CS89x0: Add networking support for QQ2440
QQ2440 is only another non-ISA board using CS89x0. This patch adds the
minimum bits required to make QQ2440 work with CS89x0.
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 925c25c..46e1b1a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1498,7 +1498,7 @@
config CS89x0
tristate "CS89x0 support"
depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || MACH_MX31ADS)
+ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -1512,7 +1512,7 @@
config CS89x0_NONISA_IRQ
def_bool y
depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index e6ac755..537a4b2 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -95,6 +95,9 @@
Dmitry Pervushin : dpervushin@ru.mvista.com
: PNX010X platform support
+ Domenico Andreoli : cavokz@gmail.com
+ : QQ2440 platform support
+
*/
/* Always include 'config.h' first in case the user wants to turn on
@@ -176,6 +179,10 @@
#elif defined(CONFIG_ARCH_IXDP2X01)
static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+#elif defined(CONFIG_MACH_QQ2440)
+#include <mach/qq2440.h>
+static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
+static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
#elif defined(CONFIG_MACH_MX31ADS)
#include <mach/board-mx31ads.h>
static unsigned int netcard_portlist[] __used __initdata = {
@@ -521,6 +528,10 @@
#endif
lp->force = g_cs89x0_media__force;
#endif
+
+#if defined(CONFIG_MACH_QQ2440)
+ lp->force |= FORCE_RJ45 | FORCE_FULL;
+#endif
}
/* Grab the region so we can find another board if autoIRQ fails. */