[PATCH] bitops: sparc64: use generic bitops
- remove __{,test_and_}{set,clear,change}_bit() and test_bit()
- remove ffz()
- remove __ffs()
- remove generic_fls()
- remove generic_fls64()
- remove sched_find_first_bit()
- remove ffs()
- unless defined(ULTRA_HAS_POPULATION_COUNT)
- remove generic_hweight{64,32,16,8}()
- remove find_{next,first}{,_zero}_bit()
- remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit()
- remove minix_{test,set,test_and_clear,test,find_first_zero}_bit()
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/include/asm-sparc64/bitops.h b/include/asm-sparc64/bitops.h
index 2361f87..71944b0 100644
--- a/include/asm-sparc64/bitops.h
+++ b/include/asm-sparc64/bitops.h
@@ -18,58 +18,7 @@
extern void clear_bit(unsigned long nr, volatile unsigned long *addr);
extern void change_bit(unsigned long nr, volatile unsigned long *addr);
-/* "non-atomic" versions... */
-
-static inline void __set_bit(int nr, volatile unsigned long *addr)
-{
- unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
-
- *m |= (1UL << (nr & 63));
-}
-
-static inline void __clear_bit(int nr, volatile unsigned long *addr)
-{
- unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
-
- *m &= ~(1UL << (nr & 63));
-}
-
-static inline void __change_bit(int nr, volatile unsigned long *addr)
-{
- unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
-
- *m ^= (1UL << (nr & 63));
-}
-
-static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
-{
- unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
- unsigned long old = *m;
- unsigned long mask = (1UL << (nr & 63));
-
- *m = (old | mask);
- return ((old & mask) != 0);
-}
-
-static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
- unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
- unsigned long old = *m;
- unsigned long mask = (1UL << (nr & 63));
-
- *m = (old & ~mask);
- return ((old & mask) != 0);
-}
-
-static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
-{
- unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
- unsigned long old = *m;
- unsigned long mask = (1UL << (nr & 63));
-
- *m = (old ^ mask);
- return ((old & mask) != 0);
-}
+#include <asm-generic/bitops/non-atomic.h>
#ifdef CONFIG_SMP
#define smp_mb__before_clear_bit() membar_storeload_loadload()
@@ -79,78 +28,15 @@
#define smp_mb__after_clear_bit() barrier()
#endif
-static inline int test_bit(int nr, __const__ volatile unsigned long *addr)
-{
- return (1UL & (addr[nr >> 6] >> (nr & 63))) != 0UL;
-}
-
-/* The easy/cheese version for now. */
-static inline unsigned long ffz(unsigned long word)
-{
- unsigned long result;
-
- result = 0;
- while(word & 1) {
- result++;
- word >>= 1;
- }
- return result;
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
- unsigned long result = 0;
-
- while (!(word & 1UL)) {
- result++;
- word >>= 1;
- }
- return result;
-}
-
-/*
- * fls: find last bit set.
- */
-
-#define fls(x) generic_fls(x)
-#define fls64(x) generic_fls64(x)
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
#ifdef __KERNEL__
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is cleared.
- */
-static inline int sched_find_first_bit(unsigned long *b)
-{
- if (unlikely(b[0]))
- return __ffs(b[0]);
- if (unlikely(((unsigned int)b[1])))
- return __ffs(b[1]) + 64;
- if (b[1] >> 32)
- return __ffs(b[1] >> 32) + 96;
- return __ffs(b[2]) + 128;
-}
-
-/*
- * ffs: find first bit set. This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-static inline int ffs(int x)
-{
- if (!x)
- return 0;
- return __ffs((unsigned long)x) + 1;
-}
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
/*
* hweightN: returns the hamming weight (i.e. the number
@@ -193,102 +79,23 @@
#else
-#define hweight64(x) generic_hweight64(x)
-#define hweight32(x) generic_hweight32(x)
-#define hweight16(x) generic_hweight16(x)
-#define hweight8(x) generic_hweight8(x)
+#include <asm-generic/bitops/hweight.h>
#endif
#endif /* __KERNEL__ */
-/**
- * find_next_bit - find the next set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-extern unsigned long find_next_bit(const unsigned long *, unsigned long,
- unsigned long);
-
-/**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-#define find_first_bit(addr, size) \
- find_next_bit((addr), (size), 0)
-
-/* find_next_zero_bit() finds the first zero bit in a bit string of length
- * 'size' bits, starting the search at bit 'offset'. This is largely based
- * on Linus's ALPHA routines, which are pretty portable BTW.
