diff --git a/CREDITS b/CREDITS
index 64511e2..1f171f1 100644
--- a/CREDITS
+++ b/CREDITS
@@ -120,7 +120,6 @@
 D: Fixed the shm swap deallocation at swapoff time (try_to_unuse message)
 D: VM hacker
 D: Various other kernel hacks
-S: Via Cicalini 26
 S: Imola 40026
 S: Italy
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d7d30d..8db5c33 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1752,7 +1752,8 @@
 M:	ralf@linux-mips.org
 W:	http://www.linux-mips.org/
 L:	linux-mips@linux-mips.org
-S:	Maintained
+T:	git www.linux-mips.org:/pub/scm/linux.git
+S:	Supported
 
 MISCELLANEOUS MCA-SUPPORT
 P:	James Bottomley
diff --git a/Makefile b/Makefile
index ac54c03..cb57905 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =-rc6
+EXTRAVERSION =
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 159ad7e..d31b1cb 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -629,6 +629,22 @@
 }
 #endif
 
+
+#define LCM_ALC_EN	0x8000
+
+void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+	locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	udelay(100);
+	locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+	locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	spin_unlock_irqrestore(&lchip->lock, flags);
+}
+
+
 /**
  *	locomo_probe - probe for a single LoCoMo chip.
  *	@phys_addr: physical address of device.
@@ -688,6 +704,11 @@
 	/* FrontLight */
 	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
 	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+
+	/* Same constants can be used for collie and poodle
+	   (depending on CONFIG options in original sharp code)? */
+	frontlight_set(lchip, 163, 0, 148);
+
 	/* Longtime timer */
 	locomo_writel(0, lchip->base + LOCOMO_LTINT);
 	/* SPI */
diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c
index 7195add..60cfa7f 100644
--- a/arch/arm/kernel/compat.c
+++ b/arch/arm/kernel/compat.c
@@ -27,6 +27,8 @@
 
 #include <asm/mach/arch.h>
 
+#include "compat.h"
+
 /*
  * Usage:
  *  - do not go blindly adding fields, add them at the end
diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h
new file mode 100644
index 0000000..27e61a6
--- /dev/null
+++ b/arch/arm/kernel/compat.h
@@ -0,0 +1,13 @@
+/*
+ *  linux/arch/arm/kernel/compat.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void convert_to_tag_list(struct tag *tags);
+
+extern void squash_mem_tags(struct tag *tag);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 4b4e4cf..489c069 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -27,6 +27,7 @@
 #include <linux/kallsyms.h>
 #include <linux/init.h>
 #include <linux/cpu.h>
+#include <linux/elfcore.h>
 
 #include <asm/leds.h>
 #include <asm/processor.h>
@@ -83,7 +84,7 @@
  * This is our default idle handler.  We need to disable
  * interrupts here to ensure we don't miss a wakeup call.
  */
-void default_idle(void)
+static void default_idle(void)
 {
 	if (hlt_counter)
 		cpu_relax();
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index bc9e2f8..a1d1b29 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -628,7 +628,7 @@
 	if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
 		return -EACCES;
 	iwmmxt_task_release(thread);  /* force a reload */
-	return copy_from_user(&thead->fpstate.iwmmxt, ufp, IWMMXT_SIZE)
+	return copy_from_user(&thread->fpstate.iwmmxt, ufp, IWMMXT_SIZE)
 		? -EFAULT : 0;
 }
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 68273b4..08974cb 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -37,6 +37,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "compat.h"
+
 #ifndef MEM_SIZE
 #define MEM_SIZE	(16*1024*1024)
 #endif
@@ -53,10 +55,7 @@
 __setup("fpe=", fpe_setup);
 #endif
 
-extern unsigned int mem_fclk_21285;
 extern void paging_init(struct meminfo *, struct machine_desc *desc);
-extern void convert_to_tag_list(struct tag *tags);
-extern void squash_mem_tags(struct tag *tag);
 extern void reboot_setup(char *str);
 extern int root_mountflags;
 extern void _stext, _text, _etext, __data_start, _edata, _end;
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 0a47d38..ca09ba5 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -334,11 +334,17 @@
 
 };
 
+static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
+
 struct platform_device s3c_device_spi0 = {
 	.name		  = "s3c2410-spi",
 	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s3c_spi0_resource),
 	.resource	  = s3c_spi0_resource,
+        .dev              = {
+                .dma_mask = &s3c_device_spi0_dmamask,
+                .coherent_dma_mask = 0xffffffffUL
+        }
 };
 
 EXPORT_SYMBOL(s3c_device_spi0);
@@ -359,11 +365,17 @@
 
 };
 
+static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
+
 struct platform_device s3c_device_spi1 = {
 	.name		  = "s3c2410-spi",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s3c_spi1_resource),
 	.resource	  = s3c_spi1_resource,
+        .dev              = {
+                .dma_mask = &s3c_device_spi1_dmamask,
+                .coherent_dma_mask = 0xffffffffUL
+        }
 };
 
 EXPORT_SYMBOL(s3c_device_spi1);
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index eba7f53..7007e17 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -1029,6 +1029,16 @@
 	int	apicid, ret;
 
 	lock_cpu_hotplug();
+
+	/*
+	 * On x86, CPU0 is never offlined.  Trying to bring up an
+	 * already-booted CPU will hang.  So check for that case.
+	 */
+	if (cpu_online(cpu)) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
 	apicid = x86_cpu_to_apicid[cpu];
 	if (apicid == BAD_APICID) {
 		ret = -ENODEV;
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index fe9da16..3d8dac6 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -108,7 +108,8 @@
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
 
-cflags-$(CONFIG_SB1XXX_CORELIS)	+= -mno-sched-prolog -fno-omit-frame-pointer
+cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
+				   -fno-omit-frame-pointer
 
 #
 # Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>)
diff --git a/arch/mips/arc/misc.c b/arch/mips/arc/misc.c
index 84867de..b2e10b9 100644
--- a/arch/mips/arc/misc.c
+++ b/arch/mips/arc/misc.c
@@ -9,7 +9,6 @@
  * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
  * Copyright (C) 1999 Silicon Graphics, Inc.
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 
@@ -20,17 +19,11 @@
 #include <asm/bootinfo.h>
 #include <asm/system.h>
 
-extern void *sgiwd93_host;
-extern void reset_wd33c93(void *instance);
-
 VOID
 ArcHalt(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(halt);
 never:	goto never;
 }
@@ -40,9 +33,6 @@
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(pdown);
 never:	goto never;
 }
@@ -53,9 +43,6 @@
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(restart);
 never:	goto never;
 }
@@ -65,9 +52,6 @@
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(reboot);
 never:	goto never;
 }
@@ -77,9 +61,6 @@
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(imode);
 never:	goto never;
 }
diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c
index 4ffcced..c93af22 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/au1000/common/reset.c
@@ -164,17 +164,20 @@
 
 void au1000_halt(void)
 {
-#if defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
 	/* power off system */
-	printk("\n** Powering off Pb1550\n");
+	printk("\n** Powering off...\n");
 	au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
 	au_sync();
 	while(1); /* should not get here */
-#endif
+#else
 	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 #ifdef CONFIG_MIPS_MIRAGE
 	au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
 #endif
+#ifdef CONFIG_MIPS_DB1200
+	au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+#endif
 #ifdef CONFIG_PM
 	au_sleep();
 
