iwlegacy: s/IL_RATE/RATE/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
index 5c855e8..92fa436 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
@@ -42,19 +42,19 @@
#define RS_NAME "iwl-3945-rs"
-static s32 il3945_expected_tpt_g[IL_RATE_COUNT_3945] = {
+static s32 il3945_expected_tpt_g[RATE_COUNT_3945] = {
7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202
};
-static s32 il3945_expected_tpt_g_prot[IL_RATE_COUNT_3945] = {
+static s32 il3945_expected_tpt_g_prot[RATE_COUNT_3945] = {
7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125
};
-static s32 il3945_expected_tpt_a[IL_RATE_COUNT_3945] = {
+static s32 il3945_expected_tpt_a[RATE_COUNT_3945] = {
0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186
};
-static s32 il3945_expected_tpt_b[IL_RATE_COUNT_3945] = {
+static s32 il3945_expected_tpt_b[RATE_COUNT_3945] = {
7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0
};
@@ -64,39 +64,39 @@
};
static struct il3945_tpt_entry il3945_tpt_table_a[] = {
- {-60, IL_RATE_54M_INDEX},
- {-64, IL_RATE_48M_INDEX},
- {-72, IL_RATE_36M_INDEX},
- {-80, IL_RATE_24M_INDEX},
- {-84, IL_RATE_18M_INDEX},
- {-85, IL_RATE_12M_INDEX},
- {-87, IL_RATE_9M_INDEX},
- {-89, IL_RATE_6M_INDEX}
+ {-60, RATE_54M_INDEX},
+ {-64, RATE_48M_INDEX},
+ {-72, RATE_36M_INDEX},
+ {-80, RATE_24M_INDEX},
+ {-84, RATE_18M_INDEX},
+ {-85, RATE_12M_INDEX},
+ {-87, RATE_9M_INDEX},
+ {-89, RATE_6M_INDEX}
};
static struct il3945_tpt_entry il3945_tpt_table_g[] = {
- {-60, IL_RATE_54M_INDEX},
- {-64, IL_RATE_48M_INDEX},
- {-68, IL_RATE_36M_INDEX},
- {-80, IL_RATE_24M_INDEX},
- {-84, IL_RATE_18M_INDEX},
- {-85, IL_RATE_12M_INDEX},
- {-86, IL_RATE_11M_INDEX},
- {-88, IL_RATE_5M_INDEX},
- {-90, IL_RATE_2M_INDEX},
- {-92, IL_RATE_1M_INDEX}
+ {-60, RATE_54M_INDEX},
+ {-64, RATE_48M_INDEX},
+ {-68, RATE_36M_INDEX},
+ {-80, RATE_24M_INDEX},
+ {-84, RATE_18M_INDEX},
+ {-85, RATE_12M_INDEX},
+ {-86, RATE_11M_INDEX},
+ {-88, RATE_5M_INDEX},
+ {-90, RATE_2M_INDEX},
+ {-92, RATE_1M_INDEX}
};
-#define IL_RATE_MAX_WINDOW 62
-#define IL_RATE_FLUSH (3*HZ)
-#define IL_RATE_WIN_FLUSH (HZ/2)
+#define RATE_MAX_WINDOW 62
+#define RATE_FLUSH (3*HZ)
+#define RATE_WIN_FLUSH (HZ/2)
#define IL39_RATE_HIGH_TH 11520
#define IL_SUCCESS_UP_TH 8960
#define IL_SUCCESS_DOWN_TH 10880
-#define IL_RATE_MIN_FAILURE_TH 6
-#define IL_RATE_MIN_SUCCESS_TH 8
-#define IL_RATE_DECREASE_TH 1920
-#define IL_RATE_RETRY_TH 15
+#define RATE_MIN_FAILURE_TH 6
+#define RATE_MIN_SUCCESS_TH 8
+#define RATE_DECREASE_TH 1920
+#define RATE_RETRY_TH 15
static u8 il3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band)
{
@@ -157,16 +157,16 @@
/*
* For each rate, if we have collected data on that rate
- * and it has been more than IL_RATE_WIN_FLUSH
+ * and it has been more than RATE_WIN_FLUSH
* since we flushed, clear out the gathered stats
*/
- for (i = 0; i < IL_RATE_COUNT_3945; i++) {
+ for (i = 0; i < RATE_COUNT_3945; i++) {
if (!rs_sta->win[i].counter)
continue;
spin_lock_irqsave(&rs_sta->lock, flags);
if (time_after(jiffies, rs_sta->win[i].stamp +
- IL_RATE_WIN_FLUSH)) {
+ RATE_WIN_FLUSH)) {
D_RATE("flushing %d samples of rate "
"index %d\n",
rs_sta->win[i].counter, i);
@@ -179,8 +179,8 @@
return unflushed;
}
-#define IL_RATE_FLUSH_MAX 5000 /* msec */
-#define IL_RATE_FLUSH_MIN 50 /* msec */
+#define RATE_FLUSH_MAX 5000 /* msec */
+#define RATE_FLUSH_MIN 50 /* msec */
#define IL_AVERAGE_PACKETS 1500
static void il3945_bg_rate_scale_flush(unsigned long data)
@@ -217,12 +217,12 @@
if (pps) {
duration = (IL_AVERAGE_PACKETS * 1000) / pps;
- if (duration < IL_RATE_FLUSH_MIN)
- duration = IL_RATE_FLUSH_MIN;
- else if (duration > IL_RATE_FLUSH_MAX)
- duration = IL_RATE_FLUSH_MAX;
+ if (duration < RATE_FLUSH_MIN)
+ duration = RATE_FLUSH_MIN;
+ else if (duration > RATE_FLUSH_MAX)
+ duration = RATE_FLUSH_MAX;
} else
- duration = IL_RATE_FLUSH_MAX;
+ duration = RATE_FLUSH_MAX;
rs_sta->flush_time = msecs_to_jiffies(duration);
@@ -234,7 +234,7 @@
rs_sta->last_partial_flush = jiffies;
} else {
- rs_sta->flush_time = IL_RATE_FLUSH;
+ rs_sta->flush_time = RATE_FLUSH;
rs_sta->flush_pending = 0;
}
/* If there weren't any unflushed entries, we don't schedule the timer
@@ -278,13 +278,13 @@
* we keep these bitmaps!).
* */
while (retries > 0) {
- if (win->counter >= IL_RATE_MAX_WINDOW) {
+ if (win->counter >= RATE_MAX_WINDOW) {
/* remove earliest */
- win->counter = IL_RATE_MAX_WINDOW - 1;
+ win->counter = RATE_MAX_WINDOW - 1;
- if (win->data & (1ULL << (IL_RATE_MAX_WINDOW - 1))) {
- win->data &= ~(1ULL << (IL_RATE_MAX_WINDOW - 1));
+ if (win->data & (1ULL << (RATE_MAX_WINDOW - 1))) {
+ win->data &= ~(1ULL << (RATE_MAX_WINDOW - 1));
win->success_counter--;
}
}
@@ -315,8 +315,8 @@
fail_count = win->counter - win->success_counter;
/* Calculate average throughput, if we have enough history. */
- if (fail_count >= IL_RATE_MIN_FAILURE_TH ||
- win->success_counter >= IL_RATE_MIN_SUCCESS_TH)
+ if (fail_count >= RATE_MIN_FAILURE_TH ||
+ win->success_counter >= RATE_MIN_SUCCESS_TH)
win->average_tpt = ((win->success_ratio *
rs_sta->expected_tpt[index] + 64) / 128);
else
@@ -351,20 +351,20 @@
rs_sta->il = il;
- rs_sta->start_rate = IL_RATE_INVALID;
+ rs_sta->start_rate = RATE_INVALID;
/* default to just 802.11b */
rs_sta->expected_tpt = il3945_expected_tpt_b;
rs_sta->last_partial_flush = jiffies;
rs_sta->last_flush = jiffies;
- rs_sta->flush_time = IL_RATE_FLUSH;
+ rs_sta->flush_time = RATE_FLUSH;
rs_sta->last_tx_packets = 0;
rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
rs_sta->rate_scale_flush.function = il3945_bg_rate_scale_flush;
- for (i = 0; i < IL_RATE_COUNT_3945; i++)
+ for (i = 0; i < RATE_COUNT_3945; i++)
il3945_clear_win(&rs_sta->win[i]);
/* TODO: what is a good starting rate for STA? About middle? Maybe not
@@ -457,11 +457,11 @@
retries = info->status.rates[0].count;
/* Sanity Check for retries */
- if (retries > IL_RATE_RETRY_TH)
- retries = IL_RATE_RETRY_TH;
+ if (retries > RATE_RETRY_TH)
+ retries = RATE_RETRY_TH;
first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
