Merge branch 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen: set up mmu_ops before trying to set any ptes
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index dcbd502..82def88 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -353,10 +353,20 @@
Unit: microWatt
RO
-power[1-*]_average_interval Power use averaging interval
+power[1-*]_average_interval Power use averaging interval. A poll
+ notification is sent to this file if the
+ hardware changes the averaging interval.
Unit: milliseconds
RW
+power[1-*]_average_interval_max Maximum power use averaging interval
+ Unit: milliseconds
+ RO
+
+power[1-*]_average_interval_min Minimum power use averaging interval
+ Unit: milliseconds
+ RO
+
power[1-*]_average_highest Historical average maximum power use
Unit: microWatt
RO
@@ -365,6 +375,18 @@
Unit: microWatt
RO
+power[1-*]_average_max A poll notification is sent to
+ power[1-*]_average when power use
+ rises above this value.
+ Unit: microWatt
+ RW
+
+power[1-*]_average_min A poll notification is sent to
+ power[1-*]_average when power use
+ sinks below this value.
+ Unit: microWatt
+ RW
+
power[1-*]_input Instantaneous power use
Unit: microWatt
RO
@@ -381,6 +403,39 @@
average_highest and average_lowest.
WO
+power[1-*]_accuracy Accuracy of the power meter.
+ Unit: Percent
+ RO
+
+power[1-*]_alarm 1 if the system is drawing more power than the
+ cap allows; 0 otherwise. A poll notification is
+ sent to this file when the power use exceeds the
+ cap. This file only appears if the cap is known
+ to be enforced by hardware.
+ RO
+
+power[1-*]_cap If power use rises above this limit, the
+ system should take action to reduce power use.
+ A poll notification is sent to this file if the
+ cap is changed by the hardware. The *_cap
+ files only appear if the cap is known to be
+ enforced by hardware.
+ Unit: microWatt
+ RW
+
+power[1-*]_cap_hyst Margin of hysteresis built around capping and
+ notification.
+ Unit: microWatt
+ RW
+
+power[1-*]_cap_max Maximum cap that can be set.
+ Unit: microWatt
+ RO
+
+power[1-*]_cap_min Minimum cap that can be set.
+ Unit: microWatt
+ RO
+
**********
* Energy *
**********
diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt
new file mode 100644
index 0000000..3ffadf8
--- /dev/null
+++ b/Documentation/vm/hwpoison.txt
@@ -0,0 +1,136 @@
+What is hwpoison?
+
+Upcoming Intel CPUs have support for recovering from some memory errors
+(``MCA recovery''). This requires the OS to declare a page "poisoned",
+kill the processes associated with it and avoid using it in the future.
+
+This patchkit implements the necessary infrastructure in the VM.
+
+To quote the overview comment:
+
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * This focusses on pages detected as corrupted in the background.
+ * When the current CPU tries to consume corruption the currently
+ * running process can just be killed directly instead. This implies
+ * that if the error cannot be handled for some reason it's safe to
+ * just ignore it because no corruption has been consumed yet. Instead
+ * when that happens another machine check will happen.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * Some of the operations here are somewhat inefficient and have non
+ * linear algorithmic complexity, because the data structures have not
+ * been optimized for this case. This is in particular the case
+ * for the mapping from a vma to a process. Since this case is expected
+ * to be rare we hope we can get away with this.
+
+The code consists of a the high level handler in mm/memory-failure.c,
+a new page poison bit and various checks in the VM to handle poisoned
+pages.
+
+The main target right now is KVM guests, but it works for all kinds
+of applications. KVM support requires a recent qemu-kvm release.
+
+For the KVM use there was need for a new signal type so that
+KVM can inject the machine check into the guest with the proper
+address. This in theory allows other applications to handle
+memory failures too. The expection is that near all applications
+won't do that, but some very specialized ones might.
+
+---
+
+There are two (actually three) modi memory failure recovery can be in:
+
+vm.memory_failure_recovery sysctl set to zero:
+ All memory failures cause a panic. Do not attempt recovery.
+ (on x86 this can be also affected by the tolerant level of the
+ MCE subsystem)
+
+early kill
+ (can be controlled globally and per process)
+ Send SIGBUS to the application as soon as the error is detected
+ This allows applications who can process memory errors in a gentle
+ way (e.g. drop affected object)
+ This is the mode used by KVM qemu.
+
+late kill
+ Send SIGBUS when the application runs into the corrupted page.
+ This is best for memory error unaware applications and default
+ Note some pages are always handled as late kill.
+
+---
+
+User control:
+
+vm.memory_failure_recovery
+ See sysctl.txt
+
+vm.memory_failure_early_kill
+ Enable early kill mode globally
+
+PR_MCE_KILL
+ Set early/late kill mode/revert to system default
+ arg1: PR_MCE_KILL_CLEAR: Revert to system default
+ arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode
+ PR_MCE_KILL_EARLY: Early kill
+ PR_MCE_KILL_LATE: Late kill
+ PR_MCE_KILL_DEFAULT: Use system global default
+PR_MCE_KILL_GET
+ return current mode
+
+
+---
+
+Testing:
+
+madvise(MADV_POISON, ....)
+ (as root)
+ Poison a page in the process for testing
+
+
+hwpoison-inject module through debugfs
+ /sys/debug/hwpoison/corrupt-pfn
+
+Inject hwpoison fault at PFN echoed into this file
+
+
+Architecture specific MCE injector
+
+x86 has mce-inject, mce-test
+
+Some portable hwpoison test programs in mce-test, see blow.
+
+---
+
+References:
+
+http://halobates.de/mce-lc09-2.pdf
+ Overview presentation from LinuxCon 09
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
+ Test suite (hwpoison specific portable tests in tsrc)
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git
+ x86 specific injector
+
+
+---
+
+Limitations:
+
+- Not all page types are supported and never will. Most kernel internal
+objects cannot be recovered, only LRU pages for now.
+- Right now hugepage support is missing.
+
+---
+Andi Kleen, Oct 2009
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 8824115..a1a2ace 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -65,43 +65,51 @@
8. Happy hacking.
- -----------------------------------
+Descriptions of section entries:
-Maintainers List (try to look for most precise areas first)
+ P: Person (obsolete)
+ M: Mail patches to: FullName <address@domain>
+ L: Mailing list that is relevant to this area
+ W: Web-page with status/info
+ T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
+ S: Status, one of the following:
+ Supported: Someone is actually paid to look after this.
+ Maintained: Someone actually looks after it.
+ Odd Fixes: It has a maintainer but they don't have time to do
+ much other than throw the odd patch in. See below..
+ Orphan: No current maintainer [but maybe you could take the
+ role as you write your new code].
+ Obsolete: Old code. Something tagged obsolete generally means
+ it has been replaced by a better system and you
+ should be using that.
+ F: Files and directories with wildcard patterns.
+ A trailing slash includes all files and subdirectory files.
+ F: drivers/net/ all files in and below drivers/net
+ F: drivers/net/* all files in drivers/net, but not below
+ F: */net/* all files in "any top level directory"/net
+ One pattern per line. Multiple F: lines acceptable.
+ X: Files and directories that are NOT maintained, same rules as F:
+ Files exclusions are tested before file matches.
+ Can be useful for excluding a specific subdirectory, for instance:
+ F: net/
+ X: net/ipv6/
+ matches all files in and below net excluding net/ipv6/
+ K: Keyword perl extended regex pattern to match content in a
+ patch or file. For instance:
+ K: of_get_profile
+ matches patches or files that contain "of_get_profile"
+ K: \b(printk|pr_(info|err))\b
+ matches patches or files that contain one or more of the words
+ printk, pr_info or pr_err
+ One regex pattern per line. Multiple K: lines acceptable.
Note: For the hard of thinking, this list is meant to remain in alphabetical
order. If you could add yourselves to it in alphabetical order that would be
so much easier [Ed]
-P: Person (obsolete)
-M: Mail patches to: FullName <address@domain>
-L: Mailing list that is relevant to this area
-W: Web-page with status/info
-T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
-S: Status, one of the following:
+Maintainers List (try to look for most precise areas first)
- Supported: Someone is actually paid to look after this.
- Maintained: Someone actually looks after it.
- Odd Fixes: It has a maintainer but they don't have time to do
- much other than throw the odd patch in. See below..
- Orphan: No current maintainer [but maybe you could take the
- role as you write your new code].
- Obsolete: Old code. Something tagged obsolete generally means
- it has been replaced by a better system and you
- should be using that.
-
-F: Files and directories with wildcard patterns.
- A trailing slash includes all files and subdirectory files.
- F: drivers/net/ all files in and below drivers/net
- F: drivers/net/* all files in drivers/net, but not below
- F: */net/* all files in "any top level directory"/net
- One pattern per line. Multiple F: lines acceptable.
-X: Files and directories that are NOT maintained, same rules as F:
- Files exclusions are tested before file matches.
- Can be useful for excluding a specific subdirectory, for instance:
- F: net/
- X: net/ipv6/
- matches all files in and below net excluding net/ipv6/
+ -----------------------------------
3C505 NETWORK DRIVER
M: Philip Blundell <philb@gnu.org>
@@ -992,7 +1000,7 @@
ATM
M: Chas Williams <chas@cmf.nrl.navy.mil>
-L: linux-atm-general@lists.sourceforge.net (subscribers-only)
+L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
S: Maintained
@@ -1480,6 +1488,7 @@
CORETEMP HARDWARE MONITORING DRIVER
M: Rudolf Marek <r.marek@assembler.cz>
+M: Huaxu Wan <huaxu.wan@intel.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/coretemp
@@ -2151,7 +2160,7 @@
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
-FREESCALE USB PERIPHERIAL DRIVERS
+FREESCALE USB PERIPHERAL DRIVERS
M: Li Yang <leoli@freescale.com>
L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
@@ -2202,18 +2211,6 @@
F: fs/fscache/
F: include/linux/fscache*.h
-TRACING
-M: Steven Rostedt <rostedt@goodmis.org>
-M: Frederic Weisbecker <fweisbec@gmail.com>
-M: Ingo Molnar <mingo@redhat.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
-S: Maintained
-F: Documentation/trace/ftrace.txt
-F: arch/*/*/*/ftrace.h
-F: arch/*/kernel/ftrace.c
-F: include/*/ftrace.h include/trace/ include/linux/trace*.h
-F: kernel/trace/
-
FUJITSU FR-V (FRV) PORT
M: David Howells <dhowells@redhat.com>
S: Maintained
@@ -2272,9 +2269,8 @@
F: include/asm-generic
GENERIC UIO DRIVER FOR PCI DEVICES
-M: Michael S. Tsirkin <mst@redhat.com>
+M: "Michael S. Tsirkin" <mst@redhat.com>
L: kvm@vger.kernel.org
-L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/uio/uio_pci_generic.c
@@ -3004,8 +3000,8 @@
KERNEL JANITORS
L: kernel-janitors@vger.kernel.org
-W: http://www.kerneljanitors.org/
-S: Maintained
+W: http://janitor.kernelnewbies.org/
+S: Odd Fixes
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
M: "J. Bruce Fields" <bfields@fieldses.org>
@@ -3785,7 +3781,7 @@
F: drivers/video/nvidia/
OMAP SUPPORT
-M: "Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
+M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
W: http://www.muru.com/linux/omap/
W: http://linux.omap.com/
@@ -3890,6 +3886,15 @@
F: Documentation/i2c/busses/i2c-ocores
F: drivers/i2c/busses/i2c-ocores.c
+OPEN FIRMWARE AND FLATTENED DEVICE TREE
+M: Grant Likely <grant.likely@secretlab.ca>
+L: devicetree-discuss@lists.ozlabs.org
+W: http://fdt.secretlab.ca
+S: Maintained
+F: drivers/of
+F: include/linux/of*.h
+K: of_get_property
+
OPROFILE
M: Robert Richter <robert.richter@amd.com>
L: oprofile-list@lists.sf.net
@@ -4325,7 +4330,7 @@
RALINK RT2X00 WIRELESS LAN DRIVER
P: rt2x00 project
L: linux-wireless@vger.kernel.org
-L: users@rt2x00.serialmonkey.com
+L: users@rt2x00.serialmonkey.com (moderated for non-subscribers)
W: http://rt2x00.serialmonkey.com/
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
@@ -4534,12 +4539,11 @@
F: include/linux/sched.h
SCORE ARCHITECTURE
-P: Chen Liqin
-M: liqin.chen@sunplusct.com
-P: Lennox Wu
-M: lennox.wu@gmail.com
+M: Chen Liqin <liqin.chen@sunplusct.com>
+M: Lennox Wu <lennox.wu@gmail.com>
W: http://www.sunplusct.com
S: Supported
+F: arch/score/
SCSI CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
@@ -4612,20 +4616,20 @@
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S: Orphan
-L: linux-mmc@vger.kernel.org
-F: drivers/mmc/host/sdhci.*
+S: Orphan
+L: linux-mmc@vger.kernel.org
+F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
M: Anton Vorontsov <avorontsov@ru.mvista.com>
L: linuxppc-dev@ozlabs.org
-L: linux-mmc@vger.kernel.org
+L: linux-mmc@vger.kernel.org
S: Maintained
-F: drivers/mmc/host/sdhci-of.*
+F: drivers/mmc/host/sdhci-of.*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
M: Ben Dooks <ben-linux@fluff.org>
-L: linux-mmc@vger.kernel.org
+L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
@@ -4728,8 +4732,7 @@
F: drivers/usb/host/ohci-lh7a40*
SIMPLE FIRMWARE INTERFACE (SFI)
-P: Len Brown
-M: lenb@kernel.org
+M: Len Brown <lenb@kernel.org>
L: sfi-devel@simplefirmware.org
W: http://simplefirmware.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
@@ -5177,6 +5180,20 @@
S: Maintained
F: drivers/char/tpm/
+TRACING
+M: Steven Rostedt <rostedt@goodmis.org>
+M: Frederic Weisbecker <fweisbec@gmail.com>
+M: Ingo Molnar <mingo@redhat.com>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+S: Maintained
+F: Documentation/trace/ftrace.txt
+F: arch/*/*/*/ftrace.h
+F: arch/*/kernel/ftrace.c
+F: include/*/ftrace.h
+F: include/linux/trace*.h
+F: include/trace/
+F: kernel/trace/
+
TRIVIAL PATCHES
M: Jiri Kosina <trivial@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
@@ -5743,8 +5760,7 @@
F: drivers/scsi/wd7000.c
WINBOND CIR DRIVER
-P: David Härdeman
-M: david@hardeman.nu
+M: David Härdeman <david@hardeman.nu>
S: Maintained
F: drivers/input/misc/winbond-cir.c
@@ -5801,9 +5817,7 @@
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS PMIC DRIVERS
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
-L: linux-kernel@vger.kernel.org
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/node/8
S: Supported
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 8da75de..264f52b 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -304,7 +304,7 @@
CONFIG_ZBOOT_ROM_TEXT=0x10C08000
CONFIG_ZBOOT_ROM_BSS=0x10200000
# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 7d61ae6..953ba02 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -44,11 +44,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
@@ -80,17 +81,15 @@
# CONFIG_AIO is not set
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@@ -133,6 +132,7 @@
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
@@ -147,6 +147,7 @@
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -169,11 +170,13 @@
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_U300=y
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
#
# ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -195,6 +198,7 @@
CONFIG_MACH_U300_DUAL_RAM=y
CONFIG_U300_DEBUG=y
# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
#
# All the settings below must match the bootloader's settings
@@ -207,7 +211,7 @@
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
@@ -222,6 +226,7 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_COMMON_CLKDEV=y
@@ -245,6 +250,8 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
@@ -265,6 +272,7 @@
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -313,6 +321,7 @@
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@@ -351,6 +360,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -391,6 +401,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
@@ -402,9 +413,9 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -453,6 +464,7 @@
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -520,6 +532,7 @@
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -540,12 +553,16 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
@@ -597,6 +614,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
@@ -629,9 +647,6 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -653,16 +668,21 @@
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -690,10 +710,24 @@
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
@@ -792,9 +826,10 @@
#
CONFIG_MMC_ARMMMCI=y
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -820,10 +855,10 @@
#
# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
@@ -863,6 +898,7 @@
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
@@ -878,27 +914,25 @@
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -913,6 +947,7 @@
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
@@ -975,7 +1010,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
@@ -1033,6 +1067,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1066,11 +1101,13 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1121,6 +1158,7 @@
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c3b911e..6aac3f5 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -98,6 +98,9 @@
extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a45ab5d..c2f1605 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -350,7 +350,7 @@
if (tlb_flag(TLB_WB))
dsb();
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+ if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
if (tlb_flag(TLB_V3_FULL))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_U_FULL))
@@ -360,6 +360,7 @@
if (tlb_flag(TLB_V4_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
}
+ put_cpu();
if (tlb_flag(TLB_V6_U_ASID))
asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 322410be..0022b4d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -608,33 +608,33 @@
THUMB( add pc, r8 )
nop
- W(mov) pc, lr @ CP#0
+ movw_pc lr @ CP#0
W(b) do_fpe @ CP#1 (FPE)
W(b) do_fpe @ CP#2 (FPE)
- W(mov) pc, lr @ CP#3
+ movw_pc lr @ CP#3
#ifdef CONFIG_CRUNCH
b crunch_task_enable @ CP#4 (MaverickCrunch)
b crunch_task_enable @ CP#5 (MaverickCrunch)
b crunch_task_enable @ CP#6 (MaverickCrunch)
#else
- W(mov) pc, lr @ CP#4
- W(mov) pc, lr @ CP#5
- W(mov) pc, lr @ CP#6
+ movw_pc lr @ CP#4
+ movw_pc lr @ CP#5
+ movw_pc lr @ CP#6
#endif
- W(mov) pc, lr @ CP#7
- W(mov) pc, lr @ CP#8
- W(mov) pc, lr @ CP#9
+ movw_pc lr @ CP#7
+ movw_pc lr @ CP#8
+ movw_pc lr @ CP#9
#ifdef CONFIG_VFP
W(b) do_vfp @ CP#10 (VFP)
W(b) do_vfp @ CP#11 (VFP)
#else
- W(mov) pc, lr @ CP#10 (VFP)
- W(mov) pc, lr @ CP#11 (VFP)
+ movw_pc lr @ CP#10 (VFP)
+ movw_pc lr @ CP#11 (VFP)
#endif
- W(mov) pc, lr @ CP#12
- W(mov) pc, lr @ CP#13
- W(mov) pc, lr @ CP#14 (Debug)
- W(mov) pc, lr @ CP#15 (Control)
+ movw_pc lr @ CP#12
+ movw_pc lr @ CP#13
+ movw_pc lr @ CP#14 (Debug)
+ movw_pc lr @ CP#15 (Control)
#ifdef CONFIG_NEON
.align 6
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ac34c0d..7e9ed1e 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -110,6 +110,13 @@
mov \rd, sp, lsr #13
mov \rd, \rd, lsl #13
.endm
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ .endm
#else /* CONFIG_THUMB2_KERNEL */
.macro svc_exit, rpsr
clrex @ clear the exclusive monitor
@@ -146,6 +153,14 @@
lsr \rd, \rd, #13
mov \rd, \rd, lsl #13
.endm
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ nop
+ .endm
#endif /* !CONFIG_THUMB2_KERNEL */
/*
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 790fbee..0d96d01 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -328,6 +328,15 @@
}
/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+ elf_core_copy_regs(elfregs, task_pt_regs(t));
+ return 1;
+}
+
+/*
* fill in the fpe structure for a core dump...
*/
int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d581cff..332b784 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -838,7 +838,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9g45_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f95dc16..b4357c3 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -206,7 +206,6 @@
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- desc = irq_desc + gpio_irq;
generic_handle_irq(gpio_irq);
}
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index ca71cf1..a4a7be3 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -112,7 +112,7 @@
ARRAY_SIZE(edb93xxa_i2c_board_info));
} else if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
- ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xx_i2c_board_info,
ARRAY_SIZE(edb93xx_i2c_board_info));
}
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index a3ec33f..469fd96 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -17,7 +17,6 @@
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
/* EP93xx System Controller software locked register write */
void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 4089951..ff5e332 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -638,9 +638,9 @@
_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
- _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
- _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
- _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
@@ -665,7 +665,7 @@
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index ee65dda..906d59b 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -23,6 +23,10 @@
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
#include <mach/iomux.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
+#include <mach/spi.h>
#include "devices.h"
@@ -78,8 +83,6 @@
PC6_PF_I2C2_SCL,
/* SPI1 */
PD25_PF_CSPI1_RDY,
- PD27_PF_CSPI1_SS1,
- PD28_PF_CSPI1_SS0,
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@
}
};
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+ .chipselect = pcm038_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+ {
+ .dev = &mxc_sdhc_device1.dev,
+ .supply = "sdhc_vcc",
+ },
+};
+
+static struct regulator_init_data sdhc1_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+ .consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+ {
+ .dev = NULL,
+ .supply = "imx_cam_vcc",
+ },
+};
+
+static struct regulator_init_data cam_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+ .consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+ {
+ .id = MC13783_REGU_VCAM,
+ .init_data = &cam_data,
+ }, {
+ .id = MC13783_REGU_VMMC1,
+ .init_data = &sdhc1_data,
+ },
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+ .regulators = pcm038_regulators,
+ .num_regulators = ARRAY_SIZE(pcm038_regulators),
+ .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+ MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .irq = IRQ_GPIOB(23),
+ .max_speed_hz = 300000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &pcm038_pmic,
+ .mode = SPI_CS_HIGH,
+ }
+};
+
static void __init pcm038_init(void)
{
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@
/* PE18 for user-LED D40 */
mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+ /* MC13783 IRQ */
+ mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+ mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+ spi_register_board_info(pcm038_spi_board_info,
+ ARRAY_SIZE(pcm038_spi_board_info));
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index c261f59..3cb7f45 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -39,7 +39,6 @@
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
- GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
/* display */
PA5_PF_LSCLK,
PA6_PF_LD0,
@@ -228,6 +227,7 @@
"PCM970");
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+ mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
platform_device_register(&pcm970_sja1000);
}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index eb12de1..63511de 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -1,4 +1,23 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/mx25.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 92aa4fd..d23ae57 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
@@ -23,19 +41,12 @@
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct mxc_nand_platform_data nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
static void __init mx25pdk_init(void)
{
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
- mxc_register_device(&mxc_nand_device, &nand_board_info);
}
-
static void __init mx25pdk_timer_init(void)
{
mx25_clocks_init(26000000);
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index fe5c421..c595260 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -443,7 +443,7 @@
_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
_REGISTER_CLOCK(NULL, "admux", admux_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 06bd618..b2a3bcf 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -530,7 +530,7 @@
_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
_REGISTER_CLOCK(NULL, "epit", epit1_clk)
_REGISTER_CLOCK(NULL, "epit", epit2_clk)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 8a577f3..e6abe18 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -459,7 +459,7 @@
* SPI master controller
* 3 channels
*/
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
{
.start = CSPI1_BASE_ADDR,
.end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@
},
};
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
{
.start = CSPI2_BASE_ADDR,
.end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@
},
};
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
{
.start = CSPI3_BASE_ADDR,
.end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@
},
};
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
.name = "spi_imx",
.id = 0,
- .num_resources = ARRAY_SIZE(imx_spi_0_resources),
- .resource = imx_spi_0_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+ .resource = mxc_spi_0_resources,
};
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
.name = "spi_imx",
.id = 1,
- .num_resources = ARRAY_SIZE(imx_spi_1_resources),
- .resource = imx_spi_1_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+ .resource = mxc_spi_1_resources,
};
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
.name = "spi_imx",
.id = 2,
- .num_resources = ARRAY_SIZE(imx_spi_2_resources),
- .resource = imx_spi_2_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+ .resource = mxc_spi_2_resources,
};
#ifdef CONFIG_ARCH_MX35
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 79f2be4..ab87419 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,7 +20,7 @@
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index ad5a112..bedf5b8 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -81,6 +81,7 @@
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+#ifdef CONFIG_ARCH_MX35
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+#endif
void __init mx31_init_irq(void)
{
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 42920f9..8ad5cc3 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -219,6 +219,10 @@
static void __init ams_delta_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
@@ -231,6 +235,8 @@
omap_usb_init(&ams_delta_usb_config);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+ omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index fb47239..6c8a41f 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -64,6 +64,14 @@
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_usb_init(&generic1510_usb_config);
}
#endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cc2abbb..cd6c395 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -376,6 +376,26 @@
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
+ unsigned char reg;
+
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM1_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM2_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
spi_register_board_info(innovator1510_boardinfo,
ARRAY_SIZE(innovator1510_boardinfo));
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 90dd043..4de2584 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -342,6 +342,14 @@
static void __init omap_palmte_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_board_config = palmte_config;
omap_board_config_size = ARRAY_SIZE(palmte_config);
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8256139..d972cf9 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -289,6 +289,14 @@
static void __init omap_palmtt_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_mpu_wdt_mode(0);
omap_board_config = palmtt_config;
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 81b6bde..986bd4d 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -307,6 +307,14 @@
static void __init
omap_palmz71_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
palmz71_gpio_setup(1);
omap_mpu_wdt_mode(0);
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 02c85ca..056ae64 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -377,6 +377,14 @@
static void __init omap_sx1_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
omap_board_config = sx1_config;
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c06e7a5..07b0752 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -152,6 +152,14 @@
static void __init voiceblue_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
/* Watchdog */
gpio_request(0, "Watchdog");
/* smc91x reset */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d496e50..d23979b 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -131,8 +131,6 @@
}
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- unsigned char reg;
-
switch (i) {
case 0:
uart1_ck = clk_get(NULL, "uart1_ck");
@@ -143,16 +141,6 @@
if (cpu_is_omap15xx())
clk_set_rate(uart1_ck, 12000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART1_TX);
- omap_cfg_reg(UART1_RTS);
- if (machine_is_omap_innovator()) {
- reg = fpga_read(OMAP1510_FPGA_POWER);
- reg |= OMAP1510_FPGA_PCR_COM1_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
- udelay(10);
- }
- }
break;
case 1:
uart2_ck = clk_get(NULL, "uart2_ck");
@@ -165,16 +153,6 @@
else
clk_set_rate(uart2_ck, 48000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART2_TX);
- omap_cfg_reg(UART2_RTS);
- if (machine_is_omap_innovator()) {
- reg = fpga_read(OMAP1510_FPGA_POWER);
- reg |= OMAP1510_FPGA_PCR_COM2_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
- udelay(10);
- }
- }
break;
case 2:
uart3_ck = clk_get(NULL, "uart3_ck");
@@ -185,10 +163,6 @@
if (cpu_is_omap15xx())
clk_set_rate(uart3_ck, 12000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART3_TX);
- omap_cfg_reg(UART3_RX);
- }
break;
}
omap_serial_reset(&serial_platform_data[i]);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 75b1c7e..aad194f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,9 +73,21 @@
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_NOKIA_N800
+ bool
+
+config MACH_NOKIA_N810
+ bool
+
+config MACH_NOKIA_N810_WIMAX
+ bool
+
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on ARCH_OMAP2420
+ select MACH_NOKIA_N800
+ select MACH_NOKIA_N810
+ select MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index efaf053..0acb556 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
@@ -38,7 +39,6 @@
#include <mach/gpmc.h>
#include <mach/control.h>
-#include <mach/keypad.h>
#include <mach/gpmc-smc91x.h>
#include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index eb37c40..609a5a4 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -58,6 +58,8 @@
static void __init omap_4430sdp_init_irq(void)
{
+ omap_board_config = sdp4430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap2_init_common_hw(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@
static void __init omap_4430sdp_init(void)
{
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
- omap_board_config = sdp4430_config;
- omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap_serial_init();
}
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d110a7f..d57ec2f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
@@ -41,7 +42,6 @@
#include <asm/delay.h>
#include <mach/control.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include "mmc-twl4030.h"
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index e4ec0c5..4c4d7f8d 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -20,6 +20,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
@@ -37,7 +38,6 @@
#include <mach/usb.h>
#include <mach/common.h>
#include <mach/mcspi.h>
-#include <mach/keypad.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7f6bf87..5326e0d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -27,6 +27,7 @@
#include <linux/i2c/twl4030.h>
#include <linux/leds.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <asm/mach-types.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/mcspi.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include <mach/mux.h>
#include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 2b0eb1b..e34d96a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
@@ -27,7 +28,6 @@
#include <mach/common.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
-#include <mach/keypad.h>
#include <mach/onenand.h>
#include <mach/gpmc-smc91x.h>
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f9196c3..78869a9 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -26,7 +26,6 @@
#include <mach/mux.h>
#include <mach/board.h>
#include <mach/common.h>
-#include <mach/keypad.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index fd3369d..ea00486 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
#include <linux/regulator/machine.h>
@@ -22,7 +23,6 @@
#include <mach/common.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include "mmc-twl4030.h"
#include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e3a3bad..56be87d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -302,7 +302,9 @@
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
+#endif
omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
omap_hwmod_late_init();
omap_pm_if_init();
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 378c2f6..8946319 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -639,14 +639,15 @@
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- /* Enable GPIO wakeups in PER */
+ /* Enable wakeups in PER */
prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+ OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_GRPSEL_GPIO6,
+ OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index ae21868..54dfeb5 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -109,16 +109,6 @@
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
-#ifdef CONFIG_ARCH_OMAP4
- .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
- .mapbase = OMAP_UART4_BASE,
- .irq = 70,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = OMAP24XX_BASE_BAUD * 16,
- }, {
-#endif
.flags = 0
}
};
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index aac2cda..102916f 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -43,10 +43,10 @@
#define CM_X300_ETH_PHYS 0x08000010
-#define GPIO82_MMC2_IRQ (82)
-#define GPIO85_MMC2_WP (85)
+#define GPIO82_MMC_IRQ (82)
+#define GPIO85_MMC_WP (85)
-#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ)
#define GPIO95_RTC_CS (95)
#define GPIO96_RTC_WR (96)
@@ -292,34 +292,34 @@
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO82_MMC_IRQ,
+ .gpio_card_ro = GPIO85_MMC_WP,
+ .gpio_power = -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
- irq_handler_t cm_x300_detect_int,
- void *data)
+static int cm_x300_mci2_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
{
return 0;
}
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
{
}
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cm_x300_mci_init,
- .exit = cm_x300_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
-};
-
static struct pxamci_platform_data cm_x300_mci2_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = GPIO82_MMC2_IRQ,
- .gpio_card_ro = GPIO85_MMC2_WP,
+ .init = cm_x300_mci2_init,
+ .exit = cm_x300_mci2_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
.gpio_power = -1,
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index ee8d603..82ff573 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
@@ -375,6 +376,43 @@
};
+static struct gpio_keys_button spitz_gpio_keys[] = {
+ {
+ .type = EV_PWR,
+ .code = KEY_SUSPEND,
+ .gpio = SPITZ_GPIO_ON_KEY,
+ .desc = "On/Off",
+ .wakeup = 1,
+ },
+ /* Two buttons detecting the lid state */
+ {
+ .type = EV_SW,
+ .code = 0,
+ .gpio = SPITZ_GPIO_SWA,
+ .desc = "Display Down",
+ },
+ {
+ .type = EV_SW,
+ .code = 1,
+ .gpio = SPITZ_GPIO_SWB,
+ .desc = "Lid Closed",
+ },
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+ .buttons = spitz_gpio_keys,
+ .nbuttons = ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &spitz_gpio_keys_platform_data,
+ },
+};
+
+
/*
* Spitz LEDs
*/
@@ -689,6 +727,7 @@
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
&spitzkbd_device,
+ &spitz_gpio_keys_device,
&spitzled_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e993140..9264d81 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -122,10 +122,7 @@
select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
- and is used in the Maverick EP9312 and the Samsung S3C2410.