@@ -187,6 +190,7 @@
 	                "wait\n\t"
 			".set\tmips0");
 #endif
+#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
 }
 
 void au1000_power_off(void)
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 42c94c7..51273b7 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -424,6 +424,8 @@
 	unsigned long j;
 	unsigned int count;
 
+	write_seqlock(&xtime_lock);
+
 	count = mips_hpt_read();
 	mips_timer_ack();
 
@@ -441,7 +443,6 @@
 	 * CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be
 	 * called as close as possible to 500 ms before the new second starts.
 	 */
-	write_seqlock(&xtime_lock);
 	if (ntp_synced() &&
 	    xtime.tv_sec > last_rtc_update + 660 &&
 	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
@@ -453,7 +454,6 @@
 			last_rtc_update = xtime.tv_sec - 600;
 		}
 	}
-	write_sequnlock(&xtime_lock);
 
 	/*
 	 * If jiffies has overflown in this timer_interrupt, we must
@@ -496,6 +496,8 @@
 		}
 	}
 
+	write_sequnlock(&xtime_lock);
+
 	/*
 	 * In UP mode, we call local_timer_interrupt() to do profiling
 	 * and process accouting.
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 0668e9b..9572ed44 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -375,6 +375,7 @@
 struct flush_cache_page_args {
 	struct vm_area_struct *vma;
 	unsigned long addr;
+	unsigned long pfn;
 };
 
 static inline void local_r4k_flush_cache_page(void *args)
@@ -382,6 +383,7 @@
 	struct flush_cache_page_args *fcp_args = args;
 	struct vm_area_struct *vma = fcp_args->vma;
 	unsigned long addr = fcp_args->addr;
+	unsigned long paddr = fcp_args->pfn << PAGE_SHIFT;
 	int exec = vma->vm_flags & VM_EXEC;
 	struct mm_struct *mm = vma->vm_mm;
 	pgd_t *pgdp;
@@ -431,11 +433,12 @@
 	 * Do indexed flush, too much work to get the (possible) TLB refills
 	 * to work correctly.
 	 */
-	addr = INDEX_BASE + (addr & (dcache_size - 1));
 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
-		r4k_blast_dcache_page_indexed(addr);
-		if (exec && !cpu_icache_snoops_remote_store)
-			r4k_blast_scache_page_indexed(addr);
+		r4k_blast_dcache_page_indexed(cpu_has_pindexed_dcache ?
+					      paddr : addr);
+		if (exec && !cpu_icache_snoops_remote_store) {
+			r4k_blast_scache_page_indexed(paddr);
+		}
 	}
 	if (exec) {
 		if (cpu_has_vtag_icache) {
@@ -455,6 +458,7 @@
 
 	args.vma = vma;
 	args.addr = addr;
+	args.pfn = pfn;
 
 	on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
 }
@@ -956,6 +960,7 @@
 	switch (c->cputype) {
 	case CPU_20KC:
 	case CPU_25KF:
+		c->dcache.flags |= MIPS_CACHE_PINDEX;
 	case CPU_R10000:
 	case CPU_R12000:
 	case CPU_SB1:
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 7c572be..fe232e3 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -210,7 +210,6 @@
 	 * Do indexed flush, too much work to get the (possible) TLB refills
 	 * to work correctly.
 	 */
-	page = (KSEG0 + (page & (dcache_size - 1)));
 	if (cpu_has_dc_aliases || exec)
 		tx39_blast_dcache_page_indexed(page);
 	if (exec)
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index 511c89d..1588f6d 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -47,23 +47,51 @@
 #define IMR_IP3_VAL	K_INT_MAP_I1
 #define IMR_IP4_VAL	K_INT_MAP_I2
 
+#define SB1250_HPT_NUM		3
+#define SB1250_HPT_VALUE	M_SCD_TIMER_CNT /* max value */
+#define SB1250_HPT_SHIFT	((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH)
+
+
 extern int sb1250_steal_irq(int irq);
 
+static unsigned int sb1250_hpt_read(void);
+static void sb1250_hpt_init(unsigned int);
+
+static unsigned int hpt_offset;
+
+void __init sb1250_hpt_setup(void)
+{
+	int cpu = smp_processor_id();
+
+	if (!cpu) {
+		/* Setup hpt using timer #3 but do not enable irq for it */
+		__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG)));
+		__raw_writeq(SB1250_HPT_VALUE,
+			     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_INIT)));
+		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+			     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG)));
+
+		/*
+		 * we need to fill 32 bits, so just use the upper 23 bits and pretend
+		 * the timer is going 512Mhz instead of 1Mhz
+		 */
+		mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT;
+		mips_hpt_init = sb1250_hpt_init;
+		mips_hpt_read = sb1250_hpt_read;
+	}
+}
+
+
 void sb1250_time_init(void)
 {
 	int cpu = smp_processor_id();
 	int irq = K_INT_TIMER_0+cpu;
 
-	/* Only have 4 general purpose timers */
-	if (cpu > 3) {
+	/* Only have 4 general purpose timers, and we use last one as hpt */
+	if (cpu > 2) {
 		BUG();
 	}
 
-	if (!cpu) {
-		/* Use our own gettimeoffset() routine */
-		do_gettimeoffset = sb1250_gettimeoffset;
-	}
-
 	sb1250_mask_irq(cpu, irq);
 
 	/* Map the timer interrupt to ip[4] of this cpu */
@@ -75,10 +103,10 @@
 	/* Disable the timer and set up the count */
 	__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 #ifdef CONFIG_SIMULATION
-	__raw_writeq(50000 / HZ,
+	__raw_writeq((50000 / HZ) - 1,
 		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #else
-	__raw_writeq(1000000 / HZ,
+	__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1,
 		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #endif
 
@@ -103,7 +131,7 @@
 	int cpu = smp_processor_id();
 	int irq = K_INT_TIMER_0 + cpu;
 
-	/* Reset the timer */
+	/* ACK interrupt */
 	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
 		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
@@ -122,15 +150,26 @@
 }
 
 /*
- * We use our own do_gettimeoffset() instead of the generic one,
- * because the generic one does not work for SMP case.
- * In addition, since we use general timer 0 for system time,
- * we can get accurate intra-jiffy offset without calibration.
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again. There's no easy way to set to a specific value so store init value
+ * in hpt_offset and subtract each time.
+ *
+ * Note: Timer isn't full 32bits so shift it into the upper part making
+ *       it appear to run at a higher frequency.
  */
-unsigned long sb1250_gettimeoffset(void)
+static unsigned int sb1250_hpt_read(void)
 {
-	unsigned long count =
-		__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+	unsigned int count;
 
-	return 1000000/HZ - count;
- }
+	count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
+
+	count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT;
+
+	return count - hpt_offset;
+}
+
+static void sb1250_hpt_init(unsigned int count)
+{
+	hpt_offset = count;
+	return;
+}
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index b614ca0..b661d24 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -70,6 +70,12 @@
 	return "SiByte " SIBYTE_BOARD_NAME;
 }
 
