b43legacy: Clean up beacon IRQ
This patch ports commit c97a4ccc1fad35d3 "b43: Fix beacon BH update" to
b43legacy. It fixes beacon updating in the bottomhalf. In case the device
is busy, we will defer to later in the IRQ handler.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michael Buesch <mb@bu3sch.de>
Tested-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index ad4794a..da59ef0 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -259,7 +259,6 @@
#define B43legacy_IRQ_ALL 0xFFFFFFFF
#define B43legacy_IRQ_MASKTEMPLATE (B43legacy_IRQ_MAC_SUSPENDED | \
- B43legacy_IRQ_BEACON | \
B43legacy_IRQ_TBTT_INDI | \
B43legacy_IRQ_ATIM_END | \
B43legacy_IRQ_PMQ | \
@@ -617,6 +616,7 @@
struct sk_buff *current_beacon;
bool beacon0_uploaded;
bool beacon1_uploaded;
+ bool beacon_templates_virgin; /* Never wrote the templates? */
struct work_struct beacon_update_trigger;
};
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 4f3f016..ee202b4 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -955,23 +955,54 @@
size + sizeof(struct b43legacy_plcp_hdr6));
}
+/* Convert a b43legacy antenna number value to the PHY TX control value. */
+static u16 b43legacy_antenna_to_phyctl(int antenna)
+{
+ switch (antenna) {
+ case B43legacy_ANTENNA0:
+ return B43legacy_TX4_PHY_ANT0;
+ case B43legacy_ANTENNA1:
+ return B43legacy_TX4_PHY_ANT1;
+ }
+ return B43legacy_TX4_PHY_ANTLAST;
+}
+
static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev,
u16 ram_offset,
- u16 shm_size_offset, u8 rate)
+ u16 shm_size_offset)
{
unsigned int i, len, variable_len;
const struct ieee80211_mgmt *bcn;
const u8 *ie;
bool tim_found = 0;
+ unsigned int rate;
+ u16 ctl;
+ int antenna;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
len = min((size_t)dev->wl->current_beacon->len,
0x200 - sizeof(struct b43legacy_plcp_hdr6));
+ rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
b43legacy_write_template_common(dev, (const u8 *)bcn, len, ram_offset,
shm_size_offset, rate);
+ /* Write the PHY TX control parameters. */
+ antenna = B43legacy_ANTENNA_DEFAULT;
+ antenna = b43legacy_antenna_to_phyctl(antenna);
+ ctl = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
+ B43legacy_SHM_SH_BEACPHYCTL);
+ /* We can't send beacons with short preamble. Would get PHY errors. */
+ ctl &= ~B43legacy_TX4_PHY_SHORTPRMBL;
+ ctl &= ~B43legacy_TX4_PHY_ANT;
+ ctl &= ~B43legacy_TX4_PHY_ENC;
+ ctl |= antenna;
+ ctl |= B43legacy_TX4_PHY_ENC_CCK;
+ b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
+ B43legacy_SHM_SH_BEACPHYCTL, ctl);
+
/* Find the position of the TIM and the DTIM_period value
* and write them to SHM. */
ie = bcn->u.beacon.variable;
@@ -1026,7 +1057,7 @@
__le16 dur;
plcp.data = 0;
- b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->bitrate);
+ b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
dur = ieee80211_generic_frame_duration(dev->wl->hw,
dev->wl->vif,
size,
@@ -1130,10 +1161,82 @@
0x200 - sizeof(struct b43legacy_plcp_hdr6));
b43legacy_write_template_common(dev, probe_resp_data,
size, ram_offset,
- shm_size_offset, rate->bitrate);
+ shm_size_offset, rate->hw_value);
kfree(probe_resp_data);
}
+static void b43legacy_upload_beacon0(struct b43legacy_wldev *dev)
+{
+ struct b43legacy_wl *wl = dev->wl;
+
+ if (wl->beacon0_uploaded)
+ return;
+ b43legacy_write_beacon_template(dev, 0x68, 0x18);
+ /* FIXME: Probe resp upload doesn't really belong here,
+ * but we don't use that feature anyway. */
+ b43legacy_write_probe_resp_template(dev, 0x268, 0x4A,
+ &__b43legacy_ratetable[3]);
+ wl->beacon0_uploaded = 1;
+}
+
+static void b43legacy_upload_beacon1(struct b43legacy_wldev *dev)
+{
+ struct b43legacy_wl *wl = dev->wl;
+
+ if (wl->beacon1_uploaded)
+ return;
+ b43legacy_write_beacon_template(dev, 0x468, 0x1A);
+ wl->beacon1_uploaded = 1;
+}
+
+static void handle_irq_beacon(struct b43legacy_wldev *dev)
+{
+ struct b43legacy_wl *wl = dev->wl;
+ u32 cmd, beacon0_valid, beacon1_valid;
+
+ if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
+ return;
+
+ /* This is the bottom half of the asynchronous beacon update. */
+
+ /* Ignore interrupt in the future. */
+ dev->irq_savedstate &= ~B43legacy_IRQ_BEACON;
+
+ cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+ beacon0_valid = (cmd & B43legacy_MACCMD_BEACON0_VALID);
+ beacon1_valid = (cmd & B43legacy_MACCMD_BEACON1_VALID);
+
+ /* Schedule interrupt manually, if busy. */
+ if (beacon0_valid && beacon1_valid) {
+ b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, B43legacy_IRQ_BEACON);
+ dev->irq_savedstate |= B43legacy_IRQ_BEACON;
+ return;
+ }
+
+ if (unlikely(wl->beacon_templates_virgin)) {
+ /* We never uploaded a beacon before.
