| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "imx51-pinfunc.h" |
| #include <dt-bindings/clock/imx5-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| aliases { |
| ethernet0 = &fec; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| mmc0 = &esdhc1; |
| mmc1 = &esdhc2; |
| mmc2 = &esdhc3; |
| mmc3 = &esdhc4; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| spi0 = &ecspi1; |
| spi1 = &ecspi2; |
| spi2 = &cspi; |
| }; |
| |
| tzic: tz-interrupt-controller@e0000000 { |
| compatible = "fsl,imx51-tzic", "fsl,tzic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0xe0000000 0x4000>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ckil { |
| compatible = "fsl,imx-ckil", "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| |
| ckih1 { |
| compatible = "fsl,imx-ckih1", "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| ckih2 { |
| compatible = "fsl,imx-ckih2", "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| osc { |
| compatible = "fsl,imx-osc", "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a8"; |
| reg = <0>; |
| clock-latency = <62500>; |
| clocks = <&clks IMX5_CLK_CPU_PODF>; |
| clock-names = "cpu"; |
| operating-points = < |
| 166000 1000000 |
| 600000 1050000 |
| 800000 1100000 |
| >; |
| voltage-tolerance = <5>; |
| }; |
| }; |
| |
| usbphy { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "simple-bus"; |
| |
| usbphy0: usbphy@0 { |
| compatible = "usb-nop-xceiv"; |
| reg = <0>; |
| clocks = <&clks IMX5_CLK_USB_PHY_GATE>; |
| clock-names = "main_clk"; |
| }; |
| }; |
| |
| display-subsystem { |
| compatible = "fsl,imx-display-subsystem"; |
| ports = <&ipu_di0>, <&ipu_di1>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&tzic>; |
| ranges; |
| |
| iram: iram@1ffe0000 { |
| compatible = "mmio-sram"; |
| reg = <0x1ffe0000 0x20000>; |
| }; |
| |
| ipu: ipu@40000000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ipu"; |
| reg = <0x40000000 0x20000000>; |
| interrupts = <11 10>; |
| clocks = <&clks IMX5_CLK_IPU_GATE>, |
| <&clks IMX5_CLK_IPU_DI0_GATE>, |
| <&clks IMX5_CLK_IPU_DI1_GATE>; |
| clock-names = "bus", "di0", "di1"; |
| resets = <&src 2>; |
| |
| ipu_di0: port@2 { |
| reg = <2>; |
| |
| ipu_di0_disp0: endpoint { |
| }; |
| }; |
| |
| ipu_di1: port@3 { |
| reg = <3>; |
| |
| ipu_di1_disp1: endpoint { |
| }; |
| }; |
| }; |
| |
| aips@70000000 { /* AIPS1 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x70000000 0x10000000>; |
| ranges; |
| |
| spba@70000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x70000000 0x40000>; |
| ranges; |
| |
| esdhc1: esdhc@70004000 { |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70004000 0x4000>; |
| interrupts = <1>; |
| clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, |
| <&clks IMX5_CLK_DUMMY>, |
| <&clks IMX5_CLK_ESDHC1_PER_GATE>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| esdhc2: esdhc@70008000 { |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70008000 0x4000>; |
| interrupts = <2>; |
| clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, |
| <&clks IMX5_CLK_DUMMY>, |
| <&clks IMX5_CLK_ESDHC2_PER_GATE>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@7000c000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x7000c000 0x4000>; |
| interrupts = <33>; |
| clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, |
| <&clks IMX5_CLK_UART3_PER_GATE>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi1: ecspi@70010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ecspi"; |
| reg = <0x70010000 0x4000>; |
| interrupts = <36>; |
| clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, |
| <&clks IMX5_CLK_ECSPI1_PER_GATE>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@70014000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x70014000 0x4000>; |
| interrupts = <30>; |
| clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>, |
| <&clks IMX5_CLK_SSI2_ROOT_GATE>; |
| clock-names = "ipg", "baud"; |
| dmas = <&sdma 24 1 0>, |
| <&sdma 25 1 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| esdhc3: esdhc@70020000 { |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70020000 0x4000>; |
| interrupts = <3>; |
| clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, |
| <&clks IMX5_CLK_DUMMY>, |