-
- More information on the Maverick EP9312 at
- <http://linuxdevices.com/products/PD2382866068.html>.
+ and is used in the Cirrus EP93xx and the Samsung S3C2410.
Say Y if you want support for the ARM920T processor.
Otherwise, say N.
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
index fe58138..f7d2ec5 100644
--- a/arch/arm/oprofile/op_model_v6.c
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -33,6 +33,9 @@
#ifdef CONFIG_ARCH_OMAP2
3,
#endif
+#ifdef CONFIG_ARCH_BCMRING
+ IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
};
static void armv6_pmu_stop(void)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 0eb676d..b53125f 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -978,6 +978,14 @@
{
u32 l;
+ /* Disable all interrupts on the channel */
+ if (cpu_class_is_omap1())
+ dma_write(0, CICR(lch));
+
+ l = dma_read(CCR(lch));
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -995,18 +1003,8 @@
next_lch = dma_chan[cur_lch].next_lch;
cur_lch = next_lch;
} while (next_lch != -1);
-
- return;
}
- /* Disable all interrupts on the channel */
- if (cpu_class_is_omap1())
- dma_write(0, CICR(lch));
-
- l = dma_read(CCR(lch));
- l &= ~OMAP_DMA_CCR_EN;
- dma_write(l, CCR(lch));
-
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
EXPORT_SYMBOL(omap_stop_dma);
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index d91b9be..3ae52cc 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,7 +10,7 @@
#ifndef ASMARM_ARCH_KEYPAD_H
#define ASMARM_ARCH_KEYPAD_H
-#include <linux/input/matrix_keypad.h>
+#warning: Please update the board to use matrix_keypad.h instead
struct omap_kp_platform_data {
int rows;
@@ -37,6 +37,9 @@
#define KEY_PERSISTENT 0x00800000
#define KEYNUM_MASK 0x00EFFFFF
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+ KEY_PERSISTENT)
#endif
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4b60127..94584f1 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -664,7 +664,7 @@
nent = 1; /* for the next L1 entry */
} else {
bytes = IOPGD_SIZE;
- if (*iopgd & IOPGD_SUPER) {
+ if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
nent *= 16;
/* rewind to the 1st entry */
iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 6b0a2b6..0974c0e 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -527,7 +527,7 @@
no_signal:
/* Did we come from a system call? */
- if (__frame->syscallno >= 0) {
+ if (__frame->syscallno != -1) {
/* Restart the system call - no handlers present */
switch (__frame->gr8) {
case -ERESTARTNOHAND:
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index cee8080..dd38608 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -210,7 +210,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
};
sram@8000 {
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 4c36186..8e9be6b 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -199,7 +199,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
rtc@50 {
compatible = "at,24c08";
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index de30b3f9..82ff2b1 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -247,7 +247,6 @@
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
@@ -256,7 +255,6 @@
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200-sram";
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index d13cb11..e45a63b 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -251,7 +251,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
@@ -260,7 +259,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
};
sram@8000 {
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index e297d8b..0c3902b 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -223,7 +223,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
@@ -232,7 +231,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
};
sram@8000 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 7be8ca0..6ca4fc1 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -222,7 +222,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
rtc@68 {
compatible = "dallas,ds1339";
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c2b8dbf..c353dac 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -209,7 +209,6 @@
reg = <0x1700 0x20>;
interrupts = <9 0x8>;
interrupt-parent = < &ipic >;
- fsl5200-clocking;
};
i2c@1720 {
@@ -220,7 +219,6 @@
reg = <0x1720 0x20>;
interrupts = <10 0x8>;
interrupt-parent = < &ipic >;
- fsl5200-clocking;
};
i2c@1740 {
@@ -231,7 +229,6 @@
reg = <0x1740 0x20>;
interrupts = <11 0x8>;
interrupt-parent = < &ipic >;
- fsl5200-clocking;
};
i2ccontrol@1760 {
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
new file mode 100644
index 0000000..b72a758
--- /dev/null
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -0,0 +1,332 @@
+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "manroland,mucmc52";
+ compatible = "manroland,mucmc52";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ gpt0: timer@600 { // GPT 0 in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt1: timer@610 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt2: timer@620 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt3: timer@630 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { /* PSC1 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2200 { /* PSC2 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2200 0x100>;
+ interrupts = <2 2 0>;
+ };
+
+ serial@2c00 { /* PSC6 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ compatible = "intel,lxt971";
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ hwmon@2c {
+ compatible = "ad,adm9240";
+ reg = <0x2c>;
+ };
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x10 */
+ 0x8000 0 0 1 &mpc5200_pic 0 3 3
+ 0x8000 0 0 2 &mpc5200_pic 0 3 3
+ 0x8000 0 0 3 &mpc5200_pic 0 2 3
+ 0x8000 0 0 4 &mpc5200_pic 0 1 3
+ >;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xff800000 0x00800000
+ 1 0 0x80000000 0x00800000
+ 3 0 0x80000000 0x00800000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ partition@0 {
+ label = "DTS";
+ reg = <0x0 0x00100000>;
+ };
+ partition@100000 {
+ label = "Kernel";
+ reg = <0x100000 0x00200000>;
+ };
+ partition@300000 {
+ label = "RootFS";
+ reg = <0x00300000 0x00200000>;
+ };
+ partition@500000 {
+ label = "user";
+ reg = <0x00500000 0x00200000>;
+ };
+ partition@700000 {
+ label = "U-Boot";
+ reg = <0x00700000 0x00040000>;
+ };
+ partition@740000 {
+ label = "Env";
+ reg = <0x00740000 0x00020000>;
+ };
+ partition@760000 {
+ label = "red. Env";
+ reg = <0x00760000 0x00020000>;
+ };
+ partition@780000 {
+ label = "reserve";
+ reg = <0x00780000 0x00080000>;
+ };
+ };
+
+ simple100: gpio-controller-100@3,600100 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600100 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple104: gpio-controller-104@3,600104 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600104 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple200: gpio-controller-200@3,600200 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600200 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple201: gpio-controller-201@3,600201 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600201 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple202: gpio-controller-202@3,600202 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600202 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple203: gpio-controller-203@3,600203 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600203 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple204: gpio-controller-204@3,600204 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600204 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple206: gpio-controller-206@3,600206 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600206 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple207: gpio-controller-207@3,600207 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600207 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple20f: gpio-controller-20f@3,60020f {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x0060020f 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ };
+};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 30bfdc0..8a4ec30 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -244,7 +244,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
@@ -253,7 +252,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 0300426..85d857a 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -244,7 +244,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
@@ -253,7 +252,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c9590b5..1db07f6 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -160,7 +160,6 @@
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
rtc@68 {
compatible = "dallas,ds1307";
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
new file mode 100644
index 0000000..019264c
--- /dev/null
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -0,0 +1,284 @@
+/*
+ * Manroland uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "manroland,uc101";
+ compatible = "manroland,uc101";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ gpt0: timer@600 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt1: timer@610 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt2: timer@620 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt3: timer@630 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt4: timer@640 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt5: timer@650 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt6: timer@660 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt7: timer@670 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { /* PSC1 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2200 { /* PSC2 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2200 0x100>;
+ interrupts = <2 2 0>;
+ };
+
+ serial@2c00 { /* PSC6 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ compatible = "intel,lxt971";
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ fsl,preserve-clocking;
+ clock-frequency = <400000>;
+
+ hwmon@2c {
+ compatible = "ad,adm9240";
+ reg = <0x2c>;
+ };
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xff800000 0x00800000
+ 1 0 0x80000000 0x00800000
+ 3 0 0x80000000 0x00800000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "DTS";
+ reg = <0x0 0x00100000>;
+ };
+ partition@100000 {
+ label = "Kernel";
+ reg = <0x100000 0x00200000>;
+ };
+ partition@300000 {
+ label = "RootFS";
+ reg = <0x00300000 0x00200000>;
+ };
+ partition@500000 {
+ label = "user";
+ reg = <0x00500000 0x00200000>;
+ };
+ partition@700000 {
+ label = "U-Boot";
+ reg = <0x00700000 0x00040000>;
+ };
+ partition@740000 {
+ label = "Env";
+ reg = <0x00740000 0x00010000>;
+ };
+ partition@750000 {
+ label = "red. Env";
+ reg = <0x00750000 0x00010000>;
+ };
+ partition@760000 {
+ label = "reserve";
+ reg = <0x00760000 0x000a0000>;
+ };
+ };
+
+ };
+};
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 3838b77..0396ce7 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:47:44 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:22 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -52,11 +56,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -77,11 +83,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -118,6 +124,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -140,7 +158,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -219,11 +237,13 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -239,9 +259,10 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -252,6 +273,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -328,6 +350,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -342,6 +365,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -367,6 +391,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -457,6 +482,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -495,10 +521,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -519,7 +541,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -558,14 +579,14 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -636,6 +657,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -646,6 +668,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -666,23 +689,23 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -713,25 +736,12 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -775,11 +785,12 @@
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
@@ -866,6 +877,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -885,10 +900,13 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -959,12 +977,12 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1064,6 +1082,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1073,6 +1092,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1090,10 +1110,14 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1105,11 +1129,12 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
@@ -1118,23 +1143,25 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1159,7 +1186,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -1200,11 +1226,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 29b0f34..f5c07fd 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:04 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:24 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -52,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -78,11 +84,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -106,7 +113,6 @@
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -119,6 +125,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
@@ -127,14 +140,19 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +165,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -228,11 +246,13 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -248,9 +268,10 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -264,6 +285,7 @@
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -348,6 +370,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -362,6 +385,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -387,6 +411,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -397,6 +422,7 @@
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -431,7 +457,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -454,10 +482,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -475,6 +499,8 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -483,6 +509,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -502,7 +529,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -514,11 +540,14 @@
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
@@ -540,6 +569,7 @@
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
@@ -568,6 +598,7 @@
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
@@ -586,14 +617,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -640,9 +674,12 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@@ -661,6 +698,8 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -686,10 +725,7 @@
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -759,6 +795,7 @@
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -787,6 +824,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -812,23 +850,23 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -847,30 +885,18 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -913,6 +939,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -932,10 +962,13 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -992,12 +1025,12 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1041,6 +1074,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1050,6 +1084,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1067,10 +1102,14 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1082,11 +1121,12 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
@@ -1095,23 +1135,25 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1136,7 +1178,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -1178,11 +1219,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 07b6b26..4f77a1b 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:22 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:22 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -52,11 +56,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -77,11 +83,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -118,6 +124,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -140,7 +158,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -220,11 +238,13 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -240,9 +260,10 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -253,6 +274,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -329,6 +351,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -343,6 +366,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -368,6 +392,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -458,6 +483,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -483,6 +509,7 @@
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -506,10 +533,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -532,6 +555,7 @@
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
@@ -540,7 +564,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -579,14 +602,14 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -647,6 +670,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -657,6 +681,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -676,22 +701,28 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
@@ -738,6 +769,8 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@@ -747,9 +780,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -775,25 +806,12 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -817,7 +835,7 @@
#
# LED drivers
#
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
@@ -866,6 +884,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -893,6 +912,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -912,10 +935,13 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -986,12 +1012,12 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1091,6 +1117,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1100,6 +1127,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1117,10 +1145,14 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1132,11 +1164,12 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
@@ -1145,23 +1178,25 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1186,7 +1221,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -1227,11 +1261,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index afb1a3d..f9168c1 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:42 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:25 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -52,11 +56,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -79,11 +85,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -105,7 +112,6 @@
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -118,6 +124,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
@@ -125,7 +138,6 @@
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -133,7 +145,13 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -146,7 +164,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -227,11 +245,13 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -247,9 +267,10 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -336,6 +357,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -350,6 +372,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -375,6 +398,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -382,9 +406,9 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
@@ -467,6 +491,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
@@ -492,10 +517,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -515,6 +536,7 @@
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
@@ -536,6 +558,7 @@
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
@@ -564,6 +587,7 @@
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
@@ -582,14 +606,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -636,16 +663,16 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -722,6 +749,7 @@
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -750,6 +778,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -776,23 +805,23 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -811,30 +840,18 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -871,15 +888,17 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -995,6 +1014,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1022,6 +1042,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1041,12 +1065,16 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -1114,7 +1142,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1201,6 +1228,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1210,6 +1238,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1223,23 +1252,12 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 8585c7c..75c835c 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:57 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:23 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -52,11 +56,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -77,11 +83,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -118,6 +124,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -145,7 +163,7 @@
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -225,11 +243,13 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -245,9 +265,10 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -258,6 +279,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -334,6 +356,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -348,6 +371,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -373,6 +397,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -382,9 +407,9 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
@@ -464,6 +489,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -502,10 +528,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -529,6 +551,7 @@
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
@@ -538,7 +561,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -577,14 +599,14 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -654,6 +676,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -664,6 +687,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -685,22 +709,28 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
@@ -747,6 +777,8 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@@ -756,9 +788,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -789,25 +819,12 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -851,11 +868,12 @@
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
@@ -969,6 +987,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -996,6 +1015,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1015,10 +1038,13 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1089,12 +1115,12 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1194,6 +1220,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1203,6 +1230,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1220,10 +1248,14 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1235,11 +1267,12 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
@@ -1248,23 +1281,25 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1289,7 +1324,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -1331,11 +1365,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index aaa4416..523d5fe 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Mon Apr 20 11:06:25 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:21 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,12 +57,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -79,11 +85,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
@@ -103,7 +110,6 @@
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -116,6 +122,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
@@ -124,14 +137,19 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -144,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -205,7 +223,7 @@
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=y
#
# Kernel options
@@ -229,11 +247,13 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -249,9 +269,10 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -265,6 +286,7 @@
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -349,6 +371,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -363,6 +386,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -388,6 +412,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -397,9 +422,9 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
@@ -458,6 +483,7 @@
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -493,6 +519,7 @@
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -529,7 +556,9 @@
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -552,10 +581,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -572,6 +597,8 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -580,6 +607,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -599,7 +627,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -611,11 +638,14 @@
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
@@ -637,6 +667,7 @@
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
@@ -665,6 +696,7 @@
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
@@ -684,14 +716,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -739,16 +774,17 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -854,6 +890,7 @@
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
@@ -883,6 +920,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
@@ -910,10 +948,6 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -935,6 +969,11 @@
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -957,16 +996,27 @@
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
@@ -1019,6 +1069,8 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1031,9 +1083,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1073,31 +1123,20 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
@@ -1167,6 +1206,7 @@
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
@@ -1198,7 +1238,6 @@
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
@@ -1217,10 +1256,11 @@
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
@@ -1231,10 +1271,11 @@
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1261,15 +1302,17 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1400,6 +1443,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1411,6 +1455,7 @@
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
@@ -1434,6 +1479,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1453,10 +1502,13 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1533,12 +1585,12 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1624,6 +1676,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1633,6 +1686,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1650,10 +1704,14 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1665,11 +1723,12 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
@@ -1678,23 +1737,25 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1719,7 +1780,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -1761,11 +1821,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
new file mode 100644
index 0000000..18af460
--- /dev/null
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -0,0 +1,2199 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Fri Oct 16 11:37:15 2009
+#
+CONFIG_PPC64=y
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_64 is not set
+CONFIG_PPC_BOOK3E_64=y
+CONFIG_PPC_BOOK3E=y
+CONFIG_PPC_FPU=y
+CONFIG_BOOKE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_64=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+CONFIG_PPC_PERF_CTRS=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
+CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_U3_DART is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
+CONFIG_MAX_ACTIVE_REGIONS=256
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
+# CONFIG_SCHED_SMT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
+CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+# CONFIG_NF_CONNTRACK_SANE is not set
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+# CONFIG_IEEE1394_PCILYNX is not set
+CONFIG_IEEE1394_SBP2=m
+CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_WINDFARM=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=m
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=y
+CONFIG_ACENIC_OMIT_TIGON_I=y
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+CONFIG_IXGB=m
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+CONFIG_TR=y
+CONFIG_IBMOL=y
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+CONFIG_I2C_AMD8111=y
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+CONFIG_USB_APPLEDISPLAY=m
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+# CONFIG_INFINIBAND_AMSO1100 is not set
+# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+# CONFIG_EDAC_CPC925 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index f9fd54b..9763267 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -658,42 +658,43 @@
cmpdi r0,0
crandc eq,cr1*4+eq,eq
bne restore
- /* here we are preempting the current task */
-1:
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl .trace_hardirqs_on
- /* Note: we just clobbered r10 which used to contain the previous
- * MSR before the hard-disabling done by the caller of do_work.
- * We don't have that value anymore, but it doesn't matter as
- * we will hard-enable unconditionally, we can just reload the
- * current MSR into r10
+
+ /* Here we are preempting the current task.
+ *
+ * Ensure interrupts are soft-disabled. We also properly mark
+ * the PACA to reflect the fact that they are hard-disabled
+ * and trace the change
*/
- mfmsr r10
-#endif /* CONFIG_TRACE_IRQFLAGS */
- li r0,1
+ li r0,0
stb r0,PACASOFTIRQEN(r13)
stb r0,PACAHARDIRQEN(r13)
+ TRACE_DISABLE_INTS
+
+ /* Call the scheduler with soft IRQs off */
+1: bl .preempt_schedule_irq
+
+ /* Hard-disable interrupts again (and update PACA) */
#ifdef CONFIG_PPC_BOOK3E
- wrteei 1
- bl .preempt_schedule
wrteei 0
#else
- ori r10,r10,MSR_EE
- mtmsrd r10,1 /* reenable interrupts */
- bl .preempt_schedule
mfmsr r10
- clrrdi r9,r1,THREAD_SHIFT
- rldicl r10,r10,48,1 /* disable interrupts again */
+ rldicl r10,r10,48,1
rotldi r10,r10,16
mtmsrd r10,1
#endif /* CONFIG_PPC_BOOK3E */
+ li r0,0
+ stb r0,PACAHARDIRQEN(r13)
+
+ /* Re-test flags and eventually loop */
+ clrrdi r9,r1,THREAD_SHIFT
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
b restore
user_work:
-#endif
+#endif /* CONFIG_PREEMPT */
+
/* Enable interrupts */
#ifdef CONFIG_PPC_BOOK3E
wrteei 1
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ba949a2..ccf56ac 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -97,7 +97,9 @@
* to do an appropriate TLB flush here too
*/
if (bus->self) {
+#ifdef CONFIG_PPC_STD_MMU_64
struct resource *res = bus->resource[0];
+#endif
pr_debug("IO unmapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index bbcbae1..87f1663 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -116,20 +116,23 @@
static inline u32 perf_get_misc_flags(struct pt_regs *regs)
{
unsigned long mmcra = regs->dsisr;
+ unsigned long sihv = MMCRA_SIHV;
+ unsigned long sipr = MMCRA_SIPR;
if (TRAP(regs) != 0xf00)
return 0; /* not a PMU interrupt */
if (ppmu->flags & PPMU_ALT_SIPR) {
- if (mmcra & POWER6_MMCRA_SIHV)
- return PERF_RECORD_MISC_HYPERVISOR;
- return (mmcra & POWER6_MMCRA_SIPR) ?
- PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL;
+ sihv = POWER6_MMCRA_SIHV;
+ sipr = POWER6_MMCRA_SIPR;
}
- if (mmcra & MMCRA_SIHV)
+
+ /* PR has priority over HV, so order below is important */
+ if (mmcra & sipr)
+ return PERF_RECORD_MISC_USER;
+ if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV))
return PERF_RECORD_MISC_HYPERVISOR;
- return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER :
- PERF_RECORD_MISC_KERNEL;
+ return PERF_RECORD_MISC_KERNEL;
}
/*
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 2ec1eae..c930ac3 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1172,7 +1172,7 @@
unsigned long base = mm->brk;
unsigned long ret;
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
/*
* If we are using 1TB segments and we are allowed to randomise
* the heap, we can put it above 1TB so it is backed by a 1TB
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 797ea95..04f638d 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -57,7 +57,6 @@
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/mmu-hash64.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 94e2df3..137dc22 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -50,6 +50,9 @@
/* Max supported size for symbol names */
#define MAX_SYMNAME 64
+/* The alignment of the vDSO */
+#define VDSO_ALIGNMENT (1 << 16)
+
extern char vdso32_start, vdso32_end;
static void *vdso32_kbase = &vdso32_start;
static unsigned int vdso32_pages;
@@ -231,15 +234,21 @@
* pick a base address for the vDSO in process space. We try to put it
* at vdso_base which is the "natural" base for it, but we might fail
* and end up putting it elsewhere.
+ * Add enough to the size so that the result can be aligned.
*/
down_write(&mm->mmap_sem);
vdso_base = get_unmapped_area(NULL, vdso_base,
- vdso_pages << PAGE_SHIFT, 0, 0);
+ (vdso_pages << PAGE_SHIFT) +
+ ((VDSO_ALIGNMENT - 1) & PAGE_MASK),
+ 0, 0);
if (IS_ERR_VALUE(vdso_base)) {
rc = vdso_base;
goto fail_mmapsem;
}
+ /* Add required alignment. */
+ vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT);
+
/*
* Put vDSO base into mm struct. We need to do this before calling
* install_special_mapping or the perf counter mmap tracking code
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 904ef13..0546bcd 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -25,7 +25,7 @@
. = ALIGN(16);
.text : {
*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
- }
+ } :text
PROVIDE(__etext = .);
PROVIDE(_etext = .);
PROVIDE(etext = .);
@@ -56,7 +56,7 @@
.fixup : { *(.fixup) }
.dynamic : { *(.dynamic) } :text :dynamic
- .got : { *(.got) }
+ .got : { *(.got) } :text
.plt : { *(.plt) }
_end = .;
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index c31e5b5..d45be5b 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -51,6 +51,8 @@
/* list of the supported boards */
static char *board[] __initdata = {
"intercontrol,digsy-mtc",
+ "manroland,mucmc52",
+ "manroland,uc101",
"phytec,pcm030",
"phytec,pcm032",
"promess,motionpro",
diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile
index cc7161f..ce01492 100644
--- a/arch/powerpc/platforms/iseries/Makefile
+++ b/arch/powerpc/platforms/iseries/Makefile
@@ -1,18 +1,9 @@
EXTRA_CFLAGS += -mno-minimal-toc
-extra-y += dt.o
-
obj-y += exception.o
-obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \
+obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \
hvcall.o proc.o htab.o iommu.o misc.o irq.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_VIOPATH) += viopath.o vio.o
obj-$(CONFIG_MODULES) += ksyms.o
-
-quiet_cmd_dt_strings = DT_STR $@
- cmd_dt_strings = $(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings \
- $< $@
-
-$(obj)/dt_mod.o: $(obj)/dt.o
- $(call if_changed,dt_strings)
diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c
index c5a87a7..7f45a51 100644
--- a/arch/powerpc/platforms/iseries/dt.c
+++ b/arch/powerpc/platforms/iseries/dt.c
@@ -51,11 +51,16 @@
/*
* These are created by the linker script at the start and end
- * of the section containing all the strings from this file.
+ * of the section containing all the strings marked with the DS macro.