- */
-
-extern unsigned long find_next_zero_bit(const unsigned long *,
- unsigned long, unsigned long);
-
-#define find_first_zero_bit(addr, size) \
- find_next_zero_bit((addr), (size), 0)
-
-#define test_and_set_le_bit(nr,addr) \
- test_and_set_bit((nr) ^ 0x38, (addr))
-#define test_and_clear_le_bit(nr,addr) \
- test_and_clear_bit((nr) ^ 0x38, (addr))
-
-static inline int test_le_bit(int nr, __const__ unsigned long * addr)
-{
- int mask;
- __const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
-
- ADDR += nr >> 3;
- mask = 1 << (nr & 0x07);
- return ((mask & *ADDR) != 0);
-}
-
-#define find_first_zero_le_bit(addr, size) \
- find_next_zero_le_bit((addr), (size), 0)
-
-extern unsigned long find_next_zero_le_bit(unsigned long *, unsigned long, unsigned long);
+#include <asm-generic/bitops/find.h>
#ifdef __KERNEL__
-#define __set_le_bit(nr, addr) \
- __set_bit((nr) ^ 0x38, (addr))
-#define __clear_le_bit(nr, addr) \
- __clear_bit((nr) ^ 0x38, (addr))
-#define __test_and_clear_le_bit(nr, addr) \
- __test_and_clear_bit((nr) ^ 0x38, (addr))
-#define __test_and_set_le_bit(nr, addr) \
- __test_and_set_bit((nr) ^ 0x38, (addr))
+#include <asm-generic/bitops/ext2-non-atomic.h>
-#define ext2_set_bit(nr,addr) \
- __test_and_set_le_bit((nr),(unsigned long *)(addr))
#define ext2_set_bit_atomic(lock,nr,addr) \
- test_and_set_le_bit((nr),(unsigned long *)(addr))
-#define ext2_clear_bit(nr,addr) \
- __test_and_clear_le_bit((nr),(unsigned long *)(addr))
+ test_and_set_bit((nr) ^ 0x38,(unsigned long *)(addr))
#define ext2_clear_bit_atomic(lock,nr,addr) \
- test_and_clear_le_bit((nr),(unsigned long *)(addr))
-#define ext2_test_bit(nr,addr) \
- test_le_bit((nr),(unsigned long *)(addr))
-#define ext2_find_first_zero_bit(addr, size) \
- find_first_zero_le_bit((unsigned long *)(addr), (size))
-#define ext2_find_next_zero_bit(addr, size, off) \
- find_next_zero_le_bit((unsigned long *)(addr), (size), (off))
+ test_and_clear_bit((nr) ^ 0x38,(unsigned long *)(addr))
-/* Bitmap functions for the minix filesystem. */
-#define minix_test_and_set_bit(nr,addr) \
- __test_and_set_bit((nr),(unsigned long *)(addr))
-#define minix_set_bit(nr,addr) \
- __set_bit((nr),(unsigned long *)(addr))
-#define minix_test_and_clear_bit(nr,addr) \
- __test_and_clear_bit((nr),(unsigned long *)(addr))
-#define minix_test_bit(nr,addr) \
- test_bit((nr),(unsigned long *)(addr))
-#define minix_find_first_zero_bit(addr,size) \
- find_first_zero_bit((unsigned long *)(addr),(size))
+#include <asm-generic/bitops/minix.h>
#endif /* __KERNEL__ */