sh: hibernation support
Add Suspend-to-disk / swsusp / CONFIG_HIBERNATION support
to the SuperH architecture.
To suspend, use "swapon /dev/sda2; echo disk > /sys/power/state"
To resume, pass "resume=/dev/sda2" on the kernel command line.
The patch "pm: rework includes, remove arch ifdefs V2" is
needed to allow the generic swsusp code to build properly.
Hibernation is not enabled with this patch though, a patch
setting ARCH_HIBERNATION_POSSIBLE will be submitted later.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index 8f8f4ad..01a4076a37 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -3,6 +3,7 @@
#include <asm-generic/sections.h>
+extern void __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end;
extern char _ebss[];
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
new file mode 100644
index 0000000..5d6d8ab
--- /dev/null
+++ b/arch/sh/include/asm/suspend.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SH_SUSPEND_H
+#define _ASM_SH_SUSPEND_H
+
+static inline int arch_prepare_suspend(void) { return 0; }
+
+#include <asm/ptrace.h>
+
+struct swsusp_arch_regs {
+ struct pt_regs user_regs;
+ unsigned long bank1_regs[8];
+};
+
+#endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 2e1b86e..82a3a15 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -30,5 +30,6 @@
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_DUMP_CODE) += disassemble.o
+obj-$(CONFIG_HIBERNATION) += swsusp.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
index 57cf0e0..99aceb28 100644
--- a/arch/sh/kernel/asm-offsets.c
+++ b/arch/sh/kernel/asm-offsets.c
@@ -12,8 +12,10 @@
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/kbuild.h>
+#include <linux/suspend.h>
#include <asm/thread_info.h>
+#include <asm/suspend.h>
int main(void)
{
@@ -25,5 +27,11 @@
DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block));
+#ifdef CONFIG_HIBERNATION
+ DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
+ DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address));
+ DEFINE(PBE_NEXT, offsetof(struct pbe, next));
+ DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
+#endif
return 0;
}
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index e07c69e..ecab274 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -4,6 +4,8 @@
obj-y := ex.o probe.o entry.o setup-sh3.o
+obj-$(CONFIG_HIBERNATION) += swsusp.o
+
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o
obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index c4829d6..fba6ac2 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -216,7 +216,7 @@
! r9 trashed
! BL=0 on entry, on exit BL=1 (depending on r8).
-restore_regs:
+ENTRY(restore_regs)
mov.l @r15+, r0
mov.l @r15+, r1
mov.l @r15+, r2
@@ -362,8 +362,10 @@
nop
! Save registers / Switch to bank 0
+ mov.l k4, k2 ! keep vector in k2
+ mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3
- mov k4, k2 ! keep vector in k2
+ nop
bra handle_exception_special
nop
@@ -471,6 +473,7 @@
! Save registers / Switch to bank 0
mov.l 5f, k2 ! vector register address
+ mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3
mov.l @k2, k2 ! read out vector and keep in k2
@@ -495,10 +498,10 @@
! k0 contains original stack pointer*
! k1 trashed
! k3 passes original pr*
-! k4 trashed
+! k4 passes SR bitmask
! BL=1 on entry, on exit BL=0.
-save_regs:
+ENTRY(save_regs)
mov #-1, r1
mov.l k1, @-r15 ! set TRA (default: -1)
sts.l macl, @-r15
@@ -518,8 +521,16 @@
mov.l r8, @-r15
mov.l 0f, k3 ! SR bits to set in k3
- mov.l 1f, k4 ! SR bits to clear in k4
+ ! fall-through
+
+! save_low_regs()
+! - modify SR for bank switch
+! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
+! k3 passes bits to set in SR
+! k4 passes bits to clear in SR
+
+ENTRY(save_low_regs)
stc sr, r8
or k3, r8
and k4, r8
@@ -565,6 +576,7 @@
PREF(k0)
! Save registers / Switch to bank 0
+ mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3
mov #-1, k2 ! default vector kept in k2
diff --git a/arch/sh/kernel/cpu/sh3/swsusp.S b/arch/sh/kernel/cpu/sh3/swsusp.S