*/
extern char __dt_strings_start[];
extern char __dt_strings_end[];
+#define DS(s) ({ \
+ static const char __s[] __attribute__((section(".dt_strings"))) = s; \
+ __s; \
+})
+
struct iseries_flat_dt {
struct boot_param_header header;
u64 reserve_map[2];
@@ -64,9 +69,8 @@
static void * __initdata dt_data;
/*
- * Putting these strings here keeps them out of the section
- * that we rename to .dt_strings using objcopy and capture
- * for the strings blob of the flattened device tree.
+ * Putting these strings here keeps them out of the .dt_strings section
+ * that we capture for the strings blob of the flattened device tree.
*/
static char __initdata device_type_cpu[] = "cpu";
static char __initdata device_type_memory[] = "memory";
@@ -173,7 +177,7 @@
#define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE)
-static void __init dt_prop(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop(struct iseries_flat_dt *dt, const char *name,
const void *data, int len)
{
unsigned long offset;
@@ -191,44 +195,32 @@
/* The actual data. */
dt_push_bytes(dt, data, len);
}
+#define dt_prop(dt, name, data, len) __dt_prop((dt), DS(name), (data), (len))
-static void __init dt_prop_str(struct iseries_flat_dt *dt, const char *name,
- const char *data)
-{
- dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */
-}
+#define dt_prop_str(dt, name, data) \
+ dt_prop((dt), name, (data), strlen((data)) + 1); /* + 1 for NULL */
-static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
u32 data)
{
- dt_prop(dt, name, &data, sizeof(u32));
+ __dt_prop(dt, name, &data, sizeof(u32));
}
+#define dt_prop_u32(dt, name, data) __dt_prop_u32((dt), DS(name), (data))
-static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt,
- const char *name,
- u64 data)
+static void __init __maybe_unused __dt_prop_u64(struct iseries_flat_dt *dt,
+ const char *name, u64 data)
{
- dt_prop(dt, name, &data, sizeof(u64));
+ __dt_prop(dt, name, &data, sizeof(u64));
}
+#define dt_prop_u64(dt, name, data) __dt_prop_u64((dt), DS(name), (data))
-static void __init dt_prop_u64_list(struct iseries_flat_dt *dt,
- const char *name, u64 *data, int n)
-{
- dt_prop(dt, name, data, sizeof(u64) * n);
-}
+#define dt_prop_u64_list(dt, name, data, n) \
+ dt_prop((dt), name, (data), sizeof(u64) * (n))
-static void __init dt_prop_u32_list(struct iseries_flat_dt *dt,
- const char *name, u32 *data, int n)
-{
- dt_prop(dt, name, data, sizeof(u32) * n);
-}
+#define dt_prop_u32_list(dt, name, data, n) \
+ dt_prop((dt), name, (data), sizeof(u32) * (n))
-#ifdef notyet
-static void __init dt_prop_empty(struct iseries_flat_dt *dt, const char *name)
-{
- dt_prop(dt, name, NULL, 0);
-}
-#endif
+#define dt_prop_empty(dt, name) dt_prop((dt), name, NULL, 0)
static void __init dt_cpus(struct iseries_flat_dt *dt)
{
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index c6f0a71b..bdbe96c 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -517,6 +517,15 @@
in_xmon = 0;
#endif
+#ifdef CONFIG_BOOKE
+ if (regs->msr & MSR_DE) {
+ bp = at_breakpoint(regs->nip);
+ if (bp != NULL) {
+ regs->nip = (unsigned long) &bp->instr[0];
+ atomic_inc(&bp->ref_count);
+ }
+ }
+#else
if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
bp = at_breakpoint(regs->nip);
if (bp != NULL) {
@@ -530,7 +539,7 @@
}
}
}
-
+#endif
insert_cpu_bpts();
local_irq_restore(flags);
@@ -894,6 +903,14 @@
}
}
+#ifdef CONFIG_BOOKE
+static int do_step(struct pt_regs *regs)
+{
+ regs->msr |= MSR_DE;
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+ return 1;
+}
+#else
/*
* Step a single instruction.
* Some instructions we emulate, others we execute with MSR_SE set.
@@ -924,6 +941,7 @@
regs->msr |= MSR_SE;
return 1;
}
+#endif
static void bootcmds(void)
{
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0dc7e3c..88cdeb9 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -121,6 +121,9 @@
bool
select ARCH_SUSPEND_POSSIBLE
+config SYS_SUPPORTS_HUGETLBFS
+ bool
+
config SYS_SUPPORTS_SMP
bool
@@ -195,6 +198,7 @@
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SH4A
bool
@@ -209,6 +213,7 @@
bool
select CPU_HAS_FPU
select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SHX2
bool
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fc51a91..66e40aa 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -199,7 +199,7 @@
libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y)
libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y)
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \
zImage vmlinux.srec romImage
PHONY += maketools $(BOOT_TARGETS) FORCE
@@ -225,6 +225,7 @@
@echo ' vmlinux.srec - Create an ELF S-record'
@echo '* uImage - Alias to bootable U-Boot image'
@echo ' uImage.srec - Create an S-record for U-Boot'
+ @echo ' uImage.bin - Kernel-only image for U-Boot (bin)'
@echo '* uImage.gz - Kernel-only image for U-Boot (gzip)'
@echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)'
@echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)'
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 4af3a77..c37617e 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -11,10 +11,6 @@
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/leds.h>
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
index af64d03..a5c0df7 100644
--- a/arch/sh/boards/mach-rsk/setup.c
+++ b/arch/sh/boards/mach-rsk/setup.c
@@ -15,14 +15,12 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#ifdef CONFIG_MTD
#include <linux/mtd/map.h>
+#endif
#include <asm/machvec.h>
#include <asm/io.h>
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
static struct mtd_partition rsk_partitions[] = {
{
.name = "Bootloader",
@@ -41,6 +39,8 @@
};
static struct physmap_flash_data flash_data = {
+ .parts = rsk_partitions,
+ .nr_parts = ARRAY_SIZE(rsk_partitions),
.width = 2,
};
@@ -60,7 +60,8 @@
},
};
-static struct mtd_info *flash_mtd;
+#ifdef CONFIG_MTD
+static const char *probes[] = { "cmdlinepart", NULL };
static struct map_info rsk_flash_map = {
.name = "RSK+ Flash",
@@ -68,6 +69,10 @@
.bankwidth = 2,
};
+static struct mtd_info *flash_mtd;
+
+static struct mtd_partition *parsed_partitions;
+
static void __init set_mtd_partitions(void)
{
int nr_parts = 0;
@@ -77,14 +82,14 @@
nr_parts = parse_mtd_partitions(flash_mtd, probes,
&parsed_partitions, 0);
/* If there is no partition table, used the hard coded table */
- if (nr_parts <= 0) {
- flash_data.parts = rsk_partitions;
- flash_data.nr_parts = ARRAY_SIZE(rsk_partitions);
- } else {
+ if (nr_parts > 0) {
flash_data.nr_parts = nr_parts;
flash_data.parts = parsed_partitions;
}
}
+#else
+static inline void set_mtd_partitions(void) {}
+#endif
static struct platform_device *rsk_devices[] __initdata = {
&flash_device,
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index a131687..cb8cf55 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -20,11 +20,12 @@
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
CONFIG_ENTRY_OFFSET ?= 0x00001000
+suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
suffix-$(CONFIG_KERNEL_LZMA) := lzma
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin
extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
subdir- := compressed romimage
@@ -88,6 +89,9 @@
$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
$(call if_changed,uimage,lzma)
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+ $(call if_changed,uimage,none)
+
OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
$(call if_changed,objcopy)
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 03b3616..2d07084 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -20,6 +20,7 @@
#include <linux/list.h>
#include <linux/mempool.h>
#include <linux/mm.h>
+#include <linux/ftrace.h>
#include <asm/dwarf.h>
#include <asm/unwinder.h>
#include <asm/sections.h>
@@ -557,6 +558,27 @@
if (!pc && !prev)
pc = (unsigned long)current_text_addr();
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ /*
+ * If our stack has been patched by the function graph tracer
+ * then we might see the address of return_to_handler() where we
+ * expected to find the real return address.
+ */
+ if (pc == (unsigned long)&return_to_handler) {
+ int index = current->curr_ret_stack;
+
+ /*
+ * We currently have no way of tracking how many
+ * return_to_handler()'s we've seen. If there is more
+ * than one patched return address on our stack,
+ * complain loudly.
+ */
+ WARN_ON(index > 0);
+
+ pc = current->ret_stack[index].ret;
+ }
+#endif
+
frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
if (!frame) {
printk(KERN_ERR "Unable to allocate a dwarf frame\n");
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 7cb933b..eac7da7 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
+#include <linux/ftrace.h>
#include <asm/processor.h>
#include <asm/machvec.h>
#include <asm/uaccess.h>
@@ -106,7 +107,7 @@
static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
#endif
-asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
#ifdef CONFIG_IRQSTACKS
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 86c2704..444cce3 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -85,6 +85,20 @@
DECLARE_EXPORT(__movstr_i4_odd);
DECLARE_EXPORT(__movstrSI12_i4);
DECLARE_EXPORT(__movmem);
+DECLARE_EXPORT(__movmemSI8);
+DECLARE_EXPORT(__movmemSI12);
+DECLARE_EXPORT(__movmemSI16);
+DECLARE_EXPORT(__movmemSI20);
+DECLARE_EXPORT(__movmemSI24);
+DECLARE_EXPORT(__movmemSI28);
+DECLARE_EXPORT(__movmemSI32);
+DECLARE_EXPORT(__movmemSI36);
+DECLARE_EXPORT(__movmemSI40);
+DECLARE_EXPORT(__movmemSI44);
+DECLARE_EXPORT(__movmemSI48);
+DECLARE_EXPORT(__movmemSI52);
+DECLARE_EXPORT(__movmemSI56);
+DECLARE_EXPORT(__movmemSI60);
DECLARE_EXPORT(__movmem_i4_even);
DECLARE_EXPORT(__movmem_i4_odd);
DECLARE_EXPORT(__movmemSI12_i4);
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 64dc1ad..7f7b52f 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -227,7 +227,7 @@
choice
prompt "HugeTLB page size"
- depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+ depends on HUGETLB_PAGE
default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
default HUGETLB_PAGE_SIZE_64K
diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld
index 0f6ec455..03c0683 100644
--- a/arch/x86/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
@@ -53,6 +53,9 @@
/DISCARD/ : { *(.note*) }
+ /*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT(_end <= 0x8000, "Setup too big!");
. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
/* Necessary for the very-old-loader check to work... */
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 25a9284..d823c24 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -143,6 +143,7 @@
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
+ | 1*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 0*SD_SHARE_PKG_RESOURCES \
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 04eb6c9..d1414af 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -19,6 +19,8 @@
#include <asm/types.h>
#include <asm/percpu.h>
#include <asm/uv/uv_mmrs.h>
+#include <asm/irq_vectors.h>
+#include <asm/io_apic.h>
/*
@@ -114,7 +116,7 @@
/*
* The largest possible NASID of a C or M brick (+ 2)
*/
-#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2)
+#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_BLADES * 2)
struct uv_scir_s {
struct timer_list timer;
@@ -230,6 +232,20 @@
return uv_soc_phys_ram_to_gpa(__pa(v));
}
+/* gnode -> pnode */
+static inline unsigned long uv_gpa_to_gnode(unsigned long gpa)
+{
+ return gpa >> uv_hub_info->m_val;
+}
+
+/* gpa -> pnode */
+static inline int uv_gpa_to_pnode(unsigned long gpa)
+{
+ unsigned long n_mask = (1UL << uv_hub_info->n_val) - 1;
+
+ return uv_gpa_to_gnode(gpa) & n_mask;
+}
+
/* pnode, offset --> socket virtual */
static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
{
@@ -421,9 +437,14 @@
static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
{
unsigned long val;
+ unsigned long dmode = dest_Fixed;
+
+ if (vector == NMI_VECTOR)
+ dmode = dest_NMI;
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
+ (dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
(vector << UVH_IPI_INT_VECTOR_SHFT);
uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
}
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
index 7da00b7..060fff8 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -57,5 +57,8 @@
*(.note*)
}
+ /*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!");
}
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index f5f5886..326c254 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -352,14 +352,14 @@
for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
alias.v = uv_read_local_mmr(redir_addrs[i].alias);
- if (alias.s.base == 0) {
+ if (alias.s.enable && alias.s.base == 0) {
*size = (1UL << alias.s.m_alias);
redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
return;
}
}
- BUG();
+ *base = *size = 0;
}
enum map_type {map_wb, map_uc};
@@ -619,12 +619,12 @@
uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
uv_cpu_hub_info(cpu)->m_val = m_val;
- uv_cpu_hub_info(cpu)->n_val = m_val;
+ uv_cpu_hub_info(cpu)->n_val = n_val;
uv_cpu_hub_info(cpu)->numa_blade_id = blade;
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_cpu_hub_info(cpu)->pnode = pnode;
uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
- uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+ uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1;
uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index b1598a9..721a77c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1214,7 +1214,8 @@
rdmsrl(MSR_IA32_MCG_CAP, cap);
b = cap & MCG_BANKCNT_MASK;
- printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+ if (!banks)
+ printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
if (b > MAX_NR_BANKS) {
printk(KERN_WARNING
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 503c1f2..1740c85 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -23,8 +23,6 @@
static struct bau_control **uv_bau_table_bases __read_mostly;
static int uv_bau_retry_limit __read_mostly;
-/* position of pnode (which is nasid>>1): */
-static int uv_nshift __read_mostly;
/* base pnode in this partition */
static int uv_partition_base_pnode __read_mostly;
@@ -723,7 +721,7 @@
BUG_ON(!adp);
pa = uv_gpa(adp); /* need the real nasid*/
- n = pa >> uv_nshift;
+ n = uv_gpa_to_pnode(pa);
m = pa & uv_mmask;
uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
@@ -778,7 +776,7 @@
* need the pnode of where the memory was really allocated
*/
pa = uv_gpa(pqp);
- pn = pa >> uv_nshift;
+ pn = uv_gpa_to_pnode(pa);
uv_write_global_mmr64(pnode,
UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
@@ -843,8 +841,7 @@
GFP_KERNEL, cpu_to_node(cur_cpu));
uv_bau_retry_limit = 1;
- uv_nshift = uv_hub_info->n_val;
- uv_mmask = (1UL << uv_hub_info->n_val) - 1;
+ uv_mmask = (1UL << uv_hub_info->m_val) - 1;
nblades = uv_num_possible_blades();
uv_bau_table_bases = (struct bau_control **)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 92929fb..3c68fe2 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -305,6 +305,9 @@
#ifdef CONFIG_X86_32
+/*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
"kernel image bigger than KERNEL_IMAGE_SIZE");
#else
diff --git a/block/blk-core.c b/block/blk-core.c
index ac0fa10..71da511 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1161,7 +1161,7 @@
const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
int rw_flags;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER) && bio_has_data(bio) &&
+ if (bio_rw_flagged(bio, BIO_RW_BARRIER) &&
(q->next_ordered == QUEUE_ORDERED_NONE)) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edda9ea..bd112c8 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -949,7 +949,7 @@
lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
- if (max_part > 0)
+ if (max_part > 0 && bdev)
ioctl_by_bdev(bdev, BLKRRPART, 0);
mutex_unlock(&lo->lo_ctl_mutex);
/*
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index ad41f19..12fdd39 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -76,8 +76,11 @@
#endif
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
- if (need_resched())
+ if (need_resched()) {
+ local_irq_enable();
return;
+ }
+
target_state = &dev->states[next_state];
/* enter the state and update stats */
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index d335086f..77a9579 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1173,7 +1173,7 @@
pci_read_config_word(pvt->branch_1, where,
&pvt->b1_mtr[slot_row]);
debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row,
- where, pvt->b0_mtr[slot_row]);
+ where, pvt->b1_mtr[slot_row]);
} else {
pvt->b1_mtr[slot_row] = 0;
}
@@ -1232,7 +1232,7 @@
struct csrow_info *p_csrow;
int empty, channel_count;
int max_csrows;
- int mtr;
+ int mtr, mtr1;
int csrow_megs;
int channel;
int csrow;
@@ -1251,9 +1251,10 @@
/* use branch 0 for the basis */
mtr = pvt->b0_mtr[csrow >> 1];
+ mtr1 = pvt->b1_mtr[csrow >> 1];
/* if no DIMMS on this row, continue */
- if (!MTR_DIMMS_PRESENT(mtr))
+ if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1))
continue;
/* FAKE OUT VALUES, FIXME */
diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
index b08b6d8..f99d106 100644
--- a/drivers/edac/i5400_edac.c
+++ b/drivers/edac/i5400_edac.c
@@ -46,9 +46,10 @@
/* Limits for i5400 */
#define NUM_MTRS_PER_BRANCH 4
#define CHANNELS_PER_BRANCH 2
+#define MAX_DIMMS_PER_CHANNEL NUM_MTRS_PER_BRANCH
#define MAX_CHANNELS 4
-#define MAX_DIMMS (MAX_CHANNELS * 4) /* Up to 4 DIMM's per channel */
-#define MAX_CSROWS (MAX_DIMMS * 2) /* max possible csrows per channel */
+/* max possible csrows per channel */
+#define MAX_CSROWS (MAX_DIMMS_PER_CHANNEL)
/* Device 16,
* Function 0: System Address
@@ -331,7 +332,6 @@
struct i5400_dimm_info {
int megabytes; /* size, 0 means not present */
- int dual_rank;
};
/* driver private data structure */
@@ -849,11 +849,9 @@
int n;
/* There is one MTR for each slot pair of FB-DIMMs,
- Each slot may have one or two ranks (2 csrows),
Each slot pair may be at branch 0 or branch 1.
- So, csrow should be divided by eight
*/
- n = csrow >> 3;
+ n = csrow;
if (n >= NUM_MTRS_PER_BRANCH) {
debugf0("ERROR: trying to access an invalid csrow: %d\n",
@@ -905,25 +903,22 @@
amb_present_reg = determine_amb_present_reg(pvt, channel);
/* Determine if there is a DIMM present in this DIMM slot */
- if (amb_present_reg & (1 << (csrow >> 1))) {
- dinfo->dual_rank = MTR_DIMM_RANK(mtr);
+ if (amb_present_reg & (1 << csrow)) {
+ /* Start with the number of bits for a Bank
+ * on the DRAM */
+ addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
+ /* Add thenumber of ROW bits */
+ addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+ /* add the number of COLUMN bits */
+ addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+ /* add the number of RANK bits */
+ addrBits += MTR_DIMM_RANK(mtr);
- if (!((dinfo->dual_rank == 0) &&
- ((csrow & 0x1) == 0x1))) {
- /* Start with the number of bits for a Bank
- * on the DRAM */
- addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
- /* Add thenumber of ROW bits */
- addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
- /* add the number of COLUMN bits */
- addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+ addrBits += 6; /* add 64 bits per DIMM */
+ addrBits -= 20; /* divide by 2^^20 */
+ addrBits -= 3; /* 8 bits per bytes */
- addrBits += 6; /* add 64 bits per DIMM */
- addrBits -= 20; /* divide by 2^^20 */
- addrBits -= 3; /* 8 bits per bytes */
-
- dinfo->megabytes = 1 << addrBits;
- }
+ dinfo->megabytes = 1 << addrBits;
}
}
}
@@ -951,12 +946,12 @@
return;
}
- /* Scan all the actual CSROWS (which is # of DIMMS * 2)
+ /* Scan all the actual CSROWS
* and calculate the information for each DIMM
* Start with the highest csrow first, to display it first
* and work toward the 0th csrow
*/
- max_csrows = pvt->maxdimmperch * 2;
+ max_csrows = pvt->maxdimmperch;
for (csrow = max_csrows - 1; csrow >= 0; csrow--) {
/* on an odd csrow, first output a 'boundary' marker,
@@ -1064,7 +1059,7 @@
/* Get the set of MTR[0-3] regs by each branch */
for (slot_row = 0; slot_row < NUM_MTRS_PER_BRANCH; slot_row++) {
- int where = MTR0 + (slot_row * sizeof(u32));
+ int where = MTR0 + (slot_row * sizeof(u16));
/* Branch 0 set of MTR registers */
pci_read_config_word(pvt->branch_0, where,
@@ -1146,7 +1141,7 @@
pvt = mci->pvt_info;
channel_count = pvt->maxch;
- max_csrows = pvt->maxdimmperch * 2;
+ max_csrows = pvt->maxdimmperch;
empty = 1; /* Assume NO memory */
@@ -1215,28 +1210,6 @@
}
/*
- * i5400_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels)
- *
- * ask the device how many channels are present and how many CSROWS
- * as well
- */
-static void i5400_get_dimm_and_channel_counts(struct pci_dev *pdev,
- int *num_dimms_per_channel,
- int *num_channels)
-{
- u8 value;
-
- /* Need to retrieve just how many channels and dimms per channel are
- * supported on this memory controller
- */
- pci_read_config_byte(pdev, MAXDIMMPERCH, &value);
- *num_dimms_per_channel = (int)value * 2;
-
- pci_read_config_byte(pdev, MAXCH, &value);
- *num_channels = (int)value;
-}
-
-/*
* i5400_probe1 Probe for ONE instance of device to see if it is
* present.
* return:
@@ -1263,22 +1236,16 @@
if (PCI_FUNC(pdev->devfn) != 0)
return -ENODEV;
- /* Ask the devices for the number of CSROWS and CHANNELS so
- * that we can calculate the memory resources, etc
- *
- * The Chipset will report what it can handle which will be greater
- * or equal to what the motherboard manufacturer will implement.
- *
- * As we don't have a motherboard identification routine to determine
+ /* As we don't have a motherboard identification routine to determine
* actual number of slots/dimms per channel, we thus utilize the
* resource as specified by the chipset. Thus, we might have
* have more DIMMs per channel than actually on the mobo, but this
* allows the driver to support upto the chipset max, without
* some fancy mobo determination.
*/
- i5400_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
- &num_channels);
- num_csrows = num_dimms_per_channel * 2;
+ num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL;
+ num_channels = MAX_CHANNELS;
+ num_csrows = num_dimms_per_channel;
debugf0("MC: %s(): Number of - Channels= %d DIMMS= %d CSROWS= %d\n",
__func__, num_channels, num_dimms_per_channel, num_csrows);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 157f650..cf27402 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -26,7 +26,9 @@
#include "mpc85xx_edac.h"
static int edac_dev_idx;
+#ifdef CONFIG_PCI
static int edac_pci_idx;
+#endif
static int edac_mc_idx;
static u32 orig_ddr_err_disable;
diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
index afad147..49384a7 100644
--- a/drivers/gpio/twl4030-gpio.c
+++ b/drivers/gpio/twl4030-gpio.c
@@ -460,7 +460,8 @@
return ret;
}
-static int __devexit gpio_twl4030_remove(struct platform_device *pdev)
+/* Cannot use __devexit as gpio_twl4030_probe() calls us */
+static int gpio_twl4030_remove(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
int status;
@@ -493,7 +494,7 @@
.driver.name = "twl4030_gpio",
.driver.owner = THIS_MODULE,
.probe = gpio_twl4030_probe,
- .remove = __devexit_p(gpio_twl4030_remove),
+ .remove = gpio_twl4030_remove,
};
static int __init gpio_twl4030_init(void)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 3c0d2b3..cea665d 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -626,6 +626,12 @@
return NULL;
}
+ /* it is incorrect if hsync/vsync width is zero */
+ if (!hsync_pulse_width || !vsync_pulse_width) {
+ DRM_DEBUG_KMS("Incorrect Detailed timing. "
+ "Wrong Hsync/Vsync pulse width\n");
+ return NULL;
+ }
mode = drm_mode_create(dev);
if (!mode)
return NULL;
@@ -647,6 +653,15 @@
mode->vsync_end = mode->vsync_start + vsync_pulse_width;
mode->vtotal = mode->vdisplay + vblank;
+ /* perform the basic check for the detailed timing */
+ if (mode->hsync_end > mode->htotal ||
+ mode->vsync_end > mode->vtotal) {
+ drm_mode_destroy(dev, mode);
+ DRM_DEBUG_KMS("Incorrect detailed timing. "
+ "Sync is beyond the blank.\n");
+ return NULL;
+ }
+
drm_mode_set_name(mode);
if (pt->misc & DRM_EDID_PT_INTERLACED)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 23dc9c1..9c92461 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -454,22 +454,39 @@
}
EXPORT_SYMBOL(drm_fb_helper_init_crtc_count);
-static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
+static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, u16 regno, struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_framebuffer *fb = fb_helper->fb;
int pindex;
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 *palette;
+ u32 value;
+ /* place color in psuedopalette */
+ if (regno > 16)
+ return -EINVAL;
+ palette = (u32 *)info->pseudo_palette;
+ red >>= (16 - info->var.red.length);
+ green >>= (16 - info->var.green.length);
+ blue >>= (16 - info->var.blue.length);
+ value = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset);
+ palette[regno] = value;
+ return 0;
+ }
+
pindex = regno;
if (fb->bits_per_pixel == 16) {
pindex = regno << 3;
if (fb->depth == 16 && regno > 63)
- return;
+ return -EINVAL;
if (fb->depth == 15 && regno > 31)
- return;
+ return -EINVAL;
if (fb->depth == 16) {
u16 r, g, b;
@@ -493,13 +510,7 @@
if (fb->depth != 16)
fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex);
-
- if (regno < 16 && info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
- ((u32 *) fb->pseudo_palette)[regno] =
- (regno << info->var.red.offset) |
- (regno << info->var.green.offset) |
- (regno << info->var.blue.offset);
- }
+ return 0;
}
int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
@@ -536,7 +547,9 @@
if (transp)
htransp = *transp++;
- setcolreg(crtc, hred, hgreen, hblue, start++, info);
+ rc = setcolreg(crtc, hred, hgreen, hblue, start++, info);
+ if (rc)
+ return rc;
}
crtc_funcs->load_lut(crtc);
}
@@ -555,6 +568,7 @@
struct drm_device *dev = fb_helper->dev;
struct drm_crtc *crtc;
int i;
+ int ret;
if (regno > 255)
return 1;
@@ -568,8 +582,10 @@
if (i == fb_helper->crtc_count)
continue;
+ ret = setcolreg(crtc, red, green, blue, regno, info);
+ if (ret)
+ return ret;
- setcolreg(crtc, red, green, blue, regno, info);
crtc_funcs->load_lut(crtc);
}
return 0;
@@ -928,7 +944,7 @@
{
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR :
- FB_VISUAL_DIRECTCOLOR;
+ FB_VISUAL_TRUECOLOR;
info->fix.type_aux = 0;
info->fix.xpanstep = 1; /* doing it in hw */
info->fix.ypanstep = 1; /* doing it in hw */
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 3d66703..df98814 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -582,10 +582,9 @@
DRM_INFO("register mmio size: %u\n", (unsigned)rdev->rmmio_size);
/* if we have > 1 VGA cards, then disable the radeon VGA resources */
- r = vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode);
- if (r) {
- return -EINVAL;
- }
+ /* this will fail for cards that aren't VGA class devices, just
+ * ignore it */
+ vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode);
r = radeon_init(rdev);
if (r)
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 2c2cb1e..27d6257 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -572,7 +572,7 @@
/* Sample register contents every 1 sec */
if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
- if (data->type != sch5027) {
+ if (data->type == dme1737) {
data->vid = dme1737_read(data, DME1737_REG_VID) &
0x3f;
}
@@ -1621,9 +1621,6 @@
&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
- /* Misc */
- &dev_attr_vrm.attr,
- &dev_attr_cpu0_vid.attr,
NULL
};
@@ -1631,6 +1628,18 @@
.attrs = dme1737_misc_attr,
};
+/* The following struct holds VID-related attributes. Their creation
+ depends on the chip type which is determined during module load. */
+static struct attribute *dme1737_vid_attr[] = {
+ &dev_attr_vrm.attr,
+ &dev_attr_cpu0_vid.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_vid_group = {
+ .attrs = dme1737_vid_attr,
+};
+
/* The following structs hold the PWM attributes, some of which are optional.