| <&clks IMX5_CLK_ESDHC3_PER_GATE>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| esdhc4: esdhc@70024000 { |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70024000 0x4000>; |
| interrupts = <4>; |
| clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, |
| <&clks IMX5_CLK_DUMMY>, |
| <&clks IMX5_CLK_ESDHC4_PER_GATE>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usbotg: usb@73f80000 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80000 0x0200>; |
| interrupts = <18>; |
| clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| fsl,usbmisc = <&usbmisc 0>; |
| fsl,usbphy = <&usbphy0>; |
| status = "disabled"; |
| }; |
| |
| usbh1: usb@73f80200 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80200 0x0200>; |
| interrupts = <14>; |
| clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| fsl,usbmisc = <&usbmisc 1>; |
| status = "disabled"; |
| }; |
| |
| usbh2: usb@73f80400 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80400 0x0200>; |
| interrupts = <16>; |
| clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| fsl,usbmisc = <&usbmisc 2>; |
| status = "disabled"; |
| }; |
| |
| usbh3: usb@73f80600 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80600 0x0200>; |
| interrupts = <17>; |
| clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| fsl,usbmisc = <&usbmisc 3>; |
| status = "disabled"; |
| }; |
| |
| usbmisc: usbmisc@73f80800 { |
| #index-cells = <1>; |
| compatible = "fsl,imx51-usbmisc"; |
| reg = <0x73f80800 0x200>; |
| clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| }; |
| |
| gpio1: gpio@73f84000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f84000 0x4000>; |
| interrupts = <50 51>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@73f88000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f88000 0x4000>; |
| interrupts = <52 53>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@73f8c000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f8c000 0x4000>; |
| interrupts = <54 55>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@73f90000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f90000 0x4000>; |
| interrupts = <56 57>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| kpp: kpp@73f94000 { |
| compatible = "fsl,imx51-kpp", "fsl,imx21-kpp"; |
| reg = <0x73f94000 0x4000>; |
| interrupts = <60>; |
| clocks = <&clks IMX5_CLK_DUMMY>; |
| status = "disabled"; |
| }; |
| |
| wdog1: wdog@73f98000 { |
| compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; |
| reg = <0x73f98000 0x4000>; |
| interrupts = <58>; |
| clocks = <&clks IMX5_CLK_DUMMY>; |
| }; |
| |
| wdog2: wdog@73f9c000 { |
| compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; |
| reg = <0x73f9c000 0x4000>; |
| interrupts = <59>; |
| clocks = <&clks IMX5_CLK_DUMMY>; |
| status = "disabled"; |
| }; |
| |
| gpt: timer@73fa0000 { |
| compatible = "fsl,imx51-gpt", "fsl,imx31-gpt"; |
| reg = <0x73fa0000 0x4000>; |
| interrupts = <39>; |
| clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, |
| <&clks IMX5_CLK_GPT_HF_GATE>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| iomuxc: iomuxc@73fa8000 { |
| compatible = "fsl,imx51-iomuxc"; |
| reg = <0x73fa8000 0x4000>; |
| }; |
| |
| pwm1: pwm@73fb4000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; |
| reg = <0x73fb4000 0x4000>; |
| clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, |
| <&clks IMX5_CLK_PWM1_HF_GATE>; |
| clock-names = "ipg", "per"; |
| interrupts = <61>; |
| }; |
| |
| pwm2: pwm@73fb8000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; |
| reg = <0x73fb8000 0x4000>; |
| clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, |
| <&clks IMX5_CLK_PWM2_HF_GATE>; |
| clock-names = "ipg", "per"; |
| interrupts = <94>; |
| }; |
| |
| uart1: serial@73fbc000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fbc000 0x4000>; |
| interrupts = <31>; |
| clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, |
| <&clks IMX5_CLK_UART1_PER_GATE>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@73fc0000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fc0000 0x4000>; |
| interrupts = <32>; |
| clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, |