new file mode 100644
index 0000000..0114542
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/swsusp.S
@@ -0,0 +1,147 @@
+/*
+ * arch/sh/kernel/cpu/sh3/swsusp.S
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+
+#define k0 r0
+#define k1 r1
+#define k2 r2
+#define k3 r3
+#define k4 r4
+
+! swsusp_arch_resume()
+! - copy restore_pblist pages
+! - restore registers from swsusp_arch_regs_cpu0
+
+ENTRY(swsusp_arch_resume)
+ mov.l 1f, r15
+ mov.l 2f, r4
+ mov.l @r4, r4
+
+swsusp_copy_loop:
+ mov r4, r0
+ cmp/eq #0, r0
+ bt swsusp_restore_regs
+
+ mov.l @(PBE_ADDRESS, r4), r2
+ mov.l @(PBE_ORIG_ADDRESS, r4), r5
+
+ mov #(PAGE_SIZE >> 10), r3
+ shll8 r3
+ shlr2 r3 /* PAGE_SIZE / 16 */
+swsusp_copy_page:
+ dt r3
+ mov.l @r2+,r1 /* 16n+0 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+4 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+8 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+12 */
+ mov.l r1,@r5
+ bf/s swsusp_copy_page
+ add #4,r5
+
+ bra swsusp_copy_loop
+ mov.l @(PBE_NEXT, r4), r4
+
+swsusp_restore_regs:
+ ! BL=0: R7->R0 is bank0
+ mov.l 3f, r8
+ mov.l 4f, r5
+ jsr @r5
+ nop
+
+ ! BL=1: R7->R0 is bank1
+ lds k2, pr
+ ldc k3, ssr
+
+ mov.l @r15+, r0
+ mov.l @r15+, r1
+ mov.l @r15+, r2
+ mov.l @r15+, r3
+ mov.l @r15+, r4
+ mov.l @r15+, r5
+ mov.l @r15+, r6
+ mov.l @r15+, r7
+
+ rte
+ nop
+ ! BL=0: R7->R0 is bank0
+
+ .align 2
+1: .long swsusp_arch_regs_cpu0
+2: .long restore_pblist
+3: .long 0x20000000 ! RB=1
+4: .long restore_regs
+
+! swsusp_arch_suspend()
+! - prepare pc for resume, return from function without swsusp_save on resume
+! - save registers in swsusp_arch_regs_cpu0
+! - call swsusp_save write suspend image
+
+ENTRY(swsusp_arch_suspend)
+ sts pr, r0 ! save pr in r0
+ mov r15, r2 ! save sp in r2
+ mov r8, r5 ! save r8 in r5
+ stc sr, r1
+ ldc r1, ssr ! save sr in ssr
+ mov.l 1f, r1
+ ldc r1, spc ! setup pc value for resuming
+ mov.l 5f, r15 ! use swsusp_arch_regs_cpu0 as stack
+ mov.l 6f, r3
+ add r3, r15 ! save from top of structure
+
+ ! BL=0: R7->R0 is bank0
+ mov.l 2f, r3 ! get new SR value for bank1
+ mov #0, r4
+ mov.l 7f, r1
+ jsr @r1 ! switch to bank1 and save bank1 r7->r0
+ not r4, r4
+
+ ! BL=1: R7->R0 is bank1
+ stc r2_bank, k0 ! fetch old sp from r2_bank0
+ mov.l 3f, k4 ! SR bits to clear in k4
+ mov.l 8f, k1
+ jsr @k1 ! switch to bank0 and save all regs
+ stc r0_bank, k3 ! fetch old pr from r0_bank0
+
+ ! BL=0: R7->R0 is bank0
+ mov r2, r15 ! restore old sp
+ mov r5, r8 ! restore old r8
+ stc ssr, r1
+ ldc r1, sr ! restore old sr
+ lds r0, pr ! restore old pr
+ mov.l 4f, r0
+ jmp @r0
+ nop
+
+swsusp_call_save:
+ mov r2, r15 ! restore old sp
+ mov r5, r8 ! restore old r8
+ lds r0, pr ! restore old pr
+ rts
+ mov #0, r0
+
+ .align 2
+1: .long swsusp_call_save
+2: .long 0x20000000 ! RB=1
+3: .long 0xdfffffff ! RB=0
+4: .long swsusp_save
+5: .long swsusp_arch_regs_cpu0
+6: .long SWSUSP_ARCH_REGS_SIZE
+7: .long save_low_regs
+8: .long save_regs
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index d608557..203b183 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -5,6 +5,7 @@
obj-y := probe.o common.o
common-y += $(addprefix ../sh3/, entry.o ex.o)
+obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o)
obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o
obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
diff --git a/arch/sh/kernel/swsusp.c b/arch/sh/kernel/swsusp.c
new file mode 100644
index 0000000..12b64a0
--- /dev/null
+++ b/arch/sh/kernel/swsusp.c
@@ -0,0 +1,38 @@
+/*
+ * swsusp.c - SuperH hibernation support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/fpu.h>
+
+struct swsusp_arch_regs swsusp_arch_regs_cpu0;
+
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+ unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
+
+ return (pfn >= begin_pfn) && (pfn < end_pfn);
+}
+
+void save_processor_state(void)
+{
+ init_fpu(current);
+}
+
+void restore_processor_state(void)
+{
+ local_flush_tlb_all();
+}