* Their creation depends on the chip configuration which is determined during
* module load. */
@@ -1902,6 +1911,9 @@
if (data->type != sch5027) {
sysfs_remove_group(&dev->kobj, &dme1737_misc_group);
}
+ if (data->type == dme1737) {
+ sysfs_remove_group(&dev->kobj, &dme1737_vid_group);
+ }
sysfs_remove_group(&dev->kobj, &dme1737_group);
@@ -1933,6 +1945,13 @@
goto exit_remove;
}
+ /* Create VID-related sysfs attributes */
+ if ((data->type == dme1737) &&
+ (err = sysfs_create_group(&dev->kobj,
+ &dme1737_vid_group))) {
+ goto exit_remove;
+ }
+
/* Create fan sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
if (data->has_fan & (1 << ix)) {
@@ -2127,7 +2146,7 @@
data->pwm_acz[2] = 4; /* pwm3 -> zone3 */
/* Set VRM */
- if (data->type != sch5027) {
+ if (data->type == dme1737) {
data->vrm = vid_which_vrm();
}
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index 2a7a85a..da1b1f9 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -819,7 +819,7 @@
static ssize_t watchdog_write(struct file *filp, const char __user *buf,
size_t count, loff_t *offset)
{
- size_t ret;
+ int ret;
struct fschmd_data *data = filp->private_data;
if (count) {
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 6679854..be475e8 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -197,11 +197,13 @@
AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted),
AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
- AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("NC6730b", "HP Compaq 6730b", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("NC6730s", "HP Compaq 6730s", xy_swap),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted),
AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
+ AXIS_DMI_MATCH("NC693xx", "HP EliteBook 853", xy_swap),
/* Intel-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_I",
PRODUCT_NAME, "HP Pavilion dv5",
@@ -214,6 +216,7 @@
y_inverted),
AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted),
AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted),
+ AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index ffeb2a1..a3749cb 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1028,12 +1028,11 @@
chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
- if (chip_type != IT8705F_DEVID) {
+ if (sio_data->type != it87) {
int reg;
superio_select(GPIO);
- if ((chip_type == it8718) ||
- (chip_type == it8720))
+ if (sio_data->type == it8718 || sio_data->type == it8720)
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 680e597..ca0c46f 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -379,7 +379,8 @@
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.port_ops = &cmd64x_port_ops,
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
- IDE_HFLAG_ABUSE_PREFETCH,
+ IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_SERIALIZE,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* no udma */
@@ -389,7 +390,8 @@
.init_chipset = init_chipset_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.port_ops = &cmd648_port_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_SERIALIZE,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
diff --git a/drivers/isdn/i4l/isdn_net.h b/drivers/isdn/i4l/isdn_net.h
index 74032d0..7511f08 100644
--- a/drivers/isdn/i4l/isdn_net.h
+++ b/drivers/isdn/i4l/isdn_net.h
@@ -83,19 +83,19 @@
spin_lock_irqsave(&nd->queue_lock, flags);
lp = nd->queue; /* get lp on top of queue */
- spin_lock(&nd->queue->xmit_lock);
while (isdn_net_lp_busy(nd->queue)) {
- spin_unlock(&nd->queue->xmit_lock);
nd->queue = nd->queue->next;
if (nd->queue == lp) { /* not found -- should never happen */
lp = NULL;
goto errout;
}
- spin_lock(&nd->queue->xmit_lock);
}
lp = nd->queue;
nd->queue = nd->queue->next;
+ spin_unlock_irqrestore(&nd->queue_lock, flags);
+ spin_lock(&lp->xmit_lock);
local_bh_disable();
+ return lp;
errout:
spin_unlock_irqrestore(&nd->queue_lock, flags);
return lp;
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index e832e97..a1c47ee 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -795,7 +795,7 @@
twl->client = i2c_new_dummy(client->adapter,
twl->address);
if (!twl->client) {
- dev_err(&twl->client->dev,
+ dev_err(&client->dev,
"can't attach client %d\n", i);
status = -ENOMEM;
goto fail;
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index d3015df..ac056ea 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -507,6 +507,8 @@
{
int i, ret;
+ mutex_init(&wm831x->irq_lock);
+
if (!irq) {
dev_warn(wm831x->dev,
"No interrupt specified - functionality limited\n");
@@ -521,7 +523,6 @@
}
wm831x->irq = irq;
- mutex_init(&wm831x->irq_lock);
INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
/* Mask the individual interrupt sources */
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4487cc0..0aecaae 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2013,7 +2013,7 @@
static int __init omap_hsmmc_init(void)
{
/* Register the MMC driver */
- return platform_driver_register(&omap_hsmmc_driver);
+ return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe);
}
static void __exit omap_hsmmc_cleanup(void)
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index e1f7d0a..14cec04 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -42,6 +42,7 @@
#include <linux/log2.h>
#include <linux/kthread.h>
#include <linux/reboot.h>
+#include <linux/kernel.h>
#include "ubi.h"
/* Maximum length of the 'mtd=' parameter */
@@ -1257,7 +1258,7 @@
unsigned long result;
result = simple_strtoul(str, &endp, 0);
- if (str == endp || result < 0) {
+ if (str == endp || result >= INT_MAX) {
printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
str);
return -EINVAL;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index e7161ad..90af61a 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -794,16 +794,15 @@
* number.
*/
image_seq = be32_to_cpu(ech->image_seq);
- if (!si->image_seq_set) {
+ if (!ubi->image_seq && image_seq)
ubi->image_seq = image_seq;
- si->image_seq_set = 1;
- } else if (ubi->image_seq && ubi->image_seq != image_seq) {
+ if (ubi->image_seq && image_seq &&
+ ubi->image_seq != image_seq) {
ubi_err("bad image sequence number %d in PEB %d, "
"expected %d", image_seq, pnum, ubi->image_seq);
ubi_dbg_dump_ec_hdr(ech);
return -EINVAL;
}
-
}
/* OK, we've done with the EC header, let's look at the VID header */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index bab3169..ff179ad 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -103,7 +103,6 @@
* @ec_sum: a temporary variable used when calculating @mean_ec
* @ec_count: a temporary variable used when calculating @mean_ec
* @corr_count: count of corrupted PEBs
- * @image_seq_set: indicates @ubi->image_seq is known
*
* This data structure contains the result of scanning and may be used by other
* UBI sub-systems to build final UBI data structures, further error-recovery
@@ -127,7 +126,6 @@
uint64_t ec_sum;
int ec_count;
int corr_count;
- int image_seq_set;
};
struct ubi_device;
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 04f63c7..ce6f1ac 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -34,6 +34,7 @@
*
*
*/
+#include <linux/capability.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kernel.h>
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 6c7f795..a4d8340 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -361,9 +361,12 @@
#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28)
#define BNX2_L2CTX_HOST_BDIDX 0x00000004
-#define BNX2_L2CTX_STATUSB_NUM_SHIFT 16
-#define BNX2_L2CTX_STATUSB_NUM(sb_id) \
- (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0)
+#define BNX2_L2CTX_L5_STATUSB_NUM_SHIFT 16
+#define BNX2_L2CTX_L2_STATUSB_NUM_SHIFT 24
+#define BNX2_L2CTX_L5_STATUSB_NUM(sb_id) \
+ (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L5_STATUSB_NUM_SHIFT) : 0)
+#define BNX2_L2CTX_L2_STATUSB_NUM(sb_id) \
+ (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT) : 0)
#define BNX2_L2CTX_HOST_BSEQ 0x00000008
#define BNX2_L2CTX_NX_BSEQ 0x0000000c
#define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 69c5b15..40fb5ee 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -691,7 +691,7 @@
struct net_device *slave_dev, int reporting)
{
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
- static int (*ioctl)(struct net_device *, struct ifreq *, int);
+ int (*ioctl)(struct net_device *, struct ifreq *, int);
struct ifreq ifr;
struct mii_ioctl_data *mii;
@@ -3665,10 +3665,10 @@
if (skb->protocol == htons(ETH_P_IP)) {
return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
- (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count;
+ (data->h_dest[5] ^ data->h_source[5])) % count;
}
- return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+ return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*
@@ -3695,7 +3695,7 @@
}
- return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+ return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*
@@ -3706,7 +3706,7 @@
{
struct ethhdr *data = (struct ethhdr *)skb->data;
- return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+ return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*-------------------------- Device entry points ----------------------------*/
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 46c87ec..3bf1b04 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2264,9 +2264,9 @@
cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val);
if (sb_id == 0)
- val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT;
+ val = 2 << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT;
else
- val = BNX2_L2CTX_STATUSB_NUM(sb_id);
+ val = BNX2_L2CTX_L2_STATUSB_NUM(sb_id);
cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val);
rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE);
@@ -2423,7 +2423,7 @@
cp->int_num = 0;
if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
u32 sb_id = cp->status_blk_num;
- u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id);
+ u32 sb = BNX2_L2CTX_L5_STATUSB_NUM(sb_id);
cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT;
cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h
index 80817c2..fb1c924d 100644
--- a/drivers/net/dm9000.h
+++ b/drivers/net/dm9000.h
@@ -50,7 +50,7 @@
#define DM9000_RCSR 0x32
#define CHIPR_DM9000A 0x19
-#define CHIPR_DM9000B 0x1B
+#define CHIPR_DM9000B 0x1A
#define DM9000_MRCMDX 0xF0
#define DM9000_MRCMD 0xF2
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 981936c..405a144 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -519,9 +519,13 @@
extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
@@ -538,7 +542,11 @@
extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
@@ -546,7 +554,11 @@
extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index fd44d9f..7b05cf4 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -764,11 +764,13 @@
s32 (*get_cable_length)(struct e1000_hw *);
s32 (*get_phy_info)(struct e1000_hw *);
s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *);
+ s32 (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *);
void (*release_phy)(struct e1000_hw *);
s32 (*reset_phy)(struct e1000_hw *);
s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
s32 (*write_phy_reg)(struct e1000_hw *, u32, u16);
+ s32 (*write_phy_reg_locked)(struct e1000_hw *, u32, u16);
s32 (*cfg_on_link_up)(struct e1000_hw *);
};
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 99df2ab..b6388b9 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -122,6 +122,13 @@
#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
+#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
@@ -200,6 +207,7 @@
static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -242,7 +250,11 @@
phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan;
phy->ops.read_phy_reg = e1000_read_phy_reg_hv;
+ phy->ops.read_phy_reg_locked = e1000_read_phy_reg_hv_locked;
+ phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
+ phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
phy->ops.write_phy_reg = e1000_write_phy_reg_hv;
+ phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
phy->id = e1000_phy_unknown;
@@ -303,6 +315,8 @@
case IGP03E1000_E_PHY_ID:
phy->type = e1000_phy_igp_3;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked;
+ phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked;
break;
case IFE_E_PHY_ID:
case IFE_PLUS_E_PHY_ID:
@@ -568,12 +582,39 @@
static DEFINE_MUTEX(nvm_mutex);
/**
+ * e1000_acquire_nvm_ich8lan - Acquire NVM mutex
+ * @hw: pointer to the HW structure
+ *
+ * Acquires the mutex for performing NVM operations.
+ **/
+static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw)
+{
+ mutex_lock(&nvm_mutex);
+
+ return 0;
+}
+
+/**
+ * e1000_release_nvm_ich8lan - Release NVM mutex
+ * @hw: pointer to the HW structure
+ *
+ * Releases the mutex used while performing NVM operations.
+ **/
+static void e1000_release_nvm_ich8lan(struct e1000_hw *hw)
+{
+ mutex_unlock(&nvm_mutex);
+
+ return;
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
+/**
* e1000_acquire_swflag_ich8lan - Acquire software control flag
* @hw: pointer to the HW structure
*
- * Acquires the software control flag for performing NVM and PHY
- * operations. This is a function pointer entry point only called by
- * read/write routines for the PHY and NVM parts.
+ * Acquires the software control flag for performing PHY and select
+ * MAC CSR accesses.
**/
static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
{
@@ -582,7 +623,7 @@
might_sleep();
- mutex_lock(&nvm_mutex);
+ mutex_lock(&swflag_mutex);
while (timeout) {
extcnf_ctrl = er32(EXTCNF_CTRL);
@@ -599,7 +640,7 @@
goto out;
}
- timeout = PHY_CFG_TIMEOUT * 2;
+ timeout = SW_FLAG_TIMEOUT;
extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
@@ -623,7 +664,7 @@
out:
if (ret_val)
- mutex_unlock(&nvm_mutex);
+ mutex_unlock(&swflag_mutex);
return ret_val;
}
@@ -632,9 +673,8 @@
* e1000_release_swflag_ich8lan - Release software control flag
* @hw: pointer to the HW structure
*
- * Releases the software control flag for performing NVM and PHY operations.
- * This is a function pointer entry point only called by read/write
- * routines for the PHY and NVM parts.
+ * Releases the software control flag for performing PHY and select
+ * MAC CSR accesses.
**/
static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
{
@@ -644,7 +684,9 @@
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
- mutex_unlock(&nvm_mutex);
+ mutex_unlock(&swflag_mutex);
+
+ return;
}
/**
@@ -844,7 +886,7 @@
u32 i;
u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
s32 ret_val;
- u16 word_addr, reg_data, reg_addr, phy_page = 0;
+ u16 reg, word_addr, reg_data, reg_addr, phy_page = 0;
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
@@ -859,6 +901,10 @@
return ret_val;
}
+ /* Dummy read to clear the phy wakeup bit after lcd reset */
+ if (hw->mac.type == e1000_pchlan)
+ e1e_rphy(hw, BM_WUC, ®);
+
/*
* Initialize the PHY from the NVM on ICH platforms. This
* is needed due to an issue where the NVM configuration is
@@ -1054,6 +1100,38 @@
}
/**
+ * e1000_set_lplu_state_pchlan - Set Low Power Link Up state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU state according to the active flag. For PCH, if OEM write
+ * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set
+ * the phy speed. This function will manually set the LPLU bit and restart
+ * auto-neg as hw would do. D3 and D0 LPLU will call the same function
+ * since it configures the same bit.
+ **/
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
+{
+ s32 ret_val = 0;
+ u16 oem_reg;
+
+ ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
+ if (ret_val)
+ goto out;
+
+ if (active)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ else
+ oem_reg &= ~HV_OEM_BITS_LPLU;
+
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
+ ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg);
+
+out:
+ return ret_val;
+}
+
+/**
* e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure
* @active: TRUE to enable LPLU, FALSE to disable
@@ -1314,12 +1392,11 @@
if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
(words == 0)) {
hw_dbg(hw, "nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
+ ret_val = -E1000_ERR_NVM;
+ goto out;
}
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- if (ret_val)
- goto out;
+ nvm->ops.acquire_nvm(hw);
ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
if (ret_val) {
@@ -1345,7 +1422,7 @@
}
}
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
out:
if (ret_val)
@@ -1603,11 +1680,15 @@
return -E1000_ERR_NVM;
}
+ nvm->ops.acquire_nvm(hw);
+
for (i = 0; i < words; i++) {
dev_spec->shadow_ram[offset+i].modified = 1;
dev_spec->shadow_ram[offset+i].value = data[i];
}
+ nvm->ops.release_nvm(hw);
+
return 0;
}
@@ -1637,9 +1718,7 @@
if (nvm->type != e1000_nvm_flash_sw)
goto out;
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- if (ret_val)
- goto out;
+ nvm->ops.acquire_nvm(hw);
/*
* We're writing to the opposite bank so if we're on bank 1,
@@ -1657,7 +1736,7 @@
old_bank_offset = 0;
ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
} else {
@@ -1665,7 +1744,7 @@
new_bank_offset = 0;
ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
}
@@ -1723,7 +1802,7 @@
if (ret_val) {
/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
hw_dbg(hw, "Flash commit failed.\n");
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
@@ -1736,7 +1815,7 @@
act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
data &= 0xBFFF;
@@ -1744,7 +1823,7 @@
act_offset * 2 + 1,
(u8)(data >> 8));
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
@@ -1757,7 +1836,7 @@
act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
@@ -1767,7 +1846,7 @@
dev_spec->shadow_ram[i].value = 0xFFFF;
}
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
/*
* Reload the EEPROM, or else modifications will not appear
@@ -1831,14 +1910,12 @@
**/
void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
{
+ struct e1000_nvm_info *nvm = &hw->nvm;
union ich8_flash_protected_range pr0;
union ich8_hws_flash_status hsfsts;
u32 gfpreg;
- s32 ret_val;
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- if (ret_val)
- return;
+ nvm->ops.acquire_nvm(hw);
gfpreg = er32flash(ICH_FLASH_GFPREG);
@@ -1859,7 +1936,7 @@
hsfsts.hsf_status.flockdn = true;
ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
}
/**
@@ -2229,6 +2306,7 @@
**/
static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
{
+ u16 reg;
u32 ctrl, icr, kab;
s32 ret_val;
@@ -2304,6 +2382,9 @@
hw_dbg(hw, "Auto Read Done did not complete\n");
}
}
+ /* Dummy read to clear the phy wakeup bit after lcd reset */
+ if (hw->mac.type == e1000_pchlan)
+ e1e_rphy(hw, BM_WUC, ®);
/*
* For PCH, this write will make sure that any noise
@@ -2843,9 +2924,8 @@
E1000_PHY_CTRL_GBE_DISABLE;
ew32(PHY_CTRL, phy_ctrl);
- /* Workaround SWFLAG unexpectedly set during S0->Sx */
if (hw->mac.type == e1000_pchlan)
- udelay(500);
+ e1000_phy_hw_reset_ich8lan(hw);
default:
break;
}
@@ -3113,9 +3193,9 @@
};
static struct e1000_nvm_operations ich8_nvm_ops = {
- .acquire_nvm = e1000_acquire_swflag_ich8lan,
+ .acquire_nvm = e1000_acquire_nvm_ich8lan,
.read_nvm = e1000_read_nvm_ich8lan,
- .release_nvm = e1000_release_swflag_ich8lan,
+ .release_nvm = e1000_release_nvm_ich8lan,
.update_nvm = e1000_update_nvm_checksum_ich8lan,
.valid_led_default = e1000_valid_led_default_ich8lan,
.validate_nvm = e1000_validate_nvm_checksum_ich8lan,
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 994401f..f9d33ab 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -164,16 +164,25 @@
* MDIC mode. No harm in trying again in this case since
* the PHY ID is unknown at this point anyway
*/
+ ret_val = phy->ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
if (ret_val)
goto out;
+ phy->ops.release_phy(hw);
retry_count++;
}
out:
/* Revert to MDIO fast mode, if applicable */
- if (retry_count)
+ if (retry_count) {
+ ret_val = phy->ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ phy->ops.release_phy(hw);
+ }
return ret_val;
}
@@ -354,38 +363,117 @@
}
/**
- * e1000e_read_phy_reg_igp - Read igp PHY register
+ * __e1000e_read_phy_reg_igp - Read igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
+ * and stores the retrieved information in data. Release any acquired
* semaphores before exiting.
**/
-s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto release;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
- hw->phy.ops.release_phy(hw);
+release:
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+out:
+ return ret_val;
+}
+/**
+ * e1000e_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset and stores the
+ * retrieved information in data.
+ * Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000e_read_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ * e1000e_read_phy_reg_igp_locked - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000e_read_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ * e1000e_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
+{
+ s32 ret_val = 0;
+
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val)
+ goto release;
+ }
+
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+release:
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
+out:
return ret_val;
}
@@ -395,53 +483,53 @@
* @offset: register offset to write to
* @data: data to write at register offset
*
- * Acquires semaphore, if necessary, then writes the data to PHY register
+ * Acquires semaphore then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
{
- s32 ret_val;
-
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = e1000e_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
- }
-
- ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
- hw->phy.ops.release_phy(hw);
-
- return ret_val;
+ return __e1000e_write_phy_reg_igp(hw, offset, data, false);
}
/**
- * e1000e_read_kmrn_reg - Read kumeran register
+ * e1000e_write_phy_reg_igp_locked - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000e_write_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ * __e1000_read_kmrn_reg - Read kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary. Then reads the PHY register at offset
* using the kumeran interface. The information retrieved is stored in data.
* Release any acquired semaphores before exiting.
**/
-s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
u32 kmrnctrlsta;
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
@@ -452,41 +540,111 @@
kmrnctrlsta = er32(KMRNCTRLSTA);
*data = (u16)kmrnctrlsta;
- hw->phy.ops.release_phy(hw);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+out:
return ret_val;
}
/**
- * e1000e_write_kmrn_reg - Write kumeran register
+ * e1000e_read_kmrn_reg - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset using the
+ * kumeran interface. The information retrieved is stored in data.
+ * Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ * e1000_read_kmrn_reg_locked - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the kumeran interface. The
+ * information retrieved is stored in data.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ * __e1000_write_kmrn_reg - Write kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary. Then write the data to PHY register
* at the offset using the kumeran interface. Release any acquired semaphores
* before exiting.
**/
-s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
{
u32 kmrnctrlsta;
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
- hw->phy.ops.release_phy(hw);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
+out:
return ret_val;
}
/**
+ * e1000e_write_kmrn_reg - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to the PHY register at the offset
+ * using the kumeran interface. Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ * e1000_write_kmrn_reg_locked - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Write the data to PHY register at the offset using the kumeran interface.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_kmrn_reg(hw, offset, data, true);
+}
+
+/**
* e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
* @hw: pointer to the HW structure
*
@@ -2105,6 +2263,10 @@
u32 page = offset >> IGP_PAGE_SHIFT;
u32 page_shift = 0;
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
@@ -2112,10 +2274,6 @@
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
if (offset > MAX_PHY_MULTI_PAGE_REG) {
@@ -2135,18 +2293,15 @@
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
(page << page_shift));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
+ if (ret_val)
goto out;
- }
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
-
out:
+ hw->phy.ops.release_phy(hw);
return ret_val;
}
@@ -2167,6 +2322,10 @@
u32 page = offset >> IGP_PAGE_SHIFT;
u32 page_shift = 0;
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
@@ -2174,10 +2333,6 @@
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
if (offset > MAX_PHY_MULTI_PAGE_REG) {
@@ -2197,17 +2352,14 @@
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
(page << page_shift));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
+ if (ret_val)
goto out;
- }
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
-
out:
+ hw->phy.ops.release_phy(hw);
return ret_val;
}
@@ -2226,17 +2378,17 @@
s32 ret_val;
u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
true);
- return ret_val;
+ goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
hw->phy.addr = 1;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
@@ -2245,16 +2397,14 @@
ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
page);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
+out:
hw->phy.ops.release_phy(hw);
-
return ret_val;
}
@@ -2272,17 +2422,17 @@
s32 ret_val;
u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
false);
- return ret_val;
+ goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
hw->phy.addr = 1;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
@@ -2290,17 +2440,15 @@
ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
page);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
+out:
hw->phy.ops.release_phy(hw);
-
return ret_val;
}
@@ -2320,6 +2468,8 @@
* 3) Write the address using the address opcode (0x11)
* 4) Read or write the data using the data opcode (0x12)
* 5) Restore 769_17.2 to its original value
+ *
+ * Assumes semaphore already acquired.
**/
static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
u16 *data, bool read)
@@ -2327,20 +2477,12 @@
s32 ret_val;
u16 reg = BM_PHY_REG_NUM(offset);
u16 phy_reg = 0;
- u8 phy_acquired = 1;
-
/* Gig must be disabled for MDIO accesses to page 800 */
if ((hw->mac.type == e1000_pchlan) &&
(!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val) {
- phy_acquired = 0;
- goto out;
- }
-
/* All operations in this function are phy address 1 */
hw->phy.addr = 1;
@@ -2397,8 +2539,6 @@
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
out:
- if (phy_acquired == 1)
- hw->phy.ops.release_phy(hw);
return ret_val;
}
@@ -2439,52 +2579,63 @@
return 0;
}
+/**
+ * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ * @hw: pointer to the HW structure
+ * @slow: true for slow mode, false for normal mode
+ *
+ * Assumes semaphore already acquired.
+ **/
s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
{
s32 ret_val = 0;
u16 data = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
/* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
hw->phy.addr = 1;
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
(BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
+
ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
(0x2180 | (slow << 10)));
+ if (ret_val)
+ goto out;
/* dummy read when reverting to fast mode - throw away result */
if (!slow)
- e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
+ ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
- hw->phy.ops.release_phy(hw);
-
+out:
return ret_val;
}
/**
- * e1000_read_phy_reg_hv - Read HV PHY register
+ * __e1000_read_phy_reg_hv - Read HV PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
+ * and stores the retrieved information in data. Release any acquired
* semaphore before exiting.
**/
-s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
bool in_slow_mode = false;
+ if (!locked) {
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Workaround failure in MDIO access while cable is disconnected */
if ((hw->phy.type == e1000_phy_82577) &&
!(er32(STATUS) & E1000_STATUS_LU)) {
@@ -2508,10 +2659,6 @@
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
if (page == HV_INTC_FC_PAGE_START)
@@ -2529,42 +2676,76 @@
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(page << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- goto out;
- }
hw->phy.addr = phy_addr;
}
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
- hw->phy.ops.release_phy(hw);
-
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
return ret_val;
}
/**
- * e1000_write_phy_reg_hv - Write HV PHY register
+ * e1000_read_phy_reg_hv - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset and stores
+ * the retrieved information in data. Release the acquired semaphore
+ * before exiting.
+ **/
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, false);
+}
+
+/**
+ * e1000_read_phy_reg_hv_locked - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired.
+ **/
+s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, true);
+}
+
+/**
+ * __e1000_write_phy_reg_hv - Write HV PHY register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
bool in_slow_mode = false;
+ if (!locked) {
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Workaround failure in MDIO access while cable is disconnected */
if ((hw->phy.type == e1000_phy_82577) &&
!(er32(STATUS) & E1000_STATUS_LU)) {
@@ -2588,10 +2769,6 @@
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
if (page == HV_INTC_FC_PAGE_START)
@@ -2607,15 +2784,10 @@
((MAX_PHY_REG_ADDRESS & reg) == 0) &&
(data & (1 << 11))) {
u16 data2 = 0x7EFF;
- hw->phy.ops.release_phy(hw);
ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
&data2, false);
if (ret_val)
goto out;
-
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
}
if (reg > MAX_PHY_MULTI_PAGE_REG) {
@@ -2630,27 +2802,53 @@
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(page << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- goto out;
- }
hw->phy.addr = phy_addr;
}
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
- hw->phy.ops.release_phy(hw);
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
return ret_val;
}
/**
+ * e1000_write_phy_reg_hv - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to PHY register at the offset.
+ * Release the acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, false);
+}
+
+/**
+ * e1000_write_phy_reg_hv_locked - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset. Assumes semaphore
+ * already acquired.
+ **/
+s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, true);
+}
+
+/**
* e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
* @page: page to be accessed
**/
@@ -2671,10 +2869,9 @@
* @data: pointer to the data to be read or written
* @read: determines if operation is read or written
*
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retreived information in data. Release any acquired
- * semaphores before exiting. Note that the procedure to read these regs
- * uses the address port and data port to read/write.
+ * Reads the PHY register at offset and stores the retreived information
+ * in data. Assumes semaphore already acquired. Note that the procedure
+ * to read these regs uses the address port and data port to read/write.
**/
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
u16 *data, bool read)
@@ -2682,20 +2879,12 @@
s32 ret_val;
u32 addr_reg = 0;
u32 data_reg = 0;
- u8 phy_acquired = 1;
/* This takes care of the difference with desktop vs mobile phy */
addr_reg = (hw->phy.type == e1000_phy_82578) ?
I82578_ADDR_REG : I82577_ADDR_REG;
data_reg = addr_reg + 1;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val) {
- hw_dbg(hw, "Could not acquire PHY\n");
- phy_acquired = 0;
- goto out;
- }
-
/* All operations in this function are phy address 2 */
hw->phy.addr = 2;
@@ -2718,8 +2907,6 @@
}
out:
- if (phy_acquired == 1)
- hw->phy.ops.release_phy(hw);
return ret_val;
}
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 801f088..030913f 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -98,12 +98,13 @@
stats->tx_packets++;
stats->tx_bytes +=skb->len;
- skb->dev = __dev_get_by_index(&init_net, skb->iif);
+ skb->dev = dev_get_by_index(&init_net, skb->iif);
if (!skb->dev) {
dev_kfree_skb(skb);
stats->tx_dropped++;
break;
}
+ dev_put(skb->dev);
skb->iif = _dev->ifindex;
if (from & AT_EGRESS) {
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index deaea8f..b243ed3 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -732,7 +732,7 @@
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct igb_ring *temp_ring;
- int i, err;
+ int i, err = 0;
u32 new_rx_count, new_tx_count;
if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
@@ -752,18 +752,30 @@
return 0;
}
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i].count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i].count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto clear_reset;
+ }
+
if (adapter->num_tx_queues > adapter->num_rx_queues)
temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring));
else
temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring));
- if (!temp_ring)
- return -ENOMEM;
- while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
- msleep(1);
+ if (!temp_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
- if (netif_running(adapter->netdev))
- igb_down(adapter);
+ igb_down(adapter);
/*
* We can't just free everything and then setup again,
@@ -820,14 +832,11 @@
adapter->rx_ring_count = new_rx_count;
}
-
- err = 0;
err_setup:
- if (netif_running(adapter->netdev))
- igb_up(adapter);
-
- clear_bit(__IGB_RESETTING, &adapter->state);
+ igb_up(adapter);
vfree(temp_ring);
+clear_reset:
+ clear_bit(__IGB_RESETTING, &adapter->state);
return err;
}
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c
index ee17a09..c68265b 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/igbvf/ethtool.c
@@ -279,7 +279,7 @@
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct igbvf_ring *temp_ring;
- int err;
+ int err = 0;
u32 new_rx_count, new_tx_count;
if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
@@ -299,15 +299,22 @@
return 0;
}
- temp_ring = vmalloc(sizeof(struct igbvf_ring));
- if (!temp_ring)
- return -ENOMEM;
-
while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
msleep(1);
- if (netif_running(adapter->netdev))
- igbvf_down(adapter);
+ if (!netif_running(adapter->netdev)) {
+ adapter->tx_ring->count = new_tx_count;
+ adapter->rx_ring->count = new_rx_count;
+ goto clear_reset;
+ }
+
+ temp_ring = vmalloc(sizeof(struct igbvf_ring));
+ if (!temp_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
+
+ igbvf_down(adapter);
/*
* We can't just free everything and then setup again,
@@ -339,14 +346,11 @@
memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring));
}
-
- err = 0;
err_setup:
- if (netif_running(adapter->netdev))
- igbvf_up(adapter);
-
- clear_bit(__IGBVF_RESETTING, &adapter->state);
+ igbvf_up(adapter);
vfree(temp_ring);
+clear_reset:
+ clear_bit(__IGBVF_RESETTING, &adapter->state);
return err;
}
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index fa314cb..856c18c 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -798,7 +798,7 @@
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_ring *temp_tx_ring, *temp_rx_ring;
- int i, err;
+ int i, err = 0;
u32 new_rx_count, new_tx_count;
bool need_update = false;
@@ -822,6 +822,16 @@
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
msleep(1);
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i].count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i].count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto err_setup;
+ }
+
temp_tx_ring = kcalloc(adapter->num_tx_queues,
sizeof(struct ixgbe_ring), GFP_KERNEL);
if (!temp_tx_ring) {
@@ -879,8 +889,7 @@
/* if rings need to be updated, here's the place to do it in one shot */
if (need_update) {
- if (netif_running(netdev))
- ixgbe_down(adapter);
+ ixgbe_down(adapter);
/* tx */
if (new_tx_count != adapter->tx_ring_count) {
@@ -897,13 +906,8 @@
temp_rx_ring = NULL;
adapter->rx_ring_count = new_rx_count;
}
- }
-
- /* success! */
- err = 0;
- if (netif_running(netdev))
ixgbe_up(adapter);
-
+ }
err_setup:
clear_bit(__IXGBE_RESETTING, &adapter->state);
return err;
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 5dd7225..291a505 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -1282,6 +1282,7 @@
{ PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/
+ { PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */
{ PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */
{ 0, }
};
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 6930c87..f362451 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.5.0-1.432"
+#define MYRI10GE_VERSION_STR "1.5.1-1.451"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -1624,10 +1624,21 @@
return 0;
}
}
- if (*ptr == 'R' || *ptr == 'Q') {
- /* We've found either an XFP or quad ribbon fiber */
+ if (*ptr == '2')
+ ptr++;
+ if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
+ /* We've found either an XFP, quad ribbon fiber, or SFP+ */
cmd->port = PORT_FIBRE;
+ cmd->supported |= SUPPORTED_FIBRE;
+ cmd->advertising |= ADVERTISED_FIBRE;
+ } else {
+ cmd->port = PORT_OTHER;
}
+ if (*ptr == 'R' || *ptr == 'S')
+ cmd->transceiver = XCVR_EXTERNAL;
+ else
+ cmd->transceiver = XCVR_INTERNAL;
+
return 0;
}
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 7a71774..1c46da6 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -419,6 +419,7 @@
#define NETXEN_CRB_ROMUSB \
NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB)
#define NETXEN_CRB_I2Q NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q)
+#define NETXEN_CRB_I2C0 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2C0)
#define NETXEN_CRB_SMB NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SMB)
#define NETXEN_CRB_MAX NETXEN_PCI_CRB_WINDOW(64)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 3231400..3185a98 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -1901,22 +1901,16 @@
int netxen_nic_get_board_info(struct netxen_adapter *adapter)
{
- int offset, board_type, magic, header_version;
+ int offset, board_type, magic;
struct pci_dev *pdev = adapter->pdev;
offset = NX_FW_MAGIC_OFFSET;
if (netxen_rom_fast_read(adapter, offset, &magic))
return -EIO;
- offset = NX_HDR_VERSION_OFFSET;
- if (netxen_rom_fast_read(adapter, offset, &header_version))
- return -EIO;
-
- if (magic != NETXEN_BDINFO_MAGIC ||
- header_version != NETXEN_BDINFO_VERSION) {
- dev_err(&pdev->dev,
- "invalid board config, magic=%08x, version=%08x\n",
- magic, header_version);
+ if (magic != NETXEN_BDINFO_MAGIC) {
+ dev_err(&pdev->dev, "invalid board config, magic=%08x\n",
+ magic);
return -EIO;
}
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 91c2bc6..e40b914 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -531,6 +531,8 @@
continue;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ if (off == (NETXEN_CRB_I2C0 + 0x1c))
+ continue;
/* do not reset PCI */
if (off == (ROMUSB_GLB + 0xbc))
continue;
@@ -553,12 +555,6 @@
continue;
}
- if (off == NETXEN_ADDR_ERROR) {
- printk(KERN_ERR "%s: Err: Unknown addr: 0x%08x\n",
- netxen_nic_driver_name, buf[i].addr);
- continue;
- }
-
init_delay = 1;
/* After writing this register, HW needs time for CRB */
/* to quiet down (else crb_window returns 0xffffffff) */
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 7fc15e9..0b4a56a 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1919,6 +1919,7 @@
request_reset:
adapter->need_fw_reset = 1;
+ clear_bit(__NX_RESETTING, &adapter->state);
}
struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 7cbf6f9..2559991 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -111,9 +111,6 @@
rwlock_t hash_lock;
};
-/* to eliminate a race btw pppoe_flush_dev and pppoe_release */
-static DEFINE_SPINLOCK(flush_lock);
-
/*
* PPPoE could be in the following stages:
* 1) Discovery stage (to obtain remote MAC and Session ID)
@@ -303,45 +300,48 @@
write_lock_bh(&pn->hash_lock);
for (i = 0; i < PPPOE_HASH_SIZE; i++) {
struct pppox_sock *po = pn->hash_table[i];
+ struct sock *sk;
- while (po != NULL) {
- struct sock *sk;
- if (po->pppoe_dev != dev) {
+ while (po) {
+ while (po && po->pppoe_dev != dev) {
po = po->next;
- continue;
}
+
+ if (!po)
+ break;
+
sk = sk_pppox(po);
- spin_lock(&flush_lock);
- po->pppoe_dev = NULL;
- spin_unlock(&flush_lock);
- dev_put(dev);
/* We always grab the socket lock, followed by the
- * hash_lock, in that order. Since we should
- * hold the sock lock while doing any unbinding,
- * we need to release the lock we're holding.
- * Hold a reference to the sock so it doesn't disappear
- * as we're jumping between locks.
+ * hash_lock, in that order. Since we should hold the
+ * sock lock while doing any unbinding, we need to
+ * release the lock we're holding. Hold a reference to
+ * the sock so it doesn't disappear as we're jumping
+ * between locks.
*/
sock_hold(sk);
-
write_unlock_bh(&pn->hash_lock);
lock_sock(sk);
- if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+ if (po->pppoe_dev == dev
+ && sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
pppox_unbind_sock(sk);
sk->sk_state = PPPOX_ZOMBIE;
sk->sk_state_change(sk);
+ po->pppoe_dev = NULL;
+ dev_put(dev);
}
release_sock(sk);
sock_put(sk);
- /* Restart scan at the beginning of this hash chain.
- * While the lock was dropped the chain contents may
- * have changed.
+ /* Restart the process from the start of the current
+ * hash chain. We dropped locks so the world may have
+ * change from underneath us.
*/
+
+ BUG_ON(pppoe_pernet(dev_net(dev)) == NULL);
write_lock_bh(&pn->hash_lock);
po = pn->hash_table[i];
}
@@ -388,11 +388,16 @@
struct pppox_sock *po = pppox_sk(sk);
struct pppox_sock *relay_po;
+ /* Backlog receive. Semantics of backlog rcv preclude any code from
+ * executing in lock_sock()/release_sock() bounds; meaning sk->sk_state
+ * can't change.
+ */
+
if (sk->sk_state & PPPOX_BOUND) {
ppp_input(&po->chan, skb);
} else if (sk->sk_state & PPPOX_RELAY) {
- relay_po = get_item_by_addr(dev_net(po->pppoe_dev),
- &po->pppoe_relay);
+ relay_po = get_item_by_addr(sock_net(sk),
+ &po->pppoe_relay);
if (relay_po == NULL)
goto abort_kfree;
@@ -447,6 +452,10 @@
goto drop;
pn = pppoe_pernet(dev_net(dev));
+
+ /* Note that get_item does a sock_hold(), so sk_pppox(po)
+ * is known to be safe.
+ */
po = get_item(pn, ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
if (!po)
goto drop;
@@ -561,6 +570,7 @@
struct sock *sk = sock->sk;
struct pppox_sock *po;
struct pppoe_net *pn;
+ struct net *net = NULL;
if (!sk)
return 0;
@@ -571,44 +581,28 @@
return -EBADF;
}
+ po = pppox_sk(sk);
+
+ if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+ dev_put(po->pppoe_dev);
+ po->pppoe_dev = NULL;
+ }
+
pppox_unbind_sock(sk);
/* Signal the death of the socket. */
sk->sk_state = PPPOX_DEAD;
- /*
- * pppoe_flush_dev could lead to a race with
- * this routine so we use flush_lock to eliminate
- * such a case (we only need per-net specific data)
- */
- spin_lock(&flush_lock);
- po = pppox_sk(sk);
- if (!po->pppoe_dev) {
- spin_unlock(&flush_lock);
- goto out;
- }
- pn = pppoe_pernet(dev_net(po->pppoe_dev));
- spin_unlock(&flush_lock);
+ net = sock_net(sk);
+ pn = pppoe_pernet(net);
/*
* protect "po" from concurrent updates
* on pppoe_flush_dev
*/
- write_lock_bh(&pn->hash_lock);
+ delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote,
+ po->pppoe_ifindex);
- po = pppox_sk(sk);
- if (stage_session(po->pppoe_pa.sid))
- __delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote,
- po->pppoe_ifindex);
-
- if (po->pppoe_dev) {
- dev_put(po->pppoe_dev);
- po->pppoe_dev = NULL;
- }
-
- write_unlock_bh(&pn->hash_lock);
-
-out:
sock_orphan(sk);
sock->sk = NULL;
@@ -625,8 +619,9 @@
struct sock *sk = sock->sk;
struct sockaddr_pppox *sp = (struct sockaddr_pppox *)uservaddr;
struct pppox_sock *po = pppox_sk(sk);
- struct net_device *dev;
+ struct net_device *dev = NULL;
struct pppoe_net *pn;
+ struct net *net = NULL;
int error;
lock_sock(sk);
@@ -652,12 +647,14 @@
/* Delete the old binding */
if (stage_session(po->pppoe_pa.sid)) {
pppox_unbind_sock(sk);
+ pn = pppoe_pernet(sock_net(sk));
+ delete_item(pn, po->pppoe_pa.sid,
+ po->pppoe_pa.remote, po->pppoe_ifindex);
if (po->pppoe_dev) {
- pn = pppoe_pernet(dev_net(po->pppoe_dev));
- delete_item(pn, po->pppoe_pa.sid,
- po->pppoe_pa.remote, po->pppoe_ifindex);
dev_put(po->pppoe_dev);
+ po->pppoe_dev = NULL;
}
+
memset(sk_pppox(po) + 1, 0,
sizeof(struct pppox_sock) - sizeof(struct sock));
sk->sk_state = PPPOX_NONE;
@@ -666,16 +663,15 @@
/* Re-bind in session stage only */
if (stage_session(sp->sa_addr.pppoe.sid)) {
error = -ENODEV;
- dev = dev_get_by_name(sock_net(sk), sp->sa_addr.pppoe.dev);
+ net = sock_net(sk);
+ dev = dev_get_by_name(net, sp->sa_addr.pppoe.dev);
if (!dev)
- goto end;
+ goto err_put;
po->pppoe_dev = dev;
po->pppoe_ifindex = dev->ifindex;
- pn = pppoe_pernet(dev_net(dev));
- write_lock_bh(&pn->hash_lock);
+ pn = pppoe_pernet(net);
if (!(dev->flags & IFF_UP)) {
- write_unlock_bh(&pn->hash_lock);
goto err_put;
}
@@ -683,6 +679,7 @@
&sp->sa_addr.pppoe,
sizeof(struct pppoe_addr));
+ write_lock_bh(&pn->hash_lock);
error = __set_item(pn, po);
write_unlock_bh(&pn->hash_lock);
if (error < 0)
@@ -696,8 +693,11 @@
po->chan.ops = &pppoe_chan_ops;
error = ppp_register_net_channel(dev_net(dev), &po->chan);
- if (error)
+ if (error) {
+ delete_item(pn, po->pppoe_pa.sid,
+ po->pppoe_pa.remote, po->pppoe_ifindex);
goto err_put;
+ }
sk->sk_state = PPPOX_CONNECTED;
}
@@ -915,6 +915,14 @@
struct pppoe_hdr *ph;
int data_len = skb->len;
+ /* The higher-level PPP code (ppp_unregister_channel()) ensures the PPP
+ * xmit operations conclude prior to an unregistration call. Thus
+ * sk->sk_state cannot change, so we don't need to do lock_sock().
+ * But, we also can't do a lock_sock since that introduces a potential
+ * deadlock as we'd reverse the lock ordering used when calling
+ * ppp_unregister_channel().
+ */
+
if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
goto abort;
@@ -944,7 +952,6 @@
po->pppoe_pa.remote, NULL, data_len);
dev_queue_xmit(skb);
-
return 1;
abort:
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index e7285f0..c2383ad 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -95,6 +95,7 @@
/* Misc. stuff */
MAILBOX_COUNT = 16,
+ MAILBOX_TIMEOUT = 5,
PROC_ADDR_RDY = (1 << 31),
PROC_ADDR_R = (1 << 30),
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 48b45df..cea7531 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3916,6 +3916,7 @@
goto err_out;
}
+ pci_save_state(pdev);
qdev->reg_base =
ioremap_nocache(pci_resource_start(pdev, 1),
pci_resource_len(pdev, 1));
@@ -4070,6 +4071,33 @@
free_netdev(ndev);
}
+/* Clean up resources without touching hardware. */
+static void ql_eeh_close(struct net_device *ndev)
+{
+ int i;
+ struct ql_adapter *qdev = netdev_priv(ndev);
+
+ if (netif_carrier_ok(ndev)) {
+ netif_carrier_off(ndev);
+ netif_stop_queue(ndev);
+ }
+
+ if (test_bit(QL_ADAPTER_UP, &qdev->flags))
+ cancel_delayed_work_sync(&qdev->asic_reset_work);
+ cancel_delayed_work_sync(&qdev->mpi_reset_work);
+ cancel_delayed_work_sync(&qdev->mpi_work);
+ cancel_delayed_work_sync(&qdev->mpi_idc_work);
+ cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
+
+ for (i = 0; i < qdev->rss_ring_count; i++)
+ netif_napi_del(&qdev->rx_ring[i].napi);
+
+ clear_bit(QL_ADAPTER_UP, &qdev->flags);
+ ql_tx_ring_clean(qdev);
+ ql_free_rx_buffers(qdev);
+ ql_release_adapter_resources(qdev);
+}
+
/*
* This callback is called by the PCI subsystem whenever
* a PCI bus error is detected.
@@ -4078,17 +4106,21 @@
enum pci_channel_state state)
{
struct net_device *ndev = pci_get_drvdata(pdev);
- struct ql_adapter *qdev = netdev_priv(ndev);
- netif_device_detach(ndev);
-
- if (state == pci_channel_io_perm_failure)
+ switch (state) {
+ case pci_channel_io_normal:
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ netif_device_detach(ndev);
+ if (netif_running(ndev))
+ ql_eeh_close(ndev);
+ pci_disable_device(pdev);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ dev_err(&pdev->dev,
+ "%s: pci_channel_io_perm_failure.\n", __func__);
return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(ndev))
- ql_adapter_down(qdev);
-
- pci_disable_device(pdev);
+ }
/* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
@@ -4105,25 +4137,15 @@
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ pdev->error_state = pci_channel_io_normal;
+
+ pci_restore_state(pdev);
if (pci_enable_device(pdev)) {
QPRINTK(qdev, IFUP, ERR,
"Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
-
pci_set_master(pdev);
-
- netif_carrier_off(ndev);
- ql_adapter_reset(qdev);
-
- /* Make sure the EEPROM is good */
- memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
-
- if (!is_valid_ether_addr(ndev->perm_addr)) {
- QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
return PCI_ERS_RESULT_RECOVERED;
}
@@ -4131,17 +4153,21 @@
{
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ int err = 0;
- pci_set_master(pdev);
-
+ if (ql_adapter_reset(qdev))
+ QPRINTK(qdev, DRV, ERR, "reset FAILED!\n");
if (netif_running(ndev)) {
- if (ql_adapter_up(qdev)) {
+ err = qlge_open(ndev);
+ if (err) {
QPRINTK(qdev, IFUP, ERR,
"Device initialization failed after reset.\n");
return;
}
+ } else {
+ QPRINTK(qdev, IFUP, ERR,
+ "Device was not running prior to EEH.\n");
}
-
netif_device_attach(ndev);
}
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 99e58e3..bcf13c9 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -470,7 +470,8 @@
*/
static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
- int status, count;
+ int status;
+ unsigned long count;
/* Begin polled mode for MPI */
@@ -491,9 +492,9 @@
/* Wait for the command to complete. We loop
* here because some AEN might arrive while
* we're waiting for the mailbox command to
- * complete. If more than 5 arrive then we can
+ * complete. If more than 5 seconds expire we can
* assume something is wrong. */
- count = 5;
+ count = jiffies + HZ * MAILBOX_TIMEOUT;
do {
/* Wait for the interrupt to come in. */
status = ql_wait_mbx_cmd_cmplt(qdev);
@@ -517,15 +518,15 @@
MB_CMD_STS_GOOD) ||
((mbcp->mbox_out[0] & 0x0000f000) ==
MB_CMD_STS_INTRMDT))
- break;
- } while (--count);
+ goto done;
+ } while (time_before(jiffies, count));
- if (!count) {
- QPRINTK(qdev, DRV, ERR,
- "Timed out waiting for mailbox complete.\n");
- status = -ETIMEDOUT;
- goto end;
- }
+ QPRINTK(qdev, DRV, ERR,
+ "Timed out waiting for mailbox complete.\n");
+ status = -ETIMEDOUT;
+ goto end;
+
+done:
/* Now we can clear the interrupt condition
* and look at our status.
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 83c47d9..f98ef52 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1029,7 +1029,10 @@
spin_lock_irqsave(&tp->lock, flags);
tp->vlgrp = grp;
- if (tp->vlgrp)
+ /*
+ * Do not disable RxVlan on 8110SCd.
+ */
+ if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05))
tp->cp_cmd |= RxVlan;
else
tp->cp_cmd &= ~RxVlan;
@@ -3197,6 +3200,14 @@
}
rtl8169_init_phy(dev, tp);
+
+ /*
+ * Pretend we are using VLANs; This bypasses a nasty bug where
+ * Interrupts stop flowing on high load on 8110SCd controllers.
+ */
+ if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
+
device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
out:
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 01f9432..98bff5a 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -444,7 +444,8 @@
* the appropriate LRO method
*/
static void efx_rx_packet_lro(struct efx_channel *channel,
- struct efx_rx_buffer *rx_buf)
+ struct efx_rx_buffer *rx_buf,
+ bool checksummed)
{
struct napi_struct *napi = &channel->napi_str;
@@ -466,7 +467,8 @@
skb->len = rx_buf->len;
skb->data_len = rx_buf->len;
skb->truesize += rx_buf->len;
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb->ip_summed =
+ checksummed ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE;
napi_gro_frags(napi);
@@ -475,6 +477,7 @@
rx_buf->page = NULL;
} else {
EFX_BUG_ON_PARANOID(!rx_buf->skb);
+ EFX_BUG_ON_PARANOID(!checksummed);
napi_gro_receive(napi, rx_buf->skb);
rx_buf->skb = NULL;
@@ -570,7 +573,7 @@
}
if (likely(checksummed || rx_buf->page)) {
- efx_rx_packet_lro(channel, rx_buf);
+ efx_rx_packet_lro(channel, rx_buf, checksummed);
goto done;
}
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index f49d0800..528b912 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -30,6 +30,7 @@
#include <linux/phy.h>
#include <linux/cache.h>
#include <linux/io.h>
+#include <asm/cacheflush.h>
#include "sh_eth.h"
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 72470f7..a2b30a1 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -649,6 +649,10 @@
USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */
.driver_info = (unsigned long)&dm9601_info,
},
+ {
+ USB_DEVICE(0x0a46, 0x9000), /* DM9000E */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
{}, // END
};
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 3709d6a..05630f2 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -516,8 +516,7 @@
/* Free up any pending old buffers before queueing new ones. */
free_old_xmit_skbs(vi);
- /* Put new one in send queue and do transmit */
- __skb_queue_head(&vi->send, skb);
+ /* Try to transmit */
capacity = xmit_skb(vi, skb);
/* This can happen with OOM and indirect buffers. */
@@ -531,8 +530,17 @@
}
return NETDEV_TX_BUSY;
}
-
vi->svq->vq_ops->kick(vi->svq);
+
+ /*
+ * Put new one in send queue. You'd expect we'd need this before
+ * xmit_skb calls add_buf(), since the callback can be triggered
+ * immediately after that. But since the callback just triggers
+ * another call back here, normal network xmit locking prevents the
+ * race.
