rt2x00: Factor out RXWI processing to common rt2800 code.
RXWI processing is exactly the same for rt2800pci and rt2800usb, so
make it common code.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index bd56cd1..308842a 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -770,20 +770,11 @@
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct queue_entry_priv_pci *entry_priv = entry->priv_data;
__le32 *rxd = entry_priv->desc;
- __le32 *rxwi = (__le32 *)entry->skb->data;
- u32 rxd3;
- u32 rxwi0;
- u32 rxwi1;
- u32 rxwi2;
- u32 rxwi3;
+ u32 word;
- rt2x00_desc_read(rxd, 3, &rxd3);
- rt2x00_desc_read(rxwi, 0, &rxwi0);
- rt2x00_desc_read(rxwi, 1, &rxwi1);
- rt2x00_desc_read(rxwi, 2, &rxwi2);
- rt2x00_desc_read(rxwi, 3, &rxwi3);
+ rt2x00_desc_read(rxd, 3, &word);
- if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR))
+ if (rt2x00_get_field32(word, RXD_W3_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
/*
@@ -791,10 +782,9 @@
* decryption. This prevents us from correct providing
* correct statistics through debugfs.
*/
- rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
- rxdesc->cipher_status = rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
+ rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W3_CIPHER_ERROR);
- if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) {
+ if (rt2x00_get_field32(word, RXD_W3_DECRYPTED)) {
/*
* Hardware has stripped IV/EIV data from 802.11 frame during
* decryption. Unfortunately the descriptor doesn't contain
@@ -809,47 +799,22 @@
rxdesc->flags |= RX_FLAG_MMIC_ERROR;
}
- if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
+ if (rt2x00_get_field32(word, RXD_W3_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
- if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD))
+ if (rt2x00_get_field32(word, RXD_W3_L2PAD))
rxdesc->dev_flags |= RXDONE_L2PAD;
- if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
- rxdesc->flags |= RX_FLAG_SHORT_GI;
-
- if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
- rxdesc->flags |= RX_FLAG_40MHZ;
-
/*
- * Detect RX rate, always use MCS as signal type.
+ * Process the RXWI structure that is at the start of the buffer.
*/
- rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
- rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
- rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
-
- /*
- * Mask of 0x8 bit to remove the short preamble flag.
- */
- if (rxdesc->rate_mode == RATE_MODE_CCK)
- rxdesc->signal &= ~0x8;
-
- rxdesc->rssi =
- (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
- rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
-
- rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+ rt2800_process_rxwi(entry->skb, rxdesc);
/*
* Set RX IDX in register to inform hardware that we have handled
* this entry and it is available for reuse again.
*/
rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
-
- /*
- * Remove TXWI descriptor from start of buffer.
- */
- skb_pull(entry->skb, RXWI_DESC_SIZE);
}
/*