[PATCH] ep93xx_eth: fix RX/TXstatus ring full handling
Ray Lehtiniemi reported that an incoming UDP packet flood can lock up
the ep93xx ethernet driver. Herbert Valerio Riedel noted that due to
the way ep93xx_eth manages the RX/TXstatus rings, it cannot distinguish
a full ring from an empty one, and correctly suggested that this was
likely to be causing this lockup to occur.
Instead of looking at the hardware's RX/TXstatus ring write pointers
to determine when to stop reading from those rings, we should just check
every individual RX/TXstatus descriptor's valid bit instead, since there
is no other way to distinguish an empty ring from a full ring, and if
there is a descriptor waiting, we take the hit of reading the descriptor
from memory anyway.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 127561c..2fc8b2a 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -193,12 +193,9 @@
static int ep93xx_rx(struct net_device *dev, int *budget)
{
struct ep93xx_priv *ep = netdev_priv(dev);
- int tail_offset;
int rx_done;
int processed;
- tail_offset = rdl(ep, REG_RXSTSQCURADD) - ep->descs_dma_addr;
-
rx_done = 0;
processed = 0;
while (*budget > 0) {
@@ -211,28 +208,23 @@
entry = ep->rx_pointer;
rstat = ep->descs->rstat + entry;
- if ((void *)rstat - (void *)ep->descs == tail_offset) {
+
+ rstat0 = rstat->rstat0;
+ rstat1 = rstat->rstat1;
+ if (!(rstat0 & RSTAT0_RFP) || !(rstat1 & RSTAT1_RFP)) {
rx_done = 1;
break;
}
- rstat0 = rstat->rstat0;
- rstat1 = rstat->rstat1;
rstat->rstat0 = 0;
rstat->rstat1 = 0;
- if (!(rstat0 & RSTAT0_RFP))
- printk(KERN_CRIT "ep93xx_rx: buffer not done "
- " %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_EOF))
printk(KERN_CRIT "ep93xx_rx: not end-of-frame "
" %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_EOB))
printk(KERN_CRIT "ep93xx_rx: not end-of-buffer "
" %.8x %.8x\n", rstat0, rstat1);
- if (!(rstat1 & RSTAT1_RFP))
- printk(KERN_CRIT "ep93xx_rx: buffer1 not done "
- " %.8x %.8x\n", rstat0, rstat1);
if ((rstat1 & RSTAT1_BUFFER_INDEX) >> 16 != entry)
printk(KERN_CRIT "ep93xx_rx: entry mismatch "
" %.8x %.8x\n", rstat0, rstat1);
@@ -301,13 +293,8 @@
static int ep93xx_have_more_rx(struct ep93xx_priv *ep)
{
- struct ep93xx_rstat *rstat;
- int tail_offset;
-
- rstat = ep->descs->rstat + ep->rx_pointer;
- tail_offset = rdl(ep, REG_RXSTSQCURADD) - ep->descs_dma_addr;
-
- return !((void *)rstat - (void *)ep->descs == tail_offset);
+ struct ep93xx_rstat *rstat = ep->descs->rstat + ep->rx_pointer;
+ return !!((rstat->rstat0 & RSTAT0_RFP) && (rstat->rstat1 & RSTAT1_RFP));
}
static int ep93xx_poll(struct net_device *dev, int *budget)
@@ -379,10 +366,8 @@
static void ep93xx_tx_complete(struct net_device *dev)
{
struct ep93xx_priv *ep = netdev_priv(dev);
- int tail_offset;
int wake;
- tail_offset = rdl(ep, REG_TXSTSQCURADD) - ep->descs_dma_addr;
wake = 0;
spin_lock(&ep->tx_pending_lock);
@@ -393,15 +378,13 @@
entry = ep->tx_clean_pointer;
tstat = ep->descs->tstat + entry;
- if ((void *)tstat - (void *)ep->descs == tail_offset)
- break;
tstat0 = tstat->tstat0;
+ if (!(tstat0 & TSTAT0_TXFP))
+ break;
+
tstat->tstat0 = 0;
- if (!(tstat0 & TSTAT0_TXFP))
- printk(KERN_CRIT "ep93xx_tx_complete: buffer not done "
- " %.8x\n", tstat0);
if (tstat0 & TSTAT0_FA)
printk(KERN_CRIT "ep93xx_tx_complete: frame aborted "
" %.8x\n", tstat0);