- if (first_index < 0 || first_index >= IL_RATE_COUNT_3945) {
+ if (first_index < 0 || first_index >= RATE_COUNT_3945) {
D_RATE("leave: Rate out of bounds: %d\n", first_index);
return;
}
@@ -549,8 +549,8 @@
static u16 il3945_get_adjacent_rate(struct il3945_rs_sta *rs_sta,
u8 index, u16 rate_mask, enum ieee80211_band band)
{
- u8 high = IL_RATE_INVALID;
- u8 low = IL_RATE_INVALID;
+ u8 high = RATE_INVALID;
+ u8 low = RATE_INVALID;
struct il_priv *il __maybe_unused = rs_sta->il;
/* 802.11A walks to the next literal adjacent rate in
@@ -570,7 +570,7 @@
/* Find the next rate that is in the rate mask */
i = index + 1;
- for (mask = (1 << i); i < IL_RATE_COUNT_3945;
+ for (mask = (1 << i); i < RATE_COUNT_3945;
i++, mask <<= 1) {
if (rate_mask & mask) {
high = i;
@@ -582,12 +582,12 @@
}
low = index;
- while (low != IL_RATE_INVALID) {
+ while (low != RATE_INVALID) {
if (rs_sta->tgg)
low = il3945_rates[low].prev_rs_tgg;
else
low = il3945_rates[low].prev_rs;
- if (low == IL_RATE_INVALID)
+ if (low == RATE_INVALID)
break;
if (rate_mask & (1 << low))
break;
@@ -595,12 +595,12 @@
}
high = index;
- while (high != IL_RATE_INVALID) {
+ while (high != RATE_INVALID) {
if (rs_sta->tgg)
high = il3945_rates[high].next_rs_tgg;
else
high = il3945_rates[high].next_rs;
- if (high == IL_RATE_INVALID)
+ if (high == RATE_INVALID)
break;
if (rate_mask & (1 << high))
break;
@@ -631,8 +631,8 @@
{
struct ieee80211_supported_band *sband = txrc->sband;
struct sk_buff *skb = txrc->skb;
- u8 low = IL_RATE_INVALID;
- u8 high = IL_RATE_INVALID;
+ u8 low = RATE_INVALID;
+ u8 high = RATE_INVALID;
u16 high_low;
int index;
struct il3945_rs_sta *rs_sta = il_sta;
@@ -665,10 +665,10 @@
max_rate_idx = txrc->max_rate_idx;
if (sband->band == IEEE80211_BAND_5GHZ && max_rate_idx != -1)
max_rate_idx += IL_FIRST_OFDM_RATE;
- if (max_rate_idx < 0 || max_rate_idx >= IL_RATE_COUNT)
+ if (max_rate_idx < 0 || max_rate_idx >= RATE_COUNT)
max_rate_idx = -1;
- index = min(rs_sta->last_txrate_idx & 0xffff, IL_RATE_COUNT_3945 - 1);
+ index = min(rs_sta->last_txrate_idx & 0xffff, RATE_COUNT_3945 - 1);
if (sband->band == IEEE80211_BAND_5GHZ)
rate_mask = rate_mask << IL_FIRST_OFDM_RATE;
@@ -678,11 +678,11 @@
/* for recent assoc, choose best rate regarding
* to rssi value
*/
- if (rs_sta->start_rate != IL_RATE_INVALID) {
+ if (rs_sta->start_rate != RATE_INVALID) {
if (rs_sta->start_rate < index &&
(rate_mask & (1 << rs_sta->start_rate)))
index = rs_sta->start_rate;
- rs_sta->start_rate = IL_RATE_INVALID;
+ rs_sta->start_rate = RATE_INVALID;
}
/* force user max rate if set by user */
@@ -695,8 +695,8 @@
fail_count = win->counter - win->success_counter;
- if (fail_count < IL_RATE_MIN_FAILURE_TH &&
- win->success_counter < IL_RATE_MIN_SUCCESS_TH) {
+ if (fail_count < RATE_MIN_FAILURE_TH &&
+ win->success_counter < RATE_MIN_SUCCESS_TH) {
spin_unlock_irqrestore(&rs_sta->lock, flags);
D_RATE("Invalid average_tpt on rate %d: "
@@ -722,13 +722,13 @@
/* If user set max rate, dont allow higher than user constrain */
if (max_rate_idx != -1 && max_rate_idx < high)
- high = IL_RATE_INVALID;
+ high = RATE_INVALID;
/* Collect Measured throughputs of adjacent rates */
- if (low != IL_RATE_INVALID)
+ if (low != RATE_INVALID)
low_tpt = rs_sta->win[low].average_tpt;
- if (high != IL_RATE_INVALID)
+ if (high != RATE_INVALID)
high_tpt = rs_sta->win[high].average_tpt;
spin_unlock_irqrestore(&rs_sta->lock, flags);
@@ -736,7 +736,7 @@
scale_action = 0;
/* Low success ratio , need to drop the rate */
- if (win->success_ratio < IL_RATE_DECREASE_TH || !current_tpt) {
+ if (win->success_ratio < RATE_DECREASE_TH || !current_tpt) {
D_RATE("decrease rate because of low success_ratio\n");
scale_action = -1;
/* No throughput measured yet for adjacent rates,
@@ -744,9 +744,9 @@
} else if (low_tpt == IL_INVALID_VALUE &&
high_tpt == IL_INVALID_VALUE) {
- if (high != IL_RATE_INVALID && win->success_ratio >= IL_RATE_INCREASE_TH)
+ if (high != RATE_INVALID && win->success_ratio >= RATE_INCREASE_TH)
scale_action = 1;
- else if (low != IL_RATE_INVALID)
+ else if (low != RATE_INVALID)
scale_action = 0;
/* Both adjacent throughputs are measured, but neither one has
@@ -768,7 +768,7 @@
/* High rate has better throughput, Increase
* rate */
if (high_tpt > current_tpt &&
- win->success_ratio >= IL_RATE_INCREASE_TH)
+ win->success_ratio >= RATE_INCREASE_TH)
scale_action = 1;
else {
D_RATE(
@@ -780,7 +780,7 @@
D_RATE(
"decrease rate because of low tpt\n");
scale_action = -1;
- } else if (win->success_ratio >= IL_RATE_INCREASE_TH) {
+ } else if (win->success_ratio >= RATE_INCREASE_TH) {
/* Lower rate has better
* throughput,decrease rate */
scale_action = 1;
@@ -790,8 +790,8 @@
/* Sanity check; asked for decrease, but success rate or throughput
* has been good at old rate. Don't change it. */
- if (scale_action == -1 && low != IL_RATE_INVALID &&
- (win->success_ratio > IL_RATE_HIGH_TH ||
+ if (scale_action == -1 && low != RATE_INVALID &&
+ (win->success_ratio > RATE_HIGH_TH ||
current_tpt > 100 * rs_sta->expected_tpt[low]))
scale_action = 0;
@@ -799,13 +799,13 @@
case -1:
/* Decrese rate */
- if (low != IL_RATE_INVALID)
+ if (low != RATE_INVALID)
index = low;
break;
case 1:
/* Increase rate */
- if (high != IL_RATE_INVALID)
+ if (high != RATE_INVALID)
index = high;
break;
@@ -860,7 +860,7 @@
lq_sta->tx_packets,
lq_sta->last_txrate_idx,
lq_sta->start_rate, jiffies_to_msecs(lq_sta->flush_time));
- for (j = 0; j < IL_RATE_COUNT_3945; j++) {
+ for (j = 0; j < RATE_COUNT_3945; j++) {
desc += sprintf(buff+desc,
"counter=%d success=%d %%=%d\n",
lq_sta->win[j].counter,
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945.c b/drivers/net/wireless/iwlegacy/iwl-3945.c
index fa4c33a..728a90c 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945.c
+++ b/drivers/net/wireless/iwlegacy/iwl-3945.c
@@ -52,26 +52,26 @@
#include "iwl-3945-debugfs.h"
#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
- [IL_RATE_##r##M_INDEX] = { IL_RATE_##r##M_PLCP, \
- IL_RATE_##r##M_IEEE, \
- IL_RATE_##ip##M_INDEX, \
- IL_RATE_##in##M_INDEX, \
- IL_RATE_##rp##M_INDEX, \