| <&clks IMX5_CLK_UART2_PER_GATE>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| src: src@73fd0000 { |
| compatible = "fsl,imx51-src"; |
| reg = <0x73fd0000 0x4000>; |
| #reset-cells = <1>; |
| }; |
| |
| clks: ccm@73fd4000{ |
| compatible = "fsl,imx51-ccm"; |
| reg = <0x73fd4000 0x4000>; |
| interrupts = <0 71 0x04 0 72 0x04>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| aips@80000000 { /* AIPS2 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x10000000>; |
| ranges; |
| |
| iim: iim@83f98000 { |
| compatible = "fsl,imx51-iim", "fsl,imx27-iim"; |
| reg = <0x83f98000 0x4000>; |
| interrupts = <69>; |
| clocks = <&clks IMX5_CLK_IIM_GATE>; |
| }; |
| |
| owire: owire@83fa4000 { |
| compatible = "fsl,imx51-owire", "fsl,imx21-owire"; |
| reg = <0x83fa4000 0x4000>; |
| interrupts = <88>; |
| clocks = <&clks IMX5_CLK_OWIRE_GATE>; |
| status = "disabled"; |
| }; |
| |
| ecspi2: ecspi@83fac000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ecspi"; |
| reg = <0x83fac000 0x4000>; |
| interrupts = <37>; |
| clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, |
| <&clks IMX5_CLK_ECSPI2_PER_GATE>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| sdma: sdma@83fb0000 { |
| compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; |
| reg = <0x83fb0000 0x4000>; |
| interrupts = <6>; |
| clocks = <&clks IMX5_CLK_SDMA_GATE>, |
| <&clks IMX5_CLK_SDMA_GATE>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; |
| }; |
| |
| cspi: cspi@83fc0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; |
| reg = <0x83fc0000 0x4000>; |
| interrupts = <38>; |
| clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, |
| <&clks IMX5_CLK_CSPI_IPG_GATE>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@83fc4000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; |
| reg = <0x83fc4000 0x4000>; |
| interrupts = <63>; |
| clocks = <&clks IMX5_CLK_I2C2_GATE>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@83fc8000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; |
| reg = <0x83fc8000 0x4000>; |
| interrupts = <62>; |
| clocks = <&clks IMX5_CLK_I2C1_GATE>; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@83fcc000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x83fcc000 0x4000>; |
| interrupts = <29>; |
| clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>, |
| <&clks IMX5_CLK_SSI1_ROOT_GATE>; |
| clock-names = "ipg", "baud"; |
| dmas = <&sdma 28 0 0>, |
| <&sdma 29 0 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| audmux: audmux@83fd0000 { |
| compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; |
| reg = <0x83fd0000 0x4000>; |
| clocks = <&clks IMX5_CLK_DUMMY>; |
| clock-names = "audmux"; |
| status = "disabled"; |
| }; |
| |
| weim: weim@83fda000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,imx51-weim"; |
| reg = <0x83fda000 0x1000>; |
| clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>; |
| ranges = < |
| 0 0 0xb0000000 0x08000000 |
| 1 0 0xb8000000 0x08000000 |
| 2 0 0xc0000000 0x08000000 |
| 3 0 0xc8000000 0x04000000 |
| 4 0 0xcc000000 0x02000000 |
| 5 0 0xce000000 0x02000000 |
| >; |
| status = "disabled"; |
| }; |
| |
| nfc: nand@83fdb000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,imx51-nand"; |
| reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; |
| interrupts = <8>; |
| clocks = <&clks IMX5_CLK_NFC_GATE>; |
| status = "disabled"; |
| }; |
| |
| pata: pata@83fe0000 { |
| compatible = "fsl,imx51-pata", "fsl,imx27-pata"; |
| reg = <0x83fe0000 0x4000>; |
| interrupts = <70>; |
| clocks = <&clks IMX5_CLK_PATA_GATE>; |
| status = "disabled"; |
| }; |
| |
| ssi3: ssi@83fe8000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x83fe8000 0x4000>; |
| interrupts = <96>; |
| clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>, |
| <&clks IMX5_CLK_SSI3_ROOT_GATE>; |
| clock-names = "ipg", "baud"; |
| dmas = <&sdma 46 0 0>, |
| <&sdma 47 0 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| fec: ethernet@83fec000 { |
| compatible = "fsl,imx51-fec", "fsl,imx27-fec"; |
| reg = <0x83fec000 0x4000>; |
| interrupts = <87>; |
| clocks = <&clks IMX5_CLK_FEC_GATE>, |
| <&clks IMX5_CLK_FEC_GATE>, |
| <&clks IMX5_CLK_FEC_GATE>; |
| clock-names = "ipg", "ahb", "ptp"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |