ARM: mx3: dynamically allocate mxc-ehci devices
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 120add4..1573483 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -53,6 +53,7 @@
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
@@ -75,6 +76,7 @@
select SOC_IMX31
select MXC_ULPI if USB_ULPI
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
@@ -109,6 +111,7 @@
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
@@ -120,6 +123,7 @@
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
@@ -142,6 +146,7 @@
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_ESDHC
@@ -155,6 +160,7 @@
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
@@ -169,6 +175,7 @@
select IMX_HAVE_PLATFORM_ESDHC
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for MX35PDK platform. This includes specific
@@ -188,6 +195,7 @@
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_ESDHC
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
index 0cefaca..6571dd79 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -33,6 +33,13 @@
#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata)
#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst;
+#define imx31_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst;
+#define imx31_add_mxc_ehci_hs(id, pdata) \
+ imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
+
extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst;
#define imx31_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index 36561cc..849c48a 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -41,6 +41,13 @@
#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata)
#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst;
+#define imx35_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst;
+#define imx35_add_mxc_ehci_hs(pdata) \
+ imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
+
extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
#define imx35_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 3f859ae..c122c0f 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -95,87 +95,6 @@
},
};
-static struct resource otg_resources[] = {
- {
- .start = MX31_USB_OTG_BASE_ADDR,
- .end = MX31_USB_OTG_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX31_INT_USB_OTG,
- .end = MX31_INT_USB_OTG,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
- .name = "mxc-ehci",
- .id = 0,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- .dma_mask = &otg_dmamask,
- },
- .resource = otg_resources,
- .num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = ~(u32)0;
-
-static struct resource mxc_usbh1_resources[] = {
- {
- .start = MX31_USB_HS1_BASE_ADDR,
- .end = MX31_USB_HS1_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX31_INT_USB_HS1,
- .end = MX31_INT_USB_HS1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh1 = {
- .name = "mxc-ehci",
- .id = 1,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- .dma_mask = &usbh1_dmamask,
- },
- .resource = mxc_usbh1_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-#ifdef CONFIG_ARCH_MX31
-/* USB host 2 */
-static u64 usbh2_dmamask = ~(u32)0;
-
-static struct resource mxc_usbh2_resources[] = {
- {
- .start = MX31_USB_HS2_BASE_ADDR,
- .end = MX31_USB_HS2_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX31_INT_USB_HS2,
- .end = MX31_INT_USB_HS2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh2 = {
- .name = "mxc-ehci",
- .id = 2,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- .dma_mask = &usbh2_dmamask,
- },
- .resource = mxc_usbh2_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-#endif
-
static struct resource imx_wdt_resources[] = {
{
.flags = IORESOURCE_MEM,
@@ -237,14 +156,6 @@
#endif
#if defined(CONFIG_ARCH_MX35)
if (cpu_is_mx35()) {
- otg_resources[0].start = MX35_USB_OTG_BASE_ADDR;
- otg_resources[0].end = MX35_USB_OTG_BASE_ADDR + 0x1ff;
- otg_resources[1].start = MX35_INT_USB_OTG;
- otg_resources[1].end = MX35_INT_USB_OTG;
- mxc_usbh1_resources[0].start = MX35_USB_HS_BASE_ADDR;
- mxc_usbh1_resources[0].end = MX35_USB_HS_BASE_ADDR + 0x1ff;
- mxc_usbh1_resources[1].start = MX35_INT_USB_HS;
- mxc_usbh1_resources[1].end = MX35_INT_USB_HS;
imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index eb3b990..1bc2918 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,9 +1,6 @@
extern struct platform_device mx3_ipu;
extern struct platform_device mx3_fb;
extern struct platform_device mx3_camera;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
extern struct platform_device imx_wdt_device0;
extern struct platform_device imx_rtc_device0;
extern struct platform_device imx_kpp_device;
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index e48072c..28b6f41 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -51,7 +51,6 @@
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -244,13 +243,13 @@
return err;
}
-static struct mxc_usbh_platform_data usbotg_pdata = {
+static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -554,8 +553,8 @@
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &usbotg_pdata);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx31_add_mxc_ehci_otg(&usbotg_pdata);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
}
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index b8b619a..0af1e84 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -42,7 +42,6 @@
#include <mach/common.h>
#include <mach/iomux-mx35.h>
#include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -116,12 +115,12 @@
.flash_bbt = 1,
};
-static struct mxc_usbh_platform_data __maybe_unused otg_pdata = {
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