- IL_RATE_##rn##M_INDEX, \
- IL_RATE_##pp##M_INDEX, \
- IL_RATE_##np##M_INDEX, \
- IL_RATE_##r##M_INDEX_TABLE, \
- IL_RATE_##ip##M_INDEX_TABLE }
+ [RATE_##r##M_INDEX] = { RATE_##r##M_PLCP, \
+ RATE_##r##M_IEEE, \
+ RATE_##ip##M_INDEX, \
+ RATE_##in##M_INDEX, \
+ RATE_##rp##M_INDEX, \
+ RATE_##rn##M_INDEX, \
+ RATE_##pp##M_INDEX, \
+ RATE_##np##M_INDEX, \
+ RATE_##r##M_INDEX_TABLE, \
+ RATE_##ip##M_INDEX_TABLE }
/*
* Parameter order:
* rate, prev rate, next rate, prev tgg rate, next tgg rate
*
* If there isn't a valid next or previous rate then INV is used which
- * maps to IL_RATE_INVALID
+ * maps to RATE_INVALID
*
*/
-const struct il3945_rate_info il3945_rates[IL_RATE_COUNT_3945] = {
+const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = {
IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
@@ -90,7 +90,7 @@
{
u8 rate = il3945_rates[rate_index].prev_ieee;
- if (rate == IL_RATE_INVALID)
+ if (rate == RATE_INVALID)
rate = rate_index;
return rate;
}
@@ -194,7 +194,7 @@
{
int idx;
- for (idx = 0; idx < IL_RATE_COUNT_3945; idx++)
+ for (idx = 0; idx < RATE_COUNT_3945; idx++)
if (il3945_rates[idx].plcp == plcp)
return idx;
return -1;
@@ -246,16 +246,16 @@
switch (il->band) {
case IEEE80211_BAND_5GHZ:
- if (rate == IL_RATE_12M_INDEX)
- next_rate = IL_RATE_9M_INDEX;
- else if (rate == IL_RATE_6M_INDEX)
- next_rate = IL_RATE_6M_INDEX;
+ if (rate == RATE_12M_INDEX)
+ next_rate = RATE_9M_INDEX;
+ else if (rate == RATE_6M_INDEX)
+ next_rate = RATE_6M_INDEX;
break;
case IEEE80211_BAND_2GHZ:
if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
il_is_associated(il)) {
- if (rate == IL_RATE_11M_INDEX)
- next_rate = IL_RATE_5M_INDEX;
+ if (rate == RATE_11M_INDEX)
+ next_rate = RATE_5M_INDEX;
}
break;
@@ -675,7 +675,7 @@
int sta_id, int tx_id)
{
u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value;
- u16 rate_index = min(hw_value & 0xffff, IL_RATE_COUNT_3945);
+ u16 rate_index = min(hw_value & 0xffff, RATE_COUNT_3945);
u16 rate_mask;
int rate;
u8 rts_retry_limit;
@@ -689,7 +689,7 @@
/* We need to figure out how to get the sta->supp_rates while
* in this running context */
- rate_mask = IL_RATES_MASK_3945;
+ rate_mask = RATES_MASK_3945;
/* Set retry limit on DATA packets and Probe Responses*/
if (ieee80211_is_probe_resp(fc))
@@ -1330,7 +1330,7 @@
/* use this channel group's 6Mbit clipping/saturation pwr,
* but cap at regulatory scan power restriction (set during init
* based on eeprom channel data) for this channel. */
- power = min(ch_info->scan_power, clip_pwrs[IL_RATE_6M_INDEX_TABLE]);
+ power = min(ch_info->scan_power, clip_pwrs[RATE_6M_INDEX_TABLE]);
power = min(power, il->tx_power_user_lmt);
scan_power_info->requested_power = power;
@@ -1342,7 +1342,7 @@
* *index*. */
power_index = ch_info->power_info[rate_index].power_table_index
- (power - ch_info->power_info
- [IL_RATE_6M_INDEX_TABLE].requested_power) * 2;
+ [RATE_6M_INDEX_TABLE].requested_power) * 2;
/* store reference index that we use when adjusting *all* scan
* powers. So we can accommodate user (all channel) or spectrum
@@ -1466,7 +1466,7 @@
power_info = ch_info->power_info;
/* update OFDM Txpower settings */
- for (i = IL_RATE_6M_INDEX_TABLE; i <= IL_RATE_54M_INDEX_TABLE;
+ for (i = RATE_6M_INDEX_TABLE; i <= RATE_54M_INDEX_TABLE;
i++, ++power_info) {
int delta_idx;
@@ -1490,14 +1490,14 @@
* ... all CCK power settings for a given channel are the *same*. */
if (power_changed) {
power =
- ch_info->power_info[IL_RATE_12M_INDEX_TABLE].
+ ch_info->power_info[RATE_12M_INDEX_TABLE].
requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
/* do all CCK rates' il3945_channel_power_info structures */
- for (i = IL_RATE_1M_INDEX_TABLE; i <= IL_RATE_11M_INDEX_TABLE; i++) {
+ for (i = RATE_1M_INDEX_TABLE; i <= RATE_11M_INDEX_TABLE; i++) {
power_info->requested_power = power;
power_info->base_power_index =
- ch_info->power_info[IL_RATE_12M_INDEX_TABLE].
+ ch_info->power_info[RATE_12M_INDEX_TABLE].
base_power_index + IL_CCK_FROM_OFDM_INDEX_DIFF;
++power_info;
}
@@ -1574,7 +1574,7 @@
ref_temp);
/* set tx power value for all rates, OFDM and CCK */
- for (rate_index = 0; rate_index < IL_RATE_COUNT_3945;
+ for (rate_index = 0; rate_index < RATE_COUNT_3945;
rate_index++) {
int power_idx =
ch_info->power_info[rate_index].base_power_index;
@@ -1597,7 +1597,7 @@
for (scan_tbl_index = 0;
scan_tbl_index < IL_NUM_SCAN_RATES; scan_tbl_index++) {
s32 actual_index = (scan_tbl_index == 0) ?
- IL_RATE_1M_INDEX_TABLE : IL_RATE_6M_INDEX_TABLE;
+ RATE_1M_INDEX_TABLE : RATE_6M_INDEX_TABLE;
il3945_hw_reg_set_scan_power(il, scan_tbl_index,
actual_index, clip_pwrs,
ch_info, a_band);
@@ -2010,21 +2010,21 @@
/* fill in channel group's nominal powers for each rate */
for (rate_index = 0;
- rate_index < IL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
+ rate_index < RATE_COUNT_3945; rate_index++, clip_pwrs++) {
switch (rate_index) {
- case IL_RATE_36M_INDEX_TABLE:
+ case RATE_36M_INDEX_TABLE:
if (i == 0) /* B/G */
*clip_pwrs = satur_pwr;
else /* A */
*clip_pwrs = satur_pwr - 5;
break;
- case IL_RATE_48M_INDEX_TABLE:
+ case RATE_48M_INDEX_TABLE:
if (i == 0)
*clip_pwrs = satur_pwr - 7;
else
*clip_pwrs = satur_pwr - 10;
break;
- case IL_RATE_54M_INDEX_TABLE:
+ case RATE_54M_INDEX_TABLE:
if (i == 0)
*clip_pwrs = satur_pwr - 9;
else
@@ -2139,7 +2139,7 @@
}
/* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
- pwr_info = &ch_info->power_info[IL_RATE_12M_INDEX_TABLE];
+ pwr_info = &ch_info->power_info[RATE_12M_INDEX_TABLE];
power = pwr_info->requested_power +
IL_CCK_FROM_OFDM_POWER_DIFF;
pwr_index = pwr_info->power_table_index +
@@ -2169,7 +2169,7 @@
for (scan_tbl_index = 0;
scan_tbl_index < IL_NUM_SCAN_RATES; scan_tbl_index++) {
s32 actual_index = (scan_tbl_index == 0) ?
- IL_RATE_1M_INDEX_TABLE : IL_RATE_6M_INDEX_TABLE;
+ RATE_1M_INDEX_TABLE : RATE_6M_INDEX_TABLE;
il3945_hw_reg_set_scan_power(il, scan_tbl_index,
actual_index, clip_pwrs, ch_info, a_band);
}
@@ -2289,7 +2289,7 @@
il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id,
(il->band == IEEE80211_BAND_5GHZ) ?
