| /* |
| * Device Tree Include file for Marvell Armada 370 and Armada XP SoC |
| * |
| * Copyright (C) 2012 Marvell |
| * |
| * Lior Amsalem <alior@marvell.com> |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * Ben Dooks <ben.dooks@codethink.co.uk> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| * |
| * This file contains the definitions that are common to the Armada |
| * 370 and Armada XP SoC. |
| */ |
| |
| /include/ "skeleton64.dtsi" |
| |
| #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
| |
| / { |
| model = "Marvell Armada 370 and XP SoC"; |
| compatible = "marvell,armada-370-xp"; |
| |
| aliases { |
| eth0 = ð0; |
| eth1 = ð1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu@0 { |
| compatible = "marvell,sheeva-v7"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| controller = <&mbusc>; |
| interrupt-parent = <&mpic>; |
| pcie-mem-aperture = <0xf8000000 0x7e00000>; |
| pcie-io-aperture = <0xffe00000 0x100000>; |
| |
| devbus-bootcs { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| devbus-cs0 { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| devbus-cs1 { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| devbus-cs2 { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| devbus-cs3 { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| internal-regs { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; |
| |
| rtc@10300 { |
| compatible = "marvell,orion-rtc"; |
| reg = <0x10300 0x20>; |
| interrupts = <50>; |
| }; |
| |
| spi0: spi@10600 { |
| compatible = "marvell,armada-370-spi", "marvell,orion-spi"; |
| reg = <0x10600 0x28>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| interrupts = <30>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@10680 { |
| compatible = "marvell,armada-370-spi", "marvell,orion-spi"; |
| reg = <0x10680 0x28>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| interrupts = <92>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@11000 { |
| compatible = "marvell,mv64xxx-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <31>; |
| timeout-ms = <1000>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@11100 { |
| compatible = "marvell,mv64xxx-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <32>; |
| timeout-ms = <1000>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@12000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x12000 0x100>; |
| reg-shift = <2>; |
| interrupts = <41>; |
| reg-io-width = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@12100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x12100 0x100>; |
| reg-shift = <2>; |
| interrupts = <42>; |
| reg-io-width = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| pinctrl: pin-ctrl@18000 { |
| reg = <0x18000 0x38>; |
| }; |
| |
| coredivclk: corediv-clock@18740 { |
| compatible = "marvell,armada-370-corediv-clock"; |
| reg = <0x18740 0xc>; |
| #clock-cells = <1>; |
| clocks = <&mainpll>; |
| clock-output-names = "nand"; |
| }; |
| |
| mbusc: mbus-controller@20000 { |
| compatible = "marvell,mbus-controller"; |
| reg = <0x20000 0x100>, <0x20180 0x20>, |
| <0x20250 0x8>; |
| }; |
| |
| mpic: interrupt-controller@20000 { |
| compatible = "marvell,mpic"; |
| #interrupt-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| msi-controller; |
| }; |
| |
| coherency-fabric@20200 { |
| compatible = "marvell,coherency-fabric"; |
| reg = <0x20200 0xb0>, <0x21010 0x1c>; |
| }; |
| |
| timer@20300 { |
| reg = <0x20300 0x30>, <0x21040 0x30>; |
| interrupts = <37>, <38>, <39>, <40>, <5>, <6>; |
| }; |
| |
| watchdog@20300 { |
| reg = <0x20300 0x34>, <0x20704 0x4>; |
| }; |
| |
| pmsu@22000 { |
| compatible = "marvell,armada-370-pmsu"; |
| reg = <0x22000 0x1000>; |
| }; |
| |
| usb@50000 { |
| compatible = "marvell,orion-ehci"; |
| reg = <0x50000 0x500>; |
| interrupts = <45>; |
| status = "disabled"; |
| }; |
| |
| usb@51000 { |
| compatible = "marvell,orion-ehci"; |
| reg = <0x51000 0x500>; |
| interrupts = <46>; |
| status = "disabled"; |
| }; |
| |
| eth0: ethernet@70000 { |
| compatible = "marvell,armada-370-neta"; |
| reg = <0x70000 0x4000>; |
| interrupts = <8>; |
| clocks = <&gateclk 4>; |
| status = "disabled"; |
| }; |
| |
| mdio: mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "marvell,orion-mdio"; |
| reg = <0x72004 0x4>; |
| clocks = <&gateclk 4>; |
| }; |
| |
| eth1: ethernet@74000 { |
| compatible = "marvell,armada-370-neta"; |
| reg = <0x74000 0x4000>; |
| interrupts = <10>; |
| clocks = <&gateclk 3>; |
| status = "disabled"; |
| }; |
| |
| sata@a0000 { |
| compatible = "marvell,armada-370-sata"; |
| reg = <0xa0000 0x5000>; |
| interrupts = <55>; |
| clocks = <&gateclk 15>, <&gateclk 30>; |
| clock-names = "0", "1"; |
| status = "disabled"; |
| }; |
| |
| nand@d0000 { |
| compatible = "marvell,armada370-nand"; |
| reg = <0xd0000 0x54>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupts = <113>; |
| clocks = <&coredivclk 0>; |
| status = "disabled"; |
| }; |
| |
| mvsdio@d4000 { |
| compatible = "marvell,orion-sdio"; |
| reg = <0xd4000 0x200>; |
| interrupts = <54>; |
| clocks = <&gateclk 17>; |
| bus-width = <4>; |
| cap-sdio-irq; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| clocks { |
| /* 2 GHz fixed main PLL */ |
| mainpll: mainpll { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <2000000000>; |
| }; |
| }; |
| }; |