diff --git a/arch/arm64/boot/dts/qcom/sdm670-camera-sensor-svr.dtsi b/arch/arm64/boot/dts/qcom/sdm670-camera-sensor-svr.dtsi
index 8aaaebb..34b9d12 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-camera-sensor-svr.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-camera-sensor-svr.dtsi
@@ -311,9 +311,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig","cam_clk",
 				"cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <1800000 2850000 1200000 0 1800000>;
-		rgltr-max-voltage = <1800000 2850000 1200000 0 1800000>;
-		rgltr-load-current = <60000 80000 105000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 1800000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 1800000>;
+		rgltr-load-current = <60000 80000 120000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -367,8 +367,8 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <1800000 2850000 1800000 0>;
-		rgltr-max-voltage = <1800000 2850000 1800000 0>;
+		rgltr-min-voltage = <1800000 2800000 1800000 0>;
+		rgltr-max-voltage = <1800000 3000000 1800000 0>;
 		rgltr-load-current = <60000 80000 105000 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
@@ -417,8 +417,8 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 				"cam_clk";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <1800000 2850000 1200000 0>;
-		rgltr-max-voltage = <1800000 2850000 1200000 0>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0>;
 		rgltr-load-current = <60000 80000 105000 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
@@ -468,9 +468,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 				"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <1800000 2850000 1200000 0 1800000>;
-		rgltr-max-voltage = <1800000 2850000 1200000 0 1800000>;
-		rgltr-load-current = <60000 80000 105000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 1800000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 1800000>;
+		rgltr-load-current = <60000 80000 120000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
diff --git a/arch/arm64/boot/dts/qcom/sdm670-regulator.dtsi b/arch/arm64/boot/dts/qcom/sdm670-regulator.dtsi
index 3efadcb..c1dc175 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-regulator.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-regulator.dtsi
@@ -1,4 +1,4 @@
-/* Copyright (c) 2017,2018 The Linux Foundation. All rights reserved.
+/* Copyright (c) 2017,2020 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -538,9 +538,9 @@
 		pm660l_l3: regulator-pm660l-l3 {
 			regulator-name = "pm660l_l3";
 			qcom,set = <RPMH_REGULATOR_SET_ALL>;
-			regulator-min-microvolt = <2850000>;
+			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3008000>;
-			qcom,init-voltage = <2850000>;
+			qcom,init-voltage = <2800000>;
 			qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sdm670-stub-regulator.dtsi b/arch/arm64/boot/dts/qcom/sdm670-stub-regulator.dtsi
index bcdc415..07002e5 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-stub-regulator.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-stub-regulator.dtsi
@@ -1,4 +1,4 @@
-/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2020, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -255,7 +255,7 @@
 		compatible = "qcom,stub-regulator";
 		regulator-name = "pm660l_l3";
 		qcom,hpm-min-load = <10000>;
-		regulator-min-microvolt = <2850000>;
+		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <3008000>;
 	};