- IL_RATE_6M_PLCP : IL_RATE_1M_PLCP);
+ RATE_6M_PLCP : RATE_1M_PLCP);
il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id);
return 0;
@@ -2326,17 +2326,17 @@
D_RATE("Select A mode rate scale\n");
/* If one of the following CCK rates is used,
* have it fall back to the 6M OFDM rate */
- for (i = IL_RATE_1M_INDEX_TABLE;
- i <= IL_RATE_11M_INDEX_TABLE; i++)
+ for (i = RATE_1M_INDEX_TABLE;
+ i <= RATE_11M_INDEX_TABLE; i++)
table[i].next_rate_index =
il3945_rates[IL_FIRST_OFDM_RATE].table_rs_index;
/* Don't fall back to CCK rates */
- table[IL_RATE_12M_INDEX_TABLE].next_rate_index =
- IL_RATE_9M_INDEX_TABLE;
+ table[RATE_12M_INDEX_TABLE].next_rate_index =
+ RATE_9M_INDEX_TABLE;
/* Don't drop out of OFDM rates */
- table[IL_RATE_6M_INDEX_TABLE].next_rate_index =
+ table[RATE_6M_INDEX_TABLE].next_rate_index =
il3945_rates[IL_FIRST_OFDM_RATE].table_rs_index;
break;
@@ -2349,14 +2349,14 @@
il_is_associated(il)) {
index = IL_FIRST_CCK_RATE;
- for (i = IL_RATE_6M_INDEX_TABLE;
- i <= IL_RATE_54M_INDEX_TABLE; i++)
+ for (i = RATE_6M_INDEX_TABLE;
+ i <= RATE_54M_INDEX_TABLE; i++)
table[i].next_rate_index =
il3945_rates[index].table_rs_index;
- index = IL_RATE_11M_INDEX_TABLE;
+ index = RATE_11M_INDEX_TABLE;
/* CCK shouldn't fall back to OFDM... */
- table[index].next_rate_index = IL_RATE_5M_INDEX_TABLE;
+ table[index].next_rate_index = RATE_5M_INDEX_TABLE;
}
break;
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945.h b/drivers/net/wireless/iwlegacy/iwl-3945.h
index 967e733..80fcbf8 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945.h
+++ b/drivers/net/wireless/iwlegacy/iwl-3945.h
@@ -96,7 +96,7 @@
u8 flush_pending;
u8 start_rate;
struct timer_list rate_scale_flush;
- struct il3945_rate_scale_data win[IL_RATE_COUNT_3945];
+ struct il3945_rate_scale_data win[RATE_COUNT_3945];
#ifdef CONFIG_MAC80211_DEBUGFS
struct dentry *rs_sta_dbgfs_stats_table_file;
#endif
@@ -300,7 +300,7 @@
void il3945_post_scan(struct il_priv *il);
/* rates */
-extern const struct il3945_rate_info il3945_rates[IL_RATE_COUNT_3945];
+extern const struct il3945_rate_info il3945_rates[RATE_COUNT_3945];
/* Requires full declaration of il_priv before including */
#include "iwl-io.h"
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
index 57fc190..ee04977 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
@@ -423,7 +423,7 @@
} else {
if (band == IEEE80211_BAND_5GHZ)
band_offset = IL_FIRST_OFDM_RATE;
- for (idx = band_offset; idx < IL_RATE_COUNT_LEGACY; idx++)
+ for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++)
if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
return idx - band_offset;
}
@@ -870,14 +870,14 @@
RXON_FLG_CHANNEL_MODE_MSK)
>> RXON_FLG_CHANNEL_MODE_POS;
if (chan_mod == CHANNEL_MODE_PURE_40) {
- rate = IL_RATE_6M_PLCP;
+ rate = RATE_6M_PLCP;
} else {
- rate = IL_RATE_1M_PLCP;
+ rate = RATE_1M_PLCP;
rate_flags = RATE_MCS_CCK_MSK;
}
break;
case IEEE80211_BAND_5GHZ:
- rate = IL_RATE_6M_PLCP;
+ rate = RATE_6M_PLCP;
break;
default:
IL_WARN("Invalid scan band\n");
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
index 5d88a45..e31ee20 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
@@ -46,23 +46,23 @@
#define IL_NUMBER_TRY 1
#define IL_HT_NUMBER_TRY 3
-#define IL_RATE_MAX_WINDOW 62 /* # tx in history win */
-#define IL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
-#define IL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
+#define RATE_MAX_WINDOW 62 /* # tx in history win */
+#define RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
+#define RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
/* max allowed rate miss before sync LQ cmd */
#define IL_MISSED_RATE_MAX 15
/* max time to accum history 2 seconds */
-#define IL_RATE_SCALE_FLUSH_INTVL (3*HZ)
+#define RATE_SCALE_FLUSH_INTVL (3*HZ)
static u8 rs_ht_to_legacy[] = {
- IL_RATE_6M_INDEX, IL_RATE_6M_INDEX,
- IL_RATE_6M_INDEX, IL_RATE_6M_INDEX,
- IL_RATE_6M_INDEX,
- IL_RATE_6M_INDEX, IL_RATE_9M_INDEX,
- IL_RATE_12M_INDEX, IL_RATE_18M_INDEX,
- IL_RATE_24M_INDEX, IL_RATE_36M_INDEX,
- IL_RATE_48M_INDEX, IL_RATE_54M_INDEX
+ RATE_6M_INDEX, RATE_6M_INDEX,
+ RATE_6M_INDEX, RATE_6M_INDEX,
+ RATE_6M_INDEX,
+ RATE_6M_INDEX, RATE_9M_INDEX,
+ RATE_12M_INDEX, RATE_18M_INDEX,
+ RATE_24M_INDEX, RATE_36M_INDEX,
+ RATE_48M_INDEX, RATE_54M_INDEX
};
static const u8 ant_toggle_lookup[] = {
@@ -77,26 +77,26 @@
};
#define IL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
- [IL_RATE_##r##M_INDEX] = { IL_RATE_##r##M_PLCP, \
- IL_RATE_SISO_##s##M_PLCP, \
- IL_RATE_MIMO2_##s##M_PLCP,\
- IL_RATE_##r##M_IEEE, \
- IL_RATE_##ip##M_INDEX, \
- IL_RATE_##in##M_INDEX, \
- IL_RATE_##rp##M_INDEX, \
- IL_RATE_##rn##M_INDEX, \
- IL_RATE_##pp##M_INDEX, \
- IL_RATE_##np##M_INDEX }
+ [RATE_##r##M_INDEX] = { RATE_##r##M_PLCP, \
+ RATE_SISO_##s##M_PLCP, \
+ RATE_MIMO2_##s##M_PLCP,\
+ RATE_##r##M_IEEE, \
+ RATE_##ip##M_INDEX, \
+ RATE_##in##M_INDEX, \
+ RATE_##rp##M_INDEX, \
+ RATE_##rn##M_INDEX, \
+ RATE_##pp##M_INDEX, \
+ RATE_##np##M_INDEX }
/*
* Parameter order:
* rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
*
* If there isn't a valid next or previous rate then INV is used which
- * maps to IL_RATE_INVALID
+ * maps to RATE_INVALID
*
*/
-const struct il_rate_info il_rates[IL_RATE_COUNT] = {
+const struct il_rate_info il_rates[RATE_COUNT] = {
IL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
IL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
IL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
@@ -120,12 +120,12 @@
if (rate_n_flags & RATE_MCS_HT_MSK) {
idx = (rate_n_flags & 0xff);
- if (idx >= IL_RATE_MIMO2_6M_PLCP)
- idx = idx - IL_RATE_MIMO2_6M_PLCP;
+ if (idx >= RATE_MIMO2_6M_PLCP)
+ idx = idx - RATE_MIMO2_6M_PLCP;
idx += IL_FIRST_OFDM_RATE;
/* skip 9M not supported in ht*/
- if (idx >= IL_RATE_9M_INDEX)
+ if (idx >= RATE_9M_INDEX)
idx += 1;
if (idx >= IL_FIRST_OFDM_RATE && idx <= IL_LAST_OFDM_RATE)
return idx;
@@ -169,32 +169,32 @@
* (2.4 GHz) band.
*/
-static s32 expected_tpt_legacy[IL_RATE_COUNT] = {
+static s32 expected_tpt_legacy[RATE_COUNT] = {
7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
};
-static s32 expected_tpt_siso20MHz[4][IL_RATE_COUNT] = {
+static s32 expected_tpt_siso20MHz[4][RATE_COUNT] = {
{0, 0, 0, 0, 42, 0, 76, 102, 124, 158, 183, 193, 202}, /* Norm */
{0, 0, 0, 0, 46, 0, 82, 110, 132, 167, 192, 202, 210}, /* SGI */
{0, 0, 0, 0, 48, 0, 93, 135, 176, 251, 319, 351, 381}, /* AGG */
{0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */
};
-static s32 expected_tpt_siso40MHz[4][IL_RATE_COUNT] = {
+static s32 expected_tpt_siso40MHz[4][RATE_COUNT] = {
{0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
{0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
{0, 0, 0, 0, 96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */
{0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */
};
-static s32 expected_tpt_mimo2_20MHz[4][IL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_20MHz[4][RATE_COUNT] = {
{0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */
{0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */
{0, 0, 0, 0, 92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */
{0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI*/
};
-static s32 expected_tpt_mimo2_40MHz[4][IL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_40MHz[4][RATE_COUNT] = {
{0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
{0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
{0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */
@@ -202,7 +202,7 @@
};
/* mbps, mcs */
-static const struct il_rate_mcs_info il_rate_mcs[IL_RATE_COUNT] = {
+static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = {
{ "1", "BPSK DSSS"},
{ "2", "QPSK DSSS"},
{"5.5", "BPSK CCK"},
@@ -418,10 +418,10 @@
int scale_index, int attempts, int successes)
{
struct il_rate_scale_data *win = NULL;
- static const u64 mask = (((u64)1) << (IL_RATE_MAX_WINDOW - 1));
+ static const u64 mask = (((u64)1) << (RATE_MAX_WINDOW - 1));
s32 fail_count, tpt;
- if (scale_index < 0 || scale_index >= IL_RATE_COUNT)
+ if (scale_index < 0 || scale_index >= RATE_COUNT)
return -EINVAL;
/* Select win for current tx bit rate */
@@ -439,10 +439,10 @@
* we keep these bitmaps!).