+void __init swarm_time_init(void)
+{
+	/* Setup HPT */
+	sb1250_hpt_setup();
+}
+
 void __init swarm_timer_setup(struct irqaction *irq)
 {
         /*
@@ -109,6 +115,7 @@
 
 	panic_timeout = 5;  /* For debug.  */
 
+	board_time_init = swarm_time_init;
 	board_timer_setup = swarm_timer_setup;
 	board_be_handler = swarm_be_handler;
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a834f9e..dfba817 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -580,7 +580,7 @@
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "kernel crash dumps (EXPERIMENTAL)"
+	bool "Build a kdump crash kernel (EXPERIMENTAL)"
 	depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index e0192c2..70e65b1 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -45,7 +45,8 @@
 	bdnz	2b
 
 	/* Do a cache flush for our text, in case OF didn't */
-3:	lis	r9,_start@h
+3:	lis	r9,_start@ha
+	addi	r9,r9,_start@l
 	add	r9,r0,r9
 	lis	r8,_etext@ha
 	addi	r8,r8,_etext@l
@@ -53,7 +54,7 @@
 4:	dcbf	r0,r9
 	icbi	r0,r9
 	addi	r9,r9,0x20
-	cmplwi	0,r9,8
+	cmplw	cr0,r9,r8
 	blt	4b
 	sync
 	isync
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index 063b84f..3c2acab 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:26 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:48 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -33,7 +37,6 @@
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -48,8 +51,6 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -58,8 +59,10 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -68,8 +71,10 @@
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -111,7 +116,6 @@
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 CONFIG_PPC_CELL=y
-CONFIG_PPC_OF=y
 # CONFIG_U3_DART is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
@@ -120,11 +124,15 @@
 CONFIG_MMIO_NVRAM=y
 CONFIG_CELL_IIC=y
 # CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
 #
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=y
+
+#
 # Kernel options
 #
 # CONFIG_HZ_100 is not set
@@ -140,6 +148,7 @@
 CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -191,6 +200,7 @@
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -234,6 +244,25 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -251,37 +280,23 @@
 # CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -297,11 +312,8 @@
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -311,7 +323,6 @@
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -322,6 +333,11 @@
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -540,9 +556,11 @@
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 CONFIG_SKGE=m
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_SPIDER_NET=y
 # CONFIG_MV643XX_ETH is not set
 
 #
@@ -628,13 +646,16 @@
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -646,6 +667,7 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -756,6 +778,12 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
@@ -827,7 +855,7 @@
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -847,6 +875,7 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -886,6 +915,7 @@
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -951,6 +981,7 @@
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1021,18 +1052,20 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1040,6 +1073,11 @@
 # CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index c775027..1816a46 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:32 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:52 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -33,7 +37,6 @@
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -49,8 +52,6 @@
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
@@ -60,8 +61,10 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -70,8 +73,10 @@
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -113,7 +118,6 @@
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
 # CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -183,6 +187,7 @@
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -220,6 +225,28 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -237,39 +264,23 @@
 # CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -285,13 +296,9 @@
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -305,6 +312,11 @@
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -451,13 +463,7 @@
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -574,6 +580,7 @@
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -723,6 +730,12 @@
 # CONFIG_I2C is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
@@ -788,7 +801,7 @@
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -825,6 +838,7 @@
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -865,6 +879,7 @@
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -993,31 +1008,36 @@
 #
 # Instrumentation Support
 #
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 # CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 68194c0..80a0db4 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:36 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:54 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -32,7 +36,6 @@
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -47,8 +50,6 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
@@ -58,8 +59,10 @@
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -68,8 +71,10 @@
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -111,14 +116,12 @@
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
 CONFIG_U3_DART=y
 CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -138,6 +141,7 @@
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -189,6 +193,7 @@
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -226,6 +231,11 @@
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -461,6 +471,7 @@
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -553,6 +564,7 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -651,6 +663,12 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
@@ -738,12 +756,14 @@
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -757,6 +777,7 @@
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -797,6 +818,7 @@
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
@@ -873,7 +895,7 @@
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -891,6 +913,7 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -927,6 +950,7 @@
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -988,6 +1012,7 @@
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1053,18 +1078,20 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -1073,6 +1100,11 @@
 CONFIG_XMON_DEFAULT=y
 # CONFIG_IRQSTACKS is not set
 CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options
diff --git a/arch/powerpc/configs/mpc834x_sys_defconfig b/arch/powerpc/configs/mpc834x_sys_defconfig
index 3bff761..5078b04 100644
--- a/arch/powerpc/configs/mpc834x_sys_defconfig
+++ b/arch/powerpc/configs/mpc834x_sys_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-g461d4edf-dirty
-# Fri Jan 13 11:01:47 2006
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:56 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -43,7 +43,6 @@
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -189,6 +188,7 @@
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -226,6 +226,11 @@
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -511,6 +516,7 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -615,6 +621,12 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
@@ -632,6 +644,7 @@
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -716,7 +729,7 @@
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -826,6 +839,7 @@
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -899,13 +913,3 @@
 #
 # Hardware crypto devices
 #
-
-#
-# SEC2.x Options
-#
-CONFIG_MPC8349E_SEC2x=y
-
-#
-# SEC2.x Test Options
-#
-CONFIG_MPC8349E_SEC2xTEST=y
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 2ace57d..57a0279 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Sat Jan 14 16:26:08 2006
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:21:32 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -17,8 +17,8 @@
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_CRASH_DUMP is not set
 # CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -43,7 +43,6 @@
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -236,6 +235,7 @@
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -271,6 +271,25 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -288,37 +307,22 @@
 CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-CONFIG_IP_NF_MATCH_DCCP=m
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -331,9 +335,12 @@
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
-# CONFIG_IP_NF_MANGLE is not set
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -360,6 +367,11 @@
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -377,6 +389,7 @@
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -568,7 +581,6 @@
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
@@ -654,8 +666,7 @@
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -991,6 +1002,7 @@
 #
 CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -1098,6 +1110,12 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
@@ -1348,6 +1366,7 @@
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -1488,7 +1507,7 @@
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -1609,6 +1628,7 @@
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1692,6 +1712,7 @@
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 0362a70..395e498 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -407,7 +407,7 @@
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index c367520..ba92bab7 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -589,7 +589,6 @@
 #endif /* CONFIG_PPC_MULTIPLATFORM */
 	if (mode == PCI_PROBE_NORMAL)
 		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
-	pci_bus_add_devices(bus);
 }
 
 static int __init pcibios_init(void)
@@ -608,8 +607,10 @@
 	printk("PCI: Probing PCI hardware\n");
 
 	/* Scan all of the recorded PCI controllers.  */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 		scan_phb(hose);
+		pci_bus_add_devices(hose->bus);
+	}
 
 #ifndef CONFIG_PPC_ISERIES
 	if (pci_probe_only)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 8a731ea..63ecbec 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -110,15 +110,6 @@
 EXPORT_SYMBOL(_outsw_ns);
 EXPORT_SYMBOL(_insl_ns);
 EXPORT_SYMBOL(_outsl_ns);
-EXPORT_SYMBOL(ioremap);
-#ifdef CONFIG_44x
-EXPORT_SYMBOL(ioremap64);
-#endif
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
-#endif
 
 #if defined(CONFIG_PPC32) && (defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE))
 EXPORT_SYMBOL(ppc_ide_md);
@@ -161,7 +152,6 @@
 EXPORT_SYMBOL(flush_dcache_range);
 
 #ifdef CONFIG_SMP
-EXPORT_SYMBOL(smp_call_function);
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(smp_hw_index);
 #endif
diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c
index 635d3b9..34d073fb 100644
--- a/arch/powerpc/kernel/rtas-rtc.c
+++ b/arch/powerpc/kernel/rtas-rtc.c
@@ -52,7 +52,7 @@
 		error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
 		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
 			if (in_interrupt() && printk_ratelimit()) {
-				memset(&rtc_tm, 0, sizeof(struct rtc_time));
+				memset(rtc_tm, 0, sizeof(struct rtc_time));
 				printk(KERN_WARNING "error: reading clock"
 				       " would delay interrupt\n");
 				return;	/* delay not allowed */
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 5579f65..7442775 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -280,8 +280,7 @@
 	return 0;
 }
 
-static int __devinit setup_phb(struct device_node *dev,
-			       struct pci_controller *phb)
+int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb)
 {
 	if (is_python(dev))
 		python_countermeasures(dev);
@@ -359,27 +358,6 @@
 	return 0;
 }
 
-struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
-{
-	struct pci_controller *phb;
-	int primary;
-
-	primary = list_empty(&hose_list);
-	phb = pcibios_alloc_controller(dn);
-	if (!phb)
-		return NULL;
-	setup_phb(dn, phb);
-	pci_process_bridge_OF_ranges(phb, dn, primary);
-
-	pci_setup_phb_io_dynamic(phb, primary);
-
-	pci_devs_phb_init_dynamic(phb);
-	scan_phb(phb);
-
-	return phb;
-}
-EXPORT_SYMBOL(init_phb_dynamic);
-
 /* RPA-specific bits for removing PHBs */
 int pcibios_remove_root_bus(struct pci_controller *phb)
 {
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 2a7ddc5..86f7e3d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -283,9 +283,9 @@
 	 * the two values of tb_update_count match and are even then the
 	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
 	 * loops back and reads them again until this criteria is met.
+	 * We expect the caller to have done the first increment of
+	 * vdso_data->tb_update_count already.
 	 */
-	++(vdso_data->tb_update_count);
-	smp_wmb();
 	vdso_data->tb_orig_stamp = new_tb_stamp;
 	vdso_data->stamp_xsec = new_stamp_xsec;
 	vdso_data->tb_to_xs = new_tb_to_xs;
@@ -310,20 +310,15 @@
 	unsigned long offset;
 	u64 new_stamp_xsec;
 	u64 tlen, t2x;
+	u64 tb, xsec_old, xsec_new;
+	struct gettimeofday_vars *varp;
 
 	if (__USE_RTC())
 		return;
 	tlen = current_tick_length();
 	offset = cur_tb - do_gtod.varp->tb_orig_stamp;
-	if (tlen == last_tick_len && offset < 0x80000000u) {
-		/* check that we're still in sync; if not, resync */
-		struct timeval tv;
-		__do_gettimeofday(&tv, cur_tb);
-		if (tv.tv_sec <= xtime.tv_sec &&
-		    (tv.tv_sec < xtime.tv_sec ||
-		     tv.tv_usec * 1000 <= xtime.tv_nsec))
-			return;
-	}
+	if (tlen == last_tick_len && offset < 0x80000000u)
+		return;
 	if (tlen != last_tick_len) {
 		t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs);
 		last_tick_len = tlen;
@@ -332,6 +327,21 @@
 	new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
 	do_div(new_stamp_xsec, 1000000000);
 	new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
+
+	++vdso_data->tb_update_count;
+	smp_mb();
+
+	/*
+	 * Make sure time doesn't go backwards for userspace gettimeofday.
+	 */
+	tb = get_tb();
+	varp = do_gtod.varp;
+	xsec_old = mulhdu(tb - varp->tb_orig_stamp, varp->tb_to_xs)
+		+ varp->stamp_xsec;
+	xsec_new = mulhdu(tb - cur_tb, t2x) + new_stamp_xsec;
+	if (xsec_new < xsec_old)
+		new_stamp_xsec += xsec_old - xsec_new;
+
 	update_gtod(cur_tb, new_stamp_xsec, t2x);
 }
 
@@ -564,6 +574,10 @@
 	}
 #endif
 
+	/* Make userspace gettimeofday spin until we're done. */
+	++vdso_data->tb_update_count;
+	smp_mb();
+
 	/*
 	 * Subtract off the number of nanoseconds since the
 	 * beginning of the last tick.
@@ -724,10 +738,16 @@
 	 * It is computed as:
 	 * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9)
 	 * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT
-	 * so as to give the result as a 0.64 fixed-point fraction.
+	 * which turns out to be N = 51 - SHIFT_HZ.
+	 * This gives the result as a 0.64 fixed-point fraction.
+	 * That value is reduced by an offset amounting to 1 xsec per
+	 * 2^31 timebase ticks to avoid problems with time going backwards
+	 * by 1 xsec when we do timer_recalc_offset due to losing the
+	 * fractional xsec.  That offset is equal to ppc_tb_freq/2^51
+	 * since there are 2^20 xsec in a second.
 	 */
-	div128_by_32(1ULL << (64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT), 0,
-		     tb_ticks_per_jiffy, &res);
+	div128_by_32((1ULL << 51) - ppc_tb_freq, 0,
+		     tb_ticks_per_jiffy << SHIFT_HZ, &res);
 	div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res);
 	ticklen_to_xs = res.result_low;
 
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index f4e5ac1..d296eb6 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -37,6 +37,7 @@
 
 unsigned long ioremap_base;
 unsigned long ioremap_bot;
+EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
 int io_bat_index;
 
 #if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
@@ -153,6 +154,7 @@
 {
 	return __ioremap(addr, size, _PAGE_NO_CACHE);
 }
+EXPORT_SYMBOL(ioremap64);
 
 void __iomem *
 ioremap(phys_addr_t addr, unsigned long size)
@@ -162,6 +164,7 @@
 	return ioremap64(addr64, size);
 }
 #endif /* CONFIG_PHYS_64BIT */
+EXPORT_SYMBOL(ioremap);
 
 void __iomem *
 __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
@@ -247,6 +250,7 @@
 out:
 	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
 }
+EXPORT_SYMBOL(__ioremap);
 
 void iounmap(volatile void __iomem *addr)
 {
@@ -259,6 +263,7 @@
 	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
 		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
 }
+EXPORT_SYMBOL(iounmap);
 
 void __iomem *ioport_map(unsigned long port, unsigned int len)
 {
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 34714d3..bbe7948 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2491,9 +2491,7 @@
 			pmac_mb.model_id = PMAC_TYPE_COMET;
 		iounmap(mach_id_ptr);
 	}
-#endif /* CONFIG_POWER4 */
 
-#ifdef CONFIG_6xx
 	/* Set default value of powersave_nap on machines that support it.
 	 * It appears that uninorth rev 3 has a problem with it, we don't
 	 * enable it on those. In theory, the flush-on-lock property is
@@ -2522,10 +2520,11 @@
 	 * NAP mode
 	 */
 	powersave_lowspeed = 1;
-#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
+
+#else /* CONFIG_POWER4 */
 	powersave_nap = 1;
-#endif
+#endif  /* CONFIG_POWER4 */
+
 	/* Check for "mobile" machine */
 	if (model && (strncmp(model, "PowerBook", 9) == 0
 		   || strncmp(model, "iBook", 5) == 0))
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 1955462..29c2946 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -621,10 +621,6 @@
 	/* Probe motherboard chipset */
 	pmac_feature_init();
 
