (!target__none(&trace->opts.target))
+		perf_evlist__enable(evlist);
+
 	if (forks)
 		perf_evlist__start_workload(evlist);
-	else
-		perf_evlist__enable(evlist);
 
 	trace->multiple_threads = evlist->threads->map[0] == -1 ||
 				  evlist->threads->nr > 1 ||
@@ -2272,6 +2273,11 @@
 
 			if (interrupted)
 				goto out_disable;
+
+			if (done && !draining) {
+				perf_evlist__disable(evlist);
+				draining = true;
+			}
 		}
 	}
 
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index d8bb616..d05b77c 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -1084,6 +1084,8 @@
 	 *
 	 * TODO:Group name support
 	 */
+	if (!arg)
+		return -EINVAL;
 
 	ptr = strpbrk(arg, ";=@+%");
 	if (ptr && *ptr == '=') {	/* Event name */
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index b5bf9d5..2a76e14 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -578,10 +578,12 @@
 	/* Search child die for local variables and parameters. */
 	if (!die_find_variable_at(sc_die, pf->pvar->var, pf->addr, &vr_die)) {
 		/* Search again in global variables */
-		if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die))
+		if (!die_find_variable_at(&pf->cu_die, pf->pvar->var,
+						0, &vr_die)) {
 			pr_warning("Failed to find '%s' in this function.\n",
 				   pf->pvar->var);
 			ret = -ENOENT;
+		}
 	}
 	if (ret >= 0)
 		ret = convert_variable(&vr_die, pf);