*/
while (attempts > 0) {
- if (win->counter >= IL_RATE_MAX_WINDOW) {
+ if (win->counter >= RATE_MAX_WINDOW) {
/* remove earliest */
- win->counter = IL_RATE_MAX_WINDOW - 1;
+ win->counter = RATE_MAX_WINDOW - 1;
if (win->data & mask) {
win->data &= ~mask;
@@ -476,8 +476,8 @@
fail_count = win->counter - win->success_counter;
/* Calculate average throughput, if we have enough history. */
- if (fail_count >= IL_RATE_MIN_FAILURE_TH ||
- win->success_counter >= IL_RATE_MIN_SUCCESS_TH)
+ if (fail_count >= RATE_MIN_FAILURE_TH ||
+ win->success_counter >= RATE_MIN_SUCCESS_TH)
win->average_tpt = (win->success_ratio * tpt + 64) / 128;
else
win->average_tpt = IL_INVALID_VALUE;
@@ -557,7 +557,7 @@
memset(tbl, 0, sizeof(struct il_scale_tbl_info));
*rate_idx = il4965_hwrate_to_plcp_idx(rate_n_flags);
- if (*rate_idx == IL_RATE_INVALID) {
+ if (*rate_idx == RATE_INVALID) {
*rate_idx = -1;
return -EINVAL;
}
@@ -591,7 +591,7 @@
mcs = il4965_rs_extract_rate(rate_n_flags);
/* SISO */
- if (mcs <= IL_RATE_SISO_60M_PLCP) {
+ if (mcs <= RATE_SISO_60M_PLCP) {
if (il4965_num_of_ant == 1)
tbl->lq_type = LQ_SISO; /*else NONE*/
/* MIMO2 */
@@ -669,8 +669,8 @@
il4965_rs_get_adjacent_rate(struct il_priv *il, u8 index, u16 rate_mask,
int rate_type)
{
- u8 high = IL_RATE_INVALID;
- u8 low = IL_RATE_INVALID;
+ u8 high = RATE_INVALID;
+ u8 low = RATE_INVALID;
/* 802.11A or ht walks to the next literal adjacent rate in
* the rate table */
@@ -689,7 +689,7 @@
/* Find the next rate that is in the rate mask */
i = index + 1;
- for (mask = (1 << i); i < IL_RATE_COUNT; i++, mask <<= 1) {
+ for (mask = (1 << i); i < RATE_COUNT; i++, mask <<= 1) {
if (rate_mask & mask) {
high = i;
break;
@@ -700,9 +700,9 @@
}
low = index;
- while (low != IL_RATE_INVALID) {
+ while (low != RATE_INVALID) {
low = il_rates[low].prev_rs;
- if (low == IL_RATE_INVALID)
+ if (low == RATE_INVALID)
break;
if (rate_mask & (1 << low))
break;
@@ -710,9 +710,9 @@
}
high = index;
- while (high != IL_RATE_INVALID) {
+ while (high != RATE_INVALID) {
high = il_rates[high].next_rs;
- if (high == IL_RATE_INVALID)
+ if (high == RATE_INVALID)
break;
if (rate_mask & (1 << high))
break;
@@ -776,7 +776,7 @@
tbl->lq_type);
low = high_low & 0xff;
- if (low == IL_RATE_INVALID)
+ if (low == RATE_INVALID)
low = scale_index;
out:
@@ -856,7 +856,7 @@
/* For HT packets, map MCS to PLCP */
if (mac_flags & IEEE80211_TX_RC_MCS) {
mac_index &= RATE_MCS_CODE_MSK; /* Remove # of streams */
- if (mac_index >= (IL_RATE_9M_INDEX - IL_FIRST_OFDM_RATE))
+ if (mac_index >= (RATE_9M_INDEX - IL_FIRST_OFDM_RATE))
mac_index++;
/*
* mac80211 HT index is always zero-indexed; we need to move
@@ -1023,7 +1023,7 @@
struct il_scale_tbl_info *tbl)
{
/* Used to choose among HT tables */
- s32 (*ht_tbl_pointer)[IL_RATE_COUNT];
+ s32 (*ht_tbl_pointer)[RATE_COUNT];
/* Check for invalid LQ type */
if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
@@ -1089,7 +1089,7 @@
u16 high_low;
s8 rate = index;
- new_rate = high = low = start_hi = IL_RATE_INVALID;
+ new_rate = high = low = start_hi = RATE_INVALID;
for (; ;) {
high_low = il4965_rs_get_adjacent_rate(il, rate, rate_mask,
@@ -1114,16 +1114,16 @@
* "active" throughput (under perfect conditions).
*/
if ((100 * tpt_tbl[rate] > lq_sta->last_tpt &&
- (active_sr > IL_RATE_DECREASE_TH &&
- active_sr <= IL_RATE_HIGH_TH &&
+ (active_sr > RATE_DECREASE_TH &&
+ active_sr <= RATE_HIGH_TH &&
tpt_tbl[rate] <= active_tpt)) ||
- (active_sr >= IL_RATE_SCALE_SWITCH &&
+ (active_sr >= RATE_SCALE_SWITCH &&
tpt_tbl[rate] > active_tpt)) {
/* (2nd or later pass)
* If we've already tried to raise the rate, and are
* now trying to lower it, use the higher rate. */
- if (start_hi != IL_RATE_INVALID) {
+ if (start_hi != RATE_INVALID) {
new_rate = start_hi;
break;
}
@@ -1131,7 +1131,7 @@
new_rate = rate;
/* Loop again with lower rate */
- if (low != IL_RATE_INVALID)
+ if (low != RATE_INVALID)
rate = low;
/* Lower rate not available, use the original */
@@ -1143,11 +1143,11 @@
/* (2nd or later pass)
* If we've already tried to lower the rate, and are
* now trying to raise it, use the lower rate. */
- if (new_rate != IL_RATE_INVALID)
+ if (new_rate != RATE_INVALID)
break;
/* Loop again with higher rate */
- else if (high != IL_RATE_INVALID) {
+ else if (high != RATE_INVALID) {
start_hi = high;
rate = high;
@@ -1207,7 +1207,7 @@
D_RATE("LQ: MIMO2 best rate %d mask %X\n",
rate, rate_mask);
- if (rate == IL_RATE_INVALID || !((1 << rate) & rate_mask)) {
+ if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
D_RATE(
"Can't switch with index %d rate mask %x\n",
rate, rate_mask);
@@ -1259,7 +1259,7 @@
rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, index);
D_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
- if (rate == IL_RATE_INVALID || !((1 << rate) & rate_mask)) {
+ if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
D_RATE(
"can not switch with index %d rate mask %x\n",
rate, rate_mask);
@@ -1286,7 +1286,7 @@
&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
struct il_rate_scale_data *win = &(tbl->win[index]);
u32 sz = (sizeof(struct il_scale_tbl_info) -
- (sizeof(struct il_rate_scale_data) * IL_RATE_COUNT));
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
u8 start_action;
u8 valid_tx_ant = il->hw_params.valid_tx_ant;
u8 tx_chains_num = il->hw_params.tx_chains_num;
@@ -1404,7 +1404,7 @@
struct il_rate_scale_data *win = &(tbl->win[index]);
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct il_scale_tbl_info) -
- (sizeof(struct il_rate_scale_data) * IL_RATE_COUNT));
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
u8 start_action;
u8 valid_tx_ant = il->hw_params.valid_tx_ant;
u8 tx_chains_num = il->hw_params.tx_chains_num;
@@ -1526,7 +1526,7 @@
struct il_rate_scale_data *win = &(tbl->win[index]);
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct il_scale_tbl_info) -
- (sizeof(struct il_rate_scale_data) * IL_RATE_COUNT));
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
u8 start_action;
u8 valid_tx_ant = il->hw_params.valid_tx_ant;
u8 tx_chains_num = il->hw_params.tx_chains_num;
@@ -1663,7 +1663,7 @@
flush_interval_passed =
time_after(jiffies,
(unsigned long)(lq_sta->flush_timer +
- IL_RATE_SCALE_FLUSH_INTVL));
+ RATE_SCALE_FLUSH_INTVL));
/*
* Check if we should allow search for new modulation mode.
@@ -1703,7 +1703,7 @@
D_RATE(
"LQ: stay in table clear win\n");
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&(tbl->win[i]));
}
@@ -1713,7 +1713,7 @@
* bitmaps and stats in active table (this will become the new
* "search" table). */
if (!lq_sta->stay_in_tbl) {
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&(tbl->win[i]));
}
@@ -1752,8 +1752,8 @@
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- int low = IL_RATE_INVALID;
- int high = IL_RATE_INVALID;
+ int low = RATE_INVALID;
+ int high = RATE_INVALID;
int index;
int i;
struct il_rate_scale_data *win = NULL;
@@ -1884,8 +1884,8 @@
* in current association (use new rate found above).
*/
fail_count = win->counter - win->success_counter;
- if (fail_count < IL_RATE_MIN_FAILURE_TH &&
- win->success_counter < IL_RATE_MIN_SUCCESS_TH) {
+ if (fail_count < RATE_MIN_FAILURE_TH &&
+ win->success_counter < RATE_MIN_SUCCESS_TH) {
D_RATE("LQ: still below TH. succ=%d total=%d "
"for index %d\n",
win->success_counter, win->counter, index);
@@ -1971,21 +1971,21 @@
/* If user set max rate, dont allow higher than user constrain */
if (lq_sta->max_rate_idx != -1 &&
lq_sta->max_rate_idx < high)
- high = IL_RATE_INVALID;
+ high = RATE_INVALID;
sr = win->success_ratio;
/* Collect measured throughputs for current and adjacent rates */
current_tpt = win->average_tpt;
- if (low != IL_RATE_INVALID)
+ if (low != RATE_INVALID)
low_tpt = tbl->win[low].average_tpt;
- if (high != IL_RATE_INVALID)
+ if (high != RATE_INVALID)
high_tpt = tbl->win[high].average_tpt;
scale_action = 0;
/* Too many failures, decrease rate */
- if (sr <= IL_RATE_DECREASE_TH || current_tpt == 0) {
+ if (sr <= RATE_DECREASE_TH || current_tpt == 0) {
D_RATE(
"decrease rate because of low success_ratio\n");
scale_action = -1;
@@ -1994,9 +1994,9 @@
} else if (low_tpt == IL_INVALID_VALUE &&
high_tpt == IL_INVALID_VALUE) {
- if (high != IL_RATE_INVALID && sr >= IL_RATE_INCREASE_TH)
+ if (high != RATE_INVALID && sr >= RATE_INCREASE_TH)
scale_action = 1;
- else if (low != IL_RATE_INVALID)
+ else if (low != RATE_INVALID)
scale_action = 0;
}
@@ -2013,7 +2013,7 @@
if (high_tpt != IL_INVALID_VALUE) {
/* Higher rate has better throughput */
if (high_tpt > current_tpt &&
- sr >= IL_RATE_INCREASE_TH) {
+ sr >= RATE_INCREASE_TH) {
scale_action = 1;
} else {
scale_action = 0;
@@ -2026,7 +2026,7 @@
D_RATE(
"decrease rate because of low tpt\n");
scale_action = -1;
- } else if (sr >= IL_RATE_INCREASE_TH) {
+ } else if (sr >= RATE_INCREASE_TH) {
scale_action = 1;
}
}
@@ -2034,14 +2034,14 @@
/* Sanity check; asked for decrease, but success rate or throughput
* has been good at old rate. Don't change it. */
- if (scale_action == -1 && low != IL_RATE_INVALID &&
- (sr > IL_RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low]))
+ if (scale_action == -1 && low != RATE_INVALID &&
+ (sr > RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low]))
scale_action = 0;
switch (scale_action) {
case -1:
/* Decrease starting rate, update uCode's rate table */
- if (low != IL_RATE_INVALID) {
+ if (low != RATE_INVALID) {
update_lq = 1;
index = low;
}
@@ -2049,7 +2049,7 @@
break;
case 1:
/* Increase starting rate, update uCode's rate table */
- if (high != IL_RATE_INVALID) {
+ if (high != RATE_INVALID) {
update_lq = 1;
index = high;
}
@@ -2102,7 +2102,7 @@
if (lq_sta->search_better_tbl) {
/* Access the "search" table, clear its history. */
tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&(tbl->win[i]));
@@ -2208,7 +2208,7 @@
tbl = &(lq_sta->lq_info[active_tbl]);
- if (i < 0 || i >= IL_RATE_COUNT)
+ if (i < 0 || i >= RATE_COUNT)
i = 0;
rate = il_rates[i].plcp;
@@ -2251,7 +2251,7 @@
lq_sta->max_rate_idx != -1)
lq_sta->max_rate_idx += IL_FIRST_OFDM_RATE;
if (lq_sta->max_rate_idx < 0 ||
- lq_sta->max_rate_idx >= IL_RATE_COUNT)
+ lq_sta->max_rate_idx >= RATE_COUNT)
lq_sta->max_rate_idx = -1;
}
@@ -2275,7 +2275,7 @@
/* 6M and 9M shared same MCS index */
rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
if (il4965_rs_extract_rate(lq_sta->last_rate_n_flags) >=
- IL_RATE_MIMO2_6M_PLCP)
+ RATE_MIMO2_6M_PLCP)
rate_idx = rate_idx + MCS_INDEX_PER_STREAM;
info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
@@ -2292,7 +2292,7 @@
IEEE80211_TX_RC_GREEN_FIELD;
} else {
/* Check for invalid rates */
- if (rate_idx < 0 || rate_idx >= IL_RATE_COUNT_LEGACY ||
+ if (rate_idx < 0 || rate_idx >= RATE_COUNT_LEGACY ||
(sband->band == IEEE80211_BAND_5GHZ &&
rate_idx < IL_FIRST_OFDM_RATE))
rate_idx = rate_lowest_index(sband, sta);
@@ -2345,14 +2345,14 @@
lq_sta->lq.sta_id = sta_id;
for (j = 0; j < LQ_SIZE; j++)
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&lq_sta->lq_info[j].win[i]);
lq_sta->flush_timer = 0;
lq_sta->supp_rates = sta->supp_rates[sband->band];
for (j = 0; j < LQ_SIZE; j++)
- for (i = 0; i < IL_RATE_COUNT; i++)
+ for (i = 0; i < RATE_COUNT; i++)
il4965_rs_rate_scale_clear_win(
&lq_sta->lq_info[j].win[i]);
@@ -2745,7 +2745,7 @@
lq_sta->lq_info[i].is_dup,
lq_sta->is_green,
lq_sta->lq_info[i].current_rate);
- for (j = 0; j < IL_RATE_COUNT; j++) {
+ for (j = 0; j < RATE_COUNT; j++) {
desc += sprintf(buff+desc,
"counter=%d success=%d %%=%d\n",
lq_sta->lq_info[i].win[j].counter,
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-sta.c b/drivers/net/wireless/iwlegacy/iwl-4965-sta.c
index a82d444..278517c 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-sta.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-sta.c
@@ -50,9 +50,9 @@
/* Set up the rate scaling to start at selected rate, fall back
* all the way down to 1M in IEEE order, and then spin on 1M */
if (il->band == IEEE80211_BAND_5GHZ)
- r = IL_RATE_6M_INDEX;
+ r = RATE_6M_INDEX;
else
- r = IL_RATE_1M_INDEX;
+ r = RATE_1M_INDEX;
if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE)
rate_flags |= RATE_MCS_CCK_MSK;
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-tx.c b/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
index 68c86e0..9671e10 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
@@ -196,7 +196,7 @@
*/
rate_idx = info->control.rates[0].idx;
if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) ||
- rate_idx < 0 || rate_idx > IL_RATE_COUNT_LEGACY)
+ rate_idx < 0 || rate_idx > RATE_COUNT_LEGACY)
rate_idx = rate_lowest_index(&il->bands[info->band],
info->control.sta);
/* For 5 GHZ band, remap mac80211 rate indices into driver indices */
diff --git a/drivers/net/wireless/iwlegacy/iwl-commands.h b/drivers/net/wireless/iwlegacy/iwl-commands.h
index d1876d0..aed1101 100644
--- a/drivers/net/wireless/iwlegacy/iwl-commands.h
+++ b/drivers/net/wireless/iwlegacy/iwl-commands.h
@@ -2094,7 +2094,7 @@
* 4965 devices works its way through table when retrying Tx.
*/
struct {
- __le32 rate_n_flags; /* RATE_MCS_*, IL_RATE_* */
+ __le32 rate_n_flags; /* RATE_MCS_*, RATE_* */
} rs_table[LINK_QUAL_MAX_RETRY_NUM];
__le32 reserved2;
} __packed;
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index 6742a65..de952fb 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -174,7 +174,7 @@
if (!channels)
return -ENOMEM;
- rates = kzalloc((sizeof(struct ieee80211_rate) * IL_RATE_COUNT_LEGACY),
+ rates = kzalloc((sizeof(struct ieee80211_rate) * RATE_COUNT_LEGACY),
GFP_KERNEL);
if (!rates) {
kfree(channels);
@@ -186,7 +186,7 @@
sband->channels = &channels[ARRAY_SIZE(il_eeprom_band_1)];
/* just OFDM */
sband->bitrates = &rates[IL_FIRST_OFDM_RATE];
- sband->n_bitrates = IL_RATE_COUNT_LEGACY - IL_FIRST_OFDM_RATE;
+ sband->n_bitrates = RATE_COUNT_LEGACY - IL_FIRST_OFDM_RATE;
if (il->cfg->sku & IL_SKU_N)
il_init_ht_hw_capab(il, &sband->ht_cap,
@@ -196,7 +196,7 @@
sband->channels = channels;
/* OFDM & CCK */
sband->bitrates = rates;
- sband->n_bitrates = IL_RATE_COUNT_LEGACY;
+ sband->n_bitrates = RATE_COUNT_LEGACY;
if (il->cfg->sku & IL_SKU_N)
il_init_ht_hw_capab(il, &sband->ht_cap,
@@ -454,8 +454,8 @@
}
/* make sure basic rates 6Mbps and 1Mbps are supported */
- if ((rxon->ofdm_basic_rates & IL_RATE_6M_MASK) == 0 &&
- (rxon->cck_basic_rates & IL_RATE_1M_MASK) == 0) {
+ if ((rxon->ofdm_basic_rates & RATE_6M_MASK) == 0 &&
+ (rxon->cck_basic_rates & RATE_1M_MASK) == 0) {
IL_WARN("neither 1 nor 6 are basic\n");
error = true;
}
@@ -566,9 +566,9 @@
* the beacon skb from mac80211.