-	/* We can NAP */
-	powersave_nap = 1;
-	printk(KERN_INFO "Using native/NAP idle loop\n");
-
 	/* Initialize debug stuff */
 	udbg_scc_init(!!strstr(cmd_line, "sccdbg"));
 	udbg_adb_init(!!strstr(cmd_line, "btextdbg"));
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 4e5c8f8..a57032c 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -19,7 +19,7 @@
 	depends on RTAS_PROC && PPC_PSERIES
 
 config LPARCFG
-	tristate "LPAR Configuration Data"
+	bool "LPAR Configuration Data"
 	depends on PPC_PSERIES || PPC_ISERIES
 	help
 	Provide system capacity information via human readable
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index f3bad90..44abdeb 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -27,6 +27,7 @@
 
 #include <linux/pci.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
 
 static struct pci_bus *
 find_bus_among_children(struct pci_bus *bus,
@@ -179,3 +180,30 @@
 	}
 }
 EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
+
+struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
+{
+	struct pci_controller *phb;
+	int primary;
+
+	primary = list_empty(&hose_list);
+	phb = pcibios_alloc_controller(dn);
+	if (!phb)
+		return NULL;
+	setup_phb(dn, phb);
+	pci_process_bridge_OF_ranges(phb, dn, 0);
+
+	pci_setup_phb_io_dynamic(phb, primary);
+
+	pci_devs_phb_init_dynamic(phb);
+
+	if (dn->child)
+		eeh_add_device_tree_early(dn);
+
+	scan_phb(phb);
+	pcibios_fixup_new_pci_devices(phb->bus, 0);
+	pci_bus_add_devices(phb->bus);
+
+	return phb;
+}
+EXPORT_SYMBOL_GPL(init_phb_dynamic);
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index ab89278..697aaca 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -103,9 +103,15 @@
 		return -EINVAL;
 	}
 
+	if (((uint32_t)ti->len) & (chunk_size - 1)) {
+		ti->error = "dm-stripe: Target length not divisible by "
+		    "chunk size";
+		return -EINVAL;
+	}
+
 	width = ti->len;
 	if (sector_div(width, stripes)) {
-		ti->error = "dm-stripe: Target length not divisable by "
+		ti->error = "dm-stripe: Target length not divisible by "
 		    "number of stripes";
 		return -EINVAL;
 	}
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index e99dfbb..87d79df 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -15,20 +15,6 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx8800
 
-config VIDEO_CX88_DVB
-	tristate "DVB/ATSC Support for cx2388x based TV cards"
-	depends on VIDEO_CX88 && DVB_CORE
-	select VIDEO_BUF_DVB
-	---help---
-	  This adds support for DVB/ATSC cards based on the
-	  Connexant 2388x chip.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx88-dvb.
-
-	  You must also select one or more DVB/ATSC demodulators.
-	  If you are unsure which you need, choose all of them.
-
 config VIDEO_CX88_ALSA
 	tristate "ALSA DMA audio support"
 	depends on VIDEO_CX88 && SND && EXPERIMENTAL
@@ -44,6 +30,20 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx88-alsa.
 
+config VIDEO_CX88_DVB
+	tristate "DVB/ATSC Support for cx2388x based TV cards"
+	depends on VIDEO_CX88 && DVB_CORE
+	select VIDEO_BUF_DVB
+	---help---
+	  This adds support for DVB/ATSC cards based on the
+	  Connexant 2388x chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx88-dvb.
+
+	  You must also select one or more DVB/ATSC demodulators.
+	  If you are unsure which you need, choose all of them.
+
 config VIDEO_CX88_DVB_ALL_FRONTENDS
 	bool "Build all supported frontends for cx2388x based TV cards"
 	default y
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 94a14a2..5b26780 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -367,6 +367,9 @@
 	em28xx_capture_start(dev, 1);
 	em28xx_resolution_set(dev);
 
+	/* device needs to be initialized before isoc transfer */
+	video_mux(dev, 0);
+
 	/* start the transfer */
 	errCode = em28xx_init_isoc(dev);
 	if (errCode)
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 2c5b849..30ff8ea 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1021,7 +1021,7 @@
 			if (test_and_clear_bit(nd->if_port,
 					       &sge->stopped_tx_queues) &&
 			    netif_running(nd)) {
-				sge->stats.cmdQ_restarted[3]++;
+				sge->stats.cmdQ_restarted[2]++;
 				netif_wake_queue(nd);
 			}
 		}
@@ -1350,7 +1350,7 @@
 	 	if (unlikely(credits < count)) {
 			netif_stop_queue(dev);
 			set_bit(dev->if_port, &sge->stopped_tx_queues);
-			sge->stats.cmdQ_full[3]++;
+			sge->stats.cmdQ_full[2]++;
 			spin_unlock(&q->lock);
 			if (!netif_queue_stopped(dev))
 				CH_ERR("%s: Tx ring full while queue awake!\n",
@@ -1358,7 +1358,7 @@
 			return NETDEV_TX_BUSY;
 		}
 		if (unlikely(credits - count < q->stop_thres)) {
-			sge->stats.cmdQ_full[3]++;
+			sge->stats.cmdQ_full[2]++;
 			netif_stop_queue(dev);
 			set_bit(dev->if_port, &sge->stopped_tx_queues);
 		}
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index ed13f72..31ac001 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2154,6 +2154,9 @@
 
 	msleep(10);
 
+	pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+			RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+
 	if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
 	   skb->data, ETH_DATA_LEN))
 		err = -EAGAIN;
@@ -2161,8 +2164,8 @@
 err_loopback_none:
 	mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
 	nic->loopback = lb_none;
-	e100_hw_init(nic);
 	e100_clean_cbs(nic);
+	e100_hw_reset(nic);
 err_clean_rx:
 	e100_rx_clean_list(nic);
 	return err;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4400117..f39de16 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3600,7 +3600,7 @@
 		e1000_rx_checksum(adapter,
 				  (uint32_t)(status) |
 				  ((uint32_t)(rx_desc->errors) << 24),
-				  rx_desc->csum, skb);
+				  le16_to_cpu(rx_desc->csum), skb);
 
 		skb->protocol = eth_type_trans(skb, netdev);
 #ifdef CONFIG_E1000_NAPI
@@ -3773,11 +3773,11 @@
 
 copydone:
 		e1000_rx_checksum(adapter, staterr,
-				  rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+				  le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
 		skb->protocol = eth_type_trans(skb, netdev);
 
 		if (likely(rx_desc->wb.upper.header_status &
-			  E1000_RXDPS_HDRSTAT_HDRSP))
+			   cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
 			adapter->rx_hdr_split++;
 #ifdef CONFIG_E1000_NAPI
 		if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
@@ -3799,7 +3799,7 @@
 		netdev->last_rx = jiffies;
 
 next_desc:
-		rx_desc->wb.middle.status_error &= ~0xFF;
+		rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
 		buffer_info->skb = NULL;
 
 		/* return some buffers to hardware, one at a time is too slow */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index c0878f3..bd49b25 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9552,12 +9552,36 @@
 		}
 	}
 