+ * Upload both templates now, but only mark one valid. */
+ wl->beacon_templates_virgin = 0;
+ b43legacy_upload_beacon0(dev);
+ b43legacy_upload_beacon1(dev);
+ cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+ cmd |= B43legacy_MACCMD_BEACON0_VALID;
+ b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+ } else {
+ if (!beacon0_valid) {
+ b43legacy_upload_beacon0(dev);
+ cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+ cmd |= B43legacy_MACCMD_BEACON0_VALID;
+ b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+ } else if (!beacon1_valid) {
+ b43legacy_upload_beacon1(dev);
+ cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+ cmd |= B43legacy_MACCMD_BEACON1_VALID;
+ b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+ }
+ }
+}
+
static void b43legacy_beacon_update_trigger_work(struct work_struct *work)
{
struct b43legacy_wl *wl = container_of(work, struct b43legacy_wl,
@@ -1143,13 +1246,14 @@
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED))) {
- /* Force the microcode to trigger the
- * beacon update bottom-half IRQ. */
spin_lock_irq(&wl->irq_lock);
- b43legacy_write32(dev, B43legacy_MMIO_MACCMD,
- b43legacy_read32(dev, B43legacy_MMIO_MACCMD)
- | B43legacy_MACCMD_BEACON0_VALID
- | B43legacy_MACCMD_BEACON1_VALID);
+ /* update beacon right away or defer to irq */
+ dev->irq_savedstate = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
+ handle_irq_beacon(dev);
+ /* The handler might have updated the IRQ mask. */
+ b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK,
+ dev->irq_savedstate);
+ mmiowb();
spin_unlock_irq(&wl->irq_lock);
}
mutex_unlock(&wl->mutex);
@@ -1198,45 +1302,6 @@
b43legacydbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
}
-static void handle_irq_beacon(struct b43legacy_wldev *dev)
-{
- struct b43legacy_wl *wl = dev->wl;
- u32 cmd;
- u32 beacon0_valid, beacon1_valid;
-
- if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
- return;
-
- /* This is the bottom half of the asynchronous beacon update. */
-
- cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
- beacon0_valid = (cmd & B43legacy_MACCMD_BEACON0_VALID);
- beacon1_valid = (cmd & B43legacy_MACCMD_BEACON1_VALID);
- cmd &= ~(B43legacy_MACCMD_BEACON0_VALID | B43legacy_MACCMD_BEACON1_VALID);
-
- if (!beacon0_valid) {
- if (!wl->beacon0_uploaded) {
- b43legacy_write_beacon_template(dev, 0x68,
- B43legacy_SHM_SH_BTL0,
- B43legacy_CCK_RATE_1MB);
- b43legacy_write_probe_resp_template(dev, 0x268,
- B43legacy_SHM_SH_PRTLEN,
- &__b43legacy_ratetable[3]);
- wl->beacon0_uploaded = 1;
- }
- cmd |= B43legacy_MACCMD_BEACON0_VALID;
- } else if (!beacon1_valid) {
- if (!wl->beacon1_uploaded) {
- b43legacy_write_beacon_template(dev, 0x468,
- B43legacy_SHM_SH_BTL1,
- B43legacy_CCK_RATE_1MB);
- wl->beacon1_uploaded = 1;
- }
- cmd |= B43legacy_MACCMD_BEACON1_VALID;
- }
- b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
-}
-
static void handle_irq_ucode_debug(struct b43legacy_wldev *dev)
{
}
@@ -3429,6 +3494,9 @@
memset(wl->bssid, 0, ETH_ALEN);
memset(wl->mac_addr, 0, ETH_ALEN);
wl->filter_flags = 0;
+ wl->beacon0_uploaded = 0;
+ wl->beacon1_uploaded = 0;
+ wl->beacon_templates_virgin = 1;
mutex_lock(&wl->mutex);
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 12fca99..b8e39dd 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -274,7 +274,7 @@
/* PHY TX Control word */
if (rate_ofdm)
- phy_ctl |= B43legacy_TX4_PHY_OFDM;
+ phy_ctl |= B43legacy_TX4_PHY_ENC_OFDM;
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
phy_ctl |= B43legacy_TX4_PHY_SHORTPRMBL;
switch (info->antenna_sel_tx) {
diff --git a/drivers/net/wireless/b43legacy/xmit.h b/drivers/net/wireless/b43legacy/xmit.h
index 62e09d0..9163308 100644
--- a/drivers/net/wireless/b43legacy/xmit.h
+++ b/drivers/net/wireless/b43legacy/xmit.h
@@ -67,7 +67,9 @@
#define B43legacy_TX4_EFT_RTSFBOFDM 0x0010 /* RTS/CTS fallback rate type */
/* PHY TX control word */
-#define B43legacy_TX4_PHY_OFDM 0x0001 /* Data frame rate type */
+#define B43legacy_TX4_PHY_ENC 0x0003 /* Data frame encoding */
+#define B43legacy_TX4_PHY_ENC_CCK 0x0000 /* CCK */
+#define B43legacy_TX4_PHY_ENC_OFDM 0x0001 /* Data frame rate type */
#define B43legacy_TX4_PHY_SHORTPRMBL 0x0010 /* Use short preamble */
#define B43legacy_TX4_PHY_ANT 0x03C0 /* Antenna selection */
#define B43legacy_TX4_PHY_ANT0 0x0000 /* Use antenna 0 */