*/
if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK)
- return IL_RATE_1M_PLCP;
+ return RATE_1M_PLCP;
else
- return IL_RATE_6M_PLCP;
+ return RATE_6M_PLCP;
}
EXPORT_SYMBOL(il_get_lowest_plcp);
@@ -835,7 +835,7 @@
for (i = 0; i < hw->n_bitrates; i++) {
rate = &(hw->bitrates[i]);
- if (rate->hw_value < IL_RATE_COUNT_LEGACY)
+ if (rate->hw_value < RATE_COUNT_LEGACY)
il->active_rate |= (1 << rate->hw_value);
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h b/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
index 19fa92d0e..6670f2e 100644
--- a/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
+++ b/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
@@ -28,10 +28,10 @@
#define __il_rs_h__
struct il_rate_info {
- u8 plcp; /* uCode API: IL_RATE_6M_PLCP, etc. */
- u8 plcp_siso; /* uCode API: IL_RATE_SISO_6M_PLCP, etc. */
- u8 plcp_mimo2; /* uCode API: IL_RATE_MIMO2_6M_PLCP, etc. */
- u8 ieee; /* MAC header: IL_RATE_6M_IEEE, etc. */
+ u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
+ u8 plcp_siso; /* uCode API: RATE_SISO_6M_PLCP, etc. */
+ u8 plcp_mimo2; /* uCode API: RATE_MIMO2_6M_PLCP, etc. */
+ u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
u8 prev_ieee; /* previous rate in IEEE speeds */
u8 next_ieee; /* next rate in IEEE speeds */
u8 prev_rs; /* previous rate used in rs algo */
@@ -41,8 +41,8 @@
};
struct il3945_rate_info {
- u8 plcp; /* uCode API: IL_RATE_6M_PLCP, etc. */
- u8 ieee; /* MAC header: IL_RATE_6M_IEEE, etc. */
+ u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
+ u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
u8 prev_ieee; /* previous rate in IEEE speeds */
u8 next_ieee; /* next rate in IEEE speeds */
u8 prev_rs; /* previous rate used in rs algo */
@@ -56,153 +56,153 @@
/*
* These serve as indexes into
- * struct il_rate_info il_rates[IL_RATE_COUNT];
+ * struct il_rate_info il_rates[RATE_COUNT];
*/
enum {
- IL_RATE_1M_INDEX = 0,
- IL_RATE_2M_INDEX,
- IL_RATE_5M_INDEX,
- IL_RATE_11M_INDEX,
- IL_RATE_6M_INDEX,
- IL_RATE_9M_INDEX,
- IL_RATE_12M_INDEX,
- IL_RATE_18M_INDEX,
- IL_RATE_24M_INDEX,
- IL_RATE_36M_INDEX,
- IL_RATE_48M_INDEX,
- IL_RATE_54M_INDEX,
- IL_RATE_60M_INDEX,
- IL_RATE_COUNT,
- IL_RATE_COUNT_LEGACY = IL_RATE_COUNT - 1, /* Excluding 60M */
- IL_RATE_COUNT_3945 = IL_RATE_COUNT - 1,
- IL_RATE_INVM_INDEX = IL_RATE_COUNT,
- IL_RATE_INVALID = IL_RATE_COUNT,
+ RATE_1M_INDEX = 0,
+ RATE_2M_INDEX,
+ RATE_5M_INDEX,
+ RATE_11M_INDEX,
+ RATE_6M_INDEX,
+ RATE_9M_INDEX,
+ RATE_12M_INDEX,
+ RATE_18M_INDEX,
+ RATE_24M_INDEX,
+ RATE_36M_INDEX,
+ RATE_48M_INDEX,
+ RATE_54M_INDEX,
+ RATE_60M_INDEX,
+ RATE_COUNT,
+ RATE_COUNT_LEGACY = RATE_COUNT - 1, /* Excluding 60M */
+ RATE_COUNT_3945 = RATE_COUNT - 1,
+ RATE_INVM_INDEX = RATE_COUNT,
+ RATE_INVALID = RATE_COUNT,
};
enum {
- IL_RATE_6M_INDEX_TABLE = 0,
- IL_RATE_9M_INDEX_TABLE,
- IL_RATE_12M_INDEX_TABLE,
- IL_RATE_18M_INDEX_TABLE,
- IL_RATE_24M_INDEX_TABLE,
- IL_RATE_36M_INDEX_TABLE,
- IL_RATE_48M_INDEX_TABLE,
- IL_RATE_54M_INDEX_TABLE,
- IL_RATE_1M_INDEX_TABLE,
- IL_RATE_2M_INDEX_TABLE,
- IL_RATE_5M_INDEX_TABLE,
- IL_RATE_11M_INDEX_TABLE,
- IL_RATE_INVM_INDEX_TABLE = IL_RATE_INVM_INDEX - 1,
+ RATE_6M_INDEX_TABLE = 0,
+ RATE_9M_INDEX_TABLE,
+ RATE_12M_INDEX_TABLE,
+ RATE_18M_INDEX_TABLE,
+ RATE_24M_INDEX_TABLE,
+ RATE_36M_INDEX_TABLE,
+ RATE_48M_INDEX_TABLE,
+ RATE_54M_INDEX_TABLE,
+ RATE_1M_INDEX_TABLE,
+ RATE_2M_INDEX_TABLE,
+ RATE_5M_INDEX_TABLE,
+ RATE_11M_INDEX_TABLE,
+ RATE_INVM_INDEX_TABLE = RATE_INVM_INDEX - 1,
};
enum {
- IL_FIRST_OFDM_RATE = IL_RATE_6M_INDEX,
- IL39_LAST_OFDM_RATE = IL_RATE_54M_INDEX,
- IL_LAST_OFDM_RATE = IL_RATE_60M_INDEX,
- IL_FIRST_CCK_RATE = IL_RATE_1M_INDEX,
- IL_LAST_CCK_RATE = IL_RATE_11M_INDEX,
+ IL_FIRST_OFDM_RATE = RATE_6M_INDEX,
+ IL39_LAST_OFDM_RATE = RATE_54M_INDEX,
+ IL_LAST_OFDM_RATE = RATE_60M_INDEX,
+ IL_FIRST_CCK_RATE = RATE_1M_INDEX,
+ IL_LAST_CCK_RATE = RATE_11M_INDEX,
};
/* #define vs. enum to keep from defaulting to 'large integer' */
-#define IL_RATE_6M_MASK (1 << IL_RATE_6M_INDEX)
-#define IL_RATE_9M_MASK (1 << IL_RATE_9M_INDEX)
-#define IL_RATE_12M_MASK (1 << IL_RATE_12M_INDEX)
-#define IL_RATE_18M_MASK (1 << IL_RATE_18M_INDEX)
-#define IL_RATE_24M_MASK (1 << IL_RATE_24M_INDEX)
-#define IL_RATE_36M_MASK (1 << IL_RATE_36M_INDEX)
-#define IL_RATE_48M_MASK (1 << IL_RATE_48M_INDEX)
-#define IL_RATE_54M_MASK (1 << IL_RATE_54M_INDEX)
-#define IL_RATE_60M_MASK (1 << IL_RATE_60M_INDEX)
-#define IL_RATE_1M_MASK (1 << IL_RATE_1M_INDEX)
-#define IL_RATE_2M_MASK (1 << IL_RATE_2M_INDEX)
-#define IL_RATE_5M_MASK (1 << IL_RATE_5M_INDEX)
-#define IL_RATE_11M_MASK (1 << IL_RATE_11M_INDEX)
+#define RATE_6M_MASK (1 << RATE_6M_INDEX)
+#define RATE_9M_MASK (1 << RATE_9M_INDEX)
+#define RATE_12M_MASK (1 << RATE_12M_INDEX)
+#define RATE_18M_MASK (1 << RATE_18M_INDEX)
+#define RATE_24M_MASK (1 << RATE_24M_INDEX)
+#define RATE_36M_MASK (1 << RATE_36M_INDEX)
+#define RATE_48M_MASK (1 << RATE_48M_INDEX)
+#define RATE_54M_MASK (1 << RATE_54M_INDEX)
+#define RATE_60M_MASK (1 << RATE_60M_INDEX)
+#define RATE_1M_MASK (1 << RATE_1M_INDEX)
+#define RATE_2M_MASK (1 << RATE_2M_INDEX)
+#define RATE_5M_MASK (1 << RATE_5M_INDEX)
+#define RATE_11M_MASK (1 << RATE_11M_INDEX)
/* uCode API values for legacy bit rates, both OFDM and CCK */
enum {
- IL_RATE_6M_PLCP = 13,
- IL_RATE_9M_PLCP = 15,
- IL_RATE_12M_PLCP = 5,
- IL_RATE_18M_PLCP = 7,
- IL_RATE_24M_PLCP = 9,
- IL_RATE_36M_PLCP = 11,
- IL_RATE_48M_PLCP = 1,
- IL_RATE_54M_PLCP = 3,
- IL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
- IL_RATE_1M_PLCP = 10,
- IL_RATE_2M_PLCP = 20,
- IL_RATE_5M_PLCP = 55,
- IL_RATE_11M_PLCP = 110,
- /*FIXME:RS:add IL_RATE_LEGACY_INVM_PLCP = 0,*/
+ RATE_6M_PLCP = 13,
+ RATE_9M_PLCP = 15,
+ RATE_12M_PLCP = 5,
+ RATE_18M_PLCP = 7,
+ RATE_24M_PLCP = 9,
+ RATE_36M_PLCP = 11,
+ RATE_48M_PLCP = 1,
+ RATE_54M_PLCP = 3,
+ RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
+ RATE_1M_PLCP = 10,
+ RATE_2M_PLCP = 20,
+ RATE_5M_PLCP = 55,
+ RATE_11M_PLCP = 110,
+ /*FIXME:RS:add RATE_LEGACY_INVM_PLCP = 0,*/
};
/* uCode API values for OFDM high-throughput (HT) bit rates */
enum {
- IL_RATE_SISO_6M_PLCP = 0,
- IL_RATE_SISO_12M_PLCP = 1,