-	/* Find msi capability. */
+	/* The EPB bridge inside 5714, 5715, and 5780 cannot support
+	 * DMA addresses > 40-bit. This bridge may have other additional
+	 * 57xx devices behind it in some 4-port NIC designs for example.
+	 * Any tg3 device found behind the bridge will also need the 40-bit
+	 * DMA workaround.
+	 */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
 		tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
+		tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
 		tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
 	}
+	else {
+		struct pci_dev *bridge = NULL;
+
+		do {
+			bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+						PCI_DEVICE_ID_SERVERWORKS_EPB,
+						bridge);
+			if (bridge && bridge->subordinate &&
+			    (bridge->subordinate->number <=
+			     tp->pdev->bus->number) &&
+			    (bridge->subordinate->subordinate >=
+			     tp->pdev->bus->number)) {
+				tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+				pci_dev_put(bridge);
+				break;
+			}
+		} while (bridge);
+	}
 
 	/* Initialize misc host control in PCI block. */
 	tp->misc_host_ctrl |= (misc_ctrl_reg &
@@ -10303,7 +10327,14 @@
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
 			u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f);
 
-			if (ccval == 0x6 || ccval == 0x7)
+			/* If the 5704 is behind the EPB bridge, we can
+			 * do the less restrictive ONE_DMA workaround for
+			 * better performance.
+			 */
+			if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
+			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
+				tp->dma_rwctrl |= 0x8000;
+			else if (ccval == 0x6 || ccval == 0x7)
 				tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
 
 			/* Set bit 23 to enable PCIX hw bug fix */
@@ -10759,19 +10790,20 @@
 		goto err_out_iounmap;
 	}
 
-	/* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit.
+	/* The EPB bridge inside 5714, 5715, and 5780 and any
+	 * device behind the EPB cannot support DMA addresses > 40-bit.
 	 * On 64-bit systems with IOMMU, use 40-bit dma_mask.
 	 * On 64-bit systems without IOMMU, use 64-bit dma_mask and
 	 * do DMA address check in tg3_start_xmit().
 	 */
-	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+	if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+		persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+	else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
 		persist_dma_mask = dma_mask = DMA_40BIT_MASK;
 #ifdef CONFIG_HIGHMEM
 		dma_mask = DMA_64BIT_MASK;
 #endif
-	} else if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
-		persist_dma_mask = dma_mask = DMA_32BIT_MASK;
-	else
+	} else
 		persist_dma_mask = dma_mask = DMA_64BIT_MASK;
 
 	/* Configure DMA attributes. */
@@ -10908,8 +10940,10 @@
 	       (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
 	       (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
 	       (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
-	printk(KERN_INFO "%s: dma_rwctrl[%08x]\n",
-	       dev->name, tp->dma_rwctrl);
+	printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+	       dev->name, tp->dma_rwctrl,
+	       (pdev->dma_mask == DMA_32BIT_MASK) ? 32 :
+	        (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64));
 
 	return 0;
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 7f4b7f6..7e3b613 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2163,6 +2163,7 @@
 #define TG3_FLAG_10_100_ONLY		0x01000000
 #define TG3_FLAG_PAUSE_AUTONEG		0x02000000
 #define TG3_FLAG_IN_RESET_TASK		0x04000000
+#define TG3_FLAG_40BIT_DMA_BUG		0x08000000
 #define TG3_FLAG_BROKEN_CHECKSUMS	0x10000000
 #define TG3_FLAG_GOT_SERDES_FLOWCTL	0x20000000
 #define TG3_FLAG_SPLIT_MODE		0x40000000
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index ae6d032..cd5eeb0 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -202,7 +202,6 @@
 		filp->private_data = NULL;
 	}
 
-	d_drop(filp->f_dentry);
 	return 0;
 }
 
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 7442bdd..b3dbd71 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -256,11 +256,10 @@
 	unsigned long npages = dir_pages(inode);
 	unsigned chunk_mask = ~(ext2_chunk_size(inode)-1);
 	unsigned char *types = NULL;
-	int need_revalidate = (filp->f_version != inode->i_version);
-	int ret;
+	int need_revalidate = filp->f_version != inode->i_version;
 
 	if (pos > inode->i_size - EXT2_DIR_REC_LEN(1))
-		goto success;
+		return 0;
 
 	if (EXT2_HAS_INCOMPAT_FEATURE(sb, EXT2_FEATURE_INCOMPAT_FILETYPE))
 		types = ext2_filetype_table;
@@ -275,12 +274,15 @@
 				   "bad page in #%lu",
 				   inode->i_ino);
 			filp->f_pos += PAGE_CACHE_SIZE - offset;
-			ret = -EIO;
-			goto done;
+			return -EIO;
 		}
 		kaddr = page_address(page);
-		if (need_revalidate) {
-			offset = ext2_validate_entry(kaddr, offset, chunk_mask);
+		if (unlikely(need_revalidate)) {
+			if (offset) {
+				offset = ext2_validate_entry(kaddr, offset, chunk_mask);
+				filp->f_pos = (n<<PAGE_CACHE_SHIFT) + offset;
+			}
+			filp->f_version = inode->i_version;
 			need_revalidate = 0;
 		}
 		de = (ext2_dirent *)(kaddr+offset);
@@ -289,9 +291,8 @@
 			if (de->rec_len == 0) {
 				ext2_error(sb, __FUNCTION__,
 					"zero-length directory entry");
-				ret = -EIO;
 				ext2_put_page(page);
-				goto done;
+				return -EIO;
 			}
 			if (de->inode) {
 				int over;
@@ -306,19 +307,14 @@
 						le32_to_cpu(de->inode), d_type);
 				if (over) {
 					ext2_put_page(page);
-					goto success;
+					return 0;
 				}
 			}
 			filp->f_pos += le16_to_cpu(de->rec_len);
 		}
 		ext2_put_page(page);
 	}
-
-success:
-	ret = 0;
-done:
-	filp->f_version = inode->i_version;
-	return ret;
+	return 0;
 }
 
 /*
diff --git a/fs/nfsctl.c b/fs/nfsctl.c
index 0d4cf94..1c72c7f 100644
--- a/fs/nfsctl.c
+++ b/fs/nfsctl.c
@@ -98,10 +98,8 @@
 	if (copy_from_user(&version, &arg->ca_version, sizeof(int)))
 		return -EFAULT;
 
-	if (version != NFSCTL_VERSION) {
-		printk(KERN_WARNING "nfsd: incompatible version in syscall.\n");
+	if (version != NFSCTL_VERSION)
 		return -EINVAL;
-	}
 
 	if (cmd < 0 || cmd >= sizeof(map)/sizeof(map[0]) || !map[cmd].name)
 		return -EINVAL;
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index eb2de8c..ec91d1f 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -415,6 +415,9 @@
 	return ret;
 }
 
+extern void disable_hlt(void);
+extern void enable_hlt(void);
+
 #endif /* __ASSEMBLY__ */
 
 #define arch_align_stack(x) (x)
diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
index 78c9cc2..3f2b6d9 100644
--- a/include/asm-mips/cpu-features.h
+++ b/include/asm-mips/cpu-features.h
@@ -96,6 +96,9 @@
 #ifndef cpu_has_ic_fills_f_dc
 #define cpu_has_ic_fills_f_dc	(cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
 #endif
+#ifndef cpu_has_pindexed_dcache
+#define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#endif
 