+ */
+ __skb_queue_head(&vi->send, skb);
+
/* Don't wait up for transmitted skbs to be freed. */
skb_orphan(skb);
nf_reset(skb);
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 7116a1a..abf896a 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -4790,9 +4790,8 @@
static int get_dec_u16( char *buffer, int *start, int limit ) {
u16 value;
int valid = 0;
- for( value = 0; buffer[*start] >= '0' &&
- buffer[*start] <= '9' &&
- *start < limit; (*start)++ ) {
+ for (value = 0; *start < limit && buffer[*start] >= '0' &&
+ buffer[*start] <= '9'; (*start)++) {
valid = 1;
value *= 10;
value += buffer[*start] - '0';
diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h
index 4c56187..32b66d5 100644
--- a/drivers/net/wireless/b43/leds.h
+++ b/drivers/net/wireless/b43/leds.h
@@ -1,6 +1,7 @@
#ifndef B43_LEDS_H_
#define B43_LEDS_H_
+struct b43_wl;
struct b43_wldev;
#ifdef CONFIG_B43_LEDS
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index df6b26a..86f3582 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4501,7 +4501,6 @@
cancel_work_sync(&(wl->beacon_update_trigger));
- wiphy_rfkill_stop_polling(hw->wiphy);
mutex_lock(&wl->mutex);
if (b43_status(dev) >= B43_STAT_STARTED) {
dev = b43_wireless_core_stop(dev);
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 7a3218c..ffdce6f 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -33,7 +33,8 @@
& B43_MMIO_RADIO_HWENABLED_HI_MASK))
return 1;
} else {
- if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
+ if (b43_status(dev) >= B43_STAT_STARTED &&
+ b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
& B43_MMIO_RADIO_HWENABLED_LO_MASK)
return 1;
}
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index cb8be8d..5b3672c 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -134,7 +134,7 @@
static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
{
int err = 0;
- u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
+ __le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
struct spi_message m;
struct spi_transfer reg_trans;
struct spi_transfer data_trans;
@@ -166,7 +166,7 @@
static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val)
{
- u16 buff;
+ __le16 buff;
buff = cpu_to_le16(val);
return spu_write(card, reg, (u8 *)&buff, sizeof(u16));
@@ -188,7 +188,7 @@
{
unsigned int delay;
int err = 0;
- u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
+ __le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
struct spi_message m;
struct spi_transfer reg_trans;
struct spi_transfer dummy_trans;
@@ -235,7 +235,7 @@
/* Read 16 bits from an SPI register */
static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val)
{
- u16 buf;
+ __le16 buf;
int ret;
ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
@@ -248,7 +248,7 @@
* The low 16 bits are read first. */
static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
{
- u32 buf;
+ __le32 buf;
int err;
err = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 88cd58e..1c88c2e 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2879,7 +2879,7 @@
unsigned long count, void *data)
{
static char proc_essid[33];
- int len = count;
+ unsigned int len = count;
if (len > 32)
len = 32;
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index a084077..9fe770f 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1994,7 +1994,7 @@
rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
- (skbdesc->entry->entry_idx + 1) : 0xff);
+ txdesc->key_idx : 0xff);
rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
skb->len - txdesc->l2pad);
rt2x00_set_field32(&word, TXWI_W1_PACKETID,
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index bacaa53..4b22ba5 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -97,6 +97,12 @@
}
EXPORT_SYMBOL(of_mdiobus_register);
+/* Helper function for of_phy_find_device */
+static int of_phy_match(struct device *dev, void *phy_np)
+{
+ return dev_archdata_get_node(&dev->archdata) == phy_np;
+}
+
/**
* of_phy_find_device - Give a PHY node, find the phy_device
* @phy_np: Pointer to the phy's device tree node
@@ -106,15 +112,10 @@
struct phy_device *of_phy_find_device(struct device_node *phy_np)
{
struct device *d;
- int match(struct device *dev, void *phy_np)
- {
- return dev_archdata_get_node(&dev->archdata) == phy_np;
- }
-
if (!phy_np)
return NULL;
- d = bus_find_device(&mdio_bus_type, NULL, phy_np, match);
+ d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match);
return d ? to_phy_device(d) : NULL;
}
EXPORT_SYMBOL(of_phy_find_device);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 0959430..cb1a027 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -299,17 +299,8 @@
r = bus->resource[i];
if (r == &ioport_resource || r == &iomem_resource)
continue;
- if (r && (r->flags & type_mask) == type) {
- if (!r->parent)
- return r;
- /*
- * if there is no child under that, we should release
- * and use it. don't need to reset it, pbus_size_* will
- * set it again
- */
- if (!r->child && !release_resource(r))
- return r;
- }
+ if (r && (r->flags & type_mask) == type && !r->parent)
+ return r;
}
return NULL;
}
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 4a110b7..6c4a4fc 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -1463,7 +1463,9 @@
return -ENOMEM;
}
tuple.DesiredTuple = code;
- tuple.Attributes = TUPLE_RETURN_COMMON;
+ tuple.Attributes = 0;
+ if (function == BIND_FN_ALL)
+ tuple.Attributes = TUPLE_RETURN_COMMON;
ret = pccard_get_first_tuple(s, function, &tuple);
if (ret != 0)
goto done;
@@ -1490,7 +1492,7 @@
======================================================================*/
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *info)
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info)
{
tuple_t *tuple;
cisparse_t *p;
@@ -1515,30 +1517,30 @@
count = reserved = 0;
tuple->DesiredTuple = RETURN_FIRST_TUPLE;
tuple->Attributes = TUPLE_RETURN_COMMON;
- ret = pccard_get_first_tuple(s, function, tuple);
+ ret = pccard_get_first_tuple(s, BIND_FN_ALL, tuple);
if (ret != 0)
goto done;
/* First tuple should be DEVICE; we should really have either that
or a CFTABLE_ENTRY of some sort */
if ((tuple->TupleCode == CISTPL_DEVICE) ||
- (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
dev_ok++;
/* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2
tuple, for card identification. Certain old D-Link and Linksys
cards have only a broken VERS_2 tuple; hence the bogus test. */
- if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC))
+ if ((pccard_read_tuple(s, BIND_FN_ALL, CISTPL_MANFID, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_1, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_2, p) != -ENOSPC))
ident_ok++;
if (!dev_ok && !ident_ok)
goto done;
for (count = 1; count < MAX_TUPLES; count++) {
- ret = pccard_get_next_tuple(s, function, tuple);
+ ret = pccard_get_next_tuple(s, BIND_FN_ALL, tuple);
if (ret != 0)
break;
if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) ||
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 79615e6..1f4098f 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -197,8 +197,7 @@
cisdata_t code, void *parse);
int pcmcia_replace_cis(struct pcmcia_socket *s,
const u8 *data, const size_t len);
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function,
- unsigned int *count);
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *count);
/* rsrc_mgr.c */
int pcmcia_validate_mem(struct pcmcia_socket *s);
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 9f300d3..f5b7079 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -547,7 +547,7 @@
if (!vers1)
return -ENOMEM;
- if (!pccard_read_tuple(p_dev->socket, p_dev->func,
+ if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL,
CISTPL_MANFID, &manf_id)) {
p_dev->manf_id = manf_id.manf;
p_dev->card_id = manf_id.card;
@@ -581,9 +581,9 @@
kfree(devgeo);
}
- if (!pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_VERS_1,
+ if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_VERS_1,
vers1)) {
- for (i=0; i < vers1->ns; i++) {
+ for (i = 0; i < min_t(unsigned int, 4, vers1->ns); i++) {
char *tmp;
unsigned int length;
@@ -733,7 +733,7 @@
return -EAGAIN; /* try again, but later... */
}
- ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains);
+ ret = pccard_validate_cis(s, &no_chains);
if (ret || !no_chains) {
ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n");
return -ENODEV;
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index b906abe..a4aacb8 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1053,8 +1053,8 @@
u_char map, ioctl;
debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags, io->speed,
+ (unsigned long long)io->start, (unsigned long long)io->stop);
map = io->map;
if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
(io->stop < io->start)) return -EINVAL;
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index d1d89c4..7dfbee1 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -537,8 +537,9 @@
u_char map;
debug(3, "m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#lx-%#lx)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
map = io->map;
return 0;
@@ -554,8 +555,9 @@
pcc_socket_t *t = &socket[sock];
debug(3, "m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#lx, %#x)\n", sock, map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#llx, %#x)\n", sock, map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/*
* sanity check
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index a065583..c6524f9 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -492,8 +492,9 @@
u_char map;
debug(3, "m32r-pcc: SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
map = io->map;
return 0;
@@ -515,8 +516,9 @@
#endif
debug(3, "m32r-pcc: SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#lx, %#x)\n", sock, map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#llx, %#x)\n", sock, map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/*
* sanity check
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index c69f2c4..403559b 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -975,8 +975,9 @@
#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
|| (io->stop > 0xffff) || (io->stop < io->start))
@@ -1055,8 +1056,9 @@
pcmconf8xx_t *pcmcia = s->pcmcia;
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
if ((mem->map >= PCMCIA_MEM_WIN_NO)
// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
@@ -1107,8 +1109,9 @@
}
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/* copy the struct and modify the copy */
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 32c4404..30cf71d 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -881,7 +881,7 @@
mutex_lock(&s->skt_mutex);
pcmcia_validate_mem(s);
mutex_unlock(&s->skt_mutex);
- ret = pccard_validate_cis(s, BIND_FN_ALL, &buf->cisinfo.Chains);
+ ret = pccard_validate_cis(s, &buf->cisinfo.Chains);
break;
case DS_SUSPEND_CARD:
ret = pcmcia_suspend_card(s);
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 1c39d343..70a3346 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -641,6 +641,12 @@
if ((ret = pci_enable_device(dev)))
goto err_out_free_mem;
+ if (!pci_resource_start(dev, 0)) {
+ printk(KERN_INFO "pd6729: refusing to load the driver "
+ "as the io_base is 0.\n");
+ goto err_out_free_mem;
+ }
+
printk(KERN_INFO "pd6729: Cirrus PD6729 PCI to PCMCIA Bridge "
"at 0x%llx on irq %d\n",
(unsigned long long)pci_resource_start(dev, 0), dev->irq);
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 9ca22c7..7039f3c 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -206,6 +206,7 @@
/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
+ printk("\n");
dev_printk(KERN_ERR, &s->dev,
"do_io_probe: unable to kmalloc 256 bytes");
return;
@@ -275,7 +276,7 @@
s->cis_mem.res = res;
s->cis_virt = ioremap(res->start, s->map_size);
if (s->cis_virt) {
- ret = pccard_validate_cis(s, BIND_FN_ALL, count);
+ ret = pccard_validate_cis(s, count);
/* invalidate mapping and CIS cache */
iounmap(s->cis_virt);
s->cis_virt = NULL;
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 163cf98..ef7e9e5 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -336,8 +336,9 @@
struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
unsigned short speed = map->speed;
- debug(skt, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
- map->map, map->speed, map->start, map->stop);
+ debug(skt, 2, "map %u speed %u start 0x%08llx stop 0x%08llx\n",
+ map->map, map->speed, (unsigned long long)map->start,
+ (unsigned long long)map->stop);
debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
(map->flags==0)?"<NONE>":"",
(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index ff9a3bb..78d5aab 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -300,7 +300,7 @@
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- if (pccard_validate_cis(s, BIND_FN_ALL, &chains))
+ if (pccard_validate_cis(s, &chains))
return -EIO;
if (!chains)
return -ENODATA;
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 582413f..6918849 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -732,8 +732,8 @@
u_short base, len, ioctl;
debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", psock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", psock, io->map, io->flags, io->speed,
+ (unsigned long long)io->start, (unsigned long long)io->stop);
if ((io->map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
(io->stop < io->start)) return -EINVAL;
tcic_setw(TCIC_ADDR+2, TCIC_ADR2_INDREG | (psock << TCIC_SS_SHFT));
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 0f79f3a..2889e5f 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -128,12 +128,13 @@
static void __init zfcp_init_device_setup(char *devstr)
{
char *token;
- char *str;
+ char *str, *str_saved;
char busid[ZFCP_BUS_ID_SIZE];
u64 wwpn, lun;
/* duplicate devstr and keep the original for sysfs presentation*/
- str = kmalloc(strlen(devstr) + 1, GFP_KERNEL);
+ str_saved = kmalloc(strlen(devstr) + 1, GFP_KERNEL);
+ str = str_saved;
if (!str)
return;
@@ -152,12 +153,12 @@
if (!token || strict_strtoull(token, 0, (unsigned long long *) &lun))
goto err_out;
- kfree(str);
+ kfree(str_saved);
zfcp_init_device_configure(busid, wwpn, lun);
return;
- err_out:
- kfree(str);
+err_out:
+ kfree(str_saved);
pr_err("%s is not a valid SCSI device\n", devstr);
}
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 73d366b..f73e218 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -858,10 +858,7 @@
if (fc_host_port_type(adapter->scsi_host) == FC_PORTTYPE_PTP)
return zfcp_erp_open_ptp_port(act);
if (!port->d_id) {
- zfcp_port_get(port);
- if (!queue_work(adapter->work_queue,
- &port->gid_pn_work))
- zfcp_port_put(port);
+ zfcp_fc_trigger_did_lookup(port);
return ZFCP_ERP_EXIT;
}
return zfcp_erp_port_strategy_open_port(act);
@@ -869,12 +866,11 @@
case ZFCP_ERP_STEP_PORT_OPENING:
/* D_ID might have changed during open */
if (p_status & ZFCP_STATUS_COMMON_OPEN) {
- if (port->d_id)
- return ZFCP_ERP_SUCCEEDED;
- else {
- act->step = ZFCP_ERP_STEP_PORT_CLOSING;
- return ZFCP_ERP_CONTINUES;
+ if (!port->d_id) {
+ zfcp_fc_trigger_did_lookup(port);
+ return ZFCP_ERP_EXIT;
}
+ return ZFCP_ERP_SUCCEEDED;
}
if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) {
port->d_id = 0;
@@ -889,19 +885,21 @@
static int zfcp_erp_port_strategy(struct zfcp_erp_action *erp_action)
{
struct zfcp_port *port = erp_action->port;
+ int p_status = atomic_read(&port->status);
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC)
+ if ((p_status & ZFCP_STATUS_COMMON_NOESC) &&
+ !(p_status & ZFCP_STATUS_COMMON_OPEN))
goto close_init_done;
switch (erp_action->step) {
case ZFCP_ERP_STEP_UNINITIALIZED:
zfcp_erp_port_strategy_clearstati(port);
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)
+ if (p_status & ZFCP_STATUS_COMMON_OPEN)
return zfcp_erp_port_strategy_close(erp_action);
break;
case ZFCP_ERP_STEP_PORT_CLOSING:
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)
+ if (p_status & ZFCP_STATUS_COMMON_OPEN)
return ZFCP_ERP_FAILED;
break;
}
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 629edec..b3f28de 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -96,6 +96,7 @@
extern void _zfcp_fc_scan_ports_later(struct work_struct *);
extern void zfcp_fc_incoming_els(struct zfcp_fsf_req *);
extern void zfcp_fc_port_did_lookup(struct work_struct *);
+extern void zfcp_fc_trigger_did_lookup(struct zfcp_port *);
extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *);
extern void zfcp_fc_test_link(struct zfcp_port *);
extern void zfcp_fc_link_test_work(struct work_struct *);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 722f22d..df23bce 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -361,6 +361,17 @@
}
/**
+ * zfcp_fc_trigger_did_lookup - trigger the d_id lookup using a GID_PN request
+ * @port: The zfcp_port to lookup the d_id for.
+ */
+void zfcp_fc_trigger_did_lookup(struct zfcp_port *port)
+{
+ zfcp_port_get(port);
+ if (!queue_work(port->adapter->work_queue, &port->gid_pn_work))
+ zfcp_port_put(port);
+}
+
+/**
* zfcp_fc_plogi_evaluate - evaluate PLOGI playload
* @port: zfcp_port structure
* @plogi: plogi payload
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 38a7e4a..4e41baa 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -1079,7 +1079,7 @@
/* common settings for ct/gs and els requests */
req->qtcb->bottom.support.service_class = FSF_CLASS_3;
req->qtcb->bottom.support.timeout = 2 * R_A_TOV;
- zfcp_fsf_start_timer(req, 2 * R_A_TOV + 10);
+ zfcp_fsf_start_timer(req, (2 * R_A_TOV + 10) * HZ);
return 0;
}
@@ -1475,9 +1475,16 @@
plogi = (struct fsf_plogi *) req->qtcb->bottom.support.els;
if (req->qtcb->bottom.support.els1_length >=
FSF_PLOGI_MIN_LEN) {
- if (plogi->serv_param.wwpn != port->wwpn)
+ if (plogi->serv_param.wwpn != port->wwpn) {
port->d_id = 0;
- else {
+ dev_warn(&port->adapter->ccw_device->dev,
+ "A port opened with WWPN 0x%016Lx "
+ "returned data that identifies it as "
+ "WWPN 0x%016Lx\n",
+ (unsigned long long) port->wwpn,
+ (unsigned long long)
+ plogi->serv_param.wwpn);
+ } else {
port->wwnn = plogi->serv_param.wwnn;
zfcp_fc_plogi_evaluate(port, plogi);
}
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 079a8cf..d310008 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -224,6 +224,7 @@
zfcp_erp_unit_reopen(unit, 0, "syuas_1", NULL);
zfcp_erp_wait(unit->port->adapter);
+ flush_work(&unit->scsi_work);
zfcp_unit_put(unit);
out:
mutex_unlock(&zfcp_data.config_mutex);
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index b6af63c..7d1aac3 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -1918,6 +1918,10 @@
}
size = size>>16;
size *= 4;
+ if (size > MAX_MESSAGE_SIZE) {
+ rcode = EINVAL;
+ goto cleanup;
+ }
/* Copy in the user's I2O command */
if (copy_from_user (msg, user_msg, size)) {
rcode = -EFAULT;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index c447838..0547a7f 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -317,6 +317,7 @@
out_device_destroy:
scsi_device_set_state(sdev, SDEV_DEL);
transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_dev);
put_device(&sdev->sdev_gendev);
out:
if (display_failure_msg)
@@ -957,6 +958,7 @@
if (sdev->host->hostt->slave_destroy)
sdev->host->hostt->slave_destroy(sdev);
transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_dev);
put_device(&sdev->sdev_gendev);
}
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index fde5453..5c7eb63 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -864,10 +864,6 @@
goto clean_device;
}
- /* take a reference for the sdev_dev; this is
- * released by the sdev_class .release */
- get_device(&sdev->sdev_gendev);
-
/* create queue files, which may be writable, depending on the host */
if (sdev->host->hostt->change_queue_depth)
error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw);
@@ -917,6 +913,7 @@
device_del(&sdev->sdev_gendev);
transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_dev);
put_device(&sdev->sdev_gendev);
return error;
@@ -1065,7 +1062,7 @@
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
device_initialize(&sdev->sdev_dev);
- sdev->sdev_dev.parent = &sdev->sdev_gendev;
+ sdev->sdev_dev.parent = get_device(&sdev->sdev_gendev);
sdev->sdev_dev.class = &sdev_class;
dev_set_name(&sdev->sdev_dev, "%d:%d:%d:%d",
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index e7108e7..42e8550 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1561,11 +1561,16 @@
pbn_exar_XR17C152,
pbn_exar_XR17C154,
pbn_exar_XR17C158,
+ pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
pbn_ni8430_2,
pbn_ni8430_4,
pbn_ni8430_8,
pbn_ni8430_16,
+ pbn_ADDIDATA_PCIe_1_3906250,
+ pbn_ADDIDATA_PCIe_2_3906250,
+ pbn_ADDIDATA_PCIe_4_3906250,
+ pbn_ADDIDATA_PCIe_8_3906250,
};
/*
@@ -2146,6 +2151,13 @@
.base_baud = 921600,
.uart_offset = 0x200,
},
+ [pbn_exar_ibm_saturn] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+
/*
* PA Semi PWRficient PA6T-1682M on-chip UART
*/
@@ -2185,6 +2197,37 @@
.uart_offset = 0x10,
.first_offset = 0x800,
},
+ /*
+ * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
+ */
+ [pbn_ADDIDATA_PCIe_1_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_2_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_4_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_8_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
};
static const struct pci_device_id softmodem_blacklist[] = {
@@ -2649,6 +2692,9 @@
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
pbn_b0_8_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT,
+ 0, 0, pbn_exar_ibm_saturn },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -3556,6 +3602,38 @@
0,
pbn_b0_8_115200 },
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7500,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_4_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7420,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_2_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7300,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_1_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7800,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_8_3906250 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 3551c5c..9d948bc 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1531,7 +1531,7 @@
void *data;
int ret;
- BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
+ BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
port = &atmel_ports[pdev->id];
port->backup_imr = 0;
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index d7bcd07..7ce9e9f 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -705,7 +705,7 @@
return -EINVAL;
if ((ser->irq != port->irq) ||
- (ser->io_type != SERIAL_IO_MEM) ||
+ (ser->io_type != UPIO_MEM) ||
(ser->baud_base != port->uartclk) ||
(ser->iomem_base != (void *)port->mapbase) ||
(ser->hub6 != 0))
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3335131..a18e3c5 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -223,6 +223,7 @@
config USB_GADGET_PXA25X
boolean "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+ select USB_OTG_UTILS
help
Intel's PXA 25x series XScale ARM-5TE processors include
an integrated full speed USB 1.1 device controller. The
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 4a1f1eb..28d9cf7 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -530,19 +530,22 @@
err = PTR_ERR(vqs[i]);
goto error_find;
}
+
+ if (!vp_dev->per_vq_vectors || msix_vec == VIRTIO_MSI_NO_VECTOR)
+ continue;
+
/* allocate per-vq irq if available and necessary */
- if (vp_dev->per_vq_vectors) {
- snprintf(vp_dev->msix_names[msix_vec],
- sizeof *vp_dev->msix_names,
- "%s-%s",
- dev_name(&vp_dev->vdev.dev), names[i]);
- err = request_irq(msix_vec, vring_interrupt, 0,
- vp_dev->msix_names[msix_vec],
- vqs[i]);
- if (err) {
- vp_del_vq(vqs[i]);
- goto error_find;
- }
+ snprintf(vp_dev->msix_names[msix_vec],
+ sizeof *vp_dev->msix_names,
+ "%s-%s",
+ dev_name(&vp_dev->vdev.dev), names[i]);
+ err = request_irq(vp_dev->msix_entries[msix_vec].vector,
+ vring_interrupt, 0,
+ vp_dev->msix_names[msix_vec],
+ vqs[i]);
+ if (err) {
+ vp_del_vq(vqs[i]);
+ goto error_find;
}
}
return 0;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index f536005..fbd2ecd 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -285,6 +285,9 @@
return NULL;
}
+ /* Only get used array entries after they have been exposed by host. */
+ rmb();
+
i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id;
*len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len;
diff --git a/fs/Kconfig b/fs/Kconfig
index d4bf8ca..2126078 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -135,8 +135,8 @@
config HUGETLBFS
bool "HugeTLB file system support"
- depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \
- (S390 && 64BIT) || SYS_SUPPORTS_HUGETLBFS || BROKEN
+ depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \
+ SYS_SUPPORTS_HUGETLBFS || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 9cf4b92..8bed055 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1248,8 +1248,8 @@
bd_set_size(bdev, (loff_t)bdev->bd_part->nr_sects << 9);
}
} else {
- put_disk(disk);
module_put(disk->fops->owner);
+ put_disk(disk);
disk = NULL;
if (bdev->bd_contains == bdev) {
if (bdev->bd_disk->fops->open) {
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 43003e0..b090980 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1577,7 +1577,8 @@
out_err:
if (tcp_ses) {
- kfree(tcp_ses->hostname);
+ if (!IS_ERR(tcp_ses->hostname))
+ kfree(tcp_ses->hostname);
if (tcp_ses->ssocket)
sock_release(tcp_ses->ssocket);
kfree(tcp_ses);
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 9b9d639..052f214 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -58,6 +58,11 @@
}
unlock_new_inode(tree->inode);
+ if (!HFS_I(tree->inode)->first_blocks) {
+ printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n");
+ goto free_inode;
+ }
+
mapping = tree->inode->i_mapping;
page = read_mapping_page(mapping, 0, NULL);
if (IS_ERR(page))
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 175d08e..bed78ac8 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -99,6 +99,10 @@
if (hfsplus_get_last_session(sb, &part_start, &part_size))
return -EINVAL;
+ if ((u64)part_start + part_size > 0x100000000ULL) {
+ pr_err("hfs: volumes larger than 2TB are not supported yet\n");
+ return -EINVAL;
+ }
while (1) {
bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr);
if (!bh)
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 32062c3..7cb2985 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1536,6 +1536,8 @@
old_dentry->d_parent->d_name.name, old_dentry->d_name.name,
dentry->d_parent->d_name.name, dentry->d_name.name);
+ nfs_inode_return_delegation(inode);
+
d_drop(dentry);
error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name);
if (error == 0) {
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 6c32100..e1d415e 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -457,6 +457,7 @@
};
struct rpc_task_setup task_setup_data = {
.rpc_client = NFS_CLIENT(inode),
+ .rpc_message = &msg,
.callback_ops = &nfs_write_direct_ops,
.workqueue = nfsiod_workqueue,
.flags = RPC_TASK_ASYNC,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index ed7c269..ff37454 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -72,12 +72,17 @@
/* Prevent leaks of NFSv4 errors into userland */
static int nfs4_map_errors(int err)
{
- if (err < -1000) {
+ if (err >= -1000)
+ return err;
+ switch (err) {
+ case -NFS4ERR_RESOURCE:
+ return -EREMOTEIO;
+ default:
dprintk("%s could not handle NFSv4 error %d\n",
__func__, -err);
- return -EIO;
+ break;
}
- return err;
+ return -EIO;
}
/*
@@ -3060,9 +3065,6 @@
if (time_before(clp->cl_last_renewal,timestamp))
clp->cl_last_renewal = timestamp;
spin_unlock(&clp->cl_lock);
- dprintk("%s calling put_rpccred on rpc_cred %p\n", __func__,
- task->tk_msg.rpc_cred);
- put_rpccred(task->tk_msg.rpc_cred);
}
static const struct rpc_call_ops nfs4_renew_ops = {
@@ -4877,7 +4879,6 @@
nfs41_sequence_free_slot(clp, task->tk_msg.rpc_resp);
dprintk("%s rpc_cred %p\n", __func__, task->tk_msg.rpc_cred);
- put_rpccred(task->tk_msg.rpc_cred);
kfree(task->tk_msg.rpc_argp);
kfree(task->tk_msg.rpc_resp);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 83ad47c..20b4e30 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -5681,7 +5681,6 @@
{ NFS4ERR_SERVERFAULT, -ESERVERFAULT },
{ NFS4ERR_BADTYPE, -EBADTYPE },
{ NFS4ERR_LOCKED, -EAGAIN },
- { NFS4ERR_RESOURCE, -EREMOTEIO },
{ NFS4ERR_SYMLINK, -ELOOP },
{ NFS4ERR_OP_ILLEGAL, -EOPNOTSUPP },
{ NFS4ERR_DEADLOCK, -EDEADLK },
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index c7bff4f..a65239c 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -99,7 +99,7 @@
"VmallocUsed: %8lu kB\n"
"VmallocChunk: %8lu kB\n"
#ifdef CONFIG_MEMORY_FAILURE
- "HardwareCorrupted: %8lu kB\n"
+ "HardwareCorrupted: %5lu kB\n"
#endif
,
K(i.totalram),
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 4e4276b9..5d1a3b9 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -876,7 +876,6 @@
ip->i_gdquot = NULL;
}
xfs_iput(ip, XFS_ILOCK_EXCL);
- IRELE(ip);
return 0;
}
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 44717eb..79a2340 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -291,8 +291,15 @@
int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
int cpufreq_update_policy(unsigned int cpu);
+#ifdef CONFIG_CPU_FREQ
/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */
unsigned int cpufreq_get(unsigned int cpu);
+#else
+static inline unsigned int cpufreq_get(unsigned int cpu)
+{
+ return 0;
+}
+#endif
/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */
#ifdef CONFIG_CPU_FREQ
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 6547c3c..82a9124 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -37,7 +37,6 @@
typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp);
/* Flag bits for kernel_param.flags */
-#define KPARAM_KMALLOCED 1
#define KPARAM_ISBOOL 2
struct kernel_param {
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 86257a4..b0f0f38 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -482,6 +482,9 @@
#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252
+#define PCI_SUBVENDOR_ID_IBM 0x1014
+#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT 0x03d4
+
#define PCI_VENDOR_ID_UNISYS 0x1018
#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C
@@ -2160,6 +2163,10 @@
#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D
#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E
#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7300 0x7010
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7420 0x7011
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7500 0x7012
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7800 0x7013
#define PCI_VENDOR_ID_PDC 0x15e9
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 9311505..a3baeb2 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -88,6 +88,18 @@
#define PR_TASK_PERF_EVENTS_DISABLE 31
#define PR_TASK_PERF_EVENTS_ENABLE 32
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
#define PR_MCE_KILL 33
+# define PR_MCE_KILL_CLEAR 0
+# define PR_MCE_KILL_SET 1
+
+# define PR_MCE_KILL_LATE 0
+# define PR_MCE_KILL_EARLY 1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
#endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 46e9ab3..9642c6b 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -76,11 +76,7 @@
extern void call_rcu_sched(struct rcu_head *head,
void (*func)(struct rcu_head *rcu));
-
-static inline void synchronize_rcu_expedited(void)
-{
- synchronize_sched_expedited();
-}
+extern void synchronize_rcu_expedited(void);
static inline void synchronize_rcu_bh_expedited(void)
{
diff --git a/include/linux/string.h b/include/linux/string.h
index 489019e..b850886 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -62,7 +62,7 @@
#ifndef __HAVE_ARCH_STRRCHR
extern char * strrchr(const char *,int);
#endif
-extern char * strstrip(char *);
+extern char * __must_check strstrip(char *);
#ifndef __HAVE_ARCH_STRSTR
extern char * strstr(const char *,const char *);
#endif
diff --git a/include/linux/topology.h b/include/linux/topology.h
index fc0bf3e..57e6357 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -129,7 +129,7 @@
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
- | 1*SD_PREFER_LOCAL \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
@@ -162,7 +162,7 @@
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
- | 1*SD_PREFER_LOCAL \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
diff --git a/init/Kconfig b/init/Kconfig
index 09c5c64..f515864 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -297,7 +297,7 @@
config AUDITSYSCALL
bool "Enable system-call auditing support"
- depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH)
+ depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH)
default y if SECURITY_SELINUX
help
Enable low-overhead system-call auditing infrastructure that
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index ca83b73..0249f4b 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1710,14 +1710,13 @@
return -EFAULT;
buffer[nbytes] = 0; /* nul-terminate */
- strstrip(buffer);
if (cft->write_u64) {
- u64 val = simple_strtoull(buffer, &end, 0);
+ u64 val = simple_strtoull(strstrip(buffer), &end, 0);
if (*end)
return -EINVAL;
retval = cft->write_u64(cgrp, cft, val);
} else {
- s64 val = simple_strtoll(buffer, &end, 0);
+ s64 val = simple_strtoll(strstrip(buffer), &end, 0);
if (*end)
return -EINVAL;
retval = cft->write_s64(cgrp, cft, val);
@@ -1753,8 +1752,7 @@
}
buffer[nbytes] = 0; /* nul-terminate */
- strstrip(buffer);
- retval = cft->write_string(cgrp, cft, buffer);
+ retval = cft->write_string(cgrp, cft, strstrip(buffer));
if (!retval)
retval = nbytes;
out:
diff --git a/kernel/exit.c b/kernel/exit.c
index e61891f..f7864ac 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -359,10 +359,8 @@
{
struct task_struct *curr = current->group_leader;
- if (task_session(curr) != pid) {
+ if (task_session(curr) != pid)
change_pid(curr, PIDTYPE_SID, pid);
- proc_sid_connector(curr);
- }
if (task_pgrp(curr) != pid)
change_pid(curr, PIDTYPE_PGID, pid);
diff --git a/kernel/futex.c b/kernel/futex.c
index 4949d33..642f3bb 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -150,7 +150,8 @@
*/
static inline int match_futex(union futex_key *key1, union futex_key *key2)
{
- return (key1->both.word == key2->both.word
+ return (key1 && key2
+ && key1->both.word == key2->both.word
&& key1->both.ptr == key2->both.ptr
&& key1->both.offset == key2->both.offset);
}
@@ -1028,7 +1029,6 @@
void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
struct futex_hash_bucket *hb)
{
- drop_futex_key_refs(&q->key);
get_futex_key_refs(key);
q->key = *key;
@@ -1226,6 +1226,7 @@
*/
if (ret == 1) {
WARN_ON(pi_state);
+ drop_count++;
task_count++;
ret = get_futex_value_locked(&curval2, uaddr2);
if (!ret)
@@ -1304,6 +1305,7 @@
if (ret == 1) {
/* We got the lock. */
requeue_pi_wake_futex(this, &key2, hb2);
+ drop_count++;
continue;
} else if (ret) {
/* -EDEADLK */
@@ -1791,6 +1793,7 @@
current->timer_slack_ns);
}
+retry:
/* Prepare to wait on uaddr. */
ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
if (ret)
@@ -1808,9 +1811,14 @@
goto out_put_key;
/*
- * We expect signal_pending(current), but another thread may
- * have handled it for us already.