- IL_RATE_SISO_18M_PLCP = 2,
- IL_RATE_SISO_24M_PLCP = 3,
- IL_RATE_SISO_36M_PLCP = 4,
- IL_RATE_SISO_48M_PLCP = 5,
- IL_RATE_SISO_54M_PLCP = 6,
- IL_RATE_SISO_60M_PLCP = 7,
- IL_RATE_MIMO2_6M_PLCP = 0x8,
- IL_RATE_MIMO2_12M_PLCP = 0x9,
- IL_RATE_MIMO2_18M_PLCP = 0xa,
- IL_RATE_MIMO2_24M_PLCP = 0xb,
- IL_RATE_MIMO2_36M_PLCP = 0xc,
- IL_RATE_MIMO2_48M_PLCP = 0xd,
- IL_RATE_MIMO2_54M_PLCP = 0xe,
- IL_RATE_MIMO2_60M_PLCP = 0xf,
- IL_RATE_SISO_INVM_PLCP,
- IL_RATE_MIMO2_INVM_PLCP = IL_RATE_SISO_INVM_PLCP,
+ RATE_SISO_6M_PLCP = 0,
+ RATE_SISO_12M_PLCP = 1,
+ RATE_SISO_18M_PLCP = 2,
+ RATE_SISO_24M_PLCP = 3,
+ RATE_SISO_36M_PLCP = 4,
+ RATE_SISO_48M_PLCP = 5,
+ RATE_SISO_54M_PLCP = 6,
+ RATE_SISO_60M_PLCP = 7,
+ RATE_MIMO2_6M_PLCP = 0x8,
+ RATE_MIMO2_12M_PLCP = 0x9,
+ RATE_MIMO2_18M_PLCP = 0xa,
+ RATE_MIMO2_24M_PLCP = 0xb,
+ RATE_MIMO2_36M_PLCP = 0xc,
+ RATE_MIMO2_48M_PLCP = 0xd,
+ RATE_MIMO2_54M_PLCP = 0xe,
+ RATE_MIMO2_60M_PLCP = 0xf,
+ RATE_SISO_INVM_PLCP,
+ RATE_MIMO2_INVM_PLCP = RATE_SISO_INVM_PLCP,
};
/* MAC header values for bit rates */
enum {
- IL_RATE_6M_IEEE = 12,
- IL_RATE_9M_IEEE = 18,
- IL_RATE_12M_IEEE = 24,
- IL_RATE_18M_IEEE = 36,
- IL_RATE_24M_IEEE = 48,
- IL_RATE_36M_IEEE = 72,
- IL_RATE_48M_IEEE = 96,
- IL_RATE_54M_IEEE = 108,
- IL_RATE_60M_IEEE = 120,
- IL_RATE_1M_IEEE = 2,
- IL_RATE_2M_IEEE = 4,
- IL_RATE_5M_IEEE = 11,
- IL_RATE_11M_IEEE = 22,
+ RATE_6M_IEEE = 12,
+ RATE_9M_IEEE = 18,
+ RATE_12M_IEEE = 24,
+ RATE_18M_IEEE = 36,
+ RATE_24M_IEEE = 48,
+ RATE_36M_IEEE = 72,
+ RATE_48M_IEEE = 96,
+ RATE_54M_IEEE = 108,
+ RATE_60M_IEEE = 120,
+ RATE_1M_IEEE = 2,
+ RATE_2M_IEEE = 4,
+ RATE_5M_IEEE = 11,
+ RATE_11M_IEEE = 22,
};
#define IL_CCK_BASIC_RATES_MASK \
- (IL_RATE_1M_MASK | \
- IL_RATE_2M_MASK)
+ (RATE_1M_MASK | \
+ RATE_2M_MASK)
#define IL_CCK_RATES_MASK \
(IL_CCK_BASIC_RATES_MASK | \
- IL_RATE_5M_MASK | \
- IL_RATE_11M_MASK)
+ RATE_5M_MASK | \
+ RATE_11M_MASK)
#define IL_OFDM_BASIC_RATES_MASK \
- (IL_RATE_6M_MASK | \
- IL_RATE_12M_MASK | \
- IL_RATE_24M_MASK)
+ (RATE_6M_MASK | \
+ RATE_12M_MASK | \
+ RATE_24M_MASK)
#define IL_OFDM_RATES_MASK \
(IL_OFDM_BASIC_RATES_MASK | \
- IL_RATE_9M_MASK | \
- IL_RATE_18M_MASK | \
- IL_RATE_36M_MASK | \
- IL_RATE_48M_MASK | \
- IL_RATE_54M_MASK)
+ RATE_9M_MASK | \
+ RATE_18M_MASK | \
+ RATE_36M_MASK | \
+ RATE_48M_MASK | \
+ RATE_54M_MASK)
#define IL_BASIC_RATES_MASK \
(IL_OFDM_BASIC_RATES_MASK | \
IL_CCK_BASIC_RATES_MASK)
-#define IL_RATES_MASK ((1 << IL_RATE_COUNT) - 1)
-#define IL_RATES_MASK_3945 ((1 << IL_RATE_COUNT_3945) - 1)
+#define RATES_MASK ((1 << RATE_COUNT) - 1)
+#define RATES_MASK_3945 ((1 << RATE_COUNT_3945) - 1)
#define IL_INVALID_VALUE -1
@@ -221,10 +221,10 @@
/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
#define IL_RS_GOOD_RATIO 12800 /* 100% */
-#define IL_RATE_SCALE_SWITCH 10880 /* 85% */
-#define IL_RATE_HIGH_TH 10880 /* 85% */
-#define IL_RATE_INCREASE_TH 6400 /* 50% */
-#define IL_RATE_DECREASE_TH 1920 /* 15% */
+#define RATE_SCALE_SWITCH 10880 /* 85% */
+#define RATE_HIGH_TH 10880 /* 85% */
+#define RATE_INCREASE_TH 6400 /* 50% */
+#define RATE_DECREASE_TH 1920 /* 15% */
/* possible actions when in legacy mode */
#define IL_LEGACY_SWITCH_ANTENNA1 0
@@ -268,7 +268,7 @@
#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
-extern const struct il_rate_info il_rates[IL_RATE_COUNT];
+extern const struct il_rate_info il_rates[RATE_COUNT];
enum il_table_type {
LQ_NONE,
@@ -331,7 +331,7 @@
u8 max_search; /* maximun number of tables we can search */
s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */
u32 current_rate; /* rate_n_flags, uCode API format */
- struct il_rate_scale_data win[IL_RATE_COUNT]; /* rate histories */
+ struct il_rate_scale_data win[RATE_COUNT]; /* rate histories */
};
struct il_traffic_load {
@@ -371,7 +371,7 @@
u8 is_dup;
enum ieee80211_band band;
- /* The following are bitmaps of rates; IL_RATE_6M_MASK, etc. */
+ /* The following are bitmaps of rates; RATE_6M_MASK, etc. */
u32 supp_rates;
u16 active_legacy_rate;
u16 active_siso_rate;
diff --git a/drivers/net/wireless/iwlegacy/iwl-sta.c b/drivers/net/wireless/iwlegacy/iwl-sta.c
index 3c354a8..dcaa3fb 100644
--- a/drivers/net/wireless/iwlegacy/iwl-sta.c
+++ b/drivers/net/wireless/iwlegacy/iwl-sta.c
@@ -314,7 +314,7 @@
/* 3945 only */
rate = (il->band == IEEE80211_BAND_5GHZ) ?
- IL_RATE_6M_PLCP : IL_RATE_1M_PLCP;
+ RATE_6M_PLCP : RATE_1M_PLCP;
/* Turn on both antennas for the station... */
station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK);
diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
index c602570..1fc9bfb 100644
--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -1654,7 +1654,7 @@
{
int i;
- for (i = 0; i < IL_RATE_COUNT_LEGACY; i++) {
+ for (i = 0; i < RATE_COUNT_LEGACY; i++) {
rates[i].bitrate = il3945_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
@@ -2239,7 +2239,7 @@
ieee80211_wake_queues(il->hw);
- il->active_rate = IL_RATES_MASK_3945;
+ il->active_rate = RATES_MASK_3945;
il_power_update_mode(il, true);
@@ -2642,11 +2642,11 @@
switch (il->scan_band) {
case IEEE80211_BAND_2GHZ:
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- scan->tx_cmd.rate = IL_RATE_1M_PLCP;
+ scan->tx_cmd.rate = RATE_1M_PLCP;
band = IEEE80211_BAND_2GHZ;
break;
case IEEE80211_BAND_5GHZ:
- scan->tx_cmd.rate = IL_RATE_6M_PLCP;
+ scan->tx_cmd.rate = RATE_6M_PLCP;
band = IEEE80211_BAND_5GHZ;
break;
default:
diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c
index 736c2f5..bc5a008 100644
--- a/drivers/net/wireless/iwlegacy/iwl4965-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c
@@ -1757,7 +1757,7 @@
ieee80211_wake_queues(il->hw);
- il->active_rate = IL_RATES_MASK;
+ il->active_rate = RATES_MASK;
if (il_is_associated_ctx(ctx)) {
struct il_rxon_cmd *active_rxon =
@@ -2711,7 +2711,7 @@
{
int i;
- for (i = 0; i < IL_RATE_COUNT_LEGACY; i++) {
+ for (i = 0; i < RATE_COUNT_LEGACY; i++) {
rates[i].bitrate = il_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
@@ -2721,7 +2721,7 @@
* If CCK != 1M then set short preamble rate flag.
*/
rates[i].flags |=
- (il_rates[i].plcp == IL_RATE_1M_PLCP) ?
+ (il_rates[i].plcp == RATE_1M_PLCP) ?
0 : IEEE80211_RATE_SHORT_PREAMBLE;
}
}