 /*
  * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
index d5cf519..140be1c 100644
--- a/include/asm-mips/cpu-info.h
+++ b/include/asm-mips/cpu-info.h
@@ -39,6 +39,7 @@
 #define MIPS_CACHE_ALIASES	0x00000004	/* Cache could have aliases */
 #define MIPS_CACHE_IC_F_DC	0x00000008	/* Ic can refill from D-cache */
 #define MIPS_IC_SNOOPS_REMOTE	0x00000010	/* Ic snoops remote stores */
+#define MIPS_CACHE_PINDEX	0x00000020	/* Physically indexed cache */
 
 struct cpuinfo_mips {
 	unsigned long		udelay_val;
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index 6111a0c..feb29a7 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -3,7 +3,9 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ *   written by Ralf Baechle <ralf@linux-mips.org>
  */
 #ifndef _ASM_HAZARDS_H
 #define _ASM_HAZARDS_H
@@ -74,8 +76,7 @@
 #define irq_disable_hazard
 	_ehb
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
-      defined(CONFIG_CPU_SB1)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -99,13 +100,13 @@
 #else /* __ASSEMBLY__ */
 
 __asm__(
-	"	.macro	_ssnop					\n\t"
-	"	sll	$0, $0, 1				\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro	_ehb					\n\t"
-	"	sll	$0, $0, 3				\n\t"
-	"	.endm						\n\t");
+	"	.macro	_ssnop					\n"
+	"	sll	$0, $0, 1				\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	_ehb					\n"
+	"	sll	$0, $0, 3				\n"
+	"	.endm						\n");
 
 #ifdef CONFIG_CPU_RM9000
 
@@ -117,17 +118,21 @@
 
 #define mtc0_tlbw_hazard()						\
 	__asm__ __volatile__(						\
-		".set\tmips32\n\t"					\
-		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
-		".set\tmips0")
+	"	.set	mips32					\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	.set	mips0					\n")
 
 #define tlbw_use_hazard()						\
 	__asm__ __volatile__(						\
-		".set\tmips32\n\t"					\
-		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
-		".set\tmips0")
-
-#define back_to_back_c0_hazard()	do { } while (0)
+	"	.set	mips32					\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	.set	mips0					\n")
 
 #else
 
@@ -136,15 +141,25 @@
  */
 #define mtc0_tlbw_hazard()						\
 	__asm__ __volatile__(						\
-		".set noreorder\n\t"					\
-		"nop; nop; nop; nop; nop; nop;\n\t"			\
-		".set reorder\n\t")
+	"	.set	noreorder				\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	.set	reorder					\n")
 
 #define tlbw_use_hazard()						\
 	__asm__ __volatile__(						\
-		".set noreorder\n\t"					\
-		"nop; nop; nop; nop; nop; nop;\n\t"			\
-		".set reorder\n\t")
+	"	.set	noreorder				\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	.set	reorder					\n")
 
 #endif
 
@@ -156,49 +171,26 @@
 
 #ifdef CONFIG_CPU_MIPSR2
 
-__asm__(
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tback_to_back_c0_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm");
+__asm__("	.macro	irq_enable_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	irq_disable_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n");
 
-#define irq_enable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_enable_hazard")
-
-#define irq_disable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_disable_hazard")
-
-#define back_to_back_c0_hazard()					\
-	__asm__ __volatile__(						\
-	"back_to_back_c0_hazard")
-
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
-      defined(CONFIG_CPU_SB1)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
  */
 
 __asm__(
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	.endm");
-
-#define irq_enable_hazard()	do { } while (0)
-#define irq_disable_hazard()	do { } while (0)
-
-#define back_to_back_c0_hazard()	do { } while (0)
+	"	.macro	irq_enable_hazard			\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	irq_disable_hazard			\n"
+	"	.endm						\n");
 
 #else
 
@@ -209,29 +201,63 @@
  */
 
 __asm__(
-	"	#						\n\t"
-	"	# There is a hazard but we do not care		\n\t"
-	"	#						\n\t"
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	_ssnop; _ssnop; _ssnop				\n\t"
-	"	.endm");
-
-#define irq_enable_hazard()	do { } while (0)
-#define irq_disable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_disable_hazard")
-
-#define back_to_back_c0_hazard()					\
-	__asm__ __volatile__(						\
-	"	.set noreorder				\n"		\
-	"	nop; nop; nop				\n"		\
-	"	.set reorder				\n")
+	"	#						\n"
+	"	# There is a hazard but we do not care		\n"
+	"	#						\n"
+	"	.macro\tirq_enable_hazard			\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro\tirq_disable_hazard			\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	.endm						\n");
 
 #endif
 
+#define irq_enable_hazard()						\
+	__asm__ __volatile__("irq_enable_hazard")
+#define irq_disable_hazard()						\
+	__asm__ __volatile__("irq_disable_hazard")
+
+
+/*
+ * Back-to-back hazards -
+ *
+ * What is needed to separate a move to cp0 from a subsequent read from the
+ * same cp0 register?
+ */
+#ifdef CONFIG_CPU_MIPSR2
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n");
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+      defined(CONFIG_CPU_SB1)
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	.endm						\n");
+
+#else
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	.set	noreorder				\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	.set	reorder					\n"
+	"	.endm");
+
+#endif
+
+#define back_to_back_c0_hazard()					\
+	__asm__ __volatile__("back_to_back_c0_hazard")
+
+
+/*
+ * Instruction execution hazard
+ */
 #ifdef CONFIG_CPU_MIPSR2
 /*
  * gcc has a tradition of misscompiling the previous construct using the
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 8c011aa..ba1d7bb 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -4,7 +4,7 @@
  * for more details.
  *
  * Copyright (C) 1994, 1995 Waldorf GmbH
- * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 1994 - 2000, 06 Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
  *	Author:	Maciej W. Rozycki <macro@mips.com>
@@ -103,8 +103,20 @@
  */
 extern const unsigned long mips_io_port_base;
 
-#define set_io_port_base(base)	\
-	do { * (unsigned long *) &mips_io_port_base = (base); } while (0)
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases.  So we don't
+ * play quite by the book.  We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue.  Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer.  Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+	* (unsigned long *) &mips_io_port_base = base;
+	barrier();
+}
 
 /*
  * Thanks to James van Artsdalen for a better timing-fix than
diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h
index 9632c27..0bcb79a 100644
--- a/include/asm-mips/r4kcache.h
+++ b/include/asm-mips/r4kcache.h
@@ -257,7 +257,8 @@
 									\
 static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
 {									\
-	unsigned long start = page;					\
+	unsigned long indexmask = current_cpu_data.desc.waysize - 1;	\
+	unsigned long start = INDEX_BASE + (page & indexmask);		\
 	unsigned long end = start + PAGE_SIZE;				\
 	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
 	unsigned long ws_end = current_cpu_data.desc.ways <<		\
diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h
index a474c29..b09e16c 100644
--- a/include/asm-mips/sibyte/sb1250.h
+++ b/include/asm-mips/sibyte/sb1250.h
@@ -45,8 +45,8 @@
 extern unsigned int periph_rev;
 extern unsigned int zbbus_mhz;
 
+extern void sb1250_hpt_setup(void);
 extern void sb1250_time_init(void);
-extern unsigned long sb1250_gettimeoffset(void);
 extern void sb1250_mask_irq(int cpu, int irq);
 extern void sb1250_unmask_irq(int cpu, int irq);
 extern void sb1250_smp_finish(void);
diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h
index a667bc1..f4178bd 100644
--- a/include/asm-mips/sibyte/sb1250_scd.h
+++ b/include/asm-mips/sibyte/sb1250_scd.h
@@ -359,14 +359,15 @@
  */
 
 #define V_SCD_TIMER_FREQ            1000000
+#define V_SCD_TIMER_WIDTH           23
 
 #define S_SCD_TIMER_INIT            0
-#define M_SCD_TIMER_INIT            _SB_MAKEMASK(20,S_SCD_TIMER_INIT)
+#define M_SCD_TIMER_INIT            _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT)
 #define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_INIT)
 #define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT)
 
 #define S_SCD_TIMER_CNT             0
-#define M_SCD_TIMER_CNT             _SB_MAKEMASK(20,S_SCD_TIMER_CNT)
+#define M_SCD_TIMER_CNT             _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT)
 #define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_CNT)
 #define G_SCD_TIMER_CNT(x)         _SB_GETVALUE(x,S_SCD_TIMER_CNT,M_SCD_TIMER_CNT)
 
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
index f80482c..cf79bc7 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/include/asm-powerpc/ppc-pci.h
@@ -38,6 +38,7 @@
 
 void pci_devs_phb_init(void);
 void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+int setup_phb(struct device_node *dev, struct pci_controller *phb);
 void __devinit scan_phb(struct pci_controller *hose);
 
 /* From rtas_pci.h */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1709b50..751eea5 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1365,6 +1365,7 @@
 #define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
 #define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
 #define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
+#define PCI_DEVICE_ID_SERVERWORKS_EPB	  0x0103
 #define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
 #define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
 #define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203
diff --git a/include/net/ax25.h b/include/net/ax25.h
index 2250a18..d052b22 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -110,8 +110,15 @@
 enum {
 	AX25_PROTO_STD_SIMPLEX,
 	AX25_PROTO_STD_DUPLEX,
+#ifdef CONFIG_AX25_DAMA_SLAVE
 	AX25_PROTO_DAMA_SLAVE,
-	AX25_PROTO_DAMA_MASTER
+#ifdef CONFIG_AX25_DAMA_MASTER
+	AX25_PROTO_DAMA_MASTER,
+#define AX25_PROTO_MAX AX25_PROTO_DAMA_MASTER
+#endif
+#endif
+	__AX25_PROTO_MAX,
+	AX25_PROTO_MAX = __AX25_PROTO_MAX -1
 };
 
 enum {
diff --git a/include/net/sock.h b/include/net/sock.h
index 3075803..f63d0d5 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -478,9 +478,9 @@
 	rc = __condition;					\
 	if (!rc) {						\
 		*(__timeo) = schedule_timeout(*(__timeo));	\
-		rc = __condition;				\
 	}							\
 	lock_sock(__sk);					\
+	rc = __condition;					\
 	rc;							\
 })
 
diff --git a/kernel/fork.c b/kernel/fork.c
index ccdfbb1..b373322 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1478,9 +1478,7 @@
 
 	if ((unshare_flags & CLONE_VM) &&
 	    (mm && atomic_read(&mm->mm_users) > 1)) {
-		*new_mmp = dup_mm(current);
-		if (!*new_mmp)
-			return -ENOMEM;
+		return -EINVAL;
 	}
 
 	return 0;
@@ -1569,7 +1567,7 @@
 
 		if (new_sigh) {
 			sigh = current->sighand;
-			current->sighand = new_sigh;
+			rcu_assign_pointer(current->sighand, new_sigh);
 			new_sigh = sigh;
 		}
 
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 216f574..fa895fc 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -353,6 +353,7 @@
 				hrtimer_forward(&timr->it.real.timer,
 						timr->it.real.interval);
 			ret = HRTIMER_RESTART;
+			++timr->it_requeue_pending;
 		}
 	}
 
diff --git a/kernel/timer.c b/kernel/timer.c
index bf7c419..2410c18 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1354,8 +1354,8 @@
 
 #ifdef CONFIG_TIME_INTERPOLATION
 
-struct time_interpolator *time_interpolator;
-static struct time_interpolator *time_interpolator_list;
+struct time_interpolator *time_interpolator __read_mostly;
+static struct time_interpolator *time_interpolator_list __read_mostly;
 static DEFINE_SPINLOCK(time_interpolator_lock);
 
 static inline u64 time_interpolator_get_cycles(unsigned int src)
diff --git a/mm/memory.c b/mm/memory.c
index 9abc600..85e80a5 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -623,11 +623,12 @@
 			(*zap_work)--;
 			continue;
 		}
+
+		(*zap_work) -= PAGE_SIZE;
+
 		if (pte_present(ptent)) {
 			struct page *page;
 
-			(*zap_work) -= PAGE_SIZE;
-
 			page = vm_normal_page(vma, addr, ptent);
 			if (unlikely(details) && page) {
 				/*
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 2a82060..b21869a 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -330,9 +330,19 @@
 	int err;
 	struct vm_area_struct *first, *vma, *prev;
 
-	/* Clear the LRU lists so pages can be isolated */
-	if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL))
+	if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL)) {
+		/* Must have swap device for migration */
+		if (nr_swap_pages <= 0)
+			return ERR_PTR(-ENODEV);
+
+		/*
+		 * Clear the LRU lists so pages can be isolated.
+		 * Note that pages may be moved off the LRU after we have
+		 * drained them. Those pages will fail to migrate like other
+		 * pages that may be busy.
+		 */
 		lru_add_drain_all();
+	}
 
 	first = find_vma(mm, start);
 	if (!first)
diff --git a/mm/swap.c b/mm/swap.c
index e9ec06d..b524ea9 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -393,7 +393,8 @@
 		struct page *page = pvec->pages[i];
 
 		if (PagePrivate(page) && !TestSetPageLocked(page)) {
-			try_to_release_page(page, 0);
+			if (PagePrivate(page))
+				try_to_release_page(page, 0);
 			unlock_page(page);
 		}
 	}
diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c
index f67711f..894a225 100644
--- a/net/ax25/sysctl_net_ax25.c
+++ b/net/ax25/sysctl_net_ax25.c
@@ -24,7 +24,7 @@
 static int min_idle[1],  		max_idle[] = {65535 * HZ};
 static int min_n2[] = {1},		max_n2[] = {31};
 static int min_paclen[] = {1},		max_paclen[] = {512};
-static int min_proto[1],		max_proto[] = {3};
+static int min_proto[1],		max_proto[] = { AX25_PROTO_MAX };
 static int min_ds_timeout[1],   	max_ds_timeout[] = {65535 * HZ};
 
 static struct ctl_table_header *ax25_table_header;
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index f70ff13..b8b2a56 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -508,12 +508,7 @@
 	
 	va_start(ap, fmt);
 	len = vsnprintf(tmp, SZ, fmt, ap);
-	if (buf->size - buf->pos < len + 1) {
-		buf->size += 128;
-		buf->p = realloc(buf->p, buf->size);
-	}
-	strncpy(buf->p + buf->pos, tmp, len + 1);
-	buf->pos += len;
+	buf_write(buf, tmp, len);
 	va_end(ap);
 }
 
@@ -521,7 +516,7 @@
 buf_write(struct buffer *buf, const char *s, int len)
 {
 	if (buf->size - buf->pos < len) {
-		buf->size += len;
+		buf->size += len + SZ;
 		buf->p = realloc(buf->p, buf->size);
 	}
 	strncpy(buf->p + buf->pos, s, len);