+ * We expect signal_pending(current), but we might be the
+ * victim of a spurious wakeup as well.
*/
+ if (!signal_pending(current)) {
+ put_futex_key(fshared, &q.key);
+ goto retry;
+ }
+
ret = -ERESTARTSYS;
if (!abs_time)
goto out_put_key;
@@ -2118,9 +2126,11 @@
*/
plist_del(&q->list, &q->list.plist);
+ /* Handle spurious wakeups gracefully */
+ ret = -EAGAIN;
if (timeout && !timeout->task)
ret = -ETIMEDOUT;
- else
+ else if (signal_pending(current))
ret = -ERESTARTNOINTR;
}
return ret;
@@ -2198,6 +2208,7 @@
debug_rt_mutex_init_waiter(&rt_waiter);
rt_waiter.task = NULL;
+retry:
key2 = FUTEX_KEY_INIT;
ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
if (unlikely(ret != 0))
@@ -2292,6 +2303,9 @@
out_key2:
put_futex_key(fshared, &key2);
+ /* Spurious wakeup ? */
+ if (ret == -EAGAIN)
+ goto retry;
out:
if (to) {
hrtimer_cancel(&to->timer);
diff --git a/kernel/params.c b/kernel/params.c
index 9da58ea..d656c27 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -218,15 +218,11 @@
return -ENOSPC;
}
- if (kp->flags & KPARAM_KMALLOCED)
- kfree(*(char **)kp->arg);
-
/* This is a hack. We can't need to strdup in early boot, and we
* don't need to; this mangled commandline is preserved. */
if (slab_is_available()) {
- kp->flags |= KPARAM_KMALLOCED;
*(char **)kp->arg = kstrdup(val, GFP_KERNEL);
- if (!kp->arg)
+ if (!*(char **)kp->arg)
return -ENOMEM;
} else
*(const char **)kp->arg = val;
@@ -304,6 +300,7 @@
unsigned int min, unsigned int max,
void *elem, int elemsize,
int (*set)(const char *, struct kernel_param *kp),
+ u16 flags,
unsigned int *num)
{
int ret;
@@ -313,6 +310,7 @@
/* Get the name right for errors. */
kp.name = name;
kp.arg = elem;
+ kp.flags = flags;
/* No equals sign? */
if (!val) {
@@ -358,7 +356,8 @@
unsigned int temp_num;
return param_array(kp->name, val, 1, arr->max, arr->elem,
- arr->elemsize, arr->set, arr->num ?: &temp_num);
+ arr->elemsize, arr->set, kp->flags,
+ arr->num ?: &temp_num);
}
int param_array_get(char *buffer, struct kernel_param *kp)
@@ -605,11 +604,7 @@
void destroy_params(const struct kernel_param *params, unsigned num)
{
- unsigned int i;
-
- for (i = 0; i < num; i++)
- if (params[i].flags & KPARAM_KMALLOCED)
- kfree(*(char **)params[i].arg);
+ /* FIXME: This should free kmalloced charp parameters. It doesn't. */
}
static void __init kernel_add_sysfs_param(const char *name,
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 9d0b5c6..afb7ef3d 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -1355,7 +1355,7 @@
u64 interrupts, freq;
spin_lock(&ctx->lock);
- list_for_each_entry(event, &ctx->group_list, group_entry) {
+ list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
if (event->state != PERF_EVENT_STATE_ACTIVE)
continue;
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 705f02a..0536125 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -913,7 +913,20 @@
spin_unlock(&rnp->lock); /* irqs remain disabled. */
break;
}
- rcu_preempt_offline_tasks(rsp, rnp, rdp);
+
+ /*
+ * If there was a task blocking the current grace period,
+ * and if all CPUs have checked in, we need to propagate
+ * the quiescent state up the rcu_node hierarchy. But that
+ * is inconvenient at the moment due to deadlock issues if
+ * this should end the current grace period. So set the
+ * offlined CPU's bit in ->qsmask in order to force the
+ * next force_quiescent_state() invocation to clean up this
+ * mess in a deadlock-free manner.
+ */
+ if (rcu_preempt_offline_tasks(rsp, rnp, rdp) && !rnp->qsmask)
+ rnp->qsmask |= mask;
+
mask = rnp->grpmask;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
rnp = rnp->parent;
@@ -958,7 +971,7 @@
* Invoke any RCU callbacks that have made it to the end of their grace
* period. Thottle as specified by rdp->blimit.
*/
-static void rcu_do_batch(struct rcu_data *rdp)
+static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
{
unsigned long flags;
struct rcu_head *next, *list, **tail;
@@ -1011,6 +1024,13 @@
if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark)
rdp->blimit = blimit;
+ /* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */
+ if (rdp->qlen == 0 && rdp->qlen_last_fqs_check != 0) {
+ rdp->qlen_last_fqs_check = 0;
+ rdp->n_force_qs_snap = rsp->n_force_qs;
+ } else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark)
+ rdp->qlen_last_fqs_check = rdp->qlen;
+
local_irq_restore(flags);
/* Re-raise the RCU softirq if there are callbacks remaining. */
@@ -1224,7 +1244,7 @@
}
/* If there are callbacks ready, invoke them. */
- rcu_do_batch(rdp);
+ rcu_do_batch(rsp, rdp);
}
/*
@@ -1288,10 +1308,20 @@
rcu_start_gp(rsp, nestflag); /* releases rnp_root->lock. */
}
- /* Force the grace period if too many callbacks or too long waiting. */
- if (unlikely(++rdp->qlen > qhimark)) {
+ /*
+ * Force the grace period if too many callbacks or too long waiting.
+ * Enforce hysteresis, and don't invoke force_quiescent_state()
+ * if some other CPU has recently done so. Also, don't bother
+ * invoking force_quiescent_state() if the newly enqueued callback
+ * is the only one waiting for a grace period to complete.
+ */
+ if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
rdp->blimit = LONG_MAX;
- force_quiescent_state(rsp, 0);
+ if (rsp->n_force_qs == rdp->n_force_qs_snap &&
+ *rdp->nxttail[RCU_DONE_TAIL] != head)
+ force_quiescent_state(rsp, 0);
+ rdp->n_force_qs_snap = rsp->n_force_qs;
+ rdp->qlen_last_fqs_check = rdp->qlen;
} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
local_irq_restore(flags);
@@ -1523,6 +1553,8 @@
rdp->beenonline = 1; /* We have now been online. */
rdp->preemptable = preemptable;
rdp->passed_quiesc_completed = lastcomp - 1;
+ rdp->qlen_last_fqs_check = 0;
+ rdp->n_force_qs_snap = rsp->n_force_qs;
rdp->blimit = blimit;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index b40ac57..1823c6e 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -167,6 +167,10 @@
struct rcu_head *nxtlist;
struct rcu_head **nxttail[RCU_NEXT_SIZE];
long qlen; /* # of queued callbacks */
+ long qlen_last_fqs_check;
+ /* qlen at last check for QS forcing */
+ unsigned long n_force_qs_snap;
+ /* did other CPU force QS recently? */
long blimit; /* Upper limit on a processed batch */
#ifdef CONFIG_NO_HZ
@@ -302,9 +306,9 @@
#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
- struct rcu_node *rnp,
- struct rcu_data *rdp);
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp);
static void rcu_preempt_offline_cpu(int cpu);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
static void rcu_preempt_check_callbacks(int cpu);
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index c0cb783..ef2a58c 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -304,21 +304,25 @@
* parent is to remove the need for rcu_read_unlock_special() to
* make more than two attempts to acquire the target rcu_node's lock.
*
+ * Returns 1 if there was previously a task blocking the current grace
+ * period on the specified rcu_node structure.
+ *
* The caller must hold rnp->lock with irqs disabled.
*/
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
- struct rcu_node *rnp,
- struct rcu_data *rdp)
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp)
{
int i;
struct list_head *lp;
struct list_head *lp_root;
+ int retval = rcu_preempted_readers(rnp);
struct rcu_node *rnp_root = rcu_get_root(rsp);
struct task_struct *tp;
if (rnp == rnp_root) {
WARN_ONCE(1, "Last CPU thought to be offlined?");
- return; /* Shouldn't happen: at least one CPU online. */
+ return 0; /* Shouldn't happen: at least one CPU online. */
}
WARN_ON_ONCE(rnp != rdp->mynode &&
(!list_empty(&rnp->blocked_tasks[0]) ||
@@ -342,6 +346,8 @@
spin_unlock(&rnp_root->lock); /* irqs remain disabled */
}
}
+
+ return retval;
}
/*
@@ -393,6 +399,17 @@
EXPORT_SYMBOL_GPL(call_rcu);
/*
+ * Wait for an rcu-preempt grace period. We are supposed to expedite the
+ * grace period, but this is the crude slow compatability hack, so just
+ * invoke synchronize_rcu().
+ */
+void synchronize_rcu_expedited(void)
+{
+ synchronize_rcu();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
+
+/*
* Check to see if there is any immediate preemptable-RCU-related work
* to be done.
*/
@@ -521,12 +538,15 @@
/*
* Because preemptable RCU does not exist, it never needs to migrate
- * tasks that were blocked within RCU read-side critical sections.
+ * tasks that were blocked within RCU read-side critical sections, and
+ * such non-existent tasks cannot possibly have been blocking the current
+ * grace period.
*/
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
- struct rcu_node *rnp,
- struct rcu_data *rdp)
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp)
{
+ return 0;
}
/*
@@ -565,6 +585,16 @@
EXPORT_SYMBOL_GPL(call_rcu);
/*
+ * Wait for an rcu-preempt grace period, but make it happen quickly.
+ * But because preemptable RCU does not exist, map to rcu-sched.
+ */
+void synchronize_rcu_expedited(void)
+{
+ synchronize_sched_expedited();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
+
+/*
* Because preemptable RCU does not exist, it never has any work to do.
*/
static int rcu_preempt_pending(int cpu)
diff --git a/kernel/sched.c b/kernel/sched.c
index e886895..a455dca 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1564,11 +1564,7 @@
#ifdef CONFIG_FAIR_GROUP_SCHED
-struct update_shares_data {
- unsigned long rq_weight[NR_CPUS];
-};
-
-static DEFINE_PER_CPU(struct update_shares_data, update_shares_data);
+static __read_mostly unsigned long *update_shares_data;
static void __set_se_shares(struct sched_entity *se, unsigned long shares);
@@ -1578,12 +1574,12 @@
static void update_group_shares_cpu(struct task_group *tg, int cpu,
unsigned long sd_shares,
unsigned long sd_rq_weight,
- struct update_shares_data *usd)
+ unsigned long *usd_rq_weight)
{
unsigned long shares, rq_weight;
int boost = 0;
- rq_weight = usd->rq_weight[cpu];
+ rq_weight = usd_rq_weight[cpu];
if (!rq_weight) {
boost = 1;
rq_weight = NICE_0_LOAD;
@@ -1618,7 +1614,7 @@
static int tg_shares_up(struct task_group *tg, void *data)
{
unsigned long weight, rq_weight = 0, shares = 0;
- struct update_shares_data *usd;
+ unsigned long *usd_rq_weight;
struct sched_domain *sd = data;
unsigned long flags;
int i;
@@ -1627,11 +1623,11 @@
return 0;
local_irq_save(flags);
- usd = &__get_cpu_var(update_shares_data);
+ usd_rq_weight = per_cpu_ptr(update_shares_data, smp_processor_id());
for_each_cpu(i, sched_domain_span(sd)) {
weight = tg->cfs_rq[i]->load.weight;
- usd->rq_weight[i] = weight;
+ usd_rq_weight[i] = weight;
/*
* If there are currently no tasks on the cpu pretend there
@@ -1652,7 +1648,7 @@
shares = tg->shares;
for_each_cpu(i, sched_domain_span(sd))
- update_group_shares_cpu(tg, i, shares, rq_weight, usd);
+ update_group_shares_cpu(tg, i, shares, rq_weight, usd_rq_weight);
local_irq_restore(flags);
@@ -9407,6 +9403,10 @@
#endif /* CONFIG_USER_SCHED */
#endif /* CONFIG_GROUP_SCHED */
+#if defined CONFIG_FAIR_GROUP_SCHED && defined CONFIG_SMP
+ update_shares_data = __alloc_percpu(nr_cpu_ids * sizeof(unsigned long),
+ __alignof__(unsigned long));
+#endif
for_each_possible_cpu(i) {
struct rq *rq;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 4e777b4..c32c3e6 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -861,12 +861,21 @@
static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq)
{
struct sched_entity *se = __pick_next_entity(cfs_rq);
+ struct sched_entity *buddy;
- if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, se) < 1)
- return cfs_rq->next;
+ if (cfs_rq->next) {
+ buddy = cfs_rq->next;
+ cfs_rq->next = NULL;
+ if (wakeup_preempt_entity(buddy, se) < 1)
+ return buddy;
+ }
- if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, se) < 1)
- return cfs_rq->last;
+ if (cfs_rq->last) {
+ buddy = cfs_rq->last;
+ cfs_rq->last = NULL;
+ if (wakeup_preempt_entity(buddy, se) < 1)
+ return buddy;
+ }
return se;
}
@@ -1654,16 +1663,6 @@
do {
se = pick_next_entity(cfs_rq);
- /*
- * If se was a buddy, clear it so that it will have to earn
- * the favour again.
- *
- * If se was not a buddy, clear the buddies because neither
- * was elegible to run, let them earn it again.
- *
- * IOW. unconditionally clear buddies.
- */
- __clear_buddies(cfs_rq, NULL);
set_next_entity(cfs_rq, se);
cfs_rq = group_cfs_rq(se);
} while (cfs_rq);
diff --git a/kernel/sys.c b/kernel/sys.c
index 255475d..ce17760 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1110,6 +1110,8 @@
err = session;
out:
write_unlock_irq(&tasklist_lock);
+ if (err > 0)
+ proc_sid_connector(group_leader);
return err;
}
@@ -1546,24 +1548,37 @@
if (arg4 | arg5)
return -EINVAL;
switch (arg2) {
- case 0:
+ case PR_MCE_KILL_CLEAR:
if (arg3 != 0)
return -EINVAL;
current->flags &= ~PF_MCE_PROCESS;
break;
- case 1:
+ case PR_MCE_KILL_SET:
current->flags |= PF_MCE_PROCESS;
- if (arg3 != 0)
+ if (arg3 == PR_MCE_KILL_EARLY)
current->flags |= PF_MCE_EARLY;
- else
+ else if (arg3 == PR_MCE_KILL_LATE)
current->flags &= ~PF_MCE_EARLY;
+ else if (arg3 == PR_MCE_KILL_DEFAULT)
+ current->flags &=
+ ~(PF_MCE_EARLY|PF_MCE_PROCESS);
+ else
+ return -EINVAL;
break;
default:
return -EINVAL;
}
error = 0;
break;
-
+ case PR_MCE_KILL_GET:
+ if (arg2 | arg3 | arg4 | arg5)
+ return -EINVAL;
+ if (current->flags & PF_MCE_PROCESS)
+ error = (current->flags & PF_MCE_EARLY) ?
+ PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
+ else
+ error = PR_MCE_KILL_DEFAULT;
+ break;
default:
error = -EINVAL;
break;
diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index b38423c..b6e7aaea 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -1521,7 +1521,7 @@
if (!table->ctl_name && table->strategy)
set_fail(&fail, table, "Strategy without ctl_name");
#endif
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
if (table->procname && !table->proc_handler)
set_fail(&fail, table, "No proc_handler");
#endif
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 47cdd7e..1232814 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -685,21 +685,38 @@
int schedule_on_each_cpu(work_func_t func)
{
int cpu;
+ int orig = -1;
struct work_struct *works;
works = alloc_percpu(struct work_struct);
if (!works)
return -ENOMEM;
+ /*
+ * when running in keventd don't schedule a work item on itself.
+ * Can just call directly because the work queue is already bound.
+ * This also is faster.
+ * Make this a generic parameter for other workqueues?
+ */
+ if (current_is_keventd()) {
+ orig = raw_smp_processor_id();
+ INIT_WORK(per_cpu_ptr(works, orig), func);
+ func(per_cpu_ptr(works, orig));
+ }
+
get_online_cpus();
for_each_online_cpu(cpu) {
struct work_struct *work = per_cpu_ptr(works, cpu);
+ if (cpu == orig)
+ continue;
INIT_WORK(work, func);
schedule_work_on(cpu, work);
}
- for_each_online_cpu(cpu)
- flush_work(per_cpu_ptr(works, cpu));
+ for_each_online_cpu(cpu) {
+ if (cpu != orig)
+ flush_work(per_cpu_ptr(works, cpu));
+ }
put_online_cpus();
free_percpu(works);
return 0;
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 30df586..234ceb1 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -392,7 +392,7 @@
config DEBUG_PREEMPT
bool "Debug preemptible kernel"
- depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)
+ depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT
default y
help
If you say Y here then the kernel will use a debug variant of the
diff --git a/mm/Kconfig b/mm/Kconfig
index 57963c6..fd33862 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -67,7 +67,7 @@
config SPARSEMEM
def_bool y
- depends on SPARSEMEM_MANUAL
+ depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
config FLATMEM
def_bool y
@@ -129,7 +129,7 @@
bool "Allow for memory hot-add"
depends on SPARSEMEM || X86_64_ACPI_NUMA
depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG
- depends on (IA64 || X86 || PPC64 || SUPERH || S390)
+ depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
comment "Memory hotplug is currently incompatible with Software Suspend"
depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 5a37e20..1065b71 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -610,6 +610,21 @@
kthread_stop(wb->task);
}
+/*
+ * This bdi is going away now, make sure that no super_blocks point to it
+ */
+static void bdi_prune_sb(struct backing_dev_info *bdi)
+{
+ struct super_block *sb;
+
+ spin_lock(&sb_lock);
+ list_for_each_entry(sb, &super_blocks, s_list) {
+ if (sb->s_bdi == bdi)
+ sb->s_bdi = NULL;
+ }
+ spin_unlock(&sb_lock);
+}
+
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
@@ -682,6 +697,7 @@
spin_unlock(&inode_lock);
}
+ bdi_prune_sb(bdi);
bdi_unregister(bdi);
for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 729d4b1..dacc641 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -35,6 +35,7 @@
#include <linux/mm.h>
#include <linux/page-flags.h>
#include <linux/sched.h>
+#include <linux/ksm.h>
#include <linux/rmap.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
@@ -370,9 +371,6 @@
int ret = FAILED;
struct address_space *mapping;
- if (!isolate_lru_page(p))
- page_cache_release(p);
-
/*
* For anonymous pages we're done the only reference left
* should be the one m_f() holds.
@@ -498,30 +496,18 @@
*/
static int me_swapcache_dirty(struct page *p, unsigned long pfn)
{
- int ret = FAILED;
-
ClearPageDirty(p);
/* Trigger EIO in shmem: */
ClearPageUptodate(p);
- if (!isolate_lru_page(p)) {
- page_cache_release(p);
- ret = DELAYED;
- }
-
- return ret;
+ return DELAYED;
}
static int me_swapcache_clean(struct page *p, unsigned long pfn)
{
- int ret = FAILED;
-
- if (!isolate_lru_page(p)) {
- page_cache_release(p);
- ret = RECOVERED;
- }
delete_from_swap_cache(p);
- return ret;
+
+ return RECOVERED;
}
/*
@@ -611,8 +597,6 @@
{ 0, 0, "unknown page state", me_unknown },
};
-#undef lru
-
static void action_result(unsigned long pfn, char *msg, int result)
{
struct page *page = NULL;
@@ -629,13 +613,16 @@
unsigned long pfn, int ref)
{
int result;
+ int count;
result = ps->action(p, pfn);
action_result(pfn, ps->msg, result);
- if (page_count(p) != 1 + ref)
+
+ count = page_count(p) - 1 - ref;
+ if (count != 0)
printk(KERN_ERR
"MCE %#lx: %s page still referenced by %d users\n",
- pfn, ps->msg, page_count(p) - 1);
+ pfn, ps->msg, count);
/* Could do more checks here if page looks ok */
/*
@@ -661,12 +648,9 @@
int i;
int kill = 1;
- if (PageReserved(p) || PageCompound(p) || PageSlab(p))
+ if (PageReserved(p) || PageCompound(p) || PageSlab(p) || PageKsm(p))
return;
- if (!PageLRU(p))
- lru_add_drain_all();
-
/*
* This check implies we don't kill processes if their pages
* are in the swap cache early. Those are always late kills.
@@ -738,6 +722,7 @@
int __memory_failure(unsigned long pfn, int trapno, int ref)
{
+ unsigned long lru_flag;
struct page_state *ps;
struct page *p;
int res;
@@ -775,6 +760,24 @@
}
/*
+ * We ignore non-LRU pages for good reasons.
+ * - PG_locked is only well defined for LRU pages and a few others
+ * - to avoid races with __set_page_locked()
+ * - to avoid races with __SetPageSlab*() (and more non-atomic ops)
+ * The check (unnecessarily) ignores LRU pages being isolated and
+ * walked by the page reclaim code, however that's not a big loss.
+ */
+ if (!PageLRU(p))
+ lru_add_drain_all();
+ lru_flag = p->flags & lru;
+ if (isolate_lru_page(p)) {
+ action_result(pfn, "non LRU", IGNORED);
+ put_page(p);
+ return -EBUSY;
+ }
+ page_cache_release(p);
+
+ /*
* Lock the page and wait for writeback to finish.
* It's very difficult to mess with pages currently under IO
* and in many cases impossible, so we just avoid it here.
@@ -790,7 +793,7 @@
/*
* Torn down by someone else?
*/
- if (PageLRU(p) && !PageSwapCache(p) && p->mapping == NULL) {
+ if ((lru_flag & lru) && !PageSwapCache(p) && p->mapping == NULL) {
action_result(pfn, "already truncated LRU", IGNORED);
res = 0;
goto out;
@@ -798,7 +801,7 @@
res = -EBUSY;
for (ps = error_states;; ps++) {
- if ((p->flags & ps->mask) == ps->res) {
+ if (((p->flags | lru_flag)& ps->mask) == ps->res) {
res = page_action(ps, p, pfn, ref);
break;
}
diff --git a/mm/memory.c b/mm/memory.c
index 7e91b5f..6ab19dd 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -641,6 +641,7 @@
pmd_t *dst_pmd, pmd_t *src_pmd, struct vm_area_struct *vma,
unsigned long addr, unsigned long end)
{
+ pte_t *orig_src_pte, *orig_dst_pte;
pte_t *src_pte, *dst_pte;
spinlock_t *src_ptl, *dst_ptl;
int progress = 0;
@@ -654,6 +655,8 @@
src_pte = pte_offset_map_nested(src_pmd, addr);
src_ptl = pte_lockptr(src_mm, src_pmd);
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
+ orig_src_pte = src_pte;
+ orig_dst_pte = dst_pte;
arch_enter_lazy_mmu_mode();
do {
@@ -677,9 +680,9 @@
arch_leave_lazy_mmu_mode();
spin_unlock(src_ptl);
- pte_unmap_nested(src_pte - 1);
+ pte_unmap_nested(orig_src_pte);
add_mm_rss(dst_mm, rss[0], rss[1]);
- pte_unmap_unlock(dst_pte - 1, dst_ptl);
+ pte_unmap_unlock(orig_dst_pte, dst_ptl);
cond_resched();
if (addr != end)
goto again;
@@ -1820,10 +1823,10 @@
token = pmd_pgtable(*pmd);
do {
- err = fn(pte, token, addr, data);
+ err = fn(pte++, token, addr, data);
if (err)
break;
- } while (pte++, addr += PAGE_SIZE, addr != end);
+ } while (addr += PAGE_SIZE, addr != end);
arch_leave_lazy_mmu_mode();
@@ -2539,7 +2542,7 @@
} else if (PageHWPoison(page)) {
ret = VM_FAULT_HWPOISON;
delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
- goto out;
+ goto out_release;
}
lock_page(page);
@@ -2611,6 +2614,7 @@
pte_unmap_unlock(page_table, ptl);
out_page:
unlock_page(page);
+out_release:
page_cache_release(page);
return ret;
}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 7dd9d9f..4545d59 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1024,7 +1024,7 @@
err = migrate_prep();
if (err)
- return err;
+ goto mpol_out;
}
{
NODEMASK_SCRATCH(scratch);
@@ -1039,10 +1039,9 @@
err = -ENOMEM;
NODEMASK_SCRATCH_FREE(scratch);
}
- if (err) {
- mpol_put(new);
- return err;
- }
+ if (err)
+ goto mpol_out;
+
vma = check_range(mm, start, end, nmask,
flags | MPOL_MF_INVERT, &pagelist);
@@ -1058,9 +1057,11 @@
if (!err && nr_failed && (flags & MPOL_MF_STRICT))
err = -EIO;
- }
+ } else
+ putback_lru_pages(&pagelist);
up_write(&mm->mmap_sem);
+ mpol_out:
mpol_put(new);
return err;
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index bf72055..cdcedf6 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2183,7 +2183,7 @@
printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n"
" active_file:%lu inactive_file:%lu isolated_file:%lu\n"
" unevictable:%lu"
- " dirty:%lu writeback:%lu unstable:%lu buffer:%lu\n"
+ " dirty:%lu writeback:%lu unstable:%lu\n"
" free:%lu slab_reclaimable:%lu slab_unreclaimable:%lu\n"
" mapped:%lu shmem:%lu pagetables:%lu bounce:%lu\n",
global_page_state(NR_ACTIVE_ANON),
@@ -2196,7 +2196,6 @@
global_page_state(NR_FILE_DIRTY),
global_page_state(NR_WRITEBACK),
global_page_state(NR_UNSTABLE_NFS),
- nr_blockdev_pages(),
global_page_state(NR_FREE_PAGES),
global_page_state(NR_SLAB_RECLAIMABLE),
global_page_state(NR_SLAB_UNRECLAIMABLE),
diff --git a/mm/percpu.c b/mm/percpu.c
index 6af78c1e..d907971 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -153,7 +153,10 @@
*
* During allocation, pcpu_alloc_mutex is kept locked all the time and
* pcpu_lock is grabbed and released as necessary. All actual memory
- * allocations are done using GFP_KERNEL with pcpu_lock released.