@@ -167,11 +166,11 @@
imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
if (otg_mode_host)
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx35_add_mxc_ehci_otg(&otg_pdata);
else
imx35_add_fsl_usb2_udc(&otg_device_pdata);
- mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ imx35_add_mxc_ehci_hs(&usbh1_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
eukrea_mbimxsd35_baseboard_init();
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 42f47fa..2c59548 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -42,7 +42,6 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -230,13 +229,13 @@
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.init = usbh1_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
@@ -249,8 +248,8 @@
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh1, &usbh1_pdata);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
}
#else
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index b938958..9e64c66 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -40,7 +40,6 @@
#include <mach/board-mx31lite.h>
#include <mach/iomux-mx3.h>
#include <mach/irqs.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -171,7 +170,7 @@
return 0;
}
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
@@ -258,7 +257,7 @@
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
/* SMSC9117 IRQ pin */
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 5e2ee85..203d21a 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -40,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
-#include <mach/mxc_ehci.h>
#include <mach/mx3_camera.h>
#include <mach/spi.h>
#include <mach/ulpi.h>
@@ -403,17 +402,23 @@
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init moboard_usbh2_init(void)
{
+ struct platform_device *pdev;
+
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
}
#else
static inline int moboard_usbh2_init(void) { return 0; }
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index 6dfdf17..73fb115 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -39,7 +39,6 @@
#include <mach/iomux-mx35.h>
#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
-#include <mach/mxc_ehci.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -127,7 +126,7 @@
};
/* USB HOST config */
-static struct mxc_usbh_platform_data usb_host_pdata = {
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY,
@@ -147,7 +146,7 @@
imx35_add_fsl_usb2_udc(&usb_otg_pdata);
- mxc_register_device(&mxc_usbh1, &usb_host_pdata);
+ imx35_add_mxc_ehci_hs(&usb_host_pdata);
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
imx35_add_esdhc(0, NULL);
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 20f7f94..2d29743 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -44,7 +44,6 @@
#include <mach/ipu.h>
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -538,12 +537,12 @@
};
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
@@ -654,13 +653,13 @@
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx31_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&otg_device_pdata);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 78159f0..f9e7da9 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -38,7 +38,6 @@
#include <mach/iomux-mx35.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <mach/audmux.h>
@@ -310,12 +309,12 @@
};
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
@@ -385,10 +384,10 @@
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx35_add_mxc_ehci_otg(&otg_pdata);
}
- mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ imx35_add_mxc_ehci_hs(&usbh1_pdata);
#endif
if (!otg_mode_host)
imx35_add_fsl_usb2_udc(&otg_device_pdata);
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 331b595..94a0b9e 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -24,7 +24,6 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -185,7 +184,7 @@
return 0;
}
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = devboard_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
@@ -194,6 +193,7 @@
static int __init devboard_usbh1_init(void)
{
struct otg_transceiver *otg;
+ struct platform_device *pdev;
otg = kzalloc(sizeof(*otg), GFP_KERNEL);
if (!otg)
@@ -205,7 +205,11 @@
usbh1_pdata.otg = otg;
- return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index db79f74..a35e8c9 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -28,7 +28,6 @@
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <media/soc_camera.h>
@@ -302,7 +301,7 @@
return 0;
}
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = marxbot_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
@@ -311,6 +310,7 @@
static int __init marxbot_usbh1_init(void)
{
struct otg_transceiver *otg;
+ struct platform_device *pdev;
otg = kzalloc(sizeof(*otg), GFP_KERNEL);
if (!otg)
@@ -322,7 +322,11 @@
usbh1_pdata.otg = otg;
- return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
}
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 68e8ab5..8e989e5 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -27,7 +27,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31moboard.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <media/soc_camera.h>
@@ -125,17 +124,23 @@
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_host_pdata = {
+static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init smartbot_otg_host_init(void)
{
+ struct platform_device *pdev;
+
otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
+ pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
}
#else
static inline int smartbot_otg_host_init(void) { return 0; }