+ * allocations are done using GFP_KERNEL with pcpu_lock released. In
+ * general, percpu memory can't be allocated with irq off but
+ * irqsave/restore are still used in alloc path so that it can be used
+ * from early init path - sched_init() specifically.
*
* Free path accesses and alters only the index data structures, so it
* can be safely called from atomic context. When memory needs to be
@@ -366,7 +369,7 @@
* RETURNS:
* 0 if noop, 1 if successfully extended, -errno on failure.
*/
-static int pcpu_extend_area_map(struct pcpu_chunk *chunk)
+static int pcpu_extend_area_map(struct pcpu_chunk *chunk, unsigned long *flags)
{
int new_alloc;
int *new;
@@ -376,7 +379,7 @@
if (chunk->map_alloc >= chunk->map_used + 2)
return 0;
- spin_unlock_irq(&pcpu_lock);
+ spin_unlock_irqrestore(&pcpu_lock, *flags);
new_alloc = PCPU_DFL_MAP_ALLOC;
while (new_alloc < chunk->map_used + 2)
@@ -384,7 +387,7 @@
new = pcpu_mem_alloc(new_alloc * sizeof(new[0]));
if (!new) {
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, *flags);
return -ENOMEM;
}
@@ -393,7 +396,7 @@
* could have happened inbetween, so map_used couldn't have
* grown.
*/
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, *flags);
BUG_ON(new_alloc < chunk->map_used + 2);
size = chunk->map_alloc * sizeof(chunk->map[0]);
@@ -1047,6 +1050,7 @@
struct pcpu_chunk *chunk;
const char *err;
int slot, off;
+ unsigned long flags;
if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) {
WARN(true, "illegal size (%zu) or align (%zu) for "
@@ -1055,13 +1059,13 @@
}
mutex_lock(&pcpu_alloc_mutex);
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, flags);
/* serve reserved allocations from the reserved chunk if available */
if (reserved && pcpu_reserved_chunk) {
chunk = pcpu_reserved_chunk;
if (size > chunk->contig_hint ||
- pcpu_extend_area_map(chunk) < 0) {
+ pcpu_extend_area_map(chunk, &flags) < 0) {
err = "failed to extend area map of reserved chunk";
goto fail_unlock;
}
@@ -1079,7 +1083,7 @@
if (size > chunk->contig_hint)
continue;
- switch (pcpu_extend_area_map(chunk)) {
+ switch (pcpu_extend_area_map(chunk, &flags)) {
case 0:
break;
case 1:
@@ -1096,7 +1100,7 @@
}
/* hmmm... no space left, create a new chunk */
- spin_unlock_irq(&pcpu_lock);
+ spin_unlock_irqrestore(&pcpu_lock, flags);
chunk = alloc_pcpu_chunk();
if (!chunk) {
@@ -1104,16 +1108,16 @@
goto fail_unlock_mutex;
}
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, flags);
pcpu_chunk_relocate(chunk, -1);
goto restart;
area_found:
- spin_unlock_irq(&pcpu_lock);
+ spin_unlock_irqrestore(&pcpu_lock, flags);
/* populate, map and clear the area */
if (pcpu_populate_chunk(chunk, off, size)) {
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, flags);
pcpu_free_area(chunk, off);
err = "failed to populate";
goto fail_unlock;
@@ -1125,7 +1129,7 @@
return __addr_to_pcpu_ptr(chunk->base_addr + off);
fail_unlock:
- spin_unlock_irq(&pcpu_lock);
+ spin_unlock_irqrestore(&pcpu_lock, flags);
fail_unlock_mutex:
mutex_unlock(&pcpu_alloc_mutex);
if (warn_limit) {
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 64e43889..777af57 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -544,6 +544,16 @@
*/
lru = LRU_UNEVICTABLE;
add_page_to_unevictable_list(page);
+ /*
+ * When racing with an mlock clearing (page is
+ * unlocked), make sure that if the other thread does
+ * not observe our setting of PG_lru and fails
+ * isolation, we see PG_mlocked cleared below and move
+ * the page back to the evictable list.
+ *
+ * The other side is TestClearPageMlocked().
+ */
+ smp_mb();
}
/*
@@ -1088,7 +1098,7 @@
int lumpy_reclaim = 0;
while (unlikely(too_many_isolated(zone, file, sc))) {
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/* We are about to die and free our memory. Return now. */
if (fatal_signal_pending(current))
@@ -1356,7 +1366,7 @@
* IO, plus JVM can create lots of anon VM_EXEC pages,
* so we ignore them here.
*/
- if ((vm_flags & VM_EXEC) && !PageAnon(page)) {
+ if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) {
list_add(&page->lru, &l_active);
continue;
}
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 86acdba..6eb8d47 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -335,6 +335,7 @@
__u32 cur_src_mac_offset;
__be32 cur_saddr;
__be32 cur_daddr;
+ __u16 ip_id;
__u16 cur_udp_dst;
__u16 cur_udp_src;
__u16 cur_queue_map;
@@ -2630,6 +2631,8 @@
iph->protocol = IPPROTO_UDP; /* UDP */
iph->saddr = pkt_dev->cur_saddr;
iph->daddr = pkt_dev->cur_daddr;
+ iph->id = htons(pkt_dev->ip_id);
+ pkt_dev->ip_id++;
iph->frag_off = 0;
iplen = 20 + 8 + datalen;
iph->tot_len = htons(iplen);
@@ -2641,24 +2644,26 @@
skb->dev = odev;
skb->pkt_type = PACKET_HOST;
- if (pkt_dev->nfrags <= 0)
+ if (pkt_dev->nfrags <= 0) {
pgh = (struct pktgen_hdr *)skb_put(skb, datalen);
- else {
+ memset(pgh + 1, 0, datalen - sizeof(struct pktgen_hdr));
+ } else {
int frags = pkt_dev->nfrags;
- int i;
+ int i, len;
pgh = (struct pktgen_hdr *)(((char *)(udph)) + 8);
if (frags > MAX_SKB_FRAGS)
frags = MAX_SKB_FRAGS;
if (datalen > frags * PAGE_SIZE) {
- skb_put(skb, datalen - frags * PAGE_SIZE);
+ len = datalen - frags * PAGE_SIZE;
+ memset(skb_put(skb, len), 0, len);
datalen = frags * PAGE_SIZE;
}
i = 0;
while (datalen > 0) {
- struct page *page = alloc_pages(GFP_KERNEL, 0);
+ struct page *page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0);
skb_shinfo(skb)->frags[i].page = page;
skb_shinfo(skb)->frags[i].page_offset = 0;
skb_shinfo(skb)->frags[i].size =
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 757c917..ab996f9 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -352,13 +352,24 @@
skb->ip_summed = CHECKSUM_NONE;
skb->transport_header = skb->network_header;
- err = memcpy_fromiovecend((void *)iph, from, 0, length);
- if (err)
- goto error_fault;
+ err = -EFAULT;
+ if (memcpy_fromiovecend((void *)iph, from, 0, length))
+ goto error_free;
- /* We don't modify invalid header */
iphlen = iph->ihl * 4;
- if (iphlen >= sizeof(*iph) && iphlen <= length) {
+
+ /*
+ * We don't want to modify the ip header, but we do need to
+ * be sure that it won't cause problems later along the network
+ * stack. Specifically we want to make sure that iph->ihl is a
+ * sane value. If ihl points beyond the length of the buffer passed
+ * in, reject the frame as invalid
+ */
+ err = -EINVAL;
+ if (iphlen > length)
+ goto error_free;
+
+ if (iphlen >= sizeof(*iph)) {
if (!iph->saddr)
iph->saddr = rt->rt_src;
iph->check = 0;
@@ -381,8 +392,7 @@
out:
return 0;
-error_fault:
- err = -EFAULT;
+error_free:
kfree_skb(skb);
error:
IP_INC_STATS(net, IPSTATS_MIB_OUTDISCARDS);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 90b2e06..98440ad 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1442,9 +1442,9 @@
goto found_ok_skb;
if (tcp_hdr(skb)->fin)
goto found_fin_ok;
- if (WARN_ON(!(flags & MSG_PEEK)))
- printk(KERN_INFO "recvmsg bug 2: copied %X "
- "seq %X\n", *seq, TCP_SKB_CB(skb)->seq);
+ WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: "
+ "copied %X seq %X\n", *seq,
+ TCP_SKB_CB(skb)->seq);
}
/* Well, if we have backlog, try to process it now yet. */
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 6eaf698..ca8ecce 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -538,13 +538,12 @@
WLAN_CAPABILITY_PRIVACY,
capability);
+ if (bss) {
#ifdef CONFIG_MAC80211_IBSS_DEBUG
- if (bss)
printk(KERN_DEBUG " sta_find_ibss: selected %pM current "
"%pM\n", bss->cbss.bssid, ifibss->bssid);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
- if (bss && !memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) {
printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM"
" based on configured SSID\n",
sdata->dev->name, bss->cbss.bssid);
@@ -552,8 +551,7 @@
ieee80211_sta_join_ibss(sdata, bss);
ieee80211_rx_bss_put(local, bss);
return;
- } else if (bss)
- ieee80211_rx_bss_put(local, bss);
+ }
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG " did not try to join ibss\n");
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index e12a786..29b82e9 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -259,7 +259,7 @@
* @hwmp_ie: hwmp information element (PREP or PREQ)
*
* This function updates the path routing information to the originator and the
- * transmitter of a HWMP PREQ or PREP fram.
+ * transmitter of a HWMP PREQ or PREP frame.
*
* Returns: metric to frame originator or 0 if the frame should not be further
* processed
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 8d26e9b..dc5049d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1457,8 +1457,7 @@
if (status_code != WLAN_STATUS_SUCCESS) {
printk(KERN_DEBUG "%s: AP denied association (code=%d)\n",
sdata->dev->name, status_code);
- list_del(&wk->list);
- kfree(wk);
+ wk->state = IEEE80211_MGD_STATE_IDLE;
return RX_MGMT_CFG80211_ASSOC;
}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index db4bda6..eaa4118 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1445,7 +1445,7 @@
if (tmp_sdata->vif.type != NL80211_IFTYPE_AP)
continue;
if (compare_ether_addr(tmp_sdata->dev->dev_addr,
- hdr->addr2)) {
+ hdr->addr2) == 0) {
dev_hold(tmp_sdata->dev);
dev_put(sdata->dev);
sdata = tmp_sdata;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index d7ecca0..f2d116a 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -982,10 +982,7 @@
goto out_put;
size_max = po->tx_ring.frame_size
- - sizeof(struct skb_shared_info)
- - po->tp_hdrlen
- - LL_ALLOCATED_SPACE(dev)
- - sizeof(struct sockaddr_ll);
+ - (po->tp_hdrlen - sizeof(struct sockaddr_ll));
if (size_max > dev->mtu + reserve)
size_max = dev->mtu + reserve;
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 2a33d8b..68b3219 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -358,6 +358,7 @@
struct wireless_dev *wdev);
void cfg80211_conn_work(struct work_struct *work);
+void cfg80211_sme_failed_assoc(struct wireless_dev *wdev);
bool cfg80211_sme_failed_reassoc(struct wireless_dev *wdev);
/* internal helpers */
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 79d2eec..0a6b7a0 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -62,6 +62,7 @@
u8 *ie = mgmt->u.assoc_resp.variable;
int i, ieoffs = offsetof(struct ieee80211_mgmt, u.assoc_resp.variable);
struct cfg80211_internal_bss *bss = NULL;
+ bool need_connect_result = true;
wdev_lock(wdev);
@@ -94,6 +95,14 @@
}
WARN_ON(!bss);
+ } else if (wdev->conn) {
+ cfg80211_sme_failed_assoc(wdev);
+ need_connect_result = false;
+ /*
+ * do not call connect_result() now because the
+ * sme will schedule work that does it later.
+ */
+ goto out;
}
if (!wdev->conn && wdev->sme_state == CFG80211_SME_IDLE) {
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 93c3ed3..ece378d 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -26,6 +26,7 @@
CFG80211_CONN_AUTHENTICATING,
CFG80211_CONN_ASSOCIATE_NEXT,
CFG80211_CONN_ASSOCIATING,
+ CFG80211_CONN_DEAUTH_ASSOC_FAIL,
} state;
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
u8 *ie;
@@ -148,6 +149,12 @@
NULL, 0,
WLAN_REASON_DEAUTH_LEAVING);
return err;
+ case CFG80211_CONN_DEAUTH_ASSOC_FAIL:
+ __cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
+ NULL, 0,
+ WLAN_REASON_DEAUTH_LEAVING);
+ /* return an error so that we call __cfg80211_connect_result() */
+ return -EINVAL;
default:
return 0;
}
@@ -158,6 +165,7 @@
struct cfg80211_registered_device *rdev =
container_of(work, struct cfg80211_registered_device, conn_work);
struct wireless_dev *wdev;
+ u8 bssid[ETH_ALEN];
rtnl_lock();
cfg80211_lock_rdev(rdev);
@@ -173,10 +181,10 @@
wdev_unlock(wdev);
continue;
}
+ memcpy(bssid, wdev->conn->params.bssid, ETH_ALEN);
if (cfg80211_conn_do_work(wdev))
__cfg80211_connect_result(
- wdev->netdev,
- wdev->conn->params.bssid,
+ wdev->netdev, bssid,
NULL, 0, NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
false, NULL);
@@ -337,6 +345,15 @@
return true;
}
+void cfg80211_sme_failed_assoc(struct wireless_dev *wdev)
+{
+ struct wiphy *wiphy = wdev->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ wdev->conn->state = CFG80211_CONN_DEAUTH_ASSOC_FAIL;
+ schedule_work(&rdev->conn_work);
+}
+
void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 87bbb8b..bc4114f 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2,7 +2,7 @@
# (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit)
# (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit)
# (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite)
-# (c) 2008, Andy Whitcroft <apw@canonical.com>
+# (c) 2008,2009, Andy Whitcroft <apw@canonical.com>
# Licensed under the terms of the GNU GPL License version 2
use strict;
@@ -10,7 +10,7 @@
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.29';
+my $V = '0.30';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -130,7 +130,10 @@
my $emitted_corrupt = 0;
-our $Ident = qr{[A-Za-z_][A-Za-z\d_]*};
+our $Ident = qr{
+ [A-Za-z_][A-Za-z\d_]*
+ (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)*
+ }x;
our $Storage = qr{extern|static|asmlinkage};
our $Sparse = qr{
__user|
@@ -997,23 +1000,25 @@
sub possible {
my ($possible, $line) = @_;
-
- print "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
- if ($possible !~ /(?:
+ my $notPermitted = qr{(?:
^(?:
$Modifier|
$Storage|
$Type|
- DEFINE_\S+|
+ DEFINE_\S+
+ )$|
+ ^(?:
goto|
return|
case|
else|
asm|__asm__|
do
- )$|
+ )(?:\s|$)|
^(?:typedef|struct|enum)\b
- )/x) {
+ )}x;
+ warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
+ if ($possible !~ $notPermitted) {
# Check for modifiers.
$possible =~ s/\s*$Storage\s*//g;
$possible =~ s/\s*$Sparse\s*//g;
@@ -1022,8 +1027,10 @@
} elsif ($possible =~ /\s/) {
$possible =~ s/\s*$Type\s*//g;
for my $modifier (split(' ', $possible)) {
- warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
- push(@modifierList, $modifier);
+ if ($modifier !~ $notPermitted) {
+ warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
+ push(@modifierList, $modifier);
+ }
}
} else {
@@ -1138,6 +1145,7 @@
# suppression flags
my %suppress_ifbraces;
my %suppress_whiletrailers;
+ my %suppress_export;
# Pre-scan the patch sanitizing the lines.
# Pre-scan the patch looking for any __setup documentation.
@@ -1230,7 +1238,6 @@
$linenr++;
my $rawline = $rawlines[$linenr - 1];
- my $hunk_line = ($realcnt != 0);
#extract the line range in the file after the patch is applied
if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
@@ -1247,6 +1254,7 @@
%suppress_ifbraces = ();
%suppress_whiletrailers = ();
+ %suppress_export = ();
next;
# track the line number as we move through the hunk, note that
@@ -1270,6 +1278,8 @@
$realcnt--;
}
+ my $hunk_line = ($realcnt != 0);
+
#make up the handle for any error we report on this line
$prefix = "$filename:$realline: " if ($emacs && $file);
$prefix = "$filename:$linenr: " if ($emacs && !$file);
@@ -1420,13 +1430,22 @@
}
# Check for potential 'bare' types
- my ($stat, $cond, $line_nr_next, $remain_next, $off_next);
+ my ($stat, $cond, $line_nr_next, $remain_next, $off_next,
+ $realline_next);
if ($realcnt && $line =~ /.\s*\S/) {
($stat, $cond, $line_nr_next, $remain_next, $off_next) =
ctx_statement_block($linenr, $realcnt, 0);
$stat =~ s/\n./\n /g;
$cond =~ s/\n./\n /g;
+ # Find the real next line.
+ $realline_next = $line_nr_next;
+ if (defined $realline_next &&
+ (!defined $lines[$realline_next - 1] ||
+ substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) {
+ $realline_next++;
+ }
+
my $s = $stat;
$s =~ s/{.*$//s;
@@ -1661,8 +1680,8 @@
}
# check for initialisation to aggregates open brace on the next line
- if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ &&
- $line =~ /^.\s*{/) {
+ if ($line =~ /^.\s*{/ &&
+ $prevline =~ /(?:^|[^=])=\s*$/) {
ERROR("that open brace { should be on the previous line\n" . $hereprev);
}
@@ -1687,21 +1706,40 @@
$line =~ s@//.*@@;
$opline =~ s@//.*@@;
-#EXPORT_SYMBOL should immediately follow its function closing }.
- if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) ||
- ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider
+# the whole statement.
+#print "APW <$lines[$realline_next - 1]>\n";
+ if (defined $realline_next &&
+ exists $lines[$realline_next - 1] &&
+ !defined $suppress_export{$realline_next} &&
+ ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
+ $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
my $name = $1;
- if ($prevline !~ /(?:
- ^.}|
+ if ($stat !~ /(?:
+ \n.}\s*$|
^.DEFINE_$Ident\(\Q$name\E\)|
^.DECLARE_$Ident\(\Q$name\E\)|
^.LIST_HEAD\(\Q$name\E\)|
- ^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
- \b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[)
+ ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
+ \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\()
)/x) {
- WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
+#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n";
+ $suppress_export{$realline_next} = 2;
+ } else {
+ $suppress_export{$realline_next} = 1;
}
}
+ if (!defined $suppress_export{$linenr} &&
+ $prevline =~ /^.\s*$/ &&
+ ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
+ $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+#print "FOO B <$lines[$linenr - 1]>\n";
+ $suppress_export{$linenr} = 2;
+ }
+ if (defined $suppress_export{$linenr} &&
+ $suppress_export{$linenr} == 2) {
+ WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
+ }
# check for external initialisers.
if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index cdb44b6..102b766 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
use strict;
my $P = $0;
-my $V = '0.20';
+my $V = '0.21';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -37,6 +37,7 @@
my $web = 0;
my $subsystem = 0;
my $status = 0;
+my $keywords = 1;
my $from_filename = 0;
my $pattern_depth = 0;
my $version = 0;
@@ -84,6 +85,7 @@
'scm!' => \$scm,
'web!' => \$web,
'pattern-depth=i' => \$pattern_depth,
+ 'k|keywords!' => \$keywords,
'f|file' => \$from_filename,
'v|version' => \$version,
'h|help' => \$help,
@@ -132,6 +134,8 @@
## Read MAINTAINERS for type/value pairs
my @typevalue = ();
+my %keyword_hash;
+
open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n";
while (<MAINT>) {
my $line = $_;
@@ -149,6 +153,8 @@
if ((-d $value)) {
$value =~ s@([^/])$@$1/@;
}
+ } elsif ($type eq "K") {
+ $keyword_hash{@typevalue} = $value;
}
push(@typevalue, "$type:$value");
} elsif (!/^(\s)*$/) {
@@ -188,6 +194,7 @@
my @files = ();
my @range = ();
+my @keyword_tvi = ();
foreach my $file (@ARGV) {
##if $file is a directory and it lacks a trailing slash, add one
@@ -198,11 +205,24 @@
}
if ($from_filename) {
push(@files, $file);
+ if (-f $file && $keywords) {
+ open(FILE, "<$file") or die "$P: Can't open ${file}\n";
+ while (<FILE>) {
+ my $patch_line = $_;
+ foreach my $line (keys %keyword_hash) {
+ if ($patch_line =~ m/^.*$keyword_hash{$line}/x) {
+ push(@keyword_tvi, $line);
+ }
+ }
+ }
+ close(FILE);
+ }
} else {
my $file_cnt = @files;
my $lastfile;
open(PATCH, "<$file") or die "$P: Can't open ${file}\n";
while (<PATCH>) {
+ my $patch_line = $_;
if (m/^\+\+\+\s+(\S+)/) {
my $filename = $1;
$filename =~ s@^[^/]*/@@;
@@ -213,6 +233,12 @@
if ($email_git_blame) {
push(@range, "$lastfile:$1:$2");
}
+ } elsif ($keywords) {
+ foreach my $line (keys %keyword_hash) {
+ if ($patch_line =~ m/^[+-].*$keyword_hash{$line}/x) {
+ push(@keyword_tvi, $line);
+ }
+ }
}
}
close(PATCH);
@@ -286,6 +312,13 @@
}
}
+if ($keywords) {
+ @keyword_tvi = sort_and_uniq(@keyword_tvi);
+ foreach my $line (@keyword_tvi) {
+ add_categories($line);
+ }
+}
+
if ($email) {
foreach my $chief (@penguin_chief) {
if ($chief =~ m/^(.*):(.*)/) {
@@ -384,6 +417,7 @@
Other options:
--pattern-depth => Number of pattern directory traversals (default: 0 (all))
+ --keywords => scan patch for keywords (default: 1 (on))
--version => show version
--help => show this help information
@@ -486,7 +520,6 @@
}
sub find_starting_index {
-
my ($index) = @_;
while ($index > 0) {
diff --git a/sound/ppc/Kconfig b/sound/ppc/Kconfig
index bd2338a..0519c60 100644
--- a/sound/ppc/Kconfig
+++ b/sound/ppc/Kconfig
@@ -2,7 +2,7 @@
menuconfig SND_PPC
bool "PowerPC sound devices"
- depends on PPC64 || PPC32
+ depends on PPC
default y
help
Support for sound devices specific to PowerPC architectures.
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 702d8fe..e8a510d9 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -765,19 +765,40 @@
if (c->Y && c->start_time <= we->time && c->end_time >= we->time) {
if (p->pid == we->waker) {
from = c->Y;
- task_from = c->comm;
+ task_from = strdup(c->comm);
}
if (p->pid == we->wakee) {
to = c->Y;
- task_to = c->comm;
+ task_to = strdup(c->comm);
}
}
c = c->next;
}
+ c = p->all;
+ while (c) {
+ if (p->pid == we->waker && !from) {
+ from = c->Y;
+ task_from = strdup(c->comm);
+ }
+ if (p->pid == we->wakee && !to) {
+ to = c->Y;
+ task_to = strdup(c->comm);
+ }
+ c = c->next;
+ }
}
p = p->next;
}
+ if (!task_from) {
+ task_from = malloc(40);
+ sprintf(task_from, "[%i]", we->waker);
+ }
+ if (!task_to) {
+ task_to = malloc(40);
+ sprintf(task_to, "[%i]", we->wakee);
+ }
+
if (we->waker == -1)
svg_interrupt(we->time, to);
else if (from && to && abs(from - to) == 1)
@@ -785,6 +806,9 @@
else
svg_partial_wakeline(we->time, from, task_from, to, task_to);
we = we->next;
+
+ free(task_from);
+ free(task_to);
}
}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 37512e9..a1b1d10 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -686,6 +686,8 @@
switch (c) {
case 'd':
prompt_integer(&delay_secs, "Enter display delay");
+ if (delay_secs < 1)
+ delay_secs = 1;
break;
case 'e':
prompt_integer(&print_entries, "Enter display entries (lines)");
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index c561d15..54552a0 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -1,7 +1,7 @@
#!/bin/sh
GVF=PERF-VERSION-FILE
-DEF_VER=v0.0.1.PERF
+DEF_VER=v0.0.2.PERF
LF='
'
diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c
index 856655d..b3637db 100644
--- a/tools/perf/util/svghelper.c
+++ b/tools/perf/util/svghelper.c
@@ -103,7 +103,7 @@
fprintf(svgfile, " rect.process2 { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.sample { fill:rgb( 0, 0,255); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.blocked { fill:rgb(255, 0, 0); fill-opacity:0.5; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
- fprintf(svgfile, " rect.waiting { fill:rgb(214,214, 0); fill-opacity:0.3; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
+ fprintf(svgfile, " rect.waiting { fill:rgb(224,214, 0); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.WAITING { fill:rgb(255,214, 48); fill-opacity:0.6; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.cpu { fill:rgb(192,192,192); fill-opacity:0.2; stroke-width:0.5; stroke:rgb(128,128,128); } \n");
fprintf(svgfile, " rect.pstate { fill:rgb(128,128,128); fill-opacity:0.8; stroke-width:0; } \n");